summaryrefslogtreecommitdiff
path: root/openstack/usr/share/openstack/neutron/plugins
diff options
context:
space:
mode:
Diffstat (limited to 'openstack/usr/share/openstack/neutron/plugins')
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/bigswitch/restproxy.ini114
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/bigswitch/ssl/ca_certs/README3
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/bigswitch/ssl/host_certs/README6
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/brocade/brocade.ini29
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/cisco/cisco_cfg_agent.ini15
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/cisco/cisco_plugins.ini100
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/cisco/cisco_router_plugin.ini76
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/cisco/cisco_vpn_agent.ini26
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/embrane/heleos_conf.ini41
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/hyperv/hyperv_neutron_plugin.ini63
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/ibm/sdnve_neutron_plugin.ini50
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/linuxbridge/linuxbridge_conf.ini78
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/metaplugin/metaplugin.ini31
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/midonet/midonet.ini19
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf.ini71
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_arista.ini100
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_brocade.ini15
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_cisco.ini118
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_fslsdn.ini52
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_mlnx.ini4
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_ncs.ini28
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_odl.ini30
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_ofa.ini13
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_sriov.ini31
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/mlnx/mlnx_conf.ini79
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/nec/nec.ini60
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/nuage/nuage_plugin.ini41
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/oneconvergence/nvsdplugin.ini35
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/opencontrail/contrailplugin.ini26
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/openvswitch/ovs_neutron_plugin.ini190
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/plumgrid/plumgrid.ini14
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/ryu/ryu.ini44
-rw-r--r--openstack/usr/share/openstack/neutron/plugins/vmware/nsx.ini200
33 files changed, 1802 insertions, 0 deletions
diff --git a/openstack/usr/share/openstack/neutron/plugins/bigswitch/restproxy.ini b/openstack/usr/share/openstack/neutron/plugins/bigswitch/restproxy.ini
new file mode 100644
index 00000000..256f7855
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/bigswitch/restproxy.ini
@@ -0,0 +1,114 @@
+# Config file for neutron-proxy-plugin.
+
+[restproxy]
+# All configuration for this plugin is in section '[restproxy]'
+#
+# The following parameters are supported:
+# servers : <host:port>[,<host:port>]* (Error if not set)
+# server_auth : <username:password> (default: no auth)
+# server_ssl : True | False (default: True)
+# ssl_cert_directory : <path> (default: /etc/neutron/plugins/bigswitch/ssl)
+# no_ssl_validation : True | False (default: False)
+# ssl_sticky : True | False (default: True)
+# sync_data : True | False (default: False)
+# auto_sync_on_failure : True | False (default: True)
+# consistency_interval : <integer> (default: 60 seconds)
+# server_timeout : <integer> (default: 10 seconds)
+# neutron_id : <string> (default: neutron-<hostname>)
+# add_meta_server_route : True | False (default: True)
+# thread_pool_size : <int> (default: 4)
+
+# A comma separated list of BigSwitch or Floodlight servers and port numbers. The plugin proxies the requests to the BigSwitch/Floodlight server, which performs the networking configuration. Note that only one server is needed per deployment, but you may wish to deploy multiple servers to support failover.
+servers=localhost:8080
+
+# The username and password for authenticating against the BigSwitch or Floodlight controller.
+# server_auth=username:password
+
+# Use SSL when connecting to the BigSwitch or Floodlight controller.
+# server_ssl=True
+
+# Directory which contains the ca_certs and host_certs to be used to validate
+# controller certificates.
+# ssl_cert_directory=/etc/neutron/plugins/bigswitch/ssl/
+
+# If a certificate does not exist for a controller, trust and store the first
+# certificate received for that controller and use it to validate future
+# connections to that controller.
+# ssl_sticky=True
+
+# Do not validate the controller certificates for SSL
+# Warning: This will not provide protection against man-in-the-middle attacks
+# no_ssl_validation=False
+
+# Sync data on connect
+# sync_data=False
+
+# If neutron fails to create a resource because the backend controller
+# doesn't know of a dependency, automatically trigger a full data
+# synchronization to the controller.
+# auto_sync_on_failure=True
+
+# Time between verifications that the backend controller
+# database is consistent with Neutron. (0 to disable)
+# consistency_interval = 60
+
+# Maximum number of seconds to wait for proxy request to connect and complete.
+# server_timeout=10
+
+# User defined identifier for this Neutron deployment
+# neutron_id =
+
+# Flag to decide if a route to the metadata server should be injected into the VM
+# add_meta_server_route = True
+
+# Number of threads to use to handle large volumes of port creation requests
+# thread_pool_size = 4
+
+[nova]
+# Specify the VIF_TYPE that will be controlled on the Nova compute instances
+# options: ivs or ovs
+# default: ovs
+# vif_type = ovs
+
+# Overrides for vif types based on nova compute node host IDs
+# Comma separated list of host IDs to fix to a specific VIF type
+# The VIF type is taken from the end of the configuration item
+# node_override_vif_<vif_type>
+# For example, the following would set the VIF type to IVS for
+# host-id1 and host-id2
+# node_overrride_vif_ivs=host-id1,host-id2
+
+[router]
+# Specify the default router rules installed in newly created tenant routers
+# Specify multiple times for multiple rules
+# Format is <tenant>:<source>:<destination>:<action>
+# Optionally, a comma-separated list of nexthops may be included after <action>
+# Use an * to specify default for all tenants
+# Default is any any allow for all tenants
+# tenant_default_router_rule=*:any:any:permit
+
+# Maximum number of rules that a single router may have
+# Default is 200
+# max_router_rules=200
+
+[restproxyagent]
+
+# Specify the name of the bridge used on compute nodes
+# for attachment.
+# Default: br-int
+# integration_bridge=br-int
+
+# Change the frequency of polling by the restproxy agent.
+# Value is seconds
+# Default: 5
+# polling_interval=5
+
+# Virtual switch type on the compute node.
+# Options: ovs or ivs
+# Default: ovs
+# virtual_switch_type = ovs
+
+[securitygroup]
+# Controls if neutron security group is enabled or not.
+# It should be false when you use nova security group.
+# enable_security_group = True
diff --git a/openstack/usr/share/openstack/neutron/plugins/bigswitch/ssl/ca_certs/README b/openstack/usr/share/openstack/neutron/plugins/bigswitch/ssl/ca_certs/README
new file mode 100644
index 00000000..e7e47a27
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/bigswitch/ssl/ca_certs/README
@@ -0,0 +1,3 @@
+Certificates in this folder will be used to
+verify signatures for any controllers the plugin
+connects to.
diff --git a/openstack/usr/share/openstack/neutron/plugins/bigswitch/ssl/host_certs/README b/openstack/usr/share/openstack/neutron/plugins/bigswitch/ssl/host_certs/README
new file mode 100644
index 00000000..8f5f5e77
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/bigswitch/ssl/host_certs/README
@@ -0,0 +1,6 @@
+Certificates in this folder must match the name
+of the controller they should be used to authenticate
+with a .pem extension.
+
+For example, the certificate for the controller
+"192.168.0.1" should be named "192.168.0.1.pem".
diff --git a/openstack/usr/share/openstack/neutron/plugins/brocade/brocade.ini b/openstack/usr/share/openstack/neutron/plugins/brocade/brocade.ini
new file mode 100644
index 00000000..916e9e5d
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/brocade/brocade.ini
@@ -0,0 +1,29 @@
+[switch]
+# username = The SSH username to use
+# password = The SSH password to use
+# address = The address of the host to SSH to
+# ostype = Should be NOS, but is unused otherwise
+#
+# Example:
+# username = admin
+# password = password
+# address = 10.24.84.38
+# ostype = NOS
+
+[physical_interface]
+# physical_interface = The network interface to use when creating a port
+#
+# Example:
+# physical_interface = physnet1
+
+[vlans]
+# network_vlan_ranges = <physical network name>:nnnn:mmmm
+#
+# Example:
+# network_vlan_ranges = physnet1:1000:2999
+
+[linux_bridge]
+# physical_interface_mappings = <physical network name>:<local interface>
+#
+# Example:
+# physical_interface_mappings = physnet1:em1
diff --git a/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_cfg_agent.ini b/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_cfg_agent.ini
new file mode 100644
index 00000000..d99e8382
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_cfg_agent.ini
@@ -0,0 +1,15 @@
+[cfg_agent]
+# (IntOpt) Interval in seconds for processing of service updates.
+# That is when the config agent's process_services() loop executes
+# and it lets each service helper to process its service resources.
+# rpc_loop_interval = 10
+
+# (StrOpt) Period-separated module path to the routing service helper class.
+# routing_svc_helper_class = neutron.plugins.cisco.cfg_agent.service_helpers.routing_svc_helper.RoutingServiceHelper
+
+# (IntOpt) Timeout value in seconds for connecting to a hosting device.
+# device_connection_timeout = 30
+
+# (IntOpt) The time in seconds until a backlogged hosting device is
+# presumed dead or booted to an error state.
+# hosting_device_dead_timeout = 300
diff --git a/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_plugins.ini b/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_plugins.ini
new file mode 100644
index 00000000..17eae737
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_plugins.ini
@@ -0,0 +1,100 @@
+[cisco]
+
+# (StrOpt) A short prefix to prepend to the VLAN number when creating a
+# VLAN interface. For example, if an interface is being created for
+# VLAN 2001 it will be named 'q-2001' using the default prefix.
+#
+# vlan_name_prefix = q-
+# Example: vlan_name_prefix = vnet-
+
+# (StrOpt) A short prefix to prepend to the VLAN number when creating a
+# provider VLAN interface. For example, if an interface is being created
+# for provider VLAN 3003 it will be named 'p-3003' using the default prefix.
