/*
Unix SMB/CIFS implementation.
Copyright (C) Stefan Metzmacher 2009
** NOTE! The following LGPL license applies to the tsocket
** library. This does NOT imply that all of Samba is released
** under the LGPL
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 3 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, see .
*/
#ifndef _TSOCKET_H
#define _TSOCKET_H
#include
struct samba_sockaddr;
struct tsocket_address;
struct tdgram_context;
struct tstream_context;
struct iovec;
/**
* @mainpage
*
* The tsocket abstraction is an API ...
*/
/**
* @defgroup tsocket The tsocket API
*
* The tsocket abstraction is split into two different kinds of
* communication interfaces.
*
* There's the "tstream_context" interface with abstracts the communication
* through a bidirectional byte stream between two endpoints.
*
* And there's the "tdgram_context" interface with abstracts datagram based
* communication between any number of endpoints.
*
* Both interfaces share the "tsocket_address" abstraction for endpoint
* addresses.
*
* The whole library is based on the talloc(3) and 'tevent' libraries and
* provides "tevent_req" based "foo_send()"/"foo_recv()" functions pairs for
* all abstracted methods that need to be async.
*
* @section vsock Virtual Sockets
*
* The abstracted layout of tdgram_context and tstream_context allow
* implementations around virtual sockets for encrypted tunnels (like TLS,
* SASL or GSSAPI) or named pipes over smb.
*
* @section npa Named Pipe Auth (NPA) Sockets
*
* Samba has an implementation to abstract named pipes over smb (within the
* server side). See libcli/named_pipe_auth/npa_tstream.[ch] for the core code.
* The current callers are located in source4/ntvfs/ipc/vfs_ipc.c and
* source4/rpc_server/service_rpc.c for the users.
*/
/**
* @defgroup tsocket_address The tsocket_address abstraction
* @ingroup tsocket
*
* The tsocket_address represents an socket endpoint genericly.
* As it's like an abstract class it has no specific constructor.
* The specific constructors are descripted in later sections.
*
* @{
*/
/**
* @brief Get a string representation of the endpoint.
*
* This function creates a string representation of the endpoint for debugging.
* The output will look as followed:
* prefix:address:port
*
* e.g.
* ipv4:192.168.1.1:143
*
* Callers should not try to parse the string! The should use additional methods
* of the specific tsocket_address implemention to get more details.
*
* @param[in] addr The address to convert.
*
* @param[in] mem_ctx The talloc memory context to allocate the memory.
*
* @return The address as a string representation, NULL on error.
*
* @see tsocket_address_is_inet()
* @see tsocket_address_inet_addr_string()
* @see tsocket_address_inet_port()
*/
char *tsocket_address_string(const struct tsocket_address *addr,
TALLOC_CTX *mem_ctx);
#ifdef DOXYGEN
/**
* @brief This creates a copy of a tsocket_address.
*
* This is useful when before doing modifications to a socket via additional
* methods of the specific tsocket_address implementation.
*
* @param[in] addr The address to create the copy from.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @return A newly allocated copy of addr (tsocket_address *), NULL
* on error.
*/
struct tsocket_address *tsocket_address_copy(const struct tsocket_address *addr,
TALLOC_CTX *mem_ctx);
#else
struct tsocket_address *_tsocket_address_copy(const struct tsocket_address *addr,
TALLOC_CTX *mem_ctx,
const char *location);
#define tsocket_address_copy(addr, mem_ctx) \
_tsocket_address_copy(addr, mem_ctx, __location__)
#endif
/**
* @}
*/
/**
* @defgroup tdgram_context The tdgram_context abstraction
* @ingroup tsocket
*
* The tdgram_context is like an abstract class for datagram based sockets. The
* interface provides async 'tevent_req' based functions on top functionality
* is similar to the recvfrom(2)/sendto(2)/close(2) syscalls.
*
* @note You can always use talloc_free(tdgram) to cleanup the resources
* of the tdgram_context on a fatal error.
* @{
*/
/**
* @brief Ask for next available datagram on the abstracted tdgram_context.
*
* It returns a 'tevent_req' handle, where the caller can register
* a callback with tevent_req_set_callback(). The callback is triggered
* when a datagram is available or an error happened.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] ev The tevent_context to run on.
*
* @param[in] dgram The dgram context to work on.
*
* @return Returns a 'tevent_req' handle, where the caller can
* register a callback with tevent_req_set_callback().
* NULL on fatal error.
*
* @see tdgram_inet_udp_socket()
* @see tdgram_unix_socket()
*/
struct tevent_req *tdgram_recvfrom_send(TALLOC_CTX *mem_ctx,
struct tevent_context *ev,
struct tdgram_context *dgram);
/**
* @brief Receive the next available datagram on the abstracted tdgram_context.
