networkd.conf systemd networkd.conf 5 networkd.conf networkd.conf.d Global Network configuration files /etc/systemd/networkd.conf /etc/systemd/networkd.conf.d/*.conf /usr/lib/systemd/networkd.conf.d/*.conf Description These configuration files control global network parameters. Currently the DHCP Unique Identifier (DUID). [Network] Section Options The following options are available in the [Network] section: SpeedMeter= Takes a boolean. If set to yes, then systemd-networkd measures the traffic of each interface, and networkctl status INTERFACE shows the measured speed. Defaults to no. SpeedMeterIntervalSec= Specifies the time interval to calculate the traffic speed of each interface. If SpeedMeter=no, the value is ignored. Defaults to 10sec. ManageForeignRoutes= A boolean. When true, systemd-networkd will store any routes configured by other tools in its memory. When false, systemd-networkd will not manage the foreign routes, thus they are kept even if KeepConfiguration= is false. Defaults to yes. RouteTable= Defines the route table name. Takes a whitespace-separated list of the pairs of route table name and number. The route table name and number in each pair are separated with a colon, i.e., name:number. The route table name must not be default, main, or local, as these route table names are predefined with route table number 253, 254, and 255, respectively. The route table number must be an integer in the range 1…4294967295. This setting can be specified multiple times. If an empty string is specified, then the list specified earlier are cleared. Defaults to unset. [DHCP] Section Options This section configures the DHCP Unique Identifier (DUID) value used by DHCP protocol. DHCPv6 client protocol sends the DHCP Unique Identifier and the interface Identity Association Identifier (IAID) to a DHCP server when acquiring a dynamic IPv6 address. DHCPv4 client protocol sends IAID and DUID to the DHCP server when acquiring a dynamic IPv4 address if . IAID and DUID allows a DHCP server to uniquely identify the machine and the interface requesting a DHCP IP. To configure IAID and ClientIdentifier, see systemd.network5. The following options are understood: DUIDType= Specifies how the DUID should be generated. See RFC 3315 for a description of all the options. The following values are understood: If DUIDType=vendor, then the DUID value will be generated using 43793 as the vendor identifier (systemd) and hashed contents of machine-id5. This is the default if DUIDType= is not specified. If DUIDType=uuid, and DUIDRawData= is not set, then the product UUID is used as a DUID value. If a system does not have valid product UUID, then an application-specific machine-id5 is used as a DUID value. About the application-specific machine ID, see sd_id128_get_machine_app_specific3. If link-layer-time or link-layer is specified, then the MAC address of the interface is used as a DUID value. The value link-layer-time can take additional time value after a colon, e.g. link-layer-time:2018-01-23 12:34:56 UTC. The default time value is 2000-01-01 00:00:00 UTC. In all cases, DUIDRawData= can be used to override the actual DUID value that is used. DUIDRawData= Specifies the DHCP DUID value as a single newline-terminated, hexadecimal string, with each byte separated by :. The DUID that is sent is composed of the DUID type specified by DUIDType= and the value configured here. The DUID value specified here overrides the DUID that systemd-networkd.service8 generates from the machine ID. To configure DUID per-network, see systemd.network5. The configured DHCP DUID should conform to the specification in RFC 3315, RFC 6355. To configure IAID, see systemd.network5 . A <option>DUIDType=vendor</option> with a custom value DUIDType=vendor DUIDRawData=00:00:ab:11:f9:2a:c2:77:29:f9:5c:00 This specifies a 14 byte DUID, with the type DUID-EN (00:02), enterprise number 43793 (00:00:ab:11), and identifier value f9:2a:c2:77:29:f9:5c:00. See Also systemd1, systemd.network5, systemd-networkd.service8, machine-id5, sd_id128_get_machine_app_specific3