+#
+# provider_vlan_name_prefix = p-
+# Example: provider_vlan_name_prefix = PV-
+
+# (BoolOpt) A flag indicating whether Openstack networking should manage the
+# creation and removal of VLAN interfaces for provider networks on the Nexus
+# switches. If the flag is set to False then Openstack will not create or
+# remove VLAN interfaces for provider networks, and the administrator needs
+# to manage these interfaces manually or by external orchestration.
+#
+# provider_vlan_auto_create = True
+
+# (BoolOpt) A flag indicating whether Openstack networking should manage
+# the adding and removing of provider VLANs from trunk ports on the Nexus
+# switches. If the flag is set to False then Openstack will not add or
+# remove provider VLANs from trunk ports, and the administrator needs to
+# manage these operations manually or by external orchestration.
+#
+# provider_vlan_auto_trunk = True
+
+# (StrOpt) Period-separated module path to the model class to use for
+# the Cisco neutron plugin.
+#
+# model_class = neutron.plugins.cisco.models.virt_phy_sw_v2.VirtualPhysicalSwitchModelV2
+
+# (BoolOpt) A flag to enable Layer 3 support on the Nexus switches.
+# Note: This feature is not supported on all models/versions of Cisco
+# Nexus switches. To use this feature, all of the Nexus switches in the
+# deployment must support it.
+# nexus_l3_enable = False
+
+# (BoolOpt) A flag to enable round robin scheduling of routers for SVI.
+# svi_round_robin = False
+
+# Cisco Nexus Switch configurations.
+# Each switch to be managed by Openstack Neutron must be configured here.
+#
+# N1KV Format.
+# [N1KV:<IP address of VSM>]
+# username=<credential username>
+# password=<credential password>
+#
+# Example:
+# [N1KV:2.2.2.2]
+# username=admin
+# password=mySecretPassword
+
+[cisco_n1k]
+
+# (StrOpt) Specify the name of the integration bridge to which the VIFs are
+# attached.
+# Default value: br-int
+# integration_bridge = br-int
+
+# (StrOpt) Name of the policy profile to be associated with a port when no
+# policy profile is specified during port creates.
+# Default value: service_profile
+# default_policy_profile = service_profile
+
+# (StrOpt) Name of the policy profile to be associated with a port owned by
+# network node (dhcp, router).
+# Default value: dhcp_pp
+# network_node_policy_profile = dhcp_pp
+
+# (StrOpt) Name of the network profile to be associated with a network when no
+# network profile is specified during network creates. Admin should pre-create
+# a network profile with this name.
+# Default value: default_network_profile
+# default_network_profile = network_pool
+
+# (IntOpt) Time in seconds for which the plugin polls the VSM for updates in
+# policy profiles.
+# Default value: 60
+# poll_duration = 60
+
+# (BoolOpt) Specify whether tenants are restricted from accessing all the
+# policy profiles.
+# Default value: False, indicating all tenants can access all policy profiles.
+#
+# restrict_policy_profiles = False
+
+# (IntOpt) Number of threads to use to make HTTP requests to the VSM.
+# Default value: 4
+# http_pool_size = 4
+
+# (IntOpt) Timeout duration in seconds for the http request
+# Default value: 15
+# http_timeout = 15
diff --git a/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_router_plugin.ini b/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_router_plugin.ini
new file mode 100644
index 00000000..3ef271d2
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_router_plugin.ini
@@ -0,0 +1,76 @@
+[general]
+#(IntOpt) Time in seconds between renewed scheduling attempts of non-scheduled routers
+# backlog_processing_interval = 10
+
+#(StrOpt) Name of the L3 admin tenant
+# l3_admin_tenant = L3AdminTenant
+
+#(StrOpt) Name of management network for hosting device configuration
+# management_network = osn_mgmt_nw
+
+#(StrOpt) Default security group applied on management port
+# default_security_group = mgmt_sec_grp
+
+#(IntOpt) Seconds of no status update until a cfg agent is considered down
+# cfg_agent_down_time = 60
+
+#(StrOpt) Path to templates for hosting devices
+# templates_path = /opt/stack/data/neutron/cisco/templates
+
+#(StrOpt) Path to config drive files for service VM instances
+# service_vm_config_path = /opt/stack/data/neutron/cisco/config_drive
+
+#(BoolOpt) Ensure that Nova is running before attempting to create any VM
+# ensure_nova_running = True
+
+[hosting_devices]
+# Settings coupled to CSR1kv VM devices
+# -------------------------------------
+#(StrOpt) Name of Glance image for CSR1kv
+# csr1kv_image = csr1kv_openstack_img
+
+#(StrOpt) UUID of Nova flavor for CSR1kv
+# csr1kv_flavor = 621
+
+#(StrOpt) Plugging driver for CSR1kv
+# csr1kv_plugging_driver = neutron.plugins.cisco.l3.plugging_drivers.n1kv_trunking_driver.N1kvTrunkingPlugDriver
+
+#(StrOpt) Hosting device driver for CSR1kv
+# csr1kv_device_driver = neutron.plugins.cisco.l3.hosting_device_drivers.csr1kv_hd_driver.CSR1kvHostingDeviceDriver
+
+#(StrOpt) Config agent router service driver for CSR1kv
+# csr1kv_cfgagent_router_driver = neutron.plugins.cisco.cfg_agent.device_drivers.csr1kv.csr1kv_routing_driver.CSR1kvRoutingDriver
+
+#(StrOpt) Configdrive template file for CSR1kv
+# csr1kv_configdrive_template = csr1kv_cfg_template
+
+#(IntOpt) Booting time in seconds before a CSR1kv becomes operational
+# csr1kv_booting_time = 420
+
+#(StrOpt) Username to use for CSR1kv configurations
+# csr1kv_username = stack
+
+#(StrOpt) Password to use for CSR1kv configurations
+# csr1kv_password = cisco
+
+[n1kv]
+# Settings coupled to inter-working with N1kv plugin
+# --------------------------------------------------
+#(StrOpt) Name of N1kv port profile for management ports
+# management_port_profile = osn_mgmt_pp
+
+#(StrOpt) Name of N1kv port profile for T1 ports (i.e., ports carrying traffic
+# from VXLAN segmented networks).
+# t1_port_profile = osn_t1_pp
+
+#(StrOpt) Name of N1kv port profile for T2 ports (i.e., ports carrying traffic
+# from VLAN segmented networks).
+# t2_port_profile = osn_t2_pp
+
+#(StrOpt) Name of N1kv network profile for T1 networks (i.e., trunk networks
+# for VXLAN segmented traffic).
+# t1_network_profile = osn_t1_np
+
+#(StrOpt) Name of N1kv network profile for T2 networks (i.e., trunk networks
+# for VLAN segmented traffic).
+# t2_network_profile = osn_t2_np
diff --git a/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_vpn_agent.ini b/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_vpn_agent.ini
new file mode 100644
index 00000000..0aee17eb
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_vpn_agent.ini
@@ -0,0 +1,26 @@
+[cisco_csr_ipsec]
+# Status check interval in seconds, for VPNaaS IPSec connections used on CSR
+# status_check_interval = 60
+
+# Cisco CSR management port information for REST access used by VPNaaS
+# TODO(pcm): Remove once CSR is integrated in as a Neutron router.
+#
+# Format is:
+# [cisco_csr_rest:<public IP>]
+# rest_mgmt = <mgmt port IP>
+# tunnel_ip = <tunnel IP>
+# username = <user>
+# password = <password>
+# timeout = <timeout>
+# host = <hostname>
+# tunnel_if = <tunnel I/F>
+#
+# where:
+# public IP ----- Public IP address of router used with a VPN service (1:1 with CSR)
+# tunnel IP ----- Public IP address of the CSR used for the IPSec tunnel
+# mgmt port IP -- IP address of CSR for REST API access
+# user ---------- Username for REST management port access to Cisco CSR
+# password ------ Password for REST management port access to Cisco CSR
+# timeout ------- REST request timeout to Cisco CSR (optional)
+# hostname ------ Name of host where CSR is running as a VM
+# tunnel I/F ---- CSR port name used for tunnels' IP address
diff --git a/openstack/usr/share/openstack/neutron/plugins/embrane/heleos_conf.ini b/openstack/usr/share/openstack/neutron/plugins/embrane/heleos_conf.ini
new file mode 100644
index 00000000..0ca9b46f
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/embrane/heleos_conf.ini
@@ -0,0 +1,41 @@
+[heleos]
+#configure the ESM management address
+#in the first version of this plugin, only one ESM can be specified
+#Example:
+#esm_mgmt=
+
+#configure admin username and password
+#admin_username=
+#admin_password=
+
+#router image id
+#Example:
+#router_image=932ce713-e210-3d54-a0a5-518b0b5ee1b0
+
+#mgmt shared security zone id
+#defines the shared management security zone. Each tenant can have a private one configured through the ESM
+#Example:
+#mgmt_id=c0bc9b6c-f110-46cf-bb01-733bfe4b5a1a
+
+#in-band shared security zone id
+#defines the shared in-band security zone. Each tenant can have a private one configured through the ESM
+#Example:
+#inband_id=a6b7999d-3806-4b04-81f6-e0c5c8271afc
+
+#oob-band shared security zone id
+#defines the shared out-of-band security zone. Each tenant can have a private one configured through the ESM
+#Example:
+#oob_id=e7eda5cc-b977-46cb-9c14-cab43c1b7871
+
+#dummy security zone id
+#defines the dummy security zone ID. this security zone will be used by the DVAs with no neutron interfaces
+#Example:
+#dummy_utif_id=d9911310-25fc-4733-a2e0-c0eda024ef08
+
+#resource pool id
+#define the shared resource pool. Each tenant can have a private one configured through the ESM
+#Example
+#resource_pool_id=
+
+#define if the requests have to be executed asynchronously by the plugin or not
+#async_requests=
diff --git a/openstack/usr/share/openstack/neutron/plugins/hyperv/hyperv_neutron_plugin.ini b/openstack/usr/share/openstack/neutron/plugins/hyperv/hyperv_neutron_plugin.ini
new file mode 100644
index 00000000..5eeec570
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/hyperv/hyperv_neutron_plugin.ini
@@ -0,0 +1,63 @@
+[hyperv]
+# (StrOpt) Type of network to allocate for tenant networks. The
+# default value 'local' is useful only for single-box testing and
+# provides no connectivity between hosts. You MUST either change this
+# to 'vlan' and configure network_vlan_ranges below or to 'flat'.
