From fcc7fe425183f9ec95fba33d041eb359d0a3a598 Mon Sep 17 00:00:00 2001
From: Anatolij Gustschin <agust@denx.de>
Date: Fri, 8 Feb 2013 00:03:48 +0000
Subject: mpc512x: add ifm ac14xx board
Add new mpc5121e based ac14xx board and a new pinmux config
function for setting individual pinmux bit groups. This
function is used in ac14xx board code.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
include/configs/ac14xx.h | 591 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 591 insertions(+)
create mode 100644 include/configs/ac14xx.h
(limited to 'include/configs/ac14xx.h')
diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h
new file mode 100644
index 0000000000..ac7e877388
--- /dev/null
+++ b/include/configs/ac14xx.h
@@ -0,0 +1,591 @@
+/*
+ * (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
+ * (C) Copyright 2010 DAVE Srl <www.dave.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * ifm AC14xx (MPC5121e based) board configuration file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_AC14XX 1
+/*
+ * Memory map for the ifm AC14xx board:
+ *
+ * 0x0000_0000-0x0FFF_FFFF DDR RAM (256 MB)
+ * 0x3000_0000-0x3001_FFFF On Chip SRAM (128 KB)
+ * 0x8000_0000-0x803F_FFFF IMMR (4 MB)
+ * 0xE000_0000-0xEFFF_FFFF several LPB attached hardware (CSx)
+ * 0xFC00_0000-0xFFFF_FFFF NOR Boot FLASH (64 MB)
+ */
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1 /* E300 Family */
+#define CONFIG_MPC512X 1 /* MPC512X family */
+
+#define CONFIG_SYS_TEXT_BASE 0xFFF00000
+
+#if defined(CONFIG_VIDEO)
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#endif
+
+#define CONFIG_SYS_MPC512X_CLKIN 25000000 /* in Hz */
+#define SCFR1_IPS_DIV 2
+#define SCFR1_LPC_DIV 2
+#define SCFR1_NFC_DIV 2
+#define SCFR1_DIU_DIV 240
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_SYS_IMMR 0x80000000
+#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR + 0x2100)
+
+/* more aggressive 'mtest' over a wider address range */
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest region */
+#define CONFIG_SYS_MEMTEST_END 0x0FE00000
+
+/*
+ * DDR Setup - manually set all parameters as there's no SPD etc.
+ */
+#define CONFIG_SYS_DDR_SIZE 256 /* MB */
+#define CONFIG_SYS_DDR_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000
+
+/*
+ * DDR Controller Configuration XXX TODO
+ *
+ * SYS_CFG:
+ * [31:31] MDDRC Soft Reset: Diabled
+ * [30:30] DRAM CKE pin: Enabled
+ * [29:29] DRAM CLK: Enabled
+ * [28:28] Command Mode: Enabled (For initialization only)
+ * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10]
+ * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10]
+ * [20:19] Read Test: DON'T USE
+ * [18:18] Self Refresh: Enabled
+ * [17:17] 16bit Mode: Disabled
+ * [16:13] Ready Delay: 2
+ * [12:12] Half DQS Delay: Disabled
+ * [11:11] Quarter DQS Delay: Disabled
+ * [10:08] Write Delay: 2
+ * [07:07] Early ODT: Disabled
+ * [06:06] On DIE Termination: Disabled
+ * [05:05] FIFO Overflow Clear: DON'T USE here
+ * [04:04] FIFO Underflow Clear: DON'T USE here
+ * [03:03] FIFO Overflow Pending: DON'T USE here
+ * [02:02] FIFO Underlfow Pending: DON'T USE here
+ * [01:01] FIFO Overlfow Enabled: Enabled
+ * [00:00] FIFO Underflow Enabled: Enabled
+ * TIME_CFG0
+ * [31:16] DRAM Refresh Time: 0 CSB clocks
+ * [15:8] DRAM Command Time: 0 CSB clocks
+ * [07:00] DRAM Precharge Time: 0 CSB clocks
