diff options
Diffstat (limited to 'install-files/openstack/usr/share/openstack/cinder/cinder.conf')
| -rw-r--r-- | install-files/openstack/usr/share/openstack/cinder/cinder.conf | 2991 |
1 files changed, 2991 insertions, 0 deletions
diff --git a/install-files/openstack/usr/share/openstack/cinder/cinder.conf b/install-files/openstack/usr/share/openstack/cinder/cinder.conf new file mode 100644 index 00000000..f3e4f11c --- /dev/null +++ b/install-files/openstack/usr/share/openstack/cinder/cinder.conf @@ -0,0 +1,2991 @@ +[DEFAULT] + +use_syslog = True + +# +# Options defined in oslo.messaging +# + +# ZeroMQ bind address. Should be a wildcard (*), an ethernet +# interface, or IP. The "host" option should point or resolve +# to this address. (string value) +#rpc_zmq_bind_address=* + +# MatchMaker driver. (string value) +#rpc_zmq_matchmaker=local + +# ZeroMQ receiver listening port. (integer value) +#rpc_zmq_port=9501 + +# Number of ZeroMQ contexts, defaults to 1. (integer value) +#rpc_zmq_contexts=1 + +# Maximum number of ingress messages to locally buffer per +# topic. Default is unlimited. (integer value) +#rpc_zmq_topic_backlog=<None> + +# Directory for holding IPC sockets. (string value) +#rpc_zmq_ipc_dir=/var/run/openstack + +# Name of this node. Must be a valid hostname, FQDN, or IP +# address. Must match "host" option, if running Nova. (string +# value) +#rpc_zmq_host=cinder + +# Seconds to wait before a cast expires (TTL). Only supported +# by impl_zmq. (integer value) +#rpc_cast_timeout=30 + +# Heartbeat frequency. (integer value) +#matchmaker_heartbeat_freq=300 + +# Heartbeat time-to-live. (integer value) +#matchmaker_heartbeat_ttl=600 + +# Size of RPC thread pool. (integer value) +#rpc_thread_pool_size=64 + +# Driver or drivers to handle sending notifications. (multi +# valued) +notification_driver=messagingv2 + +# AMQP topic used for OpenStack notifications. (list value) +# Deprecated group/name - [rpc_notifier2]/topics +#notification_topics=notifications + +# Seconds to wait for a response from a call. (integer value) +#rpc_response_timeout=60 + +# A URL representing the messaging driver to use and its full +# configuration. If not set, we fall back to the rpc_backend +# option and driver specific configuration. (string value) +#transport_url=<None> + +# The messaging driver to use, defaults to rabbit. Other +# drivers include qpid and zmq. (string value) +rpc_backend=rabbit + +# The default exchange under which topics are scoped. May be +# overridden by an exchange name specified in the +# transport_url option. (string value) +control_exchange=cinder + + +# +# Options defined in cinder.exception +# + +# Make exception message format errors fatal. (boolean value) +#fatal_exception_format_errors=false + + +# +# Options defined in cinder.quota +# + +# Number of volumes allowed per project (integer value) +#quota_volumes=10 + +# Number of volume snapshots allowed per project (integer +# value) +#quota_snapshots=10 + +# Number of consistencygroups allowed per project (integer +# value) +#quota_consistencygroups=10 + +# Total amount of storage, in gigabytes, allowed for volumes +# and snapshots per project (integer value) +#quota_gigabytes=1000 + +# Number of volume backups allowed per project (integer value) +#quota_backups=10 + +# Total amount of storage, in gigabytes, allowed for backups +# per project (integer value) +#quota_backup_gigabytes=1000 + +# Number of seconds until a reservation expires (integer +# value) +#reservation_expire=86400 + +# Count of reservations until usage is refreshed (integer +# value) +#until_refresh=0 + +# Number of seconds between subsequent usage refreshes +# (integer value) +#max_age=0 + +# Default driver to use for quota checks (string value) +#quota_driver=cinder.quota.DbQuotaDriver + +# Enables or disables use of default quota class with default +# quota. (boolean value) +#use_default_quota_class=true + + +# +# Options defined in cinder.service +# + +# Interval, in seconds, between nodes reporting state to +# datastore (integer value) +#report_interval=10 + +# Interval, in seconds, between running periodic tasks +# (integer value) +#periodic_interval=60 + +# Range, in seconds, to randomly delay when starting the +# periodic task scheduler to reduce stampeding. (Disable by +# setting to 0) (integer value) +#periodic_fuzzy_delay=60 + +# IP address on which OpenStack Volume API listens (string +# value) +#osapi_volume_listen=0.0.0.0 + +# Port on which OpenStack Volume API listens (integer value) +#osapi_volume_listen_port=8776 + +# Number of workers for OpenStack Volume API service. The +# default is equal to the number of CPUs available. (integer +# value) +#osapi_volume_workers=<None> + + +# +# Options defined in cinder.ssh_utils +# + +# Option to enable strict host key checking. When set to +# "True" Cinder will only connect to systems with a host key +# present in the configured "ssh_hosts_key_file". When set to +# "False" the host key will be saved upon first connection and +# used for subsequent connections. Default=False (boolean +# value) +#strict_ssh_host_key_policy=false + +# File containing SSH host keys for the systems with which +# Cinder needs to communicate. OPTIONAL: +# Default=$state_path/ssh_known_hosts (string value) +#ssh_hosts_key_file=$state_path/ssh_known_hosts + + +# +# Options defined in cinder.test +# + +# File name of clean sqlite db (string value) +#sqlite_clean_db=clean.sqlite + + +# +# Options defined in cinder.wsgi +# + +# Maximum line size of message headers to be accepted. +# max_header_line may need to be increased when using large +# tokens (typically those generated by the Keystone v3 API +# with big service catalogs). (integer value) +#max_header_line=16384 + +# Timeout for client connections' socket operations. If an +# incoming connection is idle for this number of seconds it +# will be closed. A value of '0' means wait forever. (integer +# value) +#client_socket_timeout=900 + +# If False, closes the client socket connection explicitly. +# Setting it to True to maintain backward compatibility. +# Recommended setting is set it to False. (boolean value) +#wsgi_keep_alive=true + +# Sets the value of TCP_KEEPALIVE (True/False) for each server +# socket. (boolean value) +#tcp_keepalive=true + +# Sets the value of TCP_KEEPIDLE in seconds for each server +# socket. Not supported on OS X. (integer value) +#tcp_keepidle=600 + +# Sets the value of TCP_KEEPINTVL in seconds for each server +# socket. Not supported on OS X. (integer value) +#tcp_keepalive_interval=<None> + +# Sets the value of TCP_KEEPCNT for each server socket. Not +# supported on OS X. (integer value) +#tcp_keepalive_count=<None> + +# CA certificate file to use to verify connecting clients +# (string value) +#ssl_ca_file=<None> + +# Certificate file to use when starting the server securely +# (string value) +#ssl_cert_file=<None> + +# Private key file to use when starting the server securely +# (string value) +#ssl_key_file=<None> + + +# +# Options defined in cinder.api.common +# + +# The maximum number of items that a collection resource +# returns in a single response (integer value) +#osapi_max_limit=1000 + +# Base URL that will be presented to users in links to the +# OpenStack Volume API (string value) +# Deprecated group/name - [DEFAULT]/osapi_compute_link_prefix +#osapi_volume_base_URL=<None> + + +# +# Options defined in cinder.api.middleware.auth +# + +# Treat X-Forwarded-For as the canonical remote address. Only +# enable this if you have a sanitizing proxy. (boolean value) +#use_forwarded_for=false + + +# +# Options defined in cinder.api.middleware.sizelimit +# + +# Max size for body of a request (integer value) +#osapi_max_request_body_size=114688 + + +# +# Options defined in cinder.api.views.versions +# + +# Public url to use for versions endpoint. The default is +# None, which will use the request's host_url attribute to +# populate the URL base. If Cinder is operating behind a +# proxy, you will want to change this to represent the proxy's +# URL. (string value) +#public_endpoint=<None> + + +# +# Options defined in cinder.backup.chunkeddriver +# + +# Compression algorithm (None to disable) (string value) +#backup_compression_algorithm=zlib + + +# +# Options defined in cinder.backup.driver +# + +# Backup metadata version to be used when backing up volume +# metadata. If this number is bumped, make sure the service +# doing the restore supports the new version. (integer value) +#backup_metadata_version=2 + +# The number of chunks or objects, for which one Ceilometer +# notification will be sent (integer value) +#backup_object_number_per_notification=10 + +# Interval, in seconds, between two progress notifications +# reporting the backup status (integer value) +#backup_timer_interval=120 + + +# +# Options defined in cinder.backup.drivers.ceph +# + +# Ceph configuration file to use. (string value) +#backup_ceph_conf=/etc/ceph/ceph.conf + +# The Ceph user to connect with. Default here is to use the +# same user as for Cinder volumes. If not using cephx this +# should be set to None. (string value) +#backup_ceph_user=cinder + +# The chunk size, in bytes, that a backup is broken into +# before transfer to the Ceph object store. (integer value) +#backup_ceph_chunk_size=134217728 + +# The Ceph pool where volume backups are stored. (string +# value) +#backup_ceph_pool=backups + +# RBD stripe unit to use when creating a backup image. +# (integer value) +#backup_ceph_stripe_unit=0 + +# RBD stripe count to use when creating a backup image. +# (integer value) +#backup_ceph_stripe_count=0 + +# If True, always discard excess bytes when restoring volumes +# i.e. pad with zeroes. (boolean value) +#restore_discard_excess_bytes=true + + +# +# Options defined in cinder.backup.drivers.nfs +# + +# The maximum size in bytes of the files used to hold backups. +# If the volume being backed up exceeds this size, then it +# will be backed up into multiple files. (integer value) +#backup_file_size=1999994880 + +# The size in bytes that changes are tracked for incremental +# backups. backup_swift_object_size has to be multiple of +# backup_swift_block_size. (integer value) +#backup_sha_block_size_bytes=32768 + +# Enable or Disable the timer to send the periodic progress +# notifications to Ceilometer when backing up the volume to +# the backend storage. The default value is True to enable the +# timer. (boolean value) +#backup_enable_progress_timer=true + +# Base dir containing mount point for NFS share. (string +# value) +#backup_mount_point_base=$state_path/backup_mount + +# NFS share in fqdn:path, ipv4addr:path, or "[ipv6addr]:path" +# format. (string value) +#backup_share=<None> + +# Mount options passed to the NFS client. See NFS man page for +# details. (string value) +#backup_mount_options=<None> + +# Custom container to use for backups. (string value) +#backup_container=<None> + + +# +# Options defined in cinder.backup.drivers.swift +# + +# The URL of the Swift endpoint (string value) +#backup_swift_url=<None> + +# Info to match when looking for swift in the service catalog. +# Format