Update of dlt-daemon.1, Readme.txt, Install.txt, CMAKELists and gitignore

7 files changed, 61 insertions, 46 deletions

diff --git a/.gitignore b/.gitignore
index 4e5b679..825ca18 100644
--- a/.gitignore
+++ b/.gitignore
@@ -5,9 +5,5 @@ automotive-dlt.spec
 automotive-dlt.pc
 config.h
 include/dlt/dlt_version.h
-doc/DOC_DLT/
-doc/DOC_DLT_Filetransfer/
-doc/doxygen.cfg
-doc/filetransfer_doxygen.cfg
 
 
diff --git a/CMakeLists.txt b/CMakeLists.txt
index c9a987f..40084e1 100755
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -115,6 +115,7 @@ message( STATUS "WITH_DOC = ${WITH_DOC}" )
 message( STATUS "WITH_TESTSCRIPTS = ${WITH_TESTSCRIPTS}" )

 message( STATUS "WITH_SYSTEMD = ${WITH_SYSTEMD}" )

 message( STATUS "WITH_GPROF = ${WITH_GPROF}" )

+message( STATUS "WITH_MAN = ${WITH_MAN}" )

 message( STATUS "BUILD_SHARED_LIBS = ${BUILD_SHARED_LIBS}" )

 message( STATUS "CMAKE_INSTALL_PREFIX = ${CMAKE_INSTALL_PREFIX}" )

 message( STATUS "CMAKE_BUILD_TYPE = ${CMAKE_BUILD_TYPE}" )

diff --git a/INSTALL.txt b/INSTALL.txt
index 1ffb1e9..8f65e7c 100644
--- a/INSTALL.txt
+++ b/INSTALL.txt
@@ -1,20 +1,18 @@
 Instructions for installing this software
----
+-----------------------------------------
 
 This software uses cmake as its build tool. To build and install the
 DLT daemon, follow these steps;
 
-1. Create a build directory;
+- mkdir build
+- cd build
+- cmake ..
+- make
+- optional: sudo make install
+- optional: sudo ldconfig
 
-$ mkdir build
 
-2. Move into that directory and call cmake;
-
-$ cd build && cmake ../
-
-3. The run make and make install;
-
-$ make
-# make install
-
-Note you'll have to be root to run make install, or do 'sudo make install'.
+Please read the README.txt for
+- Compile options and default values
+- Man pages
+- Doxygen documentation
\ No newline at end of file
diff --git a/README.txt b/README.txt
index 95f12e8..d976717 100644
--- a/README.txt
+++ b/README.txt
@@ -51,25 +51,47 @@ Compiling in Linux:
 
 Compile options with default values
 -----------------------------------
--- WITH_DLT_SHM_ENABLE =       OFF
--- WITH_CHECK_CONFIG_FILE =    OFF
--- WITH_DOC =                  OFF
--- WITH_TESTSCRIPTS =          OFF
--- WITH_SYSTEMD =              OFF
--- WITH_GPROF = 			   OFF
--- BUILD_SHARED_LIBS =         ON
--- CMAKE_INSTALL_PREFIX =      /usr/local
--- CMAKE_BUILD_TYPE =          RelWithDebInfo
-
-In order to change these options, you can modify this values with ccmake, do the appropriate changes in CmakeList.txt or via 
+- WITH_DLT_SHM_ENABLE =        OFF
+- WITH_CHECK_CONFIG_FILE =     OFF
+- WITH_DOC =                   OFF
+- WITH_TESTSCRIPTS =           OFF
+- WITH_SYSTEMD =               OFF
+- WITH_GPROF =  			   OFF
+- WITH_MAN =				   ON
+- BUILD_SHARED_LIBS =          ON
+- CMAKE_INSTALL_PREFIX =       /usr/local
+- CMAKE_BUILD_TYPE =           RelWithDebInfo
+
+
+In order to change these options, you can modify this values
+with ccmake, do the appropriate changes in CmakeList.txt or via 
 the commandline for cmake
--- Change a value with: cmake -D<Variable>=<Value>
+- Change a value with: cmake -D<Variable>=<Value>
+- Example: cmake -DCMAKE_INSTALL_PREFIX=/usr
 
