diff options
Diffstat (limited to 'install-files/openstack/usr/share/openstack/cinder/cinder.conf')
| -rw-r--r-- | install-files/openstack/usr/share/openstack/cinder/cinder.conf | 2991 |
1 files changed, 0 insertions, 2991 deletions
diff --git a/install-files/openstack/usr/share/openstack/cinder/cinder.conf b/install-files/openstack/usr/share/openstack/cinder/cinder.conf deleted file mode 100644 index f3e4f11c..00000000 --- a/install-files/openstack/usr/share/openstack/cinder/cinder.conf +++ /dev/null @@ -1,2991 +0,0 @@ -[DEFAULT] - -use_syslog = True - -# -# Options defined in oslo.messaging -# - -# ZeroMQ bind address. Should be a wildcard (*), an ethernet -# interface, or IP. The "host" option should point or resolve -# to this address. (string value) -#rpc_zmq_bind_address=* - -# MatchMaker driver. (string value) -#rpc_zmq_matchmaker=local - -# ZeroMQ receiver listening port. (integer value) -#rpc_zmq_port=9501 - -# Number of ZeroMQ contexts, defaults to 1. (integer value) -#rpc_zmq_contexts=1 - -# Maximum number of ingress messages to locally buffer per -# topic. Default is unlimited. (integer value) -#rpc_zmq_topic_backlog=<None> - -# Directory for holding IPC sockets. (string value) -#rpc_zmq_ipc_dir=/var/run/openstack - -# Name of this node. Must be a valid hostname, FQDN, or IP -# address. Must match "host" option, if running Nova. (string -# value) -#rpc_zmq_host=cinder - -# Seconds to wait before a cast expires (TTL). Only supported -# by impl_zmq. (integer value) -#rpc_cast_timeout=30 - -# Heartbeat frequency. (integer value) -#matchmaker_heartbeat_freq=300 - -# Heartbeat time-to-live. (integer value) -#matchmaker_heartbeat_ttl=600 - -# Size of RPC thread pool. (integer value) -#rpc_thread_pool_size=64 - -# Driver or drivers to handle sending notifications. (multi -# valued) -notification_driver=messagingv2 - -# AMQP topic used for OpenStack notifications. (list value) -# Deprecated group/name - [rpc_notifier2]/topics -#notification_topics=notifications - -# Seconds to wait for a response from a call. (integer value) -#rpc_response_timeout=60 - -# A URL representing the messaging driver to use and its full -# configuration. If not set, we fall back to the rpc_backend -# option and driver specific configuration. (string value) -#transport_url=<None> - -# The messaging driver to use, defaults to rabbit. Other -# drivers include qpid and zmq. (string value) -rpc_backend=rabbit - -# The default exchange under which topics are scoped. May be -# overridden by an exchange name specified in the -# transport_url option. (string value) -control_exchange=cinder - - -# -# Options defined in cinder.exception -# - -# Make exception message format errors fatal. (boolean value) -#fatal_exception_format_errors=false - - -# -# Options defined in cinder.quota -# - -# Number of volumes allowed per project (integer value) -#quota_volumes=10 - -# Number of volume snapshots allowed per project (integer -# value) -#quota_snapshots=10 - -# Number of consistencygroups allowed per project (integer -# value) -#quota_consistencygroups=10 - -# Total amount of storage, in gigabytes, allowed for volumes -# and snapshots per project (integer value) -#quota_gigabytes=1000 - -# Number of volume backups allowed per project (integer value) -#quota_backups=10 - -# Total amount of storage, in gigabytes, allowed for backups -# per project (integer value) -#quota_backup_gigabytes=1000 - -# Number of seconds until a reservation expires (integer -# value) -#reservation_expire=86400 - -# Count of reservations until usage is refreshed (integer -# value) -#until_refresh=0 - -# Number of seconds between subsequent usage refreshes -# (integer value) -#max_age=0 - -# Default driver to use for quota checks (string value) -#quota_driver=cinder.quota.DbQuotaDriver - -# Enables or disables use of default quota class with default -# quota. (boolean value) -#use_default_quota_class=true - - -# -# Options defined in cinder.service -# - -# Interval, in seconds, between nodes reporting state to -# datastore (integer value) -#report_interval=10 - -# Interval, in seconds, between running periodic tasks -# (integer value) -#periodic_interval=60 - -# Range, in seconds, to randomly delay when starting the -# periodic task scheduler to reduce stampeding. (Disable by -# setting to 0) (integer value) -#periodic_fuzzy_delay=60 - -# IP address on which OpenStack Volume API listens (string -# value) -#osapi_volume_listen=0.0.0.0 - -# Port on which OpenStack Volume API listens (integer value) -#osapi_volume_listen_port=8776 - -# Number of workers for OpenStack Volume API service. The -# default is equal to the number of CPUs available. (integer -# value) -#osapi_volume_workers=<None> - - -# -# Options defined in cinder.ssh_utils -# - -# Option to enable strict host key checking. When set to -# "True" Cinder will only connect to systems with a host key -# present in the configured "ssh_hosts_key_file". When set to -# "False" the host key will be saved upon first connection and -# used for subsequent connections. Default=False (boolean -# value) -#strict_ssh_host_key_policy=false - -# File containing SSH host keys for the systems with which -# Cinder needs to communicate. OPTIONAL: -# Default=$state_path/ssh_known_hosts (string value) -#ssh_hosts_key_file=$state_path/ssh_known_hosts - - -# -# Options defined in cinder.test -# - -# File name of clean sqlite db (string value) -#sqlite_clean_db=clean.sqlite - - -# -# Options defined in cinder.wsgi -# - -# Maximum line size of message headers to be accepted. -# max_header_line may need to be increased when using large -# tokens (typically those generated by the Keystone v3 API -# with big service catalogs). (integer value) -#max_header_line=16384 - -# Timeout for client connections' socket operations. If an -# incoming connection is idle for this number of seconds it -# will be closed. A value of '0' means wait forever. (integer -# value) -#client_socket_timeout=900 - -# If False, closes the client socket connection explicitly. -# Setting it to True to maintain backward compatibility. -# Recommended setting is set it to False. (boolean value) -#wsgi_keep_alive=true - -# Sets the value of TCP_KEEPALIVE (True/False) for each server -# socket. (boolean value) -#tcp_keepalive=true - -# Sets the value of TCP_KEEPIDLE in seconds for each server -# socket. Not supported on OS X. (integer value) -#tcp_keepidle=600 - -# Sets the value of TCP_KEEPINTVL in seconds for each server -# socket. Not supported on OS X. (integer value) -#tcp_keepalive_interval=<None> - -# Sets the value of TCP_KEEPCNT for each server socket. Not -# supported on OS X. (integer value) -#tcp_keepalive_count=<None> - -# CA certificate file to use to verify connecting clients -# (string value) -#ssl_ca_file=<None> - -# Certificate file to use when starting the server securely -# (string value) -#ssl_cert_file=<None> - -# Private key file to use when starting the server securely -# (string value) -#ssl_key_file=<None> - - -# -# Options defined in cinder.api.common -# - -# The maximum number of items that a collection resource -# returns in a single response (integer value) -#osapi_max_limit=1000 - -# Base URL that will be presented to users in links to the -# OpenStack Volume API (string value) -# Deprecated group/name - [DEFAULT]/osapi_compute_link_prefix -#osapi_volume_base_URL=<None> - - -# -# Options defined in cinder.api.middleware.auth -# - -# Treat X-Forwarded-For as the canonical remote address. Only -# enable this if you have a sanitizing proxy. (boolean value) -#use_forwarded_for=false - - -# -# Options defined in cinder.api.middleware.sizelimit -# - -# Max size for body of a request (integer value) -#osapi_max_request_body_size=114688 - - -# -# Options defined in cinder.api.views.versions -# - -# Public url to use for versions endpoint. The default is -# None, which will use the request's host_url attribute to -# populate the URL base. If Cinder is operating behind a -# proxy, you will want to change this to represent the proxy's -# URL. (string value) -#public_endpoint=<None> - - -# -# Options defined in cinder.backup.chunkeddriver -# - -# Compression algorithm (None to disable) (string value) -#backup_compression_algorithm=zlib - - -# -# Options defined in cinder.backup.driver -# - -# Backup metadata version to be used when backing up volume -# metadata. If this number is bumped, make sure the service -# doing the restore supports the new version. (integer value) -#backup_metadata_version=2 - -# The number of chunks or objects, for which one Ceilometer -# notification will be sent (integer value) -#backup_object_number_per_notification=10 - -# Interval, in seconds, between two progress notifications -# reporting the backup status (integer value) -#backup_timer_interval=120 - - -# -# Options defined in cinder.backup.drivers.ceph -# - -# Ceph configuration file to use. (string value) -#backup_ceph_conf=/etc/ceph/ceph.conf - -# The Ceph user to connect with. Default here is to use the -# same user as for Cinder volumes. If not using cephx this -# should be set to None. (string value) -#backup_ceph_user=cinder - -# The chunk size, in bytes, that a backup is broken into -# before transfer to the Ceph object store. (integer value) -#backup_ceph_chunk_size=134217728 - -# The Ceph pool where volume backups are stored. (string -# value) -#backup_ceph_pool=backups - -# RBD stripe unit to use when creating a backup image. -# (integer value) -#backup_ceph_stripe_unit=0 - -# RBD stripe count to use when creating a backup image. -# (integer value) -#backup_ceph_stripe_count=0 - -# If True, always discard excess bytes when restoring volumes -# i.e. pad with zeroes. (boolean value) -#restore_discard_excess_bytes=true - - -# -# Options defined in cinder.backup.drivers.nfs -# - -# The maximum size in bytes of the files used to hold backups. -# If the volume being backed up exceeds this size, then it -# will be backed up into multiple files. (integer value) -#backup_file_size=1999994880 - -# The size in bytes that changes are tracked for incremental -# backups. backup_swift_object_size has to be multiple of -# backup_swift_block_size. (integer value) -#backup_sha_block_size_bytes=32768 - -# Enable or Disable the timer to send the periodic progress -# notifications to Ceilometer when backing up the volume to -# the backend storage. The default value is True to enable the -# timer. (boolean value) -#backup_enable_progress_timer=true - -# Base dir containing mount point for NFS share. (string -# value) -#backup_mount_point_base=$state_path/backup_mount - -# NFS share in fqdn:path, ipv4addr:path, or "[ipv6addr]:path" -# format. (string value) -#backup_share=<None> - -# Mount options passed to the NFS client. See NFS man page for -# details. (string value) -#backup_mount_options=<None> - -# Custom container to use for backups. (string value) -#backup_container=<None> - - -# -# Options defined in cinder.backup.drivers.swift -# - -# The URL of the Swift endpoint (string value) -#backup_swift_url=<None> - -# Info to match when looking for swift in the service catalog. -# Format