is: separated values of the form: +# <service_type>:<service_name>:<endpoint_type> - Only used if +# backup_swift_url is unset (string value) +#swift_catalog_info=object-store:swift:publicURL + +# Swift authentication mechanism (string value) +#backup_swift_auth=per_user + +# Swift authentication version. Specify "1" for auth 1.0, or +# "2" for auth 2.0 (string value) +#backup_swift_auth_version=1 + +# Swift tenant/account name. Required when connecting to an +# auth 2.0 system (string value) +#backup_swift_tenant=<None> + +# Swift user name (string value) +#backup_swift_user=<None> + +# Swift key for authentication (string value) +#backup_swift_key=<None> + +# The default Swift container to use (string value) +#backup_swift_container=volumebackups + +# The size in bytes of Swift backup objects (integer value) +#backup_swift_object_size=52428800 + +# The size in bytes that changes are tracked for incremental +# backups. backup_swift_object_size has to be multiple of +# backup_swift_block_size. (integer value) +#backup_swift_block_size=32768 + +# The number of retries to make for Swift operations (integer +# value) +#backup_swift_retry_attempts=3 + +# The backoff time in seconds between Swift retries (integer +# value) +#backup_swift_retry_backoff=2 + +# Enable or Disable the timer to send the periodic progress +# notifications to Ceilometer when backing up the volume to +# the Swift backend storage. The default value is True to +# enable the timer. (boolean value) +#backup_swift_enable_progress_timer=true + + +# +# Options defined in cinder.backup.drivers.tsm +# + +# Volume prefix for the backup id when backing up to TSM +# (string value) +#backup_tsm_volume_prefix=backup + +# TSM password for the running username (string value) +#backup_tsm_password=password + +# Enable or Disable compression for backups (boolean value) +#backup_tsm_compression=true + + +# +# Options defined in cinder.backup.manager +# + +# Driver to use for backups. (string value) +# Deprecated group/name - [DEFAULT]/backup_service +#backup_driver=cinder.backup.drivers.swift + + +# +# Options defined in cinder.cmd.volume +# + +# Backend override of host value. (string value) +# Deprecated group/name - [DEFAULT]/host +#backend_host=<None> + + +# +# Options defined in cinder.cmd.volume_usage_audit +# + +# If this option is specified then the start time specified is +# used instead of the start time of the last completed audit +# period. (string value) +#start_time=<None> + +# If this option is specified then the end time specified is +# used instead of the end time of the last completed audit +# period. (string value) +#end_time=<None> + +# Send the volume and snapshot create and delete notifications +# generated in the specified period. (boolean value) +#send_actions=false + + +# +# Options defined in cinder.common.config +# + +# File name for the paste.deploy config for cinder-api (string +# value) +api_paste_config=api-paste.ini + +# Top-level directory for maintaining cinder's state (string +# value) +# Deprecated group/name - [DEFAULT]/pybasedir +state_path=/var/lib/cinder + +# IP address of this host (string value) +my_ip={{ MANAGEMENT_INTERFACE_IP_ADDRESS }} + +# Default glance host name or IP (string value) +glance_host={{ CONTROLLER_HOST_ADDRESS }} + +# Default glance port (integer value) +#glance_port=9292 + +# A list of the glance API servers available to cinder +# ([hostname|ip]:port) (list value) +#glance_api_servers=$glance_host:$glance_port + +# Version of the glance API to use (integer value) +#glance_api_version=1 + +# Number retries when downloading an image from glance +# (integer value) +#glance_num_retries=0 + +# Allow to perform insecure SSL (https) requests to glance +# (boolean value) +#glance_api_insecure=false + +# Enables or disables negotiation of SSL layer compression. In +# some cases disabling compression can improve data +# throughput, such as when high network bandwidth is available +# and you use compressed image formats like qcow2. (boolean +# value) +#glance_api_ssl_compression=false + +# Location of ca certificates file to use for glance client +# requests. (string value) +#glance_ca_certificates_file=<None> + +# http/https timeout value for glance operations. If no value +# (None) is supplied here, the glanceclient default value is +# used. (integer value) +#glance_request_timeout=<None> + +# The topic that scheduler nodes listen on (string value) +#scheduler_topic=cinder-scheduler + +# The topic that volume nodes listen on (string value) +#volume_topic=cinder-volume + +# The topic that volume backup nodes listen on (string value) +#backup_topic=cinder-backup + +# DEPRECATED: Deploy v1 of the Cinder API. (boolean value) +#enable_v1_api=true + +# Deploy v2 of the Cinder API. (boolean value) +#enable_v2_api=true + +# Enables or disables rate limit of the API. (boolean value) +#api_rate_limit=true + +# Specify list of extensions to load when using +# osapi_volume_extension option with +# cinder.api.contrib.select_extensions (list value) +#osapi_volume_ext_list= + +# osapi volume extension to load (multi valued) +#osapi_volume_extension=cinder.api.contrib.standard_extensions + +# Full class name for the Manager for volume (string value) +#volume_manager=cinder.volume.manager.VolumeManager + +# Full class name for the Manager for volume backup (string +# value) +#backup_manager=cinder.backup.manager.BackupManager + +# Full class name for the Manager for scheduler (string value) +#scheduler_manager=cinder.scheduler.manager.SchedulerManager + +# Name of this node. This can be an opaque identifier. It is +# not necessarily a host name, FQDN, or IP address. (string +# value) +#host=cinder + +# Availability zone of this node (string value) +#storage_availability_zone=nova + +# Default availability zone for new volumes. If not set, the +# storage_availability_zone option value is used as the +# default for new volumes. (string value) +#default_availability_zone=<None> + +# Default volume type to use (string value) +#default_volume_type=<None> + +# Time period for which to generate volume usages. The options +# are hour, day, month, or year. (string value) +#volume_usage_audit_period=month + +# Path to the rootwrap configuration file to use for running +# commands as root (string value) +rootwrap_config=/etc/cinder/rootwrap.conf + +# Enable monkey patching (boolean value) +#monkey_patch=false + +# List of modules/decorators to monkey patch (list value) +#monkey_patch_modules= + +# Maximum time since last check-in for a service to be +# considered up (integer value) +#service_down_time=60 + +# The full class name of the volume API class to use (string +# value) +#volume_api_class=cinder.volume.api.API + +# The full class name of the volume backup API class (string +# value) +#backup_api_class=cinder.backup.api.API + +# The strategy to use for auth. Supports noauth, keystone, and +# deprecated. (string value) +auth_strategy=keystone + +# A list of backend names to use. These backend names should +# be backed by a unique [CONFIG] group with its options (list +# value) +#enabled_backends=<None> + +# Whether snapshots count against gigabyte quota (boolean +# value) +#no_snapshot_gb_quota=false + +# The full class name of the volume transfer API class (string +# value) +#transfer_api_class=cinder.transfer.api.API + +# The full class name of the volume replication API class +# (string value) +#replication_api_class=cinder.replication.api.API + +# The full class name of the consistencygroup API class +# (string value) +#consistencygroup_api_class=cinder.consistencygroup.api.API + +# OpenStack privileged account username. Used for requests to +# other services (such as Nova) that require an account with +# special rights. (string value) +#os_privileged_user_name=<None> + +# Password associated with the OpenStack privileged account. +# (string value) +#os_privileged_user_password=<None> + +# Tenant name associated with the OpenStack privileged +# account. (string value) +#os_privileged_user_tenant=<None> + + +# +# Options defined in cinder.compute +# + +# The full class name of the compute API class to use (string +# value) +#compute_api_class=cinder.compute.nova.API + + +# +# Options defined in cinder.compute.nova +# + +# Match this value when searching for nova in the service +# catalog. Format is: separated values of the form: +# <service_type>:<service_name>:<endpoint_type> (string value) +#nova_catalog_info=compute:Compute Service:publicURL + +# Same as nova_catalog_info, but for admin endpoint. (string +# value) +#nova_catalog_admin_info=compute:Compute Service:adminURL + +# Override service catalog lookup with template for nova +# endpoint e.g. http://localhost:8774/v2/%(project_id)s +# (string value) +#nova_endpoint_template=<None> + +# Same as nova_endpoint_template, but for admin endpoint. +# (string value) +#nova_endpoint_admin_template=<None> + +# Region name of this node (string value) +#os_region_name=<None> + +# Location of ca certificates file to use for nova client +# requests. (string value) +#nova_ca_certificates_file=<None> + +# Allow to perform insecure SSL requests to nova (boolean +# value) +#nova_api_insecure=false + + +# +# Options defined in cinder.db.api +# + +# Services to be added to the available pool on create +# (boolean value) +#enable_new_services=true + +# Template string to be used to generate volume names (string +# value) +volume_name_template=volume-%s + +# Template string to be used to generate snapshot names +# (string value) +snapshot_name_template=snapshot-%s + +# Template string to be used to generate backup names (string +# value) +backup_name_template=backup-%s + + +# +# Options defined in cinder.db.base +# + +# Driver to use for database access (string value) +#db_driver=cinder.db + + +# +# Options defined in cinder.image.glance +# + +# Default core properties of image (list value) +#glance_core_properties=checksum,container_format,disk_format,image_name,image_id,min_disk,min_ram,name,size + +# A list of url schemes that can be downloaded directly via +# the direct_url. Currently supported schemes: [file]. (list +# value) +#allowed_direct_url_schemes= + + +# +# Options defined in cinder.image.image_utils +# + +# Directory used for temporary storage during image conversion +# (string value) +#image_conversion_dir=$state_path/conversion + + +# +# Options defined in cinder.openstack.common.eventlet_backdoor +# + +# Enable eventlet backdoor. Acceptable values are 0, <port>, +# and <start>:<end>, where 0 results in listening on a random +# tcp port number; <port> results in listening on the +# specified port number (and not enabling backdoor if that +# port is in use); and <start>:<end> results in listening on +# the smallest unused port number within the specified range +# of port numbers. The chosen port is displayed in the +# service's log file. (string value) +#backdoor_port=<None> + + +# +# Options defined in cinder.openstack.common.periodic_task +# + +# Some periodic tasks can be run in a separate process. Should +# we run them here? (boolean value) +#run_external_periodic_tasks=true + + +# +# Options defined in cinder.openstack.common.policy +# + +# The JSON file that defines policies. (string value) +#policy_file=policy.json + +# Default rule. Enforced when a requested rule is not found. +# (string value) +#policy_default_rule=default + +# Directories where policy configuration files are stored. +# They can be relative to any directory in the search path +# defined by the config_dir option, or absolute paths. The +# file defined by policy_file must exist for these directories +# to be searched. Missing or empty directories are ignored. +# (multi valued) +#policy_dirs=policy.d + + +# +# Options defined in cinder.openstack.common.versionutils +# + +# Enables or disables fatal status of deprecations. (boolean +# value) +#fatal_deprecations=false + + +# +# Options defined in cinder.scheduler.driver +# + +# The scheduler host manager class to use (string value) +#scheduler_host_manager=cinder.scheduler.host_manager.HostManager + +# Maximum number of attempts to schedule an volume (integer +# value) +#scheduler_max_attempts=3 + + +# +# Options defined in cinder.scheduler.host_manager +# + +# Which filter class names to use for filtering hosts when not +# specified in the request. (list value) +#scheduler_default_filters=AvailabilityZoneFilter,CapacityFilter,CapabilitiesFilter + +# Which weigher class names to use for weighing hosts. (list +# value) +#scheduler_default_weighers=CapacityWeigher + + +# +# Options defined in cinder.scheduler.manager +# + +# Default scheduler driver to use (string value) +#scheduler_driver=cinder.scheduler.filter_scheduler.FilterScheduler + + +# +# Options defined in cinder.scheduler.scheduler_options +# + +# Absolute path to scheduler configuration JSON file. (string +# value) +#scheduler_json_config_location= + + +# +# Options defined in cinder.scheduler.simple +# + +# This configure option has been deprecated along with the +# SimpleScheduler. New scheduler is able to gather capacity +# information for each host, thus setting the maximum number +# of volume gigabytes for host is no longer needed. It's safe +# to remove this configure from cinder.conf. (integer value) +#max_gigabytes=10000 + + +# +# Options defined in cinder.scheduler.weights.capacity +# + +# Multiplier used for weighing volume capacity. Negative +# numbers mean to stack vs spread. (floating point value) +#capacity_weight_multiplier=1.0 + +# Multiplier used for weighing volume capacity. Negative +# numbers mean to stack vs spread. (floating point value) +#allocated_capacity_weight_multiplier=-1.0 + + +# +# Options defined in cinder.scheduler.weights.volume_number +# + +# Multiplier used for weighing volume number. Negative numbers +# mean to spread vs stack. (floating point value) +#volume_number_multiplier=-1.0 + + +# +# Options defined in cinder.transfer.api +# + +# The number of characters in the salt. (integer value) +#volume_transfer_salt_length=8 + +# The number of characters in the autogenerated auth key. +# (integer value) +#volume_transfer_key_length=16 + + +# +# Options defined in cinder.volume.api +# + +# Cache volume availability zones in memory for the provided +# duration in seconds (integer value) +#az_cache_duration=3600 + +# Create volume from snapshot at the host where snapshot +# resides (boolean value) +#snapshot_same_host=true + +# Ensure that the new volumes are the same AZ as snapshot or +# source volume (boolean value) +#cloned_volume_same_az=true + + +# +# Options defined in cinder.volume.driver +# + +# The maximum number of times to rescan iSER targetto find +# volume (integer value) +#num_iser_scan_tries=3 + +# This option is deprecated and unused. It will be removed in +# the Liberty release. (integer value) +#iser_num_targets=<None> + +# Prefix for iSER volumes (string value) +#iser_target_prefix=iqn.2010-10.org.openstack: + +# The IP address that the iSER daemon is listening on (string +# value) +#iser_ip_address=$my_ip + +# The port that the iSER daemon is listening on (integer +# value) +#iser_port=3260 + +# The name of the iSER target user-land tool to use (string +# value) +#iser_helper=tgtadm + +# Number of times to attempt to run flakey shell commands +# (integer value) +#num_shell_tries=3 + +# The percentage of backend capacity is reserved (integer +# value) +#reserved_percentage=0 + +# This option is deprecated and unused. It will be removed in +# the Liberty release. (integer value) +#iscsi_num_targets=<None> + +# Prefix for iSCSI volumes (string value) +#iscsi_target_prefix=iqn.2010-10.org.openstack: + +# The IP address that the iSCSI daemon is listening on (string +# value) +iscsi_ip_address={{ MANAGEMENT_INTERFACE_IP_ADDRESS }} + +# The list of secondary IP addresses of the iSCSI daemon (list +# value) +#iscsi_secondary_ip_addresses= + +# The port that the iSCSI daemon is listening on (integer +# value) +iscsi_port=3260 + +# The maximum number of times to rescan targets to find volume +# (integer value) +# Deprecated group/name - [DEFAULT]/num_iscsi_scan_tries +#num_volume_device_scan_tries=3 + +# The backend name for a given driver implementation (string +# value) +volume_backend_name=LVM_iSCSI + +# Do we attach/detach volumes in cinder using multipath for +# volume to image and image to volume transfers? (boolean +# value) +#use_multipath_for_image_xfer=false + +# If this is set to True, attachment of volumes for image +# transfer will be aborted when multipathd is not running. +# Otherwise, it will fallback to single path. (boolean value) +#enforce_multipath_for_image_xfer=false + +# Method used to wipe old volumes (string value) +volume_clear=zero + +# Size in MiB to wipe at start of old volumes. 0 => all +# (integer value) +volume_clear_size=50 + +# The flag to pass to ionice to alter the i/o priority of the +# process used to zero a volume after deletion, for example +# "-c3" for idle only priority. (string value) +#volume_clear_ionice=<None> + +# iSCSI target user-land tool to use. tgtadm is default, use +# lioadm for LIO iSCSI support, scstadmin for SCST target +# support, iseradm for the ISER protocol, ietadm for iSCSI +# Enterprise Target, iscsictl for Chelsio iSCSI Target or fake +# for testing. (string value) +iscsi_helper=lioadm + +# Volume configuration file storage directory (string value) +volumes_dir=$state_path/volumes + +# IET configuration file (string value) +#iet_conf=/etc/iet/ietd.conf + +# Chiscsi (CXT) global defaults configuration file (string +# value) +#chiscsi_conf=/etc/chelsio-iscsi/chiscsi.conf + +# This option is deprecated and unused. It will be removed in +# the next release. (string value) +#lio_initiator_iqns= + +# Sets the behavior of the iSCSI target to either perform +# blockio or fileio optionally, auto can be set and Cinder +# will autodetect type of backing device (string value) +#iscsi_iotype=fileio + +# The default block size used when copying/clearing volumes +# (string value) +#volume_dd_blocksize=1M + +# The blkio cgroup name to be used to limit bandwidth of +# volume copy (string value) +#volume_copy_blkio_cgroup_name=cinder-volume-copy + +# The upper limit of bandwidth of volume copy. 0 => unlimited +# (integer value) +#volume_copy_bps_limit=0 + +# Sets the behavior of the iSCSI target to either perform +# write-back(on) or write-through(off). This parameter is +# valid if iscsi_helper is set to tgtadm or iseradm. (string +# value) +#iscsi_write_cache=on + +# Determines the iSCSI protocol for new iSCSI volumes, created +# with tgtadm or lioadm target helpers. In order to enable +# RDMA, this parameter should be set with the value "iser". +# The supported iSCSI protocol values are "iscsi" and "iser". +# (string value) +#iscsi_protocol=iscsi + +# The path to the client certificate key for verification, if +# the driver supports it. (string value) +#driver_client_cert_key=<None> + +# The path to the client certificate for verification, if the +# driver supports it. (string value) +#driver_client_cert=<None> + +# Tell driver to use SSL for connection to backend storage if +# the driver supports it. (boolean value) +#driver_use_ssl=false + +# Float representation of the over subscription ratio when +# thin provisioning is involved. Default ratio is 20.0, +# meaning provisioned capacity can be 20 times of the total +# physical capacity. If the ratio is 10.5, it means +# provisioned capacity can be 10.5 times of the total physical +# capacity. A ratio of 1.0 means provisioned capacity cannot +# exceed the total physical capacity. A ratio lower than 1.0 +# will be ignored and the default value will be used instead. +# (floating point value) +#max_over_subscription_ratio=20.0 + +# Certain ISCSI targets have predefined target names, SCST +# target driver uses this name. (string value) +#scst_target_iqn_name=<None> + +# SCST target implementation can choose from multiple SCST +# target drivers. (string value) +#scst_target_driver=iscsi + +# Option to enable/disable CHAP authentication for targets. +# (boolean value) +# Deprecated group/name - [DEFAULT]/eqlx_use_chap +#use_chap_auth=false + +# CHAP user name. (string value) +# Deprecated group/name - [DEFAULT]/eqlx_chap_login +#chap_username= + +# Password for specified CHAP account name. (string value) +# Deprecated group/name - [DEFAULT]/eqlx_chap_password +#chap_password= + +# Namespace for driver private data values to be saved in. +# (string value) +#driver_data_namespace=<None> + +# String representation for an equation that will be used to +# filter hosts. Only used when the driver filter is set to be +# used by the Cinder scheduler. (string value) +#filter_function=<None> + +# String representation for an equation that will be used to +# determine the goodness of a host. Only used when using the +# goodness weigher is set to be used by the Cinder scheduler. +# (string value) +#goodness_function=<None> + + +# +# Options defined in cinder.volume.drivers.block_device +# + +# List of all available devices (list value) +#available_devices= + + +# +# Options defined in cinder.volume.drivers.cloudbyte.options +# + +# These values will be used for CloudByte storage's addQos API +# call. (dict value) +#cb_add_qosgroup=latency:15,iops:10,graceallowed:false,iopscontrol:true,memlimit:0,throughput:0,tpcontrol:false,networkspeed:0 + +# Driver will use this API key to authenticate against the +# CloudByte storage's management interface. (string value) +#cb_apikey=None + +# CloudByte storage specific account name. This maps to a +# project name in OpenStack. (string value) +#cb_account_name=None + +# This corresponds to the name of Tenant Storage Machine (TSM) +# in CloudByte storage. A volume will be created in this TSM. +# (string value) +#cb_tsm_name=None + +# A retry value in seconds. Will be used by the driver to +# check if volume creation was successful in CloudByte +# storage. (integer value) +#cb_confirm_volume_create_retry_interval=5 + +# Will confirm a successful volume creation in CloudByte +# storage by making this many number of attempts. (integer +# value) +#cb_confirm_volume_create_retries=3 + +# These values will be used for CloudByte