Merge r1780441, r1780470, r1795928 from trunk:

buildconf: allow configuration without APR sources

Previously we required copying the APR (and APR-util) source code into
srclib or some other location on disk in order to build httpd directly
from source. This is annoying if you're on a distribution that already
has the required files in its APR dev packages.

Practically speaking, if you're not building an official distribution
tarball, you only need the following files:

1) config.guess
2) config.sub
3) find_apr.m4
4) find_apu.m4
5) PrintPath

1 and 2 come from automake. 3 and 4 are included in some distributions'
(e.g. Debian's) development packages for APR/-util. That leaves
PrintPath, which has not changed meaningfully in over a decade and is
checked in completely here.

Passing an apr-config executable to buildconf's --with-apr option will
now enable a mode in which the above files (minus PrintPath) are copied
from their respective homes, removing the need for APR sources on disk.
Otherwise, if a source tree is passed, the current behavior is retained
and all of the above files are copied from APR directly.

buildconf: add --help for the new behavior

buildconf's behavior is a little complicated (and was made more so with
apr-config mode), so add some self-documentation.

buildconf: check in APR[-util] m4 macros

Suggestion by wrowe. These files haven't changed in years; since we need
them anyway, check them in directly. buildconf will still copy over the
latest versions during setup, and SVN will tell us if there are any
changes.

Submitted by: jchampion
Reviewed by: jchampion, jim, ylavic


git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/branches/2.4.x@1807761 13f79535-47bb-0310-9956-ffa450edef68

4 files changed, 1533 insertions, 0 deletions

diff --git a/build/PrintPath b/build/PrintPath
new file mode 100755
index 0000000000..2a2b48b634
--- /dev/null
+++ b/build/PrintPath
@@ -0,0 +1,130 @@
+#!/bin/sh
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#
+# Look for program[s] somewhere in $PATH.
+#
+# Options:
+#  -s
+#    Do not print out full pathname. (silent)
+#  -pPATHNAME
+#    Look in PATHNAME instead of $PATH
+#
+# Usage:
+#  PrintPath [-s] [-pPATHNAME] program [program ...]
+#
+# Initially written by Jim Jagielski for the Apache configuration mechanism
+#  (with kudos to Kernighan/Pike)
+
+##
+# Some "constants"
+##
+pathname=$PATH
+echo="yes"
+
+##
+# Find out what OS we are running for later on
+##
+os=`(uname) 2>/dev/null`
+
+##
+# Parse command line
+##
+for args in $*
+do
+    case $args in
+	-s  ) echo="no" ;;
+	-p* ) pathname="`echo $args | sed 's/^..//'`" ;;
+	*   ) programs="$programs $args" ;;
+    esac
+done
+
+##
+# Now we make the adjustments required for OS/2 and everyone
+# else :)
+#
+# First of all, all OS/2 programs have the '.exe' extension.
+# Next, we adjust PATH (or what was given to us as PATH) to
+# be whitespace separated directories.
+# Finally, we try to determine the best flag to use for
+# test/[] to look for an executable file. OS/2 just has '-r'
+# but with other OSs, we do some funny stuff to check to see
+# if test/[] knows about -x, which is the prefered flag.
+##
+
+if [ "x$os" = "xOS/2" ]
+then
+    ext=".exe"
+    pathname=`echo -E $pathname |
+     sed 's/^;/.;/
+	  s/;;/;.;/g
+	  s/;$/;./
+	  s/;/ /g
+	  s/\\\\/\\//g' `
+    test_exec_flag="-r"
+else
+    ext=""	# No default extensions
+    pathname=`echo $pathname |
+     sed 's/^:/.:/
+	  s/::/:.:/g
+	  s/:$/:./
+	  s/:/ /g' `
+    # Here is how we test to see if test/[] can handle -x
+    testfile="pp.t.$$"
+
+    cat > $testfile <<ENDTEST
+#!/bin/sh
+if [ -x / ] || [ -x /bin ] || [ -x /bin/ls ]; then
+    exit 0
+fi
+exit 1
+ENDTEST
+
+    if `/bin/sh $testfile 2>/dev/null`; then
+	test_exec_flag="-x"
+    else
+	test_exec_flag="-r"
+    fi
+    rm -f $testfile
+fi
+
+for program in $programs
+do
+    for path in $pathname
+    do
+	if [ $test_exec_flag $path/${program}${ext} ] && \
+	   [ ! -d $path/${program}${ext} ]; then
+	    if [ "x$echo" = "xyes" ]; then
+		echo $path/${program}${ext}
+	    fi
+	    exit 0
+	fi
+
+# Next try without extension (if one was used above)
+	if [ "x$ext" != "x" ]; then
+            if [ $test_exec_flag $path/${program} ] && \
+               [ ! -d $path/${program} ]; then
+                if [ "x$echo" = "xyes" ]; then
+                    echo $path/${program}
+                fi
+                exit 0
+            fi
+        fi
+    done
+done
+exit 1
+
diff --git a/build/apr_common.m4 b/build/apr_common.m4
new file mode 100644
index 0000000000..6b5c0f033b
--- /dev/null
+++ b/build/apr_common.m4
@@ -0,0 +1,990 @@
+dnl -------------------------------------------------------- -*- autoconf -*-
+dnl Licensed to the Apache Software Foundation (ASF) under one or more
+dnl contributor license agreements.  See the NOTICE file distributed with
+dnl this work for additional information regarding copyright ownership.
+dnl The ASF licenses this file to You under the Apache License, Version 2.0
+dnl (the "License"); you may not use this file except in compliance with
+dnl the License.  You may obtain a copy of the License at
+dnl
+dnl     http://www.apache.org/licenses/LICENSE-2.0
+dnl
+dnl Unless required by applicable law or agreed to in writing, software
+dnl distributed under the License is distributed on an "AS IS" BASIS,
+dnl WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+dnl See the License for the specific language governing permissions and
+dnl limitations under the License.
+
+dnl
+dnl apr_common.m4: APR's general-purpose autoconf macros
+dnl
+
+dnl
+dnl APR_CONFIG_NICE(filename)
+dnl
+dnl Saves a snapshot of the configure command-line for later reuse
+dnl
+AC_DEFUN([APR_CONFIG_NICE], [
+  rm -f $1
+  cat >$1<<EOF
+#! /bin/sh
+#
+# Created by configure
+
+EOF
+  if test -n "$CC"; then
+    echo "CC=\"$CC\"; export CC" >> $1
+  fi
+  if test -n "$CFLAGS"; then
+    echo "CFLAGS=\"$CFLAGS\"; export CFLAGS" >> $1
+  fi
+  if test -n "$CPPFLAGS"; then
+    echo "CPPFLAGS=\"$CPPFLAGS\"; export CPPFLAGS" >> $1
+  fi
+  if test -n "$LDFLAGS"; then
+    echo "LDFLAGS=\"$LDFLAGS\"; export LDFLAGS" >> $1
+  fi
+  if test -n "$LTFLAGS"; then
+    echo "LTFLAGS=\"$LTFLAGS\"; export LTFLAGS" >> $1
+  fi
+  if test -n "$LIBS"; then
+    echo "LIBS=\"$LIBS\"; export LIBS" >> $1
+  fi
+  if test -n "$INCLUDES"; then
+    echo "INCLUDES=\"$INCLUDES\"; export INCLUDES" >> $1
+  fi
+  if test -n "$NOTEST_CFLAGS"; then
+    echo "NOTEST_CFLAGS=\"$NOTEST_CFLAGS\"; export NOTEST_CFLAGS" >> $1
+  fi
+  if test -n "$NOTEST_CPPFLAGS"; then
+    echo "NOTEST_CPPFLAGS=\"$NOTEST_CPPFLAGS\"; export NOTEST_CPPFLAGS" >> $1
+  fi
+  if test -n "$NOTEST_LDFLAGS"; then
+    echo "NOTEST_LDFLAGS=\"$NOTEST_LDFLAGS\"; export NOTEST_LDFLAGS" >> $1
+  fi
+  if test -n "$NOTEST_LIBS"; then
+    echo "NOTEST_LIBS=\"$NOTEST_LIBS\"; export NOTEST_LIBS" >> $1
+  fi
+
+  # Retrieve command-line arguments.
