diff options
Diffstat (limited to 'runtime/doc')
| -rw-r--r-- | runtime/doc/pattern.txt | 4 | ||||
| -rw-r--r-- | runtime/doc/pi_getscript.txt | 19 | ||||
| -rw-r--r-- | runtime/doc/pi_netrw.txt | 494 | ||||
| -rw-r--r-- | runtime/doc/pi_tar.txt | 19 | ||||
| -rw-r--r-- | runtime/doc/pi_zip.txt | 11 | ||||
| -rw-r--r-- | runtime/doc/tags | 8 | ||||
| -rw-r--r-- | runtime/doc/todo.txt | 43 |
7 files changed, 394 insertions, 204 deletions
diff --git a/runtime/doc/pattern.txt b/runtime/doc/pattern.txt index 7565c898e..332dbee6d 100644 --- a/runtime/doc/pattern.txt +++ b/runtime/doc/pattern.txt @@ -1,4 +1,4 @@ -*pattern.txt* For Vim version 7.3. Last change: 2013 Jan 25 +*pattern.txt* For Vim version 7.3. Last change: 2013 Apr 20 VIM REFERENCE MANUAL by Bram Moolenaar @@ -1061,6 +1061,8 @@ x A single character, with no special meaning, matches itself any character that's not in "^]-\bdertnoUux". "[\xyz]" matches '\', 'x', 'y' and 'z'. It's better to use "\\" though, future expansions may use other characters after '\'. + - Omitting the trailing ] is not considered an error. "[]" works like + "[]]", it matches the ']' character. - The following translations are accepted when the 'l' flag is not included in 'cpoptions' {not in Vi}: \e <Esc> diff --git a/runtime/doc/pi_getscript.txt b/runtime/doc/pi_getscript.txt index 5543573eb..fa2523cc7 100644 --- a/runtime/doc/pi_getscript.txt +++ b/runtime/doc/pi_getscript.txt @@ -1,11 +1,11 @@ -*pi_getscript.txt* For Vim version 7.0. Last change: 2011 Jun 23 +*pi_getscript.txt* For Vim version 7.0. Last change: 2012 Apr 07 > - GETSCRIPT REFERENCE MANUAL by Charles E. Campbell, Jr. + GETSCRIPT REFERENCE MANUAL by Charles E. Campbell < -Authors: Charles E. Campbell, Jr. <NdrOchip@ScampbellPfamilyA.Mbiz> +Authors: Charles E. Campbell <NdrOchip@ScampbellPfamilyA.Mbiz> (remove NOSPAM from the email address) *GetLatestVimScripts-copyright* -Copyright: (c) 2004-2012 by Charles E. Campbell, Jr. *glvs-copyright* +Copyright: (c) 2004-2012 by Charles E. Campbell *glvs-copyright* The VIM LICENSE (see |copyright|) applies to the files in this package, including getscriptPlugin.vim, getscript.vim, GetLatestVimScripts.dist, and pi_getscript.txt, except use "getscript" @@ -343,6 +343,11 @@ after/syntax/c.vim contained in it to overwrite a user's c.vim. default= $HOME/vimfiles (windows) Override where :AutoInstall: scripts will be installed. Doesn't override vimball installation. +> + g:GetLatestVimScripts_scriptaddr +< default='http://vim.sourceforge.net/script.php?script_id=' + Override this if your system needs + ... ='http://vim.sourceforge.net/script/script.php?script_id=' ============================================================================== 8. GetLatestVimScripts Algorithm *glvs-algorithm* *glvs-alg* @@ -380,7 +385,11 @@ The AutoInstall process will: ============================================================================== 9. GetLatestVimScripts History *getscript-history* *glvs-hist* {{{1 -v44 Jun 23, 2011 : * handles additional decompression options for tarballs +v35 Apr 07, 2012 : * (MengHuan Yu) pointed out that the script url has + changed (somewhat). However, it doesn't work, and + the original one does (under Linux). I'll make it + yet-another-option. +v34 Jun 23, 2011 : * handles additional decompression options for tarballs (tgz taz tbz txz) v33 May 31, 2011 : * using fnameescape() instead of escape() * *.xz support diff --git a/runtime/doc/pi_netrw.txt b/runtime/doc/pi_netrw.txt index c17ca5f7c..98515647a 100644 --- a/runtime/doc/pi_netrw.txt +++ b/runtime/doc/pi_netrw.txt @@ -1,12 +1,12 @@ -*pi_netrw.txt* For Vim version 7.3. Last change: 2012 Oct 25 +*pi_netrw.txt* For Vim version 7.3. Last change: 2013 Apr 19 - ----------------------------------------------------- - NETRW REFERENCE MANUAL by Charles E. Campbell, Jr. - ----------------------------------------------------- -Author: Charles E. Campbell, Jr. <NdrOchip@ScampbellPfamily.AbizM> + ------------------------------------------------ + NETRW REFERENCE MANUAL by Charles E. Campbell + ------------------------------------------------ +Author: Charles E. Campbell <NdrOchip@ScampbellPfamily.AbizM> (remove NOSPAM from Campbell's email first) -Copyright: Copyright (C) 1999-2012 Charles E Campbell, Jr *netrw-copyright* +Copyright: Copyright (C) 1999-2013 Charles E Campbell *netrw-copyright* The VIM LICENSE applies to the files in this package, including netrw.vim, pi_netrw.txt, netrwFileHandlers.vim, netrwSettings.vim, and syntax/netrw.vim. Like anything else that's free, netrw.vim and its @@ -25,83 +25,87 @@ Copyright: Copyright (C) 1999-2012 Charles E Campbell, Jr *netrw-copyright* ============================================================================== 1. Contents *netrw-contents* {{{1 -1. Contents.............................................|netrw-contents| -2. Starting With Netrw..................................|netrw-start| -3. Netrw Reference......................................|netrw-ref| - EXTERNAL APPLICATIONS AND PROTOCOLS................|netrw-externapp| - READING............................................|netrw-read| - WRITING............................................|netrw-write| - SOURCING...........................................|netrw-source| - DIRECTORY LISTING..................................|netrw-dirlist| - CHANGING THE USERID AND PASSWORD...................|netrw-chgup| - VARIABLES AND SETTINGS.............................|netrw-variables| - PATHS..............................................|netrw-path| -4. Network-Oriented File Transfer.......................|netrw-xfer| - NETRC..............................................|netrw-netrc| - PASSWORD...........................................|netrw-passwd| -5. Activation...........................................|netrw-activate| -6. Transparent Remote File Editing......................|netrw-transparent| -7. Ex Commands..........................................|netrw-ex| -8. Variables and Options................................|netrw-variables| -9. Browsing.............................................|netrw-browse| - Introduction To Browsing...........................|netrw-intro-browse| - Quick Reference: Maps..............................|netrw-browse-maps| - Quick Reference: Commands..........................|netrw-browse-cmds| - Bookmarking A Directory............................|netrw-mb| - Browsing...........................................|netrw-cr| - Browsing With A Horizontally Split Window..........|netrw-o| - Browsing With A New Tab............................|netrw-t| - Browsing With A Vertically Split Window............|netrw-v| - Change Listing Style.(thin wide long tree).........|netrw-i| - Changing To A Bookmarked Directory.................