+# Set to 'none' to disable creation of tenant networks.
+#
+# tenant_network_type = local
+# Example: tenant_network_type = vlan
+
+# (ListOpt) Comma-separated list of
+# <physical_network>[:<vlan_min>:<vlan_max>] tuples enumerating ranges
+# of VLAN IDs on named physical networks that are available for
+# allocation. All physical networks listed are available for flat and
+# VLAN provider network creation. Specified ranges of VLAN IDs are
+# available for tenant network allocation if tenant_network_type is
+# 'vlan'. If empty, only gre and local networks may be created.
+#
+# network_vlan_ranges =
+# Example: network_vlan_ranges = physnet1:1000:2999
+
+[agent]
+# Agent's polling interval in seconds
+# polling_interval = 2
+
+# (ListOpt) Comma separated list of <physical_network>:<vswitch>
+# where the physical networks can be expressed with wildcards,
+# e.g.: ."*:external".
+# The referred external virtual switches need to be already present on
+# the Hyper-V server.
+# If a given physical network name will not match any value in the list
+# the plugin will look for a virtual switch with the same name.
+#
+# physical_network_vswitch_mappings = *:external
+# Example: physical_network_vswitch_mappings = net1:external1,net2:external2
+
+# (StrOpt) Private virtual switch name used for local networking.
+#
+# local_network_vswitch = private
+# Example: local_network_vswitch = custom_vswitch
+
+# (BoolOpt) Enables metrics collections for switch ports by using Hyper-V's
+# metric APIs. Collected data can by retrieved by other apps and services,
+# e.g.: Ceilometer. Requires Hyper-V / Windows Server 2012 and above.
+#
+# enable_metrics_collection = False
+
+#-----------------------------------------------------------------------------
+# Sample Configurations.
+#-----------------------------------------------------------------------------
+#
+# Neutron server:
+#
+# [HYPERV]
+# tenant_network_type = vlan
+# network_vlan_ranges = default:2000:3999
+#
+# Agent running on Hyper-V node:
+#
+# [AGENT]
+# polling_interval = 2
+# physical_network_vswitch_mappings = *:external
+# local_network_vswitch = private
diff --git a/openstack/usr/share/openstack/neutron/plugins/ibm/sdnve_neutron_plugin.ini b/openstack/usr/share/openstack/neutron/plugins/ibm/sdnve_neutron_plugin.ini
new file mode 100644
index 00000000..0fab5070
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/ibm/sdnve_neutron_plugin.ini
@@ -0,0 +1,50 @@
+[sdnve]
+# (ListOpt) The IP address of one (or more) SDN-VE controllers
+# Default value is: controller_ips = 127.0.0.1
+# Example: controller_ips = 127.0.0.1,127.0.0.2
+# (StrOpt) The integration bridge for OF based implementation
+# The default value for integration_bridge is None
+# Example: integration_bridge = br-int
+# (ListOpt) The interface mapping connecting the integration
+# bridge to external network as a list of physical network names and
+# interfaces: <physical_network_name>:<interface_name>
+# Example: interface_mappings = default:eth2
+# (BoolOpt) Used to reset the integration bridge, if exists
+# The default value for reset_bridge is True
+# Example: reset_bridge = False
+# (BoolOpt) Used to set the OVS controller as out-of-band
+# The default value for out_of_band is True
+# Example: out_of_band = False
+#
+# (BoolOpt) The fake controller for testing purposes
+# Default value is: use_fake_controller = False
+# (StrOpt) The port number for use with controller
+# The default value for the port is 8443
+# Example: port = 8443
+# (StrOpt) The userid for use with controller
+# The default value for the userid is admin
+# Example: userid = sdnve_user
+# (StrOpt) The password for use with controller
+# The default value for the password is admin
+# Example: password = sdnve_password
+#
+# (StrOpt) The default type of tenants (and associated resources)
+# Available choices are: OVERLAY or OF
+# The default value for tenant type is OVERLAY
+# Example: default_tenant_type = OVERLAY
+# (StrOpt) The string in tenant description that indicates
+# Default value for OF tenants: of_signature = SDNVE-OF
+# (StrOpt) The string in tenant description that indicates
+# Default value for OVERLAY tenants: overlay_signature = SDNVE-OVERLAY
+
+[sdnve_agent]
+# (IntOpt) Agent's polling interval in seconds
+# polling_interval = 2
+# (StrOpt) What to use for root helper
+# The default value: root_helper = 'sudo'
+# (BoolOpt) Whether to use rpc or not
+# The default value: rpc = True
+
+[securitygroup]
+# The security group is not supported:
+# firewall_driver = neutron.agent.firewall.NoopFirewallDriver
diff --git a/openstack/usr/share/openstack/neutron/plugins/linuxbridge/linuxbridge_conf.ini b/openstack/usr/share/openstack/neutron/plugins/linuxbridge/linuxbridge_conf.ini
new file mode 100644
index 00000000..94fe9803
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/linuxbridge/linuxbridge_conf.ini
@@ -0,0 +1,78 @@
+[vlans]
+# (StrOpt) Type of network to allocate for tenant networks. The
+# default value 'local' is useful only for single-box testing and
+# provides no connectivity between hosts. You MUST change this to
+# 'vlan' and configure network_vlan_ranges below in order for tenant
+# networks to provide connectivity between hosts. Set to 'none' to
+# disable creation of tenant networks.
+#
+# tenant_network_type = local
+# Example: tenant_network_type = vlan
+
+# (ListOpt) Comma-separated list of
+# <physical_network>[:<vlan_min>:<vlan_max>] tuples enumerating ranges
+# of VLAN IDs on named physical networks that are available for
+# allocation. All physical networks listed are available for flat and
+# VLAN provider network creation. Specified ranges of VLAN IDs are
+# available for tenant network allocation if tenant_network_type is
+# 'vlan'. If empty, only local networks may be created.
+#
+# network_vlan_ranges =
+# Example: network_vlan_ranges = physnet1:1000:2999
+
+[linux_bridge]
+# (ListOpt) Comma-separated list of
+# <physical_network>:<physical_interface> tuples mapping physical
+# network names to the agent's node-specific physical network
+# interfaces to be used for flat and VLAN networks. All physical
+# networks listed in network_vlan_ranges on the server should have
+# mappings to appropriate interfaces on each agent.
+#
+# physical_interface_mappings =
+# Example: physical_interface_mappings = physnet1:eth1
+
+[vxlan]
+# (BoolOpt) enable VXLAN on the agent
+# VXLAN support can be enabled when agent is managed by ml2 plugin using
+# linuxbridge mechanism driver. Useless if set while using linuxbridge plugin.
+# enable_vxlan = False
+#
+# (IntOpt) use specific TTL for vxlan interface protocol packets
+# ttl =
+#
+# (IntOpt) use specific TOS for vxlan interface protocol packets
+# tos =
+#
+# (StrOpt) multicast group to use for broadcast emulation.
+# This group must be the same on all the agents.
+# vxlan_group = 224.0.0.1
+#
+# (StrOpt) Local IP address to use for VXLAN endpoints (required)
+# local_ip =
+#
+# (BoolOpt) Flag to enable l2population extension. This option should be used
+# in conjunction with ml2 plugin l2population mechanism driver (in that case,
+# both linuxbridge and l2population mechanism drivers should be loaded).
+# It enables plugin to populate VXLAN forwarding table, in order to limit
+# the use of broadcast emulation (multicast will be turned off if kernel and
+# iproute2 supports unicast flooding - requires 3.11 kernel and iproute2 3.10)
+# l2_population = False
+
+[agent]
+# Agent's polling interval in seconds
+# polling_interval = 2
+
+# (BoolOpt) Enable server RPC compatibility with old (pre-havana)
+# agents.
+#
+# rpc_support_old_agents = False
+# Example: rpc_support_old_agents = True
+
+[securitygroup]
+# Firewall driver for realizing neutron security group function
+# firewall_driver = neutron.agent.firewall.NoopFirewallDriver
+# Example: firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
+
+# Controls if neutron security group is enabled or not.
+# It should be false when you use nova security group.
+# enable_security_group = True
diff --git a/openstack/usr/share/openstack/neutron/plugins/metaplugin/metaplugin.ini b/openstack/usr/share/openstack/neutron/plugins/metaplugin/metaplugin.ini
new file mode 100644
index 00000000..2b9bfa5e
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/metaplugin/metaplugin.ini
@@ -0,0 +1,31 @@
+# Config file for Metaplugin
+
+[meta]
+# Comma separated list of flavor:neutron_plugin for plugins to load.
+# Extension method is searched in the list order and the first one is used.
+plugin_list = 'ml2:neutron.plugins.ml2.plugin.Ml2Plugin,nvp:neutron.plugins.vmware.plugin.NsxPluginV2'
+
+# Comma separated list of flavor:neutron_plugin for L3 service plugins
+# to load.