+  eval "set x $[0] $ac_configure_args"
+  shift
+
+  for arg
+  do
+    APR_EXPAND_VAR(arg, $arg)
+    echo "\"[$]arg\" \\" >> $1
+  done
+  echo '"[$]@"' >> $1
+  chmod +x $1
+])dnl
+
+dnl APR_MKDIR_P_CHECK(fallback-mkdir-p)
+dnl checks whether mkdir -p works
+AC_DEFUN([APR_MKDIR_P_CHECK], [
+  AC_CACHE_CHECK(for working mkdir -p, ac_cv_mkdir_p,[
+    test -d conftestdir && rm -rf conftestdir
+    mkdir -p conftestdir/somedir >/dev/null 2>&1
+    if test -d conftestdir/somedir; then
+      ac_cv_mkdir_p=yes
+    else
+      ac_cv_mkdir_p=no
+    fi
+    rm -rf conftestdir
+  ])
+  if test "$ac_cv_mkdir_p" = "yes"; then
+      mkdir_p="mkdir -p"
+  else
+      mkdir_p="$1"
+  fi
+])
+
+dnl
+dnl APR_SUBDIR_CONFIG(dir [, sub-package-cmdline-args, args-to-drop])
+dnl
+dnl dir: directory to find configure in
+dnl sub-package-cmdline-args: arguments to add to the invocation (optional)
+dnl args-to-drop: arguments to drop from the invocation (optional)
+dnl
+dnl Note: This macro relies on ac_configure_args being set properly.
+dnl
+dnl The args-to-drop argument is shoved into a case statement, so
+dnl multiple arguments can be separated with a |.
+dnl
+dnl Note: Older versions of autoconf do not single-quote args, while 2.54+
+dnl places quotes around every argument.  So, if you want to drop the
+dnl argument called --enable-layout, you must pass the third argument as:
+dnl [--enable-layout=*|\'--enable-layout=*]
+dnl
+dnl Trying to optimize this is left as an exercise to the reader who wants
+dnl to put up with more autoconf craziness.  I give up.
+dnl
+AC_DEFUN([APR_SUBDIR_CONFIG], [
+  # save our work to this point; this allows the sub-package to use it
+  AC_CACHE_SAVE
+
+  echo "configuring package in $1 now"
+  ac_popdir=`pwd`
+  apr_config_subdirs="$1"
+  test -d $1 || $mkdir_p $1
+  ac_abs_srcdir=`(cd $srcdir/$1 && pwd)`
+  cd $1
+
+changequote(, )dnl
+      # A "../" for each directory in /$config_subdirs.
+      ac_dots=`echo $apr_config_subdirs|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
+changequote([, ])dnl
+
+  # Make the cache file pathname absolute for the subdirs
+  # required to correctly handle subdirs that might actually
+  # be symlinks
+  case "$cache_file" in
+  /*) # already absolute
+    ac_sub_cache_file=$cache_file ;;
+  *)  # Was relative path.
+    ac_sub_cache_file="$ac_popdir/$cache_file" ;;
+  esac
+
+  ifelse($3, [], [apr_configure_args=$ac_configure_args],[
+  apr_configure_args=
+  apr_sep=
+  for apr_configure_arg in $ac_configure_args
+  do
+    case "$apr_configure_arg" in
+      $3)
+        continue ;;
+    esac
+    apr_configure_args="$apr_configure_args$apr_sep'$apr_configure_arg'"
+    apr_sep=" "
+  done
+  ])
+
+  dnl autoconf doesn't add --silent to ac_configure_args; explicitly pass it
+  test "x$silent" = "xyes" && apr_configure_args="$apr_configure_args --silent"
+
+  dnl AC_CONFIG_SUBDIRS silences option warnings, emulate this for 2.62
+  apr_configure_args="--disable-option-checking $apr_configure_args" 
+
+  dnl The eval makes quoting arguments work - specifically the second argument
+  dnl where the quoting mechanisms used is "" rather than [].
+  dnl
+  dnl We need to execute another shell because some autoconf/shell combinations
+  dnl will choke after doing repeated APR_SUBDIR_CONFIG()s.  (Namely Solaris
+  dnl and autoconf-2.54+)
+  if eval $SHELL $ac_abs_srcdir/configure $apr_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_abs_srcdir $2
+  then :
+    echo "$1 configured properly"
+  else
+    echo "configure failed for $1"
+    exit 1
+  fi
+
+  cd $ac_popdir
+
+  # grab any updates from the sub-package
+  AC_CACHE_LOAD
+])dnl
+
+dnl
+dnl APR_SAVE_THE_ENVIRONMENT(variable_name)
+dnl
+dnl Stores the variable (usually a Makefile macro) for later restoration
+dnl
+AC_DEFUN([APR_SAVE_THE_ENVIRONMENT], [
+  apr_ste_save_$1="$$1"
+])dnl
+
+dnl
+dnl APR_RESTORE_THE_ENVIRONMENT(variable_name, prefix_)
+dnl
+dnl Uses the previously saved variable content to figure out what configure
+dnl has added to the variable, moving the new bits to prefix_variable_name
+dnl and restoring the original variable contents.  This makes it possible
+dnl for a user to override configure when it does something stupid.
+dnl
+AC_DEFUN([APR_RESTORE_THE_ENVIRONMENT], [
+dnl Check whether $apr_ste_save_$1 is empty or
+dnl only whitespace. The verbatim "X" is token number 1,
+dnl the following whitespace will be ignored.