is: separated values of the form: -# <service_type>:<service_name>:<endpoint_type> - Only used if -# backup_swift_url is unset (string value) -#swift_catalog_info=object-store:swift:publicURL - -# Swift authentication mechanism (string value) -#backup_swift_auth=per_user - -# Swift authentication version. Specify "1" for auth 1.0, or -# "2" for auth 2.0 (string value) -#backup_swift_auth_version=1 - -# Swift tenant/account name. Required when connecting to an -# auth 2.0 system (string value) -#backup_swift_tenant=<None> - -# Swift user name (string value) -#backup_swift_user=<None> - -# Swift key for authentication (string value) -#backup_swift_key=<None> - -# The default Swift container to use (string value) -#backup_swift_container=volumebackups - -# The size in bytes of Swift backup objects (integer value) -#backup_swift_object_size=52428800 - -# The size in bytes that changes are tracked for incremental -# backups. backup_swift_object_size has to be multiple of -# backup_swift_block_size. (integer value) -#backup_swift_block_size=32768 - -# The number of retries to make for Swift operations (integer -# value) -#backup_swift_retry_attempts=3 - -# The backoff time in seconds between Swift retries (integer -# value) -#backup_swift_retry_backoff=2 - -# Enable or Disable the timer to send the periodic progress -# notifications to Ceilometer when backing up the volume to -# the Swift backend storage. The default value is True to -# enable the timer. (boolean value) -#backup_swift_enable_progress_timer=true - - -# -# Options defined in cinder.backup.drivers.tsm -# - -# Volume prefix for the backup id when backing up to TSM -# (string value) -#backup_tsm_volume_prefix=backup - -# TSM password for the running username (string value) -#backup_tsm_password=password - -# Enable or Disable compression for backups (boolean value) -#backup_tsm_compression=true - - -# -# Options defined in cinder.backup.manager -# - -# Driver to use for backups. (string value) -# Deprecated group/name - [DEFAULT]/backup_service -#backup_driver=cinder.backup.drivers.swift - - -# -# Options defined in cinder.cmd.volume -# - -# Backend override of host value. (string value) -# Deprecated group/name - [DEFAULT]/host -#backend_host=<None> - - -# -# Options defined in cinder.cmd.volume_usage_audit -# - -# If this option is specified then the start time specified is -# used instead of the start time of the last completed audit -# period. (string value) -#start_time=<None> - -# If this option is specified then the end time specified is -# used instead of the end time of the last completed audit -# period. (string value) -#end_time=<None> - -# Send the volume and snapshot create and delete notifications -# generated in the specified period. (boolean value) -#send_actions=false - - -# -# Options defined in cinder.common.config -# - -# File name for the paste.deploy config for cinder-api (string -# value) -api_paste_config=api-paste.ini - -# Top-level directory for maintaining cinder's state (string -# value) -# Deprecated group/name - [DEFAULT]/pybasedir -state_path=/var/lib/cinder - -# IP address of this host (string value) -my_ip={{ MANAGEMENT_INTERFACE_IP_ADDRESS }} - -# Default glance host name or IP (string value) -glance_host={{ CONTROLLER_HOST_ADDRESS }} - -# Default glance port (integer value) -#glance_port=9292 - -# A list of the glance API servers available to cinder -# ([hostname|ip]:port) (list value) -#glance_api_servers=$glance_host:$glance_port - -# Version of the glance API to use (integer value) -#glance_api_version=1 - -# Number retries when downloading an image from glance -# (integer value) -#glance_num_retries=0 - -# Allow to perform insecure SSL (https) requests to glance -# (boolean value) -#glance_api_insecure=false - -# Enables or disables negotiation of SSL layer compression. In -# some cases disabling compression can improve data -# throughput, such as when high network bandwidth is available -# and you use compressed image formats like qcow2. (boolean -# value) -#glance_api_ssl_compression=false - -# Location of ca certificates file to use for glance client -# requests. (string value) -#glance_ca_certificates_file=<None> - -# http/https timeout value for glance operations. If no value -# (None) is supplied here, the glanceclient default value is -# used. (integer value) -#glance_request_timeout=<None> - -# The topic that scheduler nodes listen on (string value) -#scheduler_topic=cinder-scheduler - -# The topic that volume nodes listen on (string value) -#volume_topic=cinder-volume - -# The topic that volume backup nodes listen on (string value) -#backup_topic=cinder-backup - -# DEPRECATED: Deploy v1 of the Cinder API. (boolean value) -#enable_v1_api=true - -# Deploy v2 of the Cinder API. (boolean value) -#enable_v2_api=true - -# Enables or disables rate limit of the API. (boolean value) -#api_rate_limit=true - -# Specify list of extensions to load when using -# osapi_volume_extension option with -# cinder.api.contrib.select_extensions (list value) -#osapi_volume_ext_list= - -# osapi volume extension to load (multi valued) -#osapi_volume_extension=cinder.api.contrib.standard_extensions - -# Full class name for the Manager for volume (string value) -#volume_manager=cinder.volume.manager.VolumeManager - -# Full class name for the Manager for volume backup (string -# value) -#backup_manager=cinder.backup.manager.BackupManager - -# Full class name for the Manager for scheduler (string value) -#scheduler_manager=cinder.scheduler.manager.SchedulerManager - -# Name of this node. This can be an opaque identifier. It is -# not necessarily a host name, FQDN, or IP address. (string -# value) -#host=cinder - -# Availability zone of this node (string value) -#storage_availability_zone=nova - -# Default availability zone for new volumes. If not set, the -# storage_availability_zone option value is used as the -# default for new volumes. (string value) -#default_availability_zone=<None> - -# Default volume type to use (string value) -#default_volume_type=<None> - -# Time period for which to generate volume usages. The options -# are hour, day, month, or year. (string value) -#volume_usage_audit_period=month - -# Path to the rootwrap configuration file to use for running -# commands as root (string value) -rootwrap_config=/etc/cinder/rootwrap.conf - -# Enable monkey patching (boolean value) -#monkey_patch=false - -# List of modules/decorators to monkey patch (list value) -#monkey_patch_modules= - -# Maximum time since last check-in for a service to be -# considered up (integer value) -#service_down_time=60 - -# The full class name of the volume API class to use (string -# value) -#volume_api_class=cinder.volume.api.API - -# The full class name of the volume backup API class (string -# value) -#backup_api_class=cinder.backup.api.API - -# The strategy to use for auth. Supports noauth, keystone, and -# deprecated. (string value) -auth_strategy=keystone - -# A list of backend names to use. These backend names should -# be backed by a unique [CONFIG] group with its options (list -# value) -#enabled_backends=<None> - -# Whether snapshots count against gigabyte quota (boolean -# value) -#no_snapshot_gb_quota=false - -# The full class name of the volume transfer API class (string -# value) -#transfer_api_class=cinder.transfer.api.API - -# The full class name of the volume replication API class -# (string value) -#replication_api_class=cinder.replication.api.API - -# The full class name of the consistencygroup API class -# (string value) -#consistencygroup_api_class=cinder.consistencygroup.api.API - -# OpenStack privileged account username. Used for requests to -# other services (such as Nova) that require an account with -# special rights. (string value) -#os_privileged_user_name=<None> - -# Password associated with the OpenStack privileged account. -# (string value) -#os_privileged_user_password=<None> - -# Tenant name associated with the OpenStack privileged -# account. (string value) -#os_privileged_user_tenant=<None> - - -# -# Options defined in cinder.compute -# - -# The full class name of the compute API class to use (string -# value) -#compute_api_class=cinder.compute.nova.API - - -# -# Options defined in cinder.compute.nova -# - -# Match this value when searching for nova in the service -# catalog. Format is: separated values of the form: -# <service_type>:<service_name>:<endpoint_type> (string value) -#nova_catalog_info=compute:Compute Service:publicURL - -# Same as nova_catalog_info, but for admin endpoint. (string -# value) -#nova_catalog_admin_info=compute:Compute Service:adminURL - -# Override service catalog lookup with template for nova -# endpoint e.g. http://localhost:8774/v2/%(project_id)s -# (string value) -#nova_endpoint_template=<None> - -# Same as nova_endpoint_template, but for admin endpoint. -# (string value) -#nova_endpoint_admin_template=<None> - -# Region name of this node (string value) -#os_region_name=<None> - -# Location of ca certificates file to use for nova client -# requests. (string value) -#nova_ca_certificates_file=<None> - -# Allow to perform insecure SSL requests to nova (boolean -# value) -#nova_api_insecure=false - - -# -# Options defined in cinder.db.api -# - -# Services to be added to the available pool on create -# (boolean value) -#enable_new_services=true - -# Template string to be used to generate volume names (string -# value) -volume_name_template=volume-%s - -# Template string to be used to generate snapshot names -# (string value) -snapshot_name_template=snapshot-%s - -# Template string to be used to generate backup names (string -# value) -backup_name_template=backup-%s - - -# -# Options defined in cinder.db.base -# - -# Driver to use for database access (string value) -#db_driver=cinder.db - - -# -# Options defined in cinder.image.glance -# - -# Default core properties of image (list value) -#glance_core_properties=checksum,container_format,disk_format,image_name,image_id,min_disk,min_ram,name,size - -# A list of url schemes that can be downloaded directly via -# the direct_url. Currently supported schemes: [file]. (list -# value) -#allowed_direct_url_schemes= - - -# -# Options defined in cinder.image.image_utils -# - -# Directory used for temporary storage during image conversion -# (string value) -#image_conversion_dir=$state_path/conversion - - -# -# Options defined in cinder.openstack.common.eventlet_backdoor -# - -# Enable eventlet backdoor. Acceptable values are 0, <port>, -# and <start>:<end>, where 0 results in listening on a random -# tcp port number; <port> results in listening on the -# specified port number (and not enabling backdoor if that -# port is in use); and <start>:<end> results in listening on -# the smallest unused port number within the specified range -# of port numbers. The chosen port is displayed in the -# service's log file. (string value) -#backdoor_port=<None> - - -# -# Options defined in cinder.openstack.common.periodic_task -# - -# Some periodic tasks can be run in a separate process. Should -# we run them here? (boolean value) -#run_external_periodic_tasks=true - - -# -# Options defined in cinder.openstack.common.policy -# - -# The JSON file that defines policies. (string value) -#policy_file=policy.json - -# Default rule. Enforced when a requested rule is not found. -# (string value) -#policy_default_rule=default - -# Directories where policy configuration files are stored. -# They can be relative to any directory in the search path -# defined by the config_dir option, or absolute paths. The -# file defined by policy_file must exist for these directories -# to be searched. Missing or empty directories are ignored. -# (multi valued) -#policy_dirs=policy.d - - -# -# Options defined in cinder.openstack.common.versionutils -# - -# Enables or disables fatal status of deprecations. (boolean -# value) -#fatal_deprecations=false - - -# -# Options defined in cinder.scheduler.driver -# - -# The scheduler host manager class to use (string value) -#scheduler_host_manager=cinder.scheduler.host_manager.HostManager - -# Maximum number of attempts to schedule an volume (integer -# value) -#scheduler_max_attempts=3 - - -# -# Options defined in cinder.scheduler.host_manager -# - -# Which filter class names to use for filtering hosts when not -# specified in the request. (list value) -#scheduler_default_filters=AvailabilityZoneFilter,CapacityFilter,CapabilitiesFilter - -# Which weigher class names to use for weighing hosts. (list -# value) -#scheduler_default_weighers=CapacityWeigher - - -# -# Options defined in cinder.scheduler.manager -# - -# Default scheduler driver to use (string value) -#scheduler_driver=cinder.scheduler.filter_scheduler.FilterScheduler - - -# -# Options defined in cinder.scheduler.scheduler_options -# - -# Absolute path to scheduler configuration JSON file. (string -# value) -#scheduler_json_config_location= - - -# -# Options defined in cinder.scheduler.simple -# - -# This configure option has been deprecated along with the -# SimpleScheduler. New scheduler is able to gather capacity -# information for each host, thus setting the maximum number -# of volume gigabytes for host is no longer needed. It's safe -# to remove this configure from cinder.conf. (integer value) -#max_gigabytes=10000 - - -# -# Options defined in cinder.scheduler.weights.capacity -# - -# Multiplier used for weighing volume capacity. Negative -# numbers mean to stack vs spread. (floating point value) -#capacity_weight_multiplier=1.0 - -# Multiplier used for weighing volume capacity. Negative -# numbers mean to stack vs spread. (floating point value) -#allocated_capacity_weight_multiplier=-1.0 - - -# -# Options defined in cinder.scheduler.weights.volume_number -# - -# Multiplier used for weighing volume number. Negative numbers -# mean to spread vs stack. (floating point value) -#volume_number_multiplier=-1.0 - - -# -# Options defined in cinder.transfer.api -# - -# The number of characters in the salt. (integer value) -#volume_transfer_salt_length=8 - -# The number of characters in the autogenerated auth key. -# (integer value) -#volume_transfer_key_length=16 - - -# -# Options defined in cinder.volume.api -# - -# Cache volume availability zones in memory for the provided -# duration in seconds (integer value) -#az_cache_duration=3600 - -# Create volume from snapshot at the host where snapshot -# resides (boolean value) -#snapshot_same_host=true - -# Ensure that the new volumes are the same AZ as snapshot or -# source volume (boolean value) -#cloned_volume_same_az=true - - -# -# Options defined in cinder.volume.driver -# - -# The maximum number of times to rescan iSER targetto find -# volume (integer value) -#num_iser_scan_tries=3 - -# This option is deprecated and unused. It will be removed in -# the Liberty release. (integer value) -#iser_num_targets=<None> - -# Prefix for iSER volumes (string value) -#iser_target_prefix=iqn.2010-10.org.openstack: - -# The IP address that the iSER daemon is listening on (string -# value) -#iser_ip_address=$my_ip - -# The port that the iSER daemon is listening on (integer -# value) -#iser_port=3260 - -# The name of the iSER target user-land tool to use (string -# value) -#iser_helper=tgtadm - -# Number of times to attempt to run flakey shell commands -# (integer value) -#num_shell_tries=3 - -# The percentage of backend capacity is reserved (integer -# value) -#reserved_percentage=0 - -# This option is deprecated and unused. It will be removed in -# the Liberty release. (integer value) -#iscsi_num_targets=<None> - -# Prefix for iSCSI volumes (string value) -#iscsi_target_prefix=iqn.2010-10.org.openstack: - -# The IP address that the iSCSI daemon is listening on (string -# value) -iscsi_ip_address={{ MANAGEMENT_INTERFACE_IP_ADDRESS }} - -# The list of secondary IP addresses of the iSCSI daemon (list -# value) -#iscsi_secondary_ip_addresses= - -# The port that the iSCSI daemon is listening on (integer -# value) -iscsi_port=3260 - -# The maximum number of times to rescan targets to find volume -# (integer value) -# Deprecated group/name - [DEFAULT]/num_iscsi_scan_tries -#num_volume_device_scan_tries=3 - -# The backend name for a given driver implementation (string -# value) -volume_backend_name=LVM_iSCSI - -# Do we attach/detach volumes in cinder using multipath for -# volume to image and image to volume transfers? (boolean -# value) -#use_multipath_for_image_xfer=false - -# If this is set to True, attachment of volumes for image -# transfer will be aborted when multipathd is not running. -# Otherwise, it will fallback to single path. (boolean value) -#enforce_multipath_for_image_xfer=false - -# Method used to wipe old volumes (string value) -volume_clear=zero - -# Size in MiB to wipe at start of old volumes. 0 => all -# (integer value) -volume_clear_size=50 - -# The flag to pass to ionice to alter the i/o priority of the -# process used to zero a volume after deletion, for example -# "-c3" for idle only priority. (string value) -#volume_clear_ionice=<None> - -# iSCSI target user-land tool to use. tgtadm is default, use -# lioadm for LIO iSCSI support, scstadmin for SCST target -# support, iseradm for the ISER protocol, ietadm for iSCSI -# Enterprise Target, iscsictl for Chelsio iSCSI Target or fake -# for testing. (string value) -iscsi_helper=lioadm - -# Volume configuration file storage directory (string value) -volumes_dir=$state_path/volumes - -# IET configuration file (string value) -#iet_conf=/etc/iet/ietd.conf - -# Chiscsi (CXT) global defaults configuration file (string -# value) -#chiscsi_conf=/etc/chelsio-iscsi/chiscsi.conf - -# This option is deprecated and unused. It will be removed in -# the next release. (string value) -#lio_initiator_iqns= - -# Sets the behavior of the iSCSI target to either perform -# blockio or fileio optionally, auto can be set and Cinder -# will autodetect type of backing device (string value) -#iscsi_iotype=fileio - -# The default block size used when copying/clearing volumes -# (string value) -#volume_dd_blocksize=1M - -# The blkio cgroup name to be used to limit bandwidth of -# volume copy (string value) -#volume_copy_blkio_cgroup_name=cinder-volume-copy - -# The upper limit of bandwidth of volume copy. 0 => unlimited -# (integer value) -#volume_copy_bps_limit=0 - -# Sets the behavior of the iSCSI target to either perform -# write-back(on) or write-through(off). This parameter is -# valid if iscsi_helper is set to tgtadm or iseradm. (string -# value) -#iscsi_write_cache=on - -# Determines the iSCSI protocol for new iSCSI volumes, created -# with tgtadm or lioadm target helpers. In order to enable -# RDMA, this parameter should be set with the value "iser". -# The supported iSCSI protocol values are "iscsi" and "iser". -# (string value) -#iscsi_protocol=iscsi - -# The path to the client certificate key for verification, if -# the driver supports it. (string value) -#driver_client_cert_key=<None> - -# The path to the client certificate for verification, if the -# driver supports it. (string value) -#driver_client_cert=<None> - -# Tell driver to use SSL for connection to backend storage if -# the driver supports it. (boolean value) -#driver_use_ssl=false - -# Float representation of the over subscription ratio when -# thin provisioning is involved. Default ratio is 20.0, -# meaning provisioned capacity can be 20 times of the total -# physical capacity. If the ratio is 10.5, it means -# provisioned capacity can be 10.5 times of the total physical -# capacity. A ratio of 1.0 means provisioned capacity cannot -# exceed the total physical capacity. A ratio lower than 1.0 -# will be ignored and the default value will be used instead. -# (floating point value) -#max_over_subscription_ratio=20.0 - -# Certain ISCSI targets have predefined target names, SCST -# target driver uses this name. (string value) -#scst_target_iqn_name=<None> - -# SCST target implementation can choose from multiple SCST -# target drivers. (string value) -#scst_target_driver=iscsi - -# Option to enable/disable CHAP authentication for targets. -# (boolean value) -# Deprecated group/name - [DEFAULT]/eqlx_use_chap -#use_chap_auth=false - -# CHAP user name. (string value) -# Deprecated group/name - [DEFAULT]/eqlx_chap_login -#chap_username= - -# Password for specified CHAP account name. (string value) -# Deprecated group/name - [DEFAULT]/eqlx_chap_password -#chap_password= - -# Namespace for driver private data values to be saved in. -# (string value) -#driver_data_namespace=<None> - -# String representation for an equation that will be used to -# filter hosts. Only used when the driver filter is set to be -# used by the Cinder scheduler. (string value) -#filter_function=<None> - -# String representation for an equation that will be used to -# determine the goodness of a host. Only used when using the -# goodness weigher is set to be used by the Cinder scheduler. -# (string value) -#goodness_function=<None> - - -# -# Options defined in cinder.volume.drivers.block_device -# - -# List of all available devices (list value) -#available_devices= - - -# -# Options defined in cinder.volume.drivers.cloudbyte.options -# - -# These values will be used for CloudByte storage's addQos API -# call. (dict value) -#cb_add_qosgroup=latency:15,iops:10,graceallowed:false,iopscontrol:true,memlimit:0,throughput:0,tpcontrol:false,networkspeed:0 - -# Driver will use this API key to authenticate against the -# CloudByte storage's management interface. (string value) -#cb_apikey=None - -# CloudByte storage specific account name. This maps to a -# project name in OpenStack. (string value) -#cb_account_name=None - -# This corresponds to the name of Tenant Storage Machine (TSM) -# in CloudByte storage. A volume will be created in this TSM. -# (string value) -#cb_tsm_name=None - -# A retry value in seconds. Will be used by the driver to -# check if volume creation was successful in CloudByte -# storage. (integer value) -#cb_confirm_volume_create_retry_interval=5 - -# Will confirm a successful volume creation in CloudByte -# storage by making this many number of attempts. (integer -# value) -#cb_confirm_volume_create_retries=3 - -# These values will be used for CloudByte