storage's +# createVolume API call. (dict value) +#cb_create_volume=compression:off,deduplication:off,blocklength:512B,sync:always,protocoltype:ISCSI,recordsize:16k + + +# +# Options defined in cinder.volume.drivers.datera +# + +# DEPRECATED: This will be removed in the Liberty release. Use +# san_login and san_password instead. This directly sets the +# Datera API token. (string value) +#datera_api_token=<None> + +# Datera API port. (string value) +#datera_api_port=7717 + +# Datera API version. (string value) +#datera_api_version=1 + +# Number of replicas to create of an inode. (string value) +#datera_num_replicas=3 + + +# +# Options defined in cinder.volume.drivers.dell.dell_storagecenter_common +# + +# Storage Center System Serial Number (integer value) +#dell_sc_ssn=64702 + +# Dell API port (integer value) +#dell_sc_api_port=3033 + +# Name of the server folder to use on the Storage Center +# (string value) +#dell_sc_server_folder=openstack + +# Name of the volume folder to use on the Storage Center +# (string value) +#dell_sc_volume_folder=openstack + + +# +# Options defined in cinder.volume.drivers.emc.emc_vmax_common +# + +# use this file for cinder emc plugin config data (string +# value) +#cinder_emc_config_file=/etc/cinder/cinder_emc_config.xml + + +# +# Options defined in cinder.volume.drivers.emc.emc_vnx_cli +# + +# VNX authentication scope type. (string value) +#storage_vnx_authentication_type=global + +# Directory path that contains the VNX security file. Make +# sure the security file is generated first. (string value) +#storage_vnx_security_file_dir=<None> + +# Naviseccli Path. (string value) +#naviseccli_path= + +# Storage pool name. (string value) +#storage_vnx_pool_name=<None> + +# VNX secondary SP IP Address. (string value) +#san_secondary_ip=<None> + +# Default timeout for CLI operations in minutes. For example, +# LUN migration is a typical long running operation, which +# depends on the LUN size and the load of the array. An upper +# bound in the specific deployment can be set to avoid +# unnecessary long wait. By default, it is 365 days long. +# (integer value) +#default_timeout=525600 + +# Default max number of LUNs in a storage group. By default, +# the value is 255. (integer value) +#max_luns_per_storage_group=255 + +# To destroy storage group when the last LUN is removed from +# it. By default, the value is False. (boolean value) +#destroy_empty_storage_group=false + +# Mapping between hostname and its iSCSI initiator IP +# addresses. (string value) +#iscsi_initiators= + +# Automatically register initiators. By default, the value is +# False. (boolean value) +#initiator_auto_registration=false + +# Automatically deregister initiators after the related +# storage group is destroyed. By default, the value is False. +# (boolean value) +#initiator_auto_deregistration=false + +# Report free_capacity_gb as 0 when the limit to maximum +# number of pool LUNs is reached. By default, the value is +# False. (boolean value) +#check_max_pool_luns_threshold=false + +# Delete a LUN even if it is in Storage Groups. (boolean +# value) +#force_delete_lun_in_storagegroup=false + + +# +# Options defined in cinder.volume.drivers.emc.xtremio +# + +# XMS cluster id in multi-cluster environment (string value) +#xtremio_cluster_name= + + +# +# Options defined in cinder.volume.drivers.eqlx +# + +# Group name to use for creating volumes. Defaults to +# "group-0". (string value) +#eqlx_group_name=group-0 + +# Timeout for the Group Manager cli command execution. Default +# is 30. (integer value) +#eqlx_cli_timeout=30 + +# Maximum retry count for reconnection. Default is 5. (integer +# value) +#eqlx_cli_max_retries=5 + +# Use CHAP authentication for targets. Note that this option +# is deprecated in favour of "use_chap_auth" as specified in +# cinder/volume/driver.py and will be removed in next release. +# (boolean value) +#eqlx_use_chap=false + +# Existing CHAP account name. Note that this option is +# deprecated in favour of "chap_username" as specified in +# cinder/volume/driver.py and will be removed in next release. +# (string value) +#eqlx_chap_login=admin + +# Password for specified CHAP account name. Note that this +# option is deprecated in favour of "chap_password" as +# specified in cinder/volume/driver.py and will be removed in +# the next release (string value) +#eqlx_chap_password=password + +# Pool in which volumes will be created. Defaults to +# "default". (string value) +#eqlx_pool=default + + +# +# Options defined in cinder.volume.drivers.glusterfs +# + +# File with the list of available gluster shares (string +# value) +#glusterfs_shares_config=/etc/cinder/glusterfs_shares + +# Create volumes as sparsed files which take no space.If set +# to False volume is created as regular file.In such case +# volume creation takes a lot of time. (boolean value) +#glusterfs_sparsed_volumes=true + +# Create volumes as QCOW2 files rather than raw files. +# (boolean value) +#glusterfs_qcow2_volumes=false + +# Base dir containing mount points for gluster shares. (string +# value) +#glusterfs_mount_point_base=$state_path/mnt + + +# +# Options defined in cinder.volume.drivers.hds.hds +# + +# The configuration file for the Cinder HDS driver for HUS +# (string value) +#hds_cinder_config_file=/opt/hds/hus/cinder_hus_conf.xml + + +# +# Options defined in cinder.volume.drivers.hds.iscsi +# + +# Configuration file for HDS iSCSI cinder plugin (string +# value) +#hds_hnas_iscsi_config_file=/opt/hds/hnas/cinder_iscsi_conf.xml + + +# +# Options defined in cinder.volume.drivers.hds.nfs +# + +# Configuration file for HDS NFS cinder plugin (string value) +#hds_hnas_nfs_config_file=/opt/hds/hnas/cinder_nfs_conf.xml + + +# +# Options defined in cinder.volume.drivers.hitachi.hbsd_common +# + +# Serial number of storage system (string value) +#hitachi_serial_number=<None> + +# Name of an array unit (string value) +#hitachi_unit_name=<None> + +# Pool ID of storage system (integer value) +#hitachi_pool_id=<None> + +# Thin pool ID of storage system (integer value) +#hitachi_thin_pool_id=<None> + +# Range of logical device of storage system (string value) +#hitachi_ldev_range=<None> + +# Default copy method of storage system (string value) +#hitachi_default_copy_method=FULL + +# Copy speed of storage system (integer value) +#hitachi_copy_speed=3 + +# Interval to check copy (integer value) +#hitachi_copy_check_interval=3 + +# Interval to check copy asynchronously (integer value) +#hitachi_async_copy_check_interval=10 + +# Control port names for HostGroup or iSCSI Target (string +# value) +#hitachi_target_ports=<None> + +# Range of group number (string value) +#hitachi_group_range=<None> + +# Request for creating HostGroup or iSCSI Target (boolean +# value) +#hitachi_group_request=false + + +# +# Options defined in cinder.volume.drivers.hitachi.hbsd_fc +# + +# Request for FC Zone creating HostGroup (boolean value) +#hitachi_zoning_request=false + + +# +# Options defined in cinder.volume.drivers.hitachi.hbsd_horcm +# + +# Instance numbers for HORCM (string value) +#hitachi_horcm_numbers=200,201 + +# Username of storage system for HORCM (string value) +#hitachi_horcm_user=<None> + +# Password of storage system for HORCM (string value) +#hitachi_horcm_password=<None> + +# Add to HORCM configuration (boolean value) +#hitachi_horcm_add_conf=true + + +# +# Options defined in cinder.volume.drivers.hitachi.hbsd_iscsi +# + +# Add CHAP user (boolean value) +#hitachi_add_chap_user=false + +# iSCSI authentication method (string value) +#hitachi_auth_method=<None> + +# iSCSI authentication username (string value) +#hitachi_auth_user=HBSD-CHAP-user + +# iSCSI authentication password (string value) +#hitachi_auth_password=HBSD-CHAP-password + + +# +# Options defined in cinder.volume.drivers.huawei +# + +# The configuration file for the Cinder Huawei driver (string +# value) +#cinder_huawei_conf_file=/etc/cinder/cinder_huawei_conf.xml + + +# +# Options defined in cinder.volume.drivers.ibm.flashsystem +# + +# Connection protocol should be FC. (string value) +#flashsystem_connection_protocol=FC + +# Connect with multipath (FC only). (boolean value) +#flashsystem_multipath_enabled=false + +# Allows vdisk to multi host mapping. (boolean value) +#flashsystem_multihostmap_enabled=true + + +# +# Options defined in cinder.volume.drivers.ibm.gpfs +# + +# Specifies the path of the GPFS directory where Block Storage +# volume and snapshot files are stored. (string value) +#gpfs_mount_point_base=<None> + +# Specifies the path of the Image service repository in GPFS. +# Leave undefined if not storing images in GPFS. (string +# value) +#gpfs_images_dir=<None> + +# Specifies the type of image copy to be used. Set this when +# the Image service repository also uses GPFS so that image +# files can be transferred efficiently from the Image service +# to the Block Storage service. There are two valid values: +# "copy" specifies that a full copy of the image is made; +# "copy_on_write" specifies that copy-on-write optimization +# strategy is used and unmodified blocks of the image file are +# shared efficiently. (string value) +#gpfs_images_share_mode=<None> + +# Specifies an upper limit on the number of indirections +# required to reach a specific block due to snapshots or +# clones. A lengthy chain of copy-on-write snapshots or +# clones can have a negative impact on performance, but +# improves space utilization. 0 indicates unlimited clone +# depth. (integer value) +#gpfs_max_clone_depth=0 + +# Specifies that volumes are created as sparse files which +# initially consume no space. If set to False, the volume is +# created as a fully allocated file, in which case, creation +# may take a significantly longer time. (boolean value) +#gpfs_sparse_volumes=true + +# Specifies the storage pool that volumes are assigned to. By +# default, the system storage pool is used. (string value) +#gpfs_storage_pool=system + + +# +# Options defined in cinder.volume.drivers.ibm.ibmnas +# + +# IBMNAS platform type to be used as backend storage; valid +# values are - v7ku : for using IBM Storwize V7000 Unified, +# sonas : for using IBM Scale Out NAS, gpfs-nas : for using +# NFS based IBM GPFS deployments. (string value) +#ibmnas_platform_type=v7ku + + +# +# Options defined in cinder.volume.drivers.ibm.storwize_svc +# + +# Storage system storage pool for volumes (string value) +#storwize_svc_volpool_name=volpool + +# Storage system space-efficiency parameter for volumes +# (percentage) (integer value) +#storwize_svc_vol_rsize=2 + +# Storage system threshold for volume capacity warnings +# (percentage) (integer value) +#storwize_svc_vol_warning=0 + +# Storage system autoexpand parameter for volumes (True/False) +# (boolean value) +#storwize_svc_vol_autoexpand=true + +# Storage system grain size parameter for volumes +# (32/64/128/256) (integer value) +#storwize_svc_vol_grainsize=256 + +# Storage system compression option for volumes (boolean +# value) +#storwize_svc_vol_compression=false + +# Enable Easy Tier for volumes (boolean value) +#storwize_svc_vol_easytier=true + +# The I/O group