+set X $apr_ste_save_$1
+if test ${#} -eq 1; then
+  $2$1="$$1"
+  $1=
+else
+  if test "x$apr_ste_save_$1" = "x$$1"; then
+    $2$1=
+  else
+    $2$1=`echo "$$1" | sed -e "s%${apr_ste_save_$1}%%"`
+    $1="$apr_ste_save_$1"
+  fi
+fi
+if test "x$silent" != "xyes"; then
+  echo "  restoring $1 to \"$$1\""
+  echo "  setting $2$1 to \"$$2$1\""
+fi
+AC_SUBST($2$1)
+])dnl
+
+dnl
+dnl APR_SETIFNULL(variable, value)
+dnl
+dnl  Set variable iff it's currently null
+dnl
+AC_DEFUN([APR_SETIFNULL], [
+  if test -z "$$1"; then
+    test "x$silent" != "xyes" && echo "  setting $1 to \"$2\""
+    $1="$2"
+  fi
+])dnl
+
+dnl
+dnl APR_SETVAR(variable, value)
+dnl
+dnl  Set variable no matter what
+dnl
+AC_DEFUN([APR_SETVAR], [
+  test "x$silent" != "xyes" && echo "  forcing $1 to \"$2\""
+  $1="$2"
+])dnl
+
+dnl
+dnl APR_ADDTO(variable, value)
+dnl
+dnl  Add value to variable
+dnl
+AC_DEFUN([APR_ADDTO], [
+  if test "x$$1" = "x"; then
+    test "x$silent" != "xyes" && echo "  setting $1 to \"$2\""
+    $1="$2"
+  else
+    apr_addto_bugger="$2"
+    for i in $apr_addto_bugger; do
+      apr_addto_duplicate="0"
+      for j in $$1; do
+        if test "x$i" = "x$j"; then
+          apr_addto_duplicate="1"
+          break
+        fi
+      done
+      if test $apr_addto_duplicate = "0"; then
+        test "x$silent" != "xyes" && echo "  adding \"$i\" to $1"
+        $1="$$1 $i"
+      fi
+    done
+  fi
+])dnl
+
+dnl
+dnl APR_REMOVEFROM(variable, value)
+dnl
+dnl Remove a value from a variable
+dnl
+AC_DEFUN([APR_REMOVEFROM], [
+  if test "x$$1" = "x$2"; then
+    test "x$silent" != "xyes" && echo "  nulling $1"
+    $1=""
+  else
+    apr_new_bugger=""
+    apr_removed=0
+    for i in $$1; do
+      if test "x$i" != "x$2"; then
+        apr_new_bugger="$apr_new_bugger $i"
+      else
+        apr_removed=1
+      fi
+    done
+    if test $apr_removed = "1"; then
+      test "x$silent" != "xyes" && echo "  removed \"$2\" from $1"
+      $1=$apr_new_bugger
+    fi
+  fi
+]) dnl
+
+dnl
+dnl APR_CHECK_DEFINE_FILES( symbol, header_file [header_file ...] )
+dnl
+AC_DEFUN([APR_CHECK_DEFINE_FILES], [
+  AC_CACHE_CHECK([for $1 in $2],ac_cv_define_$1,[
+    ac_cv_define_$1=no
+    for curhdr in $2
+    do
+      AC_EGREP_CPP(YES_IS_DEFINED, [
+#include <$curhdr>
+#ifdef $1
+YES_IS_DEFINED
+#endif
+      ], ac_cv_define_$1=yes)
+    done
+  ])
+  if test "$ac_cv_define_$1" = "yes"; then
+    AC_DEFINE(HAVE_$1, 1, [Define if $1 is defined])
+  fi
+])
+
+
+dnl
+dnl APR_CHECK_DEFINE(symbol, header_file)
+dnl
+AC_DEFUN([APR_CHECK_DEFINE], [
+  AC_CACHE_CHECK([for $1 in $2],ac_cv_define_$1,[
+    AC_EGREP_CPP(YES_IS_DEFINED, [
+#include <$2>
+#ifdef $1
+YES_IS_DEFINED
+#endif
+    ], ac_cv_define_$1=yes, ac_cv_define_$1=no)
+  ])
+  if test "$ac_cv_define_$1" = "yes"; then
+    AC_DEFINE(HAVE_$1, 1, [Define if $1 is defined in $2])
+  fi
+])
+
+dnl
+dnl APR_CHECK_APR_DEFINE( symbol )
+dnl
+AC_DEFUN([APR_CHECK_APR_DEFINE], [
+apr_old_cppflags=$CPPFLAGS
+CPPFLAGS="$CPPFLAGS $INCLUDES"
+AC_EGREP_CPP(YES_IS_DEFINED, [
+#include <apr.h>
+#if $1
+YES_IS_DEFINED
+#endif
+], ac_cv_define_$1=yes, ac_cv_define_$1=no)
+CPPFLAGS=$apr_old_cppflags
+])
+
+dnl APR_CHECK_FILE(filename); set ac_cv_file_filename to
+dnl "yes" if 'filename' is readable, else "no".
+dnl @deprecated! - use AC_CHECK_FILE instead
+AC_DEFUN([APR_CHECK_FILE], [
+dnl Pick a safe variable name
+define([apr_cvname], ac_cv_file_[]translit([$1], [./+-], [__p_]))
+AC_CACHE_CHECK([for $1], [apr_cvname],
+[if test -r $1; then
+   apr_cvname=yes
+ else
+   apr_cvname=no
+ fi])
+])
+
+define(APR_IFALLYES,[dnl
+ac_rc=yes
+for ac_spec in $1; do
+    ac_type=`echo "$ac_spec" | sed -e 's/:.*$//'`
+    ac_item=`echo "$ac_spec" | sed -e 's/^.*://'`
+    case $ac_type in
+        header )
+            ac_item=`echo "$ac_item" | sed 'y%./+-%__p_%'`
+            ac_var="ac_cv_header_$ac_item"
+            ;;
+        file )
+            ac_item=`echo "$ac_item" | sed 'y%./+-%__p_%'`
+            ac_var="ac_cv_file_$ac_item"
+            ;;
+        func )   ac_var="ac_cv_func_$ac_item"   ;;
+        struct ) ac_var="ac_cv_struct_$ac_item" ;;
+        define ) ac_var="ac_cv_define_$ac_item" ;;
+        custom ) ac_var="$ac_item" ;;
+    esac
+    eval "ac_val=\$$ac_var"
+    if test ".$ac_val" != .yes; then
+        ac_rc=no
+        break
+    fi
+done
+if test ".$ac_rc" = .yes; then
+    :
+    $2
+else
+    :
+    $3
+fi
+])
+
+
+define(APR_BEGIN_DECISION,[dnl
+ac_decision_item='$1'
+ac_decision_msg='FAILED'
+ac_decision=''
+])
+
+
+AC_DEFUN([APR_DECIDE],[dnl
+dnl Define the flag (or not) in apr_private.h via autoheader
+AH_TEMPLATE($1, [Define if $2 will be used])
+ac_decision='$1'
+ac_decision_msg='$2'
+ac_decision_$1=yes
+ac_decision_$1_msg='$2'
+])
+
+
+define(APR_DECISION_OVERRIDE,[dnl
+    ac_decision=''
+    for ac_item in $1; do
+         eval "ac_decision_this=\$ac_decision_${ac_item}"
+         if test ".$ac_decision_this" = .yes; then
+             ac_decision=$ac_item
+             eval "ac_decision_msg=\$ac_decision_${ac_item}_msg"
+         fi
+    done
+])
+
+
+define(APR_DECISION_FORCE,[dnl
+ac_decision="$1"
+eval "ac_decision_msg=\"\$ac_decision_${ac_decision}_msg\""
+])
+
+
+define(APR_END_DECISION,[dnl
+if test ".$ac_decision" = .; then
+    echo "[$]0:Error: decision on $ac_decision_item failed" 1>&2
+    exit 1
+else
+    if test ".$ac_decision_msg" = .; then
+        ac_decision_msg="$ac_decision"
+    fi
+    AC_DEFINE_UNQUOTED(${ac_decision_item})
+    AC_MSG_RESULT([decision on $ac_decision_item... $ac_decision_msg])
+fi
+])
+
+
+dnl
+dnl APR_CHECK_SIZEOF_EXTENDED(INCLUDES, TYPE [, CROSS_SIZE])
+dnl
+dnl A variant of AC_CHECK_SIZEOF which allows the checking of
+dnl sizes of non-builtin types
+dnl
+AC_DEFUN([APR_CHECK_SIZEOF_EXTENDED],
+[changequote(<<, >>)dnl
+dnl The name to #define.