*
* This function should be called by the callback when a datagram is available
* or an error happened.
*
* The caller can only have one outstanding tdgram_recvfrom_send() at a time
* otherwise the caller will get '*perrno = EBUSY'.
*
* @param[in] req The tevent request from tdgram_recvfrom_send().
*
* @param[out] perrno The error number, set if an error occurred.
*
* @param[in] mem_ctx The memory context to use.
*
* @param[out] buf This will hold the buffer of the datagram.
*
* @param[out] src The abstracted tsocket_address of the sender of the
* received datagram.
*
* @return The length of the datagram (0 is never returned!),
* -1 on error with perrno set to the actual errno.
*
* @see tdgram_recvfrom_send()
*/
ssize_t tdgram_recvfrom_recv(struct tevent_req *req,
int *perrno,
TALLOC_CTX *mem_ctx,
uint8_t **buf,
struct tsocket_address **src);
/**
* @brief Send a datagram to a destination endpoint.
*
* The function can be called to send a datagram (specified by a buf/len) to a
* destination endpoint (specified by dst). It's not allowed for len to be 0.
*
* It returns a 'tevent_req' handle, where the caller can register a callback
* with tevent_req_set_callback(). The callback is triggered when the specific
* implementation (assumes it) has delivered the datagram to the "wire".
*
* The callback is then supposed to get the result by calling
* tdgram_sendto_recv() on the 'tevent_req'.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] ev The tevent_context to run on.
*
* @param[in] dgram The dgram context to work on.
*
* @param[in] buf The buffer to send.
*
* @param[in] len The length of the buffer to send. It has to be bigger
* than 0.
*
* @param[in] dst The destination to send the datagram to in form of a
* tsocket_address.
*
* @return Returns a 'tevent_req' handle, where the caller can
* register a callback with tevent_req_set_callback().
* NULL on fatal error.
*
* @see tdgram_inet_udp_socket()
* @see tdgram_unix_socket()
* @see tdgram_sendto_recv()
*/
struct tevent_req *tdgram_sendto_send(TALLOC_CTX *mem_ctx,
struct tevent_context *ev,
struct tdgram_context *dgram,
const uint8_t *buf, size_t len,
const struct tsocket_address *dst);
/**
* @brief Receive the result of the sent datagram.
*
* The caller can only have one outstanding tdgram_sendto_send() at a time
* otherwise the caller will get '*perrno = EBUSY'.
*
* @param[in] req The tevent request from tdgram_sendto_send().
*
* @param[out] perrno The error number, set if an error occurred.
*
* @return The length of the datagram (0 is never returned!), -1 on
* error with perrno set to the actual errno.
*
* @see tdgram_sendto_send()
*/
ssize_t tdgram_sendto_recv(struct tevent_req *req,
int *perrno);
/**
* @brief Shutdown/close an abstracted socket.
*
* It returns a 'tevent_req' handle, where the caller can register a callback
* with tevent_req_set_callback(). The callback is triggered when the specific
* implementation (assumes it) has delivered the datagram to the "wire".
*
* The callback is then supposed to get the result by calling
* tdgram_sendto_recv() on the 'tevent_req'.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] ev The tevent_context to run on.
*
* @param[in] dgram The dgram context diconnect from.
*
* @return Returns a 'tevent_req' handle, where the caller can
* register a callback with tevent_req_set_callback().
* NULL on fatal error.
*
* @see tdgram_disconnect_recv()
*/
struct tevent_req *tdgram_disconnect_send(TALLOC_CTX *mem_ctx,
struct tevent_context *ev,
struct tdgram_context *dgram);
/**
* @brief Receive the result from a tdgram_disconnect_send() request.
*
* The caller should make sure there're no outstanding tdgram_recvfrom_send()
* and tdgram_sendto_send() calls otherwise the caller will get
* '*perrno = EBUSY'.
*
* @param[in] req The tevent request from tdgram_disconnect_send().
*
* @param[out] perrno The error number, set if an error occurred.
*
* @return The length of the datagram (0 is never returned!), -1 on
* error with perrno set to the actual errno.
*
* @see tdgram_disconnect_send()
*/
int tdgram_disconnect_recv(struct tevent_req *req,
int *perrno);
/**
* @}
*/
/**
* @defgroup tstream_context The tstream_context abstraction
* @ingroup tsocket
*
* The tstream_context is like an abstract class for stream based sockets. The
* interface provides async 'tevent_req' based functions on top functionality
* is similar to the readv(2)/writev(2)/close(2) syscalls.
*
* @note You can always use talloc_free(tstream) to cleanup the resources
* of the tstream_context on a fatal error.