|netrw-gb| - Changing To A Predecessor Directory................|netrw-u| - Changing To A Successor Directory..................|netrw-U| - Customizing Browsing With A User Function..........|netrw-x| - Deleting Bookmarks.................................|netrw-mB| - Deleting Files Or Directories......................|netrw-D| - Directory Exploring Commands.......................|netrw-explore| - Exploring With Stars and Patterns..................|netrw-star| - Displaying Information About File..................|netrw-qf| - Edit File Or Directory Hiding List.................|netrw-ctrl-h| - Editing The Sorting Sequence.......................|netrw-S| - Forcing treatment as a file or directory...........|netrw-gd| |netrw-gf| - Going Up...........................................|netrw--| - Hiding Files Or Directories........................|netrw-a| - Improving Browsing.................................|netrw-ssh-hack| - Listing Bookmarks And History......................|netrw-qb| - Making A New Directory.............................|netrw-d| - Making The Browsing Directory The Current Directory|netrw-c| - Marking Files......................................|netrw-mf| - Marking Files By Regular Expression................|netrw-mr| - Marked Files: Arbitrary Command....................|netrw-mx| - Marked Files: Compression And Decompression........|netrw-mz| - Marked Files: Copying..............................|netrw-mc| - Marked Files: Diff.................................|netrw-md| - Marked Files: Editing..............................|netrw-me| - Marked Files: Grep.................................|netrw-mg| - Marked Files: Hiding and Unhiding by Suffix........|netrw-mh| - Marked Files: Moving...............................|netrw-mm| - Marked Files: Printing.............................|netrw-mp| - Marked Files: Sourcing.............................|netrw-ms| - Marked Files: Tagging..............................|netrw-mT| - Marked Files: Setting the Target Directory.........|netrw-mt| - Marked Files: Unmarking............................|netrw-mu| - Netrw Browser Variables............................|netrw-browser-var| - Netrw Browsing And Option Incompatibilities........|netrw-incompatible| - Netrw Settings Window..............................|netrw-settings-window| - Obtaining A File...................................|netrw-O| - Preview Window.....................................|netrw-p| - Previous Window....................................|netrw-P| - Refreshing The Listing.............................|netrw-ctrl-l| - Renaming Files Or Directories......................|netrw-move| - Reversing Sorting Order............................|netrw-r| - Selecting Sorting Style............................|netrw-s| - Setting Editing Window.............................|netrw-C| -10. Problems and Fixes...................................|netrw-problems| -11. Debugging Netrw Itself...............................|netrw-debug| -12. History..............................................|netrw-history| -13. Todo.................................................|netrw-todo| -14. Credits..............................................|netrw-credits| +1. Contents..............................................|netrw-contents| +2. Starting With Netrw...................................|netrw-start| +3. Netrw Reference.......................................|netrw-ref| + EXTERNAL APPLICATIONS AND PROTOCOLS.................|netrw-externapp| + READING.............................................|netrw-read| + WRITING.............................................|netrw-write| + SOURCING............................................|netrw-source| + DIRECTORY LISTING...................................|netrw-dirlist| + CHANGING THE USERID AND PASSWORD....................|netrw-chgup| + VARIABLES AND SETTINGS..............................|netrw-variables| + PATHS...............................................|netrw-path| +4. Network-Oriented File Transfer........................|netrw-xfer| + NETRC...............................................|netrw-netrc| + PASSWORD............................................|netrw-passwd| +5. Activation............................................|netrw-activate| +6. Transparent Remote File Editing.......................|netrw-transparent| +7. Ex Commands...........................................|netrw-ex| +8. Variables and Options.................................|netrw-variables| +9. Browsing..............................................|netrw-browse| + Introduction To Browsing............................|netrw-intro-browse| + Quick Reference: Maps...............................|netrw-browse-maps| + Quick Reference: Commands...........................|netrw-browse-cmds| + Bookmarking A Directory.............................|netrw-mb| + Browsing............................................|netrw-cr| + Browsing With A Horizontally Split Window...........|netrw-o| + Browsing With A New Tab.............................|netrw-t| + Browsing With A Vertically Split Window.............|netrw-v| + Change Listing Style.(thin wide long tree)..........|netrw-i| + Changing To A Bookmarked Directory..................|netrw-gb| + Changing To A Predecessor Directory.................|netrw-u| + Changing To A Successor Directory...................|netrw-U| + Customizing Browsing With A User Function...........|netrw-x| + Deleting Bookmarks..................................|netrw-mB| + Deleting Files Or Directories.......................|netrw-D| + Directory Exploring Commands........................|netrw-explore| + Exploring With Stars and Patterns...................|netrw-star| + Displaying Information About File...................|netrw-qf| + Edit File Or Directory Hiding List..................|netrw-ctrl-h| + Editing The Sorting Sequence........................|netrw-S| + Forcing treatment as a file or directory............|netrw-gd| |netrw-gf| + Going Up............................................|netrw--| + Hiding Files Or Directories.........................|netrw-a| + Improving Browsing..................................|netrw-ssh-hack| + Listing Bookmarks And History.......................|netrw-qb| + Making A New Directory..............................|netrw-d| + Making The Browsing Directory The Current Directory.|netrw-c| + Marking Files.......................................|netrw-mf| + Unmarking Files.....................................|netrw-mF| + Marking Files By QuickFix List......................|netrw-qF| + Marking Files By Regular Expression.................|netrw-mr| + Marked Files: Arbitrary Command.....................|netrw-mx| + Marked Files: Compression And Decompression.........