+ * TIME_CFG1
+ * [31:26] DRAM tRFC:
+ * [25:21] DRAM tWR1:
+ * [20:17] DRAM tWRT1:
+ * [16:11] DRAM tDRR:
+ * [10:05] DRAM tRC:
+ * [04:00] DRAM tRAS:
+ * TIME_CFG2
+ * [31:28] DRAM tRCD:
+ * [27:23] DRAM tFAW:
+ * [22:19] DRAM tRTW1:
+ * [18:15] DRAM tCCD:
+ * [14:10] DRAM tRTP:
+ * [09:05] DRAM tRP:
+ * [04:00] DRAM tRPA
+ */
+
+/*
+ * NOTE: although this board uses DDR1 only, the common source brings defaults
+ * for DDR2 init sequences, that's why we have to keep those here as well
+ */
+
+/* DDR1 -- 32bit, drive strength (pad configuration) 3 for control and data */
+#define CONFIG_SYS_IOCTRL_MUX_DDR ((0 << 6) | (3 << 3) | (3 << 0))
+
+#define CONFIG_SYS_MDDRC_SYS_CFG (/* 0xEAA09100 */ 0 \
+ | (1 << 31) /* RST_B */ \
+ | (1 << 30) /* CKE */ \
+ | (1 << 29) /* CLK_ON */ \
+ | (0 << 28) /* CMD_MODE */ \
+ | (5 << 25) /* DRAM_ROW_SELECT */ \
+ | (5 << 21) /* DRAM_BANK_SELECT */ \
+ | (0 << 18) /* SELF_REF_EN */ \
+ | (0 << 17) /* 16BIT_MODE */ \
+ | (4 << 13) /* RDLY */ \
+ | (1 << 12) /* HALF_DQS_DLY */ \
+ | (0 << 11) /* QUART_DQS_DLY */ \
+ | (1 << 8) /* WDLY */ \
+ | (0 << 7) /* EARLY_ODT */ \
+ | (0 << 6) /* ON_DIE_TERMINATE */ \
+ | (0 << 5) /* FIFO_OV_CLEAR */ \
+ | (0 << 4) /* FIFO_UV_CLEAR */ \
+ | (0 << 1) /* FIFO_OV_EN */ \
+ | (0 << 0) /* FIFO_UV_EN */ \
+ )
+
+#define CONFIG_SYS_MDDRC_TIME_CFG0 0x04E03124
+#define CONFIG_SYS_MDDRC_TIME_CFG1 0x30CA1147
+#define CONFIG_SYS_MDDRC_TIME_CFG2 0x32B10864
+
+/* register address only, i.e. template without values */
+#define CONFIG_SYS_MICRON_BMODE 0x01000000
+#define CONFIG_SYS_MICRON_EMODE 0x01010000
+#define CONFIG_SYS_MICRON_EMODE2 0x01020000
+#define CONFIG_SYS_MICRON_EMODE3 0x01030000
+/*
+ * values for mode registers (without mode register address)
+ */
+/* CAS 2.5 (6), burst seq (0) and length 4 (2) */
+#define CONFIG_SYS_MICRON_BMODE_PARAM 0x00000062
+#define CONFIG_SYS_MICRON_BMODE_RSTDLL 0x00000100
+/* DLL enable, reduced drive strength */
+#define CONFIG_SYS_MICRON_EMODE_PARAM 0x00000002
+
+#define CONFIG_SYS_DDRCMD_NOP 0x01380000
+#define CONFIG_SYS_DDRCMD_PCHG_ALL 0x01100400
+#define CONFIG_SYS_MICRON_EMR ((1 << 24) | /* CMD_REQ */ \
+ (0 << 22) | /* DRAM_CS */ \
+ (0 << 21) | /* DRAM_RAS */ \
+ (0 << 20) | /* DRAM_CAS */ \
+ (0 << 19) | /* DRAM_WEB */ \
+ (1 << 16) | /* DRAM_BS[2:0] */ \
+ (0 << 15) | /* */ \
+ (0 << 12) | /* A12->out */ \
+ (0 << 11) | /* A11->RDQS */ \
+ (0 << 10) | /* A10->DQS# */ \
+ (0 << 7) | /* OCD program */ \
+ (0 << 6) | /* Rtt1 */ \
+ (0 << 3) | /* posted CAS# */ \
+ (0 << 2) | /* Rtt0 */ \
+ (1 << 1) | /* ODS */ \
+ (0 << 0) /* DLL */ \
+ )
+#define CONFIG_SYS_MICRON_EMR2 0x01020000
+#define CONFIG_SYS_MICRON_EMR3 0x01030000
+#define CONFIG_SYS_DDRCMD_RFSH 0x01080000
+#define CONFIG_SYS_MICRON_INIT_DEV_OP 0x01000432
+#define CONFIG_SYS_MICRON_EMR_OCD ((1 << 24) | /* CMD_REQ */ \
+ (0 << 22) | /* DRAM_CS */ \
+ (0 << 21) | /* DRAM_RAS */ \
+ (0 << 20) | /* DRAM_CAS */ \
+ (0 << 19) | /* DRAM_WEB */ \
+ (1 << 16) | /* DRAM_BS[2:0] */ \
+ (0 << 15) | /* */ \
+ (0 << 12) | /* A12->out */ \
+ (0 << 11) | /* A11->RDQS */ \
+ (1 << 10) | /* A10->DQS# */ \
+ (7 << 7) | /* OCD program */ \
+ (0 << 6) | /* Rtt1 */ \
+ (0 << 3) | /* posted CAS# */ \
+ (1 << 2) | /* Rtt0 */ \
+ (0 << 1) | /* ODS */ \
+ (0 << 0) /* DLL */ \
+ )
+
+/*
+ * Backward compatible definitions,