storage's -# createVolume API call. (dict value) -#cb_create_volume=compression:off,deduplication:off,blocklength:512B,sync:always,protocoltype:ISCSI,recordsize:16k - - -# -# Options defined in cinder.volume.drivers.datera -# - -# DEPRECATED: This will be removed in the Liberty release. Use -# san_login and san_password instead. This directly sets the -# Datera API token. (string value) -#datera_api_token=<None> - -# Datera API port. (string value) -#datera_api_port=7717 - -# Datera API version. (string value) -#datera_api_version=1 - -# Number of replicas to create of an inode. (string value) -#datera_num_replicas=3 - - -# -# Options defined in cinder.volume.drivers.dell.dell_storagecenter_common -# - -# Storage Center System Serial Number (integer value) -#dell_sc_ssn=64702 - -# Dell API port (integer value) -#dell_sc_api_port=3033 - -# Name of the server folder to use on the Storage Center -# (string value) -#dell_sc_server_folder=openstack - -# Name of the volume folder to use on the Storage Center -# (string value) -#dell_sc_volume_folder=openstack - - -# -# Options defined in cinder.volume.drivers.emc.emc_vmax_common -# - -# use this file for cinder emc plugin config data (string -# value) -#cinder_emc_config_file=/etc/cinder/cinder_emc_config.xml - - -# -# Options defined in cinder.volume.drivers.emc.emc_vnx_cli -# - -# VNX authentication scope type. (string value) -#storage_vnx_authentication_type=global - -# Directory path that contains the VNX security file. Make -# sure the security file is generated first. (string value) -#storage_vnx_security_file_dir=<None> - -# Naviseccli Path. (string value) -#naviseccli_path= - -# Storage pool name. (string value) -#storage_vnx_pool_name=<None> - -# VNX secondary SP IP Address. (string value) -#san_secondary_ip=<None> - -# Default timeout for CLI operations in minutes. For example, -# LUN migration is a typical long running operation, which -# depends on the LUN size and the load of the array. An upper -# bound in the specific deployment can be set to avoid -# unnecessary long wait. By default, it is 365 days long. -# (integer value) -#default_timeout=525600 - -# Default max number of LUNs in a storage group. By default, -# the value is 255. (integer value) -#max_luns_per_storage_group=255 - -# To destroy storage group when the last LUN is removed from -# it. By default, the value is False. (boolean value) -#destroy_empty_storage_group=false - -# Mapping between hostname and its iSCSI initiator IP -# addresses. (string value) -#iscsi_initiators= - -# Automatically register initiators. By default, the value is -# False. (boolean value) -#initiator_auto_registration=false - -# Automatically deregister initiators after the related -# storage group is destroyed. By default, the value is False. -# (boolean value) -#initiator_auto_deregistration=false - -# Report free_capacity_gb as 0 when the limit to maximum -# number of pool LUNs is reached. By default, the value is -# False. (boolean value) -#check_max_pool_luns_threshold=false - -# Delete a LUN even if it is in Storage Groups. (boolean -# value) -#force_delete_lun_in_storagegroup=false - - -# -# Options defined in cinder.volume.drivers.emc.xtremio -# - -# XMS cluster id in multi-cluster environment (string value) -#xtremio_cluster_name= - - -# -# Options defined in cinder.volume.drivers.eqlx -# - -# Group name to use for creating volumes. Defaults to -# "group-0". (string value) -#eqlx_group_name=group-0 - -# Timeout for the Group Manager cli command execution. Default -# is 30. (integer value) -#eqlx_cli_timeout=30 - -# Maximum retry count for reconnection. Default is 5. (integer -# value) -#eqlx_cli_max_retries=5 - -# Use CHAP authentication for targets. Note that this option -# is deprecated in favour of "use_chap_auth" as specified in -# cinder/volume/driver.py and will be removed in next release. -# (boolean value) -#eqlx_use_chap=false - -# Existing CHAP account name. Note that this option is -# deprecated in favour of "chap_username" as specified in -# cinder/volume/driver.py and will be removed in next release. -# (string value) -#eqlx_chap_login=admin - -# Password for specified CHAP account name. Note that this -# option is deprecated in favour of "chap_password" as -# specified in cinder/volume/driver.py and will be removed in -# the next release (string value) -#eqlx_chap_password=password - -# Pool in which volumes will be created. Defaults to -# "default". (string value) -#eqlx_pool=default - - -# -# Options defined in cinder.volume.drivers.glusterfs -# - -# File with the list of available gluster shares (string -# value) -#glusterfs_shares_config=/etc/cinder/glusterfs_shares - -# Create volumes as sparsed files which take no space.If set -# to False volume is created as regular file.In such case -# volume creation takes a lot of time. (boolean value) -#glusterfs_sparsed_volumes=true - -# Create volumes as QCOW2 files rather than raw files. -# (boolean value) -#glusterfs_qcow2_volumes=false - -# Base dir containing mount points for gluster shares. (string -# value) -#glusterfs_mount_point_base=$state_path/mnt - - -# -# Options defined in cinder.volume.drivers.hds.hds -# - -# The configuration file for the Cinder HDS driver for HUS -# (string value) -#hds_cinder_config_file=/opt/hds/hus/cinder_hus_conf.xml - - -# -# Options defined in cinder.volume.drivers.hds.iscsi -# - -# Configuration file for HDS iSCSI cinder plugin (string -# value) -#hds_hnas_iscsi_config_file=/opt/hds/hnas/cinder_iscsi_conf.xml - - -# -# Options defined in cinder.volume.drivers.hds.nfs -# - -# Configuration file for HDS NFS cinder plugin (string value) -#hds_hnas_nfs_config_file=/opt/hds/hnas/cinder_nfs_conf.xml - - -# -# Options defined in cinder.volume.drivers.hitachi.hbsd_common -# - -# Serial number of storage system (string value) -#hitachi_serial_number=<None> - -# Name of an array unit (string value) -#hitachi_unit_name=<None> - -# Pool ID of storage system (integer value) -#hitachi_pool_id=<None> - -# Thin pool ID of storage system (integer value) -#hitachi_thin_pool_id=<None> - -# Range of logical device of storage system (string value) -#hitachi_ldev_range=<None> - -# Default copy method of storage system (string value) -#hitachi_default_copy_method=FULL - -# Copy speed of storage system (integer value) -#hitachi_copy_speed=3 - -# Interval to check copy (integer value) -#hitachi_copy_check_interval=3 - -# Interval to check copy asynchronously (integer value) -#hitachi_async_copy_check_interval=10 - -# Control port names for HostGroup or iSCSI Target (string -# value) -#hitachi_target_ports=<None> - -# Range of group number (string value) -#hitachi_group_range=<None> - -# Request for creating HostGroup or iSCSI Target (boolean -# value) -#hitachi_group_request=false - - -# -# Options defined in cinder.volume.drivers.hitachi.hbsd_fc -# - -# Request for FC Zone creating HostGroup (boolean value) -#hitachi_zoning_request=false - - -# -# Options defined in cinder.volume.drivers.hitachi.hbsd_horcm -# - -# Instance numbers for HORCM (string value) -#hitachi_horcm_numbers=200,201 - -# Username of storage system for HORCM (string value) -#hitachi_horcm_user=<None> - -# Password of storage system for HORCM (string value) -#hitachi_horcm_password=<None> - -# Add to HORCM configuration (boolean value) -#hitachi_horcm_add_conf=true - - -# -# Options defined in cinder.volume.drivers.hitachi.hbsd_iscsi -# - -# Add CHAP user (boolean value) -#hitachi_add_chap_user=false - -# iSCSI authentication method (string value) -#hitachi_auth_method=<None> - -# iSCSI authentication username (string value) -#hitachi_auth_user=HBSD-CHAP-user - -# iSCSI authentication password (string value) -#hitachi_auth_password=HBSD-CHAP-password - - -# -# Options defined in cinder.volume.drivers.huawei -# - -# The configuration file for the Cinder Huawei driver (string -# value) -#cinder_huawei_conf_file=/etc/cinder/cinder_huawei_conf.xml - - -# -# Options defined in cinder.volume.drivers.ibm.flashsystem -# - -# Connection protocol should be FC. (string value) -#flashsystem_connection_protocol=FC - -# Connect with multipath (FC only). (boolean value) -#flashsystem_multipath_enabled=false - -# Allows vdisk to multi host mapping. (boolean value) -#flashsystem_multihostmap_enabled=true - - -# -# Options defined in cinder.volume.drivers.ibm.gpfs -# - -# Specifies the path of the GPFS directory where Block Storage -# volume and snapshot files are stored. (string value) -#gpfs_mount_point_base=<None> - -# Specifies the path of the Image service repository in GPFS. -# Leave undefined if not storing images in GPFS. (string -# value) -#gpfs_images_dir=<None> - -# Specifies the type of image copy to be used. Set this when -# the Image service repository also uses GPFS so that image -# files can be transferred efficiently from the Image service -# to the Block Storage service. There are two valid values: -# "copy" specifies that a full copy of the image is made; -# "copy_on_write" specifies that copy-on-write optimization -# strategy is used and unmodified blocks of the image file are -# shared efficiently. (string value) -#gpfs_images_share_mode=<None> - -# Specifies an upper limit on the number of indirections -# required to reach a specific block due to snapshots or -# clones. A lengthy chain of copy-on-write snapshots or -# clones can have a negative impact on performance, but -# improves space utilization. 0 indicates unlimited clone -# depth. (integer value) -#gpfs_max_clone_depth=0 - -# Specifies that volumes are created as sparse files which -# initially consume no space. If set to False, the volume is -# created as a fully allocated file, in which case, creation -# may take a significantly longer time. (boolean value) -#gpfs_sparse_volumes=true - -# Specifies the storage pool that volumes are assigned to. By -# default, the system storage pool is used. (string value) -#gpfs_storage_pool=system - - -# -# Options defined in cinder.volume.drivers.ibm.ibmnas -# - -# IBMNAS platform type to be used as backend storage; valid -# values are - v7ku : for using IBM Storwize V7000 Unified, -# sonas : for using IBM Scale Out NAS, gpfs-nas : for using -# NFS based IBM GPFS deployments. (string value) -#ibmnas_platform_type=v7ku - - -# -# Options defined in cinder.volume.drivers.ibm.storwize_svc -# - -# Storage system storage pool for volumes (string value) -#storwize_svc_volpool_name=volpool - -# Storage system space-efficiency parameter for volumes -# (percentage) (integer value) -#storwize_svc_vol_rsize=2 - -# Storage system threshold for volume capacity warnings -# (percentage) (integer value) -#storwize_svc_vol_warning=0 - -# Storage system autoexpand parameter for volumes (True/False) -# (boolean value) -#storwize_svc_vol_autoexpand=true - -# Storage system grain size parameter for volumes -# (32/64/128/256) (integer value) -#storwize_svc_vol_grainsize=256 - -# Storage system compression option for volumes (boolean -# value) -#storwize_svc_vol_compression=false - -# Enable Easy Tier for volumes (boolean value) -#storwize_svc_vol_easytier=true - -# The I/O