in which to allocate volumes (integer value) +#storwize_svc_vol_iogrp=0 + +# Maximum number of seconds to wait for FlashCopy to be +# prepared. Maximum value is 600 seconds (10 minutes) (integer +# value) +#storwize_svc_flashcopy_timeout=120 + +# Connection protocol (iSCSI/FC) (string value) +#storwize_svc_connection_protocol=iSCSI + +# Configure CHAP authentication for iSCSI connections +# (Default: Enabled) (boolean value) +#storwize_svc_iscsi_chap_enabled=true + +# Connect with multipath (FC only; iSCSI multipath is +# controlled by Nova) (boolean value) +#storwize_svc_multipath_enabled=false + +# Allows vdisk to multi host mapping (boolean value) +#storwize_svc_multihostmap_enabled=true + +# Indicate whether svc driver is compatible for NPIV setup. If +# it is compatible, it will allow no wwpns being returned on +# get_conn_fc_wwpns during initialize_connection (boolean +# value) +#storwize_svc_npiv_compatibility_mode=false + +# Allow tenants to specify QOS on create (boolean value) +#storwize_svc_allow_tenant_qos=false + +# If operating in stretched cluster mode, specify the name of +# the pool in which mirrored copies are stored.Example: +# "pool2" (string value) +#storwize_svc_stretched_cluster_partner=<None> + + +# +# Options defined in cinder.volume.drivers.ibm.xiv_ds8k +# + +# Proxy driver that connects to the IBM Storage Array (string +# value) +#xiv_ds8k_proxy=xiv_ds8k_openstack.nova_proxy.XIVDS8KNovaProxy + +# Connection type to the IBM Storage Array (string value) +#xiv_ds8k_connection_type=iscsi + +# CHAP authentication mode, effective only for iscsi +# (disabled|enabled) (string value) +#xiv_chap=disabled + + +# +# Options defined in cinder.volume.drivers.lvm +# + +# Name for the VG that will contain exported volumes (string +# value) +volume_group=cinder-volumes + +# If >0, create LVs with multiple mirrors. Note that this +# requires lvm_mirrors + 2 PVs with available space (integer +# value) +#lvm_mirrors=0 + +# Type of LVM volumes to deploy (string value) +#lvm_type=default + +# LVM conf file to use for the LVM driver in Cinder; this +# setting is ignored if the specified file does not exist (You +# can also specify 'None' to not use a conf file even if one +# exists). (string value) +#lvm_conf_file=/etc/cinder/lvm.conf + + +# +# Options defined in cinder.volume.drivers.netapp.options +# + +# The vFiler unit on which provisioning of block storage +# volumes will be done. This option is only used by the driver +# when connecting to an instance with a storage family of Data +# ONTAP operating in 7-Mode. Only use this option when +# utilizing the MultiStore feature on the NetApp storage +# system. (string value) +#netapp_vfiler=<None> + +# The name of the config.conf stanza for a Data ONTAP (7-mode) +# HA partner. This option is only used by the driver when +# connecting to an instance with a storage family of Data +# ONTAP operating in 7-Mode, and it is required if the storage +# protocol selected is FC. (string value) +#netapp_partner_backend_name=<None> + +# Administrative user account name used to access the storage +# system or proxy server. (string value) +#netapp_login=<None> + +# Password for the administrative user account specified in +# the netapp_login option. (string value) +#netapp_password=<None> + +# This option specifies the virtual storage server (Vserver) +# name on the storage cluster on which provisioning of block +# storage volumes should occur. (string value) +#netapp_vserver=<None> + +# The hostname (or IP address) for the storage system or proxy +# server. (string value) +#netapp_server_hostname=<None> + +# The TCP port to use for communication with the storage +# system or proxy server. If not specified, Data ONTAP drivers +# will use 80 for HTTP and 443 for HTTPS; E-Series will use +# 8080 for HTTP and 8443 for HTTPS. (integer value) +#netapp_server_port=<None> + +# This option is used to specify the path to the E-Series +# proxy application on a proxy server. The value is combined +# with the value of the netapp_transport_type, +# netapp_server_hostname, and netapp_server_port options to +# create the URL used by the driver to connect to the proxy +# application. (string value) +#netapp_webservice_path=/devmgr/v2 + +# This option is only utilized when the storage family is +# configured to eseries. This option is used to restrict +# provisioning to the specified controllers. Specify the value +# of this option to be a comma separated list of controller +# hostnames or IP addresses to be used for provisioning. +# (string value) +#netapp_controller_ips=<None> + +# Password for the NetApp E-Series storage array. (string +# value) +#netapp_sa_password=<None> + +# This option is used to restrict provisioning to the +# specified storage pools. Only dynamic disk pools are +# currently supported. Specify the value of this option to be +# a comma separated list of disk pool names to be used for +# provisioning. (string value) +#netapp_storage_pools=<None> + +# This option is used to define how the controllers in the +# E-Series storage array will work with the particular +# operating system on the hosts that are connected to it. +# (string value) +#netapp_eseries_host_type=linux_dm_mp + +# If the percentage of available space for an NFS share has +# dropped below the value specified by this option, the NFS +# image cache will be cleaned. (integer value) +#thres_avl_size_perc_start=20 + +# When the percentage of available space on an NFS share has +# reached the percentage specified by this option, the driver +# will stop clearing files from the NFS image cache that have +# not been accessed in the last M minutes, where M is the +# value of the expiry_thres_minutes configuration option. +# (integer value) +#thres_avl_size_perc_stop=60 + +# This option specifies the threshold for last access time for +# images in the NFS image cache. When a cache cleaning cycle +# begins, images in the cache that have not been accessed in +# the last M minutes, where M is the value of this parameter, +# will be deleted from the cache to create free space on the +# NFS share. (integer value) +#expiry_thres_minutes=720 + +# This option specifies the path of the NetApp copy offload +# tool binary. Ensure that the binary has execute permissions +# set which allow the effective user of the cinder-volume +# process to execute the file. (string value) +#netapp_copyoffload_tool_path=<None> + +# The quantity to be multiplied by the requested volume size +# to ensure enough space is available on the virtual storage +# server (Vserver) to fulfill the volume creation request. +# (floating point value) +#netapp_size_multiplier=1.2 + +# This option is only utilized when the storage protocol is +# configured to use iSCSI or FC. This option is used to +# restrict provisioning to the specified controller volumes. +# Specify the value of this option to be a comma separated +# list of NetApp controller volume names to be used for +# provisioning. (string value) +#netapp_volume_list=<None> + +# The storage family type used on the storage system; valid +# values are ontap_7mode for using Data ONTAP operating in +# 7-Mode, ontap_cluster for using clustered Data ONTAP, or +# eseries for using E-Series. (string value) +#netapp_storage_family=ontap_cluster + +# The storage protocol to be used on the data path with the +# storage system. (string value) +#netapp_storage_protocol=<None> + +# The transport protocol used when communicating with the +# storage system or proxy server. (string value) +#netapp_transport_type=http + + +# +# Options defined in cinder.volume.drivers.nfs +# + +# File with the list of available nfs shares (string value) +#nfs_shares_config=/etc/cinder/nfs_shares + +# Create volumes as sparsed files which take no space.If set +# to False volume is created as regular file.In such case +# volume creation takes a lot of time. (boolean value) +#nfs_sparsed_volumes=true + +# Percent of ACTUAL usage of the underlying volume before no +# new volumes can be allocated to the volume destination. +# (floating point value) +#nfs_used_ratio=0.95 + +# This will compare the allocated to available space on the +# volume destination. If the ratio exceeds this number, the +# destination will no longer be valid. (floating point value) +#nfs_oversub_ratio=1.0 + +# Base dir containing mount points for nfs shares. (string +# value) +#nfs_mount_point_base=$state_path/mnt + +# Mount options passed to the nfs client. See section of the +# nfs man page for details. (string value) +#nfs_mount_options=<None> + +# The number of attempts to mount nfs shares before raising an +# error. At least one attempt will be made to mount an nfs +# share, regardless of the value specified. (integer value) +#nfs_mount_attempts=3 + + +# +# Options defined in cinder.volume.drivers.nimble +# + +# Nimble Controller pool name (string value) +#nimble_pool_name=default + +# Nimble Subnet Label (string value) +#nimble_subnet_label=* + + +# +# Options defined in cinder.volume.drivers.openvstorage +# + +# Vpool to use for volumes - backend is defined by vpool not +# by us. (string value) +#vpool_name= + + +# +# Options defined in cinder.volume.drivers.prophetstor.options +# + +# DPL pool uuid in which DPL volumes are stored. (string +# value) +#dpl_pool= + +# DPL port number. (integer value) +#dpl_port=8357 + + +# +# Options defined in cinder.volume.drivers.pure +# + +# REST API authorization token. (string value) +#pure_api_token=<None> + + +# +# Options defined in cinder.volume.drivers.quobyte +# + +# URL to the Quobyte volume e.g., quobyte://<DIR host>/<volume +# name> (string value) +#quobyte_volume_url=<None> + +# Path to a Quobyte Client configuration file. (string value) +#quobyte_client_cfg=<None> + +# Create volumes as sparse files which take no space. If set +# to False, volume is created as regular file.In such case +# volume creation takes a lot of time. (boolean value) +#quobyte_sparsed_volumes=true + +# Create volumes as QCOW2 files rather than raw files. +# (boolean value) +#quobyte_qcow2_volumes=true + +# Base dir containing the mount point for the Quobyte volume. +# (string value) +#quobyte_mount_point_base=$state_path/mnt + + +# +# Options defined in cinder.volume.drivers.rbd +# + +# The RADOS pool where rbd volumes are stored (string value) +#rbd_pool=rbd + +# The RADOS client name for accessing rbd volumes - only set +# when using cephx authentication (string value) +#rbd_user=<None> + +# Path to the ceph configuration file (string value) +#rbd_ceph_conf= + +# Flatten volumes created from snapshots to remove dependency +# from volume to snapshot (boolean value) +#rbd_flatten_volume_from_snapshot=false + +# The libvirt uuid of the secret for the rbd_user volumes +# (string value) +#rbd_secret_uuid=<None> + +# Directory where temporary image files are stored when the +# volume driver does not write them directly to the volume. +# Warning: this option is now deprecated, please use +# image_conversion_dir instead. (string value) +#volume_tmp_dir=<None> + +# Maximum number of nested volume clones that are taken before +# a flatten