ctdbd.conf 5 ctdb CTDB - clustered TDB database ctdbd.conf CTDB daemon configuration file This file contains CTDB configuration variables that are affect the operation of CTDB. The default location of this file is /etc/ctdb/ctdbd.conf. This file is a shell script (see sh 1) but is usually limited to simple variable assignments and shell-style comments. CTDB configuration variables are grouped into several categories below. Variables defined in this document can also be set in a distribution-specific configuration file such as /etc/sysconfig/ctdb (Red Hat) or /etc/default/ctdb (Debian). However, these files should be reserved for variables used by the initscript. A historical alternative is /etc/ctdb/sysconfig/ctdb - this is deprecated. Some options must be available to the initscript so they need to be set in the distribution-specific initscript configuration, such as /etc/sysconfig/ctdb or /etc/default/ctdb. CTDB_PIDFILE=FILENAME FILENAME is the name of the file used to contain the process ID (PID) of the main CTDB daemon when it is running. This is passed from the initscript to ctdbd_wrapper 1. Default is /var/run/ctdb/ctdbd.pid. Corresponds to --pidfile. These options may be used in the initscripts, daemon and scripts. CTDB_BASE=DIRECTORY DIRECTORY containing CTDB scripts and configuration files. CTDB_VARDIR=DIRECTORY DIRECTORY containing CTDB files that are modified at runtime. Defaults to /var/ctdb, unless /var/lib/ctdb already exists in which case it is used. Variables in this section are processed by ctdbd_wrapper 1 and are converted into command-line arguments to ctdbd 1. Correspondence with ctdbd 1 options is shown for each variable. The the documentation for the relevant options for more details. Many of these variables are also used by event scripts. CTDB_CAPABILITY_LMASTER=yes|no Defaults to yes. Corresponds to --no-lmaster. CTDB_CAPABILITY_RECMASTER=yes|no Defaults to yes. Corresponds to --no-recmaster. CTDB_DBDIR=DIRECTORY Defaults to CTDB_VARDIR. Corresponds to --dbdir. CTDB_DBDIR_PERSISTENT=DIRECTORY Defaults to CTDB_VARDIR/persistent. Corresponds to --dbdir-persistent. CTDB_DBDIR_STATE=DIRECTORY Defaults to CTDB_VARDIR/state. Corresponds to --dbdir-state. CTDB_DEBUGLEVEL=DEBUGLEVEL Default is ERR (0). Corresponds to -d or --debug. CTDB_EVENT_SCRIPT_DIR=DIRECTORY Default is CTDB_BASE/events.d, so usually /etc/ctdb/events.d. Corresponds to --event-script-dir. CTDB_LOGFILE=FILENAME Defaults to /var/log/log.ctdb. Corresponds to --logfile. See also CTDB_SYSLOG. CTDB_LVS_PUBLIC_IP=IPADDR No default. Corresponds to "--lvs --single-public-ip IPADDR". CTDB_NODES=FILENAME Default is CTDB_BASE/nodes, so usually /etc/ctdb/nodes. Corresponds to --nlist. CTDB_NOTIFY_SCRIPT=FILENAME No default, usually /etc/ctdb/notify.sh. Corresponds to --notification-script. CTDB_MAX_PERSISTENT_CHECK_ERRORS=NUM Default 0. Corresponds to --max-persistent-check-errors. CTDB_PUBLIC_ADDRESSES=FILENAME No default, usually /etc/ctdb/public_addresses. Corresponds to --public-addresses. CTDB_PUBLIC_INTERFACE=INTERFACE No default. Corresponds to --public-interface. CTDB_RECOVERY_LOCK=FILENAME Defaults to /some/place/on/shared/storage, which should be change to a useful value. Corresponds to --reclock. CTDB_SCRIPT_LOG_LEVEL=DEBUGLEVEL Defaults to ERR (0). Corresponds to --script-log-level. CTDB_SOCKET=FILENAME Defaults to /tmp/ctdb.socket. Corresponds to --socket. If you change this then you probably want to set this in root's enviroment (perhaps in a file in /etc/profile.d) so that you can use the ctdb 1 command in a straightforward manner. CTDB_START_AS_DISABLED=yes|no Default is no. Corresponds to --start-as-disabled. CTDB_START_AS_STOPPED=yes|no Default is no. Corresponds to --start-as-stopped. CTDB_SYSLOG=yes|no Default is no. Corresponds to --syslog. CTDB_TRANSPORT=tcp|infiniband Defaults to tcp. Corresponds to --transport. While the following variables do not translate into daemon options they are used by ctdbd_wrapper 1 when starting and stopping ctdbd 1. CTDB_SHUTDOWN_TIMEOUT=NUM NUM is the number