*
* @{
*/
/**
* @brief Report the number of bytes received but not consumed yet.
*
* The tstream_pending_bytes() function reports how much bytes of the incoming
* stream have been received but not consumed yet.
*
* @param[in] stream The tstream_context to check for pending bytes.
*
* @return The number of bytes received, -1 on error with errno
* set.
*/
ssize_t tstream_pending_bytes(struct tstream_context *stream);
/**
* @brief Read a specific amount of bytes from a stream socket.
*
* The function can be called to read for a specific amount of bytes from the
* stream into given buffers. The caller has to preallocate the buffers.
*
* The caller might need to use tstream_pending_bytes() if the protocol doesn't
* have a fixed pdu header containing the pdu size.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] ev The tevent_context to run on.
*
* @param[in] stream The tstream context to work on.
*
* @param[out] vector A preallocated iovec to store the data to read.
*
* @param[in] count The number of buffers in the vector allocated.
*
* @return A 'tevent_req' handle, where the caller can register
* a callback with tevent_req_set_callback(). NULL on
* fatal error.
*
* @see tstream_unix_connect_send()
* @see tstream_inet_tcp_connect_send()
*/
struct tevent_req *tstream_readv_send(TALLOC_CTX *mem_ctx,
struct tevent_context *ev,
struct tstream_context *stream,
struct iovec *vector,
size_t count);
/**
* @brief Get the result of a tstream_readv_send().
*
* The caller can only have one outstanding tstream_readv_send()
* at a time otherwise the caller will get *perrno = EBUSY.
*
* @param[in] req The tevent request from tstream_readv_send().
*
* @param[out] perrno The error number, set if an error occurred.
*
* @return The length of the stream (0 is never returned!), -1 on
* error with perrno set to the actual errno.
*/
int tstream_readv_recv(struct tevent_req *req,
int *perrno);
/**
* @brief Write buffers from a vector into a stream socket.
*
* The function can be called to write buffers from a given vector
* to a stream socket.
*
* You have to ensure that the vector is not empty.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] ev The tevent_context to run on.
*
* @param[in] stream The tstream context to work on.
*
* @param[in] vector The iovec vector with data to write on a stream socket.
*
* @param[in] count The number of buffers in the vector to write.
*
* @return A 'tevent_req' handle, where the caller can register
* a callback with tevent_req_set_callback(). NULL on
* fatal error.
*/
struct tevent_req *tstream_writev_send(TALLOC_CTX *mem_ctx,
struct tevent_context *ev,
struct tstream_context *stream,
const struct iovec *vector,
size_t count);
/**
* @brief Get the result of a tstream_writev_send().
*
* The caller can only have one outstanding tstream_writev_send()
* at a time otherwise the caller will get *perrno = EBUSY.
*
* @param[in] req The tevent request from tstream_writev_send().
*
* @param[out] perrno The error number, set if an error occurred.
*
* @return The length of the stream (0 is never returned!), -1 on
* error with perrno set to the actual errno.
*/
int tstream_writev_recv(struct tevent_req *req,
int *perrno);
/**
* @brief Shutdown/close an abstracted socket.
*
* It returns a 'tevent_req' handle, where the caller can register a callback
* with tevent_req_set_callback(). The callback is triggered when the specific
* implementation (assumes it) has delivered the stream to the "wire".
*
* The callback is then supposed to get the result by calling
* tdgram_sendto_recv() on the 'tevent_req'.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] ev The tevent_context to run on.
*
* @param[in] stream The tstream context to work on.
*
* @return A 'tevent_req' handle, where the caller can register
* a callback with tevent_req_set_callback(). NULL on
* fatal error.
*/
struct tevent_req *tstream_disconnect_send(TALLOC_CTX *mem_ctx,
struct tevent_context *ev,
struct tstream_context *stream);
/**
* @brief Get the result of a tstream_disconnect_send().
*
* The caller can only have one outstanding tstream_writev_send()
* at a time otherwise the caller will get *perrno = EBUSY.
*
* @param[in] req The tevent request from tstream_disconnect_send().
*
* @param[out] perrno The error number, set if an error occurred.
*
* @return The length of the stream (0 is never returned!), -1 on
* error with perrno set to the actual errno.
*/
int tstream_disconnect_recv(struct tevent_req *req,
int *perrno);
/**
* @}
*/
/**
* @defgroup tsocket_bsd tsocket_bsd - inet, inet6 and unix
* @ingroup tsocket
*
* The main tsocket library comes with implementations for BSD style ipv4, ipv6
* and unix sockets.
*
* @{
*/
/**
* @brief Find out if the tsocket_address represents an ipv4 or ipv6 endpoint.