occurs. Set to 0 to disable cloning. (integer +# value) +#rbd_max_clone_depth=5 + +# Volumes will be chunked into objects of this size (in +# megabytes). (integer value) +#rbd_store_chunk_size=4 + +# Timeout value (in seconds) used when connecting to ceph +# cluster. If value < 0, no timeout is set and default +# librados value is used. (integer value) +#rados_connect_timeout=-1 + + +# +# Options defined in cinder.volume.drivers.remotefs +# + +# IP address or Hostname of NAS system. (string value) +#nas_ip= + +# User name to connect to NAS system. (string value) +#nas_login=admin + +# Password to connect to NAS system. (string value) +#nas_password= + +# SSH port to use to connect to NAS system. (integer value) +#nas_ssh_port=22 + +# Filename of private key to use for SSH authentication. +# (string value) +#nas_private_key= + +# Allow network-attached storage systems to operate in a +# secure environment where root level access is not permitted. +# If set to False, access is as the root user and insecure. If +# set to True, access is not as root. If set to auto, a check +# is done to determine if this is a new installation: True is +# used if so, otherwise False. Default is auto. (string value) +#nas_secure_file_operations=auto + +# Set more secure file permissions on network-attached storage +# volume files to restrict broad other/world access. If set to +# False, volumes are created with open permissions. If set to +# True, volumes are created with permissions for the cinder +# user and group (660). If set to auto, a check is done to +# determine if this is a new installation: True is used if so, +# otherwise False. Default is auto. (string value) +#nas_secure_file_permissions=auto + +# Path to the share to use for storing Cinder volumes. For +# example: "/srv/export1" for an NFS server export available +# at 10.0.5.10:/srv/export1 . (string value) +#nas_share_path= + +# Options used to mount the storage backend file system where +# Cinder volumes are stored. (string value) +#nas_mount_options=<None> + + +# +# Options defined in cinder.volume.drivers.san.hp.hp_3par_common +# + +# 3PAR WSAPI Server Url like https://<3par ip>:8080/api/v1 +# (string value) +#hp3par_api_url= + +# 3PAR Super user username (string value) +#hp3par_username= + +# 3PAR Super user password (string value) +#hp3par_password= + +# List of the CPG(s) to use for volume creation (list value) +#hp3par_cpg=OpenStack + +# The CPG to use for Snapshots for volumes. If empty the +# userCPG will be used. (string value) +#hp3par_cpg_snap= + +# The time in hours to retain a snapshot. You can't delete it +# before this expires. (string value) +#hp3par_snapshot_retention= + +# The time in hours when a snapshot expires and is deleted. +# This must be larger than expiration (string value) +#hp3par_snapshot_expiration= + +# Enable HTTP debugging to 3PAR (boolean value) +#hp3par_debug=false + +# List of target iSCSI addresses to use. (list value) +#hp3par_iscsi_ips= + +# Enable CHAP authentication for iSCSI connections. (boolean +# value) +#hp3par_iscsi_chap_enabled=false + + +# +# Options defined in cinder.volume.drivers.san.hp.hp_lefthand_rest_proxy +# + +# HP LeftHand WSAPI Server Url like https://<LeftHand +# ip>:8081/lhos (string value) +#hplefthand_api_url=<None> + +# HP LeftHand Super user username (string value) +#hplefthand_username=<None> + +# HP LeftHand Super user password (string value) +#hplefthand_password=<None> + +# HP LeftHand cluster name (string value) +#hplefthand_clustername=<None> + +# Configure CHAP authentication for iSCSI connections +# (Default: Disabled) (boolean value) +#hplefthand_iscsi_chap_enabled=false + +# Enable HTTP debugging to LeftHand (boolean value) +#hplefthand_debug=false + + +# +# Options defined in cinder.volume.drivers.san.san +# + +# Use thin provisioning for SAN volumes? (boolean value) +#san_thin_provision=true + +# IP address of SAN controller (string value) +#san_ip= + +# Username for SAN controller (string value) +#san_login=admin + +# Password for SAN controller (string value) +#san_password= + +# Filename of private key to use for SSH authentication +# (string value) +#san_private_key= + +# Cluster name to use for creating volumes (string value) +#san_clustername= + +# SSH port to use with SAN (integer value) +#san_ssh_port=22 + +# Execute commands locally instead of over SSH; use if the +# volume service is running on the SAN device (boolean value) +#san_is_local=false + +# SSH connection timeout in seconds (integer value) +#ssh_conn_timeout=30 + +# Minimum ssh connections in the pool (integer value) +#ssh_min_pool_conn=1 + +# Maximum ssh connections in the pool (integer value) +#ssh_max_pool_conn=5 + + +# +# Options defined in cinder.volume.drivers.scality +# + +# Path or URL to Scality SOFS configuration file (string +# value) +#scality_sofs_config=<None> + +# Base dir where Scality SOFS shall be mounted (string value) +#scality_sofs_mount_point=$state_path/scality + +# Path from Scality SOFS root to volume dir (string value) +#scality_sofs_volume_dir=cinder/volumes + + +# +# Options defined in cinder.volume.drivers.smbfs +# + +# File with the list of available smbfs shares. (string value) +#smbfs_shares_config=/etc/cinder/smbfs_shares + +# Default format that will be used when creating volumes if no +# volume format is specified. (string value) +#smbfs_default_volume_format=qcow2 + +# Create volumes as sparsed files which take no space rather +# than regular files when using raw format, in which case +# volume creation takes lot of time. (boolean value) +#smbfs_sparsed_volumes=true + +# Percent of ACTUAL usage of the underlying volume before no +# new volumes can be allocated to the volume destination. +# (floating point value) +#smbfs_used_ratio=0.95 + +# This will compare the allocated to available space on the +# volume destination. If the ratio exceeds this number, the +# destination will no longer be valid. (floating point value) +#smbfs_oversub_ratio=1.0 + +# Base dir containing mount points for smbfs shares. (string +# value) +#smbfs_mount_point_base=$state_path/mnt + +# Mount options passed to the smbfs client. See mount.cifs man +# page for details. (string value) +#smbfs_mount_options=noperm,file_mode=0775,dir_mode=0775 + + +# +# Options defined in cinder.volume.drivers.solidfire +# + +# Set 512 byte emulation on volume creation; (boolean value) +#sf_emulate_512=true + +# Allow tenants to specify QOS on create (boolean value) +#sf_allow_tenant_qos=false + +# Create SolidFire accounts with this prefix. Any string can +# be used here, but the string "hostname" is special and will +# create a prefix using the cinder node hostsname (previous +# default behavior). The default is NO prefix. (string value) +#sf_account_prefix=<None> + +# Account name on the SolidFire Cluster to use as owner of +# template/cache volumes (created if does not exist). (string +# value) +#sf_template_account_name=openstack-vtemplate + +# Create an internal cache of copy of images when a bootable +# volume is created to eliminate fetch from glance and qemu- +# conversion on subsequent calls. (boolean value) +#sf_allow_template_caching=true + +# SolidFire API port. Useful if the device api is behind a +# proxy on a different port. (integer value) +#sf_api_port=443 + + +# +# Options defined in cinder.volume.drivers.srb +# + +# Comma-separated list of REST servers IP to connect to. (eg +# http://IP1/,http://IP2:81/path (string value) +#srb_base_urls=<None> + + +# +# Options defined in cinder.volume.drivers.violin.v6000_common +# + +# IP address or hostname of mg-a (string value) +#gateway_mga=<None> + +# IP address or hostname of mg-b (string value) +#gateway_mgb=<None> + +# Use igroups to manage targets and initiators (boolean value) +#use_igroups=false + +# Global backend request timeout, in seconds (integer value) +#request_timeout=300 + + +# +# Options defined in cinder.volume.drivers.vmware.vmdk +# + +# IP address for connecting to VMware ESX/VC server. (string +# value) +#vmware_host_ip=<None> + +# Username for authenticating with VMware ESX/VC server. +# (string value) +#vmware_host_username=<None> + +# Password for authenticating with VMware ESX/VC server. +# (string value) +#vmware_host_password=<None> + +# Optional VIM service WSDL Location e.g +# http://<server>/vimService.wsdl. Optional over-ride to +# default location for bug work-arounds. (string value) +#vmware_wsdl_location=<None> + +# Number of times VMware ESX/VC server API must be retried +# upon connection related issues. (integer value) +#vmware_api_retry_count=10 + +# The interval (in seconds) for polling remote tasks invoked +# on VMware ESX/VC server. (floating point value) +#vmware_task_poll_interval=0.5 + +# Name for the folder in the VC datacenter that will contain +# cinder volumes. (string value) +#vmware_volume_folder=cinder-volumes + +# Timeout in seconds for VMDK volume transfer between Cinder +# and Glance. (integer value) +#vmware_image_transfer_timeout_secs=7200 + +# Max number of objects to be retrieved per batch. Query +# results will be obtained in batches from the server and not +# in one shot. Server may still limit the count to something +# less than the configured value. (integer value) +#vmware_max_objects_retrieval=100 + +# Optional string specifying the VMware VC server version. The +# driver attempts to retrieve the version from VMware VC +# server. Set this configuration only if you want to override +# the VC server version. (string value) +#vmware_host_version=<None> + +# Directory where virtual disks are stored during volume +# backup and restore. (string value) +#vmware_tmp_dir=/tmp + + +# +# Options defined in cinder.volume.drivers.windows.windows +# + +# Path to store VHD backed volumes (string value) +#windows_iscsi_lun_path=C:\iSCSIVirtualDisks + + +# +# Options defined in cinder.volume.drivers.xio +# + +# Default storage pool for volumes. (integer value) +#ise_storage_pool=1 + +# Raid level for ISE volumes. (integer value) +#ise_raid=1 + +# Number of retries (per port) when establishing connection to +# ISE management port. (integer value) +#ise_connection_retries=5 + +# Interval (secs) between retries. (integer value) +#ise_retry_interval=1 + +# Number on retries to get completion status after issuing a +# command to ISE. (integer value) +#ise_completion_retries=30 + + +# +# Options defined in cinder.volume.drivers.zfssa.zfssanfs +# + +# Data path IP address (string value) +#zfssa_data_ip=<None> + +# HTTPS port number (string value) +#zfssa_https_port=443 + +# Options to be passed while mounting share over nfs (string +# value) +#zfssa_nfs_mount_options= + +# Storage pool name. (string value) +#zfssa_nfs_pool= + +# Project name. (string value) +#zfssa_nfs_project=NFSProject + +# Share name. (string value) +#zfssa_nfs_share=nfs_share + +# Data compression. (string value) +#zfssa_nfs_share_compression=off + +# Synchronous write bias-latency, throughput. (string value) +#zfssa_nfs_share_logbias=latency + +# REST connection timeout. (seconds) (integer value) +#zfssa_rest_timeout=<None> + + +# +# Options defined