of seconds to wait for ctdbd 1 to shut down gracefully before giving up and killing it. Defaults is 30. CTDB_STARTUP_TIMEOUT=NUM NUM is the number of seconds to wait for ctdbd 1 complete early initialisation up to a point where it is unlikely to abort. If ctdbd doesn't complete the "setup" event before this timeout then it is killed. Defaults is 10. NAT gateway is used to configure fallback routing for nodes when they do not host any public IP addresses. For example, it allows unhealthy nodes to reliably communicate with external infrastructure. One node in a NAT gateway group will be designated as the NAT gateway master node and other (slave) nodes will be configured with fallback routes via the NAT gateway master node. For more information, see the NAT GATEWAY section in ctdb 7. CTDB_NATGW_DEFAULT_GATEWAY=IPADDR IPADDR is an alternate network gateway to use on the NAT gateway master node. If set, a fallback default route is added via this network gateway. No default. Setting this variable is optional - if not set that no route is created on the NAT gateway master node. CTDB_NATGW_NODES=FILENAME FILENAME contains the list of nodes that belong to the same NAT gateway group. File format: IPADDR No default, usually /etc/ctdb/natgw_nodes when enabled. CTDB_NATGW_PRIVATE_NETWORK=IPADDR/MASK IPADDR/MASK is the private sub-network that is internally routed via the NAT gateway master node. This is usually the private network that is used for node addresses. No default. CTDB_NATGW_PUBLIC_IFACE=IFACE IFACE is the network interface on which the CTDB_NATGW_PUBLIC_IP will be configured. No default. CTDB_NATGW_PUBLIC_IP=IPADDR/MASK IPADDR/MASK indicates the IP address that is used for outgoing traffic (originating from CTDB_NATGW_PRIVATE_NETWORK) on the NAT gateway master node. This must not be a configured public IP address. No default. CTDB_NATGW_SLAVE_ONLY=yes|no When set to "yes" a node can not be a NAT gateway master node. In this case CTDB_NATGW_PUBLIC_IFACE and CTDB_NATGW_PUBLIC_IP are optional and unused. Default is no. CTDB_NATGW_STATIC_ROUTES=IPADDR/MASK[@GATEWAY] ... Each IPADDR/MASK identifies a network or host to which NATGW should create a fallback route, instead of creating a single default route. This can be used when there is already a default route, via an interface that can not reach required infrastructure, that overrides the NAT gateway default route. If GATEWAY is specified then the corresponding route on the NATGW master node will be via GATEWAY. Such routes are created even if CTDB_NATGW_DEFAULT_GATEWAY is not specified. If GATEWAY is not specified for some networks then routes are only created on the NATGW master node for those networks if CTDB_NATGW_DEFAULT_GATEWAY is specified. This should be used with care to avoid causing traffic to unnecessarily double-hop through the NAT gateway master, even when a node is hosting public IP addresses. Each specified network or host should probably have a corresponding automatically created link route or static route to avoid this. No default. CTDB_NATGW_NODES=/etc/ctdb/natgw_nodes CTDB_NATGW_PRIVATE_NETWORK=192.168.1.0/24 CTDB_NATGW_DEFAULT_GATEWAY=10.0.0.1 CTDB_NATGW_PUBLIC_IP=10.0.0.227/24 CTDB_NATGW_PUBLIC_IFACE=eth0 A variation that ensures that infrastructure (ADS, DNS, ...) directly attached to the public network (10.0.0.0/24) is always reachable would look like this: CTDB_NATGW_NODES=/etc/ctdb/natgw_nodes CTDB_NATGW_PRIVATE_NETWORK=192.168.1.0/24 CTDB_NATGW_PUBLIC_IP=10.0.0.227/24 CTDB_NATGW_PUBLIC_IFACE=eth0 CTDB_NATGW_STATIC_ROUTES=10.0.0.0/24 Note that CTDB_NATGW_DEFAULT_GATEWAY is not specified. A node running CTDB may be a component of a complex network topology. In particular, public addresses may be spread across several different networks (or VLANs) and it may not be possible to route packets from these public addresses via the system's default route. Therefore, CTDB has support for policy routing via the 13.per_ip_routing eventscript. This allows routing to be specified for packets sourced from each public