OpenStack: Install default configuration files

Add the default configuration files for Keystone, Nova,
Neutron, Glance, Cinder, Swift, Ceilometer, Ironic and Tempest.

Also install configuration files which will are not going to be modified
in the following commit, in the post-install-commands for the chunk; as
opposite to having them laying around in the repo and installing them
with the install-files configuration extension.

Note:
  - Some configuration files have been created using commands given in
    their documentations or they .conf.sample files.
  - To generate cinder.conf use the following command on the top of the
    cinder repository:
    ./tools/config/generate_sample.sh -b . -p cinder -o etc/cinder
  - Nova.conf has been taken from:
    http://pkgs.fedoraproject.org/cgit/openstack-nova.git/tree/nova.conf.sample
    commit 69755b4a072edff0957ee256290395600edbab9e
  - tempest.conf has been taken from the tag version '4'.

Signed-off-by: Francisco Redondo Marchena <francisco.marchena@codethink.co.uk>
Signed-off-by: Patrick Darley <patrick.darley@codethink.co.uk>
Signed-off-by: Tiago Gomes <tiago.gomes@codethink.co.uk>

Change-Id: Id26886aaaa9edd8509412615a65e681d5c8117ed

1 files changed, 0 insertions, 190 deletions

diff --git a/install-files/openstack/usr/share/openstack/neutron/plugins/openvswitch/ovs_neutron_plugin.ini b/install-files/openstack/usr/share/openstack/neutron/plugins/openvswitch/ovs_neutron_plugin.ini
deleted file mode 100644
index 9c8e6b58..00000000
--- a/install-files/openstack/usr/share/openstack/neutron/plugins/openvswitch/ovs_neutron_plugin.ini
+++ /dev/null
@@ -1,190 +0,0 @@
-[ovs]
-# (StrOpt) Type of network to allocate for tenant networks. The
-# default value 'local' is useful only for single-box testing and
-# provides no connectivity between hosts. You MUST either change this
-# to 'vlan' and configure network_vlan_ranges below or change this to
-# 'gre' or 'vxlan' and configure tunnel_id_ranges below in order for
-# tenant networks to provide connectivity between hosts. Set to 'none'
-# to disable creation of tenant networks.
-#
-# tenant_network_type = local
-# Example: tenant_network_type = gre
-# Example: tenant_network_type = vxlan
-
-# (ListOpt) Comma-separated list of
-# <physical_network>[:<vlan_min>:<vlan_max>] tuples enumerating ranges
-# of VLAN IDs on named physical networks that are available for
-# allocation. All physical networks listed are available for flat and
-# VLAN provider network creation. Specified ranges of VLAN IDs are
-# available for tenant network allocation if tenant_network_type is
-# 'vlan'. If empty, only gre, vxlan and local networks may be created.
-#
-# network_vlan_ranges =
-# Example: network_vlan_ranges = physnet1:1000:2999
-
-# (BoolOpt) Set to True in the server and the agents to enable support
-# for GRE or VXLAN networks. Requires kernel support for OVS patch ports and
-# GRE or VXLAN tunneling.
-#
-# WARNING: This option will be deprecated in the Icehouse release, at which
-#          point setting tunnel_type below will be required to enable
-#          tunneling.
-#
-# enable_tunneling = False
-
-# (StrOpt) The type of tunnel network, if any, supported by the plugin. If
-# this is set, it will cause tunneling to be enabled. If this is not set and
-# the option enable_tunneling is set, this will default to 'gre'.
-#
-# tunnel_type =
-# Example: tunnel_type = gre
-# Example: tunnel_type = vxlan
-
-# (ListOpt) Comma-separated list of <tun_min>:<tun_max> tuples
-# enumerating ranges of GRE or VXLAN tunnel IDs that are available for
-# tenant network allocation if tenant_network_type is 'gre' or 'vxlan'.
-#
-# tunnel_id_ranges =
-# Example: tunnel_id_ranges = 1:1000
-
-# Do not change this parameter unless you have a good reason to.
-# This is the name of the OVS integration bridge. There is one per hypervisor.
-# The integration bridge acts as a virtual "patch bay". All VM VIFs are
-# attached to this bridge and then "patched" according to their network
-# connectivity.
-#
-# integration_bridge = br-int
-
-# Only used for the agent if tunnel_id_ranges (above) is not empty for
-# the server.  In most cases, the default value should be fine.
-#
-# tunnel_bridge = br-tun
-
-# Peer patch port in integration bridge for tunnel bridge
-# int_peer_patch_port = patch-tun
-
-# Peer patch port in tunnel bridge for integration bridge
