Kconfig; Drop CONFIG_IDE_TI_CARDBUS and associated driver

This driver is not used by any board. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

2 files changed, 0 insertions, 624 deletions

diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index b7e6188429..7d8cb5cb4c 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -5,5 +5,4 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-$(CONFIG_IDE_TI_CARDBUS) += ti_pci1410a.o
 obj-$(CONFIG_MARUBUN_PCCARD) += marubun_pcmcia.o
diff --git a/drivers/pcmcia/ti_pci1410a.c b/drivers/pcmcia/ti_pci1410a.c
deleted file mode 100644
index d83db3f022..0000000000
--- a/drivers/pcmcia/ti_pci1410a.c
+++ /dev/null
@@ -1,623 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- ********************************************************************
- *
- * Lots of code copied from:
- *
- * m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series.
- * (C) 1999-2000 Magnus Damm <damm@bitsmart.com>
- *
- * "The ExCA standard specifies that socket controllers should provide
- * two IO and five memory windows per socket, which can be independently
- * configured and positioned in the host address space and mapped to
- * arbitrary segments of card address space. " - David A Hinds. 1999
- *
- * This controller does _not_ meet the ExCA standard.
- *
- * m8xx pcmcia controller brief info:
- * + 8 windows (attrib, mem, i/o)
- * + up to two slots (SLOT_A and SLOT_B)
- * + inputpins, outputpins, event and mask registers.
- * - no offset register. sigh.
- *
- * Because of the lacking offset register we must map the whole card.
- * We assign each memory window PCMCIA_MEM_WIN_SIZE address space.
- * Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO
- * * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE.
- * The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE.
- * They are maximum 64KByte each...
- */
-
-
-#undef DEBUG		/**/
-
-/*
- * PCMCIA support
- */
-#include <common.h>
-#include <command.h>
-#include <config.h>
-#include <pci.h>
-#include <asm/io.h>
-
-#include <pcmcia.h>
-
-#if defined(CONFIG_CMD_PCMCIA)
-
-int pcmcia_on(int ide_base_bus);
-
-static int  hardware_disable(int slot);
-static int  hardware_enable(int slot);
-static int  voltage_set(int slot, int vcc, int vpp);
-static void print_funcid(int func);
-static void print_fixed(volatile char *p);
-static int  identify(volatile char *p);
-static int  check_ide_device(int slot, int ide_base_bus);
-
-
-/* ------------------------------------------------------------------------- */
-
-
-const char *indent = "\t   ";
-
-/* ------------------------------------------------------------------------- */
-
-
-static struct pci_device_id supported[] = {
-	{ PCI_VENDOR_ID_TI, 0xac50 }, /* Ti PCI1410A */
-	{ PCI_VENDOR_ID_TI, 0xac56 }, /* Ti PCI1510 */
-	{ }
-};
-
-static pci_dev_t devbusfn;
-static u32 socket_base;
-static u32 pcmcia_cis_ptr;
-
-int pcmcia_on(int ide_base_bus)
-{
-	u16 dev_id;
-	u32 socket_status;
-	int slot = 0;
-	int cis_len;
-	u16 io_base;
-	u16 io_len;
-
-	/*
-	 * Find the CardBus PCI device(s).
-	 */
-	if ((devbusfn = pci_find_devices(supported, 0)) < 0) {
-		printf("Ti CardBus: not found\n");
-		return 1;
-	}
-
-	pci_read_config_word(devbusfn, PCI_DEVICE_ID, &dev_id);
-
-	if (dev_id == 0xac56) {
-		debug("Enable PCMCIA Ti PCI1510\n");
-	} else {
-		debug("Enable PCMCIA Ti PCI1410A\n");
-	}
-
-	pcmcia_cis_ptr = CONFIG_SYS_PCMCIA_CIS_WIN;
-	cis_len = CONFIG_SYS_PCMCIA_CIS_WIN_SIZE;
-
-	io_base = CONFIG_SYS_PCMCIA_IO_WIN;
-	io_len = CONFIG_SYS_PCMCIA_IO_WIN_SIZE;
-
-	/*
-	 * Setup the PCI device.