|netrw-mz| + Marked Files: Copying...............................|netrw-mc| + Marked Files: Diff..................................|netrw-md| + Marked Files: Editing...............................|netrw-me| + Marked Files: Grep..................................|netrw-mg| + Marked Files: Hiding and Unhiding by Suffix.........|netrw-mh| + Marked Files: Moving................................|netrw-mm| + Marked Files: Printing..............................|netrw-mp| + Marked Files: Sourcing..............................|netrw-ms| + Marked Files: Setting the Target Directory..........|netrw-mt| + Marked Files: Tagging...............................|netrw-mT| + Marked Files: Target Directory Using Bookmarks......|netrw-Tb| + Marked Files: Target Directory Using History........|netrw-Th| + Marked Files: Unmarking.............................|netrw-mu| + Netrw Browser Variables.............................|netrw-browser-var| + Netrw Browsing And Option Incompatibilities.........|netrw-incompatible| + Netrw Settings Window...............................|netrw-settings-window| + Obtaining A File....................................|netrw-O| + Preview Window......................................|netrw-p| + Previous Window.....................................|netrw-P| + Refreshing The Listing..............................|netrw-ctrl-l| + Reversing Sorting Order.............................|netrw-r| + Renaming Files Or Directories.......................|netrw-R| + Selecting Sorting Style.............................|netrw-s| + Setting Editing Window..............................|netrw-C| +10. Problems and Fixes....................................|netrw-problems| +11. Debugging Netrw Itself................................|netrw-debug| +12. History...............................................|netrw-history| +13. Todo..................................................|netrw-todo| +14. Credits...............................................|netrw-credits| {Vi does not have any of this} @@ -142,7 +146,7 @@ and has lines resembling > < Windows' ftp doesn't support .netrc; however, one may have in one's .vimrc: > - let g:netrw_ftp_cmd= 'c:\Windows\System32\ftp -s:C:\Users\Myself\MACHINE' + let g:netrw_ftp_cmd= 'c:\Windows\System32\ftp -s:C:\Users\Myself\MACHINE' < Netrw will substitute the host's machine name for MACHINE from the url it is attempting to open, and so one may specify > @@ -282,7 +286,7 @@ SOURCING *netrw-source* {{{2 :Nsource "scp://[user@]machine[[:#]port]/path" uses scp :Nsource "sftp://[user@]machine/path" uses sftp -DIRECTORY LISTING *netrw-trailingslash* *netrw-dirlist* {{{2 +DIRECTORY LISTING *netrw-trailingslash* *netrw-dirlist* {{{2 One may browse a directory to get a listing by simply attempting to edit the directory: > @@ -538,8 +542,8 @@ netrw will substitute the current machine name requested for ftp connections for MACHINE. Hence one can have multiple machine.ftp files containing login and password for ftp. Example: > - let g:netrw_ftp_cmd= 'c:\Windows\System32\ftp -s:C:\Users\Myself\MACHINE' - vim ftp://myhost.somewhere.net/ + let g:netrw_ftp_cmd= 'c:\Windows\System32\ftp -s:C:\Users\Myself\MACHINE' + vim ftp://myhost.somewhere.net/ will use a file > C:\Users\Myself\myhost.ftp < @@ -1086,8 +1090,8 @@ QUICK REFERENCE: MAPS *netrw-browse-maps* {{{2 <2-leftmouse> (gvim only) when: * in a netrw-selected file, AND * |g:netrw_retmap| == 1 AND - * the user doesn't already have a <2-leftmouse> mapping - defined before netrw is autoloaded, + * the user doesn't already have a <2-leftmouse> + mapping defined before netrw is autoloaded, then a double clicked leftmouse button will return to the netrw browser window. See |g:netrw_retmap|. <s-leftmouse> (gvim only) like mf, will mark files @@ -1183,17 +1187,18 @@ cursor at the top. Associated setting variables: |g:netrw_alto| |g:netrw_winsize| -Related Actions |netrw-cr| |netrw-p| |netrw-t| |netrw-T| |netrw-v| +Related Actions |netrw-cr| |netrw-p| |netrw-t| |netrw-v| Associated setting variables: |g:netrw_alto| control above/below splitting |g:netrw_winsize| control initial sizing -BROWSING WITH A NEW TAB *netrw-t* *netrw-T* {{{2 +BROWSING WITH A NEW TAB *netrw-t* Normally one enters a file or directory using the <cr>. The "t" map allows one to open a new window holding the new directory listing or file in -a new tab. The "T" version puts the file or directory into a background tab -(see |gT|) +a new tab. + +If you'd like to have the new listing in a background tab, use |gT|. Related Actions |netrw-cr| |netrw-o| |netrw-p| |netrw-v| Associated setting variables: @@ -1213,7 +1218,7 @@ will split the screen, but the same buffer will be shown twice. Associated setting variable: |g:netrw_altv| |g:netrw_winsize| -Related Actions |netrw-cr| |netrw-o| |netrw-t| |netrw-T| |netrw-v| +Related Actions |netrw-cr| |netrw-o| |netrw-t| |netrw-v| Associated setting variables: |g:netrw_altv| control right/left splitting |g:netrw_winsize| control initial sizing @@ -1276,6 +1281,8 @@ To change directory back to a bookmarked directory, use {cnt}gb Any count may be used to reference any of the bookmarks. +Note that |netrw-qb| shows both bookmarks and history; to go +to a location stored in the history see |netrw-u| and |netrw-U|. Related Topics: |netrw-mB| how to delete bookmarks @@ -1291,6 +1298,13 @@ list (unless |g:netrw_dirhistmax| is zero; by default, it's ten). With the "u" map, one can change to an earlier directory (predecessor). To do the opposite, see |netrw-U|. +The "u" map also accepts counts to go back in the history several slots. +For your convenience, |netrw-qb| lists the history number which can be +re-used in that count. + +See |g:netrw_dirhistmax| for how to control the quantity of history stack +slots. + CHANGING TO A SUCCESSOR DIRECTORY *netrw-U* *netrw-downdir* {{{2 @@ -1298,6 +1312,11 @@ With the "U" map, one can change to a later directory (successor). This map is the opposite of the "u" map. (see |netrw-u|) Use the q map to list both the bookmarks and history. (see |netrw-qb|) +The "U" map also accepts counts to go forward in the history several slots. + +See |g:netrw_dirhistmax| for how to control the quantity of history stack +slots. + NETRW CLEAN *netrw-clean* *:NetrwClean* @@ -1674,7 +1693,7 @@ As a quick shortcut, one may press > to toggle between hiding files which begin with a period (dot) and not hiding them. -Associated setting variable: |g:netrw_list_hide| +Associated setting variable: |g:netrw_list_hide| |g:netrw_hide| Associated topics: |netrw-a| |netrw-ctrl-h| |netrw-mh| IMPROVING BROWSING *netrw-listhack* *netrw-ssh-hack* {{{2 @@ -1785,9 +1804,10 @@ Associated setting variables: |g:netrw_localmkdir| |g:netrw_mkdir_cmd| MAKING THE BROWSING DIRECTORY THE CURRENT DIRECTORY *netrw-c* {{{2 By default, |g:netrw_keepdir| is 1. This setting means that the current -directory will not track the browsing directory. +directory will not track the browsing directory. (done for backwards +compatibility with v6's file explorer). -Setting g:netrw_keepdir to 0 tells netrw to make vim's current directory to +Setting g:netrw_keepdir to 0 tells netrw to make vim's current directory track netrw's browsing directory. However, given the default setting for g:netrw_keepdir of 1 where netrw @@ -1810,6 +1830,7 @@ maps make use of marked files: |netrw-mc| Copy marked files to target |netrw-md| Apply vimdiff to marked files |netrw-me| Edit marked files + |netrw-mF| Unmark marked files |netrw-mg| Apply vimgrep to marked files |netrw-mm| Move marked files |netrw-mp| Print marked files @@ -1817,6 +1838,7 @@ maps make use of marked files: |netrw-mT| Generate tags using marked files |netrw-mx| Apply shell command to marked files |netrw-mz| Compress/Decompress marked files + |netrw-qF| Mark files using quickfix list |netrw-O| Obtain marked files |netrw-R| Rename marked files @@ -1844,6 +1866,22 @@ commands which operate on marked files use one or the other of the marked file lists. +UNMARKING FILES *netrw-mF* {{{2 + (also see |netrw-mf|) + +This command will unmark all files in the current buffer. One may also use +mf (|netrw-mf|) on a specific file to unmark just that file. + + +MARKING FILES BY QUICKFIX LIST *netrw-qF* + (also see |netrw-mf|) + +One may convert the |quickfix-error-lists| into a marked file list using +"qF". You may then proceed with commands such as me (|netrw-me|) to +edit them. Quickfix error lists are generated, for example, by calls +to |:vimgrep|. + + MARKING FILES BY REGULAR EXPRESSION *netrw-mr* {{{2 (also see |netrw-mf|) @@ -1902,17 +1940,27 @@ MARKED FILES: EDITING *netrw-me* {{{2 This command will place the marked files on the |arglist| and commence editing them. One may return the to explorer window with |:Rexplore|. +(use |:n| and |:p| to edit next and previous files in the arglist) MARKED FILES: GREP *netrw-mg* {{{2 (See |netrw-mf| and |netrw-mr| for how to mark files) (uses the global marked file list) -This command will apply |:vimgrep| to the marked files. The command will ask -for the requested pattern; one may enter: > +This command will apply |:vimgrep| to the marked files. +The command will ask for the requested pattern; one may then enter: > + /pattern/[g][j] ! /pattern/[g][j] pattern < +In the cases of "j" option usage as shown above, "mg" will winnow the current +marked file list to just those possessing the specified pattern. +Thus, one may use > + mr ...file-pattern + mg ..contents-pattern +to have a marked file list satisfying the file-pattern but containing the +desried contents-pattern. + MARKED FILES: HIDING AND UNHIDING BY SUFFIX *netrw-mh* {{{2 (See |netrw-mf| and |netrw-mr| for how to mark files) (uses the local marked file list) @@ -1958,6 +2006,36 @@ MARKED FILES: SOURCING *netrw-ms* {{{2 Netrw will source the marked files (using vim's |:source| command) +MARKED FILES: SETTING THE TARGET DIRECTORY *netrw-mt* {{{2 + (See |netrw-mf| and |netrw-mr| for how to mark files) + +Set the marked file copy/move-to target (see |netrw-mc| and |netrw-mm|): + + * If the cursor is atop a file name, then the netrw window's currently + displayed directory is used for the copy/move-to target. + + * Also, if the cursor is in the banner, then the netrw window's currently + displayed directory is used for the copy/move-to target. + Unless the target already is the current directory. In which case, + remove the target. + + * However, if the cursor is atop a directory name, then that directory is + used for the copy/move-to target + +There is only one copy/move-to target per vim session; ie. the target is a +script variable (see |s:var|) and is shared between all netrw windows (in an +instance of vim). + +When using menus and gvim, netrw provides a "Targets" entry which allows one +to pick a target from the list of bookmarks and history. + +Related topics: + Marking Files......................................|netrw-mf| + Marking Files by Regular Expression................|netrw-mr| + Marked Files: Target Directory Using Bookmarks.....|netrw-Tb| + Marked Files: Target Directory Using History.......|netrw-Th| + + MARKED FILES: TAGGING *netrw-mT* {{{2 (See |netrw-mf| and |netrw-mr| for how to mark files) (uses the global marked file list) @@ -1983,24 +2061,37 @@ edit the desired file and go to the tag. Associated setting variables: |g:netrw_ctags| |g:netrw_ssh_cmd| +MARKED FILES: TARGET DIRECTORY USING BOOKMARKS *netrw-Tb* {{{2 -MARKED FILES: SETTING THE TARGET DIRECTORY *netrw-mt* {{{2 - (See |netrw-mf| and |netrw-mr| for how to mark files) +Sets the marked file copy/move-to target (see |netrw-mc| and |netrw-mm|). -Set the marked file copy/move-to target (see |netrw-mc| and |netrw-mm|): +The |netrw-qb| map will give you a list of bookmarks (and history). +One may choose one of the bookmarks to become your marked file +target by using [count]Tb (default count: 1). - * if the cursor is atop a file name, then the netrw window's currently - displayed directory is used for the copy/move-to target. +Related topics: + Listing Bookmarks and History......................|netrw-qb| + Marked Files: Setting The Target Directory.........|netrw-mt| + Marked Files: Target Directory Using History.......|netrw-Th| + Marking Files......................................|netrw-mf| + Marking Files by Regular Expression................|netrw-mr| - * also, if the cursor is in the banner, then the netrw window's currently - displayed directory is used for the copy/move-to target. - * however, if the cursor is atop a directory name, then that directory is - used for the copy/move-to target +MARKED FILES: TARGET DIRECTORY USING HISTORY *netrw-Th* {{{2 + +Sets the marked file copy/move-to target (see |netrw-mc| and |netrw-mm|). + +The |netrw-qb| map will give you a list of history (and bookmarks). +One may choose one of the history entries to become your marked file +target by using [count]Th (default count: 0; ie. the current directory). + +Related topics: + Listing Bookmarks and History......................|netrw-qb| + Marked Files: Setting The Target Directory.........|netrw-mt| + Marked Files: Target Directory Using Bookmarks.....|netrw-Tb| + Marking Files......................................|netrw-mf| + Marking Files by Regular Expression................