diff options
Diffstat (limited to 'swift/usr')
| -rw-r--r-- | swift/usr/lib/systemd/system/swift-storage-setup.service | 11 | ||||
| -rw-r--r-- | swift/usr/lib/systemd/system/swift-storage.service | 12 | ||||
| -rw-r--r-- | swift/usr/share/swift/etc/rsyncd.j2 | 23 | ||||
| -rw-r--r-- | swift/usr/share/swift/etc/swift/account-server.j2 | 192 | ||||
| -rw-r--r-- | swift/usr/share/swift/etc/swift/container-server.j2 | 203 | ||||
| -rw-r--r-- | swift/usr/share/swift/etc/swift/object-server.j2 | 283 | ||||
| -rw-r--r-- | swift/usr/share/swift/etc/swift/swift.j2 | 118 | ||||
| -rw-r--r-- | swift/usr/share/swift/hosts | 1 | ||||
| -rw-r--r-- | swift/usr/share/swift/swift-storage.yml | 24 |
9 files changed, 867 insertions, 0 deletions
diff --git a/swift/usr/lib/systemd/system/swift-storage-setup.service b/swift/usr/lib/systemd/system/swift-storage-setup.service new file mode 100644 index 00000000..e284fbed --- /dev/null +++ b/swift/usr/lib/systemd/system/swift-storage-setup.service @@ -0,0 +1,11 @@ +[Unit] +Description=Run openstack-swift-storage-setup (once) +After=local-fs.target postgres-server.service + +[Service] +Type=oneshot +ExecStart=/usr/bin/ansible-playbook -v -i /usr/share/swift/hosts /usr/share/swift/swift-storage.yml +Restart=no + +[Install] +WantedBy=multi-user.target diff --git a/swift/usr/lib/systemd/system/swift-storage.service b/swift/usr/lib/systemd/system/swift-storage.service new file mode 100644 index 00000000..dc41d3bc --- /dev/null +++ b/swift/usr/lib/systemd/system/swift-storage.service @@ -0,0 +1,12 @@ +[Unit] +Description=OpenStack Swift Storage +After=syslog.target network.target swift-storage-setup.service + +[Service] +Type=forking +Restart=on-failure +ExecStart=/usr/bin/swift-init all start +ExecStop=/usr/bin/swift-init all stop + +[Install] +WantedBy=multi-user.target diff --git a/swift/usr/share/swift/etc/rsyncd.j2 b/swift/usr/share/swift/etc/rsyncd.j2 new file mode 100644 index 00000000..c0657665 --- /dev/null +++ b/swift/usr/share/swift/etc/rsyncd.j2 @@ -0,0 +1,23 @@ +uid = swift +gid = swift +log file = /var/log/rsyncd.log +pid file = /var/run/rsyncd.pid +address = {{ MANAGEMENT_INTERFACE_IP_ADDRESS }} + +[account] +max connections = 2 +path = /srv/node/ +read only = false +lock file = /var/lock/account.lock + +[container] +max connections = 2 +path = /srv/node/ +read only = false +lock file = /var/lock/container.lock + +[object] +max connections = 2 +path = /srv/node/ +read only = false +lock file = /var/lock/object.lock diff --git a/swift/usr/share/swift/etc/swift/account-server.j2 b/swift/usr/share/swift/etc/swift/account-server.j2 new file mode 100644 index 00000000..d977e295 --- /dev/null +++ b/swift/usr/share/swift/etc/swift/account-server.j2 @@ -0,0 +1,192 @@ +[DEFAULT] +# bind_ip = 0.0.0.0 +bind_ip = {{ MANAGEMENT_INTERFACE_IP_ADDRESS }} +bind_port = 6002 +# bind_timeout = 30 +# backlog = 4096 +user = swift +swift_dir = /etc/swift +devices = /srv/node +# mount_check = true +# disable_fallocate = false +# +# Use an integer to override the number of pre-forked processes that will +# accept connections. +# workers = auto +# +# Maximum concurrent requests per worker +# max_clients = 1024 +# +# You can specify default log routing here if you want: +# log_name = swift +# log_facility = LOG_LOCAL0 +# log_level = INFO +# log_address = /dev/log +# The following caps the length of log lines to the value given; no limit if +# set to 0, the default. +# log_max_line_length = 0 +# +# comma separated list of functions to call to setup custom log handlers. +# functions get passed: conf, name, log_to_console, log_route, fmt, logger, +# adapted_logger +# log_custom_handlers = +# +# If set, log_udp_host will override log_address +# log_udp_host = +# log_udp_port = 514 +# +# You can enable StatsD logging here: +# log_statsd_host = localhost +# log_statsd_port = 8125 +# log_statsd_default_sample_rate = 1.0 +# log_statsd_sample_rate_factor = 1.0 +# log_statsd_metric_prefix = +# +# If you don't mind the extra disk space usage in overhead, you can turn this +# on to