*
* @param[in] addr The tsocket_address pointer
*
* @param[in] fam The family can be can be "ipv4", "ipv6" or "ip". With
* "ip" is autodetects "ipv4" or "ipv6" based on the
* addr.
*
* @return true if addr represents an address of the given family,
* otherwise false.
*/
bool tsocket_address_is_inet(const struct tsocket_address *addr, const char *fam);
#ifdef DOXYGEN
/**
* @brief Create a tsocket_address for ipv4 and ipv6 endpoint addresses.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] fam The family can be can be "ipv4", "ipv6" or "ip". With
* "ip" is autodetects "ipv4" or "ipv6" based on the
* addr.
*
* @param[in] addr A valid ip address string based on the selected family
* (dns names are not allowed!). It's valid to pass NULL,
* which gets mapped to "0.0.0.0" or "::".
*
* @param[in] port A valid port number.
*
* @param[out] _addr A tsocket_address pointer to store the information.
*
* @return 0 on success, -1 on error with errno set.
*/
int tsocket_address_inet_from_strings(TALLOC_CTX *mem_ctx,
const char *fam,
const char *addr,
uint16_t port,
struct tsocket_address **_addr);
#else
int _tsocket_address_inet_from_strings(TALLOC_CTX *mem_ctx,
const char *fam,
const char *addr,
uint16_t port,
struct tsocket_address **_addr,
const char *location);
#define tsocket_address_inet_from_strings(mem_ctx, fam, addr, port, _addr) \
_tsocket_address_inet_from_strings(mem_ctx, fam, addr, port, _addr, \
__location__)
#endif
/**
* @brief Get the address of an 'inet' tsocket_address as a string.
*
* @param[in] addr The address to convert to a string.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @return A newly allocated string of the address, NULL on error
* with errno set.
*
* @see tsocket_address_is_inet()
*/
char *tsocket_address_inet_addr_string(const struct tsocket_address *addr,
TALLOC_CTX *mem_ctx);
/**
* @brief Get the port number as an integer from an 'inet' tsocket_address.
*
* @param[in] addr The tsocket address to use.
*
* @return The port number, 0 on error with errno set.
*/
uint16_t tsocket_address_inet_port(const struct tsocket_address *addr);
/**
* @brief Set the port number of an existing 'inet' tsocket_address.
*
* @param[in] addr The existing tsocket_address to use.
*
* @param[in] port The valid port number to set.
*
* @return 0 on success, -1 on error with errno set.
*/
int tsocket_address_inet_set_port(struct tsocket_address *addr,
uint16_t port);
/**
* @brief Find out if the tsocket_address represents an unix domain endpoint.
*
* @param[in] addr The tsocket_address pointer
*
* @return true if addr represents an unix domain endpoint,
* otherwise false.
*/
bool tsocket_address_is_unix(const struct tsocket_address *addr);
#ifdef DOXYGEN
/**
* @brief Create a tsocket_address for a unix domain endpoint addresses.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] path The filesystem path, NULL will map "".
*
* @param[in] _addr The tsocket_address pointer to store the information.
*
* @return 0 on success, -1 on error with errno set.
*
* @see tsocket_address_is_unix()
*/
int tsocket_address_unix_from_path(TALLOC_CTX *mem_ctx,
const char *path,
struct tsocket_address **_addr);
#else
int _tsocket_address_unix_from_path(TALLOC_CTX *mem_ctx,
const char *path,
struct tsocket_address **_addr,
const char *location);
#define tsocket_address_unix_from_path(mem_ctx, path, _addr) \
_tsocket_address_unix_from_path(mem_ctx, path, _addr, \
__location__)
#endif
/**
* @brief Get the address of an 'unix' tsocket_address.
*
* @param[in] addr A valid 'unix' tsocket_address.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @return The path of the unix domain socket, NULL on error or if
* the tsocket_address doesn't represent an unix domain
* endpoint path.
*/
char *tsocket_address_unix_path(const struct tsocket_address *addr,
TALLOC_CTX *mem_ctx);
#ifdef DOXYGEN
/**
* @brief Wrap an existing file descriptors into the tdgram abstraction.
*
* You can use this function to wrap an existing file descriptors into the
* tdgram abstraction. After that you're not able to use this file descriptor
* for anything else. The file descriptor will be closed when the stream gets
* freed. If you still want to use the fd you have have to create a duplicate.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] fd The non blocking fd to use!
*
* @param[out] dgram A pointer to store an allocated tdgram_context.
*
* @return 0 on success, -1 on error.
*
* Example:
* @code
* fd2 = dup(fd);
* rc = tdgram_bsd_existing_socket(mem_ctx, fd2, &tdgram);
* if (rc < 0) {
* return;
* }
* @endcode
*
* @warning This is an internal function. You should read the code to fully
* understand it if you plan to use it.
