$Id$ COMBOOT and COM32 files SYSLINUX supports simple standalone programs, using a file format similar to DOS ".com" files. A 32-bit version, called COM32, is also provided. A simple API provides access to a limited set of filesystem and console functions. ++++ COMBOOT file format ++++ A COMBOOT file is a raw binary file containing 16-bit code. It should be linked to run at offset 0x100, and contain no absolute segment references. It is run in 16-bit real mode. A COMBOOT image can be written to be compatible with MS-DOS. Such a file will usually have extension ".com". A COMBOOT file which is not compatible with MS-DOS will usually have extension ".cbt". Before running the program, SYSLINUX sets up the following fields in the Program Segment Prefix (PSP), a structure at offset 0 in the program segment: Offset Size Meaning 0 word Contains an INT 20h instruction 2 word Contains the paragraph (16-byte "segment" address) at the end of memory available to the program. 128 byte Length of the command line arguments, including the leading space but not including the final CR character. 129 127b Command line arguments, starting with a space and ending with a CR character (ASCII 13). The program is allowed to use memory between the PSP paragraph (which all the CS, DS, ES and SS registers point to at program start) and the paragraph value given at offset 2. On startup, SP is set up to point to the end of the 64K segment, at 0xfffe. Under DOS it is possible for SP to contain a smaller value if memory is very tight; this is never the case under SYSLINUX. The program should make no assumptions about what segment address it will be loaded at; instead it should look at the segment registers on program startup. Both DOS and SYSLINUX will guarantee CS == DS == ES == SS on program start; the program should not assume anything about the values of FS or GS. To exit, a program can either execute a near RET (which will jump to offset 0 which contains an INT 20h instruction, terminating the program), or execute INT 20h or INT 21h AH=00h or INT 21h AH=4Ch. If compatiblity with SYSLINUX 1.xx is desired, use INT 20h. ++++ COM32 file format ++++ A COM32 file is a raw binary file containing 32-bit code. It should be linked to run at address 0x101000, and should not contain any segment references. It will be run in flat-memory 32-bit protected mode. Under SYSLINUX, it will be run in CPL 0, however, since it may be possible to create a COM32 execution engine that would run under something like Linux DOSEMU, it is recommended that the code does not assume CPL 0 unless absolutely necessary. It is highly recommended that every COM32 program begins with the byte sequence B8 FF 4C CD 21 (mov eax,21cd4cffh) as a magic number. A COM32 file should have extension ".c32". On startup, CS will be set up as a flat 32-bit code segment, and DS == ES == SS will be set up as the equivalent flat 32-bit data segment. FS and GS are reserved for future use and are currently initialized to zero. A COM32 image should not assume any particular values of segment selectors. ESP is set up at the end of available memory and also serves as notification to the program how much memory is available. The following arguments are passed to the program on the stack: Address Size Meaning [ESP+4] dword Number of additional arguments (currently 4) [ESP+8] dword Pointer to the command line arguments (null-terminated string) [ESP+12] dword Pointer to system call helper function [ESP+16] dword Pointer to low memory bounce buffer [ESP+20] dword Size of low memory bounce buffer This corresponds to the following C prototype, available in the file com32/include/com32.h: /* The standard prototype for _start() */ int _start(unsigned int __nargs, char *__cmdline, void (*__syscall)(uint8_t, com32sys_t *, com32sys_t *), void *__bounce_ptr, unsigned int __bounce_len); The system call helper function can be used to issue BIOS or SYSLINUX API calls, and takes the interrupt number as first argument. The second argument is a pointer to the input register definition, an instance of the following structure (also available in com32.h): typedef union { uint32_t l; uint16_t w[2]; uint8_t b[4]; } reg32_t; typedef struct { uint16_t gs; /* Offset 0 */ uint16_t fs; /* Offset 2 */ uint16_t es; /* Offset 4 */ uint16_t ds; /* Offset 6 */ reg32_t edi; /* Offset 8 */ reg32_t esi; /* Offset 12 */ reg32_t ebp; /* Offset 16 */ reg32_t _unused; /* Offset 20 */ reg32_t ebx; /* Offset 24 */ reg32_t edx; /* Offset 28 */ reg32_t ecx; /* Offset 32 */ reg32_t eax; /* Offset 36 */ reg32_t eflags; /* Offset 40 */ } com32sys_t; The third argument is a pointer to the output register definition, an instance of the same structure. The third argument can also be zero (NULL). Since BIOS or SYSLINUX API calls can generally only manipulate data below address 0x100000, a "bounce buffer" in low memory, at least 64K in size, is available, to copy data in and out. ++++ SYSLINUX API CALLS +++ SYSLINUX provides the following API calls. SYSLINUX 1.xx only supported INT 20h - terminate program. ++++ DOS-COMPATIBLE API CALLS ++++ INT 20h Terminate program INT 21h AH=00h Terminate program INT 21h AH=4Ch Terminate program All of these terminate the program. INT 21h AH=01h Get Key with Echo Reads a key from the console input, with echo to the console output. The read character is returned in AL. Extended characters received from the keyboard are returned as NUL (00h) + the extended character code. INT 21h AH=02h Write Character Writes a character in DL to the console (video and serial) output. INT 21h AH=04h Write Character to Serial Port Writes a character in DL to the serial console output (if enabled.) If no serial port is configured, this routine does nothing. INT 21h AH=08h Get Key without Echo Reads a key fron the console input, without echoing it to the console output. The read character is returned in AL. INT 21h AH=0Bh Check Keyboard Returns AL=FFh if there is a keystroke waiting (which can then be read with INT 21h, AH=01h or AH=08h), otherwise AL=00h. INT 21h AH=30h Check DOS Version This function returns AX=BX=CX=DX=0, corresponding to a hypothetical "DOS 0.0", but the high parts of EAX-EBX-ECX-EDX spell "SYSLINUX": EAX=53590000h EBX=534C0000h ECX=494E0000h EDX=55580000h This function can thus be used to distinguish running on SYSLINUX from running on DOS. ++++ SYSLINUX-SPECIFIC API CALLS ++++ SYSLINUX-specific API calls are executed using INT 22h, with a function number in AX. INT 22h is used by DOS for internal purposes; do not execute INT 22h under DOS. DOS-compatible function INT 21h, AH=30h can be used to detect if the SYSLINUX API calls are available. Any register not specifically listed as modified is preserved; however, future versions of SYSLINUX may add additional output registers to existing calls. All calls return CF=0 on success, CF=1 on failure. The noted outputs apply if CF=0 only unless otherwise noted. All calls clobber the arithmetric flags (CF, PF, AF, ZF, SF and OF) but leave all other flags unchanged unless otherwise noted. AX=0001h Get Version Input: AX 0001h Output: AX number of INT 22h API functions available CH SYSLINUX major version number CL SYSLINUX minor version number DL SYSLINUX derivative ID (e.g. 32h = PXELINUX) ES:SI SYSLINUX version string ES:DI SYSLINUX copyright string This API call returns the SYSLINUX version and API information. AX=0002h Write String Input: AX 0002h ES:BX null-terminated string Output: None Writes a null-terminated string on the console. AX=0003h Run command Input: AX 0003h ES:BX null-terminated command string Output: None This API call terminates the program and executes the command string as if the user had entered it at the SYSLINUX command line. This API call does not return. AX=0004h Run default command Input: AX 0004h Output: None This API call terminates the program and executes the default command string as if the user had pressed Enter alone on the SYSLINUX command line. This API call does not return. AX=0005h Force text mode Input: AX 0005h Output: None If the screen was in graphics mode (due to displaying a splash screen using the command in a message file, or similar), return to text mode. AX=0006h Open file Input: AX 0006h ES:SI null-terminated filename Output: SI file handle EAX length of file in bytes CX file block size Open a file for reading. The exact syntax of the filenames allowed depends on the particular SYSLINUX derivative. The SYSLINUX file system is block-oriented. The size of a block will always be a power of two and no greater than 16K. Note: SYSLINUX considers a zero-length file to be nonexistent. AX=0007h Read file Input: AX 0007h SI file handle ES:BX buffer CX number of blocks to read Output: SI file handle, or 0 if EOF was