| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
| |
This is vestigal. It has been in place, because we'd be turning off echo
ourselves when asking for password and needed to make sure we'd still
terminal in original state upon unexpected termination.
This shouldn't be necessary since commit 9d95e1f1753a ('clients/cli: use a
nicer password prompt') we let readline take care of this and also clean
up after itself in nmc_cleanup_readline().
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
nm_l3_config_data_get_nameservers() returns a pointer to "struct in6_addr". Not
a pointer to pointers.
#0 __memmove_avx_unaligned_erms () at ../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:389
#1 0x00007f8060dd9109 in memcpy (__len=<optimized out>, __src=0xfd, __dest=<optimized out>) at /usr/include/bits/string_fortified.h:29
#2 g_array_append_vals (len=1, data=0xfd, farray=0x55dd69332130) at ../glib/garray.c:522
#3 g_array_append_vals (farray=0x55dd69332130, data=0xfd, len=1) at ../glib/garray.c:509
#4 0x000055dd68d2a27d in _garray_inaddr_add (p_arr=<optimized out>, addr_family=<optimized out>, addr=0xfd) at src/core/nm-l3-config-data.c:295
#5 0x000055dd68ef6510 in nm_l3_config_data_add_nameserver (nameserver=<optimized out>, addr_family=10, self=0x55dd6949f900) at src/core/nm-l3-config-data.c:1442
#6 nm_device_copy_ip6_dns_config (self=0x55dd693c4420, from_device=<optimized out>) at src/core/devices/nm-device.c:10468
#7 0x00007f8060f28aba in _g_closure_invoke_va (param_types=0x0, n_params=<optimized out>, args=0x7fffed43d610, instance=0x55dd693c4420, return_value=0x0, closure=0x55dd693cdb10)
at ../gobject/gclosure.c:893
#8 g_signal_emit_valist (instance=0x55dd693c4420, signal_id=<optimized out>, detail=0, var_args=var_args@entry=0x7fffed43d610) at ../gobject/gsignal.c:3406
#9 0x00007f8060f28c03 in g_signal_emit (instance=<optimized out>, signal_id=<optimized out>, detail=<optimized out>) at ../gobject/gsignal.c:3553
#10 0x000055dd68efd1fb in _dev_ipac6_start (self=0x55dd693c4420) at src/core/devices/nm-device.c:11348
#11 0x000055dd68efd698 in _dev_ipac6_start_continue (self=0x55dd693c4420) at src/core/devices/nm-device.c:11373
#12 _dev_ipll6_set_llstate (self=0x55dd693c4420, llstate=<optimized out>, lladdr=<optimized out>) at src/core/devices/nm-device.c:10576
#13 0x000055dd68e7915e in _emit_changed_on_idle_cb (user_data=user_data@entry=0x55dd6941ca50) at src/core/nm-l3-ipv6ll.c:221
#14 0x00007f8060e0639b in g_idle_dispatch (source=0x55dd693eea30, callback=0x55dd68e78fd0 <_emit_changed_on_idle_cb>, user_data=0x55dd6941ca50) at ../glib/gmain.c:5897
#15 0x00007f8060e0a05f in g_main_dispatch (context=0x55dd6922c800) at ../glib/gmain.c:3381
#16 g_main_context_dispatch (context=0x55dd6922c800) at ../glib/gmain.c:4099
#17 0x00007f8060e5f2a8 in g_main_context_iterate.constprop.0 (context=0x55dd6922c800, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at ../glib/gmain.c:4175
#18 0x00007f8060e09773 in g_main_loop_run (loop=0x55dd69211010) at ../glib/gmain.c:4373
#19 0x000055dd68d09c7b in main (argc=<optimized out>, argv=<optimized out>) at src/core/main.c:509
Fixes: 58287cbcc0c8 ('core: rework IP configuration in NetworkManager using layer 3 configuration')
|
|\
| |
| |
| |
| |
| | |
https://bugzilla.redhat.com/show_bug.cgi?id=1837254
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1093
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add support for IPv6 multipath routes, by treating them as single-hop
routes. Otherwise, we can easily end up with an inconsistent platform
cache.
Background:
-----------
Routes are hard. We have NMPlatform which is a cache of netlink objects.
