diff options
Diffstat (limited to 'install-files/openstack/usr/share/openstack/neutron/plugins/ml2')
10 files changed, 35 insertions, 409 deletions
diff --git a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf.ini b/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf.ini index b8097ce2..ac9a3d0d 100644 --- a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf.ini +++ b/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf.ini @@ -4,7 +4,6 @@ # # type_drivers = local,flat,vlan,gre,vxlan # Example: type_drivers = flat,vlan,gre,vxlan -type_drivers = flat,gre # (ListOpt) Ordered list of network_types to allocate as tenant # networks. The default value 'local' is useful for single-box testing @@ -12,7 +11,6 @@ type_drivers = flat,gre # # tenant_network_types = local # Example: tenant_network_types = vlan,gre,vxlan -tenant_network_types = gre # (ListOpt) Ordered list of networking mechanism driver entrypoints # to be loaded from the neutron.ml2.mechanism_drivers namespace. @@ -22,13 +20,44 @@ tenant_network_types = gre # Example: mechanism_drivers = cisco,logger # Example: mechanism_drivers = openvswitch,brocade # Example: mechanism_drivers = linuxbridge,brocade -mechanism_drivers = openvswitch # (ListOpt) Ordered list of extension driver entrypoints # to be loaded from the neutron.ml2.extension_drivers namespace. # extension_drivers = # Example: extension_drivers = anewextensiondriver +# =========== items for MTU selection and advertisement ============= +# (IntOpt) Path MTU. The maximum permissible size of an unfragmented +# packet travelling from and to addresses where encapsulated Neutron +# traffic is sent. Drivers calculate maximum viable MTU for +# validating tenant requests based on this value (typically, +# path_mtu - max encap header size). If <=0, the path MTU is +# indeterminate and no calculation takes place. +# path_mtu = 0 + +# (IntOpt) Segment MTU. The maximum permissible size of an +# unfragmented packet travelling a L2 network segment. If <=0, +# the segment MTU is indeterminate and no calculation takes place. +# segment_mtu = 0 + +# (ListOpt) Physical network MTUs. List of mappings of physical +# network to MTU value. The format of the mapping is +# <physnet>:<mtu val>. This mapping allows specifying a +# physical network MTU value that differs from the default +# segment_mtu value. +# physical_network_mtus = +# Example: physical_network_mtus = physnet1:1550, physnet2:1500 +# ======== end of items for MTU selection and advertisement ========= + +# (StrOpt) Default network type for external networks when no provider +# attributes are specified. By default it is None, which means that if +# provider attributes are not specified while creating external networks +# then they will have the same type as tenant networks. +# Allowed values for external_network_type config option depend on the +# network type values configured in type_drivers config option. +# external_network_type = +# Example: external_network_type = local + [ml2_type_flat] # (ListOpt) List of physical_network names with which flat networks # can be created. Use * to allow flat networks with arbitrary @@ -37,7 +66,6 @@ mechanism_drivers = openvswitch # flat_networks = # Example:flat_networks = physnet1,physnet2 # Example:flat_networks = * -flat_networks = External [ml2_type_vlan] # (ListOpt) List of <physical_network>[:<vlan_min>:<vlan_max>] tuples @@ -47,11 +75,10 @@ flat_networks = External # # network_vlan_ranges = # Example: network_vlan_ranges = physnet1:1000:2999,physnet2 -#network_vlan_ranges = Physnet1:100:200 [ml2_type_gre] # (ListOpt) Comma-separated list of <tun_min>:<tun_max> tuples enumerating ranges of GRE tunnel IDs that are available for tenant network allocation -tunnel_id_ranges = 1:1000 +# tunnel_id_ranges = [ml2_type_vxlan] # (ListOpt) Comma-separated list of <vni_min>:<vni_max> tuples enumerating @@ -69,18 +96,8 @@ tunnel_id_ranges = 1:1000 [securitygroup] # Controls if