summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* regulator: fix: enable gpio when requestedMark Kettenis2020-06-152-3/+2
| | | | | | | | | | | | | | | | | | The fix in commit b7adcdd073c0 has the side-effect that the regulator will be disabled when requesting the relevant gpio in regulator_common_ofdata_to_platdata() and enabled in regulator_pre_probe() when the regulator was already enabled. This leads to a short interruption in the 3.3V power to the PCIe slot on the firefly-rk3399 which makes an ADATA SX8000NP NVMe SSD unhappy. Fix this by setting the GPIOD_IS_OUT_ACTIVE flag again when the 'regulator-boot-on' property is set, but check for this property explicitly instead of relying on the "boot_on" member of the uclass platdata. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Tested-by: Patrice Chotard <patrice.chotard@st.com>
* Merge branch '2020-06-15-misc-bugfixes'Tom Rini2020-06-156-25/+8
|\ | | | | | | - Assorted bug fixes
| * env: Kconfig: cosmetics: update comment for SYS_RELOC_GD_ENV_ADDRPatrick Delaunay2020-06-151-1/+1
| | | | | | | | | | | | | | | | | | Update the comment for SYS_RELOC_GD_ENV_ADDR as gd->env_addr is updated in board_r.c::initr_reloc_global_data() under the compilation flags CONFIG_SYS_RELOC_GD_ENV_ADDR Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * config: qemu: increase SYS_MALLOC_F_LENHeinrich Schuchardt2020-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Several configutation options require additional memory before relocation: * CONSOLE_RECORD * LOG * RSA The current default of 0x400 is too small to encompass them all. Increase the value of SYS_MALLOC_F_LEN to 0x2000 for ARCH_QEMU. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
| * Revert "lib: Improve _parse_integer_fixup_radix base 16 detection"Sean Anderson2020-06-151-17/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 0486497e2b5f4d36fa968a1a60fea358cbf70b65. The strtoul has well-defined semantics. It is defined by the C standard and POSIX. To quote the relevant section of the man pages, > If base is zero or 16, the string may then include a "0x" prefix, and the > number will be read in base 16; otherwise, a zero base is taken as 10 > (decimal) unless the next character is '0', in which case it is taken as > 8 (octal). Keeping these semantics is important for several reasons. First, it is very surprising for standard library functions to behave differently than usual. Every other implementation of strtoul has different semantics than the implementation in U-Boot at the moment. Second, it can result in very surprising results from small changes. For example, changing the string "1f" to "20" causes the parsed value to *decrease*. Forcing use of the "0x" prefix to specify hexidecimal numbers is a feature, not a bug. Lastly, this is slightly less performant, since the entire number is parsed twice. This fixes the str_simple_strtoul test failing with test/str_ut.c:29, run_strtoul(): expect_val == val: Expected 0x44b (1099), got 0x1099ab (1087915) test/str_ut.c:46, str_simple_strtoul(): 0 == run_strtoul(uts, str2, 0, 1099, 4): Expected 0x0 (0), got 0x1 (1) Signed-off-by: Sean Anderson <seanga2@gmail.com> CC: Michal Simek <michal.simek@xilinx.com> CC: Shiril Tichkule <shirilt@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * trivial: Fix booot occurencesMichal Simek2020-06-152-2/+2
| | | | | | | | | | | | | | | | | | | | s/booot/boot/g The first ase is booot instead of boot and second u-booot instead of u-boot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
| * optee: fix copy of optee reserved-memory nodeEtienne Carriere2020-06-151-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix the loop that parses FDT for a reserved memory node named "optee". Before this change, if at least one subnode was found in the reserved-memory node, the function endlessly looped since instruction continue returned back in the loop without updating variable subnode. This change fixes the issue by using a for loop. Fixes: 6ccb05eae01b ("image: fdt: copy possible optee nodes to a loaded devicetree") Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* | Merge tag 'mmc-2020-6-15' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini2020-06-156-34/+74
|\ \ | |/ |/| | | | | | | | | - fsl_esdhc sdr104 and hs200 fix and error path fix - fsl_esdhc workaround 3.3v io issue - ca_dw_mmc cleanup - presidio-asic emmc DT update.