group in which to allocate volumes (integer value) -#storwize_svc_vol_iogrp=0 - -# Maximum number of seconds to wait for FlashCopy to be -# prepared. Maximum value is 600 seconds (10 minutes) (integer -# value) -#storwize_svc_flashcopy_timeout=120 - -# Connection protocol (iSCSI/FC) (string value) -#storwize_svc_connection_protocol=iSCSI - -# Configure CHAP authentication for iSCSI connections -# (Default: Enabled) (boolean value) -#storwize_svc_iscsi_chap_enabled=true - -# Connect with multipath (FC only; iSCSI multipath is -# controlled by Nova) (boolean value) -#storwize_svc_multipath_enabled=false - -# Allows vdisk to multi host mapping (boolean value) -#storwize_svc_multihostmap_enabled=true - -# Indicate whether svc driver is compatible for NPIV setup. If -# it is compatible, it will allow no wwpns being returned on -# get_conn_fc_wwpns during initialize_connection (boolean -# value) -#storwize_svc_npiv_compatibility_mode=false - -# Allow tenants to specify QOS on create (boolean value) -#storwize_svc_allow_tenant_qos=false - -# If operating in stretched cluster mode, specify the name of -# the pool in which mirrored copies are stored.Example: -# "pool2" (string value) -#storwize_svc_stretched_cluster_partner=<None> - - -# -# Options defined in cinder.volume.drivers.ibm.xiv_ds8k -# - -# Proxy driver that connects to the IBM Storage Array (string -# value) -#xiv_ds8k_proxy=xiv_ds8k_openstack.nova_proxy.XIVDS8KNovaProxy - -# Connection type to the IBM Storage Array (string value) -#xiv_ds8k_connection_type=iscsi - -# CHAP authentication mode, effective only for iscsi -# (disabled|enabled) (string value) -#xiv_chap=disabled - - -# -# Options defined in cinder.volume.drivers.lvm -# - -# Name for the VG that will contain exported volumes (string -# value) -volume_group=cinder-volumes - -# If >0, create LVs with multiple mirrors. Note that this -# requires lvm_mirrors + 2 PVs with available space (integer -# value) -#lvm_mirrors=0 - -# Type of LVM volumes to deploy (string value) -#lvm_type=default - -# LVM conf file to use for the LVM driver in Cinder; this -# setting is ignored if the specified file does not exist (You -# can also specify 'None' to not use a conf file even if one -# exists). (string value) -#lvm_conf_file=/etc/cinder/lvm.conf - - -# -# Options defined in cinder.volume.drivers.netapp.options -# - -# The vFiler unit on which provisioning of block storage -# volumes will be done. This option is only used by the driver -# when connecting to an instance with a storage family of Data -# ONTAP operating in 7-Mode. Only use this option when -# utilizing the MultiStore feature on the NetApp storage -# system. (string value) -#netapp_vfiler=<None> - -# The name of the config.conf stanza for a Data ONTAP (7-mode) -# HA partner. This option is only used by the driver when -# connecting to an instance with a storage family of Data -# ONTAP operating in 7-Mode, and it is required if the storage -# protocol selected is FC. (string value) -#netapp_partner_backend_name=<None> - -# Administrative user account name used to access the storage -# system or proxy server. (string value) -#netapp_login=<None> - -# Password for the administrative user account specified in -# the netapp_login option. (string value) -#netapp_password=<None> - -# This option specifies the virtual storage server (Vserver) -# name on the storage cluster on which provisioning of block -# storage volumes should occur. (string value) -#netapp_vserver=<None> - -# The hostname (or IP address) for the storage system or proxy -# server. (string value) -#netapp_server_hostname=<None> - -# The TCP port to use for communication with the storage -# system or proxy server. If not specified, Data ONTAP drivers -# will use 80 for HTTP and 443 for HTTPS; E-Series will use -# 8080 for HTTP and 8443 for HTTPS. (integer value) -#netapp_server_port=<None> - -# This option is used to specify the path to the E-Series -# proxy application on a proxy server. The value is combined -# with the value of the netapp_transport_type, -# netapp_server_hostname, and netapp_server_port options to -# create the URL used by the driver to connect to the proxy -# application. (string value) -#netapp_webservice_path=/devmgr/v2 - -# This option is only utilized when the storage family is -# configured to eseries. This option is used to restrict -# provisioning to the specified controllers. Specify the value -# of this option to be a comma separated list of controller -# hostnames or IP addresses to be used for provisioning. -# (string value) -#netapp_controller_ips=<None> - -# Password for the NetApp E-Series storage array. (string -# value) -#netapp_sa_password=<None> - -# This option is used to restrict provisioning to the -# specified storage pools. Only dynamic disk pools are -# currently supported. Specify the value of this option to be -# a comma separated list of disk pool names to be used for -# provisioning. (string value) -#netapp_storage_pools=<None> - -# This option is used to define how the controllers in the -# E-Series storage array will work with the particular -# operating system on the hosts that are connected to it. -# (string value) -#netapp_eseries_host_type=linux_dm_mp - -# If the percentage of available space for an NFS share has -# dropped below the value specified by this option, the NFS -# image cache will be cleaned. (integer value) -#thres_avl_size_perc_start=20 - -# When the percentage of available space on an NFS share has -# reached the percentage specified by this option, the driver -# will stop clearing files from the NFS image cache that have -# not been accessed in the last M minutes, where M is the -# value of the expiry_thres_minutes configuration option. -# (integer value) -#thres_avl_size_perc_stop=60 - -# This option specifies the threshold for last access time for -# images in the NFS image cache. When a cache cleaning cycle -# begins, images in the cache that have not been accessed in -# the last M minutes, where M is the value of this parameter, -# will be deleted from the cache to create free space on the -# NFS share. (integer value) -#expiry_thres_minutes=720 - -# This option specifies the path of the NetApp copy offload -# tool binary. Ensure that the binary has execute permissions -# set which allow the effective user of the cinder-volume -# process to execute the file. (string value) -#netapp_copyoffload_tool_path=<None> - -# The quantity to be multiplied by the requested volume size -# to ensure enough space is available on the virtual storage -# server (Vserver) to fulfill the volume creation request. -# (floating point value) -#netapp_size_multiplier=1.2 - -# This option is only utilized when the storage protocol is -# configured to use iSCSI or FC. This option is used to -# restrict provisioning to the specified controller volumes. -# Specify the value of this option to be a comma separated -# list of NetApp controller volume names to be used for -# provisioning. (string value) -#netapp_volume_list=<None> - -# The storage family type used on the storage system; valid -# values are ontap_7mode for using Data ONTAP operating in -# 7-Mode, ontap_cluster for using clustered Data ONTAP, or -# eseries for using E-Series. (string value) -#netapp_storage_family=ontap_cluster - -# The storage protocol to be used on the data path with the -# storage system. (string value) -#netapp_storage_protocol=<None> - -# The transport protocol used when communicating with the -# storage system or proxy server. (string value) -#netapp_transport_type=http - - -# -# Options defined in cinder.volume.drivers.nfs -# - -# File with the list of available nfs shares (string value) -#nfs_shares_config=/etc/cinder/nfs_shares - -# Create volumes as sparsed files which take no space.If set -# to False volume is created as regular file.In such case -# volume creation takes a lot of time. (boolean value) -#nfs_sparsed_volumes=true - -# Percent of ACTUAL usage of the underlying volume before no -# new volumes can be allocated to the volume destination. -# (floating point value) -#nfs_used_ratio=0.95 - -# This will compare the allocated to available space on the -# volume destination. If the ratio exceeds this number, the -# destination will no longer be valid. (floating point value) -#nfs_oversub_ratio=1.0 - -# Base dir containing mount points for nfs shares. (string -# value) -#nfs_mount_point_base=$state_path/mnt - -# Mount options passed to the nfs client. See section of the -# nfs man page for details. (string value) -#nfs_mount_options=<None> - -# The number of attempts to mount nfs shares before raising an -# error. At least one attempt will be made to mount an nfs -# share, regardless of the value specified. (integer value) -#nfs_mount_attempts=3 - - -# -# Options defined in cinder.volume.drivers.nimble -# - -# Nimble Controller pool name (string value) -#nimble_pool_name=default - -# Nimble Subnet Label (string value) -#nimble_subnet_label=* - - -# -# Options defined in cinder.volume.drivers.openvstorage -# - -# Vpool to use for volumes - backend is defined by vpool not -# by us. (string value) -#vpool_name= - - -# -# Options defined in cinder.volume.drivers.prophetstor.options -# - -# DPL pool uuid in which DPL volumes are stored. (string -# value) -#dpl_pool= - -# DPL port number. (integer value) -#dpl_port=8357 - - -# -# Options defined in cinder.volume.drivers.pure -# - -# REST API authorization token. (string value) -#pure_api_token=<None> - - -# -# Options defined in cinder.volume.drivers.quobyte -# - -# URL to the Quobyte volume e.g., quobyte://<DIR host>/<volume -# name> (string value) -#quobyte_volume_url=<None> - -# Path to a Quobyte Client configuration file. (string value) -#quobyte_client_cfg=<None> - -# Create volumes as sparse files which take no space. If set -# to False, volume is created as regular file.In such case -# volume creation takes a lot of time. (boolean value) -#quobyte_sparsed_volumes=true - -# Create volumes as QCOW2 files rather than raw files. -# (boolean value) -#quobyte_qcow2_volumes=true - -# Base dir containing the mount point for the Quobyte volume. -# (string value) -#quobyte_mount_point_base=$state_path/mnt - - -# -# Options defined in cinder.volume.drivers.rbd -# - -# The RADOS pool where rbd volumes are stored (string value) -#rbd_pool=rbd - -# The RADOS client name for accessing rbd volumes - only set -# when using cephx authentication (string value) -#rbd_user=<None> - -# Path to the ceph configuration file (string value) -#rbd_ceph_conf= - -# Flatten volumes created from snapshots to remove dependency -# from volume to snapshot (boolean value) -#rbd_flatten_volume_from_snapshot=false - -# The libvirt uuid of the secret for the rbd_user volumes -# (string value) -#rbd_secret_uuid=<None> - -# Directory where temporary image files are stored when the -# volume driver does not write them directly to the volume. -# Warning: this option is now deprecated, please use -# image_conversion_dir instead. (string value) -#volume_tmp_dir=<None> - -# Maximum number of nested volume clones that are taken before -# a