OpenStack: Install default configuration files

Add the default configuration files for Keystone, Nova,
Neutron, Glance, Cinder, Swift, Ceilometer, Ironic and Tempest.

Also install configuration files which will are not going to be modified
in the following commit, in the post-install-commands for the chunk; as
opposite to having them laying around in the repo and installing them
with the install-files configuration extension.

Note:
  - Some configuration files have been created using commands given in
    their documentations or they .conf.sample files.
  - To generate cinder.conf use the following command on the top of the
    cinder repository:
    ./tools/config/generate_sample.sh -b . -p cinder -o etc/cinder
  - Nova.conf has been taken from:
    http://pkgs.fedoraproject.org/cgit/openstack-nova.git/tree/nova.conf.sample
    commit 69755b4a072edff0957ee256290395600edbab9e
  - tempest.conf has been taken from the tag version '4'.

Signed-off-by: Francisco Redondo Marchena <francisco.marchena@codethink.co.uk>
Signed-off-by: Patrick Darley <patrick.darley@codethink.co.uk>
Signed-off-by: Tiago Gomes <tiago.gomes@codethink.co.uk>

Change-Id: Id26886aaaa9edd8509412615a65e681d5c8117ed

1 files changed, 0 insertions, 78 deletions

diff --git a/install-files/openstack/usr/share/openstack/neutron/plugins/linuxbridge/linuxbridge_conf.ini b/install-files/openstack/usr/share/openstack/neutron/plugins/linuxbridge/linuxbridge_conf.ini
deleted file mode 100644
index 94fe9803..00000000
--- a/install-files/openstack/usr/share/openstack/neutron/plugins/linuxbridge/linuxbridge_conf.ini
+++ /dev/null
@@ -1,78 +0,0 @@
-[vlans]
-# (StrOpt) Type of network to allocate for tenant networks. The
-# default value 'local' is useful only for single-box testing and
-# provides no connectivity between hosts. You MUST change this to
-# 'vlan' and configure network_vlan_ranges below in order for tenant
-# networks to provide connectivity between hosts. Set to 'none' to
-# disable creation of tenant networks.
-#
-# tenant_network_type = local
-# Example: tenant_network_type = vlan
-
-# (ListOpt) Comma-separated list of
-# <physical_network>[:<vlan_min>:<vlan_max>] tuples enumerating ranges
-# of VLAN IDs on named physical networks that are available for
-# allocation. All physical networks listed are available for flat and
-# VLAN provider network creation. Specified ranges of VLAN IDs are
-# available for tenant network allocation if tenant_network_type is
-# 'vlan'. If empty, only local networks may be created.
-#
-# network_vlan_ranges =
-# Example: network_vlan_ranges = physnet1:1000:2999
-
-[linux_bridge]
-# (ListOpt) Comma-separated list of
-# <physical_network>:<physical_interface> tuples mapping physical
-# network names to the agent's node-specific physical network
-# interfaces to be used for flat and VLAN networks. All physical
-# networks listed in network_vlan_ranges on the server should have
-# mappings to appropriate interfaces on each agent.
-#
-# physical_interface_mappings =
-# Example: physical_interface_mappings = physnet1:eth1
-
-[vxlan]
-# (BoolOpt) enable VXLAN on the agent
-# VXLAN support can be enabled when agent is managed by ml2 plugin using
-# linuxbridge mechanism driver. Useless if set while using linuxbridge plugin.
-# enable_vxlan = False
-#
-# (IntOpt) use specific TTL for vxlan interface protocol packets
-# ttl =
-#
-# (IntOpt) use specific TOS for vxlan interface protocol packets
-# tos =
-#
-# (StrOpt) multicast group to use for broadcast emulation.
-# This group must be the same on all the agents.
-# vxlan_group = 224.0.0.1
-#
-# (StrOpt) Local IP address to use for VXLAN endpoints (required)
-# local_ip =
-#
-# (BoolOpt) Flag to enable l2population extension. This option should be used
-# in conjunction with ml2 plugin l2population mechanism driver (in that case,
-# both linuxbridge and l2population mechanism drivers should be loaded).
-# It enables plugin to populate VXLAN forwarding table, in order to limit
-# the use of broadcast emulation (multicast will be turned off if kernel and
-# iproute2 supports unicast flooding - requires 3.11 kernel and iproute2 3.10)
-# l2_population = False
-
-[agent]
-# Agent's polling interval in seconds
-# polling_interval = 2
-
-# (BoolOpt) Enable server RPC compatibility with old (pre-havana)
-# agents.
-#
-# rpc_support_old_agents = False
-# Example: rpc_support_old_agents = True
-
-[securitygroup]
-# Firewall driver for realizing neutron security group function
-# firewall_driver = neutron.agent.firewall.NoopFirewallDriver
-# Example: firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
-
-# Controls if neutron security group is enabled or not.
-# It should be false when you use nova security group.
-# enable_security_group = True