reached Read blocks from a file. Note that the file handle that is returned in SI may not be the same value that was passed in. If end of file was reached (SI=0), the file was automatically closed. The address of the buffer (ES:BX) should be at least 512-byte aligned. SYSLINUX guarantees at least this alignment for the COMBOOT load segment or the COM32 bounce buffer. Keep in mind that a "file" may be a TFTP connection, and that leaving a file open for an extended period of time may result in a timeout. WARNING: Calling this function with an invalid file handle will probably crash the system. AX=0008h Close file Input: AX 0008h SI file handle Output: None Close a file before reaching the end of file. WARNING: Calling this function with an invalid file handle will probably crash the system. AX=0009h Call PXE Stack [PXELINUX ONLY] Input: AX 0009h BX PXE function number ES:DI PXE data buffer Output: AX PXE return status code Invoke an arbitrary PXE stack function. On SYSLINUX/ISOLINUX, this function returns with an error (CF=1) and no action is taken. On PXELINUX, this function always returns with CF=0 indicating that the PXE stack was successfully invoked; check the status code in AX and in the first word of the data buffer to determine if the PXE call succeeded or not. AX=000Ah Get Derivative-Specific Information [SYSLINUX] Input: AX 000Ah Output: AL 31h (SYSLINUX) DL drive number ES:BX pointer to partition table entry (if DL >= 80h) [PXELINUX] Input: AX 000Ah Output: AL 32h (PXELINUX) DX PXE API version detected (DH=major, DL=minor) ES:BX pointer to PXENV+ or !PXE structure FS:SI pointer to original stack with invocation record Note: DX notes the API version detected by PXELINUX, which may be more conservative than the actual version available. For exact information examine the API version entry in the PXENV+ structure, or the API version entries in the ROMID structures pointed from the !PXE structure. PXELINUX will use, and provide, the !PXE structure over the PXENV+ structure. Examine the structure signature to determine which particular structure was provided. The FS:SI pointer points to the top of the original stack provided by the PXE stack, with the following values pushed at the time PXELINUX is started: [fs:si+0] GS <- top of stack [fs:si+2] FS [fs:si+4] ES [fs:si+6] DS [fs:si+8] EDI [fs:si+12] ESI [fs:si+16] EBP [fs:si+20] - [fs:si+24] EBX [fs:si+28] EDX [fs:si+32] ECX [fs:si+36] EAX [fs:si+40] EFLAGS [fs:si+44] PXE return IP <- t.o.s. when PXELINUX invoked [fs:si+46] PXE return CS [ISOLINUX] Input: AX 000Ah Output: AL 33h (ISOLINUX) DL drive number ES:BX pointer to El Torito spec packet Note: Some very broken El Torito implementations do not provide the spec packet information. If so, ES:BX may point to all zeroes or to garbage. Call INT 13h, AX=4B01h to obtain the spec packet directly from the BIOS if necessary. This call gives information specific to a particular SYSLINUX derivative. The value returned in AL is the same as is returned in DL by INT 22h AX=0001h. AX=000Bh Get Serial Console Configuration Input: AX 000Bh Output: DX Serial port I/O base (e.g. 3F8h = COM1...) CX Baud rate divisor (1 = 115200 bps, 2 = 57600 bps...) BX Flow control configuration bits (see syslinux.doc) If no serial port is configured, DX will be set to 0 and the other registers are undefined. AX=000Ch Perform final cleanup Input: AX 000Ch DX derivative-specific flags (0000h = clean up all) Output: None This routine performs any "final cleanup" the boot loader would normally perform before loading a kernel, such as unloading the PXE stack in the case of PXELINUX. AFTER INVOKING THIS CALL, NO OTHER API CALLS MAY BE INVOKED, NOR MAY THE PROGRAM TERMINATE AND RETURN TO THE BOOT LOADER. This call basically tells the boot loader "get out of the way, I'll handle it from here." For COM32 images, the boot loader will continue to provide interrupt and BIOS call thunking services as long its memory areas (0x1000-0xffff, 0x100000-0x100fff) are not overwritten. MAKE SURE TO DISABLE INTERRUPTS, AND INSTALL NEW GDT AND IDTS BEFORE OVERWRITING THESE MEMORY AREAS. The permissible values for DX are as follows: SYSLINUX: 0000h Normal cleanup PXELINUX: 0000h Normal cleanup 0003h Keep UNDI and PXE stacks loaded ISOLINUX: 0000h Normal cleanup All other values are undefined, and may have different meanings in future versions of SYSLINUX.