address. The routes are added and removed as CTDB moves public addresses between nodes. For more information, see the POLICY ROUTING section in ctdb 7. CTDB_PER_IP_ROUTING_CONF=FILENAME FILENAME contains elements for constructing the desired routes for each source address. The special FILENAME value __auto_link_local__ indicates that no configuration file is provided and that CTDB should generate reasonable link-local routes for each public IP address. File format: IPADDR DEST-IPADDR/MASK GATEWAY-IPADDR No default, usually /etc/ctdb/policy_routing when enabled. CTDB_PER_IP_ROUTING_RULE_PREF=NUM NUM sets the priority (or preference) for the routing rules that are added by CTDB. This should be (strictly) greater than 0 and (strictly) less than 32766. A priority of 100 is recommended, unless this conflicts with a priority already in use on the system. See ip 8, for more details. CTDB_PER_IP_ROUTING_TABLE_ID_LOW=LOW-NUM, CTDB_PER_IP_ROUTING_TABLE_ID_HIGH=HIGH-NUM CTDB determines a unique routing table number to use for the routing related to each public address. LOW-NUM and HIGH-NUM indicate the minimum and maximum routing table numbers that are used. ip 8 uses some reserved routing table numbers below 255. Therefore, CTDB_PER_IP_ROUTING_TABLE_ID_LOW should be (strictly) greater than 255. CTDB uses the standard file /etc/iproute2/rt_tables to maintain a mapping between the routing table numbers and labels. The label for a public address ADDR will look like ctdb.addr. This means that the associated rules and routes are easy to read (and manipulate). No default, usually 1000 and 9000. CTDB_PER_IP_ROUTING_CONF=/etc/ctdb/policy_routing CTDB_PER_IP_ROUTING_RULE_PREF=100 CTDB_PER_IP_ROUTING_TABLE_ID_LOW=1000 CTDB_PER_IP_ROUTING_TABLE_ID_HIGH=9000 CTDB_PARTIALLY_ONLINE_INTERFACES=yes|no Whether one or more offline interfaces should cause a monitor event to fail if there are other interfaces that are up. If this is "yes" and a node has some interfaces that are down then ctdb status will display the node as "PARTIALLYONLINE". Default is "no". CTDB can be configured to manage and/or monitor various NAS (and other) services via its eventscripts. In the simplest case CTDB will manage a service. This means the service will be started and stopped along with CTDB, CTDB will monitor the service and CTDB will do any required reconfiguration of the service when public IP addresses are failed over. 49.winbind 50.samba CTDB_MANAGES_SAMBA=yes|no Should CTDB manage Samba? Default is no. CTDB_MANAGES_WINBIND=yes|no Should CTDB manage Winbind? Default is no. CTDB_SAMBA_CHECK_PORTS=PORT-LIST When monitoring Samba, check TCP ports in space-separated PORT-LIST. Default is to monitor ports that Samba is configured to listen on. CTDB_SAMBA_SKIP_SHARE_CHECK=yes|no As part of monitoring, should CTDB skip the check for the existence of each directory configured as share in Samba. This may be desirable if there is a large number of shares. Default is no. CTDB_SERVICE_NMB=SERVICE Distribution specific SERVICE for managing nmbd. Default is distribution-dependant. CTDB_SERVICE_SMB=SERVICE Distribution specific SERVICE for managing smbd. Default is distribution-dependant. CTDB_SERVICE_WINBIND=SERVICE Distribution specific SERVICE for managing winbindd. Default is "winbind". This includes parameters for the kernel NFS server and the user-space NFS-Ganesha server. 60.nfs 60.ganesha CTDB_CLUSTER_FILESYSTEM_TYPE=gpfs The type of cluster filesystem to use with NFS-ganesha. Currently only "gpfs" is supported. Default is "gpfs". CTDB_GANESHA_REC_SUBDIRSUBDIR SUBDIR is the name of a top-level subdirectory in the first cluster filesystem. This subdirectory is used to allow communication between NFS-Ganesha and the 60.ganesha script. Default is ".ganesha". CTDB_MANAGES_NFS=yes|no Should CTDB manage NFS? Default is no. CTDB_MONITOR_NFS_THREAD_COUNT=yes|no Whether to monitor the NFS kernel server thread count. This works around a limitation in some NFS initscripts where some threads can be stuck in host filesystem calls (perhaps due to slow