*/
int tdgram_bsd_existing_socket(TALLOC_CTX *mem_ctx,
int fd,
struct tdgram_context **dgram);
#else
int _tdgram_bsd_existing_socket(TALLOC_CTX *mem_ctx,
int fd,
struct tdgram_context **_dgram,
const char *location);
#define tdgram_bsd_existing_socket(mem_ctx, fd, dgram) \
_tdgram_bsd_existing_socket(mem_ctx, fd, dgram, \
__location__)
#endif
/**
* @brief Request a syscall optimization for tdgram_recvfrom_send()
*
* This function is only used to reduce the amount of syscalls and
* optimize performance. You should only use this if you know
* what you're doing.
*
* The optimization is off by default.
*
* @param[in] dgram The tdgram_context of a bsd socket, if this
* not a bsd socket the function does nothing.
*
* @param[in] on The boolean value to turn the optimization on and off.
*
* @return The old boolean value.
*
* @see tdgram_recvfrom_send()
*/
bool tdgram_bsd_optimize_recvfrom(struct tdgram_context *dgram,
bool on);
#ifdef DOXYGEN
/**
* @brief Create a tdgram_context for a ipv4 or ipv6 UDP communication.
*
* @param[in] local An 'inet' tsocket_address for the local endpoint.
*
* @param[in] remote An 'inet' tsocket_address for the remote endpoint or
* NULL (??? to create a listener?).
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] dgram The tdgram_context pointer to setup the udp
* communication. The function will allocate the memory.
*
* @return 0 on success, -1 on error with errno set.
*
* @see tdgram_inet_udp_broadcast_socket()
*/
int tdgram_inet_udp_socket(const struct tsocket_address *local,
const struct tsocket_address *remote,
TALLOC_CTX *mem_ctx,
struct tdgram_context **dgram);
#else
int _tdgram_inet_udp_socket(const struct tsocket_address *local,
const struct tsocket_address *remote,
TALLOC_CTX *mem_ctx,
struct tdgram_context **dgram,
const char *location);
#define tdgram_inet_udp_socket(local, remote, mem_ctx, dgram) \
_tdgram_inet_udp_socket(local, remote, mem_ctx, dgram, __location__)
#endif
#ifdef DOXYGEN
/**
* @brief Create a tdgram_context for a ipv4 UDP broadcast (and unicast) communication.
*
* @param[in] local An 'inet' (ipv4 only) tsocket_address for the local endpoint.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] dgram The tdgram_context pointer to setup the udp
* communication. The function will allocate the memory.
*
* @return 0 on success, -1 on error with errno set.
*
* @see tdgram_inet_udp_socket()
*/
int tdgram_inet_udp_broadcast_socket(const struct tsocket_address *local,
TALLOC_CTX *mem_ctx,
struct tdgram_context **dgram);
#else
int _tdgram_inet_udp_broadcast_socket(const struct tsocket_address *local,
TALLOC_CTX *mem_ctx,
struct tdgram_context **dgram,
const char *location);
#define tdgram_inet_udp_broadcast_socket(local, mem_ctx, dgram) \
_tdgram_inet_udp_broadcast_socket(local, mem_ctx, dgram, __location__)
#endif
#ifdef DOXYGEN
/**
* @brief Create a tdgram_context for unix domain datagram communication.
*
* @param[in] local An 'unix' tsocket_address for the local endpoint.
*
* @param[in] remote An 'unix' tsocket_address for the remote endpoint or
* NULL (??? to create a listener?).
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] dgram The tdgram_context pointer to setup the udp
* communication. The function will allocate the memory.
*
* @return 0 on success, -1 on error with errno set.
*/
int tdgram_unix_socket(const struct tsocket_address *local,
const struct tsocket_address *remote,
TALLOC_CTX *mem_ctx,
struct tdgram_context **dgram);
#else
int _tdgram_unix_socket(const struct tsocket_address *local,
const struct tsocket_address *remote,
TALLOC_CTX *mem_ctx,
struct tdgram_context **dgram,
const char *location);
#define tdgram_unix_socket(local, remote, mem_ctx, dgram) \
_tdgram_unix_socket(local, remote, mem_ctx, dgram, __location__)
#endif
/**
* @brief Request a syscall optimization for tstream_readv_send()
*
* This function is only used to reduce the amount of syscalls and
* optimize performance. You should only use this if you know
* what you're doing.
*
* The optimization is off by default.
*
* @param[in] stream The tstream_context of a bsd socket, if this
* not a bsd socket the function does nothing.
*
* @param[in] on The boolean value to turn the optimization on and off.
*
* @return The old boolean value.