| * mmc: fsl_esdhc: Gracefully fail on unsupported voltage switchMarek Vasut2020-06-151-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Unsupported voltage on voltage switch is not an error, do not print error message in such a case. This happens e.g. if the eMMC is already in 1V8 mode or when testing 1V2 mode operation on systems which only do 3V3/1V8 switching. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
| * mmc: fsl_esdhc: Fix SDR104 and HS200 supportMarek Vasut2020-06-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 3V3/1V8 switching could never have worked on any of the iMXes ever since 51313b49f2 ("mmc: fsl_esdhc: support SDR104 and HS200"), because that commit uses priv->vqmmc_dev when switching voltages on mode switch, while local vqmmc_dev in probe to store the regulator pointer. Those are two different variables with the same name. So the priv->vqmmc_dev was always NULL and thus voltage switch between modes never really suceeded. Fix this by assigning priv->vqmmc_dev with value of the vqmmc_dev in probe. Fixes: 51313b49f2 ("mmc: fsl_esdhc: support SDR104 and HS200") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
| * board: presidio-asic: update eMMC DT informationAlex Nemirovsky2020-06-151-3/+1
| | | | | | | | | | | | | | | | | | | | Change DT compatibility name to match change in driver's name. Remove unused io_ds and fifo_mode fields from DT. Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Peng Fan <peng.fan@nxp.com> CC: Jaehoon Chung <jh80.chung@samsung.com> CC: Tom Rini <trini@konsulko.com>
| * mmc: ca_dw_mmc: Misc cleanup of driverArthur Li2020-06-151-22/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | - Rename DT compatible name - Remove uneccessary if-statement to support 8-bit buswidth - Remove redundant error msg - Use symbolic constants in switch statement Signed-off-by: Arthur Li <arthur.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Peng Fan <peng.fan@nxp.com> CC: Jaehoon Chung <jh80.chung@samsung.com> CC: Tom Rini <trini@konsulko.com>
| * mmc: fsl_esdhc: workaround for hardware 3.3v IO reliability issueYangbo Lu2020-06-153-2/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When eSDHC operates at 3.3v, damage can accumulate in an internal level shifter at a higher than expected rate. The faster the interface runs, the more damage accumulates. This issue now is found on LX2160A eSDHC1 for only SD card. The hardware workaround is recommended to use an on-board level shifter that is 1.8v on SoC side and 3.3v on SD card side. For boards without hardware workaround, this option could be enabled, ensuring 1.8v IO voltage and disabling eSDHC if no card. This option assumes no hotplug, and u-boot has to make all the way to to linux to use 1.8v UHS-I speed mode if has card. If you do not want the workaround for better user experience, of course you can choose to not select it running eSDHC in unsafe mode. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com>
| * mmc: fsl_esdhc: read register once for card inserted statusYangbo Lu2020-06-151-5/+4
| | | | | | | | | | | | | | No need to poll register for card inserted status. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com>
* | Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usbWIP/14Jun2020Tom Rini2020-06-142-224/+265
|\ \ | | | | | | | | | - eth/r8152: update the firmware
| * | eth/r8152: update the firmwareHayes Wang2020-06-142-224/+265
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the firmware to improve compatibility for none-intel USB host controller. The more information is as following. The device has auto-installed driver feature - via switch CD-ROM/NIC mode. But in some corner cases, it would switch to CD-ROM unexpected. This issue results in Lan Function Disabled. While USB PHY transits to P3 from P0 due to the absent of transmitter control, it would issues undefined signal to its link partner. Some Down Stream Port misidentify the undefined signal as wakeup signal. So the link state will not keep in suspend even the system is idle. Signed-off-by: Hayes Wang <hayeswang@realtek.com>
* | | Merge https://gitlab.denx.de/u-boot/custodians/u-boot-socfpgaTom Rini2020-06-141-0/+4
|\ \ \ | |_|/ |/| | | | | - cyclone5 bugfix
| * | arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-nsLey Foon Tan2020-06-141-0/+4
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit e71b6f6622d6 ("i2c: designware_i2c: Rewrite timing calculation") change the hcnt and lcnt timing calculation. New timing calculation is based on calculation from Designware i2c databook. After this new timing calculation, hcnt will have negative value with i2c-scl-falling-time-ns 5000 that set in socfpga_cyclone5_socdk.dts. This patch overwrite i2c-scl-falling-time-ns to 300ns (default SCL fall time used in Designware i2c driver) for Uboot. Before the fix: => i2c dev 0 Setting bus to 0 Failure changing bus number (-22) After the fix: => i2c dev 0 Setting bus to 0 => i2c probe Valid chip addresses: 17 51 55 5B 5C 5E 66 68 70 Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
* | Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spiWIP/12Jun2020Tom Rini2020-06-1235-2212/+130