storage), a restart occurs, some threads don't exit, the start only adds the missing number of threads, the stuck threads exit, and the result is a lower than expected thread count. Note that if you must also set RPCNFSDCOUNT (RedHat/Debian) or USE_KERNEL_NFSD_NUMBER (SUSE) in your NFS configuration so the monitoring code knows how many threads there should be - if neither of these are set then this option will be ignored. Default is no. CTDB_NFS_DUMP_STUCK_THREADS=NUM NUM is the number of NFS kernel server threads to dump stack traces for if some are still alive after stopping NFS during a restart. Default is 5. Set this to 0 to disable this feature. CTDB_NFS_SERVER_MODE=kernel|ganesha Selects which NFS server to be managed. This replaces the deprecated variable NFS_SERVER_MODE. Default is "kernel". CTDB_NFS_SKIP_KNFSD_ALIVE_CHECK=yes|no During monitoring, should CTDB skip the rpcinfo check that is used to see if the NFS kernel server is functional. Default is no. CTDB_NFS_SKIP_SHARE_CHECK=yes|no As part of monitoring, should CTDB skip the check for the existence of each directory exported via NFS. This may be desirable if there is a large number of exports. Default is no. CTDB_RPCINFO_LOCALHOST=IPADDR|HOSTNAME IPADDR or HOSTNAME indicates the address that rpcinfo should connect to when doing rpcinfo check on RPC service during monitoring. Optimally this would be "localhost". However, this can add some performance overheads. Default is "127.0.0.1". CTDB_SKIP_GANESHA_NFSD_CHECK=yes|no As part of monitoring, should CTDB skip the check for the existence of each directory exported via NFS-Ganesha. This may be desirable if there is a large number of exports. Default is no. CTDB can manage the Apache web server. 41.httpd CTDB_MANAGES_HTTPD=yes|no Should CTDB manage the Apache web server? Default is no. CTDB has support to manage the popular anti-virus daemon ClamAV. 31.clamd This eventscript is not enabled by default. Use ctdb enablescript to enable it. CTDB_MANAGES_CLAMD=yes|no Should CTDB manage ClamAV? Default is no. CTDB_CLAMD_SOCKET=FILENAME FILENAME is the socket to monitor ClamAV. No default. CTDB has support for managing the Linux iSCSI tgtd service. 70.iscsi CTDB_MANAGES_ISCSI=yes|no Should CTDB manage iSCSI tgtd? Default is no. CTDB_START_ISCSI_SCRIPTS=DIRECTORY DIRECTORY on shared storage containing scripts to start tgtd for each public IP address. No default. CTDB can monitor multipath devices to ensure that active paths are available. 20.multipathd This eventscript is not enabled by default. Use ctdb enablescript to enable it. CTDB_MONITOR_MPDEVICES=MP-DEVICE-LIST MP-DEVICE-LIST is a list of multipath devices for CTDB to monitor? No default. CTDB can manage the vsftpd FTP server. 40.vsftpd CTDB_MANAGES_VSFTPD=yes|no Should CTDB manage the vsftpd FTP server? Default is no. CTDB can experience seemingly random (performance and other) issues if system resources become too contrained. Options in this section can be enabled to allow certain system resources to be checked. 00.ctdb 40.fs_use Filesystem usage monitoring is in 40.fs_use. This eventscript is not enabled by default. Use ctdb enablescript to enable it. CTDB_CHECK_FS_USE=FS-LIMIT-LIST FS-LIMIT-LIST is a space-separated list of FILESYSTEM:LIMIT pairs indicating that a node should be flagged unhealthy if the space used on FILESYSTEM reaches LIMIT%. No default. Note that this feature uses the 40.fs_use eventscript, which is not enabled by default. Use ctdb enablescript to enable it. CTDB_CHECK_SWAP_IS_NOT_USED=yes|no Should a warning be logged if swap space is in use. Default is no. CTDB_MONITOR_FREE_MEMORY=NUM NUM is a lower limit on available system memory, expressed in megabytes. If this is set and the amount of available memory falls below this limit then some debug information will be logged, the node will be disabled and then CTDB will be shut down. No default. CTDB_MONITOR_FREE_MEMORY_WARN=NUM NUM is a lower limit on available system memory, expressed in megabytes. If this is set and the amount of available memory