preallocate disk space with SQLite databases to decrease fragmentation. +# db_preallocation = off +# +# eventlet_debug = false +# +# You can set fallocate_reserve to the number of bytes you'd like fallocate to +# reserve, whether there is space for the given file size or not. +# fallocate_reserve = 0 + +[pipeline:main] +pipeline = healthcheck recon account-server + +[app:account-server] +use = egg:swift#account +# You can override the default log routing for this app here: +# set log_name = account-server +# set log_facility = LOG_LOCAL0 +# set log_level = INFO +# set log_requests = true +# set log_address = /dev/log +# +# auto_create_account_prefix = . +# +# Configure parameter for creating specific server +# To handle all verbs, including replication verbs, do not specify +# "replication_server" (this is the default). To only handle replication, +# set to a True value (e.g. "True" or "1"). To handle only non-replication +# verbs, set to "False". Unless you have a separate replication network, you +# should not specify any value for "replication_server". +# replication_server = false + +[filter:healthcheck] +use = egg:swift#healthcheck +# An optional filesystem path, which if present, will cause the healthcheck +# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE" +# disable_path = + +[filter:recon] +use = egg:swift#recon +recon_cache_path = /var/cache/swift + +[account-replicator] +# You can override the default log routing for this app here (don't use set!): +# log_name = account-replicator +# log_facility = LOG_LOCAL0 +# log_level = INFO +# log_address = /dev/log +# +# vm_test_mode = no +# per_diff = 1000 +# max_diffs = 100 +# concurrency = 8 +# interval = 30 +# +# How long without an error before a node's error count is reset. This will +# also be how long before a node is reenabled after suppression is triggered. +# error_suppression_interval = 60 +# +# How many errors can accumulate before a node is temporarily ignored. +# error_suppression_limit = 10 +# +# node_timeout = 10 +# conn_timeout = 0.5 +# +# The replicator also performs reclamation +# reclaim_age = 604800 +# +# Time in seconds to wait between replication passes +# Note: if the parameter 'interval' is defined then it will be used in place +# of run_pause. +# run_pause = 30 +# +# recon_cache_path = /var/cache/swift + +[account-auditor] +# You can override the default log routing for this app here (don't use set!): +# log_name = account-auditor +# log_facility = LOG_LOCAL0 +# log_level = INFO +# log_address = /dev/log +# +# Will audit each account at most once per interval +# interval = 1800 +# +# log_facility = LOG_LOCAL0 +# log_level = INFO +# accounts_per_second = 200 +# recon_cache_path = /var/cache/swift + +[account-reaper] +# You can override the default log routing for this app here (don't use set!): +# log_name = account-reaper +# log_facility = LOG_LOCAL0 +# log_level = INFO +# log_address = /dev/log +# +# concurrency = 25 +# interval = 3600 +# node_timeout = 10 +# conn_timeout = 0.5 +# +# Normally, the reaper begins deleting account information for deleted accounts +# immediately; you can set this to delay its work however. The value is in +# seconds; 2592000 = 30 days for example. +# delay_reaping = 0 +# +# If the account fails to be be reaped due to a persistent error, the +# account reaper will log a message such as: +# Account <name> has not been reaped since <date> +# You can search logs for this message if space is not being reclaimed +# after you delete account(s). +# Default is 2592000 seconds (30 days). This is in addition to any time +# requested by delay_reaping. +# reap_warn_after = 2592000 + +# Note: Put it at the beginning of the pipeline to profile all middleware. But +# it is safer to put this after healthcheck. +[filter:xprofile] +use = egg:swift#xprofile +# This option enable you to switch profilers which should inherit from python +# standard profiler. Currently the supported value can be 'cProfile', +# 'eventlet.green.profile' etc. +# profile_module = eventlet.green.profile +# +# This prefix