+# This is intended for specifying L2 plugins which support L3 functions.
+# If you use a router service plugin, set this blank.
+l3_plugin_list =
+
+# Default flavor to use, when flavor:network is not specified at network
+# creation.
+default_flavor = 'nvp'
+
+# Default L3 flavor to use, when flavor:router is not specified at router
+# creation.
+# Ignored if 'l3_plugin_list' is blank.
+default_l3_flavor =
+
+# Comma separated list of supported extension aliases.
+supported_extension_aliases = 'provider,binding,agent,dhcp_agent_scheduler'
+
+# Comma separated list of method:flavor to select specific plugin for a method.
+# This has priority over method search order based on 'plugin_list'.
+extension_map = 'get_port_stats:nvp'
+
+# Specifies flavor for plugin to handle 'q-plugin' RPC requests.
+rpc_flavor = 'ml2'
diff --git a/openstack/usr/share/openstack/neutron/plugins/midonet/midonet.ini b/openstack/usr/share/openstack/neutron/plugins/midonet/midonet.ini
new file mode 100644
index 00000000..f2e94052
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/midonet/midonet.ini
@@ -0,0 +1,19 @@
+
+[midonet]
+# MidoNet API server URI
+# midonet_uri = http://localhost:8080/midonet-api
+
+# MidoNet admin username
+# username = admin
+
+# MidoNet admin password
+# password = passw0rd
+
+# ID of the project that MidoNet admin user belongs to
+# project_id = 77777777-7777-7777-7777-777777777777
+
+# Virtual provider router ID
+# provider_router_id = 00112233-0011-0011-0011-001122334455
+
+# Path to midonet host uuid file
+# midonet_host_uuid_path = /etc/midolman/host_uuid.properties
diff --git a/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf.ini b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf.ini
new file mode 100644
index 00000000..4fb1a4a3
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf.ini
@@ -0,0 +1,71 @@
+[ml2]
+# (ListOpt) List of network type driver entrypoints to be loaded from
+# the neutron.ml2.type_drivers namespace.
+#
+# type_drivers = local,flat,vlan,gre,vxlan
+# Example: type_drivers = flat,vlan,gre,vxlan
+
+# (ListOpt) Ordered list of network_types to allocate as tenant
+# networks. The default value 'local' is useful for single-box testing
+# but provides no connectivity between hosts.
+#
+# tenant_network_types = local
+# Example: tenant_network_types = vlan,gre,vxlan
+
+# (ListOpt) Ordered list of networking mechanism driver entrypoints
+# to be loaded from the neutron.ml2.mechanism_drivers namespace.
+# mechanism_drivers =
+# Example: mechanism_drivers = openvswitch,mlnx
+# Example: mechanism_drivers = arista
+# Example: mechanism_drivers = cisco,logger
+# Example: mechanism_drivers = openvswitch,brocade
+# Example: mechanism_drivers = linuxbridge,brocade
+
+# (ListOpt) Ordered list of extension driver entrypoints
+# to be loaded from the neutron.ml2.extension_drivers namespace.
+# extension_drivers =
+# Example: extension_drivers = anewextensiondriver
+
+[ml2_type_flat]
+# (ListOpt) List of physical_network names with which flat networks
+# can be created. Use * to allow flat networks with arbitrary
+# physical_network names.
+#
+# flat_networks =
+# Example:flat_networks = physnet1,physnet2
+# Example:flat_networks = *
+
+[ml2_type_vlan]
+# (ListOpt) List of <physical_network>[:<vlan_min>:<vlan_max>] tuples
+# specifying physical_network names usable for VLAN provider and
+# tenant networks, as well as ranges of VLAN tags on each
+# physical_network available for allocation as tenant networks.
+#
+# network_vlan_ranges =
+# Example: network_vlan_ranges = physnet1:1000:2999,physnet2
+
+[ml2_type_gre]
+# (ListOpt) Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE tunnel IDs that are available for tenant network allocation
+# tunnel_id_ranges =
+
+[ml2_type_vxlan]
+# (ListOpt) Comma-separated list of <vni_min>:<vni_max> tuples enumerating
+# ranges of VXLAN VNI IDs that are available for tenant network allocation.
+#
+# vni_ranges =
+
+# (StrOpt) Multicast group for the VXLAN interface. When configured, will
+# enable sending all broadcast traffic to this multicast group. When left
+# unconfigured, will disable multicast VXLAN mode.
+#
+# vxlan_group =
+# Example: vxlan_group = 239.1.1.1
+
+[securitygroup]
+# Controls if neutron security group is enabled or not.
+# It should be false when you use nova security group.
+# enable_security_group = True
+
+# Use ipset to speed-up the iptables security groups. Enabling ipset support
+# requires that ipset is installed on L2 agent node.
+# enable_ipset = True
diff --git a/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_arista.ini b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_arista.ini
new file mode 100644
index 00000000..abaf5bc7
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_arista.ini
@@ -0,0 +1,100 @@
+# Defines configuration options specific for Arista ML2 Mechanism driver
+
+[ml2_arista]
+# (StrOpt) EOS IP address. This is required field. If not set, all
+# communications to Arista EOS will fail
+#
+# eapi_host =
+# Example: eapi_host = 192.168.0.1
+#
+# (StrOpt) EOS command API username. This is required field.
+# if not set, all communications to Arista EOS will fail.
+#
+# eapi_username =
+# Example: arista_eapi_username = admin
+#
+# (StrOpt) EOS command API password. This is required field.
+# if not set, all communications to Arista EOS will fail.
+#
+# eapi_password =
+# Example: eapi_password = my_password
+#
+# (StrOpt) Defines if hostnames are sent to Arista EOS as FQDNs
+# ("node1.domain.com") or as short names ("node1"). This is
+# optional. If not set, a value of "True" is assumed.
+#
+# use_fqdn =
+# Example: use_fqdn = True
+#
+# (IntOpt) Sync interval in seconds between Neutron plugin and EOS.
+# This field defines how often the synchronization is performed.
+# This is an optional field. If not set, a value of 180 seconds
+# is assumed.
+#
+# sync_interval =
+# Example: sync_interval = 60
+#
+# (StrOpt) Defines Region Name that is assigned to this OpenStack Controller.
+# This is useful when multiple OpenStack/Neutron controllers are
+# managing the same Arista HW clusters. Note that this name must
+# match with the region name registered (or known) to keystone
+# service. Authentication with Keysotne is performed by EOS.
+# This is optional. If not set, a value of "RegionOne" is assumed.
+#
+# region_name =
+# Example: region_name = RegionOne
+
+
+[l3_arista]
+
+# (StrOpt) primary host IP address. This is required field. If not set, all
+# communications to Arista EOS will fail. This is the host where
+# primary router is created.
+#
+# primary_l3_host =
+# Example: primary_l3_host = 192.168.10.10
+#
+# (StrOpt) Primary host username. This is required field.
+# if not set, all communications to Arista EOS will fail.
+#
+# primary_l3_host_username =
+# Example: arista_primary_l3_username = admin
+#
+# (StrOpt) Primary host password. This is required field.
+# if not set, all communications to Arista EOS will fail.
+#
+# primary_l3_host_password =
+# Example: primary_l3_password = my_password
+#
+# (StrOpt) IP address of the second Arista switch paired as
+# MLAG (Multi-chassis Link Aggregation) with the first.
+# This is optional field, however, if mlag_config flag is set,
+# then this is a required field. If not set, all
+# communications to Arista EOS will fail. If mlag_config is set
+# to False, then this field is ignored
+#
+# seconadary_l3_host =
+# Example: seconadary_l3_host = 192.168.10.20
+#
+# (BoolOpt) Defines if Arista switches are configured in MLAG mode
+# If yes, all L3 configuration is pushed to both switches
+# automatically. If this flag is set, ensure that secondary_l3_host
+# is set to the second switch's IP.
+# This flag is Optional. If not set, a value of "False" is assumed.
+#
+# mlag_config =
+# Example: mlag_config = True
+#
+# (BoolOpt) Defines if the router is created in default VRF or a
+# a specific VRF. This is optional.
+# If not set, a value of "False" is assumed.
+#
+# Example: use_vrf = True
+#
+# (IntOpt) Sync interval in seconds between Neutron plugin and EOS.
+# This field defines how often the synchronization is performed.
+# This is an optional field. If not set, a value of 180 seconds
+# is assumed.
+#
+# l3_sync_interval =
+# Example: l3_sync_interval = 60
diff --git a/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_brocade.ini b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_brocade.ini
new file mode 100644
index 00000000..67574110
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_brocade.ini
@@ -0,0 +1,15 @@
+[ml2_brocade]
+# username = <mgmt admin username>
+# password = <mgmt admin password>
+# address = <switch mgmt ip address>
+# ostype = NOS
+# osversion = autodetect | n.n.n
+# physical_networks = physnet1,physnet2
+#
+# Example:
+# username = admin
+# password = password
+# address = 10.24.84.38
+# ostype = NOS
+# osversion = 4.1.1
+# physical_networks = physnet1,physnet2
diff --git a/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_cisco.ini b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_cisco.ini
new file mode 100644
index 00000000..1b69100e
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_cisco.ini
@@ -0,0 +1,118 @@
+[ml2_cisco]
+
+# (StrOpt) A short prefix to prepend to the VLAN number when creating a
+# VLAN interface. For example, if an interface is being created for
+# VLAN 2001 it will be named 'q-2001' using the default prefix.
+#
+# vlan_name_prefix = q-
+# Example: vlan_name_prefix = vnet-
+
+# (BoolOpt) A flag to enable round robin scheduling of routers for SVI.
+# svi_round_robin = False
+
+#
+# (StrOpt) The name of the physical_network managed via the Cisco Nexus Switch.
