From 59028798ab5a1242cc9d578fa5c50a9f057630b2 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Tue, 30 Jun 2020 09:30:11 -0500 Subject: ARM: rmobile: Add Beacon EmbeddedWorks RZG2M Dev Kit The Beacon EmbeddedWorks kit is based on the R8A774A1 SoC also known as the RZ/G2M. The kit consists of a SOM + Baseboard and supports microSD, eMMC, Ethernet, a couple celular radios, two CAN interfaces, Bluetooth and WiFi. Signed-off-by: Adam Ford --- arch/arm/dts/beacon-renesom-som.dtsi | 312 +++++++++++++++++++++++++++++++++++ 1 file changed, 312 insertions(+) create mode 100644 arch/arm/dts/beacon-renesom-som.dtsi (limited to 'arch/arm/dts/beacon-renesom-som.dtsi') diff --git a/arch/arm/dts/beacon-renesom-som.dtsi b/arch/arm/dts/beacon-renesom-som.dtsi new file mode 100644 index 0000000000..6c16a2732a --- /dev/null +++ b/arch/arm/dts/beacon-renesom-som.dtsi @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020, Compass Electronics Group, LLC + */ + +#include + +/ { + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; + + osc_32k: osc_32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + wlan_pwrseq: wlan_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pca9654 1 GPIO_ACTIVE_LOW>; + clocks = <&osc_32k>; + clock-names = "ext_clock"; + post-power-on-delay-ms = <80>; + }; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&gpio6 { + usb_hub_reset { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&hscif0 { + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + max-speed = <4000000>; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&pca9654 2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>; + clocks = <&osc_32k>; + clock-names = "extclk"; + }; +}; + +&hscif2 { + status = "okay"; + pinctrl-0 = <&hscif2_pins>; + pinctrl-names = "default"; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + pca9654: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "i2c4_20_0", + "wl_reg_on", + "bt_reg_on", + "i2c4_20_3", + "i2c4_20_4", + "bt_dev_wake", + "i2c4_20_6", + "i2c4_20_7"; + }; + + pca9654_lte: gpio@21 { + compatible = "onnn,pca9654"; + reg = <0x21>; + interrupt-parent = <&gpio5>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "i2c4_21_0", + "zoe_pwr_on", + "zoe_extint", + "zoe_reset_n", + "sara_reset", + "i2c4_21_5", + "sara_pwr_off", + "sara_networking_status"; + }; + + eeprom@50 { + compatible = "microchip, at24c64", "atmel,24c64"; + pagesize = <32>; + read-only; /* Manufacturing EEPROM programmed at factory */ + reg = <0x50>; + }; + + rtc@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; + + versaclock5: versaclock_som@6a { + compatible = "idt,5p49v6965"; + reg = <0x6a>; + #clock-cells = <1>; + clocks = <&x304_clk>; + clock-names = "xin"; + /* du_dotclkin0, du_dotclkin2, usb_extal, avb_txcrefclk */ + assigned-clocks = <&versaclock5 1>, + <&versaclock5 2>, + <&versaclock5 3>, + <&versaclock5 4>; + assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>; + }; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + avb_pins: avb { + mux { + groups = "avb_link", "avb_mdio", "avb_mii"; + function = "avb"; + }; + + pins_mdio { + groups = "avb_mdio"; + drive-strength = <24>; + }; + + pins_mii_tx { + pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", + "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; + drive-strength = <12>; + }; + }; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + hscif0_pins: hscif0 { + groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + + hscif1_pins: hscif1 { + groups = "hscif1_data_a", "hscif1_ctrl_a"; + function = "hscif1"; + }; + + hscif2_pins: hscif2 { + groups = "hscif2_data_a"; + function = "hscif2"; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; + + scif5_pins: scif5 { + groups = "scif5_data_a"; + function = "scif5"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds"; + function = "sdhi3"; + power-source = <1800>; + }; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhi2 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhi2_pins>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + non-removable; + cap-power-off-card; + pm-ignore-notify; + keep-power-in-suspend; + mmc-pwrseq = <&wlan_pwrseq>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio1>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-1 = <&sdhi3_pins>; + pinctrl-names = "default", "state_uhs"; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; + +&usb_extal_clk { + clock-frequency = <50000000>; +}; + +&usb3s0_clk { + clock-frequency = <100000000>; +}; + +&vspb { + status = "okay"; +}; + +&vspi0 { + status = "okay"; +}; -- cgit v1.2.1