OpenStack: Install default configuration files

Add the default configuration files for Keystone, Nova,
Neutron, Glance, Cinder, Swift, Ceilometer, Ironic and Tempest.

Also install configuration files which will are not going to be modified
in the following commit, in the post-install-commands for the chunk; as
opposite to having them laying around in the repo and installing them
with the install-files configuration extension.

Note:
  - Some configuration files have been created using commands given in
    their documentations or they .conf.sample files.
  - To generate cinder.conf use the following command on the top of the
    cinder repository:
    ./tools/config/generate_sample.sh -b . -p cinder -o etc/cinder
  - Nova.conf has been taken from:
    http://pkgs.fedoraproject.org/cgit/openstack-nova.git/tree/nova.conf.sample
    commit 69755b4a072edff0957ee256290395600edbab9e
  - tempest.conf has been taken from the tag version '4'.

Signed-off-by: Francisco Redondo Marchena <francisco.marchena@codethink.co.uk>
Signed-off-by: Patrick Darley <patrick.darley@codethink.co.uk>
Signed-off-by: Tiago Gomes <tiago.gomes@codethink.co.uk>

Change-Id: Id26886aaaa9edd8509412615a65e681d5c8117ed

1 files changed, 0 insertions, 200 deletions

diff --git a/install-files/openstack/usr/share/openstack/glance/glance-cache.conf b/install-files/openstack/usr/share/openstack/glance/glance-cache.conf
deleted file mode 100644
index 3f2d4603..00000000
--- a/install-files/openstack/usr/share/openstack/glance/glance-cache.conf
+++ /dev/null
@@ -1,200 +0,0 @@
-[DEFAULT]
-# Show more verbose log output (sets INFO log level output)
-#verbose = False
-
-# Show debugging output in logs (sets DEBUG log level output)
-#debug = False
-
-# Log to this file. Make sure you do not set the same log file for both the API
-# and registry servers!
-#
-# If `log_file` is omitted and `use_syslog` is false, then log messages are
-# sent to stdout as a fallback.
-# log_file = /var/log/glance/image-cache.log
-
-# Send logs to syslog (/dev/log) instead of to file specified by `log_file`
-use_syslog = True
-
-# Directory that the Image Cache writes data to
-image_cache_dir = /var/lib/glance/image-cache/
-
-# Number of seconds after which we should consider an incomplete image to be
-# stalled and eligible for reaping
-image_cache_stall_time = 86400
-
-# Max cache size in bytes
-image_cache_max_size = 10737418240
-
-# Address to find the registry server
-registry_host = {{ MANAGEMENT_INTERFACE_IP_ADDRESS }}
-
-# Port the registry server is listening on
-registry_port = 9191
-
-# Auth settings if using Keystone
-# auth_url = http://127.0.0.1:5000/v2.0/
-# admin_tenant_name = %SERVICE_TENANT_NAME%
-# admin_user = %SERVICE_USER%
-# admin_password = %SERVICE_PASSWORD%
-
-# List of which store classes and store class locations are
-# currently known to glance at startup.
-# known_stores = glance.store.filesystem.Store,
-#                glance.store.http.Store,
-#                glance.store.rbd.Store,
-#                glance.store.s3.Store,
-#                glance.store.swift.Store,
-#                glance.store.sheepdog.Store,
-#                glance.store.cinder.Store,
-#                glance.store.vmware_datastore.Store,
-
-# ============ Filesystem Store Options ========================
-
-# Directory that the Filesystem backend store
-# writes image data to
-filesystem_store_datadir = /var/lib/glance/images/
-
-# ============ Swift Store Options =============================
-
-# Version of the authentication service to use
-# Valid versions are '2' for keystone and '1' for swauth and rackspace
-swift_store_auth_version = 2
-
-# Address where the Swift authentication service lives
-# Valid schemes are 'http://' and 'https://'
-# If no scheme specified,  default to 'https://'
-# For swauth, use something like '127.0.0.1:8080/v1.0/'
-swift_store_auth_address = 127.0.0.1:5000/v2.0/
-
-# User to authenticate against the Swift authentication service
-# If you use Swift authentication service, set it to 'account':'user'
-# where 'account' is a Swift storage account and 'user'
-# is a user in that account
-swift_store_user = jdoe:jdoe
-
-# Auth key for the user authenticating against the
-# Swift authentication service
-swift_store_key = a86850deb2742ec3cb41518e26aa2d89
-
-# Container within the account that the account should use
-# for storing images in Swift
-swift_store_container = glance
-
-# Do we create the container if it does not exist?
