From abee80d78933e8b21dc2bcafa6de8e69ee2253d7 Mon Sep 17 00:00:00 2001 From: Patrick Delaunay Date: Tue, 30 Jul 2019 19:16:11 +0200 Subject: pinctrl: stmfx: update pinconf settings Alignment with kernel driver. According to the following tab (coming from STMFX datasheet), updates have to done in stmfx_pinctrl_conf_set function: -"type" has to be set when "bias" is configured as "pull-up or pull-down" -PIN_CONFIG_DRIVE_PUSH_PULL should only be used when gpio is configured as output. There is so no need to check direction. DIR | TYPE | PUPD | MFX GPIO configuration ----|------|------|--------------------------------------------------- 1 | 1 | 1 | OUTPUT open drain with internal pull-up resistor ----|------|------|--------------------------------------------------- 1 | 1 | 0 | OUTPUT open drain with internal pull-down resistor ----|------|------|--------------------------------------------------- 1 | 0 | 0/1 | OUTPUT push pull no pull ----|------|------|--------------------------------------------------- 0 | 1 | 1 | INPUT with internal pull-up resistor ----|------|------|--------------------------------------------------- 0 | 1 | 0 | INPUT with internal pull-down resistor ----|------|------|--------------------------------------------------- 0 | 0 | 1 | INPUT floating ----|------|------|--------------------------------------------------- 0 | 0 | 0 | analog (GPIO not used, default setting) Signed-off-by: Patrick Delaunay --- drivers/pinctrl/pinctrl-stmfx.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/pinctrl') diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c index 5431df9813..0b5a0433cd 100644 --- a/drivers/pinctrl/pinctrl-stmfx.c +++ b/drivers/pinctrl/pinctrl-stmfx.c @@ -231,23 +231,23 @@ static int stmfx_pinctrl_conf_set(struct udevice *dev, unsigned int pin, switch (param) { case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: case PIN_CONFIG_BIAS_DISABLE: + case PIN_CONFIG_DRIVE_PUSH_PULL: + ret = stmfx_pinctrl_set_type(dev, pin, 0); + break; case PIN_CONFIG_BIAS_PULL_DOWN: + ret = stmfx_pinctrl_set_type(dev, pin, 1); + if (ret) + return ret; ret = stmfx_pinctrl_set_pupd(dev, pin, 0); break; case PIN_CONFIG_BIAS_PULL_UP: + ret = stmfx_pinctrl_set_type(dev, pin, 1); + if (ret) + return ret; ret = stmfx_pinctrl_set_pupd(dev, pin, 1); break; case PIN_CONFIG_DRIVE_OPEN_DRAIN: - if (dir == GPIOF_OUTPUT) - ret = stmfx_pinctrl_set_type(dev, pin, 1); - else - ret = stmfx_pinctrl_set_type(dev, pin, 0); - break; - case PIN_CONFIG_DRIVE_PUSH_PULL: - if (dir == GPIOF_OUTPUT) - ret = stmfx_pinctrl_set_type(dev, pin, 0); - else - ret = stmfx_pinctrl_set_type(dev, pin, 1); + ret = stmfx_pinctrl_set_type(dev, pin, 1); break; case PIN_CONFIG_OUTPUT: ret = stmfx_gpio_direction_output(plat->gpio, pin, arg); -- cgit v1.2.1