+ * so we do not have to change arch/powerpc/cpu/mpc512x/fixed_sdram.c
+ */
+#define CONFIG_SYS_DDRCMD_EM2 (CONFIG_SYS_MICRON_EMR2)
+#define CONFIG_SYS_DDRCMD_EM3 (CONFIG_SYS_MICRON_EMR3)
+#define CONFIG_SYS_DDRCMD_EN_DLL (CONFIG_SYS_MICRON_EMR)
+#define CONFIG_SYS_DDRCMD_OCD_DEFAULT (CONFIG_SYS_MICRON_EMR_OCD)
+
+/* DDR Priority Manager Configuration */
+#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777
+#define CONFIG_SYS_MDDRCGRP_PM_CFG2 0x00000000
+#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001
+#define CONFIG_SYS_MDDRCGRP_LUT0_MU 0xFFEEDDCC
+#define CONFIG_SYS_MDDRCGRP_LUT0_ML 0xBBAAAAAA
+#define CONFIG_SYS_MDDRCGRP_LUT1_MU 0x66666666
+#define CONFIG_SYS_MDDRCGRP_LUT1_ML 0x55555555
+#define CONFIG_SYS_MDDRCGRP_LUT2_MU 0x44444444
+#define CONFIG_SYS_MDDRCGRP_LUT2_ML 0x44444444
+#define CONFIG_SYS_MDDRCGRP_LUT3_MU 0x55555555
+#define CONFIG_SYS_MDDRCGRP_LUT3_ML 0x55555558
+#define CONFIG_SYS_MDDRCGRP_LUT4_MU 0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT4_ML 0x11111122
+#define CONFIG_SYS_MDDRCGRP_LUT0_AU 0xaaaaaaaa
+#define CONFIG_SYS_MDDRCGRP_LUT0_AL 0xaaaaaaaa
+#define CONFIG_SYS_MDDRCGRP_LUT1_AU 0x66666666
+#define CONFIG_SYS_MDDRCGRP_LUT1_AL 0x66666666
+#define CONFIG_SYS_MDDRCGRP_LUT2_AU 0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT2_AL 0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT3_AU 0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT3_AL 0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT4_AU 0x11111111
+#define CONFIG_SYS_MDDRCGRP_LUT4_AL 0x11111111
+
+/*
+ * NOR FLASH on the Local Bus
+ */
+#define CONFIG_SYS_FLASH_CFI /* use the CFI code */
+#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CONFIG_SYS_FLASH_BASE 0xFC000000 /* start of FLASH */
+#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* max flash size */
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
+#define CONFIG_SYS_FLASH_BANKS_LIST { \
+ CONFIG_SYS_FLASH_BASE + 0 * CONFIG_SYS_FLASH_SIZE, \
+ }
+#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors per device */
+
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_PROTECTION
+
+/*
+ * SRAM support
+ */
+#define CONFIG_SYS_SRAM_BASE 0x30000000
+#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */
+
+/*
+ * CS related parameters
+ * TODO document these
+ */
+/* CS0 Flash */
+#define CONFIG_SYS_CS0_CFG 0x00031110
+#define CONFIG_SYS_CS0_START 0xFC000000
+#define CONFIG_SYS_CS0_SIZE 0x04000000
+/* CS1 FRAM */
+#define CONFIG_SYS_CS1_CFG 0x00011000
+#define CONFIG_SYS_CS1_START 0xE0000000
+#define CONFIG_SYS_CS1_SIZE 0x00010000
+/* CS2 AS-i 1 */
+#define CONFIG_SYS_CS2_CFG 0x00009100
+#define CONFIG_SYS_CS2_START 0xE0100000
+#define CONFIG_SYS_CS2_SIZE 0x00080000
+/* CS3 netX */
+#define CONFIG_SYS_CS3_CFG 0x000A1140
+#define CONFIG_SYS_CS3_START 0xE0300000
+#define CONFIG_SYS_CS3_SIZE 0x00020000
+/* CS5 safety */
+#define CONFIG_SYS_CS5_CFG 0x0011F000
+#define CONFIG_SYS_CS5_START 0xE0400000
+#define CONFIG_SYS_CS5_SIZE 0x00010000
+/* CS6 AS-i 2 */
+#define CONFIG_SYS_CS6_CFG 0x00009100
+#define CONFIG_SYS_CS6_START 0xE0200000
+#define CONFIG_SYS_CS6_SIZE 0x00080000
+
+/* Don't use alternative CS timing for any CS */
+#define CONFIG_SYS_CS_ALETIMING 0x00000000
+#define CONFIG_SYS_CS_BURST 0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE 0x00000020
+#define CONFIG_SYS_CS_HOLDCYCLE 0x00000020