+define(<<AC_TYPE_NAME>>, translit(sizeof_$2, [a-z *], [A-Z_P]))dnl
+dnl The cache variable name.
+define(<<AC_CV_NAME>>, translit(ac_cv_sizeof_$2, [ *], [_p]))dnl
+changequote([, ])dnl
+AC_MSG_CHECKING(size of $2)
+AC_CACHE_VAL(AC_CV_NAME,
+[AC_TRY_RUN([#include <stdio.h>
+$1
+#ifdef WIN32
+#define binmode "b"
+#else
+#define binmode
+#endif
+main()
+{
+  FILE *f=fopen("conftestval", "w" binmode);
+  if (!f) exit(1);
+  fprintf(f, "%d\n", sizeof($2));
+  exit(0);
+}], AC_CV_NAME=`cat conftestval`, AC_CV_NAME=0, ifelse([$3],,,
+AC_CV_NAME=$3))])dnl
+AC_MSG_RESULT($AC_CV_NAME)
+AC_DEFINE_UNQUOTED(AC_TYPE_NAME, $AC_CV_NAME, [The size of ]$2)
+undefine([AC_TYPE_NAME])dnl
+undefine([AC_CV_NAME])dnl
+])
+
+
+dnl
+dnl APR_TRY_COMPILE_NO_WARNING(INCLUDES, FUNCTION-BODY,
+dnl             [ACTIONS-IF-NO-WARNINGS], [ACTIONS-IF-WARNINGS])
+dnl
+dnl Tries a compile test with warnings activated so that the result
+dnl is false if the code doesn't compile cleanly.  For compilers
+dnl where it is not known how to activate a "fail-on-error" mode,
+dnl it is undefined which of the sets of actions will be run.
+dnl
+AC_DEFUN([APR_TRY_COMPILE_NO_WARNING],
+[apr_save_CFLAGS=$CFLAGS
+ CFLAGS="$CFLAGS $CFLAGS_WARN"
+ if test "$ac_cv_prog_gcc" = "yes"; then 
+   CFLAGS="$CFLAGS -Werror"
+ fi
+ AC_COMPILE_IFELSE(
+  [AC_LANG_SOURCE(
+   [#include "confdefs.h"
+   ]
+   [[$1]]
+   [int main(int argc, const char *const *argv) {]
+   [[$2]]
+   [   return 0; }]
+  )],
+  [$3], [$4])
+ CFLAGS=$apr_save_CFLAGS
+])
+
+dnl
+dnl APR_CHECK_STRERROR_R_RC
+dnl
+dnl  Decide which style of retcode is used by this system's 
+dnl  strerror_r().  It either returns int (0 for success, -1
+dnl  for failure), or it returns a pointer to the error 
+dnl  string.
+dnl
+dnl
+AC_DEFUN([APR_CHECK_STRERROR_R_RC], [
+AC_MSG_CHECKING(for type of return code from strerror_r)
+AC_TRY_RUN([
+#include <errno.h>
+#include <string.h>
+#include <stdio.h>
+main()
+{
+  char buf[1024];
+  if (strerror_r(ERANGE, buf, sizeof buf) < 1) {
+    exit(0);
+  }
+  else {
+    exit(1);
+  }
+}], [
+    ac_cv_strerror_r_rc_int=yes ], [
+    ac_cv_strerror_r_rc_int=no ], [
+    ac_cv_strerror_r_rc_int=no ] )
+if test "x$ac_cv_strerror_r_rc_int" = xyes; then
+  AC_DEFINE(STRERROR_R_RC_INT, 1, [Define if strerror returns int])
+  msg="int"
+else
+  msg="pointer"
+fi
+AC_MSG_RESULT([$msg])
+] )
+
+dnl
+dnl APR_CHECK_DIRENT_INODE
+dnl
+dnl  Decide if d_fileno or d_ino are available in the dirent
+dnl  structure on this platform.  Single UNIX Spec says d_ino,
+dnl  BSD uses d_fileno.  Undef to find the real beast.
+dnl
+AC_DEFUN([APR_CHECK_DIRENT_INODE], [
+AC_CACHE_CHECK([for inode member of struct dirent], apr_cv_dirent_inode, [
+apr_cv_dirent_inode=no
+AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <dirent.h>
+],[
+#ifdef d_ino
+#undef d_ino
+#endif
+struct dirent de; de.d_fileno;
+], apr_cv_dirent_inode=d_fileno)
+if test "$apr_cv_dirent_inode" = "no"; then
+AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <dirent.h>
+],[
+#ifdef d_fileno
+#undef d_fileno
+#endif
+struct dirent de; de.d_ino;
+], apr_cv_dirent_inode=d_ino)
+fi
+])
+if test "$apr_cv_dirent_inode" != "no"; then
+  AC_DEFINE_UNQUOTED(DIRENT_INODE, $apr_cv_dirent_inode, 
+    [Define if struct dirent has an inode member])
+fi
+])
+
+dnl
+dnl APR_CHECK_DIRENT_TYPE
+dnl
+dnl  Decide if d_type is available in the dirent structure 
+dnl  on this platform.  Not part of the Single UNIX Spec.
+dnl  Note that this is worthless without DT_xxx macros, so
+dnl  look for one while we are at it.
+dnl
+AC_DEFUN([APR_CHECK_DIRENT_TYPE], [
+AC_CACHE_CHECK([for file type member of struct dirent], apr_cv_dirent_type,[
+apr_cv_dirent_type=no
+AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <dirent.h>
+],[
+struct dirent de; de.d_type = DT_REG;
+], apr_cv_dirent_type=d_type)
+])
+if test "$apr_cv_dirent_type" != "no"; then
+  AC_DEFINE_UNQUOTED(DIRENT_TYPE, $apr_cv_dirent_type, 
+    [Define if struct dirent has a d_type member]) 
+fi
+])
+
+dnl the following is a newline, a space, a tab, and a backslash (the
+dnl backslash is used by the shell to skip newlines, but m4 sees it;
+dnl treat it like whitespace).
+dnl WARNING: don't reindent these lines, or the space/tab will be lost!