-	 */
-	pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &socket_base);
-	socket_base &= ~0xf;
-
-	socket_status = readl(socket_base+8);
-	if ((socket_status & 6) == 0) {
-		printf("Card Present: ");
-
-		switch (socket_status & 0x3c00) {
-
-		case 0x400:
-			printf("5V ");
-			break;
-		case 0x800:
-			printf("3.3V ");
-			break;
-		case 0xc00:
-			printf("3.3/5V ");
-			break;
-		default:
-			printf("unsupported Vcc ");
-			break;
-		}
-		switch (socket_status & 0x30) {
-		case 0x10:
-			printf("16bit PC-Card\n");
-			break;
-		case 0x20:
-			printf("32bit CardBus Card\n");
-			break;
-		default:
-			printf("8bit PC-Card\n");
-			break;
-		}
-	}
-
-
-	writeb(0x41, socket_base + 0x806); /* Enable I/O window 0 and memory window 0 */
-	writeb(0x0e, socket_base + 0x807); /* Reset I/O window options */
-
-	/* Careful: the linux yenta driver do not seem to reset the offset
-	 * in the i/o windows, so leaving them non-zero is a problem */
-
-	writeb(io_base & 0xff, socket_base + 0x808); /* I/O window 0 base address */
-	writeb(io_base>>8, socket_base + 0x809);
-	writeb((io_base + io_len - 1) & 0xff, socket_base + 0x80a); /* I/O window 0 end address */
-	writeb((io_base + io_len - 1)>>8, socket_base + 0x80b);
-	writeb(0x00, socket_base + 0x836);      /* I/O window 0 offset address 0x000 */
-	writeb(0x00, socket_base + 0x837);
-
-
-	writeb((pcmcia_cis_ptr&0x000ff000) >> 12,
-	       socket_base + 0x810); /* Memory window 0 start address bits 19-12 */
-	writeb((pcmcia_cis_ptr&0x00f00000) >> 20,
-	       socket_base + 0x811);  /* Memory window 0 start address bits 23-20 */
-	writeb(((pcmcia_cis_ptr+cis_len-1) & 0x000ff000) >> 12,
-		socket_base + 0x812); /* Memory window 0 end address bits 19-12*/
-	writeb(((pcmcia_cis_ptr+cis_len-1) & 0x00f00000) >> 20,
-		socket_base + 0x813); /* Memory window 0 end address bits 23-20*/
-	writeb(0x00, socket_base + 0x814); /* Memory window 0 offset bits 19-12 */
-	writeb(0x40, socket_base + 0x815); /* Memory window 0 offset bits 23-20 and
-					    * options (read/write, attribute access) */
-	writeb(0x00, socket_base + 0x816); /* ExCA card-detect and general control  */
-	writeb(0x00, socket_base + 0x81e); /* ExCA global control (interrupt modes) */
-
-	writeb((pcmcia_cis_ptr & 0xff000000) >> 24,
-	       socket_base + 0x840); /* Memory window address bits 31-24 */
-
-
-	/* turn off voltage */
-	if (voltage_set(slot, 0, 0)) {
-		return 1;
-	}
-
-	/* Enable external hardware */
-	if (hardware_enable(slot)) {
-		return 1;
-	}
-
-	if (check_ide_device(slot, ide_base_bus)) {
-		return 1;
-	}
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-
-#if defined(CONFIG_CMD_PCMCIA)
-int pcmcia_off (void)
-{
-	int slot = 0;
-
-	writeb(0x00, socket_base + 0x806); /* disable all I/O and memory windows */
-
-	writeb(0x00, socket_base + 0x808); /* I/O window 0 base address */