+# This string value must be present in the ml2_conf.ini network_vlan_ranges
+# variable.
+#
+# managed_physical_network =
+# Example: managed_physical_network = physnet1
+
+# Cisco Nexus Switch configurations.
+# Each switch to be managed by Openstack Neutron must be configured here.
+#
+# Cisco Nexus Switch Format.
+# [ml2_mech_cisco_nexus:<IP address of switch>]
+# <hostname>=<intf_type:port> (1)
+# ssh_port=<ssh port> (2)
+# username=<credential username> (3)
+# password=<credential password> (4)
+#
+# (1) For each host connected to a port on the switch, specify the hostname
+# and the Nexus physical port (interface) it is connected to.
+# Valid intf_type's are 'ethernet' and 'port-channel'.
+# The default setting for <intf_type:> is 'ethernet' and need not be
+# added to this setting.
+# (2) The TCP port for connecting via SSH to manage the switch. This is
+# port number 22 unless the switch has been configured otherwise.
+# (3) The username for logging into the switch to manage it.
+# (4) The password for logging into the switch to manage it.
+#
+# Example:
+# [ml2_mech_cisco_nexus:1.1.1.1]
+# compute1=1/1
+# compute2=ethernet:1/2
+# compute3=port-channel:1
+# ssh_port=22
+# username=admin
+# password=mySecretPassword
+
+[ml2_cisco_apic]
+
+# Hostname:port list of APIC controllers
+# apic_hosts = 1.1.1.1:80, 1.1.1.2:8080, 1.1.1.3:80
+
+# Username for the APIC controller
+# apic_username = user
+
+# Password for the APIC controller
+# apic_password = password
+
+# Whether use SSl for connecting to the APIC controller or not
+# apic_use_ssl = True
+
+# How to map names to APIC: use_uuid or use_name
+# apic_name_mapping = use_name
+
+# Names for APIC objects used by Neutron
+# Note: When deploying multiple clouds against one APIC,
+# these names must be unique between the clouds.
+# apic_vmm_domain = openstack
+# apic_vlan_ns_name = openstack_ns
+# apic_node_profile = openstack_profile
+# apic_entity_profile = openstack_entity
+# apic_function_profile = openstack_function
+# apic_app_profile_name = openstack_app
+# Agent timers for State reporting and topology discovery
+# apic_sync_interval = 30
+# apic_agent_report_interval = 30
+# apic_agent_poll_interval = 2
+
+# Specify your network topology.
+# This section indicates how your compute nodes are connected to the fabric's
+# switches and ports. The format is as follows:
+#
+# [apic_switch:<swich_id_from_the_apic>]
+# <compute_host>,<compute_host> = <switchport_the_host(s)_are_connected_to>
+#
+# You can have multiple sections, one for each switch in your fabric that is
+# participating in Openstack. e.g.
+#
+# [apic_switch:17]
+# ubuntu,ubuntu1 = 1/10
+# ubuntu2,ubuntu3 = 1/11
+#
+# [apic_switch:18]
+# ubuntu5,ubuntu6 = 1/1
+# ubuntu7,ubuntu8 = 1/2
+
+# Describe external connectivity.
+# In this section you can specify the external network configuration in order
+# for the plugin to be able to teach the fabric how to route the internal
+# traffic to the outside world. The external connectivity configuration
+# format is as follows:
+#
+# [apic_external_network:<externalNetworkName>]
+# switch = <switch_id_from_the_apic>
+# port = <switchport_the_external_router_is_connected_to>
+# encap = <encapsulation>
+# cidr_exposed = <cidr_exposed_to_the_external_router>
+# gateway_ip = <ip_of_the_external_gateway>
+#
+# An example follows:
+# [apic_external_network:network_ext]
+# switch=203
+# port=1/34
+# encap=vlan-100
+# cidr_exposed=10.10.40.2/16
+# gateway_ip=10.10.40.1
diff --git a/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_fslsdn.ini b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_fslsdn.ini
new file mode 100644
index 00000000..6ee4a4e0
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_fslsdn.ini
@@ -0,0 +1,52 @@
+# Defines Configuration options for FSL SDN OS Mechanism Driver
+# Cloud Resource Discovery (CRD) authorization credentials
+[ml2_fslsdn]
+#(StrOpt) User name for authentication to CRD.
+# e.g.: user12
+#
+# crd_user_name =
+
+#(StrOpt) Password for authentication to CRD.
+# e.g.: secret
+#
+# crd_password =
+
+#(StrOpt) Tenant name for CRD service.
+# e.g.: service
+#
+# crd_tenant_name =
+
+#(StrOpt) CRD auth URL.
+# e.g.: http://127.0.0.1:5000/v2.0/
+#
+# crd_auth_url =
+
+#(StrOpt) URL for connecting to CRD Service.
+# e.g.: http://127.0.0.1:9797
+#
+# crd_url=
+
+#(IntOpt) Timeout value for connecting to CRD service
+# in seconds, e.g.: 30
+#
+# crd_url_timeout=
+
+#(StrOpt) Region name for connecting to CRD in
+# admin context, e.g.: RegionOne
+#
+# crd_region_name=
+
+#(BoolOpt)If set, ignore any SSL validation issues (boolean value)
+# e.g.: False
+#
+# crd_api_insecure=
+
+#(StrOpt)Authorization strategy for connecting to CRD in admin
+# context, e.g.: keystone
+#
+# crd_auth_strategy=
+
+#(StrOpt)Location of CA certificates file to use for CRD client
+# requests.
+#
+# crd_ca_certificates_file=
diff --git a/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_mlnx.ini b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_mlnx.ini
new file mode 100644
index 00000000..46139aed
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_mlnx.ini
@@ -0,0 +1,4 @@
+[eswitch]
+# (StrOpt) Type of Network Interface to allocate for VM:
+# mlnx_direct or hostdev according to libvirt terminology
+# vnic_type = mlnx_direct
diff --git a/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_ncs.ini b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_ncs.ini
new file mode 100644
index 00000000..dbbfcbd2
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_ncs.ini
@@ -0,0 +1,28 @@
+# Defines configuration options specific to the Tail-f NCS Mechanism Driver
+
+[ml2_ncs]
+# (StrOpt) Tail-f NCS HTTP endpoint for REST access to the OpenStack
+# subtree.
+# If this is not set then no HTTP requests will be made.
+#
+# url =
+# Example: url = http://ncs/api/running/services/openstack
+
+# (StrOpt) Username for HTTP basic authentication to NCS.
+# This is an optional parameter. If unspecified then no authentication is used.
+#
+# username =
+# Example: username = admin
+
+# (StrOpt) Password for HTTP basic authentication to NCS.
+# This is an optional parameter. If unspecified then no authentication is used.
+#
+# password =
+# Example: password = admin
+
+# (IntOpt) Timeout in seconds to wait for NCS HTTP request completion.
+# This is an optional parameter, default value is 10 seconds.
+#
+# timeout =
+# Example: timeout = 15
+
diff --git a/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_odl.ini b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_odl.ini
new file mode 100644
index 00000000..9e88c1bb
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_odl.ini
@@ -0,0 +1,30 @@
+# Configuration for the OpenDaylight MechanismDriver
+
+[ml2_odl]
+# (StrOpt) OpenDaylight REST URL
+# If this is not set then no HTTP requests will be made.
+#
+# url =
+# Example: url = http://192.168.56.1:8080/controller/nb/v2/neutron
+
+# (StrOpt) Username for HTTP basic authentication to ODL.
+#
+# username =
+# Example: username = admin
+
+# (StrOpt) Password for HTTP basic authentication to ODL.
+#
+# password =
+# Example: password = admin
+
+# (IntOpt) Timeout in seconds to wait for ODL HTTP request completion.
+# This is an optional parameter, default value is 10 seconds.
+#
+# timeout = 10
+# Example: timeout = 15
+
+# (IntOpt) Timeout in minutes to wait for a Tomcat session timeout.
+# This is an optional parameter, default value is 30 minutes.
+#
+# session_timeout = 30
+# Example: session_timeout = 60
diff --git a/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_ofa.ini b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_ofa.ini
new file mode 100644
index 00000000..4a94b987
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_ofa.ini
@@ -0,0 +1,13 @@
+# Defines configuration options specific to the OpenFlow Agent Mechanism Driver
+
+[ovs]
+# Please refer to configuration options to the OpenvSwitch
+
+[agent]
+# (IntOpt) Number of seconds to retry acquiring an Open vSwitch datapath.
+# This is an optional parameter, default value is 60 seconds.
+#
+# get_datapath_retry_times =
+# Example: get_datapath_retry_times = 30
+
+# Please refer to configuration options to the OpenvSwitch else the above.
diff --git a/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_sriov.ini b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_sriov.ini
new file mode 100644
index 00000000..9566f54c
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_sriov.ini
@@ -0,0 +1,31 @@
+# Defines configuration options for SRIOV NIC Switch MechanismDriver
+# and Agent
+
+[ml2_sriov]
+# (ListOpt) Comma-separated list of
+# supported Vendor PCI Devices, in format vendor_id:product_id
+#
+# supported_pci_vendor_devs = 15b3:1004, 8086:10c9
+# Example: supported_pci_vendor_devs = 15b3:1004
+#
+# (BoolOpt) Requires running SRIOV neutron agent for port binding
+# agent_required = True
+
+[sriov_nic]
+# (ListOpt) Comma-separated list of <physical_network>:<network_device>
+# tuples mapping physical network names to the agent's node-specific
+# physical network device interfaces of SR-IOV physical function to be used
+# for VLAN networks. All physical networks listed in network_vlan_ranges on
+# the server should have mappings to appropriate interfaces on each agent.