That means, we have a hash table and we cache objects based on some
identity (nmp_object_id_equal()). So those objects must have some immutable,
indistinguishable properties that determine whether an object is the
same or a different one.
For routes and routing rules, this identifying property is basically a subset
of the attributes (but not all!). That makes it very hard, because tomorrow
kernel could add an attribute that becomes part of the identity, and NetworkManager
wouldn't recognize it, resulting in cache inconsistency by wrongly
thinking two different routes are one and the same. Anyway.
The other point is that we rely on netlink events to maintain the cache.
So when we receive a RTM_NEWROUTE we add the object to the cache, and
delete it upon RTM_DELROUTE. When you do `ip route replace`, kernel
might replace a (different!) route, but only send one RTM_NEWROUTE message.
We handle that by somehow finding the route that was replaced/deleted. It's
ugly. Did I say, that routes are hard?
Also, for IPv4 routes, multipath attributes are just a part of the
routes identity. That is, you add two different routes that only differ
by their multipath list, and then kernel does as you would expect.
NetworkManager does not support IPv4 multihop routes and just ignores
them.
Also, a multipath route can have next hops on different interfaces,
which goes against our current assumption, that an NMPlatformIP4Route
has an interface (or no interface, in case of blackhole routes). That
makes it hard to meaningfully support IPv4 routes. But we probably don't
have to, because we can just pretend that such routes don't exist and
our cache stays consistent (at least, until somebody calls `ip route
replace` *sigh*).
Not so for IPv6. When you add (`ip route append`) an IPv6 route that is
identical to an existing route -- except their multipath attribute -- then it
behaves as if the existing route was modified and the result is the
merged route with more next-hops. Note that in this case kernel will
only send a RTM_NEWROUTE message with the full multipath list. If we
would treat the multipath list as part of the route's identity, this
would be as if kernel deleted one routes and created a different one (the
merged one), but only sending one notification. That's a bit similar to
what happens during `ip route replace`, but it would be nightmare to
find out which route was thereby replaced.
Likewise, when you delete a route, then kernel will "subtract" the
next-hop and sent a RTM_DELROUTE notification only about the next-hop that
was deleted. To handle that, you would have to find the full multihop
route, and replace it with the remainder after the subtraction.
NetworkManager so far ignored IPv6 routes with more than one next-hop, this
means you can start with one single-hop route (that NetworkManger sees
and has in the platform cache). Then you create a similar route (only
differing by the next-hop). Kernel will merge the routes, but not notify
NetworkManager that the single-hop route is not longer a single-hop
route. This can easily cause a cache inconsistency and subtle bugs. For
IPv6 we MUST handle multihop routes.
Kernels behavior makes little sense, if you expect that routes have an
immutable identity and want to get notifications about addition/removal.
We can however make sense by it by pretending that all IPv6 routes are
single-hop! With only the twist that a single RTM_NEWROUTE notification
might notify about multiple routes at the same time. This is what the
patch does.
The Patch
---------
Now one RTM_NEWROUTE message can contain multiple IPv6 routes
(NMPObject). That would mean that nmp_object_new_from_nl() needs to
return a list of objects. But it's not implemented that way. Instead,
we still call nmp_object_new_from_nl(), and the parsing code can
indicate that there is something more, indicating the caller to call
nmp_object_new_from_nl() again in a loop to fetch more objects.
In practice, I think all RTM_DELROUTE messages for IPv6 routes are
single-hop. Still, we implement it to handle also multi-hop messages the
same way.
Note that we just parse the netlink message again from scratch. The alternative
would be to parse the first object once, and then clone the object and
only update the next-hop. That would be more efficient, but probably
harder to understand/implement.
https://bugzilla.redhat.com/show_bug.cgi?id=1837254#c20
|
|/
|
|
|
|
|
|
|
|
|
| |
To parse the RTA_MULTIHOP message, "policy" is not right (which is used
to parse the overall message). Instead, we don't really have a special
policy that we should use.
This was not a severe issue, because the allocated buffer (with
G_N_ELEMENTS(policy) elements) was larger than need be. And apparently,
using the wrong policy also didn't cause us to reject important
messages.
