From affa020559bca31d6531e19cb1f009c22705a73d Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 31 Mar 2016 14:38:14 +0200 Subject: sunxi: Enable LDO3 and LDO4 at 2.8V on OLinuxIno Lime boards LDO3 and LDO4 are used to power port E resp. port G, which are exposed on gpio headers, so enable them at 2.8V as specified in the schematic. Signed-off-by: Hans de Goede --- configs/A20-OLinuXino-Lime_defconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'configs/A20-OLinuXino-Lime_defconfig') diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index e27698d0dd..151a0a3d3a 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -12,4 +12,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)" # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y CONFIG_ETH_DESIGNWARE=y +CONFIG_AXP_ALDO3_VOLT=2800 +CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_USB_EHCI_HCD=y -- cgit v1.2.1