+
+/* Use SRAM for initial stack */
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE
+#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_SRAM_SIZE
+
+#define CONFIG_SYS_GBL_DATA_SIZE 0x100
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
+ CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
+
+#ifdef CONFIG_FSL_DIU_FB
+#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024)
+#else
+#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
+#endif
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 3 /* console on PSC3 */
+#define CONFIG_SYS_PSC3
+#if CONFIG_PSC_CONSOLE != 3
+#error CONFIG_PSC_CONSOLE must be 3
+#endif
+
+#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE
+#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR
+#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE
+#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR
+
+/*
+ * Clocks in use
+ */
+#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
+ CLOCK_SCCR1_LPC_EN | \
+ CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \
+ CLOCK_SCCR1_PSC_EN(7) | \
+ CLOCK_SCCR1_PSCFIFO_EN | \
+ CLOCK_SCCR1_DDR_EN | \
+ CLOCK_SCCR1_FEC_EN | \
+ CLOCK_SCCR1_TPR_EN)
+
+#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \
+ CLOCK_SCCR2_SPDIF_EN | \
+ CLOCK_SCCR2_DIU_EN | \
+ CLOCK_SCCR2_I2C_EN)
+
+
+#define CONFIG_CMDLINE_EDITING 1 /* command line history */
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_I2C_MULTI_BUS
+
+/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+
+/*
+ * EEPROM configuration for Atmel AT24C01:
+ * 8-bit addresses, 30ms write delay, 32-Byte Page Write Mode
+ */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 30
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC512x_FEC 1
+#define CONFIG_NET_MULTI
+#define CONFIG_PHY_ADDR 0x1F
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_FEC_AN_TIMEOUT 1
+#define CONFIG_HAS_ETH0
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_IN_FLASH 1
+/* This has to be a multiple of the flash sector size */
+#define CONFIG_ENV_ADDR 0xFFF40000
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SECT_SIZE 0x20000
+
+/* Address and size of Redundant Environment Sector */
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \
+ CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
+
+#define CONFIG_LOADS_ECHO 1
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_FUSE
+#define CONFIG_CMD_I2C
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_EXT2
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#endif
+
+#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2)
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION
+#endif /* defined(CONFIG_CMD_IDE) */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT "ac14xx> " /* Monitor Command Prompt */
+
+#ifdef CONFIG_CMD_KGDB
+# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS 32
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+/* decrementer freq: 1ms ticks */
+#define CONFIG_SYS_HZ 1000
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
+
+/* Cache Configuration */
+#define CONFIG_SYS_DCACHE_SIZE 32768
+#define CONFIG_SYS_CACHELINE_SIZE 32
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of 32 */
+#endif
+
+#define CONFIG_SYS_HID0_INIT 0x000000000
+#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
+ HID0_ICE)