neutron security group is enabled or not. # It should be false when you use nova security group. -enable_security_group = True +# enable_security_group = True # Use ipset to speed-up the iptables security groups. Enabling ipset support # requires that ipset is installed on L2 agent node. -enable_ipset = True - -firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver - -[ovs] -local_ip = {{ MANAGEMENT_INTERFACE_IP_ADDRESS }} -enable_tunneling = True -bridge_mappings=External:br-ex - -[agent] -tunnel_types = gre +# enable_ipset = True diff --git a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_arista.ini b/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_arista.ini deleted file mode 100644 index abaf5bc7..00000000 --- a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_arista.ini +++ /dev/null @@ -1,100 +0,0 @@ -# Defines configuration options specific for Arista ML2 Mechanism driver - -[ml2_arista] -# (StrOpt) EOS IP address. This is required field. If not set, all -# communications to Arista EOS will fail -# -# eapi_host = -# Example: eapi_host = 192.168.0.1 -# -# (StrOpt) EOS command API username. This is required field. -# if not set, all communications to Arista EOS will fail. -# -# eapi_username = -# Example: arista_eapi_username = admin -# -# (StrOpt) EOS command API password. This is required field. -# if not set, all communications to Arista EOS will fail. -# -# eapi_password = -# Example: eapi_password = my_password -# -# (StrOpt) Defines if hostnames are sent to Arista EOS as FQDNs -# ("node1.domain.com") or as short names ("node1"). This is -# optional. If not set, a value of "True" is assumed. -# -# use_fqdn = -# Example: use_fqdn = True -# -# (IntOpt) Sync interval in seconds between Neutron plugin and EOS. -# This field defines how often the synchronization is performed. -# This is an optional field. If not set, a value of 180 seconds -# is assumed. -# -# sync_interval = -# Example: sync_interval = 60 -# -# (StrOpt) Defines Region Name that is assigned to this OpenStack Controller. -# This is useful when multiple OpenStack/Neutron controllers are -# managing the same Arista HW clusters. Note that this name must -# match with the region name registered (or known) to keystone -# service. Authentication with Keysotne is performed by EOS. -# This is optional. If not set, a value of "RegionOne" is assumed. -# -# region_name = -# Example: region_name = RegionOne - - -[l3_arista] - -# (StrOpt) primary host IP address. This is required field. If not set, all -# communications to Arista EOS will fail. This is the host where -# primary router is created. -# -# primary_l3_host = -# Example: primary_l3_host = 192.168.10.10 -# -# (StrOpt) Primary host username. This is required field. -# if not set, all communications to Arista EOS will fail. -# -# primary_l3_host_username = -# Example: arista_primary_l3_username = admin -# -# (StrOpt) Primary host password. This is required field. -# if not set, all communications to Arista EOS will fail. -# -# primary_l3_host_password = -# Example: primary_l3_password = my_password -# -# (StrOpt) IP address of the second Arista switch paired as -# MLAG (Multi-chassis Link Aggregation) with the first. -# This is optional field, however, if mlag_config flag is set, -# then this is a required field. If not set, all -# communications to Arista EOS will fail. If mlag_config is set -# to False, then this field is ignored -# -# seconadary_l3_host = -# Example: seconadary_l3_host = 192.168.10.20 -# -# (BoolOpt) Defines if Arista switches are configured in MLAG mode -# If yes, all L3 configuration is pushed to both switches -# automatically. If this flag is set, ensure that secondary_l3_host -# is set to the second switch's IP. -# This flag is Optional. If not set, a value of "False" is assumed. -# -# mlag_config = -# Example: mlag_config = True -# -# (BoolOpt) Defines if the router is created in default VRF or a -# a specific