|netrw-mr| -There is only one copy/move-to target per vim session; ie. the target is a -script variable (see |s:var|) and is shared between all netrw windows (in an -instance of vim). MARKED FILES: UNMARKING *netrw-mu* {{{2 (See |netrw-mf| and |netrw-mr| for how to mark files) @@ -2020,21 +2111,21 @@ your browsing preferences. (see also: |netrw-settings|) --- ----------- Var Explanation --- ----------- -< *g:netrw_alto* change from above splitting to below splitting +< *g:netrw_alto* change from above splitting to below splitting by setting this variable (see |netrw-o|) default: =&sb (see |'sb'|) - *g:netrw_altv* change from left splitting to right splitting + *g:netrw_altv* change from left splitting to right splitting by setting this variable (see |netrw-v|) default: =&spr (see |'spr'|) - *g:netrw_banner* enable/suppress the banner + *g:netrw_banner* enable/suppress the banner =0: suppress the banner =1: banner is enabled (default) NOTE: suppressing the banner is a new feature which may cause problems. - *g:netrw_browse_split* when browsing, <cr> will open the file by: + *g:netrw_browse_split* when browsing, <cr> will open the file by: =0: re-using the same window =1: horizontally splitting the window first =2: vertically splitting the window first @@ -2044,7 +2135,7 @@ your browsing preferences. (see also: |netrw-settings|) to get vertical splitting instead of horizontal splitting. - *g:netrw_browsex_viewer* specify user's preference for a viewer: > + *g:netrw_browsex_viewer* specify user's preference for a viewer: > "kfmclient exec" "gnome-open" < If > @@ -2053,15 +2144,15 @@ your browsing preferences. (see also: |netrw-settings|) a script/function to handle the given extension. (see |netrw_filehandler|). - *g:netrw_chgperm* Unix/Linux: "chmod PERM FILENAME" + *g:netrw_chgperm* Unix/Linux: "chmod PERM FILENAME" Windows: "cacls FILENAME /e /p PERM" Used to change access permission for a file. - *g:netrw_compress* ="gzip" + *g:netrw_compress* ="gzip" Will compress marked files with this command - *g:Netrw_corehandler* Allows one to specify something additional + *g:Netrw_corehandler* Allows one to specify something additional to do when handling <core> files via netrw's browser's "x" command (see |netrw-x|). If present, g:Netrw_corehandler specifies @@ -2070,10 +2161,11 @@ your browsing preferences. (see also: |netrw-settings|) is required its holding a function reference) - *g:netrw_ctags* ="ctags" - The default external program used to create tags + *g:netrw_ctags* ="ctags" + The default external program used to create + tags - *g:netrw_cursor* = 2 (default) + *g:netrw_cursor* = 2 (default) This option controls the use of the |'cursorline'| (cul) and |'cursorcolumn'| (cuc) settings by netrw: @@ -2091,7 +2183,7 @@ your browsing preferences. (see also: |netrw-settings|) cul : |'cursorline'| locally set cuc : |'cursorcolumn'| locally set - *g:netrw_decompress* = { ".gz" : "gunzip" , + *g:netrw_decompress* = { ".gz" : "gunzip" , ".bz2" : "bunzip2" , ".zip" : "unzip" , ".tar" : "tar -xf"} @@ -2112,7 +2204,7 @@ your browsing preferences. (see also: |netrw-settings|) 1: warnings 2: errors - *g:netrw_fastbrowse* =0: slow speed directory browsing; + *g:netrw_fastbrowse* =0: slow speed directory browsing; never re-uses directory listings, always obtains directory listings. =1: medium speed directory browsing; @@ -2136,10 +2228,10 @@ your browsing preferences. (see also: |netrw-settings|) trading off accuracy (ie. up-to-date listing) versus speed. - *g:netrw_fname_escape* =' ?&;%' + *g:netrw_fname_escape* =' ?&;%' Used on filenames before remote reading/writing - *g:netrw_ftp_browse_reject* ftp can produce a number of errors and warnings + *g:netrw_ftp_browse_reject* ftp can produce a number of errors and warnings that can show up as "directories" and "files" in the listing. This pattern is used to remove such embedded messages. By default its @@ -2152,19 +2244,19 @@ your browsing preferences. (see also: |netrw-settings|) : connect to address [0-9a-fA-F:]* : No route to host$' - *g:netrw_ftp_list_cmd* options for passing along to ftp for directory + *g:netrw_ftp_list_cmd* options for passing along to ftp for directory listing. Defaults: unix or g:netrw_cygwin set: : "ls -lF" otherwise "dir" - *g:netrw_ftp_sizelist_cmd* options for passing along to ftp for directory + *g:netrw_ftp_sizelist_cmd* options for passing along to ftp for directory listing, sorted by size of file. Defaults: unix or g:netrw_cygwin set: : "ls -slF" otherwise "dir" - *g:netrw_ftp_timelist_cmd* options for passing along to ftp for directory + *g:netrw_ftp_timelist_cmd* options for passing along to ftp for directory listing, sorted by time of last modification. Defaults: unix or g:netrw_cygwin set: : "ls -tlF" @@ -2175,61 +2267,64 @@ your browsing preferences. (see also: |netrw-settings|) These characters in directory names are escaped before applying glob() - *g:netrw_hide* if true, the hiding list is used + *g:netrw_hide* Controlled by the "a" map (see |netrw-a|) + =0 : show all + =1 : show not-hidden files + =2 : show hidden files only default: =0 - *g:netrw_home* The home directory for where bookmarks and + *g:netrw_home* The home directory for where bookmarks and history are saved (as .netrwbook and .netrwhist). default: the first directory on the |'runtimepath'| - *g:netrw_keepdir* =1 (default) keep current directory immune from + *g:netrw_keepdir* =1 (default) keep current directory immune from the browsing directory. =0 keep the current directory the same as the browsing directory. The current browsing directory is contained in b:netrw_curdir (also see |netrw-c|) - *g:netrw_list_cmd* command for listing remote directories + *g:netrw_list_cmd* command for listing remote directories default: (if ssh is executable) "ssh HOSTNAME ls -FLa" - *g:netrw_liststyle* Set the default listing style: + *g:netrw_liststyle* Set the default listing style: = 0: thin listing (one file per line) = 1: long listing (one file per line with time stamp information and file size) = 2: wide listing (multiple files in columns) = 3: tree style listing - *g:netrw_list_hide* comma separated pattern list for hiding files + *g:netrw_list_hide* comma separated pattern list for hiding files Patterns are regular expressions (see |regexp|) Example: let g:netrw_list_hide= '.