+#define CONFIG_SYS_HID2 HID2_HBE
+
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01
+#define BOOTFLAG_WARM 0x02
+
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_TIMESTAMP
+
+#define CONFIG_HOSTNAME ac14xx
+#define CONFIG_BOOTFILE "ac14xx/uImage"
+#define CONFIG_ROOTPATH "/opt/eldk/ppc_6xx"
+
+/* default load addr for tftp and bootm */
+#define CONFIG_LOADADDR 400000
+
+#define CONFIG_BOOTDELAY 2 /* -1 disables auto-boot */
+
+/* XXX TODO need to specify the builtin environment */
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
+ "echo"
+
+#define CONFIG_EXTRA_ENV_SETTINGS_DEVEL \
+ "muster_nr=00\0" \
+ "fromram=run ramargs addip addtty; " \
+ "tftp ${fdt_addr_r} k6m2/ac14xx.dtb-${muster_nr}; " \
+ "tftp ${kernel_addr_r} k6m2/uImage-${muster_nr}; " \
+ "tftp ${ramdisk_addr_r} k6m2/uFS-${muster_nr}; " \
+ "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
+ "fromnfs=run nfsargs addip addtty; " \
+ "tftp ${fdt_addr_r} k6m2/ac14xx.dtb-${muster_nr}; " \
+ "tftp ${kernel_addr_r} k6m2/uImage-${muster_nr}; " \
+ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
+ "fromflash=run nfsargs addip addtty; " \
+ "bootm fc020000 - fc000000\0" \
+ "mtdargsrec=setenv bootargs root=/dev/mtdblock1 ro\0" \
+ "recovery=run mtdargsrec addip addtty; " \
+ "bootm ffd20000 - ffee0000\0" \
+ "production=run ramargs addip addtty; " \
+ "bootm fc020000 fc400000 fc000000\0" \
+ "mtdargs=setenv bootargs root=/dev/mtdblock1 ro\0" \
+ "prodmtd=run mtdargs addip addtty; " \
+ "bootm fc020000 - fc000000\0" \
+ ""
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "u-boot_addr_r=200000\0" \
+ "kernel_addr_r=600000\0" \
+ "fdt_addr_r=a00000\0" \
+ "ramdisk_addr_r=b00000\0" \
+ "u-boot_addr=FFF00000\0" \
+ "kernel_addr=FC020000\0" \
+ "fdt_addr=FC000000\0" \
+ "ramdisk_addr=FC400000\0" \
+ "verify=n\0" \
+ "ramdiskfile=ac14xx/uRamdisk\0" \
+ "u-boot=ac14xx/u-boot.bin\0" \
+ "bootfile=ac14xx/uImage\0" \
+ "fdtfile=ac14xx/ac14xx.dtb\0" \
+ "rootpath=/opt/eldk/ppc_6xx\n" \
+ "netdev=eth0\0" \
+ "consdev=ttyPSC0\0" \
+ "hostname=ac14xx\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}-${muster_nr}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} " \
+ "console=${consdev},${baudrate}\0" \
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr} - ${fdt_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
+ "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
+ "tftp ${fdt_addr_r} ${fdtfile};" \
+ "run nfsargs addip addtty;" \
+ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
+ "net_self=tftp ${kernel_addr_r} ${bootfile};" \
+ "tftp ${ramdisk_addr_r} ${ramdiskfile};" \
+ "tftp ${fdt_addr_r} ${fdtfile};" \
+ "run ramargs addip addtty;" \
+ "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0"\
+ "load=tftp ${u-boot_addr_r} ${u-boot}\0" \
+ "update=protect off ${u-boot_addr} +${filesize};" \
+ "era ${u-boot_addr} +${filesize};" \
+ "cp.b ${u-boot_addr_r} ${u-boot_addr} ${filesize}\0" \
+ CONFIG_EXTRA_ENV_SETTINGS_DEVEL \
+ "upd=run load update\0" \
+ ""
+
+#define CONFIG_BOOTCOMMAND "run production"
+
+#define CONFIG_FIT 1
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES 1
+
+#define OF_CPU "PowerPC,5121@0"
+#define OF_SOC_COMPAT "fsl,mpc5121-immr"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc@80000000/serial@11300"
+
+#endif /* __CONFIG_H */
--
cgit v1.2.1