+define([apr_whitespace],[
+ 	\])
+
+dnl
+dnl APR_COMMA_ARGS(ARG1 ...)
+dnl  convert the whitespace-separated arguments into comman-separated
+dnl  arguments.
+dnl
+dnl APR_FOREACH(CODE-BLOCK, ARG1, ARG2, ...)
+dnl  subsitute CODE-BLOCK for each ARG[i]. "eachval" will be set to ARG[i]
+dnl  within each iteration.
+dnl
+changequote({,})
+define({APR_COMMA_ARGS},{patsubst([$}{1],[[}apr_whitespace{]+],[,])})
+define({APR_FOREACH},
+  {ifelse($}{2,,,
+          [define([eachval],
+                  $}{2)$}{1[]APR_FOREACH([$}{1],
+                                         builtin([shift],
+                                                 builtin([shift], $}{@)))])})
+changequote([,])
+
+dnl APR_FLAG_HEADERS(HEADER-FILE ... [, FLAG-TO-SET ] [, "yes" ])
+dnl  we set FLAG-TO-SET to 1 if we find HEADER-FILE, otherwise we set to 0
+dnl  if FLAG-TO-SET is null, we automagically determine it's name
+dnl  by changing all "/" to "_" in the HEADER-FILE and dropping
+dnl  all "." and "-" chars. If the 3rd parameter is "yes" then instead of
+dnl  setting to 1 or 0, we set FLAG-TO-SET to yes or no.
+dnl  
+AC_DEFUN([APR_FLAG_HEADERS], [
+AC_CHECK_HEADERS($1)
+for aprt_i in $1
+do
+    ac_safe=`echo "$aprt_i" | sed 'y%./+-%__p_%'`
+    aprt_2=`echo "$aprt_i" | sed -e 's%/%_%g' -e 's/\.//g' -e 's/-//g'`
+    if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+       eval "ifelse($2,,$aprt_2,$2)=ifelse($3,yes,yes,1)"
+    else
+       eval "ifelse($2,,$aprt_2,$2)=ifelse($3,yes,no,0)"
+    fi
+done
+])
+
+dnl APR_FLAG_FUNCS(FUNC ... [, FLAG-TO-SET] [, "yes" ])
+dnl  if FLAG-TO-SET is null, we automagically determine it's name
+dnl  prepending "have_" to the function name in FUNC, otherwise
+dnl  we use what's provided as FLAG-TO-SET. If the 3rd parameter
+dnl  is "yes" then instead of setting to 1 or 0, we set FLAG-TO-SET
+dnl  to yes or no.
+dnl
+AC_DEFUN([APR_FLAG_FUNCS], [
+AC_CHECK_FUNCS($1)
+for aprt_j in $1
+do
+    aprt_3="have_$aprt_j"
+    if eval "test \"`echo '$ac_cv_func_'$aprt_j`\" = yes"; then
+       eval "ifelse($2,,$aprt_3,$2)=ifelse($3,yes,yes,1)"
+    else
+       eval "ifelse($2,,$aprt_3,$2)=ifelse($3,yes,no,0)"
+    fi
+done
+])
+
+dnl Iteratively interpolate the contents of the second argument
+dnl until interpolation offers no new result. Then assign the
+dnl final result to $1.
+dnl
+dnl Example:
+dnl
+dnl foo=1
+dnl bar='${foo}/2'
+dnl baz='${bar}/3'
+dnl APR_EXPAND_VAR(fraz, $baz)
+dnl   $fraz is now "1/2/3"
+dnl 
+AC_DEFUN([APR_EXPAND_VAR], [
+ap_last=
+ap_cur="$2"
+while test "x${ap_cur}" != "x${ap_last}";
+do
+  ap_last="${ap_cur}"
+  ap_cur=`eval "echo ${ap_cur}"`
+done
+$1="${ap_cur}"
+])
+
+dnl
+dnl Removes the value of $3 from the string in $2, strips of any leading
+dnl slashes, and returns the value in $1.
+dnl
+dnl Example:
+dnl orig_path="${prefix}/bar"
+dnl APR_PATH_RELATIVE(final_path, $orig_path, $prefix)
+dnl    $final_path now contains "bar"
+AC_DEFUN([APR_PATH_RELATIVE], [
+ap_stripped=`echo $2 | sed -e "s#^$3##"`
+# check if the stripping was successful
+if test "x$2" != "x${ap_stripped}"; then
+    # it was, so strip of any leading slashes
+    $1="`echo ${ap_stripped} | sed -e 's#^/*##'`"
+else
+    # it wasn't so return the original
+    $1="$2"
+fi
+])
+
+dnl APR_HELP_STRING(LHS, RHS)
+dnl Autoconf 2.50 can not handle substr correctly.  It does have 
+dnl AC_HELP_STRING, so let's try to call it if we can.
+dnl Note: this define must be on one line so that it can be properly returned
+dnl as the help string.  When using this macro with a multi-line RHS, ensure
+dnl that you surround the macro invocation with []s
+AC_DEFUN([APR_HELP_STRING], [ifelse(regexp(AC_ACVERSION, 2\.1), -1, AC_HELP_STRING([$1],[$2]),[  ][$1] substr([                       ],len($1))[$2])])
+
+dnl
+dnl APR_LAYOUT(configlayout, layoutname [, extravars])
+dnl
+AC_DEFUN([APR_LAYOUT], [
+  if test ! -f $srcdir/config.layout; then
+    echo "** Error: Layout file $srcdir/config.layout not found"
+    echo "** Error: Cannot use undefined layout '$LAYOUT'"
+    exit 1
+  fi
+  # Catch layout names including a slash which will otherwise
+  # confuse the heck out of the sed script.
+  case $2 in
+  */*) 
+    echo "** Error: $2 is not a valid layout name"
+    exit 1 ;;
+  esac
+  pldconf=./config.pld
+  changequote({,})
+  sed -e "1s/[ 	]*<[lL]ayout[ 	]*$2[ 	]*>[ 	]*//;1t" \
+      -e "1,/[ 	]*<[lL]ayout[ 	]*$2[ 	]*>[ 	]*/d" \
+      -e '/[ 	]*<\/Layout>[ 	]*/,$d' \
+      -e "s/^[ 	]*//g" \
+      -e "s/:[ 	]*/=\'/g" \
+      -e "s/[ 	]*$/'/g" \
+      $1 > $pldconf
+  layout_name=$2
+  if test ! -s $pldconf; then
+    echo "** Error: unable to find layout $layout_name"
+    exit 1
+  fi
+  . $pldconf
+  rm $pldconf
+  for var in prefix exec_prefix bindir sbindir libexecdir mandir \
+             sysconfdir datadir includedir localstatedir runtimedir \
+             logfiledir libdir installbuilddir libsuffix $3; do
+    eval "val=\"\$$var\""
+    case $val in
+      *+)
+        val=`echo $val | sed -e 's;\+$;;'`
+        eval "$var=\"\$val\""
+        autosuffix=yes
+        ;;
+      *)
+        autosuffix=no
+        ;;
+    esac
+    val=`echo $val | sed -e 's:\(.\)/*$:\1:'`
+    val=`echo $val | sed -e 's:[\$]\([a-z_]*\):${\1}:g'`
+    if test "$autosuffix" = "yes"; then
+      if echo $val | grep apache >/dev/null; then
+        addtarget=no
+      else
+        addtarget=yes
+      fi
+      if test "$addtarget" = "yes"; then
+        val="$val/apache2"
+      fi
+    fi
+    eval "$var='$val'"
+  done
+  changequote([,])
+])dnl
+
+dnl
+dnl APR_ENABLE_LAYOUT(default layout name [, extra vars])
+dnl
+AC_DEFUN([APR_ENABLE_LAYOUT], [
+AC_ARG_ENABLE(layout,
+[  --enable-layout=LAYOUT],[
+  LAYOUT=$enableval
+])
+
+if test -z "$LAYOUT"; then
+  LAYOUT="$1"
+fi
+APR_LAYOUT($srcdir/config.layout, $LAYOUT, $2)
+
+AC_MSG_CHECKING(for chosen layout)
+AC_MSG_RESULT($layout_name)
+])
+
+
+dnl
+dnl APR_PARSE_ARGUMENTS
+dnl a reimplementation of autoconf's argument parser,
+dnl used here to allow us to co-exist layouts and argument based
+dnl set ups.
