From 7ba0261810dd8924f0aeeb4cf2f12253106170b3 Mon Sep 17 00:00:00 2001 From: Yao Yuan Date: Sat, 5 Dec 2015 14:59:10 +0800 Subject: arm: ls1021a: merge SoC specific code in a separate file Create a soc.c file to put the code for soc special settings. Signed-off-by: Yuan Yao Reviewed-by: York Sun --- arch/arm/cpu/armv7/ls102xa/soc.c | 66 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 arch/arm/cpu/armv7/ls102xa/soc.c (limited to 'arch/arm/cpu/armv7/ls102xa/soc.c') diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c new file mode 100644 index 0000000000..0fdd6d4c86 --- /dev/null +++ b/arch/arm/cpu/armv7/ls102xa/soc.c @@ -0,0 +1,66 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +unsigned int get_soc_major_rev(void) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + unsigned int svr, major; + + svr = in_be32(&gur->svr); + major = SVR_MAJ(svr); + + return major; +} + +int arch_soc_init(void) +{ + struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; + unsigned int major; + +#ifdef CONFIG_FSL_QSPI + out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); +#endif + +#ifdef CONFIG_FSL_DCU_FB + out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN); +#endif + + /* Configure Little endian for SAI, ASRC and SPDIF */ + out_be32(&scfg->endiancr, SCFG_ENDIANCR_LE); + + /* + * Enable snoop requests and DVM message requests for + * Slave insterface S4 (A7 core cluster) + */ + out_le32(&cci->slave[4].snoop_ctrl, + CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN); + + major = get_soc_major_rev(); + if (major == SOC_MAJOR_VER_1_0) { + /* + * Set CCI-400 Slave interface S1, S2 Shareable Override + * Register All transactions are treated as non-shareable + */ + out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE); + out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE); + + /* Workaround for the issue that DDR could not respond to + * barrier transaction which is generated by executing DSB/ISB + * instruction. Set CCI-400 control override register to + * terminate the barrier transaction. After DDR is initialized, + * allow barrier transaction to DDR again */ + out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER); + } + + return 0; +} -- cgit v1.2.1