VRF. This is optional. -# If not set, a value of "False" is assumed. -# -# Example: use_vrf = True -# -# (IntOpt) Sync interval in seconds between Neutron plugin and EOS. -# This field defines how often the synchronization is performed. -# This is an optional field. If not set, a value of 180 seconds -# is assumed. -# -# l3_sync_interval = -# Example: l3_sync_interval = 60 diff --git a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_brocade.ini b/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_brocade.ini deleted file mode 100644 index 67574110..00000000 --- a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_brocade.ini +++ /dev/null @@ -1,15 +0,0 @@ -[ml2_brocade] -# username = <mgmt admin username> -# password = <mgmt admin password> -# address = <switch mgmt ip address> -# ostype = NOS -# osversion = autodetect | n.n.n -# physical_networks = physnet1,physnet2 -# -# Example: -# username = admin -# password = password -# address = 10.24.84.38 -# ostype = NOS -# osversion = 4.1.1 -# physical_networks = physnet1,physnet2 diff --git a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_cisco.ini b/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_cisco.ini deleted file mode 100644 index 1b69100e..00000000 --- a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_cisco.ini +++ /dev/null @@ -1,118 +0,0 @@ -[ml2_cisco] - -# (StrOpt) A short prefix to prepend to the VLAN number when creating a -# VLAN interface. For example, if an interface is being created for -# VLAN 2001 it will be named 'q-2001' using the default prefix. -# -# vlan_name_prefix = q- -# Example: vlan_name_prefix = vnet- - -# (BoolOpt) A flag to enable round robin scheduling of routers for SVI. -# svi_round_robin = False - -# -# (StrOpt) The name of the physical_network managed via the Cisco Nexus Switch. -# This string value must be present in the ml2_conf.ini network_vlan_ranges -# variable. -# -# managed_physical_network = -# Example: managed_physical_network = physnet1 - -# Cisco Nexus Switch configurations. -# Each switch to be managed by Openstack Neutron must be configured here. -# -# Cisco Nexus Switch Format. -# [ml2_mech_cisco_nexus:<IP address of switch>] -# <hostname>=<intf_type:port> (1) -# ssh_port=<ssh port> (2) -# username=<credential username> (3) -# password=<credential password> (4) -# -# (1) For each host connected to a port on the switch, specify the hostname -# and the Nexus physical port (interface) it is connected to. -# Valid intf_type's are 'ethernet' and 'port-channel'. -# The default setting for <intf_type:> is 'ethernet' and need not be -# added to this setting. -# (2) The TCP port for connecting via SSH to manage the switch. This is -# port number 22 unless the switch has been configured otherwise. -# (3) The username for logging into the switch to manage it. -# (4) The password for logging into the switch to manage it. -# -# Example: -# [ml2_mech_cisco_nexus:1.1.1.1] -# compute1=1/1 -# compute2=ethernet:1/2 -# compute3=port-channel:1 -# ssh_port=22 -# username=admin -# password=mySecretPassword - -[ml2_cisco_apic] - -# Hostname:port list of APIC controllers -# apic_hosts = 1.1.1.1:80, 1.1.1.2:8080, 1.1.1.3:80 - -# Username for the APIC controller -# apic_username = user - -# Password for the APIC controller -# apic_password = password - -# Whether use SSl for connecting to the APIC controller or not -# apic_use_ssl = True - -# How to map names to APIC: use_uuid or use_name -# apic_name_mapping = use_name - -# Names for APIC objects used by Neutron -# Note: When deploying multiple clouds against one APIC, -# these names must be unique between the clouds. -# apic_vmm_domain = openstack -# apic_vlan_ns_name = openstack_ns -# apic_node_profile = openstack_profile -# apic_entity_profile = openstack_entity -# apic_function_profile = openstack_function -# apic_app_profile_name = openstack_app -# Agent timers for State reporting and topology discovery -# apic_sync_interval = 30 -# apic_agent_report_interval = 30 -# apic_agent_poll_interval = 2 - -# Specify your network topology. -# This section indicates how your compute nodes are connected to the fabric's -# switches and ports. The format is as follows: -# -# [apic_switch:<swich_id_from_the_apic>] -# <compute_host>,<compute_host> = <switchport_the_host(s)_are_connected_to> -# -# You can have multiple sections, one for each switch in your fabric that is -# participating in Openstack. e.g. -# -# [apic_switch:17] -# ubuntu,ubuntu1 = 1/10 -# ubuntu2,ubuntu3 = 1/11 -# -# [apic_switch:18] -# ubuntu5,ubuntu6 = 1/1 -# ubuntu7,ubuntu8 = 1/2 - -# Describe external connectivity. -# In this section you can specify the external network configuration in order -# for the plugin to be able to teach the fabric how to route the internal -# traffic to the outside world. The external connectivity configuration -# format is as follows: -# -# [apic_external_network:<externalNetworkName>] -# switch = <switch_id_from_the_apic> -# port = <switchport_the_external_router_is_connected_to> -# encap = <encapsulation> -# cidr_exposed = <cidr_exposed_to_the_external_router> -# gateway_ip = <ip_of_the_external_gateway> -# -# An example follows: -# [apic_external_network:network_ext] -# switch=203 -# port=1/34 -# encap=vlan-100 -# cidr_exposed=10.10.40.2/16 -# gateway_ip=10.10.40.1 diff --git a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_fslsdn.ini b/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_fslsdn.ini deleted file mode 100644 index 6ee4a4e0..00000000 --- a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_fslsdn.ini +++ /dev/null @@ -1,52 +0,0 @@ -# Defines Configuration options for FSL SDN OS Mechanism Driver -# Cloud Resource Discovery (CRD) authorization credentials -[ml2_fslsdn] -#(StrOpt) User name for authentication to CRD. -# e.g.: user12 -# -# crd_user_name = - -#(StrOpt) Password for authentication to CRD. -# e.g.: secret -# -# crd_password = - -#(StrOpt) Tenant name for CRD service. -# e.g.: service -# -# crd_tenant_name = - -#(StrOpt) CRD auth URL. -# e.g.: http://127.0.0.1:5000/v2.0/ -# -# crd_auth_url = - -#(StrOpt) URL for connecting to CRD Service. -# e.g.: http://127.0.0.1:9797 -# -# crd_url= - -#(IntOpt) Timeout value for connecting to CRD service -# in seconds, e.g.: 30 -# -# crd_url_timeout= - -#(StrOpt) Region name for connecting to CRD in -# admin context, e.g.: RegionOne -# -# crd_region_name= - -#(BoolOpt)If set, ignore any SSL validation issues (boolean value) -# e.g.: False -# -# crd_api_insecure= - -#(StrOpt)Authorization strategy for connecting to CRD in admin -# context, e.g.: keystone -# -# crd_auth_strategy= - -#(StrOpt)Location of CA certificates file to use for CRD client -# requests. -# -# crd_ca_certificates_file= diff --git a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_mlnx.ini b/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_mlnx.ini deleted file mode 100644 index 46139aed..00000000 --- a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_mlnx.ini +++ /dev/null @@ -1,4 +0,0 @@ -[eswitch] -# (StrOpt) Type of Network Interface to allocate for VM: -# mlnx_direct or hostdev according to libvirt terminology -# vnic_type = mlnx_direct diff --git a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_ncs.ini b/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_ncs.ini deleted file mode 100644 index dbbfcbd2..00000000 --- a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_ncs.ini +++ /dev/null @@ -1,28 +0,0 @@ -# Defines configuration options specific to the Tail-f NCS Mechanism Driver - -[ml2_ncs] -# (StrOpt) Tail-f NCS HTTP endpoint for REST access to the OpenStack -# subtree. -# If this is not set then no HTTP requests will be made. -# -# url = -# Example: url = http://ncs/api/running/services/openstack - -# (StrOpt) Username for HTTP basic authentication to NCS. -# This is an optional parameter. If unspecified then no authentication is