+AC_DEFUN([APR_PARSE_ARGUMENTS], [
+ac_prev=
+# Retrieve the command-line arguments.  The eval is needed because
+# the arguments are quoted to preserve accuracy.
+eval "set x $ac_configure_args"
+shift
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  ac_optarg=`expr "x$ac_option" : 'x[[^=]]*=\(.*\)'`
+
+  case $ac_option in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  esac
+done
+
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+  eval ac_val=$`echo $ac_var`
+  case $ac_val in
+    [[\\/$]]* | ?:[[\\/]]* | NONE | '' ) ;;
+    *)  AC_MSG_ERROR([expected an absolute path for --$ac_var: $ac_val]);;
+  esac
+done
+
+])dnl
+
+dnl
+dnl APR_CHECK_DEPEND
+dnl
+dnl Determine what program we can use to generate .deps-style dependencies
+dnl
+AC_DEFUN([APR_CHECK_DEPEND], [
+dnl Try to determine what depend program we can use
+dnl All GCC-variants should have -MM.
+dnl If not, then we can check on those, too.
+if test "$GCC" = "yes"; then
+  MKDEP='$(CC) -MM'
+else
+  rm -f conftest.c
+dnl <sys/types.h> should be available everywhere!
+  cat > conftest.c <<EOF
+#include <sys/types.h>
+  int main() { return 0; }
+EOF
+  MKDEP="true"
+  for i in "$CC -MM" "$CC -M" "$CPP -MM" "$CPP -M" "cpp -M"; do
+    AC_MSG_CHECKING([if $i can create proper make dependencies])
+    if $i conftest.c 2>/dev/null | grep 'conftest.o: conftest.c' >/dev/null; then
+      MKDEP=$i
+      AC_MSG_RESULT(yes)
+      break;
+    fi
+    AC_MSG_RESULT(no)
+  done
+  rm -f conftest.c
+fi
+
+AC_SUBST(MKDEP)
+])
+
+dnl
+dnl APR_CHECK_TYPES_COMPATIBLE(TYPE-1, TYPE-2, [ACTION-IF-TRUE])
+dnl
+dnl Try to determine whether two types are the same. Only works
+dnl for gcc and icc.
+dnl
+AC_DEFUN([APR_CHECK_TYPES_COMPATIBLE], [
+define([apr_cvname], apr_cv_typematch_[]translit([$1], [ ], [_])_[]translit([$2], [ ], [_]))
+AC_CACHE_CHECK([whether $1 and $2 are the same], apr_cvname, [
+AC_TRY_COMPILE(AC_INCLUDES_DEFAULT, [
+    int foo[0 - !__builtin_types_compatible_p($1, $2)];
+], [apr_cvname=yes
+$3], [apr_cvname=no])])
+])
diff --git a/build/find_apr.m4 b/build/find_apr.m4
new file mode 100644
index 0000000000..925e523f81
--- /dev/null
+++ b/build/find_apr.m4
@@ -0,0 +1,202 @@
+dnl -------------------------------------------------------- -*- autoconf -*-
+dnl Licensed to the Apache Software Foundation (ASF) under one or more
+dnl contributor license agreements.  See the NOTICE file distributed with
+dnl this work for additional information regarding copyright ownership.
+dnl The ASF licenses this file to You under the Apache License, Version 2.0
+dnl (the "License"); you may not use this file except in compliance with
+dnl the License.  You may obtain a copy of the License at
+dnl
+dnl     http://www.apache.org/licenses/LICENSE-2.0
+dnl
+dnl Unless required by applicable law or agreed to in writing, software
+dnl distributed under the License is distributed on an "AS IS" BASIS,
+dnl WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+dnl See the License for the specific language governing permissions and
+dnl limitations under the License.
+
+dnl
+dnl find_apr.m4 : locate the APR include files and libraries
+dnl
+dnl This macro file can be used by applications to find and use the APR
+dnl library. It provides a standardized mechanism for using APR. It supports
+dnl embedding APR into the application source, or locating an installed
+dnl copy of APR.
+dnl
+dnl APR_FIND_APR(srcdir, builddir, implicit-install-check, acceptable-majors,
+dnl              detailed-check)
+dnl
+dnl   where srcdir is the location of the bundled APR source directory, or
+dnl   empty if source is not bundled.
+dnl
+dnl   where builddir is the location where the bundled APR will will be built,
+dnl   or empty if the build will occur in the srcdir.
+dnl
+dnl   where implicit-install-check set to 1 indicates if there is no
+dnl   --with-apr option specified, we will look for installed copies.
+dnl
+dnl   where acceptable-majors is a space separated list of acceptable major
+dnl   version numbers. Often only a single major version will be acceptable.
+dnl   If multiple versions are specified, and --with-apr=PREFIX or the
+dnl   implicit installed search are used, then the first (leftmost) version
+dnl   in the list that is found will be used.  Currently defaults to [0 1].
+dnl
+dnl   where detailed-check is an M4 macro which sets the apr_acceptable to
+dnl   either "yes" or "no". The macro will be invoked for each installed
+dnl   copy of APR found, with the apr_config variable set appropriately.
+dnl   Only installed copies of APR which are considered acceptable by
+dnl   this macro will be considered found. If no installed copies are
+dnl   considered acceptable by this macro, apr_found will be set to either
+dnl   either "no" or "reconfig".
+dnl
+dnl Sets the following variables on exit:
+dnl
+dnl   apr_found : "yes", "no", "reconfig"
+dnl
+dnl   apr_config : If the apr-config tool exists, this refers to it. If
+dnl                apr_found is "reconfig", then the bundled directory
+dnl                should be reconfigured *before* using apr_config.
+dnl
+dnl Note: this macro file assumes that apr-config has been installed; it
+dnl       is normally considered a required part of an APR installation.