+#
+# physical_device_mappings =
+# Example: physical_device_mappings = physnet1:eth1
+#
+# (ListOpt) Comma-separated list of <network_device>:<vfs__to_exclude>
+# tuples, mapping network_device to the agent's node-specific list of virtual
+# functions that should not be used for virtual networking.
+# vfs_to_exclude is a semicolon-separated list of virtual
+# functions to exclude from network_device. The network_device in the
+# mapping should appear in the physical_device_mappings list.
+# exclude_devices =
+# Example: exclude_devices = eth1:0000:07:00.2; 0000:07:00.3
diff --git a/openstack/usr/share/openstack/neutron/plugins/mlnx/mlnx_conf.ini b/openstack/usr/share/openstack/neutron/plugins/mlnx/mlnx_conf.ini
new file mode 100644
index 00000000..b1225111
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/mlnx/mlnx_conf.ini
@@ -0,0 +1,79 @@
+[mlnx]
+# (StrOpt) Type of network to allocate for tenant networks. The
+# default value is 'vlan' You MUST configure network_vlan_ranges below
+# in order for tenant networks to provide connectivity between hosts.
+# Set to 'none' to disable creation of tenant networks.
+#
+# tenant_network_type = vlan
+# Example: tenant_network_type = vlan
+
+# (ListOpt) Comma-separated list of
+# <physical_network>[:<vlan_min>:<vlan_max>] tuples enumerating ranges
+# of VLAN IDs on named physical networks that are available for
+# allocation. All physical networks listed are available for flat and
+# VLAN provider network creation. Specified ranges of VLAN IDs are
+# available for tenant network allocation if tenant_network_type is
+# 'vlan'. If empty, only local networks may be created.
+#
+# network_vlan_ranges =
+# Example: network_vlan_ranges = default:1:100
+
+# (ListOpt) Comma-separated list of
+# <physical_network>:<physical_network_type> tuples mapping physical
+# network names to physical network types. All physical
+# networks listed in network_vlan_ranges should have
+# mappings to appropriate physical network type.
+# Type of the physical network can be either eth (Ethernet) or
+# ib (InfiniBand). If empty, physical network eth type is assumed.
+#
+# physical_network_type_mappings =
+# Example: physical_network_type_mappings = default:eth
+
+# (StrOpt) Type of the physical network, can be either 'eth' or 'ib'
+# The default value is 'eth'
+# physical_network_type = eth
+
+[eswitch]
+# (ListOpt) Comma-separated list of
+# <physical_network>:<physical_interface> tuples mapping physical
+# network names to the agent's node-specific physical network
+# interfaces to be used for flat and VLAN networks. All physical
+# networks listed in network_vlan_ranges on the server should have
+# mappings to appropriate interfaces on each agent.
+#
+# physical_interface_mappings =
+# Example: physical_interface_mappings = default:eth2
+
+# (StrOpt) Type of Network Interface to allocate for VM:
+# direct or hosdev according to libvirt terminology
+# vnic_type = mlnx_direct
+
+# (StrOpt) Eswitch daemon end point connection url
+# daemon_endpoint = 'tcp://127.0.0.1:60001'
+
+# The number of milliseconds the agent will wait for
+# response on request to daemon
+# request_timeout = 3000
+
+# The number of retries the agent will send request
+# to daemon before giving up
+# retries = 3
+
+# The backoff rate multiplier for waiting period between retries
+# on request to daemon, i.e. value of 2 will double
+# the request timeout each retry
+# backoff_rate = 2
+
+[agent]
+# Agent's polling interval in seconds
+# polling_interval = 2
+
+# (BoolOpt) Enable server RPC compatibility with old (pre-havana)
+# agents.
+#
+# rpc_support_old_agents = False
+
+[securitygroup]
+# Controls if neutron security group is enabled or not.
+# It should be false when you use nova security group.
+# enable_security_group = True
diff --git a/openstack/usr/share/openstack/neutron/plugins/nec/nec.ini b/openstack/usr/share/openstack/neutron/plugins/nec/nec.ini
new file mode 100644
index 00000000..aa4171da
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/nec/nec.ini
@@ -0,0 +1,60 @@
+# Sample Configurations
+
+[ovs]
+# Do not change this parameter unless you have a good reason to.
+# This is the name of the OVS integration bridge. There is one per hypervisor.
+# The integration bridge acts as a virtual "patch port". All VM VIFs are
+# attached to this bridge and then "patched" according to their network
+# connectivity.
+# integration_bridge = br-int
+
+[agent]
+# Agent's polling interval in seconds
+# polling_interval = 2
+
+[securitygroup]
+# Firewall driver for realizing neutron security group function
+firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
+
+# Controls if neutron security group is enabled or not.
+# It should be false when you use nova security group.
+# enable_security_group = True
+
+[ofc]
+# Specify OpenFlow Controller Host, Port and Driver to connect.
+# host = 127.0.0.1
+# port = 8888
+
+# Base URL of OpenFlow Controller REST API.
+# It is prepended to a path of each API request.
+# path_prefix =
+
+# Drivers are in neutron/plugins/nec/drivers/ .
+# driver = trema
+
+# PacketFilter is available when it's enabled in this configuration
+# and supported by the driver.
+# enable_packet_filter = true
+
+# Use SSL to connect
+# use_ssl = false
+
+# Key file
+# key_file =
+
+# Certificate file
+# cert_file =
+
+# Disable SSL certificate verification
+# insecure_ssl = false
+
+# Maximum attempts per OFC API request. NEC plugin retries
+# API request to OFC when OFC returns ServiceUnavailable (503).
+# The value must be greater than 0.
+# api_max_attempts = 3
+
+[provider]
+# Default router provider to use.
+# default_router_provider = l3-agent
+# List of enabled router providers.
+# router_providers = l3-agent,openflow
diff --git a/openstack/usr/share/openstack/neutron/plugins/nuage/nuage_plugin.ini b/openstack/usr/share/openstack/neutron/plugins/nuage/nuage_plugin.ini
new file mode 100644
index 00000000..aad37bd5
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/nuage/nuage_plugin.ini
@@ -0,0 +1,41 @@
+# Please fill in the correct data for all the keys below and uncomment key-value pairs
+[restproxy]
+# (StrOpt) Default Network partition in which VSD will
+# orchestrate network resources using openstack
+#
+#default_net_partition_name = <default-net-partition-name>
+
+# (StrOpt) Nuage provided uri for initial authorization to
+# access VSD
+#
+#auth_resource = /auth
+
+# (StrOpt) IP Address and Port of VSD
+#
+#server = ip:port
+
+# (StrOpt) Organization name in which VSD will orchestrate
+# network resources using openstack
+#
+#organization = org
+
+# (StrOpt) Username and password of VSD for authentication
+#
+#serverauth = uname:pass
+
+# (BoolOpt) Boolean for SSL connection with VSD server
+#
+#serverssl = True
+
+# (StrOpt) Nuage provided base uri to reach out to VSD
+#
+#base_uri = /base
+
+[syncmanager]
+# (BoolOpt) Boolean to enable sync between openstack and VSD
+#
+#enable_sync = False
+
+# (IntOpt) Sync interval in seconds between openstack and VSD
+#
+#sync_interval = 0 \ No newline at end of file
diff --git a/openstack/usr/share/openstack/neutron/plugins/oneconvergence/nvsdplugin.ini b/openstack/usr/share/openstack/neutron/plugins/oneconvergence/nvsdplugin.ini
new file mode 100644
index 00000000..a1c05d97
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/oneconvergence/nvsdplugin.ini
@@ -0,0 +1,35 @@
+[nvsd]
+# Configure the NVSD controller. The plugin proxies the api calls using
+# to NVSD controller which implements the required functionality.
+
+# IP address of NVSD controller api server
+# nvsd_ip = <ip address of nvsd controller>
+
+# Port number of NVSD controller api server
+# nvsd_port = 8082
+
+# Authentication credentials to access the api server
+# nvsd_user = <nvsd controller username>
+# nvsd_passwd = <password>
+
+# API request timeout in seconds
+# request_timeout = <default request timeout>
+
+# Maximum number of retry attempts to login to the NVSD controller
+# Specify 0 to retry until success (default)
+# nvsd_retries = 0
+
+[securitygroup]
+# Specify firewall_driver option, if neutron security groups are disabled,
+# then NoopFirewallDriver otherwise OVSHybridIptablesFirewallDriver.
+# firewall_driver = neutron.agent.firewall.NoopFirewallDriver
+
+# Controls if neutron security group is enabled or not.
+# It should be false when you use nova security group.
+# enable_security_group = True
+
+[agent]
+# root_helper = sudo /usr/local/bin/neutron-rootwrap /etc/neutron/rootwrap.conf
+
+[database]
+# connection = mysql://root:<passwd>@127.0.0.1/<neutron_db>?charset=utf8
diff --git a/openstack/usr/share/openstack/neutron/plugins/opencontrail/contrailplugin.ini b/openstack/usr/share/openstack/neutron/plugins/opencontrail/contrailplugin.ini
new file mode 100644
index 00000000..629f1fc4
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/opencontrail/contrailplugin.ini
@@ -0,0 +1,26 @@
+# OpenContrail is an Apache 2.0-licensed project that is built using
+# standards-based protocols and provides all the necessary components for
+# network virtualization–SDN controller, virtual router, analytics engine,
+# and published northbound APIs
+# For more information visit: http://opencontrail.org
+
+# Opencontrail plugin specific configuration
+[CONTRAIL]
+# (StrOpt) IP address to connect to opencontrail controller.
+# Uncomment this line for specifying the IP address of the opencontrail
+# Api-Server.
+# Default value is local host(127.0.0.1).