used. -# -# username = -# Example: username = admin - -# (StrOpt) Password for HTTP basic authentication to NCS. -# This is an optional parameter. If unspecified then no authentication is used. -# -# password = -# Example: password = admin - -# (IntOpt) Timeout in seconds to wait for NCS HTTP request completion. -# This is an optional parameter, default value is 10 seconds. -# -# timeout = -# Example: timeout = 15 - diff --git a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_odl.ini b/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_odl.ini deleted file mode 100644 index 9e88c1bb..00000000 --- a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_odl.ini +++ /dev/null @@ -1,30 +0,0 @@ -# Configuration for the OpenDaylight MechanismDriver - -[ml2_odl] -# (StrOpt) OpenDaylight REST URL -# If this is not set then no HTTP requests will be made. -# -# url = -# Example: url = http://192.168.56.1:8080/controller/nb/v2/neutron - -# (StrOpt) Username for HTTP basic authentication to ODL. -# -# username = -# Example: username = admin - -# (StrOpt) Password for HTTP basic authentication to ODL. -# -# password = -# Example: password = admin - -# (IntOpt) Timeout in seconds to wait for ODL HTTP request completion. -# This is an optional parameter, default value is 10 seconds. -# -# timeout = 10 -# Example: timeout = 15 - -# (IntOpt) Timeout in minutes to wait for a Tomcat session timeout. -# This is an optional parameter, default value is 30 minutes. -# -# session_timeout = 30 -# Example: session_timeout = 60 diff --git a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_ofa.ini b/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_ofa.ini deleted file mode 100644 index 4a94b987..00000000 --- a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_ofa.ini +++ /dev/null @@ -1,13 +0,0 @@ -# Defines configuration options specific to the OpenFlow Agent Mechanism Driver - -[ovs] -# Please refer to configuration options to the OpenvSwitch - -[agent] -# (IntOpt) Number of seconds to retry acquiring an Open vSwitch datapath. -# This is an optional parameter, default value is 60 seconds. -# -# get_datapath_retry_times = -# Example: get_datapath_retry_times = 30 - -# Please refer to configuration options to the OpenvSwitch else the above. diff --git a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_sriov.ini b/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_sriov.ini deleted file mode 100644 index 9566f54c..00000000 --- a/install-files/openstack/usr/share/openstack/neutron/plugins/ml2/ml2_conf_sriov.ini +++ /dev/null @@ -1,31 +0,0 @@ -# Defines configuration options for SRIOV NIC Switch MechanismDriver -# and Agent - -[ml2_sriov] -# (ListOpt) Comma-separated list of -# supported Vendor PCI Devices, in format vendor_id:product_id -# -# supported_pci_vendor_devs = 15b3:1004, 8086:10c9 -# Example: supported_pci_vendor_devs = 15b3:1004 -# -# (BoolOpt) Requires running SRIOV neutron agent for port binding -# agent_required = True - -[sriov_nic] -# (ListOpt) Comma-separated list of <physical_network>:<network_device> -# tuples mapping physical network names to the agent's node-specific -# physical network device interfaces of SR-IOV physical function to be used -# for VLAN networks. All physical networks listed in network_vlan_ranges on -# the server should have mappings to appropriate interfaces on each agent. -# -# physical_device_mappings = -# Example: physical_device_mappings = physnet1:eth1 -# -# (ListOpt) Comma-separated list of <network_device>:<vfs__to_exclude> -# tuples, mapping network_device to the agent's node-specific list of virtual -# functions that should not be used for virtual networking. -# vfs_to_exclude is a semicolon-separated list of virtual -# functions to exclude from network_device. The network_device in the -# mapping should appear in the physical_device_mappings list. -# exclude_devices = -# Example: exclude_devices = eth1:0000:07:00.2; 0000:07:00.3 |