From fd789b2c69ce3005cf9747fe525ee3a9e12b7e5b Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 19 Dec 2017 15:11:43 -0700 Subject: third_party: Add gpfs.h header file This is the only requirement for building the vfs_gpfs module; the corresponding library is opened through dlopen at runtime. The intent here is to always build the vfs_gpfs module to easily detect breakage e.g. due to vfs interface changes. Signed-off-by: Christof Schmitt Reviewed-by: Volker Lendecke --- third_party/gpfs/gpfs.h | 4042 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 4042 insertions(+) create mode 100644 third_party/gpfs/gpfs.h (limited to 'third_party') diff --git a/third_party/gpfs/gpfs.h b/third_party/gpfs/gpfs.h new file mode 100644 index 00000000000..acafe12c2e7 --- /dev/null +++ b/third_party/gpfs/gpfs.h @@ -0,0 +1,4042 @@ +/* */ +/* Copyright (C) 2001 International Business Machines */ +/* All rights reserved. */ +/* */ +/* This file is part of the GPFS user library. */ +/* */ +/* Redistribution and use in source and binary forms, with or without */ +/* modification, are permitted provided that the following conditions */ +/* are met: */ +/* */ +/* 1. Redistributions of source code must retain the above copyright notice, */ +/* this list of conditions and the following disclaimer. */ +/* 2. Redistributions in binary form must reproduce the above copyright */ +/* notice, this list of conditions and the following disclaimer in the */ +/* documentation and/or other materials provided with the distribution. */ +/* 3. The name of the author may not be used to endorse or promote products */ +/* derived from this software without specific prior written */ +/* permission. */ +/* */ +/* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR */ +/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES */ +/* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. */ +/* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, */ +/* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */ +/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */ +/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */ +/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */ +/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF */ +/* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +/* */ +/* @(#)42 1.1.12.3 src/avs/fs/mmfs/ts/util/gpfs.h, mmfs, avs_rttn423, rttn423s001a 4/10/17 10:46:33 */ +/* + * Library calls for GPFS interfaces + */ +#ifndef H_GPFS +#define H_GPFS + +#include + +/* Define GPFS_64BIT_INODES to map the default interface definitions + to 64-bit interfaces. Without this define, the 32-bit interface + is the default. Both interfaces are always present, but the + define sets the default. The actual mapping can be found near the + end of this header. */ +/* #define GPFS_64BIT_INODES 1 */ + +#define NFS_IP_SIZE 32 + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(WIN32) && defined(GPFSDLL) + + /* The following errno values either are missing from Windows errno.h or + have a conflicting value. Other errno values (e.g. EPERM) are okay. */ + #define GPFS_EALREADY 37 /* Operation already in progress */ + #define GPFS_EOPNOTSUPP 45 /* Operation not supported */ + #define GPFS_EDQUOT 69 /* Disk quota exceeded */ + #define GPFS_ESTALE 9 /* No file system (mapped to EBADF) */ + #define GPFS_EFORMAT 19 /* Unformatted media (mapped to ENODEV) */ + + /* specify the library calling convention */ + #define GPFS_API __stdcall + + /* On Windows, this is a HANDLE as returned by CreateFile() */ + typedef void* gpfs_file_t; + +#else /* not gpfs.dll on Windows */ + + #define GPFS_API + /* On UNIX systems, this is a file descriptor as returned by open() */ + typedef int gpfs_file_t; + +#endif + + +typedef unsigned int gpfs_uid_t; +typedef long long gpfs_off64_t; +typedef unsigned long long gpfs_uid64_t; + +typedef struct gpfs_timestruc +{ + unsigned int tv_sec; + unsigned int tv_nsec; +} gpfs_timestruc_t; + +typedef struct gpfs_timestruc64 +{ + long long tv_sec; + unsigned int tv_nsec; +} gpfs_timestruc64_t; + +#define GPFS_SLITE_SIZE_BIT 0x00000001 +#define GPFS_SLITE_BLKSIZE_BIT 0x00000002 +#define GPFS_SLITE_BLOCKS_BIT 0x00000004 +#define GPFS_SLITE_ATIME_BIT 0x00000010 +#define GPFS_SLITE_MTIME_BIT 0x00000020 +#define GPFS_SLITE_CTIME_BIT 0x00000040 +#define GPFS_SLITE_EXACT_BITS 0x00000077 + +/* Returns "1" if the attribute is requested to be accurate. + (On output, indicates the value returned in statbufP is accurate). */ +#define GPFS_SLITE(m) (0 == (m)) +#define GPFS_SLITE_SIZET(m) (0 != ((m) & GPFS_SLITE_SIZE_BIT)) +#define GPFS_SLITE_BLKSIZE(m) (0 != ((m) & GPFS_SLITE_BLKSIZE_BIT)) +#define GPFS_SLITE_BLOCKS(m) (0 != ((m) & GPFS_SLITE_BLOCKS_BIT)) +#define GPFS_SLITE_ATIME(m) (0 != ((m) & GPFS_SLITE_ATIME_BIT)) +#define GPFS_SLITE_MTIME(m) (0 != ((m) & GPFS_SLITE_MTIME_BIT)) +#define GPFS_SLITE_CTIME(m) (0 != ((m) & GPFS_SLITE_CTIME_BIT)) +#define GPFS_SLITE_EXACT(m) (GPFS_SLITE_EXACT_BITS == (m)) + +/* Sets the litemask bit indicating that the attribute should be accurate */ +#define GPFS_S_SLITE(m) (m) = 0 +#define GPFS_S_SLITE_SIZET(m) (m) |= GPFS_SLITE_SIZE_BIT +#define GPFS_S_SLITE_BLKSIZE(m) (m) |= GPFS_SLITE_BLKSIZE_BIT +#define GPFS_S_SLITE_BLOCKS(m) (m) |= GPFS_SLITE_BLOCKS_BIT +#define GPFS_S_SLITE_ATIME(m) (m) |= GPFS_SLITE_ATIME_BIT +#define GPFS_S_SLITE_MTIME(m) (m) |= GPFS_SLITE_MTIME_BIT +#define GPFS_S_SLITE_CTIME(m) (m) |= GPFS_SLITE_CTIME_BIT +#define GPFS_S_SLITE_EXACT(m) (m) |= GPFS_SLITE_EXACT_BITS + +#define GPFS_STATLITE 0 +#define GPFS_NOFOLLOW 1 + +/* Mapping of buffer for gpfs_getacl, gpfs_putacl. */ +typedef struct gpfs_opaque_acl +{ + int acl_buffer_len; /* INPUT: Total size of buffer (including this field). + OUTPUT: Actual size of the ACL information. */ + unsigned short acl_version; /* INPUT: Set to zero. + OUTPUT: Current version of the returned ACL. */ + unsigned char acl_type; /* INPUT: Type of ACL: access (1) or default (2). */ + char acl_var_data[1]; /* OUTPUT: Remainder of the ACL information. */ +} gpfs_opaque_acl_t; + +/* ACL types (acl_type field in gpfs_opaque_acl_t or gpfs_acl_t) */ +#define GPFS_ACL_TYPE_ACCESS 1 +#define GPFS_ACL_TYPE_DEFAULT 2 +#define GPFS_ACL_TYPE_NFS4 3 + +/* gpfs_getacl, gpfs_putacl flag indicating structures instead