+# api_server_ip='127.0.0.1'
+
+# (IntOpt) port to connect to opencontrail controller.
+# Uncomment this line for the specifying the Port of the opencontrail
+# Api-Server.
+# Default value is 8082
+# api_server_port=8082
+
+# (DictOpt) enable opencontrail extensions
+# Opencontrail in future would support extension such as ipam, policy,
+# these extensions can be configured as shown below. Plugin will then
+# load the specified extensions.
+# Default value is None, it wont load any extension
+# contrail_extensions=ipam:<classpath>,policy:<classpath>
diff --git a/openstack/usr/share/openstack/neutron/plugins/openvswitch/ovs_neutron_plugin.ini b/openstack/usr/share/openstack/neutron/plugins/openvswitch/ovs_neutron_plugin.ini
new file mode 100644
index 00000000..9c8e6b58
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/openvswitch/ovs_neutron_plugin.ini
@@ -0,0 +1,190 @@
+[ovs]
+# (StrOpt) Type of network to allocate for tenant networks. The
+# default value 'local' is useful only for single-box testing and
+# provides no connectivity between hosts. You MUST either change this
+# to 'vlan' and configure network_vlan_ranges below or change this to
+# 'gre' or 'vxlan' and configure tunnel_id_ranges below in order for
+# tenant networks to provide connectivity between hosts. Set to 'none'
+# to disable creation of tenant networks.
+#
+# tenant_network_type = local
+# Example: tenant_network_type = gre
+# Example: tenant_network_type = vxlan
+
+# (ListOpt) Comma-separated list of
+# <physical_network>[:<vlan_min>:<vlan_max>] tuples enumerating ranges
+# of VLAN IDs on named physical networks that are available for
+# allocation. All physical networks listed are available for flat and
+# VLAN provider network creation. Specified ranges of VLAN IDs are
+# available for tenant network allocation if tenant_network_type is
+# 'vlan'. If empty, only gre, vxlan and local networks may be created.
+#
+# network_vlan_ranges =
+# Example: network_vlan_ranges = physnet1:1000:2999
+
+# (BoolOpt) Set to True in the server and the agents to enable support
+# for GRE or VXLAN networks. Requires kernel support for OVS patch ports and
+# GRE or VXLAN tunneling.
+#
+# WARNING: This option will be deprecated in the Icehouse release, at which
+# point setting tunnel_type below will be required to enable
+# tunneling.
+#
+# enable_tunneling = False
+
+# (StrOpt) The type of tunnel network, if any, supported by the plugin. If
+# this is set, it will cause tunneling to be enabled. If this is not set and
+# the option enable_tunneling is set, this will default to 'gre'.
+#
+# tunnel_type =
+# Example: tunnel_type = gre
+# Example: tunnel_type = vxlan
+
+# (ListOpt) Comma-separated list of <tun_min>:<tun_max> tuples
+# enumerating ranges of GRE or VXLAN tunnel IDs that are available for
+# tenant network allocation if tenant_network_type is 'gre' or 'vxlan'.
+#
+# tunnel_id_ranges =
+# Example: tunnel_id_ranges = 1:1000
+
+# Do not change this parameter unless you have a good reason to.
+# This is the name of the OVS integration bridge. There is one per hypervisor.
+# The integration bridge acts as a virtual "patch bay". All VM VIFs are
+# attached to this bridge and then "patched" according to their network
+# connectivity.
+#
+# integration_bridge = br-int
+
+# Only used for the agent if tunnel_id_ranges (above) is not empty for
+# the server. In most cases, the default value should be fine.
+#
+# tunnel_bridge = br-tun
+
+# Peer patch port in integration bridge for tunnel bridge
+# int_peer_patch_port = patch-tun
+
+# Peer patch port in tunnel bridge for integration bridge
+# tun_peer_patch_port = patch-int
+
+# Uncomment this line for the agent if tunnel_id_ranges (above) is not
+# empty for the server. Set local-ip to be the local IP address of
+# this hypervisor.
+#
+# local_ip =
+
+# (ListOpt) Comma-separated list of <physical_network>:<bridge> tuples
+# mapping physical network names to the agent's node-specific OVS
+# bridge names to be used for flat and VLAN networks. The length of
+# bridge names should be no more than 11. Each bridge must
+# exist, and should have a physical network interface configured as a
+# port. All physical networks listed in network_vlan_ranges on the
+# server should have mappings to appropriate bridges on each agent.
+#
+# bridge_mappings =
+# Example: bridge_mappings = physnet1:br-eth1
+
+# (BoolOpt) Use veths instead of patch ports to interconnect the integration
+# bridge to physical networks. Support kernel without ovs patch port support
+# so long as it is set to True.
+# use_veth_interconnection = False
+
+[agent]
+# Agent's polling interval in seconds
+# polling_interval = 2
+
+# Minimize polling by monitoring ovsdb for interface changes
+# minimize_polling = True
+
+# When minimize_polling = True, the number of seconds to wait before
+# respawning the ovsdb monitor after losing communication with it
+# ovsdb_monitor_respawn_interval = 30
+
+# (ListOpt) The types of tenant network tunnels supported by the agent.
+# Setting this will enable tunneling support in the agent. This can be set to
+# either 'gre' or 'vxlan'. If this is unset, it will default to [] and
+# disable tunneling support in the agent. When running the agent with the OVS
+# plugin, this value must be the same as "tunnel_type" in the "[ovs]" section.
+# When running the agent with ML2, you can specify as many values here as
+# your compute hosts supports.
+#
+# tunnel_types =
+# Example: tunnel_types = gre
+# Example: tunnel_types = vxlan
+# Example: tunnel_types = vxlan, gre
+
+# (IntOpt) The port number to utilize if tunnel_types includes 'vxlan'. By
+# default, this will make use of the Open vSwitch default value of '4789' if
+# not specified.
+#
+# vxlan_udp_port =
+# Example: vxlan_udp_port = 8472
+
+# (IntOpt) This is the MTU size of veth interfaces.
+# Do not change unless you have a good reason to.
+# The default MTU size of veth interfaces is 1500.
+# This option has no effect if use_veth_interconnection is False
+# veth_mtu =
+# Example: veth_mtu = 1504
+
+# (BoolOpt) Flag to enable l2-population extension. This option should only be
+# used in conjunction with ml2 plugin and l2population mechanism driver. It'll
+# enable plugin to populate remote ports macs and IPs (using fdb_add/remove
+# RPC calbbacks instead of tunnel_sync/update) on OVS agents in order to
+# optimize tunnel management.
+#
+# l2_population = False
+
+# Enable local ARP responder. Requires OVS 2.1. This is only used by the l2
+# population ML2 MechanismDriver.
+#
+# arp_responder = False
+
+# (BoolOpt) Set or un-set the don't fragment (DF) bit on outgoing IP packet
+# carrying GRE/VXLAN tunnel. The default value is True.
+#
+# dont_fragment = True
+
+# (BoolOpt) Set to True on L2 agents to enable support
+# for distributed virtual routing.
+#
+# enable_distributed_routing = False
+
+[securitygroup]
+# Firewall driver for realizing neutron security group function.
+# firewall_driver = neutron.agent.firewall.NoopFirewallDriver
+# Example: firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
+
+# Controls if neutron security group is enabled or not.
+# It should be false when you use nova security group.
+# enable_security_group = True
+
+#-----------------------------------------------------------------------------
+# Sample Configurations.
+#-----------------------------------------------------------------------------
+#
+# 1. With VLANs on eth1.
+# [ovs]
+# network_vlan_ranges = default:2000:3999
+# tunnel_id_ranges =
+# integration_bridge = br-int
+# bridge_mappings = default:br-eth1
+#
+# 2. With GRE tunneling.
+# [ovs]
+# network_vlan_ranges =
+# tunnel_id_ranges = 1:1000
+# integration_bridge = br-int
+# tunnel_bridge = br-tun
+# local_ip = 10.0.0.3
+#
+# 3. With VXLAN tunneling.
+# [ovs]
+# network_vlan_ranges =
+# tenant_network_type = vxlan
+# tunnel_type = vxlan
+# tunnel_id_ranges = 1:1000
+# integration_bridge = br-int
+# tunnel_bridge = br-tun
+# local_ip = 10.0.0.3
+# [agent]
+# tunnel_types = vxlan
diff --git a/openstack/usr/share/openstack/neutron/plugins/plumgrid/plumgrid.ini b/openstack/usr/share/openstack/neutron/plugins/plumgrid/plumgrid.ini
new file mode 100644
index 00000000..bfe8062a
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/plumgrid/plumgrid.ini
@@ -0,0 +1,14 @@
+# Config file for Neutron PLUMgrid Plugin
+
+[plumgriddirector]
+# This line should be pointing to the PLUMgrid Director,
+# for the PLUMgrid platform.
+# director_server=<director-ip-address>
+# director_server_port=<director-port>
+# Authentification parameters for the Director.
+# These are the admin credentials to manage and control
+# the PLUMgrid Director server.
+# username=<director-admin-username>
+# password=<director-admin-password>
+# servertimeout=5
+# driver=<plugin-driver>
diff --git a/openstack/usr/share/openstack/neutron/plugins/ryu/ryu.ini b/openstack/usr/share/openstack/neutron/plugins/ryu/ryu.ini
new file mode 100644
index 00000000..9d9cfa25
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/ryu/ryu.ini
@@ -0,0 +1,44 @@
+[ovs]
+# integration_bridge = br-int
+
+# openflow_rest_api = <host IP address of ofp rest api service>:<port: 8080>
+# openflow_rest_api = 127.0.0.1:8080
+
+# tunnel key range: 0 < tunnel_key_min < tunnel_key_max
+# VLAN: 12bits, GRE, VXLAN: 24bits
+# tunnel_key_min = 1
+# tunnel_key_max = 0xffffff
+
+# tunnel_ip = <ip address for tunneling>
+# tunnel_interface = interface for tunneling
+# when tunnel_ip is NOT specified, ip address is read
+# from this interface
+# tunnel_ip =
+# tunnel_interface =
+tunnel_interface = eth0
+
+# ovsdb_port = port number on which ovsdb is listening
+# ryu-agent uses this parameter to setup ovsdb.
