OpenStack: Install default configuration files

Add the default configuration files for Keystone, Nova,
Neutron, Glance, Cinder, Swift, Ceilometer, Ironic and Tempest.

Also install configuration files which will are not going to be modified
in the following commit, in the post-install-commands for the chunk; as
opposite to having them laying around in the repo and installing them
with the install-files configuration extension.

Note:
  - Some configuration files have been created using commands given in
    their documentations or they .conf.sample files.
  - To generate cinder.conf use the following command on the top of the
    cinder repository:
    ./tools/config/generate_sample.sh -b . -p cinder -o etc/cinder
  - Nova.conf has been taken from:
    http://pkgs.fedoraproject.org/cgit/openstack-nova.git/tree/nova.conf.sample
    commit 69755b4a072edff0957ee256290395600edbab9e
  - tempest.conf has been taken from the tag version '4'.

Signed-off-by: Francisco Redondo Marchena <francisco.marchena@codethink.co.uk>
Signed-off-by: Patrick Darley <patrick.darley@codethink.co.uk>
Signed-off-by: Tiago Gomes <tiago.gomes@codethink.co.uk>

Change-Id: Id26886aaaa9edd8509412615a65e681d5c8117ed

1 files changed, 0 insertions, 100 deletions

diff --git a/install-files/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_plugins.ini b/install-files/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_plugins.ini
deleted file mode 100644
index 17eae737..00000000
--- a/install-files/openstack/usr/share/openstack/neutron/plugins/cisco/cisco_plugins.ini
+++ /dev/null
@@ -1,100 +0,0 @@
-[cisco]
-
-# (StrOpt) A short prefix to prepend to the VLAN number when creating a
-# VLAN interface. For example, if an interface is being created for
-# VLAN 2001 it will be named 'q-2001' using the default prefix.
-#
-# vlan_name_prefix = q-
-# Example: vlan_name_prefix = vnet-
-
-# (StrOpt) A short prefix to prepend to the VLAN number when creating a
-# provider VLAN interface. For example, if an interface is being created
-# for provider VLAN 3003 it will be named 'p-3003' using the default prefix.
-#
-# provider_vlan_name_prefix = p-
-# Example: provider_vlan_name_prefix = PV-
-
-# (BoolOpt) A flag indicating whether Openstack networking should manage the
-# creation and removal of VLAN interfaces for provider networks on the Nexus
-# switches. If the flag is set to False then Openstack will not create or
-# remove VLAN interfaces for provider networks, and the administrator needs
-# to manage these interfaces manually or by external orchestration.
-#
-# provider_vlan_auto_create = True
-
-# (BoolOpt) A flag indicating whether Openstack networking should manage
-# the adding and removing of provider VLANs from trunk ports on the Nexus
-# switches. If the flag is set to False then Openstack will not add or
-# remove provider VLANs from trunk ports, and the administrator needs to
-# manage these operations manually or by external orchestration.
-#
-# provider_vlan_auto_trunk = True
-
-# (StrOpt) Period-separated module path to the model class to use for
-# the Cisco neutron plugin.
-#
-# model_class = neutron.plugins.cisco.models.virt_phy_sw_v2.VirtualPhysicalSwitchModelV2
-
-# (BoolOpt) A flag to enable Layer 3 support on the Nexus switches.
-# Note: This feature is not supported on all models/versions of Cisco
-# Nexus switches. To use this feature, all of the Nexus switches in the
-# deployment must support it.
-# nexus_l3_enable = False
-
-# (BoolOpt) A flag to enable round robin scheduling of routers for SVI.
-# svi_round_robin = False
-
-# Cisco Nexus Switch configurations.
-# Each switch to be managed by Openstack Neutron must be configured here.
-#
-# N1KV Format.
-# [N1KV:<IP address of VSM>]
-# username=<credential username>
-# password=<credential password>
-#
-# Example:
-# [N1KV:2.2.2.2]
-# username=admin
-# password=mySecretPassword
-
-[cisco_n1k]
-
-# (StrOpt) Specify the name of the integration bridge to which the VIFs are
-# attached.
-# Default value: br-int
-# integration_bridge = br-int
-
-# (StrOpt) Name of the policy profile to be associated with a port when no
-# policy profile is specified during port creates.
-# Default value: service_profile
-# default_policy_profile = service_profile
-
-# (StrOpt) Name of the policy profile to be associated with a port owned by
-# network node (dhcp, router).
-# Default value: dhcp_pp
-# network_node_policy_profile = dhcp_pp
-
-# (StrOpt) Name of the network profile to be associated with a network when no
-# network profile is specified during network creates. Admin should pre-create
-# a network profile with this name.
-# Default value: default_network_profile
-# default_network_profile = network_pool
-
-# (IntOpt) Time in seconds for which the plugin polls the VSM for updates in
-# policy profiles.
-# Default value: 60
-# poll_duration = 60
-
-# (BoolOpt) Specify whether tenants are restricted from accessing all the
-# policy profiles.
-# Default value: False, indicating all tenants can access all policy profiles.
-#
-# restrict_policy_profiles = False
-
-# (IntOpt) Number of threads to use to make HTTP requests to the VSM.
-# Default value: 4
-# http_pool_size = 4
-
-# (IntOpt) Timeout duration in seconds for the http request
-# Default value: 15
-# http_timeout = 15