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is actually not translation output from this at the moment
This, while is not generally a problem is triggering an issue with
gettext, see https://lists.gnu.org/archive/html/bug-gettext/2019-05/msg00125.html
While the fix is already in gettext upstream, I think is ok to remove
this translation file for now as it doesn't produce any valid
translation at the moment anyway
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1094#note_1258564
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CentOS 8 Linux is end of life. That wouldn't bother us, but when
you start such a container
$ podman run -ti --privileged quay.io/centos/centos:8.3.2011
then `dnf upgrade` will fail, because the mirror list returns
nothing. To work around that, we need to adjust ci-templates ([1]).
The work around might be to patch /etc/yum.repos.d when creating
the container image ([2]).
For now (or maybe indefinitely) disable these build targets.
[1] https://gitlab.freedesktop.org/freedesktop/ci-templates/-/merge_requests/131
[2] https://stackoverflow.com/questions/70926799/centos-through-vm-no-urls-in-mirrorlist
|
| |
|
|
|
|
|
| |
Recent python-black (22.0) dropped support for Python 2 and thus fail
for those files. Make the examples Python3 compatible.
|
|
|
|
| |
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1096
|
|\
| |
| | |
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1088
|
| |
| |
| |
| | |
https://bugzilla.redhat.com/show_bug.cgi?id=2022623
|
|/ |
|
|\
| |
| |
| | |
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1082
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Make use of direct strv property in some cases. It doesn't work for
other cases yet, because they are implemented differently, and porting
them is more effort and needs to be done one by one.
The goal is to have a unified, standard implementation for our
properties. One that requires a minimal amount of property-specific
code. For strv properties, that is a bit more cumbersome, because
usually there are multiple C accessor functions. Still, make an effort
to have a "direct" strv property.
What this also gives, is that we no longer need to clone the strv array
for various operations. We know how to access the data, and can do it
directly without g_object_get()/g_object_set().
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
G_TYPE_STRV is the last property type in NMSetting that is implemented
by directly accessing the GObect property. Note that we have lots of
override, non-default implementations that still use GObject properties,
but I am talking here about properties that don't have a special
implementation and use a G_TYPE_STRV GObject property.
Add a "direct" implementation also for strv arrays.
The advantage is that we no longer call g_value_get() for various
operations, which requires a deep-copy of the strv array. The other
advantage is that we will get a unified approach for implementing strv
properties. In particular strv arrays need a lot of code to implement,
and most settings do it differently. By adding a general mechanism,
this code (and behavior) can be unified.
Showcase it on "match.interface-name".
|
|/ |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
test_machine_id_read() is a flawed unit test, as it reads the machine-id
of the machine where it's running. That means the test depends on the
test machine, which is obviously a problem.
If you had no /etc/machine-id but a /var/lib/dbus/machine-id, then previously
the test would fail. If the file exists, assume we are able to read a
valid machine-id.
On test systems that have a bogus /etc/machine-id or /var/lib/dbus/machine-id,
the test would still fail. Just don't do that.
|
| |
|
| |
|
|
|
|
|
|
| |
https://bugzilla.redhat.com/show_bug.cgi?id=2028751
Fixes: db0d84f13a (“l3cfg: fix handling "instance-reset" ACD event”)
|
|\
| |
| |
| |
| |
| |
| | |
https://bugzilla.redhat.com/show_bug.cgi?id=1937823
https://bugzilla.redhat.com/show_bug.cgi?id=2013587
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1083
|
| | |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
IPv4:
routes
A list of IPv4 destination addresses, prefix length, optional IPv4
next hop addresses, optional route metric, optional attribute. The
valid syntax is: "ip[/prefix] [next-hop] [metric]
[attribute=val]...[,ip[/prefix]...]". For example "192.0.2.0/24
10.1.1.1 77, 198.51.100.0/24".
Various attributes are supported:
• "cwnd" - an unsigned 32 bit integer.
• "initcwnd" - an unsigned 32 bit integer.
• "initrwnd" - an unsigned 32 bit integer.
• "lock-cwnd" - a boolean value.
• "lock-initcwnd" - a boolean value.
• "lock-initrwnd" - a boolean value.
• "lock-mtu" - a boolean value.
• "lock-window" - a boolean value.
