#define PXENV_UNDI_SHUTDOWN 0x0005 #define PXENV_UNDI_GET_NIC_TYPE 0x0012 #define PXENV_STOP_UNDI 0x0015 #define PXENV_UNLOAD_STACK 0x0070 .text .arch i386 .org 0 .section ".prefix", "ax", @progbits .section ".prefix.data", "aw", @progbits .code16 #include /***************************************************************************** * Entry point: set operating context, print welcome message ***************************************************************************** */ .section ".prefix" /* Set up our non-stack segment registers */ jmp $0x7c0, $1f 1: pushfl /* %ax here is the default return type... */ movw $5, %ax /* Keep PXE+UNDI */ pushal pushw %ds pushw %es pushw %fs pushw %gs movw %cs, %ax movw %ax, %ds movw $0x40, %ax /* BIOS data segment access */ movw %ax, %fs pushw %fs:0x13 /* Record PXENV+ and !PXE nominal addresses */ movw %es, pxenv_segment movw %bx, pxenv_offset movw %sp, %bp movw %ss, return_stack_segment movl %esp, return_stack_offset movl 50(%bp), %eax movl %eax, ppxe_segoff /* !PXE address */ /* Set up stack just below 0x7c00 */ xorw %ax, %ax movw %ax, %ss movw $0x7c00, %sp /* Clear direction flag, for the sake of sanity */ cld /* Print welcome message */ movw $10f, %si xorw %di, %di call print_message .section ".prefix.data" 10: .asciz "PXE->EB:" .previous /***************************************************************************** * Verify PXENV+ structure and record parameters of interest ***************************************************************************** */ detect_pxenv: /* Signature check */ les pxenv_segoff, %bx cmpl $0x4e455850, %es:(%bx) /* 'PXEN' signature */ jne no_pxenv cmpw $0x2b56, %es:4(%bx) /* 'V+' signature */ jne no_pxenv /* Record entry point and UNDI segments */ pushl %es:0x0a(%bx) /* Entry point */ popl entry_segoff pushw %es:0x24(%bx) /* UNDI code segment */ pushw %es:0x26(%bx) /* UNDI code size */ popl undi_code_segoff pushw %es:0x20(%bx) /* UNDI data segment */ pushw %es:0x22(%bx) /* UNDI data size */ popl undi_data_segoff /* Print "PXENV+ at
" */ movw $10f, %si call print_message call print_segoff movb $',', %al call print_character jmp 99f .section ".prefix.data" 10: .asciz " PXENV+ at " .previous no_pxenv: xorl %eax, %eax movl %eax, pxenv_segoff 99: /***************************************************************************** * Verify !PXE structure and record parameters of interest ***************************************************************************** */ detect_ppxe: /* Signature check */ les ppxe_segoff, %bx cmpl $0x45585021, %es:(%bx) /* '!PXE' signature */ jne no_ppxe /* Record structure address, entry point, and UNDI segments */ pushw %es popw ppxe_segment movw %bx, ppxe_offset pushl %es:0x10(%bx) /* Entry point */ popl entry_segoff pushw %es:0x30(%bx) /* UNDI code segment */ pushw %es:0x36(%bx) /* UNDI code size */ popl undi_code_segoff pushw %es:0x28(%bx) /* UNDI data segment */ pushw %es:0x2e(%bx) /* UNDI data size */ popl undi_data_segoff /* Print "!PXE at
" */ movw $10f, %si call print_message call print_segoff movb $',', %al call print_character jmp 99f .section ".prefix.data" 10: .asciz " !PXE at " .previous no_ppxe: xorl %eax, %eax movl %eax, ppxe_segoff 99: /***************************************************************************** * Sanity check: we must have an entry point ***************************************************************************** */ check_have_stack: /* Check for entry point */ movl entry_segoff, %eax testl %eax, %eax jnz 99f /* No entry point: print message and skip everything else */ movw $10f, %si call print_message jmp finished .section ".prefix.data" 10: .asciz " No PXE stack found!\n" .previous 99: /***************************************************************************** * Calculate base memory usage by UNDI ***************************************************************************** */ find_undi_basemem_usage: movw undi_code_segment, %ax movw undi_code_size, %bx movw undi_data_segment, %cx movw undi_data_size, %dx cmpw %ax, %cx ja 1f xchgw %ax, %cx xchgw %bx, %dx 1: /* %ax:%bx now describes the lower region, %cx:%dx the higher */ shrw $6, %ax /* Round down to nearest kB */ movw %ax, undi_fbms_start addw $0x0f, %dx /* Round up to next segment */ shrw $4, %dx addw %dx, %cx addw $((1024 / 16) - 1), %cx /* Round up to next kB */ shrw $6, %cx movw %cx, undi_fbms_end /***************************************************************************** * Print information about detected PXE stack ***************************************************************************** */ print_structure_information: /* Print entry point */ movw $10f, %si call print_message les entry_segoff, %bx call print_segoff .section ".prefix.data" 10: .asciz " entry point at " .previous /* Print UNDI code segment */ movw $10f, %si call print_message les undi_code_segoff, %bx call print_segoff .section ".prefix.data" 10: .asciz "\n UNDI code segment " .previous /* Print UNDI data segment */ movw $10f, %si call print_message les undi_data_segoff, %bx call print_segoff .section ".prefix.data" 10: .asciz ", data segment " .previous /* Print UNDI memory usage */ movw $10f, %si call print_message movw undi_fbms_start, %ax call print_word movb $'-', %al call print_character movw undi_fbms_end, %ax call print_word movw $20f, %si call print_message .section ".prefix.data" 10: .asciz " (" 20: .asciz "kB)\n" .previous /***************************************************************************** * Determine physical device ***************************************************************************** */ get_physical_device: /* Issue PXENV_UNDI_GET_NIC_TYPE */ movw $PXENV_UNDI_GET_NIC_TYPE, %bx call pxe_call jnc 1f call print_pxe_error jmp no_physical_device 1: /* Determine physical device type */ movb ( pxe_parameter_structure + 0x02 ), %al cmpb $2, %al je pci_physical_device jmp no_physical_device pci_physical_device: /* Record PCI bus:dev.fn and vendor/device IDs */ movl ( pxe_parameter_structure + 0x03 ), %eax movl %eax, pci_vendor movw ( pxe_parameter_structure + 0x0b ), %ax movw %ax, pci_busdevfn movw $10f, %si call print_message call print_pci_busdevfn movb $0x0a, %al call print_character jmp 99f .section ".prefix.data" 10: .asciz " UNDI device is PCI " .previous no_physical_device: /* No device found, or device type not understood */ movw $10f, %si call print_message .section ".prefix.data" 10: .asciz " Unable to determine UNDI physical device\n" .previous 99: /***************************************************************************** * Leave NIC in a safe state ***************************************************************************** */ #ifndef PXELOADER_KEEP_UNDI shutdown_nic: /* Issue PXENV_UNDI_SHUTDOWN */ movw $PXENV_UNDI_SHUTDOWN, %bx call pxe_call jnc 1f call print_pxe_error 1: /***************************************************************************** * Unload PXE base code ***************************************************************************** */ unload_base_code: /* Issue PXENV_UNLOAD_STACK */ movw $PXENV_UNLOAD_STACK, %bx call pxe_call jnc 1f call print_pxe_error jmp 99f 1: /* Free base memory used by PXE base code */ movw undi_fbms_start, %ax movw %fs:(0x13), %bx call free_basemem 99: /***************************************************************************** * Unload UNDI driver ***************************************************************************** */ unload_undi: /* Issue PXENV_STOP_UNDI */ movw $PXENV_STOP_UNDI, %bx call pxe_call jnc 1f call print_pxe_error jmp 99f 1: /* Free base memory used by UNDI */ movw undi_fbms_end, %ax movw undi_fbms_start, %bx call free_basemem /* Clear UNDI_FL_STARTED */ andw $~UNDI_FL_STARTED, flags 99: /***************************************************************************** * Print remaining free base memory ***************************************************************************** */ print_free_basemem: movw $10f, %si call print_message movw %fs:(0x13), %ax call print_word movw $20f, %si call print_message .section ".prefix.data" 10: .asciz " " 20: .asciz "kB free base memory after PXE unload\n" .previous #endif /* PXELOADER_KEEP_UNDI */ /***************************************************************************** * Exit point ***************************************************************************** */ finished: jmp run_etherboot /***************************************************************************** * Subroutine: print segment:offset address * * Parameters: * %es:%bx : segment:offset address to print * %ds:di : output buffer (or %di=0 to print to console) * Returns: * %ds:di : next character in output buffer (if applicable) ***************************************************************************** */ print_segoff: /* Preserve registers */ pushw %ax /* Print ":offset" */ movw %es, %ax call print_hex_word movb $':', %al call print_character movw %bx, %ax call print_hex_word /* Restore registers and return */ popw %ax ret /***************************************************************************** * Subroutine: print decimal word * * Parameters: * %ax : word to print * %ds:di : output buffer (or %di=0 to print to console) * Returns: * %ds:di : next character in output buffer (if applicable) ***************************************************************************** */ print_word: /* Preserve registers */ pushw %ax pushw %bx pushw %cx pushw %dx /* Build up digit sequence on stack */ movw $10, %bx xorw %cx, %cx 1: xorw %dx, %dx divw %bx, %ax pushw %dx incw %cx testw %ax, %ax jnz 1b /* Print digit sequence */ 1: popw %ax call print_hex_nibble loop 1b /* Restore registers and return */ popw %dx popw %cx popw %bx popw %ax ret /***************************************************************************** * Subroutine: zero 1kB block of base memory * * Parameters: * %bx : block to zero (in kB) * Returns: * Nothing ***************************************************************************** */ zero_kb: /* Preserve registers */ pushw %ax pushw %cx pushw %di pushw %es /* Zero block */ movw %bx, %ax shlw $6, %ax movw %ax, %es movw $0x400, %cx xorw %di, %di xorw %ax, %ax rep stosb /* Restore registers and return */ popw %es popw %di popw %cx popw %ax ret /***************************************************************************** * Subroutine: free and zero base memory * * Parameters: * %ax : Desired new free base memory counter (in kB) * %bx : Expected current free base memory counter (in kB) * %fs : BIOS data segment (0x40) * Returns: * None * * The base memory from %bx kB to %ax kB is unconditionally zeroed. * It will be freed if and only if the expected current free base * memory counter (%bx) matches the actual current free base memory * counter in 0x40:0x13; if this does not match then the memory will * be leaked. ***************************************************************************** */ free_basemem: /* Zero base memory */ pushw %bx 1: cmpw %bx, %ax je 2f call zero_kb incw %bx jmp 1b 2: popw %bx /* Free base memory */ cmpw %fs:(0x13), %bx /* Update FBMS only if "old" value */ jne 1f /* is correct */ 1: movw %ax, %fs:(0x13) ret /***************************************************************************** * Subroutine: make a PXE API call. Works with either !PXE or PXENV+ API. * * Parameters: * %bx : PXE API call number * %ds:pxe_parameter_structure : Parameters for PXE API call * Returns: * %ax : PXE status code (not exit code) * CF set if %ax is non-zero ***************************************************************************** */ pxe_call: /* Preserve registers */ pushw %di pushw %es /* Set up registers for PXENV+ API. %bx already set up */ pushw %ds popw %es movw $pxe_parameter_structure, %di /* Set up stack for !PXE API */ pushw %es pushw %di pushw %bx /* Make the API call */ lcall *entry_segoff /* Reset the stack */ addw $6, %sp movw pxe_parameter_structure, %ax clc testw %ax, %ax jz 1f stc 1: /* Restore registers and return */ popw %es popw %di ret /***************************************************************************** * Subroutine: print PXE API call error message * * Parameters: * %ax : PXE status code * %bx : PXE API call number * Returns: * Nothing ***************************************************************************** */ print_pxe_error: pushw %si movw $10f, %si call print_message xchgw %ax, %bx call print_hex_word movw $20f, %si call print_message xchgw %ax, %bx call print_hex_word movw $30f, %si call print_message popw %si ret .section ".prefix.data" 10: .asciz " UNDI API call " 20: .asciz " failed: status code " 30: .asciz "\n" .previous /***************************************************************************** * PXE data structures ***************************************************************************** */ pxe_parameter_structure: .fill 20 undi_code_segoff: undi_code_size: .word 0 undi_code_segment: .word 0 undi_data_segoff: undi_data_size: .word 0 undi_data_segment: .word 0 /* The following fields are part of a struct undi_device */ undi_device: pxenv_segoff: pxenv_offset: .word 0 pxenv_segment: .word 0 ppxe_segoff: ppxe_offset: .word 0 ppxe_segment: .word 0 entry_segoff: entry_offset: .word 0 entry_segment: .word 0 return_stack_segoff: return_stack_offset: .long 0 return_stack_segment: .word 0 return_type: .word 0 /* Default: unload PXE and boot next */ undi_fbms_start: .word 0 undi_fbms_end: .word 0 pci_busdevfn: .word UNDI_NO_PCI_BUSDEVFN isapnp_csn: .word UNDI_NO_ISAPNP_CSN isapnp_read_port: .word UNDI_NO_ISAPNP_READ_PORT pci_vendor: .word 0 pci_device: .word 0 flags: .word UNDI_FL_STARTED .equ undi_device_size, ( . - undi_device ) /***************************************************************************** * Run Etherboot main code ***************************************************************************** */ run_etherboot: /* Install Etherboot */ call install /* Set up real-mode stack */ movw %bx, %ss movw $_estack16, %sp #ifdef PXELOADER_KEEP_UNDI /* Copy our undi_device structure to the preloaded_undi variable */ movw %bx, %es movw $preloaded_undi, %di movw $undi_device, %si movw $undi_device_size, %cx rep movsb #endif /* Jump to .text16 segment with %ds pointing to .data16 */ movw %bx, %ds pushw %ax pushw $1f lret .section ".text16", "ax", @progbits 1: /* Run main program */ pushl $main pushw %cs call prot_call popl %eax /* discard */ #ifdef PXELOADER_KEEP_UNDI /* Boot next device */ movw $0x40, %ax movw %ax, %fs movw $preloaded_undi,%bx cli movw %ss:return_type-undi_device(%bx),%ax lssl %ss:return_stack_segoff-undi_device(%bx), %esp movw %sp,%bp movw %ax,38(%bp) /* Overwrite return AX value */ popw %fs:0x13 /* 0 */ popw %gs /* 2 */ popw %fs /* 4 */ popw %es /* 6 */ popw %ds /* 8 */ popal /* 10, 14, 18, 22, 26, 30, 34, 38 */ popfl /* 42 */ lret /* 46 */ #else int $0x18 #endif .previous