 
-Create documentation
---------------------
+Man pages
+---------
+With the compile option "WITH_MAN=ON" (default value) the man 
+pages will generated. After the call "sudo make install" (see 
+"Compilin in Linux") they are installed at <CMAKE_INSTALL_PREFIX>/share/man. 
+
+To get more informations, call e.g.
+- man dlt-daemon
+- man dlt.conf
+- man dlt-convert
+- man dlt-receive
+- man dlt-system
+- man dlt-system.conf
+
+
+Create doxygen documentation
+----------------------------
 - mkdir build
 - cd build
 - cmake -DWITH_DOC=ON ..
-- make doc
-- (optional)make doc-filetransfer
\ No newline at end of file
+- make 
+- (only DLT doc - optional )make doc
+- (only DLT-Filetransfer - optional )make doc-filetransfer
+
+You find the documentation know as HTML, RTF or LaTex in <project-root>/build/doc
\ No newline at end of file
diff --git a/doc/CMakeLists.txt b/doc/CMakeLists.txt
index 989f521..851e356 100755
--- a/doc/CMakeLists.txt
+++ b/doc/CMakeLists.txt
@@ -38,18 +38,19 @@
 if(WITH_DOC)
     find_package(Doxygen)
        
-    CONFIGURE_FILE(${CMAKE_SOURCE_DIR}/doc/doxygen.cfg.cmake ${CMAKE_SOURCE_DIR}/doc/doxygen.cfg @ONLY)
-    CONFIGURE_FILE(${CMAKE_SOURCE_DIR}/doc/filetransfer_doxygen.cfg.cmake ${CMAKE_SOURCE_DIR}/doc/filetransfer_doxygen.cfg @ONLY)
+    configure_file(${CMAKE_SOURCE_DIR}/doc/doxygen.cfg.cmake ${CMAKE_BINARY_DIR}/doc/doxygen.cfg @ONLY)
+    configure_file(${CMAKE_SOURCE_DIR}/doc/filetransfer_doxygen.cfg.cmake ${CMAKE_BINARY_DIR}/doc/filetransfer_doxygen.cfg @ONLY)
 	
 	add_custom_target (doc ALL 
-  		COMMAND ${DOXYGEN_EXECUTABLE} ${CMAKE_SOURCE_DIR}/doc/doxygen.cfg 
-  		WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}/doc
+  		COMMAND ${DOXYGEN_EXECUTABLE} ${CMAKE_BINARY_DIR}/doc/doxygen.cfg 
+  		WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/doc
 	)
 	
 	add_custom_target (doc-filetransfer ALL 
-  		COMMAND ${DOXYGEN_EXECUTABLE} ${CMAKE_SOURCE_DIR}/doc/filetransfer_doxygen.cfg 
-  		WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}/doc
+  		COMMAND ${DOXYGEN_EXECUTABLE} ${CMAKE_BINARY_DIR}/doc/filetransfer_doxygen.cfg 
+  		WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/doc
 	)
+
 endif(WITH_DOC)
 
 if(WITH_MAN)
diff --git a/doc/dlt-daemon.1 b/doc/dlt-daemon.1
index 7d3d375..5776745 100644
--- a/doc/dlt-daemon.1
+++ b/doc/dlt-daemon.1
@@ -3,7 +3,7 @@
 dlt-daemon \- DLT daemon for logging and tracing purpose
 .SH SYNOPSIS
 .B dlt-daemon
-[\-h] [\-d] [\-v] [\-c filename]
+[\-h] [\-d] [\-c filename]
 .SH DESCRIPTION
 The DLT daemon is the central place where logs and traces are gathered
 from different applications, stored temporarily or permanently and
@@ -20,9 +20,6 @@ Display a short help text.
 \-d
 Daemonize, needed in System V init systems.
 .TP
-\-v
-Display debug information from the running DLT daemon.
-.TP
 \-c
 Load an alternative configuration file. By default the configuration
 file /etc/dlt.conf is loaded.
@@ -33,9 +30,9 @@ Start DLT daemon in background mode:
 \-d
 .PP
 .TP
-Start DLT daemon for debugging purpose with own configuration:
+Start DLT daemon with own configuration:
 .B dlt-daemon
-\-c ~/my-dlt-configuration.cfg \-v
+\-c ~/my-dlt-configuration.cfg
 .PP
 .SH EXIT STATUS
 Non zero is returned in case of failure.
diff --git a/doc/filetransfer_doxygen.cfg.cmake b/doc/filetransfer_doxygen.cfg.cmake
index c3a091a..aa2a3b3 100755
--- a/doc/filetransfer_doxygen.cfg.cmake
+++ b/doc/filetransfer_doxygen.cfg.cmake
@@ -573,7 +573,7 @@ WARN_LOGFILE           =
 # directories like "/usr/src/myproject". Separate the files or directories
 # with spaces.
 
-INPUT = ./filetransfer_mainpage.h \
+INPUT = ./../../doc/filetransfer_mainpage.h \
 	./../src/lib/dlt_filetransfer.c \
 	./../include/dlt_filetransfer.h \
 	./../src/examples/dlt-example-filetransfer.c \