flatten occurs. Set to 0 to disable cloning. (integer -# value) -#rbd_max_clone_depth=5 - -# Volumes will be chunked into objects of this size (in -# megabytes). (integer value) -#rbd_store_chunk_size=4 - -# Timeout value (in seconds) used when connecting to ceph -# cluster. If value < 0, no timeout is set and default -# librados value is used. (integer value) -#rados_connect_timeout=-1 - - -# -# Options defined in cinder.volume.drivers.remotefs -# - -# IP address or Hostname of NAS system. (string value) -#nas_ip= - -# User name to connect to NAS system. (string value) -#nas_login=admin - -# Password to connect to NAS system. (string value) -#nas_password= - -# SSH port to use to connect to NAS system. (integer value) -#nas_ssh_port=22 - -# Filename of private key to use for SSH authentication. -# (string value) -#nas_private_key= - -# Allow network-attached storage systems to operate in a -# secure environment where root level access is not permitted. -# If set to False, access is as the root user and insecure. If -# set to True, access is not as root. If set to auto, a check -# is done to determine if this is a new installation: True is -# used if so, otherwise False. Default is auto. (string value) -#nas_secure_file_operations=auto - -# Set more secure file permissions on network-attached storage -# volume files to restrict broad other/world access. If set to -# False, volumes are created with open permissions. If set to -# True, volumes are created with permissions for the cinder -# user and group (660). If set to auto, a check is done to -# determine if this is a new installation: True is used if so, -# otherwise False. Default is auto. (string value) -#nas_secure_file_permissions=auto - -# Path to the share to use for storing Cinder volumes. For -# example: "/srv/export1" for an NFS server export available -# at 10.0.5.10:/srv/export1 . (string value) -#nas_share_path= - -# Options used to mount the storage backend file system where -# Cinder volumes are stored. (string value) -#nas_mount_options=<None> - - -# -# Options defined in cinder.volume.drivers.san.hp.hp_3par_common -# - -# 3PAR WSAPI Server Url like https://<3par ip>:8080/api/v1 -# (string value) -#hp3par_api_url= - -# 3PAR Super user username (string value) -#hp3par_username= - -# 3PAR Super user password (string value) -#hp3par_password= - -# List of the CPG(s) to use for volume creation (list value) -#hp3par_cpg=OpenStack - -# The CPG to use for Snapshots for volumes. If empty the -# userCPG will be used. (string value) -#hp3par_cpg_snap= - -# The time in hours to retain a snapshot. You can't delete it -# before this expires. (string value) -#hp3par_snapshot_retention= - -# The time in hours when a snapshot expires and is deleted. -# This must be larger than expiration (string value) -#hp3par_snapshot_expiration= - -# Enable HTTP debugging to 3PAR (boolean value) -#hp3par_debug=false - -# List of target iSCSI addresses to use. (list value) -#hp3par_iscsi_ips= - -# Enable CHAP authentication for iSCSI connections. (boolean -# value) -#hp3par_iscsi_chap_enabled=false - - -# -# Options defined in cinder.volume.drivers.san.hp.hp_lefthand_rest_proxy -# - -# HP LeftHand WSAPI Server Url like https://<LeftHand -# ip>:8081/lhos (string value) -#hplefthand_api_url=<None> - -# HP LeftHand Super user username (string value) -#hplefthand_username=<None> - -# HP LeftHand Super user password (string value) -#hplefthand_password=<None> - -# HP LeftHand cluster name (string value) -#hplefthand_clustername=<None> - -# Configure CHAP authentication for iSCSI connections -# (Default: Disabled) (boolean value) -#hplefthand_iscsi_chap_enabled=false - -# Enable HTTP debugging to LeftHand (boolean value) -#hplefthand_debug=false - - -# -# Options defined in cinder.volume.drivers.san.san -# - -# Use thin provisioning for SAN volumes? (boolean value) -#san_thin_provision=true - -# IP address of SAN controller (string value) -#san_ip= - -# Username for SAN controller (string value) -#san_login=admin - -# Password for SAN controller (string value) -#san_password= - -# Filename of private key to use for SSH authentication -# (string value) -#san_private_key= - -# Cluster name to use for creating volumes (string value) -#san_clustername= - -# SSH port to use with SAN (integer value) -#san_ssh_port=22 - -# Execute commands locally instead of over SSH; use if the -# volume service is running on the SAN device (boolean value) -#san_is_local=false - -# SSH connection timeout in seconds (integer value) -#ssh_conn_timeout=30 - -# Minimum ssh connections in the pool (integer value) -#ssh_min_pool_conn=1 - -# Maximum ssh connections in the pool (integer value) -#ssh_max_pool_conn=5 - - -# -# Options defined in cinder.volume.drivers.scality -# - -# Path or URL to Scality SOFS configuration file (string -# value) -#scality_sofs_config=<None> - -# Base dir where Scality SOFS shall be mounted (string value) -#scality_sofs_mount_point=$state_path/scality - -# Path from Scality SOFS root to volume dir (string value) -#scality_sofs_volume_dir=cinder/volumes - - -# -# Options defined in cinder.volume.drivers.smbfs -# - -# File with the list of available smbfs shares. (string value) -#smbfs_shares_config=/etc/cinder/smbfs_shares - -# Default format that will be used when creating volumes if no -# volume format is specified. (string value) -#smbfs_default_volume_format=qcow2 - -# Create volumes as sparsed files which take no space rather -# than regular files when using raw format, in which case -# volume creation takes lot of time. (boolean value) -#smbfs_sparsed_volumes=true - -# Percent of ACTUAL usage of the underlying volume before no -# new volumes can be allocated to the volume destination. -# (floating point value) -#smbfs_used_ratio=0.95 - -# This will compare the allocated to available space on the -# volume destination. If the ratio exceeds this number, the -# destination will no longer be valid. (floating point value) -#smbfs_oversub_ratio=1.0 - -# Base dir containing mount points for smbfs shares. (string -# value) -#smbfs_mount_point_base=$state_path/mnt - -# Mount options passed to the smbfs client. See mount.cifs man -# page for details. (string value) -#smbfs_mount_options=noperm,file_mode=0775,dir_mode=0775 - - -# -# Options defined in cinder.volume.drivers.solidfire -# - -# Set 512 byte emulation on volume creation; (boolean value) -#sf_emulate_512=true - -# Allow tenants to specify QOS on create (boolean value) -#sf_allow_tenant_qos=false - -# Create SolidFire accounts with this prefix. Any string can -# be used here, but the string "hostname" is special and will -# create a prefix using the cinder node hostsname (previous -# default behavior). The default is NO prefix. (string value) -#sf_account_prefix=<None> - -# Account name on the SolidFire Cluster to use as owner of -# template/cache volumes (created if does not exist). (string -# value) -#sf_template_account_name=openstack-vtemplate - -# Create an internal cache of copy of images when a bootable -# volume is created to eliminate fetch from glance and qemu- -# conversion on subsequent calls. (boolean value) -#sf_allow_template_caching=true - -# SolidFire API port. Useful if the device api is behind a -# proxy on a different port. (integer value) -#sf_api_port=443 - - -# -# Options defined in cinder.volume.drivers.srb -# - -# Comma-separated list of REST servers IP to connect to. (eg -# http://IP1/,http://IP2:81/path (string value) -#srb_base_urls=<None> - - -# -# Options defined in cinder.volume.drivers.violin.v6000_common -# - -# IP address or hostname of mg-a (string value) -#gateway_mga=<None> - -# IP address or hostname of mg-b (string value) -#gateway_mgb=<None> - -# Use igroups to manage targets and initiators (boolean value) -#use_igroups=false - -# Global backend request timeout, in seconds (integer value) -#request_timeout=300 - - -# -# Options defined in cinder.volume.drivers.vmware.vmdk -# - -# IP address for connecting to VMware ESX/VC server. (string -# value) -#vmware_host_ip=<None> - -# Username for authenticating with VMware ESX/VC server. -# (string value) -#vmware_host_username=<None> - -# Password for authenticating with VMware ESX/VC server. -# (string value) -#vmware_host_password=<None> - -# Optional VIM service WSDL Location e.g -# http://<server>/vimService.wsdl. Optional over-ride to -# default location for bug work-arounds. (string value) -#vmware_wsdl_location=<None> - -# Number of times VMware ESX/VC server API must be retried -# upon connection related issues. (integer value) -#vmware_api_retry_count=10 - -# The interval (in seconds) for polling remote tasks invoked -# on VMware ESX/VC server. (floating point value) -#vmware_task_poll_interval=0.5 - -# Name for the folder in the VC datacenter that will contain -# cinder volumes. (string value) -#vmware_volume_folder=cinder-volumes - -# Timeout in seconds for VMDK volume transfer between Cinder -# and Glance. (integer value) -#vmware_image_transfer_timeout_secs=7200 - -# Max number of objects to be retrieved per batch. Query -# results will be obtained in batches from the server and not -# in one shot. Server may still limit the count to something -# less than the configured value. (integer value) -#vmware_max_objects_retrieval=100 - -# Optional string specifying the VMware VC server version. The -# driver attempts to retrieve the version from VMware VC -# server. Set this configuration only if you want to override -# the VC server version. (string value) -#vmware_host_version=<None> - -# Directory where virtual disks are stored during volume -# backup and restore. (string value) -#vmware_tmp_dir=/tmp - - -# -# Options defined in cinder.volume.drivers.windows.windows -# - -# Path to store VHD backed volumes (string value) -#windows_iscsi_lun_path=C:\iSCSIVirtualDisks - - -# -# Options defined in cinder.volume.drivers.xio -# - -# Default storage pool for volumes. (integer value) -#ise_storage_pool=1 - -# Raid level for ISE volumes. (integer value) -#ise_raid=1 - -# Number of retries (per port) when establishing connection to -# ISE management port. (integer value) -#ise_connection_retries=5 - -# Interval (secs) between retries. (integer value) -#ise_retry_interval=1 - -# Number on retries to get completion status after issuing a -# command to ISE. (integer value) -#ise_completion_retries=30 - - -# -# Options defined in cinder.volume.drivers.zfssa.zfssanfs -# - -# Data path IP address (string value) -#zfssa_data_ip=<None> - -# HTTPS port number (string value) -#zfssa_https_port=443 - -# Options to be passed while mounting share over nfs (string -# value) -#zfssa_nfs_mount_options= - -# Storage pool name. (string value) -#zfssa_nfs_pool= - -# Project name. (string value) -#zfssa_nfs_project=NFSProject - -# Share name. (string value) -#zfssa_nfs_share=nfs_share - -# Data compression. (string value) -#zfssa_nfs_share_compression=off - -# Synchronous write bias-latency, throughput. (string value) -#zfssa_nfs_share_logbias=latency - -# REST connection timeout. (seconds) (integer value) -#zfssa_rest_timeout=<None> - - -# -# Options defined