falls below this limit then a warning will be logged. No default. CTDB_MANAGED_SERVICES=SERVICE-LIST SERVICE-LIST is a space-separated list of SERVICEs that CTDB should manage. This can be used as an alternative to the CTDB_MANAGES_SERVICE variables. No default. CTDB_SERVICE_AUTOSTARTSTOP=yes|no When CTDB should start and stop services if they become managed or unmanaged. Default is no. CTDB tunables (see ctdbd-tunables 7) can be set from the configuration file. They are set as follows: CTDB_SET_TUNABLE=VALUE For example: CTDB_SET_MonitorInterval=20 Variable in this section are for debugging and testing CTDB. They should not generally be needed. CTDB_DEBUG_HUNG_SCRIPT=FILENAME FILENAME is a script to run to log debug information when an event script times out. Default is CTDB_BASE/debug-hung-script.sh. CTDB_DEBUG_HUNG_SCRIPT_LOGFILE=FILENAME FILENAME specifies where log messages should go when debugging hung eventscripts. This is a testing option. See also CTDB_DEBUG_HUNG_SCRIPT. No default. Messages go to stdout/stderr and are logged to the same place as other CTDB log messages. CTDB_DEBUG_HUNG_SCRIPT_STACKPAT=REGEXP REGEXP specifies interesting processes for which stack traces should be logged when debugging hung eventscripts and those processes are matched in pstree output. See also CTDB_DEBUG_HUNG_SCRIPT. Default is "exportfs\|rpcinfo". CTDB_DEBUG_LOCKS=FILENAME FILENAME is a script to run to log debug information when an CTDB fails to freeze databases during recovery. No default, usually CTDB_BASE/debug_locks.sh. CTDB_ETCDIR=DIRECTORY DIRECTORY containing system configuration files. This is used to provide alternate configuration when testing and should not need to be changed from the default. Default is /etc. CTDB_INIT_STYLE=debian|redhat|suse This is the init style used by the Linux distribution (or other operating system) being used. This is usually determined dynamically by checking the system. This variable is used by the initscript to determine which init system primitives to use. It is also used by some eventscripts to choose the name of initscripts for certain services, since these can vary between distributions. No fixed default. If this option needs to be changed from the calculated default for the initscript to function properly, then it must be set in the distribution-specific initscript configuration, such as /etc/sysconfig/ctdb CTDB_MAX_CORRUPT_DB_BACKUPS=NUM NUM is the maximum number of volatile TDB database backups to be kept (for each database) when a corrupt database is found during startup. Volatile TDBs are zeroed during startup so backups are needed to debug any corruption that occurs before a restart. Default is 10. CTDB_RC_LOCAL=FILENAME FILENAME is a script fragment to be sourced by the functions that is sourced by scripts. On example use would be to override function definitions in unit tests. As a sanity check, this file must be executable for it to be used. No default. CTDB_RUN_TIMEOUT_MONITOR=yes|no Whether CTDB should simulate timing out monitor events. This uses the 99.timeout eventscript. Default is no. CTDB_SCRIPT_DEBUGLEVEL=NUM NUM is the level debugging messages printed by CTDB scripts. Setting this to a higher number (e.g. 4) will cause some scripts to log more messages. Default is 2. CTDB_SUPPRESS_COREFILE=yes|no Whether CTDB core files should be suppressed. Default is no. CTDB_VALGRIND=yes|no|COMMAND If "yes", this causes ctdbd 1 to be run under valgrind 1 with logs going to /var/log/ctdb_valgrind. If neither "yes" nor "no" then the value is assumed to be a COMMAND (e.g. a valgrind variation, a gdb 1 command) that is used in place of the default valgrind command. In either case, the --valgrind option is passed to ctdbd. Default is no. /etc/ctdb/ctdbd.conf /etc/sysconfig/ctdb /etc/default/ctdb /etc/ctdb/sysconfig/ctdb ctdbd 1, ctdbd_wrapper 1, onnode 1, ctdb 7, ctdb-tunables 7, This documentation was written by Amitay Isaacs, Martin Schwenke 2007 Andrew Tridgell Ronnie Sahlberg This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, see .