+dnl
+dnl If a bundled source directory is available and needs to be (re)configured,
+dnl then apr_found is set to "reconfig". The caller should reconfigure the
+dnl (passed-in) source directory, placing the result in the build directory,
+dnl as appropriate.
+dnl
+dnl If apr_found is "yes" or "reconfig", then the caller should use the
+dnl value of apr_config to fetch any necessary build/link information.
+dnl
+
+AC_DEFUN([APR_FIND_APR], [
+  apr_found="no"
+
+  if test "$target_os" = "os2-emx"; then
+    # Scripts don't pass test -x on OS/2
+    TEST_X="test -f"
+  else
+    TEST_X="test -x"
+  fi
+
+  ifelse([$4], [], [
+         ifdef(AC_WARNING,AC_WARNING([$0: missing argument 4 (acceptable-majors): Defaulting to APR 0.x then APR 1.x]))
+         acceptable_majors="0 1"],
+         [acceptable_majors="$4"])
+
+  apr_temp_acceptable_apr_config=""
+  for apr_temp_major in $acceptable_majors
+  do
+    case $apr_temp_major in
+      0)
+      apr_temp_acceptable_apr_config="$apr_temp_acceptable_apr_config apr-config"
+      ;;
+      *)
+      apr_temp_acceptable_apr_config="$apr_temp_acceptable_apr_config apr-$apr_temp_major-config"
+      ;;
+    esac
+  done
+
+  AC_MSG_CHECKING(for APR)
+  AC_ARG_WITH(apr,
+  [  --with-apr=PATH         prefix for installed APR or the full path to 
+                             apr-config],
+  [
+    if test "$withval" = "no" || test "$withval" = "yes"; then
+      AC_MSG_ERROR([--with-apr requires a directory or file to be provided])
+    fi
+
+    for apr_temp_apr_config_file in $apr_temp_acceptable_apr_config
+    do
+      for lookdir in "$withval/bin" "$withval"
+      do
+        if $TEST_X "$lookdir/$apr_temp_apr_config_file"; then
+          apr_config="$lookdir/$apr_temp_apr_config_file"
+          ifelse([$5], [], [], [
+          apr_acceptable="yes"
+          $5
+          if test "$apr_acceptable" != "yes"; then
+            AC_MSG_WARN([Found APR in $apr_config, but we think it is considered unacceptable])
+            continue
+          fi])
+          apr_found="yes"
+          break 2
+        fi
+      done
+    done
+
+    if test "$apr_found" != "yes" && $TEST_X "$withval" && $withval --help > /dev/null 2>&1 ; then
+      apr_config="$withval"
+      ifelse([$5], [], [apr_found="yes"], [
+          apr_acceptable="yes"
+          $5
+          if test "$apr_acceptable" = "yes"; then
+                apr_found="yes"
+          fi])
+    fi
+
+    dnl if --with-apr is used, it is a fatal error for its argument
+    dnl to be invalid
+    if test "$apr_found" != "yes"; then
+      AC_MSG_ERROR([the --with-apr parameter is incorrect. It must specify an install prefix, a build directory, or an apr-config file.])
+    fi
+  ],[
+    dnl If we allow installed copies, check those before using bundled copy.
+    if test -n "$3" && test "$3" = "1"; then
+      for apr_temp_apr_config_file in $apr_temp_acceptable_apr_config
+      do
+        if $apr_temp_apr_config_file --help > /dev/null 2>&1 ; then
+          apr_config="$apr_temp_apr_config_file"
+          ifelse([$5], [], [], [
+          apr_acceptable="yes"
+          $5
+          if test "$apr_acceptable" != "yes"; then
+            AC_MSG_WARN([skipped APR at $apr_config, version not acceptable])
+            continue
+          fi])
+          apr_found="yes"
+          break
+        else
+          dnl look in some standard places
+          for lookdir in /usr /usr/local /usr/local/apr /opt/apr; do
+            if $TEST_X "$lookdir/bin/$apr_temp_apr_config_file"; then
+              apr_config="$lookdir/bin/$apr_temp_apr_config_file"
+              ifelse([$5], [], [], [
+              apr_acceptable="yes"
+              $5
+              if test "$apr_acceptable" != "yes"; then
+                AC_MSG_WARN([skipped APR at $apr_config, version not acceptable])
+                continue
+              fi])
+              apr_found="yes"
+              break 2
+            fi
+          done
+        fi
+      done
+    fi
+    dnl if we have not found anything yet and have bundled source, use that
+    if test "$apr_found" = "no" && test -d "$1"; then
+      apr_temp_abs_srcdir="`cd \"$1\" && pwd`"
+      apr_found="reconfig"
+      apr_bundled_major="`sed -n '/#define.*APR_MAJOR_VERSION/s/^[^0-9]*\([0-9]*\).*$/\1/p' \"$1/include/apr_version.h\"`"
+      case $apr_bundled_major in
+        "")
+          AC_MSG_ERROR([failed to find major version of bundled APR])
+        ;;
+        0)
+          apr_temp_apr_config_file="apr-config"
+        ;;
+        *)
+          apr_temp_apr_config_file="apr-$apr_bundled_major-config"
+        ;;
+      esac
+      if test -n "$2"; then
+        apr_config="$2/$apr_temp_apr_config_file"
+      else
+        apr_config="$1/$apr_temp_apr_config_file"
+      fi
+    fi
+  ])
+
+  AC_MSG_RESULT($apr_found)
+])
diff --git a/build/find_apu.m4 b/build/find_apu.m4
new file mode 100644
index 0000000000..7937e005a7
--- /dev/null
+++ b/build/find_apu.m4
@@ -0,0 +1,211 @@
+dnl -------------------------------------------------------- -*- autoconf -*-
+dnl Licensed to the Apache Software Foundation (ASF) under one or more
+dnl contributor license agreements.  See the NOTICE file distributed with
+dnl this work for additional information regarding copyright ownership.
+dnl The ASF licenses this file to You under the Apache License, Version 2.0
+dnl (the "License"); you may not use this file except in compliance with
+dnl the License.  You may obtain a copy of the License at
+dnl
+dnl     http://www.apache.org/licenses/LICENSE-2.0
+dnl
+dnl Unless required by applicable law or agreed to in writing, software
+dnl distributed under the License is distributed on an "AS IS" BASIS,
+dnl WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+dnl See the License for the specific language governing permissions and
+dnl limitations under the License.
+
+dnl
+dnl find_apu.m4 : locate the APR-util (APU) include files and libraries
+dnl
+dnl This macro file can be used by applications to find and use the APU
+dnl library. It provides a standardized mechanism for using APU. It supports
+dnl embedding APU into the application source, or locating an installed
+dnl copy of APU.
+dnl
+dnl APR_FIND_APU(srcdir, builddir, implicit-install-check, acceptable-majors,
+dnl              detailed-check)
+dnl
+dnl   where srcdir is the location of the bundled APU source directory, or
+dnl   empty if source is not bundled.
+dnl
+dnl   where builddir is the location where the bundled APU will be built,
+dnl   or empty if the build will occur in the srcdir.
+dnl
+dnl   where implicit-install-check set to 1 indicates if there is no
+dnl   --with-apr-util option specified, we will look for installed copies.