|\ \ | |/ |/| | | | | | | | | - Drop davinci, mxs spi nondm code - Zap nondm soft_spi - Switch few board to DM_SPI - Drop omap3_pandora, pcm051 boards
| * am335x: sl50: Enable DM_SPIJagan Teki2020-06-111-0/+1
| | | | | | | | | | | | | | | | | | | | Enable DM_SPI for am355x sl50 board. Build is fine, but not tested. Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
| * configs: igep00x0: Enable DM_SPIJagan Teki2020-06-111-0/+1
| | | | | | | | | | | | | | | | | | | | Enable DM_SPI for igep00x0 board. Build is fine, but not tested. Cc: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
| * arm: Remove pcm051 boardJagan Teki2020-06-1110-691/+0
| | | | | | | | | | | | | | | | | | | | OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Acked-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * arm: Remove omap3_pandora_defconfig boardJagan Teki2020-06-119-669/+0
| | | | | | | | | | | | | | | | | | | | OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Acked-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * spi: davinci: Drop non-dm codeJagan Teki2020-06-113-172/+6
| | | | | | | | | | | | | | | | | | Now all boards which are using davinci SPI driver have moved to SPL_DM so drop the unneeded non-dm code. Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
| * ks2_evm: Switch to DM_SPL, SPL_OF_CONTROLJagan Teki2020-06-115-8/+8
| | | | | | | | | | | | | | | | | | This would make SPL build to DM_SPL, SPL_OF_CONTROL. Build fine with but not tested. Cc: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * spi: atmel: Drop atmel_spi.hJagan Teki2020-06-111-3/+85
| | | | | | | | | | | | | | | | | | atmel_spi.h has register offsets, and atmel_spi_slave structure, move it into .c file for better readability and drop atmel_spi.h Cc: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * spi: atmel: Remove nondm codeJagan Teki2020-06-112-209/+0
| | | | | | | | | | | | | | | | | | atmel spi driver now accessible only when DM_SPI enabled. So, remove nondm code. Cc: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * spi: atmel: Drop CONFIG_SYS_SPI_WRITE_TOUTJagan Teki2020-06-112-5/+0
| | | | | | | | | | | | | | Drop CONFIG_SYS_SPI_WRITE_TOUT there is no code usage. Cc: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * spi: fsl_dspi: Drop nondm codeJagan Teki2020-06-111-132/+0
| | | | | | | | | | | | | | Drop the nondm code from fsl_dspi.c since there is no board or any other code using for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * spi: Zap SOFT_SPI (non-dm)Jagan Teki2020-06-113-176/+6
| | | | | | | | | | | | | | | | | | | | - Deadline for DM migration already passed by months. - Sent couple of zap patches and - No response on dm conversation hence removed the driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * spi: mxs: Code cleanupJagan Teki2020-06-111-19/+18
| | | | | | | | | | | | | | | | | | Order the macros, private structures and simple functions in a proper way to have more code readability. No functionality changed. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * spi: mxs: Drop nondm codeJagan Teki2020-06-112-129/+6
|/ | | | | | | | | | | Deadline for DM migration already passed by months and no response on full dm conversation hence removed the nondm code. Note: Look like there is no user for nondm code for this driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* Merge tag 'u-boot-imx-20200609' of ↵WIP/09Jun2020Tom Rini2020-06-0920-71/+132
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2020.07 ----------------- - mx53: mx53menlo Convert to DM_ETH, fix fail boot - imx8mp_evk: fix boot issue - MX6, display5: fix environment - drop warnings (watchdog) for i.MX8mm i.mx8mp - enable bootaux for i.MX8M Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/695929999
| * Revert "imx: rom api: fix image offset computation"Stefano Babic2020-06-091-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 1f63ee656698724bcdc4e711b4ccd267f6bf64ab. As reported by Ye Li on ML: 1. Removing the image_offset will break secondary (redundant) boot support for sd and emmc. 2. When booting from emmc boot partition, the image_offset is 0. But the flash.bin generated by mkimage with imximage-8mp-lpddr4.cfg is for sd. It expects to be burn at 32KB offset. The fit offset 0x60000 has already included the 32KB offset. So when you burn this flash.bin to emmc boot partition at offset 0, the fit offset should subtract the 32KB (0x60000 - 0x8000). Signed-off-by: Stefano Babic <sbabic@denx.de>