-# tun_peer_patch_port = patch-int
-
-# Uncomment this line for the agent if tunnel_id_ranges (above) is not
-# empty for the server. Set local-ip to be the local IP address of
-# this hypervisor.
-#
-# local_ip =
-
-# (ListOpt) Comma-separated list of <physical_network>:<bridge> tuples
-# mapping physical network names to the agent's node-specific OVS
-# bridge names to be used for flat and VLAN networks. The length of
-# bridge names should be no more than 11. Each bridge must
-# exist, and should have a physical network interface configured as a
-# port. All physical networks listed in network_vlan_ranges on the
-# server should have mappings to appropriate bridges on each agent.
-#
-# bridge_mappings =
-# Example: bridge_mappings = physnet1:br-eth1
-
-# (BoolOpt) Use veths instead of patch ports to interconnect the integration
-# bridge to physical networks. Support kernel without ovs patch port support
-# so long as it is set to True.
-# use_veth_interconnection = False
-
-[agent]
-# Agent's polling interval in seconds
-# polling_interval = 2
-
-# Minimize polling by monitoring ovsdb for interface changes
-# minimize_polling = True
-
-# When minimize_polling = True, the number of seconds to wait before
-# respawning the ovsdb monitor after losing communication with it
-# ovsdb_monitor_respawn_interval = 30
-
-# (ListOpt) The types of tenant network tunnels supported by the agent.
-# Setting this will enable tunneling support in the agent. This can be set to
-# either 'gre' or 'vxlan'. If this is unset, it will default to [] and
-# disable tunneling support in the agent. When running the agent with the OVS
-# plugin, this value must be the same as "tunnel_type" in the "[ovs]" section.
-# When running the agent with ML2, you can specify as many values here as
-# your compute hosts supports.
-#
-# tunnel_types =
-# Example: tunnel_types = gre
-# Example: tunnel_types = vxlan
-# Example: tunnel_types = vxlan, gre
-
-# (IntOpt) The port number to utilize if tunnel_types includes 'vxlan'. By
-# default, this will make use of the Open vSwitch default value of '4789' if
-# not specified.
-#
-# vxlan_udp_port =
-# Example: vxlan_udp_port = 8472
-
-# (IntOpt) This is the MTU size of veth interfaces.
-# Do not change unless you have a good reason to.
-# The default MTU size of veth interfaces is 1500.
-# This option has no effect if use_veth_interconnection is False
-# veth_mtu =
-# Example: veth_mtu = 1504
-
-# (BoolOpt) Flag to enable l2-population extension. This option should only be
-# used in conjunction with ml2 plugin and l2population mechanism driver. It'll
-# enable plugin to populate remote ports macs and IPs (using fdb_add/remove
-# RPC calbbacks instead of tunnel_sync/update) on OVS agents in order to
-# optimize tunnel management.
-#
-# l2_population = False
-
-# Enable local ARP responder. Requires OVS 2.1. This is only used by the l2
-# population ML2 MechanismDriver.
-#
-# arp_responder = False
-
-# (BoolOpt) Set or un-set the don't fragment (DF) bit on outgoing IP packet
-# carrying GRE/VXLAN tunnel. The default value is True.
-#
-# dont_fragment = True
-
-# (BoolOpt) Set to True on L2 agents to enable support
-# for distributed virtual routing.
-#
-# enable_distributed_routing = False
-
-[securitygroup]
-# Firewall driver for realizing neutron security group function.
-# firewall_driver = neutron.agent.firewall.NoopFirewallDriver
-# Example: firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
-
-# Controls if neutron security group is enabled or not.
-# It should be false when you use nova security group.
-# enable_security_group = True
-
-#-----------------------------------------------------------------------------
-# Sample Configurations.
-#-----------------------------------------------------------------------------
-#
-# 1. With VLANs on eth1.
-# [ovs]
-# network_vlan_ranges = default:2000:3999
-# tunnel_id_ranges =
-# integration_bridge = br-int
-# bridge_mappings = default:br-eth1
-#
-# 2. With GRE tunneling.
-# [ovs]
-# network_vlan_ranges =
-# tunnel_id_ranges = 1:1000
-# integration_bridge = br-int
-# tunnel_bridge = br-tun
-# local_ip = 10.0.0.3
-#
-# 3. With VXLAN tunneling.
-# [ovs]
-# network_vlan_ranges =
-# tenant_network_type = vxlan
-# tunnel_type = vxlan
-# tunnel_id_ranges = 1:1000
-# integration_bridge = br-int
-# tunnel_bridge = br-tun
-# local_ip = 10.0.0.3
-# [agent]
-# tunnel_types = vxlan