diff options
| author | Lukasz Majewski <lukma@denx.de> | 2019-06-24 15:50:48 +0200 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2019-07-19 14:50:30 +0200 |
| commit | 6bb15d6f07a8348cca07f2f245f3025cb79e7680 (patch) | |
| tree | 9354db4ddf38f1a73767d24d83cd8a7cacbf0bad /drivers/clk | |
| parent | 4ab8e783f33d80a3875e990f3069f21018379b36 (diff) | |
| download | u-boot-6bb15d6f07a8348cca07f2f245f3025cb79e7680.tar.gz | |
clk: sandbox: Adjust clk-divider to emulate reading its value from HW
The generic divider clock code for CCF requires reading the divider value
from HW registers. As sandbox by design has readl() as no-op it was
necessary to provide this value in the other way.
The new field in the divider structure (accessible only when sandbox is
run) has been introduced for this purpose.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Diffstat (limited to 'drivers/clk')
| -rw-r--r-- | drivers/clk/clk-divider.c | 10 |
1 files changed, 9 insertions, 1 deletions
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index 3348d97829..6921c76a48 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -74,7 +74,12 @@ static ulong clk_divider_recalc_rate(struct clk *clk) unsigned long parent_rate = clk_get_parent_rate(clk); unsigned int val; - val = readl(divider->reg) >> divider->shift; +#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF) + val = divider->io_divider_val; +#else + val = readl(divider->reg); +#endif + val >>= divider->shift; val &= clk_div_mask(divider->width); return divider_recalc_rate(clk, parent_rate, val, divider->table, @@ -112,6 +117,9 @@ static struct clk *_register_divider(struct device *dev, const char *name, div->width = width; div->flags = clk_divider_flags; div->table = table; +#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF) + div->io_divider_val = *(u32 *)reg; +#endif /* register the clock */ clk = &div->clk; |