in cinder.volume.manager -# - -# Driver to use for volume creation (string value) -volume_driver=cinder.volume.drivers.lvm.LVMISCSIDriver - -# Timeout for creating the volume to migrate to when -# performing volume migration (seconds) (integer value) -#migration_create_volume_timeout_secs=300 - -# Offload pending volume delete during volume service startup -# (boolean value) -#volume_service_inithost_offload=false - -# FC Zoning mode configured (string value) -#zoning_mode=none - -# User defined capabilities, a JSON formatted string -# specifying key/value pairs. The key/value pairs can be used -# by the CapabilitiesFilter to select between backends when -# requests specify volume types. For example, specifying a -# service level or the geographical location of a backend, -# then creating a volume type to allow the user to select by -# these different properties. (string value) -#extra_capabilities={} - - -[BRCD_FABRIC_EXAMPLE] - -# -# Options defined in cinder.zonemanager.drivers.brocade.brcd_fabric_opts -# - -# Management IP of fabric (string value) -#fc_fabric_address= - -# Fabric user ID (string value) -#fc_fabric_user= - -# Password for user (string value) -#fc_fabric_password= - -# Connecting port (integer value) -#fc_fabric_port=22 - -# overridden zoning policy (string value) -#zoning_policy=initiator-target - -# overridden zoning activation state (boolean value) -#zone_activate=true - -# overridden zone name prefix (string value) -#zone_name_prefix=<None> - -# Principal switch WWN of the fabric (string value) -#principal_switch_wwn=<None> - - -[CISCO_FABRIC_EXAMPLE] - -# -# Options defined in cinder.zonemanager.drivers.cisco.cisco_fabric_opts -# - -# Management IP of fabric (string value) -#cisco_fc_fabric_address= - -# Fabric user ID (string value) -#cisco_fc_fabric_user= - -# Password for user (string value) -#cisco_fc_fabric_password= - -# Connecting port (integer value) -#cisco_fc_fabric_port=22 - -# overridden zoning policy (string value) -#cisco_zoning_policy=initiator-target - -# overridden zoning activation state (boolean value) -#cisco_zone_activate=true - -# overridden zone name prefix (string value) -#cisco_zone_name_prefix=<None> - -# VSAN of the Fabric (string value) -#cisco_zoning_vsan=<None> - - -[database] - -# -# Options defined in oslo.db.concurrency -# - -# Enable the experimental use of thread pooling for all DB API -# calls (boolean value) -# Deprecated group/name - [DEFAULT]/dbapi_use_tpool -#use_tpool=false - -# The SQLAlchemy connection string to use to connect to the -# database. (string value) -connection=postgresql://{{ CINDER_DB_USER }}:{{ CINDER_DB_PASSWORD }}@{{ CONTROLLER_HOST_ADDRESS }}/cinder - - -[fc-zone-manager] - -# -# Options defined in cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver -# - -# Southbound connector for zoning operation (string value) -#brcd_sb_connector=cinder.zonemanager.drivers.brocade.brcd_fc_zone_client_cli.BrcdFCZoneClientCLI - - -# -# Options defined in cinder.zonemanager.drivers.cisco.cisco_fc_zone_driver -# - -# Southbound connector for zoning operation (string value) -#cisco_sb_connector=cinder.zonemanager.drivers.cisco.cisco_fc_zone_client_cli.CiscoFCZoneClientCLI - - -# -# Options defined in cinder.zonemanager.fc_zone_manager -# - -# FC Zone Driver responsible for zone management (string -# value) -#zone_driver=cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver.BrcdFCZoneDriver - -# Zoning policy configured by user; valid values include -# "initiator-target" or "initiator" (string value) -#zoning_policy=initiator-target - -# Comma separated list of Fibre Channel fabric names. This -# list of names is used to retrieve other SAN credentials for -# connecting to each SAN fabric (string value) -#fc_fabric_names=<None> - -# FC SAN Lookup Service (string value) -#fc_san_lookup_service=cinder.zonemanager.drivers.brocade.brcd_fc_san_lookup_service.BrcdFCSanLookupService - - -[keymgr] - -# -# Options defined in cinder.keymgr -# - -# The full class name of the key manager API class (string -# value) -#api_class=cinder.keymgr.conf_key_mgr.ConfKeyManager - - -# -# Options defined in cinder.keymgr.conf_key_mgr -# - -# Fixed key returned by key manager, specified in hex (string -# value) -#fixed_key=<None> - - -# -# Options defined in cinder.keymgr.key_mgr -# - -# Authentication url for encryption service. (string value) -#encryption_auth_url=http://localhost:5000/v3 - -# Url for encryption service. (string value) -#encryption_api_url=http://localhost:9311/v1 - - -[oslo_concurrency] - -lock_path = /var/lock/cinder - -[keystone_authtoken] - -# -# Options defined in keystonemiddleware.auth_token -# - -# Complete public Identity API endpoint. (string value) -auth_uri=http://{{ CONTROLLER_HOST_ADDRESS }}:5000/v2.0 - -# API version of the admin Identity API endpoint. (string -# value) -#auth_version=<None> - -# Do not handle authorization requests within the middleware, -# but delegate the authorization decision to downstream WSGI -# components. (boolean value) -#delay_auth_decision=false - -# Request timeout value for communicating with Identity API -# server. (integer value) -#http_connect_timeout=<None> - -# How many times are we trying to reconnect when communicating -# with Identity API Server. (integer value) -#http_request_max_retries=3 - -# Env key for the swift cache. (string value) -#cache=<None> - -# Required if identity server requires client certificate -# (string value) -#certfile=<None> - -# Required if identity server requires client certificate -# (string value) -#keyfile=<None> - -# A PEM encoded Certificate Authority to use when verifying -# HTTPs connections. Defaults to system CAs. (string value) -#cafile=<None> - -# Verify HTTPS connections. (boolean value) -#insecure=false - -# Directory used to cache files related to PKI tokens. (string -# value) -#signing_dir=<None> - -# Optionally specify a list of memcached server(s) to use for -# caching. If left undefined, tokens will instead be cached -# in-process. (list value) -# Deprecated group/name - [DEFAULT]/memcache_servers -#memcached_servers=<None> - -# In order to prevent excessive effort spent validating -# tokens, the middleware caches previously-seen tokens for a -# configurable duration (in seconds). Set to -1 to disable -# caching completely. (integer value) -#token_cache_time=300 - -# Determines the frequency at which the list of revoked tokens -# is retrieved from the Identity service (in seconds). A high -# number of revocation events combined with a low cache -# duration may significantly reduce performance. (integer -# value) -#revocation_cache_time=10 - -# (Optional) If defined, indicate whether token data should be -# authenticated or authenticated and encrypted. Acceptable -# values are MAC or ENCRYPT. If MAC, token data is -# authenticated (with HMAC) in the cache. If ENCRYPT, token -# data is encrypted and authenticated in the cache. If the -# value is not one of these options or empty, auth_token will -# raise an exception on initialization. (string value) -#memcache_security_strategy=<None> - -# (Optional, mandatory if memcache_security_strategy is -# defined) This string is used for key derivation. (string -# value) -#memcache_secret_key=<None> - -# (Optional) Number of seconds memcached server is considered -# dead before it is tried again. (integer value) -#memcache_pool_dead_retry=300 - -# (Optional) Maximum total number of open connections to every -# memcached server. (integer value) -#memcache_pool_maxsize=10 - -# (Optional) Socket timeout in seconds for communicating with -# a memcache server. (integer value) -#memcache_pool_socket_timeout=3 - -# (Optional) Number of seconds a connection to memcached is -# held unused in the pool before it is closed. (integer value) -#memcache_pool_unused_timeout=60 - -# (Optional) Number of seconds that an operation will wait to -# get a memcache client connection from the pool. (integer -# value) -#memcache_pool_conn_get_timeout=10 - -# (Optional) Use the advanced (eventlet safe) memcache client -# pool. The advanced pool will only work under python 2.x. -# (boolean value) -#memcache_use_advanced_pool=false - -# (Optional) Indicate whether to set the X-Service-Catalog -# header. If False, middleware will not ask for service -# catalog on token validation and will not set the X-Service- -# Catalog header. (boolean value) -#include_service_catalog=true - -# Used to control the use and type of token binding. Can be -# set to: "disabled" to not check token binding. "permissive" -# (default) to validate binding information if the bind type -# is of a form known to the server and ignore it if not. -# "strict" like "permissive" but if the bind type is unknown -# the token will be rejected. "required" any form of token -# binding is needed to be allowed. Finally the name of a -# binding method that must be present in tokens. (string -# value) -#enforce_token_bind=permissive - -# If true, the revocation list will be checked for cached -# tokens. This requires that PKI tokens are configured on the -# identity server. (boolean value) -#check_revocations_for_cached=false - -# Hash algorithms to use for hashing PKI tokens. This may be a -# single algorithm or multiple. The algorithms are those -# supported by Python standard hashlib.new(). The hashes will -# be tried in the order given, so put the preferred one first -# for performance. The result of the first hash will be stored -# in the cache. This will typically be set to multiple values -# only while migrating from a less secure algorithm to a more -# secure one. Once all the old tokens are expired this option -# should be set to a single value for better performance. -# (list value) -#hash_algorithms=md5 - - -[matchmaker_redis] - -# -# Options defined in oslo.messaging -# - -# Host to locate redis. (string value) -#host=127.0.0.1 - -# Use this port to connect to redis host. (integer value) -#port=6379 - -# Password for Redis server (optional). (string value) -#password=<None> - - -[matchmaker_ring] - -# -# Options defined in oslo.messaging -# - -# Matchmaker ring file (JSON). (string value) -# Deprecated group/name - [DEFAULT]/matchmaker_ringfile -#ringfile=/etc/oslo/matchmaker_ring.json - - -[oslo_messaging_amqp] - -# -# Options defined in oslo.messaging -# - -# address prefix used when sending to a specific server -# (string value) -#server_request_prefix=exclusive - -# address prefix used when broadcasting to all servers (string -# value) -#broadcast_prefix=broadcast - -# address prefix when sending to any server in group (string -# value) -#group_request_prefix=unicast - -# Name for the AMQP container (string value) -#container_name=<None> - -# Timeout for inactive connections (in seconds) (integer -# value) -#idle_timeout=0 - -# Debug: dump AMQP frames to stdout (boolean value) -#trace=false - -# CA certificate PEM file for verifing server certificate -# (string value) -#ssl_ca_file= - -# Identifying certificate PEM file to present to clients -# (string value) -#ssl_cert_file= - -# Private key PEM file used to sign cert_file certificate -# (string