*
* @see tstream_readv_send()
*/
bool tstream_bsd_optimize_readv(struct tstream_context *stream,
bool on);
/**
* @brief Connect async to a TCP endpoint and create a tstream_context for the
* stream based communication.
*
* Use this function to connect asynchronously to a remote ipv4 or ipv6 TCP
* endpoint and create a tstream_context for the stream based communication.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] ev The tevent_context to run on.
*
* @param[in] local An 'inet' tsocket_address for the local endpoint.
*
* @param[in] remote An 'inet' tsocket_address for the remote endpoint.
*
* @return A 'tevent_req' handle, where the caller can register a
* callback with tevent_req_set_callback(). NULL on a fatal
* error.
*
* @see tstream_inet_tcp_connect_recv()
*/
struct tevent_req *tstream_inet_tcp_connect_send(TALLOC_CTX *mem_ctx,
struct tevent_context *ev,
const struct tsocket_address *local,
const struct tsocket_address *remote);
#ifdef DOXYGEN
/**
* @brief Receive the result from a tstream_inet_tcp_connect_send().
*
* @param[in] req The tevent request from tstream_inet_tcp_connect_send().
*
* @param[out] perrno The error number, set if an error occurred.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[out] stream A tstream_context pointer to setup the tcp communication
* on. This function will allocate the memory.
*
* @param[out] local The real 'inet' tsocket_address of the local endpoint.
* This parameter is optional and can be NULL.
*
* @return 0 on success, -1 on error with perrno set.
*/
int tstream_inet_tcp_connect_recv(struct tevent_req *req,
int *perrno,
TALLOC_CTX *mem_ctx,
struct tstream_context **stream,
struct tsocket_address **local)
#else
int _tstream_inet_tcp_connect_recv(struct tevent_req *req,
int *perrno,
TALLOC_CTX *mem_ctx,
struct tstream_context **stream,
struct tsocket_address **local,
const char *location);
#define tstream_inet_tcp_connect_recv(req, perrno, mem_ctx, stream, local) \
_tstream_inet_tcp_connect_recv(req, perrno, mem_ctx, stream, local, \
__location__)
#endif
/**
* @brief Connect async to a unix domain endpoint and create a tstream_context
* for the stream based communication.
*
* Use this function to connenct asynchronously to a unix domainendpoint and
* create a tstream_context for the stream based communication.
*
* The callback is triggered when a socket is connected and ready for IO or an
* error happened.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] ev The tevent_context to run on.
*
* @param[in] local An 'unix' tsocket_address for the local endpoint.
*
* @param[in] remote An 'unix' tsocket_address for the remote endpoint.
*
* @return A 'tevent_req' handle, where the caller can register a
* callback with tevent_req_set_callback(). NULL on a falal
* error.
*
* @see tstream_unix_connect_recv()
*/
struct tevent_req * tstream_unix_connect_send(TALLOC_CTX *mem_ctx,
struct tevent_context *ev,
const struct tsocket_address *local,
const struct tsocket_address *remote);
#ifdef DOXYGEN
/**
* @brief Receive the result from a tstream_unix_connect_send().
*
* @param[in] req The tevent request from tstream_inet_tcp_connect_send().
*
* @param[out] perrno The error number, set if an error occurred.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] stream The tstream context to work on.
*
* @return 0 on success, -1 on error with perrno set.
*/
int tstream_unix_connect_recv(struct tevent_req *req,
int *perrno,
TALLOC_CTX *mem_ctx,
struct tstream_context **stream);
#else
int _tstream_unix_connect_recv(struct tevent_req *req,
int *perrno,
TALLOC_CTX *mem_ctx,
struct tstream_context **stream,
const char *location);
#define tstream_unix_connect_recv(req, perrno, mem_ctx, stream) \
_tstream_unix_connect_recv(req, perrno, mem_ctx, stream, \
__location__)
#endif
#ifdef DOXYGEN
/**
* @brief Create two connected 'unix' tsocket_contexts for stream based
* communication.
*
* @param[in] mem_ctx1 The talloc memory context to use for stream1.
*
* @param[in] stream1 The first stream to connect.
*
* @param[in] mem_ctx2 The talloc memory context to use for stream2.
*
* @param[in] stream2 The second stream to connect.
*
* @return 0 on success, -1 on error with errno set.
*/
int tstream_unix_socketpair(TALLOC_CTX *mem_ctx1,
struct tstream_context **stream1,
TALLOC_CTX *mem_ctx2,
struct tstream_context **stream2);
#else
int _tstream_unix_socketpair(TALLOC_CTX *mem_ctx1,
struct tstream_context **_stream1,
TALLOC_CTX *mem_ctx2,
struct tstream_context **_stream2,
const char *location);
#define tstream_unix_socketpair(mem_ctx1, stream1, mem_ctx2, stream2) \
_tstream_unix_socketpair(mem_ctx1, stream1, mem_ctx2, stream2, \
__location__)
#endif
struct sockaddr;
#ifdef DOXYGEN
/**
* @brief Convert a tsocket address to a bsd socket address.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] sa The sockaddr structure to convert.