-	writeb(0x00, socket_base + 0x809);
-	writeb(0x00, socket_base + 0x80a); /* I/O window 0 end address */
-	writeb(0x00, socket_base + 0x80b);
-	writeb(0x00, socket_base + 0x836); /* I/O window 0 offset address  */
-	writeb(0x00, socket_base + 0x837);
-
-	writeb(0x00, socket_base + 0x80c); /* I/O window 1 base address  */
-	writeb(0x00, socket_base + 0x80d);
-	writeb(0x00, socket_base + 0x80e); /* I/O window 1 end address  */
-	writeb(0x00, socket_base + 0x80f);
-	writeb(0x00, socket_base + 0x838); /* I/O window 1 offset address  */
-	writeb(0x00, socket_base + 0x839);
-
-	writeb(0x00, socket_base + 0x810); /* Memory window 0 start address */
-	writeb(0x00, socket_base + 0x811);
-	writeb(0x00, socket_base + 0x812); /* Memory window 0 end address  */
-	writeb(0x00, socket_base + 0x813);
-	writeb(0x00, socket_base + 0x814); /* Memory window 0 offset */
-	writeb(0x00, socket_base + 0x815);
-
-	writeb(0xc0, socket_base + 0x840); /* Memory window 0 page address */
-
-
-	/* turn off voltage */
-	voltage_set(slot, 0, 0);
-
-	/* disable external hardware */
-	printf ("Shutdown and Poweroff Ti PCI1410A\n");
-	hardware_disable(slot);
-
-	return 0;
-}
-
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-
-#define	MAX_TUPEL_SZ	512
-#define MAX_FEATURES	4
-int ide_devices_found;
-static int check_ide_device(int slot, int ide_base_bus)
-{
-	volatile char *ident = NULL;
-	volatile char *feature_p[MAX_FEATURES];
-	volatile char *p, *start;
-	int n_features = 0;
-	uchar func_id = ~0;
-	uchar code, len;
-	ushort config_base = 0;
-	int found = 0;
-	int i;
-	u32 socket_status;
-
-	debug ("PCMCIA MEM: %08X\n", pcmcia_cis_ptr);
-
-	socket_status = readl(socket_base+8);
-
-	if ((socket_status & 6) != 0 || (socket_status & 0x20) != 0) {
-		printf("no card or CardBus card\n");
-		return 1;
-	}
-
-	start = p = (volatile char *) pcmcia_cis_ptr;
-
-	while ((p - start) < MAX_TUPEL_SZ) {
-
-		code = *p; p += 2;
-
-		if (code == 0xFF) { /* End of chain */
-			break;
-		}
-
-		len = *p; p += 2;
-#if defined(DEBUG) && (DEBUG > 1)
-		{
-			volatile uchar *q = p;
-			printf ("\nTuple code %02x  length %d\n\tData:",
-				code, len);
-
-			for (i = 0; i < len; ++i) {
-				printf (" %02x", *q);
-				q+= 2;
-			}
-		}
-#endif	/* DEBUG */
-		switch (code) {
-		case CISTPL_VERS_1:
-			ident = p + 4;
-			break;
-		case CISTPL_FUNCID:
-			/* Fix for broken SanDisk which may have 0x80 bit set */
-			func_id = *p & 0x7F;
-			break;
-		case CISTPL_FUNCE:
-			if (n_features < MAX_FEATURES)
-				feature_p[n_features++] = p;
-			break;
-		case CISTPL_CONFIG:
-			config_base = (*(p+6) << 8) + (*(p+4));
-			debug ("\n## Config_base = %04x ###\n", config_base);
-		default:
-			break;
-		}
-		p += 2 * len;
-	}
-
-	found = identify(ident);
-
-	if (func_id != ((uchar)~0)) {
-		print_funcid (func_id);
-
-		if (func_id == CISTPL_FUNCID_FIXED)
-			found = 1;
-		else