in cinder.volume.manager +# + +# Driver to use for volume creation (string value) +volume_driver=cinder.volume.drivers.lvm.LVMISCSIDriver + +# Timeout for creating the volume to migrate to when +# performing volume migration (seconds) (integer value) +#migration_create_volume_timeout_secs=300 + +# Offload pending volume delete during volume service startup +# (boolean value) +#volume_service_inithost_offload=false + +# FC Zoning mode configured (string value) +#zoning_mode=none + +# User defined capabilities, a JSON formatted string +# specifying key/value pairs. The key/value pairs can be used +# by the CapabilitiesFilter to select between backends when +# requests specify volume types. For example, specifying a +# service level or the geographical location of a backend, +# then creating a volume type to allow the user to select by +# these different properties. (string value) +#extra_capabilities={} + + +[BRCD_FABRIC_EXAMPLE] + +# +# Options defined in cinder.zonemanager.drivers.brocade.brcd_fabric_opts +# + +# Management IP of fabric (string value) +#fc_fabric_address= + +# Fabric user ID (string value) +#fc_fabric_user= + +# Password for user (string value) +#fc_fabric_password= + +# Connecting port (integer value) +#fc_fabric_port=22 + +# overridden zoning policy (string value) +#zoning_policy=initiator-target + +# overridden zoning activation state (boolean value) +#zone_activate=true + +# overridden zone name prefix (string value) +#zone_name_prefix=<None> + +# Principal switch WWN of the fabric (string value) +#principal_switch_wwn=<None> + + +[CISCO_FABRIC_EXAMPLE] + +# +# Options defined in cinder.zonemanager.drivers.cisco.cisco_fabric_opts +# + +# Management IP of fabric (string value) +#cisco_fc_fabric_address= + +# Fabric user ID (string value) +#cisco_fc_fabric_user= + +# Password for user (string value) +#cisco_fc_fabric_password= + +# Connecting port (integer value) +#cisco_fc_fabric_port=22 + +# overridden zoning policy (string value) +#cisco_zoning_policy=initiator-target + +# overridden zoning activation state (boolean value) +#cisco_zone_activate=true + +# overridden zone name prefix (string value) +#cisco_zone_name_prefix=<None> + +# VSAN of the Fabric (string value) +#cisco_zoning_vsan=<None> + + +[database] + +# +# Options defined in oslo.db.concurrency +# + +# Enable the experimental use of thread pooling for all DB API +# calls (boolean value) +# Deprecated group/name - [DEFAULT]/dbapi_use_tpool +#use_tpool=false + +# The SQLAlchemy connection string to use to connect to the +# database. (string value) +connection=postgresql://{{ CINDER_DB_USER }}:{{ CINDER_DB_PASSWORD }}@{{ CONTROLLER_HOST_ADDRESS }}/cinder + + +[fc-zone-manager] + +# +# Options defined in cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver +# + +# Southbound connector for zoning operation (string value) +#brcd_sb_connector=cinder.zonemanager.drivers.brocade.brcd_fc_zone_client_cli.BrcdFCZoneClientCLI + + +# +# Options defined in cinder.zonemanager.drivers.cisco.cisco_fc_zone_driver +# + +# Southbound connector for zoning operation (string value) +#cisco_sb_connector=cinder.zonemanager.drivers.cisco.cisco_fc_zone_client_cli.CiscoFCZoneClientCLI + + +# +# Options defined in cinder.zonemanager.fc_zone_manager +# + +# FC Zone Driver responsible for zone management (string +# value) +#zone_driver=cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver.BrcdFCZoneDriver + +# Zoning policy configured by user; valid values include +# "initiator-target" or "initiator" (string value) +#zoning_policy=initiator-target + +# Comma separated list of Fibre Channel fabric names. This +# list of names is used to retrieve other SAN credentials for +# connecting to each SAN fabric (string value) +#fc_fabric_names=<None> + +# FC SAN Lookup Service (string value) +#fc_san_lookup_service=cinder.zonemanager.drivers.brocade.brcd_fc_san_lookup_service.BrcdFCSanLookupService + + +[keymgr] + +# +# Options defined in cinder.keymgr +# + +# The full class name of the key manager API class (string +# value) +#api_class=cinder.keymgr.conf_key_mgr.ConfKeyManager + + +# +# Options defined in cinder.keymgr.conf_key_mgr +# + +# Fixed key returned by key manager, specified in hex (string +# value) +#fixed_key=<None> + + +# +# Options defined in cinder.keymgr.key_mgr +# + +# Authentication url for encryption service. (string value) +#encryption_auth_url=http://localhost:5000/v3 + +# Url for encryption service. (string value) +#encryption_api_url=http://localhost:9311/v1 + + +[oslo_concurrency] + +lock_path = /var/lock/cinder + +[keystone_authtoken] + +# +# Options defined in keystonemiddleware.auth_token +# + +# Complete public Identity API endpoint. (string value) +auth_uri=http://{{ CONTROLLER_HOST_ADDRESS }}:5000/v2.0 + +# API version of the admin Identity API endpoint. (string +# value) +#auth_version=<None> + +# Do not handle authorization requests within the middleware, +# but delegate the authorization decision to downstream WSGI +# components. (boolean value) +#delay_auth_decision=false + +# Request timeout value for communicating with Identity API +# server. (integer value) +#http_connect_timeout=<None> + +# How many times are we trying to reconnect when communicating +# with Identity API Server. (integer value) +#http_request_max_retries=3 + +# Env key for the swift cache. (string value) +#cache=<None> + +# Required if identity server requires client certificate +# (string value) +#certfile=<None> + +# Required if identity server requires client certificate +# (string value) +#keyfile=<None> + +# A PEM encoded Certificate Authority to use when verifying +# HTTPs connections. Defaults to system CAs. (string value) +#cafile=<None> + +# Verify HTTPS connections. (boolean value) +#insecure=false + +# Directory used to cache files related to PKI tokens. (string +# value) +#signing_dir=<None> + +# Optionally specify a list of memcached server(s) to use for +# caching. If left undefined, tokens will instead be cached +# in-process. (list value) +# Deprecated group/name - [DEFAULT]/memcache_servers +#memcached_servers=<None> + +# In order to prevent excessive effort spent validating +# tokens, the middleware caches previously-seen tokens for a +# configurable duration (in seconds). Set to -1 to disable +# caching completely. (integer value) +#token_cache_time=300 + +# Determines the frequency at which the list of revoked tokens +# is retrieved from the Identity service (in seconds). A high +# number of revocation events combined with a low cache +# duration may significantly reduce performance. (integer +# value) +#revocation_cache_time=10 + +# (Optional) If defined, indicate whether token data should be +# authenticated or authenticated and encrypted. Acceptable +# values are MAC or ENCRYPT. If MAC, token data is +# authenticated (with HMAC) in the cache. If ENCRYPT, token +# data is encrypted and authenticated in the cache. If the +# value is not one of these options or empty, auth_token will +# raise an exception on initialization. (string value) +#memcache_security_strategy=<None> + +# (Optional, mandatory if memcache_security_strategy is +# defined) This string is used for key derivation. (string +# value) +#memcache_secret_key=<None> + +# (Optional) Number of seconds memcached server is considered +# dead before it is tried again. (integer value) +#memcache_pool_dead_retry=300 + +# (Optional) Maximum total number of open connections to every +# memcached server. (integer value) +#memcache_pool_maxsize=10 + +# (Optional) Socket timeout in seconds for communicating with +# a memcache server. (integer value) +#memcache_pool_socket_timeout=3 + +# (Optional) Number of seconds a connection to memcached is +# held unused in the pool before it is closed. (integer value) +#memcache_pool_unused_timeout=60 + +# (Optional) Number of seconds that an operation will wait to +# get a memcache client connection from the pool. (integer +# value) +#memcache_pool_conn_get_timeout=10 + +# (Optional) Use the advanced (eventlet safe) memcache client +# pool. The advanced pool will only work under python 2.x. +# (boolean value) +#memcache_use_advanced_pool=false + +# (Optional) Indicate whether to set the X-Service-Catalog +# header. If False, middleware will not ask for service +# catalog on token validation and will not set the X-Service- +# Catalog header. (boolean value) +#include_service_catalog=true + +# Used to control the use and type of token binding. Can be +# set to: "disabled" to not check token binding. "permissive" +# (default) to validate binding information if the bind type +# is of a form known to the server and ignore it if not. +# "strict" like "permissive" but if the bind type is unknown +# the token will be rejected. "required" any form of token +# binding is needed to be allowed. Finally the name of a +# binding method that must be present in tokens. (string +# value) +#enforce_token_bind=permissive + +# If true, the revocation list will be checked for cached +# tokens. This requires that PKI tokens are configured on the +# identity server. (boolean value) +#check_revocations_for_cached=false + +# Hash algorithms to use for hashing PKI tokens. This may be a +# single algorithm or multiple. The algorithms are those +# supported by Python standard hashlib.new(). The hashes will +# be tried in the order given, so put the preferred one first +# for performance. The result of the first hash will be stored +# in the cache. This will typically be set to multiple values +# only while migrating from a less secure algorithm to a more +# secure one. Once all the old tokens are expired this option +# should be set to a single value for better performance. +# (list value) +#hash_algorithms=md5 + + +[matchmaker_redis] + +# +# Options defined in oslo.messaging +# + +# Host to locate redis. (string value) +#host=127.0.0.1 + +# Use this port to connect to redis host. (integer value) +#port=6379 + +# Password for Redis server (optional). (string value) +#password=<None> + + +[matchmaker_ring] + +# +# Options defined in oslo.messaging +# + +# Matchmaker ring file (JSON). (string value) +# Deprecated group/name - [DEFAULT]/matchmaker_ringfile +#ringfile=/etc/oslo/matchmaker_ring.json + + +[oslo_messaging_amqp] + +# +# Options defined in oslo.messaging +# + +# address prefix used when sending to a specific server +# (string value) +#server_request_prefix=exclusive + +# address prefix used when broadcasting to all servers (string +# value) +#broadcast_prefix=broadcast + +# address prefix when sending to any server in group (string +# value) +#group_request_prefix=unicast + +# Name for the AMQP container (string value) +#container_name=<None> + +# Timeout for inactive connections (in seconds) (integer +# value) +#idle_timeout=0 + +# Debug: dump AMQP frames to stdout (boolean value) +#trace=false + +# CA certificate PEM file for verifing server certificate +# (string value) +#ssl_ca_file= + +# Identifying certificate PEM file to present to clients +# (string value) +#ssl_cert_file= + +# Private key PEM file used to sign cert_file certificate +# (string