• "mtu" - an unsigned 32 bit integer.
• "onlink" - a boolean value.
• "scope" - an unsigned 8 bit integer. IPv4 only.
• "src" - an IPv4 address.
• "table" - an unsigned 32 bit integer. The default depends on
ipv4.route-table.
• "tos" - an unsigned 8 bit integer. IPv4 only.
• "type" - one of unicast, local, blackhole, unavailable,
prohibit. The default is unicast.
• "window" - an unsigned 32 bit integer.
For details see also `man ip-route`.
Format: a comma separated list of routes
IPv6:
routes
A list of IPv6 destination addresses, prefix length, optional IPv6
next hop addresses, optional route metric, optional attribute. The
valid syntax is: "ip[/prefix] [next-hop] [metric]
[attribute=val]...[,ip[/prefix]...]".
Various attributes are supported:
• "cwnd" - an unsigned 32 bit integer.
• "from" - an IPv6 address with optional prefix. IPv6 only.
• "initcwnd" - an unsigned 32 bit integer.
• "initrwnd" - an unsigned 32 bit integer.
• "lock-cwnd" - a boolean value.
• "lock-initcwnd" - a boolean value.
• "lock-initrwnd" - a boolean value.
• "lock-mtu" - a boolean value.
• "lock-window" - a boolean value.
• "mtu" - an unsigned 32 bit integer.
• "onlink" - a boolean value.
• "src" - an IPv6 address.
• "table" - an unsigned 32 bit integer. The default depends on
ipv6.route-table.
• "type" - one of unicast, local, blackhole, unavailable,
prohibit. The default is unicast.
• "window" - an unsigned 32 bit integer.
For details see also `man ip-route`.
Format: a comma separated list of routes
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
I don't understand the code, but it mangles the XML.
There is no difference in the markup we have so far. But if you
have nested XML (like for description-docbook tag) there are cases
where this is wrong.
There is also no need to prettify anything. If you want pretty-formatted
XML, do it yourself, for example with
$ tidy --indent yes --indent-spaces 4 --indent-attributes yes --wrap-attributes yes --input-xml yes --output-xml yes src/libnm-client-impl/nm-property-infos-nmcli.xml
I think this was initially done, because we had the tool in perl, and
when migrating, we wanted to generate the exactly same output. And it
was the same output, and it was fine for the input we have. But with
different input, it's wrong. Drop it now.
|
| |
| |
| |
| |
| | |
Yes, they get cached by the library already. Still, no need for
doing this repeatedly.
|
| | |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Certain route types (blackhole, unreachable, prohibit) are not tied to
an interface. They are thus global and we need to track them system wide
(or better: per network namespace). That is done by NMPRouteManager.
For the routing rules, it's NMDevice itself to track/untrack the rules.
That is done for historical reasons, at the time, NML3Cfg did not exit.
Now with NML3Cfg, it seems that also NML3Cfg should be the part that
handles nodev routes. One reason is that we want to move IP
functionality out of NMDevice. So callers (NMDevice) would just add
blackhole routes to the NML3ConfigData and let NML3Cfg handle them.
Still, to handle these routes is rather different from regular routes.
Normally, NML3Cfg tracks an object state (ObjStateData) for each address/route,
and it hooks into platform signals to update the os_plobj field. Those signals
are dispatched by NMNetns and are only per-ifindex. Hence, NML3Cfg
wouldn't be notified about those nodev routes. Consequently, there
os_plobj could not be (efficiently) maintained and there is no
ObjStateData for such routes.
Instead, all that NML3Cfg does is have the routes in the NML3ConfigData and
tell NMPRouteManager about them. Seems simple enough. The only question
is when should NMPRouteManager sync? For now, we sync when the
track/untracking brings any changes and during reapply. Which is
probably fine.
|
| |
| |
| |
| |
| |
| |
| | |
Specifically, in nm_utils_ip_route_attribute_to_platform() and in
_l3_config_data_add_obj() handle such new route type. For the moment,
they cannot be stored in a valid NMSettingIPConfig, but later this will
be necessary.
|
| |
| |
| |
| |
| | |
This will be required next, when we will have also routes without a
device. Split the generation of the route list out.