-			return 1;	/* no disk drive */
-	}
-
-	for (i=0; i<n_features; ++i) {
-		print_fixed(feature_p[i]);
-	}
-
-	if (!found) {
-		printf("unknown card type\n");
-		return 1;
-	}
-
-	/* select config index 1 */
-	writeb(1, pcmcia_cis_ptr + config_base);
-
-#if 0
-	printf("Confiuration Option Register: %02x\n", readb(pcmcia_cis_ptr + config_base));
-	printf("Card Confiuration and Status Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 2));
-	printf("Pin Replacement Register Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 4));
-	printf("Socket and Copy Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 6));
-#endif
-	ide_devices_found |= (1 << (slot+ide_base_bus));
-
-	return 0;
-}
-
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
-	u32 socket_control;
-	int reg=0;
-
-	switch (slot) {
-	case 0:
-		reg = socket_base + 0x10;
-		break;
-	default:
-		return 1;
-	}
-
-	socket_control = 0;
-
-
-	switch (vcc) {
-	case 50:
-		socket_control |= 0x20;
-		break;
-	case 33:
-		socket_control |= 0x30;
-		break;
-	case 0:
-	default: ;
-	}
-
-	switch (vpp) {
-	case 120:
-		socket_control |= 0x1;
-		break;
-	case 50:
-		socket_control |= 0x2;
-		break;
-	case 33:
-		socket_control |= 0x3;
-		break;
-	case 0:
-	default: ;
-	}
-
-	writel(socket_control, reg);
-
-	debug ("voltage_set: Ti PCI1410A Slot %d, Vcc=%d.%d, Vpp=%d.%d\n",
-		slot, vcc/10, vcc%10, vpp/10, vpp%10);
-
-	udelay(500);
-	return 0;
-}
-
-
-static int hardware_enable(int slot)
-{
-	u32 socket_status;
-	u16 brg_ctrl;
-	int is_82365sl;
-
-	socket_status = readl(socket_base+8);
-
-	if ((socket_status & 6) == 0) {
-
-		switch (socket_status & 0x3c00) {
-
-		case 0x400:
-			printf("5V ");
-			voltage_set(slot, 50, 0);
-			break;
-		case 0x800:
-			voltage_set(slot, 33, 0);
-			break;
-		case 0xc00:
-			voltage_set(slot, 33, 0);
-			break;
-		default:
-			voltage_set(slot, 0, 0);
-			break;
-		}
-	} else {
-		voltage_set(slot, 0, 0);
-	}
-
-	pci_read_config_word(devbusfn, PCI_BRIDGE_CONTROL, &brg_ctrl);
-	brg_ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
-	pci_write_config_word(devbusfn, PCI_BRIDGE_CONTROL, brg_ctrl);
-	is_82365sl = ((readb(socket_base+0x800) & 0x0f) == 2);
-	writeb(is_82365sl?0x90:0x98, socket_base+0x802);
-	writeb(0x67, socket_base+0x803);
-	udelay(100000);
-#if 0
-	printf("ExCA Id %02x, Card Status %02x, Power config %02x, Interrupt Config %02x, bridge control %04x %d\n",
-	       readb(socket_base+0x800), readb(socket_base+0x801),
-	       readb(socket_base+0x802), readb(socket_base+0x803), brg_ctrl, is_82365sl);
-#endif
-
-	return ((readb(socket_base+0x801)&0x6c)==0x6c)?0:1;
-}
-
-
-static int hardware_disable(int slot)
-{
-	voltage_set(slot, 0, 0);
-	return 0;
-}
-
-static void print_funcid(int func)
-{
-	puts(indent);
-	switch (func) {
-	case CISTPL_FUNCID_MULTI:
-		puts(" Multi-Function");
-		break;
-	case CISTPL_FUNCID_MEMORY:
-		puts(" Memory");
-		break;
-	case CISTPL_FUNCID_SERIAL:
-		puts(" Serial Port");
-		break;
-	case CISTPL_FUNCID_PARALLEL:
-		puts(" Parallel Port");
-		break;
-	case CISTPL_FUNCID_FIXED:
-		puts(" Fixed Disk");
-		break;
-	case CISTPL_FUNCID_VIDEO:
-		puts(" Video Adapter");
-		break;
-	case CISTPL_FUNCID_NETWORK:
-		puts(" Network Adapter");
-		break;
-	case CISTPL_FUNCID_AIMS:
-		puts(" AIMS Card");
-		break;
-	case CISTPL_FUNCID_SCSI:
-		puts(" SCSI Adapter");
-		break;
-	default:
-		puts(" Unknown");
-		break;
-	}
-	puts(" Card\n");
-}
-
-/* ------------------------------------------------------------------------- */
-
-static void print_fixed(volatile char *p)
-{
-	if (p == NULL)
-		return;
-
-	puts(indent);
-
-	switch (*p) {
-	case CISTPL_FUNCE_IDE_IFACE:
-		{   uchar iface = *(p+2);
-
-			puts ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown");
-			puts (" interface ");
-			break;
-		}
-	case CISTPL_FUNCE_IDE_MASTER:
-	case CISTPL_FUNCE_IDE_SLAVE:
-		{
-			uchar f1 = *(p+2);
-			uchar f2 = *(p+4);
-
-			puts((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]");
-
-			if (f1 & CISTPL_IDE_UNIQUE) {
-				puts(" [unique]");
-			}
-
-			puts((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]");
-
-			if (f2 & CISTPL_IDE_HAS_SLEEP) {
-				puts(" [sleep]");
-			}
-
-			if (f2 & CISTPL_IDE_HAS_STANDBY) {
-				puts(" [standby]");
-			}
-
-			if (f2 & CISTPL_IDE_HAS_IDLE) {
-				puts(" [idle]");
-			}
-
-			if (f2 & CISTPL_IDE_LOW_POWER) {
-				puts(" [low power]");
-			}
-
-			if (f2 & CISTPL_IDE_REG_INHIBIT) {
-				puts(" [reg inhibit]");
-			}
-
-			if (f2 & CISTPL_IDE_HAS_INDEX) {
-				puts(" [index]");
-			}
-
-			if (f2 & CISTPL_IDE_IOIS16) {
-				puts(" [IOis16]");
-			}
-
-			break;
-		}
-	}
-	putc('\n');
-}
-
-/* ------------------------------------------------------------------------- */
-
-#define MAX_IDENT_CHARS		64
-#define	MAX_IDENT_FIELDS	4
-
-static char *known_cards[] = {
-	"ARGOSY PnPIDE D5",
-	NULL
-};
-
-static int identify(volatile char *p)
-{
-	char id_str[MAX_IDENT_CHARS];
-	char data;
-	char *t;
-	char **card;
-	int i, done;
-
-	if (p == NULL)
-		return (0);	/* Don't know */
-
-	t = id_str;
-	done =0;
-
-	for (i=0; i<=4 && !done; ++i, p+=2) {
-		while ((data = *p) != '\0') {
-			if (data == 0xFF) {
-				done = 1;
-				break;
-			}
-			*t++ = data;
-			if (t == &id_str[MAX_IDENT_CHARS-1]) {
-				done = 1;
-				break;
-			}
-			p += 2;
-		}
-		if (!done)
-			*t++ = ' ';
-	}
-	*t = '\0';
-	while (--t > id_str) {
-		if (*t == ' ') {
-			*t = '\0';
-		} else {
-			break;
-		}
-	}
-	puts(id_str);
-	putc('\n');
-
-	for (card=known_cards; *card; ++card) {
-		debug ("## Compare against \"%s\"\n", *card);
-		if (strcmp(*card, id_str) == 0) {	/* found! */
-			debug ("## CARD FOUND ##\n");
-			return 1;
-		}
-	}
-
-	return 0;	/* don't know */
-}
-
-#endif /* CONFIG_CMD_PCMCIA */