of the + opaque style data normally used. */ +#define GPFS_GETACL_STRUCT 0x00000020 +#define GPFS_PUTACL_STRUCT 0x00000020 + +/* gpfs_getacl, gpfs_putacl flag indicating smbd is the caller */ +#define GPFS_ACL_SAMBA 0x00000040 + +/* Defined values for gpfs_aclVersion_t */ +#define GPFS_ACL_VERSION_POSIX 1 +#define GPFS_ACL_VERSION_NFS4F 3 /* GPFS_ACL_VERSION_NFS4 plus V4FLAGS */ +#define GPFS_ACL_VERSION_NFS4 4 + +/* Values for gpfs_aclLevel_t */ +#define GPFS_ACL_LEVEL_BASE 0 /* compatible with all acl_version values */ +#define GPFS_ACL_LEVEL_V4FLAGS 1 /* requires GPFS_ACL_VERSION_NFS4 */ + +/* Values for gpfs_aceType_t (ACL_VERSION_POSIX) */ +#define GPFS_ACL_USER_OBJ 1 +#define GPFS_ACL_GROUP_OBJ 2 +#define GPFS_ACL_OTHER 3 +#define GPFS_ACL_MASK 4 +#define GPFS_ACL_USER 5 +#define GPFS_ACL_GROUP 6 + +/* Values for gpfs_acePerm_t (ACL_VERSION_POSIX) */ +#define ACL_PERM_EXECUTE 001 +#define ACL_PERM_WRITE 002 +#define ACL_PERM_READ 004 +#define ACL_PERM_CONTROL 010 + +/* Values for gpfs_aceType_t (ACL_VERSION_NFS4) */ +#define ACE4_TYPE_ALLOW 0 +#define ACE4_TYPE_DENY 1 +#define ACE4_TYPE_AUDIT 2 +#define ACE4_TYPE_ALARM 3 + +/* Values for gpfs_aceFlags_t (ACL_VERSION_NFS4) */ +#define ACE4_FLAG_FILE_INHERIT 0x00000001 +#define ACE4_FLAG_DIR_INHERIT 0x00000002 +#define ACE4_FLAG_NO_PROPAGATE 0x00000004 +#define ACE4_FLAG_INHERIT_ONLY 0x00000008 +#define ACE4_FLAG_SUCCESSFUL 0x00000010 +#define ACE4_FLAG_FAILED 0x00000020 +#define ACE4_FLAG_GROUP_ID 0x00000040 +#define ACE4_FLAG_INHERITED 0x00000080 + +/* GPFS-defined flags. Placed in a separate ACL field to avoid + ever running into newly defined NFSv4 flags. */ +#define ACE4_IFLAG_SPECIAL_ID 0x80000000 + +/* Values for gpfs_aceMask_t (ACL_VERSION_NFS4) */ +#define ACE4_MASK_READ 0x00000001 +#define ACE4_MASK_LIST_DIR 0x00000001 +#define ACE4_MASK_WRITE 0x00000002 +#define ACE4_MASK_ADD_FILE 0x00000002 +#define ACE4_MASK_APPEND 0x00000004 +#define ACE4_MASK_ADD_SUBDIR 0x00000004 +#define ACE4_MASK_READ_NAMED 0x00000008 +#define ACE4_MASK_WRITE_NAMED 0x00000010 +#define ACE4_MASK_EXECUTE 0x00000020 + +/* The rfc doesn't provide a mask equivalent to "search" ("x" on a + * directory in posix), but it also doesn't say that its EXECUTE + * is to have this dual use (even though it does so for other dual + * use permissions such as read/list. Going to make the assumption + * here that the EXECUTE bit has this dual meaning... otherwise + * we're left with no control over search. + */ +#define ACE4_MASK_SEARCH 0x00000020 + +#define ACE4_MASK_DELETE_CHILD 0x00000040 +#define ACE4_MASK_READ_ATTR 0x00000080 +#define ACE4_MASK_WRITE_ATTR 0x00000100 +#define ACE4_MASK_DELETE 0x00010000 +#define ACE4_MASK_READ_ACL 0x00020000 +#define ACE4_MASK_WRITE_ACL 0x00040000 +#define ACE4_MASK_WRITE_OWNER 0x00080000 +#define ACE4_MASK_SYNCHRONIZE 0x00100000 +#define ACE4_MASK_ALL 0x001f01ff + +/* Values for gpfs_uid_t (ACL_VERSION_NFS4) */ +#define ACE4_SPECIAL_OWNER 1 +#define ACE4_SPECIAL_GROUP 2 +#define ACE4_SPECIAL_EVERYONE 3 + +/* per-ACL flags imported from a Windows security descriptor object */ +#define ACL4_FLAG_OWNER_DEFAULTED 0x00000100 +#define ACL4_FLAG_GROUP_DEFAULTED 0x00000200 +#define ACL4_FLAG_DACL_PRESENT 0x00000400 +#define ACL4_FLAG_DACL_DEFAULTED 0x00000800 +#define ACL4_FLAG_SACL_PRESENT 0x00001000 +#define ACL4_FLAG_SACL_DEFAULTED 0x00002000 +#define ACL4_FLAG_DACL_UNTRUSTED 0x00004000 +#define ACL4_FLAG_SERVER_SECURITY 0x00008000 +#define ACL4_FLAG_DACL_AUTO_INHERIT_REQ 0x00010000 +#define ACL4_FLAG_SACL_AUTO_INHERIT_REQ 0x00020000 +#define ACL4_FLAG_DACL_AUTO_INHERITED 0x00040000 +#define ACL4_FLAG_SACL_AUTO_INHERITED 0x00080000 +#define ACL4_FLAG_DACL_PROTECTED 0x00100000 +#define ACL4_FLAG_SACL_PROTECTED 0x00200000 +#define ACL4_FLAG_RM_CONTROL_VALID 0x00400000 +#define ACL4_FLAG_NULL_DACL 0x00800000 +#define ACL4_FLAG_NULL_SACL 0x01000000 +#define ACL4_FLAG_VALID_FLAGS 0x01ffff00 + + +/* Externalized ACL defintions */ +typedef unsigned int gpfs_aclType_t; +typedef unsigned int gpfs_aclLen_t; +typedef unsigned int gpfs_aclLevel_t; +typedef unsigned int gpfs_aclVersion_t; +typedef unsigned int gpfs_aclCount_t; +typedef unsigned int gpfs_aclFlag_t; + +typedef unsigned int gpfs_aceType_t; +typedef unsigned int gpfs_aceFlags_t; +typedef unsigned int gpfs_acePerm_t; +typedef unsigned int gpfs_aceMask_t; + +/* A POSIX ACL Entry */ +typedef struct gpfs_ace_v1 +{ + gpfs_aceType_t ace_type; /* POSIX ACE type */ + gpfs_uid_t ace_who; /* uid/gid */ + gpfs_acePerm_t ace_perm; /* POSIX permissions */ +} gpfs_ace_v1_t; + +/* An NFSv4 ACL Entry */ +typedef struct gpfs_ace_v4 +{ + gpfs_aceType_t aceType; /* Allow or Deny */ + gpfs_aceFlags_t aceFlags; /* Inherit specifications, etc. */ + gpfs_aceFlags_t aceIFlags; /* GPFS Internal flags */ + gpfs_aceMask_t aceMask; /* NFSv4 mask specification */ + gpfs_uid_t aceWho; /* User/Group identification */ +} gpfs_ace_v4_t; + +/* when GPFS_ACL_VERSION_NFS4, and GPFS_ACL_LEVEL_V4FLAGS */ +typedef struct v4Level1_ext /* ACL extension */ +{ + gpfs_aclFlag_t acl_flags; /* per-ACL flags */ + gpfs_ace_v4_t ace_v4[1]; +} v4Level1_t; + +/* The GPFS ACL */ +typedef struct gpfs_acl +{ + gpfs_aclLen_t acl_len; /* Total length of this ACL in bytes */ + gpfs_aclLevel_t acl_level; /* Reserved (must be zero) */ + gpfs_aclVersion_t acl_version; /* POSIX or NFS4 ACL */ + gpfs_aclType_t acl_type; /* Access, Default, or NFS4 */ + gpfs_aclCount_t acl_nace; /* Number of Entries that follow */ + union + { + gpfs_ace_v1_t ace_v1[1]; /* when GPFS_ACL_VERSION_POSIX */ + gpfs_ace_v4_t ace_v4[1]; /* when GPFS_ACL_VERSION_NFS4 */ + v4Level1_t v4Level1; /* when GPFS_ACL_LEVEL_V4FLAGS */ + }; +} gpfs_acl_t; + + +/* NAME: gpfs_getacl() + * + * FUNCTION: Retrieves the ACL information for a file. + * + * The aclP parameter must point to a buffer mapped by either: + * - gpfs_opaque_acl_t (when flags are zero). In this case, + * the opaque data that is intended to be used by a backup + * program (restoreed by passing this data back on a subsequent + * call to gpfs_putacl). + * - gpfs_acl_t (when GPFS_GETACL_STRUCT is specified). In this + * case, the data can be interpreted by the calling application + * (and may be modified and applied to the file by passing it + * to gpfs_putacl...along with the GPFS_PUTACL_STRUCT