From c402e8170245a0ca2b9398185638b349eeff10a3 Mon Sep 17 00:00:00 2001 From: Simon Goldschmidt Date: Fri, 2 Nov 2018 11:54:52 +0100 Subject: dts: arm: socfpga: merge gen5 devicetrees from linux Add -u-boot.dtsi files to keep the current U-Boot behaviour: - add u-boot,dm-pre-reloc where required - disable watchdog - set uart clock frequency - add gpio bank-name properties where appropriate: - make qspi work (add alias for spi0, fix compatible for flash) - enable usb (status okay, add alias for udc0) Adapt board dts files that are not in Linux to keep their old behaviour. Change licenses to SPDX. (Patman warnings/errors are in 1:1 copied files from Linux) Signed-off-by: Simon Goldschmidt --- arch/arm/dts/socfpga_cyclone5_socrates.dts | 85 ++++++++++++++++-------------- 1 file changed, 44 insertions(+), 41 deletions(-) (limited to 'arch/arm/dts/socfpga_cyclone5_socrates.dts') diff --git a/arch/arm/dts/socfpga_cyclone5_socrates.dts b/arch/arm/dts/socfpga_cyclone5_socrates.dts index 8cde9906a0..8d5d3996f6 100644 --- a/arch/arm/dts/socfpga_cyclone5_socrates.dts +++ b/arch/arm/dts/socfpga_cyclone5_socrates.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2014 Steffen Trumtrar + * Copyright (C) 2014 Steffen Trumtrar */ #include "socfpga_cyclone5.dtsi" @@ -9,83 +9,86 @@ model = "EBV SOCrates"; compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga"; - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = "serial0:115200n8"; - }; - aliases { - /* - * This allows the ethaddr uboot environment variable - * contents to be added to the gmac1 device tree blob. - */ ethernet0 = &gmac1; - udc0 = &usb1; }; - memory { + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { name = "memory"; device_type = "memory"; reg = <0x0 0x40000000>; /* 1GB */ }; - soc { - u-boot,dm-pre-reloc; + leds: gpio-leds { }; }; &gmac1 { - status = "okay"; phy-mode = "rgmii"; + status = "okay"; +}; + +&gpio0 { + status = "okay"; +}; - rxd0-skew-ps = <0>; - rxd1-skew-ps = <0>; - rxd2-skew-ps = <0>; - rxd3-skew-ps = <0>; - txen-skew-ps = <0>; - txc-skew-ps = <2600>; - rxdv-skew-ps = <0>; - rxc-skew-ps = <2000>; +&gpio1 { + status = "okay"; }; &i2c0 { status = "okay"; rtc: rtc@68 { - compatible = "stm,m41t82"; + compatible = "st,m41t82"; reg = <0x68>; }; }; -&mmc0 { +&leds { + compatible = "gpio-leds"; + + led0 { + label = "led:green:heartbeat"; + gpios = <&porta 28 1>; + linux,default-trigger = "heartbeat"; + }; + + led1 { + label = "led:green:D7"; + gpios = <&portb 19 1>; + }; + + led2 { + label = "led:green:D8"; + gpios = <&portb 25 1>; + }; +}; + +&mmc { status = "okay"; - u-boot,dm-pre-reloc; }; &qspi { status = "okay"; - flash0: n25q00@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q00", "spi-flash"; - reg = <0>; /* chip select */ - spi-max-frequency = <50000000>; + compatible = "n25q256a"; + reg = <0>; + spi-max-frequency = <100000000>; m25p,fast-read; - page-size = <256>; - block-size = <16>; /* 2^16, 64KB */ + cdns,read-delay = <4>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; cdns,tchsh-ns = <4>; cdns,tslch-ns = <4>; + status = "okay"; }; }; - -&usb1 { - disable-over-current; - status = "okay"; -}; - -&uart0 { - u-boot,dm-pre-reloc; -}; -- cgit v1.2.1