/* * kempld_wdt.h - Kontron PLD watchdog driver definitions * * Copyright (c) 2010 Kontron Embedded Modules GmbH * Author: Michael Brunner * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License 2 as published * by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef _KEMPLD_WDT_H_ #define _KEMPLD_WDT_H_ #include #define KEMPLD_IOPORT 0x0a80 #define KEMPLD_IODATA (KEMPLD_IOPORT+1) #define KEMPLD_MUTEX_KEY 0x80 /* watchdog register definitions */ #define KEMPLD_WDT_KICK 0x16 #define KEMPLD_WDT_REV 0x16 #define KEMPLD_WDT_REV_GET(x) (x & 0xf) #define KEMPLD_WDT_CFG 0x17 #define KEMPLD_WDT_CFG_STAGE_TIMEOUT_OCCURED(x) (1<>4) #define KEMPLD_WDT_STAGE_CFG_SET_PRESCALER(x) ((x & 0x30)<<4) #define KEMPLD_WDT_STAGE_TIMEOUT(x) (0x1b+x*4) #define KEMPLD_WDT_MAX_STAGES 3 #define KEMPLD_WDT_ACTION_NONE 0x0 #define KEMPLD_WDT_ACTION_RESET 0x1 #define KEMPLD_WDT_ACTION_NMI 0x2 #define KEMPLD_WDT_ACTION_SMI 0x3 #define KEMPLD_WDT_ACTION_SCI 0x4 #define KEMPLD_WDT_ACTION_DELAY 0x5 #define KEMPLD_WDT_PRESCALER_21BIT 0x0 #define KEMPLD_WDT_PRESCALER_17BIT 0x1 #define KEMPLD_WDT_PRESCALER_12BIT 0x2 const int kempld_prescaler_bits[] = { 21, 17, 12 }; struct kempld_watchdog_stage { int num; uint32_t timeout_mask; }; /** * struct kempld_device_data - Internal representation of the PLD device * @io_base: Pointer to the IO memory * @io_index: Pointer to the IO index register * @io_data: Pointer to the IO data register * @pld_clock: PLD clock frequency * @lock: PLD spin-lock * @lock_flags: PLD spin-lock flags * @have_mutex: Bool value that indicates if mutex is aquired * @last_index: Last written index value * @rscr: Kernel resource structure * @dev: Pointer to kernel device structure * @info: KEMPLD info structure */ struct kempld_device_data { uint16_t io_base; uint16_t io_index; uint16_t io_data; uint32_t pld_clock; /* spinlock_t lock; unsigned long lock_flags; */ int have_mutex; uint8_t last_index; /* struct resource rscr; struct device *dev; struct kempld_info info;*/ }; struct watchdog_info { uint32_t options; /* Options the card/driver supports */ uint32_t firmware_version; /* Firmware version of the card */ uint8_t identity[32]; /* Identity of the board */ }; struct kempld_watchdog_data { unsigned int revision; int timeout; int pretimeout; unsigned long is_open; unsigned long expect_close; int stages; struct kempld_watchdog_stage *timeout_stage; struct kempld_watchdog_stage *pretimeout_stage; struct kempld_device_data *pld; struct kempld_watchdog_stage *stage[KEMPLD_WDT_MAX_STAGES]; struct watchdog_info ident; }; #endif /* _KEMPLD_WDT_H_ */ #define KEMPLD_PRESCALER(x) (0xffffffff>>(32-kempld_prescaler_bits[x]))