+# ovs-vsctl set-manager ptcp:<ovsdb_port>
+# See set-manager section of man ovs-vsctl for details.
+# currently ptcp is only supported.
+# ovsdb_ip = <host IP address on which ovsdb is listening>
+# ovsdb_interface = interface for ovsdb
+# when ovsdb_addr NOT specifiied, ip address is gotten
+# from this interface
+# ovsdb_port = 6634
+# ovsdb_ip =
+# ovsdb_interface =
+ovsdb_interface = eth0
+
+[securitygroup]
+# Firewall driver for realizing neutron security group function
+# firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
+
+# Controls if neutron security group is enabled or not.
+# It should be false when you use nova security group.
+# enable_security_group = True
+
+[agent]
+# Agent's polling interval in seconds
+# polling_interval = 2
diff --git a/openstack/usr/share/openstack/neutron/plugins/vmware/nsx.ini b/openstack/usr/share/openstack/neutron/plugins/vmware/nsx.ini
new file mode 100644
index 00000000..baca73b8
--- /dev/null
+++ b/openstack/usr/share/openstack/neutron/plugins/vmware/nsx.ini
@@ -0,0 +1,200 @@
+[DEFAULT]
+# User name for NSX controller
+# nsx_user = admin
+
+# Password for NSX controller
+# nsx_password = admin
+
+# Time before aborting a request on an unresponsive controller (Seconds)
+# http_timeout = 75
+
+# Maximum number of times a particular request should be retried
+# retries = 2
+
+# Maximum number of times a redirect response should be followed
+# redirects = 2
+
+# Comma-separated list of NSX controller endpoints (<ip>:<port>). When port
+# is omitted, 443 is assumed. This option MUST be specified, e.g.:
+# nsx_controllers = xx.yy.zz.ww:443, aa.bb.cc.dd, ee.ff.gg.hh.ee:80
+
+# UUID of the pre-existing default NSX Transport zone to be used for creating
+# tunneled isolated "Neutron" networks. This option MUST be specified, e.g.:
+# default_tz_uuid = 1e8e52cf-fa7f-46b0-a14a-f99835a9cb53
+
+# (Optional) UUID for the default l3 gateway service to use with this cluster.
+# To be specified if planning to use logical routers with external gateways.
+# default_l3_gw_service_uuid =
+
+# (Optional) UUID for the default l2 gateway service to use with this cluster.
+# To be specified for providing a predefined gateway tenant for connecting their networks.
+# default_l2_gw_service_uuid =
+
+# (Optional) UUID for the default service cluster. A service cluster is introduced to
+# represent a group of gateways and it is needed in order to use Logical Services like
+# dhcp and metadata in the logical space. NOTE: If agent_mode is set to 'agentless' this
+# config parameter *MUST BE* set to a valid pre-existent service cluster uuid.
+# default_service_cluster_uuid =
+
+# Name of the default interface name to be used on network-gateway. This value
+# will be used for any device associated with a network gateway for which an
+# interface name was not specified
+# default_interface_name = breth0
+
+[quotas]
+# number of network gateways allowed per tenant, -1 means unlimited
+# quota_network_gateway = 5
+
+[vcns]
+# URL for VCNS manager
+# manager_uri = https://management_ip
+
+# User name for VCNS manager
+# user = admin
+
+# Password for VCNS manager
+# password = default
+
+# (Optional) Datacenter ID for Edge deployment
+# datacenter_moid =
+
+# (Optional) Deployment Container ID for NSX Edge deployment
+# If not specified, either a default global container will be used, or
+# the resource pool and datastore specified below will be used
+# deployment_container_id =
+
+# (Optional) Resource pool ID for NSX Edge deployment
+# resource_pool_id =
+
+# (Optional) Datastore ID for NSX Edge deployment
+# datastore_id =
+
+# (Required) UUID of logic switch for physical network connectivity
+# external_network =
+
+# (Optional) Asynchronous task status check interval
+# default is 2000 (millisecond)
+# task_status_check_interval = 2000
+
+[nsx]
+# Maximum number of ports for each bridged logical switch
+# The recommended value for this parameter varies with NSX version
+# Please use:
+# NSX 2.x -> 64
+# NSX 3.0, 3.1 -> 5000
+# NSX 3.2 -> 10000
+# max_lp_per_bridged_ls = 5000
+
+# Maximum number of ports for each overlay (stt, gre) logical switch
+# max_lp_per_overlay_ls = 256
+
+# Number of connections to each controller node.
+# default is 10
+# concurrent_connections = 10
+
+# Number of seconds a generation id should be valid for (default -1 meaning do not time out)
+# nsx_gen_timeout = -1
+
+# Acceptable values for 'metadata_mode' are:
+# - 'access_network': this enables a dedicated connection to the metadata
+# proxy for metadata server access via Neutron router.
+# - 'dhcp_host_route': this enables host route injection via the dhcp agent.
+# This option is only useful if running on a host that does not support
+# namespaces otherwise access_network should be used.
+# metadata_mode = access_network
+
+# The default network transport type to use (stt, gre, bridge, ipsec_gre, or ipsec_stt)
+# default_transport_type = stt
+
+# Specifies in which mode the plugin needs to operate in order to provide DHCP and
+# metadata proxy services to tenant instances. If 'agent' is chosen (default)
+# the NSX plugin relies on external RPC agents (i.e. dhcp and metadata agents) to
+# provide such services. In this mode, the plugin supports API extensions 'agent'
+# and 'dhcp_agent_scheduler'. If 'agentless' is chosen (experimental in Icehouse),
+# the plugin will use NSX logical services for DHCP and metadata proxy. This
+# simplifies the deployment model for Neutron, in that the plugin no longer requires
+# the RPC agents to operate. When 'agentless' is chosen, the config option metadata_mode
+# becomes ineffective. The 'agentless' mode is supported from NSX 4.2 or above.
+# Furthermore, a 'combined' mode is also provided and is used to support existing
+# deployments that want to adopt the agentless mode going forward. With this mode,
+# existing networks keep being served by the existing infrastructure (thus preserving
+# backward compatibility, whereas new networks will be served by the new infrastructure.
+# Migration tools are provided to 'move' one network from one model to another; with
+# agent_mode set to 'combined', option 'network_auto_schedule' in neutron.conf is
+# ignored, as new networks will no longer be scheduled to existing dhcp agents.
+# agent_mode = agent
+
+# Specifies which mode packet replication should be done in. If set to service
+# a service node is required in order to perform packet replication. This can
+# also be set to source if one wants replication to be performed locally (NOTE:
+# usually only useful for testing if one does not want to deploy a service node).
+# In order to leverage distributed routers, replication_mode should be set to
+# "service".
+# replication_mode = service
+
+[nsx_sync]
+# Interval in seconds between runs of the status synchronization task.
+# The plugin will aim at resynchronizing operational status for all
+# resources in this interval, and it should be therefore large enough
+# to ensure the task is feasible. Otherwise the plugin will be
+# constantly synchronizing resource status, ie: a new task is started
+# as soon as the previous is completed.
+# If this value is set to 0, the state synchronization thread for this
+# Neutron instance will be disabled.
+# state_sync_interval = 10
+
+# Random additional delay between two runs of the state synchronization task.
+# An additional wait time between 0 and max_random_sync_delay seconds
+# will be added on top of state_sync_interval.
+# max_random_sync_delay = 0
+
+# Minimum delay, in seconds, between two status synchronization requests for NSX.
+# Depending on chunk size, controller load, and other factors, state
+# synchronization requests might be pretty heavy. This means the
+# controller might take time to respond, and its load might be quite
+# increased by them. This parameter allows to specify a minimum
+# interval between two subsequent requests.
+# The value for this parameter must never exceed state_sync_interval.
+# If this does, an error will be raised at startup.
+# min_sync_req_delay = 1
+
+# Minimum number of resources to be retrieved from NSX in a single status
+# synchronization request.
+# The actual size of the chunk will increase if the number of resources is such
+# that using the minimum chunk size will cause the interval between two
+# requests to be less than min_sync_req_delay
+# min_chunk_size = 500
+
+# Enable this option to allow punctual state synchronization on show
+# operations. In this way, show operations will always fetch the operational
+# status of the resource from the NSX backend, and this might have
+# a considerable impact on overall performance.
+# always_read_status = False
+
+[nsx_lsn]
+# Pull LSN information from NSX in case it is missing from the local
+# data store. This is useful to rebuild the local store in case of
+# server recovery
+# sync_on_missing_data = False
+
+[nsx_dhcp]
+# (Optional) Comma separated list of additional dns servers. Default is an empty list
+# extra_domain_name_servers =
+
+# Domain to use for building the hostnames
+# domain_name = openstacklocal
+
+# Default DHCP lease time
+# default_lease_time = 43200
+
+[nsx_metadata]
+# IP address used by Metadata server
+# metadata_server_address = 127.0.0.1
+
+# TCP Port used by Metadata server
+# metadata_server_port = 8775
+
+# When proxying metadata requests, Neutron signs the Instance-ID header with a
+# shared secret to prevent spoofing. You may select any string for a secret,
+# but it MUST match with the configuration used by the Metadata server
+# metadata_shared_secret =