+dnl
+dnl   where acceptable-majors is a space separated list of acceptable major
+dnl   version numbers. Often only a single major version will be acceptable.
+dnl   If multiple versions are specified, and --with-apr-util=PREFIX or the
+dnl   implicit installed search are used, then the first (leftmost) version
+dnl   in the list that is found will be used.  Currently defaults to [0 1].
+dnl
+dnl   where detailed-check is an M4 macro which sets the apu_acceptable to
+dnl   either "yes" or "no". The macro will be invoked for each installed
+dnl   copy of APU found, with the apu_config variable set appropriately.
+dnl   Only installed copies of APU which are considered acceptable by
+dnl   this macro will be considered found. If no installed copies are
+dnl   considered acceptable by this macro, apu_found will be set to either
+dnl   either "no" or "reconfig".
+dnl
+dnl Sets the following variables on exit:
+dnl
+dnl   apu_found : "yes", "no", "reconfig"
+dnl
+dnl   apu_config : If the apu-config tool exists, this refers to it.  If
+dnl                apu_found is "reconfig", then the bundled directory
+dnl                should be reconfigured *before* using apu_config.
+dnl
+dnl Note: this macro file assumes that apr-config has been installed; it
+dnl       is normally considered a required part of an APR installation.
+dnl
+dnl Note: At this time, we cannot find *both* a source dir and a build dir.
+dnl       If both are available, the build directory should be passed to
+dnl       the --with-apr-util switch.
+dnl
+dnl Note: the installation layout is presumed to follow the standard
+dnl       PREFIX/lib and PREFIX/include pattern. If the APU config file
+dnl       is available (and can be found), then non-standard layouts are
+dnl       possible, since it will be described in the config file.
+dnl
+dnl If a bundled source directory is available and needs to be (re)configured,
+dnl then apu_found is set to "reconfig". The caller should reconfigure the
+dnl (passed-in) source directory, placing the result in the build directory,
+dnl as appropriate.
+dnl
+dnl If apu_found is "yes" or "reconfig", then the caller should use the
+dnl value of apu_config to fetch any necessary build/link information.
+dnl
+
+AC_DEFUN([APR_FIND_APU], [
+  apu_found="no"
+
+  if test "$target_os" = "os2-emx"; then
+    # Scripts don't pass test -x on OS/2
+    TEST_X="test -f"
+  else
+    TEST_X="test -x"
+  fi
+
+  ifelse([$4], [],
+  [
+    ifdef(AC_WARNING,([$0: missing argument 4 (acceptable-majors): Defaulting to APU 0.x then APU 1.x]))
+    acceptable_majors="0 1"
+  ], [acceptable_majors="$4"])
+
+  apu_temp_acceptable_apu_config=""
+  for apu_temp_major in $acceptable_majors
+  do
+    case $apu_temp_major in
+      0)
+      apu_temp_acceptable_apu_config="$apu_temp_acceptable_apu_config apu-config"
+      ;;
+      *)
+      apu_temp_acceptable_apu_config="$apu_temp_acceptable_apu_config apu-$apu_temp_major-config"
+      ;;
+    esac
+  done
+
+  AC_MSG_CHECKING(for APR-util)
+  AC_ARG_WITH(apr-util,
+  [  --with-apr-util=PATH    prefix for installed APU or the full path to 
+                             apu-config],
+  [
+    if test "$withval" = "no" || test "$withval" = "yes"; then
+      AC_MSG_ERROR([--with-apr-util requires a directory or file to be provided])
+    fi
+
+    for apu_temp_apu_config_file in $apu_temp_acceptable_apu_config
+    do
+      for lookdir in "$withval/bin" "$withval"
+      do
+        if $TEST_X "$lookdir/$apu_temp_apu_config_file"; then
+          apu_config="$lookdir/$apu_temp_apu_config_file"
+          ifelse([$5], [], [], [
+          apu_acceptable="yes"
+          $5
+          if test "$apu_acceptable" != "yes"; then
+            AC_MSG_WARN([Found APU in $apu_config, but it is considered unacceptable])
+            continue
+          fi])
+          apu_found="yes"
+          break 2
+        fi
+      done
+    done
+
+    if test "$apu_found" != "yes" && $TEST_X "$withval" && $withval --help > /dev/null 2>&1 ; then
+      apu_config="$withval"
+      ifelse([$5], [], [apu_found="yes"], [
+          apu_acceptable="yes"
+          $5
+          if test "$apu_acceptable" = "yes"; then
+                apu_found="yes"
+          fi])
+    fi
+
+    dnl if --with-apr-util is used, it is a fatal error for its argument
+    dnl to be invalid
+    if test "$apu_found" != "yes"; then
+      AC_MSG_ERROR([the --with-apr-util parameter is incorrect. It must specify an install prefix, a build directory, or an apu-config file.])
+    fi
+  ],[
+    if test -n "$3" && test "$3" = "1"; then
+      for apu_temp_apu_config_file in $apu_temp_acceptable_apu_config
+      do
+        if $apu_temp_apu_config_file --help > /dev/null 2>&1 ; then
+          apu_config="$apu_temp_apu_config_file" 
+          ifelse([$5], [], [], [
+          apu_acceptable="yes"
+          $5
+          if test "$apu_acceptable" != "yes"; then
+            AC_MSG_WARN([skipped APR-util at $apu_config, version not acceptable])
+            continue
+          fi])
+          apu_found="yes"
+          break
+        else
+          dnl look in some standard places (apparently not in builtin/default)
+          for lookdir in /usr /usr/local /usr/local/apr /opt/apr; do
+            if $TEST_X "$lookdir/bin/$apu_temp_apu_config_file"; then
+              apu_config="$lookdir/bin/$apu_temp_apu_config_file"
+              ifelse([$5], [], [], [
+              apu_acceptable="yes"
+              $5
+              if test "$apu_acceptable" != "yes"; then
+                AC_MSG_WARN([skipped APR-util at $apu_config, version not acceptable])
+                continue
+              fi])
+              apu_found="yes"
+              break 2
+            fi
+          done
+        fi
+      done
+    fi
+    dnl if we have not found anything yet and have bundled source, use that
+    if test "$apu_found" = "no" && test -d "$1"; then
+      apu_temp_abs_srcdir="`cd \"$1\" && pwd`"
+      apu_found="reconfig"
+      apu_bundled_major="`sed -n '/#define.*APU_MAJOR_VERSION/s/^[^0-9]*\([0-9]*\).*$/\1/p' \"$1/include/apu_version.h\"`"
+      case $apu_bundled_major in
+        "")
+          AC_MSG_ERROR([failed to find major version of bundled APU])
+        ;;
+        0)
+          apu_temp_apu_config_file="apu-config"
+        ;;
+        *)
+          apu_temp_apu_config_file="apu-$apu_bundled_major-config"
+        ;;
+      esac
+      if test -n "$2"; then
+        apu_config="$2/$apu_temp_apu_config_file"
+      else
+        apu_config="$1/$apu_temp_apu_config_file"
+      fi
+    fi
+  ])
+
+  AC_MSG_RESULT($apu_found)
+])