value) +#ssl_key_file= + +# Password for decrypting ssl_key_file (if encrypted) (string +# value) +#ssl_key_password=<None> + +# Accept clients using either SSL or plain TCP (boolean value) +#allow_insecure_clients=false + + +[oslo_messaging_qpid] + +# +# Options defined in oslo.messaging +# + +# Use durable queues in AMQP. (boolean value) +# Deprecated group/name - [DEFAULT]/rabbit_durable_queues +#amqp_durable_queues=false + +# Auto-delete queues in AMQP. (boolean value) +#amqp_auto_delete=false + +# Size of RPC connection pool. (integer value) +#rpc_conn_pool_size=30 + +# Qpid broker hostname. (string value) +#qpid_hostname=localhost + +# Qpid broker port. (integer value) +#qpid_port=5672 + +# Qpid HA cluster host:port pairs. (list value) +#qpid_hosts=$qpid_hostname:$qpid_port + +# Username for Qpid connection. (string value) +#qpid_username= + +# Password for Qpid connection. (string value) +#qpid_password= + +# Space separated list of SASL mechanisms to use for auth. +# (string value) +#qpid_sasl_mechanisms= + +# Seconds between connection keepalive heartbeats. (integer +# value) +#qpid_heartbeat=60 + +# Transport to use, either 'tcp' or 'ssl'. (string value) +#qpid_protocol=tcp + +# Whether to disable the Nagle algorithm. (boolean value) +#qpid_tcp_nodelay=true + +# The number of prefetched messages held by receiver. (integer +# value) +#qpid_receiver_capacity=1 + +# The qpid topology version to use. Version 1 is what was +# originally used by impl_qpid. Version 2 includes some +# backwards-incompatible changes that allow broker federation +# to work. Users should update to version 2 when they are +# able to take everything down, as it requires a clean break. +# (integer value) +#qpid_topology_version=1 + + +[oslo_messaging_rabbit] + +# +# Options defined in oslo.messaging +# + +# Use durable queues in AMQP. (boolean value) +# Deprecated group/name - [DEFAULT]/rabbit_durable_queues +#amqp_durable_queues=false + +# Auto-delete queues in AMQP. (boolean value) +#amqp_auto_delete=false + +# Size of RPC connection pool. (integer value) +#rpc_conn_pool_size=30 + +# SSL version to use (valid only if SSL enabled). Valid values +# are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may +# be available on some distributions. (string value) +#kombu_ssl_version= + +# SSL key file (valid only if SSL enabled). (string value) +#kombu_ssl_keyfile= + +# SSL cert file (valid only if SSL enabled). (string value) +#kombu_ssl_certfile= + +# SSL certification authority file (valid only if SSL +# enabled). (string value) +#kombu_ssl_ca_certs= + +# How long to wait before reconnecting in response to an AMQP +# consumer cancel notification. (floating point value) +#kombu_reconnect_delay=1.0 + +# The RabbitMQ broker address where a single node is used. +# (string value) +rabbit_host={{ RABBITMQ_HOST }} + +# The RabbitMQ broker port where a single node is used. +# (integer value) +rabbit_port={{ RABBITMQ_PORT }} + +# RabbitMQ HA cluster host:port pairs. (list value) +rabbit_hosts=$rabbit_host:$rabbit_port + +# Connect over SSL for RabbitMQ. (boolean value) +#rabbit_use_ssl=false + +# The RabbitMQ userid. (string value) +rabbit_userid={{ RABBITMQ_USER }} + +# The RabbitMQ password. (string value) +rabbit_password={{ RABBITMQ_PASSWORD }} + +# The RabbitMQ login method. (string value) +#rabbit_login_method=AMQPLAIN + +# The RabbitMQ virtual host. (string value) +#rabbit_virtual_host=/ + +# How frequently to retry connecting with RabbitMQ. (integer +# value) +#rabbit_retry_interval=1 + +# How long to backoff for between retries when connecting to +# RabbitMQ. (integer value) +#rabbit_retry_backoff=2 + +# Maximum number of RabbitMQ connection retries. Default is 0 +# (infinite retry count). (integer value) +#rabbit_max_retries=0 + +# Use HA queues in RabbitMQ (x-ha-policy: all). If you change +# this option, you must wipe the RabbitMQ database. (boolean +# value) +#rabbit_ha_queues=false + +# Number of seconds after which the Rabbit broker is +# considered down if heartbeat's keep-alive fails (0 disables +# the heartbeat, >0 enables it. Enabling heartbeats requires +# kombu>=3.0.7 and amqp>=1.4.0). EXPERIMENTAL (integer value) +#heartbeat_timeout_threshold=0 + +# How often times during the heartbeat_timeout_threshold we +# check the heartbeat. (integer value) +#heartbeat_rate=2 + +# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake +# (boolean value) +#fake_rabbit=false + + +[profiler] + +# +# Options defined in cinder.service +# + +# If False fully disable profiling feature. (boolean value) +#profiler_enabled=false + +# If False doesn't trace SQL requests. (boolean value) +#trace_sqlalchemy=false + + +[DEFAULT] + + +[keystone_authtoken] + +# +# From keystonemiddleware.auth_token +# + +# Complete public Identity API endpoint. (string value) +#auth_uri = <None> + +# API version of the admin Identity API endpoint. (string value) +#auth_version = <None> + +# Do not handle authorization requests within the middleware, but +# delegate the authorization decision to downstream WSGI components. +# (boolean value) +#delay_auth_decision = false + +# Request timeout value for communicating with Identity API server. +# (integer value) +#http_connect_timeout = <None> + +# How many times are we trying to reconnect when communicating with +# Identity API Server. (integer value) +#http_request_max_retries = 3 + +# Env key for the swift cache. (string value) +#cache = <None> + +# Required if identity server requires client certificate (string +# value) +#certfile = <None> + +# Required if identity server requires client certificate (string +# value) +#keyfile = <None> + +# A PEM encoded Certificate Authority to use when verifying HTTPs +# connections. Defaults to system CAs. (string value) +#cafile = <None> + +# Verify HTTPS connections. (boolean value) +#insecure = false + +# Directory used to cache files related to PKI tokens. (string value) +#signing_dir = <None> + +# Optionally specify a list of memcached server(s) to use for caching. +# If left undefined, tokens will instead be cached in-process. (list +# value) +# Deprecated group/name - [DEFAULT]/memcache_servers +#memcached_servers = <None> + +# In order to prevent excessive effort spent validating tokens, the +# middleware caches previously-seen tokens for a configurable duration +# (in seconds). Set to -1 to disable caching completely. (integer +# value) +#token_cache_time = 300 + +# Determines the frequency at which the list of revoked tokens is +# retrieved from the Identity service (in seconds). A high number of +# revocation events combined with a low cache duration may +# significantly reduce performance. (integer value) +#revocation_cache_time = 10 + +# (Optional) If defined, indicate whether token data should be +# authenticated or authenticated and encrypted. Acceptable values are +# MAC or ENCRYPT. If MAC, token data is authenticated (with HMAC) in +# the cache. If ENCRYPT, token data is encrypted and authenticated in +# the cache. If the value is not one of these options or empty, +# auth_token will raise an exception on initialization. (string value) +#memcache_security_strategy = <None> + +# (Optional, mandatory if memcache_security_strategy is defined) This +# string is used for key derivation. (string value) +#memcache_secret_key = <None> + +# (Optional) Number of seconds memcached server is considered dead +# before it is tried again. (integer value) +#memcache_pool_dead_retry = 300 + +# (Optional) Maximum total number of open connections to every +# memcached server. (integer value) +#memcache_pool_maxsize = 10 + +# (Optional) Socket timeout in seconds for communicating with a +# memcache server. (integer value) +#memcache_pool_socket_timeout = 3 + +# (Optional) Number of seconds a connection to memcached is held +# unused in the pool before it is closed. (integer value) +#memcache_pool_unused_timeout = 60 + +# (Optional) Number of seconds that an operation will wait to get a +# memcache client connection from the pool. (integer value) +#memcache_pool_conn_get_timeout = 10 + +# (Optional) Use the advanced (eventlet safe) memcache client pool. +# The advanced pool will only work under python 2.x. (boolean value) +#memcache_use_advanced_pool = false + +# (Optional) Indicate whether to set the X-Service-Catalog header. If +# False, middleware will not ask for service catalog on token +# validation and will not set the X-Service-Catalog header. (boolean +# value) +#include_service_catalog = true + +# Used to control the use and type of token binding. Can be set to: +# "disabled" to not check token binding. "permissive" (default) to +# validate binding information if the bind type is of a form known to +# the server and ignore it if not. "strict" like "permissive" but if +# the bind type is unknown the token will be rejected. "required" any +# form of token binding is needed to be allowed. Finally the name of a +# binding method that must be present in tokens. (string value) +#enforce_token_bind = permissive + +# If true, the revocation list will be checked for cached tokens. This +# requires that PKI tokens are configured on the identity server. +# (boolean value) +#check_revocations_for_cached = false + +# Hash algorithms to use for hashing PKI tokens. This may be a single +# algorithm or multiple. The algorithms are those supported by Python +# standard hashlib.new(). The hashes will be tried in the order given, +# so put the preferred one first for performance. The result of the +# first hash will be stored in the cache. This will typically be set +# to multiple values only while migrating from a less secure algorithm +# to a more secure one. Once all the old tokens are expired this +# option should be set to a single value for better performance. (list +# value) +#hash_algorithms = md5 + +# Prefix to prepend at the beginning of the path. Deprecated, use +# identity_uri. (string value) +#auth_admin_prefix = + +# Host providing the admin Identity API endpoint. Deprecated, use +# identity_uri. (string value) +#auth_host = 127.0.0.1 + +# Port of the admin Identity API endpoint. Deprecated, use +# identity_uri. (integer value) +#auth_port = 35357 + +# Protocol of the admin Identity API endpoint (http or https). +# Deprecated, use identity_uri. (string value) +#auth_protocol = https + +# Complete admin Identity API endpoint. This should specify the +# unversioned root endpoint e.g. https://localhost:35357/ (string +# value) +identity_uri = http://{{ CONTROLLER_HOST_ADDRESS }}:35357 + +# This option is deprecated and may be removed in a future release. +# Single shared secret with the Keystone configuration used for +# bootstrapping a Keystone installation, or otherwise bypassing the +# normal authentication process. This option should not be used, use +# `admin_user` and `admin_password` instead. (string value) +#admin_token = <None> + +# Service username. (string value) +admin_user = {{ CINDER_SERVICE_USER }} + +# Service user password. (string value) +admin_password = {{ CINDER_SERVICE_PASSWORD }} + +# Service tenant name. (string value) +admin_tenant_name = service |