| * ARM: dts: imx: m53menlo: Convert to DM_ETHMarek Vasut2020-06-082-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | Convert the board to DM_ETH instead of legacy networking. This requires a minor addition to the DT to satisfy the requirement for specifying a PHY node. No functional change from board user perspective. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * ARM: imx: m53menlo: Do not fail boot on invalid splash screenMarek Vasut2020-06-081-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | None of these splash screen loading errors are so critical as to justify complete failure to boot, so just print error message as needed and return 0, the boot can very likely continue without the splash. Fix a couple of missing free(dst) instances as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * ARM: imx: ddr: Add missing PHY resetMarek Vasut2020-06-082-3/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The iMX7D RM 9.2.4.9.3 Power removal flow Table 9-11. Re-enabling power explicitly says both the DDR controller and the PHY must be reset in the correct sequence. Currently the code only resets the controller. This leads to a misbehavior where the system brings the DRAM up after reboot, but the DRAM is unstable. Add the missing reset. The easiest way to trigger this is by triggering WDT without having the WDT assert WDOG_B signal, i.e. mw.w 0x30280000 0x25 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * power: pmic: Add SPL Kconfig entry for PFUZE100Marek Vasut2020-06-081-0/+7
| | | | | | | | | | | | | | | | | | | | | | Add Kconfig entry for the PFUZE PMIC, SPL variant. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
| * imx: imx8mp_evk: fix boot issuePeng Fan2020-06-082-8/+7
| | | | | | | | | | | | | | | | | | | | | | The u-boot-spl.bin pad with ddr firmware conflicts with the CONFIG_MALLOC_F_ADDR area, the ddr firmware will be overwritten by malloc in SPL stage and cause ddr initialization not able to finish. So update the related addresses to fix the issue. Reported-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
| * imx8mp_evk: spl: no need the code since spl framework could do thatPeng Fan2020-06-081-5/+1
| | | | | | | | | | | | | | | | We no need invoke the code, since spl framework could help us do that. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
| * imx8mp_evk: spl: use spl_early_initPeng Fan2020-06-081-6/+6
| | | | | | | | | | | | | | | | | | Use spl_early_init to replace spl_init, spl_init will be invoked in board_init_r, we only need use spl_early_init to setup malloc and scan early dt. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
| * imx8mp_evk: spl: drop timer_initPeng Fan2020-06-081-2/+0
| | | | | | | | | | | | | | | | timer_init has been invoked in arch_cpu_init, no need to invoke it again in board code. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
| * imx8mp_evk: spl: drop useless codePeng Fan2020-06-081-14/+0
| | | | | | | | | | | | | | | | Drop useless getting ccm device, there is no need to explicted do this in board code, and we not enable SPL CLK currently. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
| * imx: Update MTD partitions layout for display5 (i.MX6Q) boardLukasz Majewski2020-06-083-5/+6
| | | | | | | | | | | | | | This change updates the MTD partition layout on SPI-NOR memory for display5 board. Signed-off-by: Lukasz Majewski <lukma@denx.de>
| * imx: rom api: fix image offset computationSébastien Szymanski2020-06-081-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When not booting from FlexSPI, the offset computation is: offset = image_offset + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512 - 0x8000; When booting from SD card or eMMC user partition, image_offset is 0x8000. It is useless to add and remove 0x8000. When booting from other device, image_offset is 0 so this computation is wrong. Simplfy this computation to work on all booting devices. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
| * verdin-imx8mm: Select the watchdog driverFabio Estevam2020-06-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt. Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
| * imx8mp_evk: Select the watchdog driverFabio Estevam2020-06-081-1/+0
| | | | | | | | | | | | | | | | | | | | Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt. Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced. Signed-off-by: Fabio Estevam <festevam@gmail.com>
| * imx8mm_beacon: Select the watchdog driverFabio Estevam2020-06-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt. Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Adam Ford <aford173@gmail.com>
| * imx8mn_ddr4_evk: Select the watchdog driverFabio Estevam2020-06-081-1/+0
| | | | | | | | | | | | | | | | | | | | Currently watchdog driver is not selected, which causes system to reboot after staying 60s in the U-Boot prompt. Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced. Signed-off-by: Fabio Estevam <festevam@gmail.com>
| * imx8mm_evk: Select the watchdog driverFabio Estevam2020-06-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the watchdog driver is not selected, which causes the following warnings in both SPL and U-Boot proper: U-Boot SPL 2020.07-rc1-00387-g67887903af (May 07 2020 - 23:49:27 -0300) Normal Boot WDT: Started without servicing (60s timeout) Trying to boot from MMC1 U-Boot 2020.07-rc1-00387-g67887903af (May 07 2020 - 23:49:27 -0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz Reset cause: POR Model: FSL i.MX8MM EVK board DRAM: 2 GiB WDT: Started without servicing (60s timeout) .... System reboots after staying 60s in the U-Boot prompt. Fix this problem by enabling CONFIG_WATCHDOG so that watchdog can be properly serviced. Suggested-by: Marek Vasut <marex@denx.de> Signed-off-by: Fabio Estevam <festevam@gmail.com>
View Lorry Controller Status