value) -#ssl_key_file= - -# Password for decrypting ssl_key_file (if encrypted) (string -# value) -#ssl_key_password=<None> - -# Accept clients using either SSL or plain TCP (boolean value) -#allow_insecure_clients=false - - -[oslo_messaging_qpid] - -# -# Options defined in oslo.messaging -# - -# Use durable queues in AMQP. (boolean value) -# Deprecated group/name - [DEFAULT]/rabbit_durable_queues -#amqp_durable_queues=false - -# Auto-delete queues in AMQP. (boolean value) -#amqp_auto_delete=false - -# Size of RPC connection pool. (integer value) -#rpc_conn_pool_size=30 - -# Qpid broker hostname. (string value) -#qpid_hostname=localhost - -# Qpid broker port. (integer value) -#qpid_port=5672 - -# Qpid HA cluster host:port pairs. (list value) -#qpid_hosts=$qpid_hostname:$qpid_port - -# Username for Qpid connection. (string value) -#qpid_username= - -# Password for Qpid connection. (string value) -#qpid_password= - -# Space separated list of SASL mechanisms to use for auth. -# (string value) -#qpid_sasl_mechanisms= - -# Seconds between connection keepalive heartbeats. (integer -# value) -#qpid_heartbeat=60 - -# Transport to use, either 'tcp' or 'ssl'. (string value) -#qpid_protocol=tcp - -# Whether to disable the Nagle algorithm. (boolean value) -#qpid_tcp_nodelay=true - -# The number of prefetched messages held by receiver. (integer -# value) -#qpid_receiver_capacity=1 - -# The qpid topology version to use. Version 1 is what was -# originally used by impl_qpid. Version 2 includes some -# backwards-incompatible changes that allow broker federation -# to work. Users should update to version 2 when they are -# able to take everything down, as it requires a clean break. -# (integer value) -#qpid_topology_version=1 - - -[oslo_messaging_rabbit] - -# -# Options defined in oslo.messaging -# - -# Use durable queues in AMQP. (boolean value) -# Deprecated group/name - [DEFAULT]/rabbit_durable_queues -#amqp_durable_queues=false - -# Auto-delete queues in AMQP. (boolean value) -#amqp_auto_delete=false - -# Size of RPC connection pool. (integer value) -#rpc_conn_pool_size=30 - -# SSL version to use (valid only if SSL enabled). Valid values -# are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may -# be available on some distributions. (string value) -#kombu_ssl_version= - -# SSL key file (valid only if SSL enabled). (string value) -#kombu_ssl_keyfile= - -# SSL cert file (valid only if SSL enabled). (string value) -#kombu_ssl_certfile= - -# SSL certification authority file (valid only if SSL -# enabled). (string value) -#kombu_ssl_ca_certs= - -# How long to wait before reconnecting in response to an AMQP -# consumer cancel notification. (floating point value) -#kombu_reconnect_delay=1.0 - -# The RabbitMQ broker address where a single node is used. -# (string value) -rabbit_host={{ RABBITMQ_HOST }} - -# The RabbitMQ broker port where a single node is used. -# (integer value) -rabbit_port={{ RABBITMQ_PORT }} - -# RabbitMQ HA cluster host:port pairs. (list value) -rabbit_hosts=$rabbit_host:$rabbit_port - -# Connect over SSL for RabbitMQ. (boolean value) -#rabbit_use_ssl=false - -# The RabbitMQ userid. (string value) -rabbit_userid={{ RABBITMQ_USER }} - -# The RabbitMQ password. (string value) -rabbit_password={{ RABBITMQ_PASSWORD }} - -# The RabbitMQ login method. (string value) -#rabbit_login_method=AMQPLAIN - -# The RabbitMQ virtual host. (string value) -#rabbit_virtual_host=/ - -# How frequently to retry connecting with RabbitMQ. (integer -# value) -#rabbit_retry_interval=1 - -# How long to backoff for between retries when connecting to -# RabbitMQ. (integer value) -#rabbit_retry_backoff=2 - -# Maximum number of RabbitMQ connection retries. Default is 0 -# (infinite retry count). (integer value) -#rabbit_max_retries=0 - -# Use HA queues in RabbitMQ (x-ha-policy: all). If you change -# this option, you must wipe the RabbitMQ database. (boolean -# value) -#rabbit_ha_queues=false - -# Number of seconds after which the Rabbit broker is -# considered down if heartbeat's keep-alive fails (0 disables -# the heartbeat, >0 enables it. Enabling heartbeats requires -# kombu>=3.0.7 and amqp>=1.4.0). EXPERIMENTAL (integer value) -#heartbeat_timeout_threshold=0 - -# How often times during the heartbeat_timeout_threshold we -# check the heartbeat. (integer value) -#heartbeat_rate=2 - -# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake -# (boolean value) -#fake_rabbit=false - - -[profiler] - -# -# Options defined in cinder.service -# - -# If False fully disable profiling feature. (boolean value) -#profiler_enabled=false - -# If False doesn't trace SQL requests. (boolean value) -#trace_sqlalchemy=false - - -[DEFAULT] - - -[keystone_authtoken] - -# -# From keystonemiddleware.auth_token -# - -# Complete public Identity API endpoint. (string value) -#auth_uri = <None> - -# API version of the admin Identity API endpoint. (string value) -#auth_version = <None> - -# Do not handle authorization requests within the middleware, but -# delegate the authorization decision to downstream WSGI components. -# (boolean value) -#delay_auth_decision = false - -# Request timeout value for communicating with Identity API server. -# (integer value) -#http_connect_timeout = <None> - -# How many times are we trying to reconnect when communicating with -# Identity API Server. (integer value) -#http_request_max_retries = 3 - -# Env key for the swift cache. (string value) -#cache = <None> - -# Required if identity server requires client certificate (string -# value) -#certfile = <None> - -# Required if identity server requires client certificate (string -# value) -#keyfile = <None> - -# A PEM encoded Certificate Authority to use when verifying HTTPs -# connections. Defaults to system CAs. (string value) -#cafile = <None> - -# Verify HTTPS connections. (boolean value) -#insecure = false - -# Directory used to cache files related to PKI tokens. (string value) -#signing_dir = <None> - -# Optionally specify a list of memcached server(s) to use for caching. -# If left undefined, tokens will instead be cached in-process. (list -# value) -# Deprecated group/name - [DEFAULT]/memcache_servers -#memcached_servers = <None> - -# In order to prevent excessive effort spent validating tokens, the -# middleware caches previously-seen tokens for a configurable duration -# (in seconds). Set to -1 to disable caching completely. (integer -# value) -#token_cache_time = 300 - -# Determines the frequency at which the list of revoked tokens is -# retrieved from the Identity service (in seconds). A high number of -# revocation events combined with a low cache duration may -# significantly reduce performance. (integer value) -#revocation_cache_time = 10 - -# (Optional) If defined, indicate whether token data should be -# authenticated or authenticated and encrypted. Acceptable values are -# MAC or ENCRYPT. If MAC, token data is authenticated (with HMAC) in -# the cache. If ENCRYPT, token data is encrypted and authenticated in -# the cache. If the value is not one of these options or empty, -# auth_token will raise an exception on initialization. (string value) -#memcache_security_strategy = <None> - -# (Optional, mandatory if memcache_security_strategy is defined) This -# string is used for key derivation. (string value) -#memcache_secret_key = <None> - -# (Optional) Number of seconds memcached server is considered dead -# before it is tried again. (integer value) -#memcache_pool_dead_retry = 300 - -# (Optional) Maximum total number of open connections to every -# memcached server. (integer value) -#memcache_pool_maxsize = 10 - -# (Optional) Socket timeout in seconds for communicating with a -# memcache server. (integer value) -#memcache_pool_socket_timeout = 3 - -# (Optional) Number of seconds a connection to memcached is held -# unused in the pool before it is closed. (integer value) -#memcache_pool_unused_timeout = 60 - -# (Optional) Number of seconds that an operation will wait to get a -# memcache client connection from the pool. (integer value) -#memcache_pool_conn_get_timeout = 10 - -# (Optional) Use the advanced (eventlet safe) memcache client pool. -# The advanced pool will only work under python 2.x. (boolean value) -#memcache_use_advanced_pool = false - -# (Optional) Indicate whether to set the X-Service-Catalog header. If -# False, middleware will not ask for service catalog on token -# validation and will not set the X-Service-Catalog header. (boolean -# value) -#include_service_catalog = true - -# Used to control the use and type of token binding. Can be set to: -# "disabled" to not check token binding. "permissive" (default) to -# validate binding information if the bind type is of a form known to -# the server and ignore it if not. "strict" like "permissive" but if -# the bind type is unknown the token will be rejected. "required" any -# form of token binding is needed to be allowed. Finally the name of a -# binding method that must be present in tokens. (string value) -#enforce_token_bind = permissive - -# If true, the revocation list will be checked for cached tokens. This -# requires that PKI tokens are configured on the identity server. -# (boolean value) -#check_revocations_for_cached = false - -# Hash algorithms to use for hashing PKI tokens. This may be a single -# algorithm or multiple. The algorithms are those supported by Python -# standard hashlib.new(). The hashes will be tried in the order given, -# so put the preferred one first for performance. The result of the -# first hash will be stored in the cache. This will typically be set -# to multiple values only while migrating from a less secure algorithm -# to a more secure one. Once all the old tokens are expired this -# option should be set to a single value for better performance. (list -# value) -#hash_algorithms = md5 - -# Prefix to prepend at the beginning of the path. Deprecated, use -# identity_uri. (string value) -#auth_admin_prefix = - -# Host providing the admin Identity API endpoint. Deprecated, use -# identity_uri. (string value) -#auth_host = 127.0.0.1 - -# Port of the admin Identity API endpoint. Deprecated, use -# identity_uri. (integer value) -#auth_port = 35357 - -# Protocol of the admin Identity API endpoint (http or https). -# Deprecated, use identity_uri. (string value) -#auth_protocol = https - -# Complete admin Identity API endpoint. This should specify the -# unversioned root endpoint e.g. https://localhost:35357/ (string -# value) -identity_uri = http://{{ CONTROLLER_HOST_ADDRESS }}:35357 - -# This option is deprecated and may be removed in a future release. -# Single shared secret with the Keystone configuration used for -# bootstrapping a Keystone installation, or otherwise bypassing the -# normal authentication process. This option should not be used, use -# `admin_user` and `admin_password` instead. (string value) -#admin_token = <None> - -# Service username. (string value) -admin_user = {{ CINDER_SERVICE_USER }} - -# Service user password. (string value) -admin_password = {{ CINDER_SERVICE_PASSWORD }} - -# Service tenant name. (string value) -admin_tenant_name = service |