will be used to combine process ID and timestamp to name the +# profile data file. Make sure the executing user has permission to write +# into this path (missing path segments will be created, if necessary). +# If you enable profiling in more than one type of daemon, you must override +# it with an unique value like: /var/log/swift/profile/account.profile +# log_filename_prefix = /tmp/log/swift/profile/default.profile +# +# the profile data will be dumped to local disk based on above naming rule +# in this interval. +# dump_interval = 5.0 +# +# Be careful, this option will enable profiler to dump data into the file with +# time stamp which means there will be lots of files piled up in the directory. +# dump_timestamp = false +# +# This is the path of the URL to access the mini web UI. +# path = /__profile__ +# +# Clear the data when the wsgi server shutdown. +# flush_at_shutdown = false +# +# unwind the iterator of applications +# unwind = false diff --git a/swift/usr/share/swift/etc/swift/container-server.j2 b/swift/usr/share/swift/etc/swift/container-server.j2 new file mode 100644 index 00000000..d226d016 --- /dev/null +++ b/swift/usr/share/swift/etc/swift/container-server.j2 @@ -0,0 +1,203 @@ +[DEFAULT] +# bind_ip = 0.0.0.0 +bind_ip = {{ MANAGEMENT_INTERFACE_IP_ADDRESS }} +bind_port = 6001 +# bind_timeout = 30 +# backlog = 4096 +user = swift +swift_dir = /etc/swift +devices = /srv/node +# mount_check = true +# disable_fallocate = false +# +# Use an integer to override the number of pre-forked processes that will +# accept connections. +# workers = auto +# +# Maximum concurrent requests per worker +# max_clients = 1024 +# +# This is a comma separated list of hosts allowed in the X-Container-Sync-To +# field for containers. This is the old-style of using container sync. It is +# strongly recommended to use the new style of a separate +# container-sync-realms.conf -- see container-sync-realms.conf-sample +# allowed_sync_hosts = 127.0.0.1 +# +# You can specify default log routing here if you want: +# log_name = swift +# log_facility = LOG_LOCAL0 +# log_level = INFO +# log_address = /dev/log +# The following caps the length of log lines to the value given; no limit if +# set to 0, the default. +# log_max_line_length = 0 +# +# comma separated list of functions to call to setup custom log handlers. +# functions get passed: conf, name, log_to_console, log_route, fmt, logger, +# adapted_logger +# log_custom_handlers = +# +# If set, log_udp_host will override log_address +# log_udp_host = +# log_udp_port = 514 +# +# You can enable StatsD logging here: +# log_statsd_host = localhost +# log_statsd_port = 8125 +# log_statsd_default_sample_rate = 1.0 +# log_statsd_sample_rate_factor = 1.0 +# log_statsd_metric_prefix = +# +# If you don't mind the extra disk space usage in overhead, you can turn this +# on to preallocate disk space with SQLite databases to decrease fragmentation. +# db_preallocation = off +# +# eventlet_debug = false +# +# You can set fallocate_reserve to the number of bytes you'd like fallocate to +# reserve, whether there is space for the given file size or not. +# fallocate_reserve = 0 + +[pipeline:main] +pipeline = healthcheck recon container-server + +[app:container-server] +use = egg:swift#container +# You can override the default log routing for this app here: +# set log_name = container-server +# set log_facility = LOG_LOCAL0 +# set log_level = INFO +# set log_requests = true +# set log_address = /dev/log +# +# node_timeout = 3 +# conn_timeout = 0.5 +# allow_versions = false +# auto_create_account_prefix = . +# +# Configure parameter for creating specific server +# To handle all verbs, including replication verbs, do not specify +# "replication_server" (this is the default). To only handle replication, +# set to a True value (e.g. "True" or "1"). To handle only non-replication +# verbs, set to "False". Unless you have a separate replication network, you +# should not specify any value for "replication_server". +# replication_server = false + +[filter:healthcheck] +use = egg:swift#healthcheck +# An optional filesystem path, which if present, will cause the healthcheck +# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE" +# disable_path = + +[filter:recon] +use = egg:swift#recon +recon_cache_path = /var/cache/swift + +[container-replicator] +# You can override the default log routing for this app here (don't use set!): +# log_name = container-replicator +# log_facility = LOG_LOCAL0 +# log_level = INFO +# log_address = /dev/log +# +# vm_test_mode = no +# per_diff = 1000 +# max_diffs = 100 +# concurrency = 8 +# interval = 30 +# node_timeout = 10 +# conn_timeout = 0.5 +# +# The replicator also performs reclamation +# reclaim_age = 604800 +# +# Time in seconds to wait between replication passes +# Note: if the parameter 'interval' is defined then it will be used in place +# of run_pause. +# run_pause = 30 +# +# recon_cache_path = /var/cache/swift + +[container-updater] +# You can override the default log routing for this app here (don't use set!): +# log_name = container-updater +# log_facility = LOG_LOCAL0 +# log_level = INFO +# log_address = /dev/log +# +# interval = 300 +# concurrency = 4 +# node_timeout = 3 +# conn_timeout = 0.5 +# +# slowdown will sleep that amount between containers +# slowdown = 0.01 +# +# Seconds to suppress updating an account that has generated an error +# account_suppression_time = 60 +# +# recon_cache_path = /var/cache/swift + +[container-auditor] +# You can override the default log routing for this app here (don't use set!): +# log_name = container-auditor +# log_facility = LOG_LOCAL0 +# log_level = INFO +# log_address = /dev/log +# +# Will audit each container at most once per interval +# interval = 1800 +# +# containers_per_second = 200 +# recon_cache_path = /var/cache/swift + +[container-sync] +# You can override the default log routing for this app here (don't use set!): +# log_name = container-sync +# log_facility = LOG_LOCAL0 +# log_level = INFO +# log_address = /dev/log +# +# If you need to use an HTTP Proxy, set it here; defaults to no proxy. +# You can also set this to a comma separated list of HTTP Proxies and they will +# be randomly used (simple load balancing). +# sync_proxy = http://10.1.1.1:8888,http://10.1.1.2:8888 +# +# Will sync each container at most once per interval +# interval = 300 +# +# Maximum amount of time to spend syncing each container per pass +# container_time = 60 + +# Note: Put it at the beginning of the pipeline to profile all middleware. But +# it is safer to put this after healthcheck. +[filter:xprofile] +use = egg:swift#xprofile +# This option enable you to switch profilers which should inherit from python +# standard profiler. Currently the supported value can be 'cProfile', +# 'eventlet.green.profile' etc. +# profile_module = eventlet.green.profile +# +# This prefix will be used to combine process ID and timestamp to name the +# profile data file. Make sure the executing user has permission to write +# into this path (missing path segments will be created, if necessary). +# If you enable profiling in more than one type of daemon, you must override +# it with an unique value like: /var/log/swift/profile/container.profile +# log_filename_prefix = /tmp/log/swift/profile/default.profile +# +# the profile data will be dumped to local disk based on above naming rule +# in this interval. +# dump_interval = 5.0 +# +# Be careful, this option will enable profiler to dump data into the file with +# time stamp which means there will be lots of files piled up in the directory. +# dump_timestamp = false +# +# This is the path of the URL to access the mini web UI. +# path = /__profile__ +# +# Clear the data when the wsgi server shutdown. +# flush_at_shutdown = false +# +# unwind the iterator of applications +# unwind = false diff --git a/swift/usr/share/swift/etc/swift/object-server.j2 b/swift/usr/share/swift/etc/swift/object-server.j2 new file mode 100644 index 00000000..66990be9 --- /dev/null +++ b/swift/usr/share/swift/etc/swift/object-server.j2 @@ -0,0 +1,283 @@ +[DEFAULT] +# bind_ip = 0.0.0.0 +bind_ip = {{ MANAGEMENT_INTERFACE_IP_ADDRESS }} +bind_port = 6000 +# bind_timeout = 30 +# backlog = 4096 +user = swift +swift_dir = /etc/swift +devices = /srv/node +# mount_check = true +# disable_fallocate = false +# expiring_objects_container_divisor = 86400 +# expiring_objects_account_name = expiring_objects +# +# Use an integer to override the number of pre-forked processes that will +# accept connections. +# workers = auto +# +# Maximum concurrent requests per worker +# max_clients = 1024 +# +# You can specify default log routing here if you want: +# log_name = swift +# log_facility = LOG_LOCAL0 +# log_level = INFO +# log_address = /dev/log +# The following caps the length of log lines to the value given; no limit if +# set to 0, the default. +# log_max_line_length = 0 +# +# comma separated list of functions to call to setup custom log handlers. +# functions get passed: conf, name, log_to_console, log_route, fmt, logger, +# adapted_logger +# log_custom_handlers = +# +# If set, log_udp_host will override log_address +# log_udp_host = +# log_udp_port = 514 +# +# You can enable StatsD logging here: +# log_statsd_host = localhost +# log_statsd_port = 8125 +# log_statsd_default_sample_rate = 1.0 +# log_statsd_sample_rate_factor = 1.0 +# log_statsd_metric_prefix = +# +# eventlet_debug = false +# +# You can set fallocate_reserve to the number of bytes you'd like fallocate to +# reserve, whether there is space for the given file size or not. +# fallocate_reserve = 0 +# +# Time to wait while attempting to connect to another backend node. +# conn_timeout = 0.5 +# Time to wait while sending each chunk of data to another backend node. +# node_timeout = 3 +# Time to wait while receiving each chunk of data from a client or another +# backend node. +# client_timeout = 60 +# +# network_chunk_size = 65536 +# disk_chunk_size = 65536 + +[pipeline:main] +pipeline = healthcheck recon object-server + +[app:object-server] +use = egg:swift#object +# You can override the default log routing for this app here: +# set log_name = object-server +# set log_facility = LOG_LOCAL0 +# set log_level = INFO +# set log_requests = true +# set log_address = /dev/log +# +# max_upload_time = 86400 +# slow = 0 +# +# Objects smaller than this are not evicted from the buffercache once read +# keep_cache_size = 5424880 +# +# If true, objects for authenticated GET requests may be kept in buffer cache +# if small enough +# keep_cache_private = false +# +# on PUTs, sync data every n MB +# mb_per_sync = 512 +# +# Comma separated list of headers that can be set in metadata on an object. +# This list is in addition to X-Object-Meta-* headers and cannot include +# Content-Type, etag, Content-Length, or deleted +# allowed_headers = Content-Disposition, Content-Encoding, X-Delete-At, X-Object-Manifest, X-Static-Large-Object +# +# auto_create_account_prefix = . +# +# A value of 0 means "don't use thread pools". A reasonable starting point is +# 4. +# threads_per_disk = 0 +# +# Configure parameter for creating specific server +# To handle all verbs, including replication verbs, do not specify +# "replication_server" (this is the default). To only handle replication, +# set to a True value (e.g. "True" or "1"). To handle only non-replication +# verbs, set to "False". Unless you have a separate replication network, you +# should not specify any value for "replication_server". +# replication_server = false +# +# Set to restrict the number of concurrent incoming REPLICATION requests +# Set to 0 for unlimited +# Note that REPLICATION is currently an ssync only item +# replication_concurrency = 4 +# +# Restricts incoming REPLICATION requests to one per device, +# replication_currency above allowing. This can help control I/O to each +# device, but you may wish to set this to False to allow multiple REPLICATION +# requests (up to the above replication_concurrency setting) per device. +# replication_one_per_device = True +# +# Number of seconds to wait for an existing replication device lock before +# giving up. +# replication_lock_timeout = 