*\.swp$' default: "" - *g:netrw_localcopycmd* ="cp" Linux/Unix/MacOS/Cygwin + *g:netrw_localcopycmd* ="cp" Linux/Unix/MacOS/Cygwin ="copy" Windows Copies marked files (|netrw-mf|) to target directory (|netrw-mt|, |netrw-mc|) - *g:netrw_localmovecmd* ="mv" Linux/Unix/MacOS/Cygwin + *g:netrw_localmovecmd* ="mv" Linux/Unix/MacOS/Cygwin ="move" Windows Moves marked files (|netrw-mf|) to target directory (|netrw-mt|, |netrw-mm|) - *g:netrw_localmkdir* command for making a local directory + *g:netrw_localmkdir* command for making a local directory default: "mkdir" - *g:netrw_localrmdir* remove directory command (rmdir) + *g:netrw_localrmdir* remove directory command (rmdir) default: "rmdir" - *g:netrw_maxfilenamelen* =32 by default, selected so as to make long + *g:netrw_maxfilenamelen* =32 by default, selected so as to make long listings fit on 80 column displays. If your screen is wider, and you have file or directory names longer than 32 bytes, you may set this option to keep listings columnar. - *g:netrw_mkdir_cmd* command for making a remote directory + *g:netrw_mkdir_cmd* command for making a remote directory via ssh (also see |g:netrw_remote_mkdir|) default: "ssh USEPORT HOSTNAME mkdir" @@ -2246,11 +2341,11 @@ your browsing preferences. (see also: |netrw-settings|) evaluation will be suppressed (see |'ballooneval'|) - *g:netrw_remote_mkdir* command for making a local directory + *g:netrw_remote_mkdir* command for making a local directory via ftp (also see |g:netrw_mkdir_cmd|) default: "mkdir" - *g:netrw_retmap* if it exists and is set to one, then: + *g:netrw_retmap* if it exists and is set to one, then: * if in a netrw-selected file, AND * no normal-mode <2-leftmouse> mapping exists, then the <2-leftmouse> will be mapped for easy @@ -2269,22 +2364,22 @@ your browsing preferences. (see also: |netrw-settings|) default: =0 - *g:netrw_rm_cmd* command for removing files + *g:netrw_rm_cmd* command for removing files default: "ssh USEPORT HOSTNAME rm" - *g:netrw_rmdir_cmd* command for removing directories + *g:netrw_rmdir_cmd* command for removing directories default: "ssh USEPORT HOSTNAME rmdir" - *g:netrw_rmf_cmd* command for removing softlinks + *g:netrw_rmf_cmd* command for removing softlinks default: "ssh USEPORT HOSTNAME rm -f" - *g:netrw_sort_by* sort by "name", "time", or "size" + *g:netrw_sort_by* sort by "name", "time", or "size" default: "name" - *g:netrw_sort_direction* sorting direction: "normal" or "reverse" + *g:netrw_sort_direction* sorting direction: "normal" or "reverse" default: "normal" - *g:netrw_sort_options* sorting is done using |:sort|; this + *g:netrw_sort_options* sorting is done using |:sort|; this variable's value is appended to the sort command. Thus one may ignore case, for example, with the following in your @@ -2292,14 +2387,14 @@ your browsing preferences. (see also: |netrw-settings|) let g:netrw_sort_options="i" < default: "" - *g:netrw_sort_sequence* when sorting by name, first sort by the + *g:netrw_sort_sequence* when sorting by name, first sort by the comma-separated pattern sequence. Note that the filigree added to indicate filetypes should be accounted for in your pattern. default: '[\/]$,*,\.bak$,\.o$,\.h$, \.info$,\.swp$,\.obj$' - *g:netrw_special_syntax* If true, then certain files will be shown + *g:netrw_special_syntax* If true, then certain files will be shown using special syntax in the browser: netrwBak : *.bak @@ -2321,12 +2416,12 @@ your browsing preferences. (see also: |netrw-settings|) < into one's <.vimrc> to use one's own preferences. - *g:netrw_ssh_cmd* One may specify an executable command + *g:netrw_ssh_cmd* One may specify an executable command to use instead of ssh for remote actions such as listing, file removal, etc. default: ssh - *g:netrw_ssh_browse_reject* ssh can sometimes produce unwanted lines, + *g:netrw_ssh_browse_reject* ssh can sometimes produce unwanted lines, messages, banners, and whatnot that one doesn't want masquerading as "directories" and "files". Use this pattern to remove such embedded @@ -2334,11 +2429,11 @@ your browsing preferences. (see also: |netrw-settings|) '^total\s\+\d\+$' - *g:netrw_tmpfile_escape* =' &;' + *g:netrw_tmpfile_escape* =' &;' escape() is applied to all temporary files to escape these characters. - *g:netrw_timefmt* specify format string to vim's strftime(). + *g:netrw_timefmt* specify format string to vim's strftime(). The default, "%c", is "the preferred date and time representation for the current locale" according to my manpage entry for @@ -2348,7 +2443,7 @@ your browsing preferences. (see also: |netrw-settings|) " %a %Y-%m-%d %I-%M-%S %p" default: "%c" - *g:netrw_use_noswf* netrw normally avoids writing swapfiles + *g:netrw_use_noswf* netrw normally avoids writing swapfiles for browser buffers. However, under some systems this apparently is causing nasty ml_get errors to appear; if you're getting @@ -2356,7 +2451,7 @@ your browsing preferences. (see also: |netrw-settings|) let g:netrw_use_noswf= 0 in your .vimrc. - *g:netrw_winsize* specify initial size of new windows made with + *g:netrw_winsize* specify initial size of new windows made with "o" (see |netrw-o|), "v" (see |netrw-v|), |:Hexplore| or |:Vexplore|. The g:netrw_winsize is an integer describing the percentage of the @@ -2367,7 +2462,7 @@ your browsing preferences. (see also: |netrw-settings|) or columns will be used for the new window. default: 50 (for 50%) - *g:netrw_xstrlen* Controls how netrw computes string lengths, + *g:netrw_xstrlen* Controls how netrw computes string lengths, including multi-byte characters' string length. (thanks to N Weibull, T Mechelynck) =0: uses Vim's built-in strlen() @@ -2383,7 +2478,7 @@ your browsing preferences. (see also: |netrw-settings|) immediately preceded by lam, one otherwise, etc) - *g:NetrwTopLvlMenu* This variable specifies the top level + *g:NetrwTopLvlMenu* This variable specifies the top level menu name; by default, it's "Netrw.". If you wish to change this, do so in your .vimrc. @@ -2483,7 +2578,7 @@ has been modified, and there's only one window with that buffer, then the user will be asked if s/he wishes to save the buffer first (yes, no, or cancel). -Related Actions |netrw-cr| |netrw-o| |netrw-t| |netrw-T| |netrw-v| +Related Actions |netrw-cr| |netrw-o| |netrw-t| |netrw-v| Associated setting variables: |g:netrw_alto| control above/below splitting |g:netrw_altv| control right/left splitting @@ -2498,6 +2593,15 @@ hit the <cr> when atop the ./ directory entry in the listing. One may also refresh a local directory by using ":e .". +REVERSING SORTING ORDER *netrw-r* *netrw-reverse* {{{2 + +One may toggle between normal and reverse sorting order by pressing the +"r" key. + +Related topics: |netrw-s| +Associated setting variable: |g:netrw_sort_direction| + + RENAMING FILES OR DIRECTORIES *netrw-move* *netrw-rename* *netrw-R* {{{2 If there are no marked files: (see |netrw-mf|) @@ -2528,15 +2632,6 @@ One may rename a block of files and directories by selecting them with the V (|linewise-visual|). -REVERSING SORTING ORDER *netrw-r* *netrw-reverse* {{{2 - -One may toggle between normal and reverse sorting order by pressing the -"r" key. - -Related topics: |netrw-s| -Associated setting variable: |g:netrw_sort_direction| - - SELECTING SORTING STYLE *netrw-s* *netrw-sort* {{{2 One may select the sorting style by name, time, or (file) size. The "s" map @@ -2620,9 +2715,9 @@ Associated setting variables: |g:netrw_chgwin| P5. My times come up oddly in local browsing Does your system's strftime() accept the "%c" to yield dates - such as "Sun Apr 27 11:49:23 1997"? If not, do a "man strftime" - and find out what option should be used. Then put it into - your |.vimrc|: > + such as "Sun Apr 27 11:49:23 1997"? If not, do a + "man strftime" and find out what option should be used. Then + put it into your |.vimrc|: > let g:netrw_timefmt= "%X" (where X is the option) < @@ -2895,6 +2990,57 @@ which is loaded automatically at startup (assuming :set nocp). ============================================================================== 12. History *netrw-history* {{{1 + v148: Apr 16, 2013 * changed Netrw's Style menu to allow direct + choice of listing style, hiding style, and + sorting style + v147: Nov 24, 2012 * (James McCoy) Even with g:netrw_dirhistmax + at zero, the .vim/ directory would be + created to support history/bookmarks. I've + gone over netrw to suppress history and + bookmarking when g:netrw_dirhistmax is zero. + For instance, the menus will display + (disabled) when attempts to use + bookmarks/history are made. + Nov 29, 2012 * (Kim Jang-hwan) reported that with + g:Align_xstrlen set to 3 that the cursor was + moved (linewise) after invocation. This + problem also afflicted netrw. + (see |g:netrw_xstrlen|) Fixed. + Jan 21, 2013 * (mattn) provided a patch to insert some + endifs needed with the code implementing + |netrw-O|. + Jan 24, 2013 * (John Szakmeister) found that remote file + editing resulted in filetype options being + overwritten by NetrwOptionRestore(). I + moved filetype detect from NetrwGetFile() + to NetrwOptionRestore. + Feb 17, 2013 * (Yukhiro Nakadaira) provided a patch + correcting some syntax errors. + Feb 28, 2013 * (Ingo Karkat) provided a patch preventing + receipt of an |E95| when revisiting a + file://... style url. + Mar 18, 2013 * (Gary Johnson) pointed out that changing + cedit to <Esc> caused problems with visincr; + the cedit setting is now bypassed in netrw too. + Apr 02, 2013 * (Paul Domaskis) reported an undefined + variable error (s:didstarstar) was + occurring. It is now defined at + initialization. + * included additional sanity checking for the + marked file functions. + * included |netrw-qF| and special "j" option + handling for |netrw-mg| + Apr 12, 2013 * |netrw-u| and |netrw-U| now handle counts + * the former mapping for "T" has been removed; + in its place are new maps, |netrw-Tb| and |netrw-Th|. + * the menu now supports a "Targets" entry for + easier target selection. (see |netrw-mt|) + * (Paul Domaskis) reported some problems with + moving/copying files under Windows' gvim + (ie. not cygwin). Fixed. + * (Paul Mueller) provided a patch to get + start and rundll working via |netrw-gx| + by bypassing the user's |'shellslash'| option. v146: Oct 20, 2012 * (David Kotchan) reported that under Windows, directories named with unusual characters such as "#" or "$" were not being listed @@ -2904,6 +3050,10 @@ which is loaded automatically at startup (assuming :set nocp). Netrw will now |:bwipe| netrw buffers upon editing a file if g:netrw_fastbrowse is zero and its not in tree listing style. + * fixed a bug with s:NetrwInit() that + prevented initialization with |Lists| and + |Dictionaries|. + * |netrw-mu| now unmarks marked-file lists v145: Apr 05, 2012 * moved some command from a g:netrw_local_... format to g:netwr_local... format * included some NOTE level messages about diff --git a/runtime/doc/pi_tar.txt b/runtime/doc/pi_tar.txt index 1ff4d7c4c..ad23413c6 100644 --- a/runtime/doc/pi_tar.txt +++ b/runtime/doc/pi_tar.txt @@ -1,10 +1,10 @@ -*pi_tar.txt* For Vim version 7.3. Last change: 2012 Jan 17 +*pi_tar.txt* For Vim version 7.3. Last change: 2013 Apr 17 +====================+ | Tar File Interface | +====================+ -Author: Charles E. Campbell, Jr. <NdrOchip@ScampbellPfamily.AbizM> +Author: Charles E. Campbell <NdrOchip@ScampbellPfamily.AbizM> (remove NOSPAM from Campbell's email first) Copyright 2005-2012: *tar-copyright* The VIM LICENSE (see |copyright|) applies to the files in this @@ -50,6 +50,21 @@ Copyright 2005-2012: *tar-copyright* *g:tar_extractcmd* , which by default is > "tar -xf" < + *:TarDiff* + DIFFERENCING SUPPORT~ + + :TarDiff [filename] + + This command will attempt to show the differences between the tarball + version of a file and the associated file on the system. In order to + find that file on the system, the script uses the path associated with + the file mentioned in the tarball. If the current directory is not + correct for that path, :TarDiff will fail to find the associated file. + + If the [filename] is given, that that filename (and path) will be used + to specify the associated file. + + PREVENTING LOADING~ If for some reason you do not wish to use vim to examine tar'd files, diff --git a/runtime/doc/pi_zip.txt b/runtime/doc/pi_zip.txt index d976055ea..e72d981ce 100644 --- a/runtime/doc/pi_zip.txt +++ b/runtime/doc/pi_zip.txt @@ -1,12 +1,12 @@ -*pi_zip.txt* For Vim version 7.3. Last change: 2012 Jan 17 +*pi_zip.txt* For Vim version 7.3. Last change: 2013 Apr 17 +====================+ | Zip File Interface | +====================+ -Author: Charles E. Campbell, Jr. <NdrOchip@ScampbellPfamily.AbizM> +Author: Charles E. Campbell <NdrOchip@ScampbellPfamily.AbizM> (remove NOSPAM from Campbell's email first) -Copyright: Copyright (C) 2005-2011 Charles E Campbell, Jr *zip-copyright* +Copyright: Copyright (C) 2005-2012 Charles E Campbell *zip-copyright* The VIM LICENSE (see |copyright|) applies to the files in this package, including zipPlugin.vim, zip.vim, and pi_zip.vim. except use "zip.vim" instead of "VIM". Like anything else that's free, zip.vim @@ -85,8 +85,13 @@ Copyright: Copyright (C) 2005-2011 Charles E Campbell, Jr *zip-copyright* ============================================================================== 4. History *zip-history* {{{1 + v26 Nov 15, 2012 * (Jason Spiro) provided a lot of new extensions that + are synonyms for .zip v25 Jun 27, 2011 * using keepj with unzip -Z (consistent with the -p variant) + * (Ben Staniford) now uses + has("win32unix") && executable("cygpath") + before converting to cygwin-style paths v24 Jun 21, 2010 * (Cédric Bosdonnat) unzip seems to need its filenames fnameescape'd as well as shellquote'd * (Motoya Kurotsu) inserted keepj before 0d to protect diff --git a/runtime/doc/tags b/runtime/doc/tags index 4db1f5ef1..c9b714077 100644 --- a/runtime/doc/tags +++ b/runtime/doc/tags @@ -1834,6 +1834,7 @@ $VIMRUNTIME starting.txt /*$VIMRUNTIME* :RmVimball pi_vimball.txt /*:RmVimball* :Sexplore pi_netrw.txt /*:Sexplore* :TOhtml syntax.txt /*:TOhtml* +:TarDiff pi_tar.txt /*:TarDiff* :Texplore pi_netrw.txt /*:Texplore* :UseVimball pi_vimball.txt /*:UseVimball* :Vexplore pi_netrw.txt /*:Vexplore* @@ -6862,7 +6863,8 @@ netrw-O pi_netrw.txt /*netrw-O* netrw-P pi_netrw.txt /*netrw-P* netrw-R pi_netrw.txt /*netrw-R* netrw-S pi_netrw.txt /*netrw-S* -netrw-T pi_netrw.txt /*netrw-T* +netrw-Tb pi_netrw.txt /*netrw-Tb* +netrw-Th pi_netrw.txt /*netrw-Th* netrw-U pi_netrw.txt /*netrw-U* netrw-X pi_netrw.txt /*netrw-X* netrw-a pi_netrw.txt /*netrw-a* @@ -6931,6 +6933,7 @@ netrw-listbookmark pi_netrw.txt /*netrw-listbookmark* netrw-listhack pi_netrw.txt /*netrw-listhack* netrw-login pi_netrw.txt /*netrw-login* netrw-mB pi_netrw.txt /*netrw-mB* +netrw-mF pi_netrw.txt /*netrw-mF* netrw-mT pi_netrw.txt /*netrw-mT* netrw-mb pi_netrw.txt /*netrw-mb* netrw-mc pi_netrw.txt /*netrw-mc* @@ -6985,6 +6988,7 @@ netrw-prvwin pi_netrw.txt /*netrw-prvwin* netrw-pscp pi_netrw.txt /*netrw-pscp* netrw-psftp pi_netrw.txt /*netrw-psftp* netrw-putty pi_netrw.txt /*netrw-putty* +netrw-qF pi_netrw.txt /*netrw-qF* netrw-qb pi_netrw.txt /*netrw-qb* netrw-qf pi_netrw.txt /*netrw-qf* netrw-quickcom pi_netrw.txt /*netrw-quickcom* @@ -7328,7 +7332,9 @@ python-input if_pyth.txt /*python-input* python-output if_pyth.txt /*python-output* python-pyeval if_pyth.txt /*python-pyeval* python-range if_pyth.txt /*python-range* +python-vars if_pyth.txt /*python-vars* python-vim if_pyth.txt /*python-vim* +python-vvars if_pyth.txt /*python-vvars* python-window if_pyth.txt /*python-window* python-windows if_pyth.txt /*python-windows* python.vim syntax.txt /*python.vim* diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt index 2774864d7..8381e6b5f 100644 --- a/runtime/doc/todo.txt +++ b/runtime/doc/todo.txt @@ -1,4 +1,4 @@ -*todo.txt* For Vim version 7.3. Last change: 2013 Apr 12 +*todo.txt* For Vim version 7.3. Last change: 2013 Apr 24 VIM REFERENCE MANUAL by Bram Moolenaar @@ -39,8 +39,6 @@ highlight group. Add a "\zs" after it? Go through more coverity reports. -Valgrind errors in test 16. - Discussion about canonicalization of Hebrew. (Ron Aaron, 2011 April 10) Checking runtime scripts: Thilo Six, 2012 Jun 6. @@ -59,16 +57,14 @@ That is, calling a dictionary function on an autoloaded dict. Works OK for echo, just not for ":call" and ":call call()". (Ted, 2011 Mar 17) Patch by Christian Brabandt, 2013 Mar 23. - -Patch to make building with Ruby 2.0 on 64 bit system work. (eagletmt (Kohei -Suzuki), 2013 Mar 25) +Not 100% sure this is the right solution. Win32: When a directory name contains an exclamation mark, completion doesn't complete the contents of the directory. No escaping for the "!"? (Jan Stocker, 2012 Jan 5) -Patch to avoid that visul motion breaks repeat with ".". (Sung Pae, 2013 Mar -25) +Patch to load ~/.vim/vimrc when ~/.vimrc isn't found. (Lech Lorens, 2013 Apr +13) Problem caused by patch 7.3.638: window->open does not update window correctly. Issue 91. @@ -87,22 +83,31 @@ Patch to support 'u' in interactive substitute. (Christian Brabandt, 2012 Sep Patch to make fold updates much faster. (Christian Brabandt, 2012 Dec) -Patch to add more testing for Visual operators. (glts, 2013 Mar 28) - Patch for IME handling, adds 'imactivatefunc' and 'imstatusfunc' option. (Yukihiro Nakadaira, 2012 Aug 16) Patch to improve IME handling. (Yasuhiro Matsumoto, 2012 Jul 18) +Undo problem: line not removed as expected when using setline() from Insert +mode. (Israel Chauca, 2010 May 13, more in second msg) +Break undo when CTRL-R = changes the text? Or save more lines? +Patch by Christian Brabandt, 2012 Nov 16. + Issue 54: document behavior of -complete, also expands arg. Matches might be highlighted correctly. Inefficient patch by Christian Brabandt, 2013 Feb 26. -New syntax files for apt. (quidame, 2012 Sep 21) +- Add regex for 'paragraphs' and 'sections': 'parare' and 'sectre'. Combine + the two into a regex for searching. (Ned Konz) +Patch by Christian Brabandt, 2013 Apr 20, unfinished. Patch to use bold/italic fonts when 'guifontewide' is set. (Ken Takata, 2013 Mar 31) +Patch to fix finding toolbar bitmaps. Issue 129. + +Patch to handle Python SystemExit. (Yasuhiro Matsumoto, 2013 Apr 15) + v:register is not directly reset to " after a delete command that specifies a register. It is reset after the next command. (Steve Vermeulen, 2013 Mar 16) @@ -116,15 +121,8 @@ Patch to check if 'foldexpr' sets did_emsg. (Christian Brabandt, 2013 Mar 20) Patch to set antialiasing style on Windows. (Ondrej Balaz, 2013 Mar 14) Needs a different check for CLEARTYPE_QUALITY. -Patch for repeating change that uses ":normal". (glts, 2013 March 23) - Issue 72: 'autochdir' causes problems for :vimgrep. -Undo problem: line not removed as expected when using setline() from Insert -mode. (Israel Chauca, 2010 May 13, more in second msg) -Break undo when CTRL-R = changes the text? Or save more lines? -Patch by Christian Brabandt, 2012 Nov 16. - In the ATTENTION message about an existing swap file, mention the name of the process that is running. It might actually be some other program, e.g. after a reboot. @@ -177,6 +175,9 @@ Patch to improve equivalence classes in regexp patterns. Patch with suggestions for starting.txt. (Tony Mechelynck, 2012 Oct 24) But use Gnome instead of GTK? +Patch to make FocusGained and FocusLost work in modern terminals. (Hayaki +Saito, 2013 Apr 24) + Should be possible to enable/disable matchparen per window or buffer. Add a check for b:no_match_paren in Highlight_matching_Pair() (Marcin Szamotulski, 2012 Nov 8) @@ -246,6 +247,9 @@ Patch for input method status. (Hirohito Higashi, 2012 Apr 18) Patch to print the result of a :python command. (Maxim Philippov <philippovmi@gmail.com>, 2012 Aug 16) Update Aug 17. +Patch to use .png icons for the toolbar on MS-Windows. (Martin Gieseking, 2013 +Apr 18) + Problem with winfixheight and resizing. (Yukihiro Nakadaira, 2011 Sep 17) Patch Sep 18. @@ -934,6 +938,7 @@ ATTENTION message? (Tony Mechelynck, 2008 Dec 1) Also: swap files are in ~/tmp/ One has relative file name ".mozilla/...". Add v:motion_force. (Kana Natsuno, 2008 Dec 6) +Maybe call it v:motiontype. Runtime files for Clojure. (Toralf Wittner, 2008 Jun 25) @@ -5086,8 +5091,6 @@ Various improvements: - Add a variant of CTRL-V that stops interpretation of more than one character. For entering mappings on the command line where a key contains several special characters, e.g. a trailing newline. -- Add regex for 'paragraphs' and 'sections': 'parare' and 'sectre'. Combine - the two into a regex for searching. (Ned Konz) - Make '2' option in 'formatoptions' also work inside comments. - Add 's' flag to 'formatoptions': Do not break when inside a string. (Dodt) - When window size changed (with the mouse) and made too small, set it back |