*
* @param[in] sa_socklen The length of the sockaddr structure.
*
* @param[out] addr The tsocket pointer to allocate and fill.
*
* @return 0 on success, -1 on error with errno set.
*/
int tsocket_address_bsd_from_sockaddr(TALLOC_CTX *mem_ctx,
const struct sockaddr *sa,
size_t sa_socklen,
struct tsocket_address **addr);
#else
int _tsocket_address_bsd_from_sockaddr(TALLOC_CTX *mem_ctx,
const struct sockaddr *sa,
size_t sa_socklen,
struct tsocket_address **_addr,
const char *location);
#define tsocket_address_bsd_from_sockaddr(mem_ctx, sa, sa_socklen, _addr) \
_tsocket_address_bsd_from_sockaddr(mem_ctx, sa, sa_socklen, _addr, \
__location__)
#endif
#ifdef DOXYGEN
/**
* @brief Convert a samba address to a tsocket address.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] s_addr The samba address structure to convert.
*
* @param[out] t_addr The tsocket pointer to allocate and fill.
*
* @return 0 on success, -1 on error with errno set.
*/
int tsocket_address_bsd_from_samba_sockaddr(TALLOC_CTX *mem_ctx,
const struct samba_sockaddr *s_addr,
struct tsocket_address **t_addr);
#else
int _tsocket_address_bsd_from_samba_sockaddr(TALLOC_CTX *mem_ctx,
const struct samba_sockaddr *s_addr,
struct tsocket_address **t_addr,
const char *location);
#define tsocket_address_bsd_from_samba_sockaddr(mem_ctx, s_addr, t_addr) \
_tsocket_address_bsd_from_samba_sockaddr(mem_ctx, s_addr, t_addr, \
__location__)
#endif
/**
* @brief Fill a bsd sockaddr structure.
*
* @param[in] addr The tsocket address structure to use.
*
* @param[in] sa The bsd sockaddr structure to fill out.
*
* @param[in] sa_socklen The length of the bsd sockaddr structure to fill out.
*
* @return The actual size of the sockaddr structure, -1 on error
* with errno set. The size could differ from sa_socklen.
*
* @code
* ssize_t socklen;
* struct sockaddr_storage ss;
*
* socklen = tsocket_address_bsd_sockaddr(taddr,
* (struct sockaddr *) &ss,
* sizeof(struct sockaddr_storage));
* if (socklen < 0) {
* return -1;
* }
* @endcode
*/
ssize_t tsocket_address_bsd_sockaddr(const struct tsocket_address *addr,
struct sockaddr *sa,
size_t sa_socklen);
#ifdef DOXYGEN
/**
* @brief Wrap an existing file descriptors into the tstream abstraction.
*
* You can use this function to wrap an existing file descriptors into the
* tstream abstraction. After that you're not able to use this file descriptor
* for anything else. The file descriptor will be closed when the stream gets
* freed. If you still want to use the fd you have have to create a duplicate.
*
* @param[in] mem_ctx The talloc memory context to use.
*
* @param[in] fd The non blocking fd to use!
*
* @param[out] stream A pointer to store an allocated tstream_context.
*
* @return 0 on success, -1 on error.
*
* Example:
* @code
* fd2 = dup(fd);
* rc = tstream_bsd_existing_socket(mem_ctx, fd2, &tstream);
* if (rc < 0) {
* stream_terminate_connection(conn, "named_pipe_accept: out of memory");
* return;
* }
* @endcode
*
* @warning This is an internal function. You should read the code to fully
* understand it if you plan to use it.
*/
int tstream_bsd_existing_socket(TALLOC_CTX *mem_ctx,
int fd,
struct tstream_context **stream);
#else
int _tstream_bsd_existing_socket(TALLOC_CTX *mem_ctx,
int fd,
struct tstream_context **_stream,
const char *location);
#define tstream_bsd_existing_socket(mem_ctx, fd, stream) \
_tstream_bsd_existing_socket(mem_ctx, fd, stream, \
__location__)
#endif
/**
* @}
*/
/**
* @defgroup tsocket_helper Queue and PDU helpers
* @ingroup tsocket
*
* In order to make the live easier for callers which want to implement a
* function to receive a full PDU with a single async function pair, there're
* some helper functions.
*
* There're some cases where the caller wants doesn't care about the order of
* doing IO on the abstracted sockets.