15 +# +# These next two settings control when the REPLICATION subrequest handler will +# abort an incoming REPLICATION attempt. An abort will occur if there are at +# least threshold number of failures and the value of failures / successes +# exceeds the ratio. The defaults of 100 and 1.0 means that at least 100 +# failures have to occur and there have to be more failures than successes for +# an abort to occur. +# replication_failure_threshold = 100 +# replication_failure_ratio = 1.0 +# +# Use splice() for zero-copy object GETs. This requires Linux kernel +# version 3.0 or greater. If you set "splice = yes" but the kernel +# does not support it, error messages will appear in the object server +# logs at startup, but your object servers should continue to function. +# +# splice = no + +[filter:healthcheck] +use = egg:swift#healthcheck +# An optional filesystem path, which if present, will cause the healthcheck +# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE" +# disable_path = + +[filter:recon] +use = egg:swift#recon +recon_cache_path = /var/cache/swift +#recon_lock_path = /var/lock + +[object-replicator] +# You can override the default log routing for this app here (don't use set!): +# log_name = object-replicator +# log_facility = LOG_LOCAL0 +# log_level = INFO +# log_address = /dev/log +# +# vm_test_mode = no +# daemonize = on +# run_pause = 30 +# concurrency = 1 +# stats_interval = 300 +# +# The sync method to use; default is rsync but you can use ssync to try the +# EXPERIMENTAL all-swift-code-no-rsync-callouts method. Once ssync is verified +# as having performance comparable to, or better than, rsync, we plan to +# deprecate rsync so we can move on with more features for replication. +# sync_method = rsync +# +# max duration of a partition rsync +# rsync_timeout = 900 +# +# bandwidth limit for rsync in kB/s. 0 means unlimited +# rsync_bwlimit = 0 +# +# passed to rsync for io op timeout +# rsync_io_timeout = 30 +# +# node_timeout = <whatever's in the DEFAULT section or 10> +# max duration of an http request; this is for REPLICATE finalization calls and +# so should be longer than node_timeout +# http_timeout = 60 +# +# attempts to kill all workers if nothing replicates for lockup_timeout seconds +# lockup_timeout = 1800 +# +# The replicator also performs reclamation +# reclaim_age = 604800 +# +# ring_check_interval = 15 +# recon_cache_path = /var/cache/swift +# +# limits how long rsync error log lines are +# 0 means to log the entire line +# rsync_error_log_line_length = 0 +# +# handoffs_first and handoff_delete are options for a special case +# such as disk full in the cluster. These two options SHOULD NOT BE +# CHANGED, except for such an extreme situations. (e.g. disks filled up +# or are about to fill up. Anyway, DO NOT let your drives fill up) +# handoffs_first is the flag to replicate handoffs prior to canonical +# partitions. It allows to force syncing and deleting handoffs quickly. +# If set to a True value(e.g. "True" or "1"), partitions +# that are not supposed to be on the node will be replicated first. +# handoffs_first = False +# +# handoff_delete is the number of replicas which are ensured in swift. +# If the number less than the number of replicas is set, object-replicator +# could delete local handoffs even if all replicas are not ensured in the +# cluster. Object-replicator would remove local handoff partition directories +# after syncing partition when the number of successful responses is greater +# than or equal to this number. By default(auto), handoff partitions will be +# removed when it has successfully replicated to all the canonical nodes. +# handoff_delete = auto + +[object-updater] +# You can override the default log routing for this app here (don't use set!): +# log_name = object-updater +# log_facility = LOG_LOCAL0 +# log_level = INFO +# log_address = /dev/log +# +# interval = 300 +# concurrency = 1 +# node_timeout = <whatever's in the DEFAULT section or 10> +# slowdown will sleep that amount between objects +# slowdown = 0.01 +# +# recon_cache_path = /var/cache/swift + +[object-auditor] +# You can override the default log routing for this app here (don't use set!): +# log_name = object-auditor +# log_facility = LOG_LOCAL0 +# log_level = INFO +# log_address = /dev/log +# +# You can set the disk chunk size that the auditor uses making it larger if +# you like for more efficient local auditing of larger objects +# disk_chunk_size = 65536 +# files_per_second = 20 +# concurrency = 1 +# bytes_per_second = 10000000 +# log_time = 3600 +# zero_byte_files_per_second = 50 +# recon_cache_path = /var/cache/swift + +# Takes a comma separated list of ints. If set, the object auditor will +# increment a counter for every object whose size is <= to the given break +# points and report the result after a full scan. +# object_size_stats = + +# Note: Put it at the beginning of the pipleline to profile all middleware. But +# it is safer to put this after healthcheck. +[filter:xprofile] +use = egg:swift#xprofile +# This option enable you to switch profilers which should inherit from python +# standard profiler. Currently the supported value can be 'cProfile', +# 'eventlet.green.profile' etc. +# profile_module = eventlet.green.profile +# +# This prefix will be used to combine process ID and timestamp to name the +# profile data file. Make sure the executing user has permission to write +# into this path (missing path segments will be created, if necessary). +# If you enable profiling in more than one type of daemon, you must override +# it with an unique value like: /var/log/swift/profile/object.profile +# log_filename_prefix = /tmp/log/swift/profile/default.profile +# +# the profile data will be dumped to local disk based on above naming rule +# in this interval. +# dump_interval = 5.0 +# +# Be careful, this option will enable profiler to dump data into the file with +# time stamp which means there will be lots of files piled up in the directory. +# dump_timestamp = false +# +# This is the path of the URL to access the mini web UI. +# path = /__profile__ +# +# Clear the data when the wsgi server shutdown. +# flush_at_shutdown = false +# +# unwind the iterator of applications +# unwind = false diff --git a/swift/usr/share/swift/etc/swift/swift.j2 b/swift/usr/share/swift/etc/swift/swift.j2 new file mode 100644 index 00000000..6d76215a --- /dev/null +++ b/swift/usr/share/swift/etc/swift/swift.j2 @@ -0,0 +1,118 @@ +[swift-hash] + +# swift_hash_path_suffix and swift_hash_path_prefix are used as part of the +# the hashing algorithm when determining data placement in the cluster. +# These values should remain secret and MUST NOT change +# once a cluster has been deployed. + +swift_hash_path_suffix = {{ SWIFT_HASH_PATH_SUFFIX }} +swift_hash_path_prefix = {{ SWIFT_HASH_PATH_PREFIX }} + +# storage policies are defined here and determine various characteristics +# about how objects are stored and treated. Policies are specified by name on +# a per container basis. Names are case-insensitive. The policy index is +# specified in the section header and is used internally. The policy with +# index 0 is always used for legacy containers and can be given a name for use +# in metadata however the ring file name will always be 'object.ring.gz' for +# backwards compatibility. If no policies are defined a policy with index 0 +# will be automatically created for backwards compatibility and given the name +# Policy-0. A default policy is used when creating new containers when no +# policy is specified in the request. If no other policies are defined the +# policy with index 0 will be declared the default. If multiple policies are +# defined you must define a policy with index 0 and you must specify a +# default. It is recommended you always define a section for +# storage-policy:0. +[storage-policy:0] +name = Policy-0 +default = yes + +# the following section would declare a policy called 'silver', the number of +# replicas will be determined by how the ring is built. In this example the +# 'silver' policy could have a lower or higher # of replicas than the +# 