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The general idea is that when we have entries tracked by the
route-manager, that we can mark them all as dirty. Then, calling the
"track" function will reset the dirty flag. Finally, there is a method
to delete all dirty entries.
As we can lookup an entry with O(1) (using dictionaries), we can
sync the list of tracked objects with O(n). We just need to track
all the ones we care about, and then delete those that were not touched
(that is, are still dirty).
Previously, we had to explicitly mark all entries as dirty. We can do
better. Just let nmp_route_manager_untrack_all() mark the survivors as
dirty right away. This way, we can save iterating the list once.
It also makes sense because the only purpose of the dirty flag is to
aid this prune mechanism with track/untrack-all. So, untrack-all can
just help out, and leave the remaining entries dirty, so that the next
track does the right thing.
|
| | |
|
| |
| |
| |
| | |
It's just more convenient.
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
We now track up to three kinds of object types in NMPRouteManager.
There is only one place, where we need to iterate over all objects of
the same type (e.g. all ipv4-routes), and that is nmp_route_manager_sync().
Previously, we only had one GHashTable with all the object, and when
iterating we had to skip over them after checking the type. That has some
overhead, but OK.
The ugliness with iterating over a GHashTable is that the order is non
deterministic. We should have a defined order in which things happen. To
achieve that, track three different CList, one for each object type.
Also, I expect that to be slightly faster, as you only have to iterate
over the list you care about.
|
| | |
|
| |
| |
| |
| |
| | |
No need for a dedicated implementation just to compare two
indirect pointers.
|
| | |
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
NM_HASH_OBFUSCATE_PTR() is some snake-oil to not log raw pointer values.
It obviously makes debugging harder.
But we don't need to generate differently obfuscated pointer values.
At least, let most users use the same obfuscation, so that the values
are comparable.
|
| | |
|
| |
| |
| |
| | |
We will not only track (routing) rules, but also routes. Rename.
|
| |
| |
| |
| |
| | |
Let's just always allocate the hash tables. We will likely need them,
and three hash tables are relatively cheap.
|
| | |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Routes of type blackhole, unreachable, prohibit don't have an
ifindex/device. They are thus in many ways similar to routing rules,
as they are global. We need a mediator to keep track which routes
to configure.
This will be very similar to what NMPRulesManager already does for
routing rules. Rename the API, so that it also can be used for routes.
Renaming the file will be done next, so that git's rename detection
doesn't get too confused.
|
| | |
|
| | |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
So far, certain NMObject types could not have an ifindex of zero. Hence,
nmp_lookup_init_object() took such an ifindex to mean lookup all objects
of that type.
Soon, we will support blackhole/unreachable/prohibit route types, which
have their ifindex set to zero. It is still useful to lookup those routes
types via nmp_lookup_init_object().
Change behaviour how to interpret the ifindex. Note that this also
affects various callers of nmp_lookup_init_object(). If somebody was
relying on the previous behavior, it would need fixing.
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
_vt_cmd_obj_is_alive_ipx_route() is called by nmp_object_is_alive().
Non-alive objects are not put into the cache.
That certainly makes sense for RTM_F_CLONED routes, because they are
generated ad-hoc during the `ip route get` request.
Checking for the ifindex is not necessary. For one, some route types
(blackhole, unreachable, prohibit) don't have an ifindex. Also, the
purpose of _vt_cmd_obj_is_alive_ipx_route() is not to validate the
object. Just don't create objects without an ifindex, if you think the
route needs an ifindex. Checking here is not useful.
We also don't check that other fields like rt_source are valid, so there
is no need to do it for the ifindex either.
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Currently, for NMPlatformIP[46]Route always has a gateway, even if it's
possibly set to 0.0.0.0/::. Not sure whether kernel has a further
distinction between no-gateway and all-zero gateway.
Anyway. For us, a gateway of 0.0.0.0/:: means the same as having no
gateway. We cannot differentiate the two (nor do we need to).
Don't print that in nm_platform_ip[46]_route_to_string().
Also, because we are going to add blackhole route types, which cannot
have a next-hop. But we do this change for all routes types, because
it makes sense in general (and also what `ip route show` prints).
|
| |
| |
| |
| | |
It's what we do at many other places. Consistency.
|