-swift_store_create_container_on_put = False
-
-# What size, in MB, should Glance start chunking image files
-# and do a large object manifest in Swift? By default, this is
-# the maximum object size in Swift, which is 5GB
-swift_store_large_object_size = 5120
-
-# When doing a large object manifest, what size, in MB, should
-# Glance write chunks to Swift? This amount of data is written
-# to a temporary disk buffer during the process of chunking
-# the image file, and the default is 200MB
-swift_store_large_object_chunk_size = 200
-
-# Whether to use ServiceNET to communicate with the Swift storage servers.
-# (If you aren't RACKSPACE, leave this False!)
-#
-# To use ServiceNET for authentication, prefix hostname of
-# `swift_store_auth_address` with 'snet-'.
-# Ex. https://example.com/v1.0/ -> https://snet-example.com/v1.0/
-swift_enable_snet = False
-
-# ============ S3 Store Options =============================
-
-# Address where the S3 authentication service lives
-# Valid schemes are 'http://' and 'https://'
-# If no scheme specified,  default to 'http://'
-s3_store_host = 127.0.0.1:8080/v1.0/
-
-# User to authenticate against the S3 authentication service
-s3_store_access_key = <20-char AWS access key>
-
-# Auth key for the user authenticating against the
-# S3 authentication service
-s3_store_secret_key = <40-char AWS secret key>
-
-# Container within the account that the account should use
-# for storing images in S3. Note that S3 has a flat namespace,
-# so you need a unique bucket name for your glance images. An
-# easy way to do this is append your AWS access key to "glance".
-# S3 buckets in AWS *must* be lowercased, so remember to lowercase
-# your AWS access key if you use it in your bucket name below!
-s3_store_bucket = <lowercased 20-char aws access key>glance
-
-# Do we create the bucket if it does not exist?
-s3_store_create_bucket_on_put = False
-
-# When sending images to S3, the data will first be written to a
-# temporary buffer on disk. By default the platform's temporary directory
-# will be used. If required, an alternative directory can be specified here.
-# s3_store_object_buffer_dir = /path/to/dir
-
-# ============ Cinder Store Options ===========================
-
-# Info to match when looking for cinder in the service catalog
-# Format is : separated values of the form:
-# <service_type>:<service_name>:<endpoint_type> (string value)
-#cinder_catalog_info = volume:cinder:publicURL
-
-# Override service catalog lookup with template for cinder endpoint
-# e.g. http://localhost:8776/v1/%(project_id)s (string value)
-#cinder_endpoint_template = <None>
-
-# Region name of this node (string value)
-#os_region_name = <None>
-
-# Location of ca certicates file to use for cinder client requests
-# (string value)
-#cinder_ca_certificates_file = <None>
-
-# Number of cinderclient retries on failed http calls (integer value)
-#cinder_http_retries = 3
-
-# Allow to perform insecure SSL requests to cinder (boolean value)
-#cinder_api_insecure = False
-
-# ============ VMware Datastore Store Options =====================
-
-# ESX/ESXi or vCenter Server target system.
-# The server value can be an IP address or a DNS name
-# e.g. 127.0.0.1, 127.0.0.1:443, www.vmware-infra.com
-#vmware_server_host = <None>
-
-# Server username (string value)
-#vmware_server_username = <None>
-
-# Server password (string value)
-#vmware_server_password = <None>
-
-# Inventory path to a datacenter (string value)
-# Value optional when vmware_server_ip is an ESX/ESXi host: if specified
-# should be `ha-datacenter`.
-#vmware_datacenter_path = <None>
-
-# Datastore associated with the datacenter (string value)
-#vmware_datastore_name = <None>
-
-# The number of times we retry on failures
-# e.g., socket error, etc (integer value)
-#vmware_api_retry_count = 10
-
-# The interval used for polling remote tasks
-# invoked on VMware ESX/VC server in seconds (integer value)
-#vmware_task_poll_interval = 5
-
-# Absolute path of the folder containing the images in the datastore
-# (string value)
-#vmware_store_image_dir = /openstack_glance
-
-# Allow to perform insecure SSL requests to the target system (boolean value)
-#vmware_api_insecure = False
-
-# ================= Security Options ==========================
-
-# AES key for encrypting store 'location' metadata, including
-# -- if used -- Swift or S3 credentials
-# Should be set to a random string of length 16, 24 or 32 bytes
-# metadata_encryption_key = <16, 24 or 32 char registry metadata key>