'Policy-0' policy above. The ring filename will be 'object-1.ring.gz'. You +# may only specify one storage policy section as the default. If you changed +# this section to specify 'silver' as the default, when a client created a new +# container w/o a policy specified, it will get the 'silver' policy because +# this config has specified it as the default. However if a legacy container +# (one created with a pre-policy version of swift) is accessed, it is known +# implicitly to be assigned to the policy with index 0 as opposed to the +# current default. +#[storage-policy:1] +#name = silver + +# The swift-constraints section sets the basic constraints on data +# saved in the swift cluster. These constraints are automatically +# published by the proxy server in responses to /info requests. + +[swift-constraints] + +# max_file_size is the largest "normal" object that can be saved in +# the cluster. This is also the limit on the size of each segment of +# a "large" object when using the large object manifest support. +# This value is set in bytes. Setting it to lower than 1MiB will cause +# some tests to fail. It is STRONGLY recommended to leave this value at +# the default (5 * 2**30 + 2). + +#max_file_size = 5368709122 + + +# max_meta_name_length is the max number of bytes in the utf8 encoding +# of the name portion of a metadata header. + +#max_meta_name_length = 128 + + +# max_meta_value_length is the max number of bytes in the utf8 encoding +# of a metadata value + +#max_meta_value_length = 256 + + +# max_meta_count is the max number of metadata keys that can be stored +# on a single account, container, or object + +#max_meta_count = 90 + + +# max_meta_overall_size is the max number of bytes in the utf8 encoding +# of the metadata (keys + values) + +#max_meta_overall_size = 4096 + +# max_header_size is the max number of bytes in the utf8 encoding of each +# header. Using 8192 as default because eventlet use 8192 as max size of +# header line. This value may need to be increased when using identity +# v3 API tokens including more than 7 catalog entries. +# See also include_service_catalog in proxy-server.conf-sample +# (documented in overview_auth.rst) + +#max_header_size = 8192 + + +# max_object_name_length is the max number of bytes in the utf8 encoding +# of an object name + +#max_object_name_length = 1024 + + +# container_listing_limit is the default (and max) number of items +# returned for a container listing request + +#container_listing_limit = 10000 + + +# account_listing_limit is the default (and max) number of items returned +# for an account listing request +#account_listing_limit = 10000 + + +# max_account_name_length is the max number of bytes in the utf8 encoding +# of an account name + +#max_account_name_length = 256 + + +# max_container_name_length is the max number of bytes in the utf8 encoding +# of a container name + +#max_container_name_length = 256 diff --git a/swift/usr/share/swift/hosts b/swift/usr/share/swift/hosts new file mode 100644 index 00000000..5b97818d --- /dev/null +++ b/swift/usr/share/swift/hosts @@ -0,0 +1 @@ +localhost ansible_connection=local diff --git a/swift/usr/share/swift/swift-storage.yml b/swift/usr/share/swift/swift-storage.yml new file mode 100644 index 00000000..62a335ed --- /dev/null +++ b/swift/usr/share/swift/swift-storage.yml @@ -0,0 +1,24 @@ +--- +- hosts: localhost + vars_files: + - swift-storage-vars.yml + vars: + remote_user: root + tasks: + - user: name=swift comment="Swift user" + - file: path=/etc/swift owner=swift group=swift state=directory recurse=yes + + - template: src=/usr/share/swift/etc/rsyncd.j2 dest=/etc/rsyncd.conf + mode=0644 owner=swift group=swift + + - template: src=/usr/share/swift/etc/swift/{{ item }}.j2 + dest=/etc/swift/{{ item }}.conf mode=0644 owner=swift group=swift + with_items: + - account-server + - container-server + - object-server + - swift + + - file: path=/srv/node owner=swift group=swift state=directory recurse=yes + - file: path=/var/cache/swift owner=swift group=swift state=directory + recurse=yes |