diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 115 |
1 files changed, 8 insertions, 107 deletions
@@ -622,14 +622,11 @@ ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/') ######################################################################### ## Coldfire ######################################################################### - -astro_mcf5373l_config \ -astro_mcf5373l_RAM_config : unconfig - @$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro - M52277EVB_config \ M52277EVB_spansion_config \ M52277EVB_stmicro_config : unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/freescale/m52277evb @case "$@" in \ M52277EVB_config) FLASH=SPANSION;; \ M52277EVB_spansion_config) FLASH=SPANSION;; \ @@ -638,19 +635,19 @@ M52277EVB_stmicro_config : unconfig if [ "$${FLASH}" = "SPANSION" ] ; then \ echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \ - cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ echo "CONFIG_SYS_TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \ - cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \ fi @$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale M5235EVB_config \ M5235EVB_Flash16_config \ M5235EVB_Flash32_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/freescale/m5235evb @case "$@" in \ M5235EVB_config) FLASH=16;; \ M5235EVB_Flash16_config) FLASH=16;; \ @@ -659,63 +656,36 @@ M5235EVB_Flash32_config: unconfig if [ "$${FLASH}" != "16" ] ; then \ echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \ echo "CONFIG_SYS_TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ - cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \ else \ echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ - cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ fi @$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale -cobra5272_config : unconfig - @$(MKCONFIG) $@ m68k mcf52x2 cobra5272 - EB+MCF-EV123_config : unconfig - @mkdir -p $(obj)include @mkdir -p $(obj)board/BuS/EB+MCF-EV123 @echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS EB+MCF-EV123_internal_config : unconfig - @mkdir -p $(obj)include @mkdir -p $(obj)board/BuS/EB+MCF-EV123 @echo "CONFIG_SYS_TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS -M5329AFEE_config \ -M5329BFEE_config : unconfig - @case "$@" in \ - M5329AFEE_config) NAND=0;; \ - M5329BFEE_config) NAND=16;; \ - esac; \ - if [ "$${NAND}" != "0" ] ; then \ - echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ - fi - @$(MKCONFIG) -n $@ -a M5329EVB m68k mcf532x m5329evb freescale - -M5373EVB_config : unconfig - @case "$@" in \ - M5373EVB_config) NAND=16;; \ - esac; \ - if [ "$${NAND}" != "0" ] ; then \ - echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ - fi - @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale - M54451EVB_config \ M54451EVB_stmicro_config : unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/freescale/m54451evb @case "$@" in \ M54451EVB_config) FLASH=NOR;; \ M54451EVB_stmicro_config) FLASH=STMICRO;; \ esac; \ if [ "$${FLASH}" = "NOR" ] ; then \ echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ - cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ echo "CONFIG_SYS_TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ - cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ fi; \ echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; @$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale @@ -728,6 +698,8 @@ M54455EVB_a66_config \ M54455EVB_i33_config \ M54455EVB_i66_config \ M54455EVB_stm33_config : unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)board/freescale/m54455evb @case "$@" in \ M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \ M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \ @@ -741,91 +713,20 @@ M54455EVB_stm33_config : unconfig if [ "$${FLASH}" = "INTEL" ] ; then \ echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ - cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ fi; \ if [ "$${FLASH}" = "ATMEL" ] ; then \ echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ echo "CONFIG_SYS_TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ - cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ echo "CONFIG_SYS_TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ - cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ fi; \ echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ $(XECHO) "... with $${FREQ}Hz input clock" @$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale -M5475AFE_config \ -M5475BFE_config \ -M5475CFE_config \ -M5475DFE_config \ -M5475EFE_config \ -M5475FFE_config \ -M5475GFE_config : unconfig - @case "$@" in \ - M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ - M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ - M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ - M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ - M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ - M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ - M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ - esac; \ - echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \ - echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ - echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ - if [ "$${RAM1}" != "0" ] ; then \ - echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ - fi; \ - if [ "$${CODE}" != "0" ] ; then \ - echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ - fi; \ - if [ "$${VID}" == "1" ] ; then \ - echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ - fi; \ - if [ "$${USB}" == "1" ] ; then \ - echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ - fi - @$(MKCONFIG) -n $@ -a M5475EVB m68k mcf547x_8x m547xevb freescale - -M5485AFE_config \ -M5485BFE_config \ -M5485CFE_config \ -M5485DFE_config \ -M5485EFE_config \ -M5485FFE_config \ -M5485GFE_config \ -M5485HFE_config : unconfig - @case "$@" in \ - M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ - M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ - M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ - M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ - M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ - M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ - M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ - M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \ - esac; \ - echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \ - echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ - echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ - if [ "$${RAM1}" != "0" ] ; then \ - echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ - fi; \ - if [ "$${CODE}" != "0" ] ; then \ - echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ - fi; \ - if [ "$${VID}" == "1" ] ; then \ - echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ - fi; \ - if [ "$${USB}" == "1" ] ; then \ - echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ - fi - @$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale - #======================================================================== # ARM #======================================================================== |