*
* @{
*/
/**
* @brief Queue a dgram blob for sending through the socket.
*
* This function queues a blob for sending to destination through an existing
* dgram socket. The async callback is triggered when the whole blob is
* delivered to the underlying system socket.
*
* The caller needs to make sure that all non-scalar input parameters hang
* around for the whole lifetime of the request.
*
* @param[in] mem_ctx The memory context for the result.
*
* @param[in] ev The event context the operation should work on.
*
* @param[in] dgram The tdgram_context to send the message buffer.
*
* @param[in] queue The existing dgram queue.
*
* @param[in] buf The message buffer to send.
*
* @param[in] len The message length.
*
* @param[in] dst The destination socket address.
*
* @return The async request handle. NULL on fatal error.
*
* @see tdgram_sendto_queue_recv()
*/
struct tevent_req *tdgram_sendto_queue_send(TALLOC_CTX *mem_ctx,
struct tevent_context *ev,
struct tdgram_context *dgram,
struct tevent_queue *queue,
const uint8_t *buf,
size_t len,
struct tsocket_address *dst);
/**
* @brief Receive the result of the sent dgram blob.
*
* @param[in] req The tevent request from tdgram_sendto_queue_send().
*
* @param[out] perrno The error set to the actual errno.
*
* @return The length of the datagram (0 is never returned!), -1 on
* error with perrno set to the actual errno.
*/
ssize_t tdgram_sendto_queue_recv(struct tevent_req *req, int *perrno);
typedef int (*tstream_readv_pdu_next_vector_t)(struct tstream_context *stream,
void *private_data,
TALLOC_CTX *mem_ctx,
struct iovec **vector,
size_t *count);
struct tevent_req *tstream_readv_pdu_send(TALLOC_CTX *mem_ctx,
struct tevent_context *ev,
struct tstream_context *stream,
tstream_readv_pdu_next_vector_t next_vector_fn,
void *next_vector_private);
int tstream_readv_pdu_recv(struct tevent_req *req, int *perrno);
/**
* @brief Queue a read request for a PDU on the socket.
*
* This function queues a read request for a PDU on a stream socket. The async
* callback is triggered when a full PDU has been read from the socket.
*
* The caller needs to make sure that all non-scalar input parameters hang
* around for the whole lifetime of the request.
*
* @param[in] mem_ctx The memory context for the result
*
* @param[in] ev The tevent_context to run on
*
* @param[in] stream The stream to send data through
*
* @param[in] queue The existing send queue
*
* @param[in] next_vector_fn The next vector function
*
* @param[in] next_vector_private The private_data of the next vector function
*
* @return The async request handle. NULL on fatal error.
*
* @see tstream_readv_pdu_queue_recv()
*/
struct tevent_req *tstream_readv_pdu_queue_send(TALLOC_CTX *mem_ctx,
struct tevent_context *ev,
struct tstream_context *stream,
struct tevent_queue *queue,
tstream_readv_pdu_next_vector_t next_vector_fn,
void *next_vector_private);
/**
* @brief Receive the PDU blob read from the stream.
*
* @param[in] req The tevent request from tstream_readv_pdu_queue_send().
*
* @param[out] perrno The error set to the actual errno.
*
* @return The number of bytes read on success, -1 on error with
* perrno set to the actual errno.
*/
int tstream_readv_pdu_queue_recv(struct tevent_req *req, int *perrno);
/**
* @brief Queue an iovector for sending through the socket
*
* This function queues an iovector for sending to destination through an
* existing stream socket. The async callback is triggered when the whole
* vectror has been delivered to the underlying system socket.
*
* The caller needs to make sure that all non-scalar input parameters hang
* around for the whole lifetime of the request.
*
* @param[in] mem_ctx The memory context for the result.
*
* @param[in] ev The tevent_context to run on.
*
* @param[in] stream The stream to send data through.
*
* @param[in] queue The existing send queue.
*
* @param[in] vector The iovec vector so write.
*
* @param[in] count The size of the vector.
*
* @return The async request handle. NULL on fatal error.
*/
struct tevent_req *tstream_writev_queue_send(TALLOC_CTX *mem_ctx,
struct tevent_context *ev,
struct tstream_context *stream,
struct tevent_queue *queue,
const struct iovec *vector,
size_t count);
/**
* @brief Receive the result of the sent iovector.
*
* @param[in] req The tevent request from tstream_writev_queue_send().
*
* @param[out] perrno The error set to the actual errno.
*
* @return The length of the iovector (0 is never returned!), -1 on
* error with perrno set to the actual errno.
*/
int tstream_writev_queue_recv(struct tevent_req *req, int *perrno);
/**
* @}
*/
#endif /* _TSOCKET_H */