flag). + * + * On input, the first four bytes of the buffer must contain its + * total size. + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS function not available + * ENOSPC buffer too small to return the entire ACL. + * Needed size is returned in the first four + * bytes of the buffer pointed to by aclP. + * EINVAL Invalid arguments + * ENOTDIR Not on directory + * ENOMEM Out of memory + */ +int GPFS_API +gpfs_getacl(const char *pathname, + int flags, + void *acl); + + +/* NAME: gpfs_putacl() + * + * FUNCTION: Sets the ACL information for a file. + * The buffer passed in should contain the ACL data + * that was obtained by a previous call to gpfs_getacl. + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS function not available + * EINVAL Invalid arguments + * ENOTDIR Not on directory + * ENOMEM Out of memory + * EPERM Caller does not hold appropriate privilege + */ +int GPFS_API +gpfs_putacl(const char *pathname, + int flags, + void *acl); + + +/* NAME: gpfs_prealloc() + * + * FUNCTION: Preallocate disk storage for a file or directory, starting + * at the specified startOffset and covering at least the number + * of bytes requested by bytesToPrealloc. Allocations are rounded + * to block boundaries (block size can be found in st_blksize + * returned by fstat()), or possibly larger sizes. For files, the + * file descriptor must be open for write, but any existing data + * already present will not be modified. Reading the preallocated + * blocks will return zeros. For directories, the file descriptor + * may be open for read but the caller must have write permission, + * and existing entries are unaffected; startOffset must be zero. + * + * This function implements the behavior of mmchattr when invoked + * with --compact[=minimumEntries]. The minimumEntries value + * specifies both the lower bound on automatic compaction and the + * desired size for pre-allocation. It defaults to zero, meaning + * no pre-allocation and compact the directory as much as + * possible. The mapping between minimumEntries and the + * bytesToPrealloc is given by GPFS_PREALLOC_DIR_SLOT_SIZE, see + * below. + * + * Directory compaction (zero bytesToPrealloc) requires a file + * system supporting V2 directories (format version 1400, v4.1). + * Directories created before upgrading the file system to version + * 4.1, are upgraded from V1 to V2 by this operation even if no + * other change is made. Since v4.2.2, bytesToPrealloc may be + * nonzero effecting pre-allocation by setting a minimum + * compaction size. Prior to v4.2.2 the minimum size of any + * directory is zero. + * + * Returns: 0 Success + * -1 Failure + * + * Errno: ENOSYS No prealloc service available + * EBADF Bad file descriptor + * EINVAL Not a GPFS file + * EINVAL Not a regular file or directory + * EINVAL Directory pre-allocation not supported + * EINVAL startOffset or bytesToPrealloc < 0 + * EACCES File not opened for writing + * EACCES Caller does not have write access to directory. + * EDQUOT Quota exceeded + * ENOSPC Not enough space on disk + * EPERM File is in a snapshot + */ +int GPFS_API +gpfs_prealloc(gpfs_file_t fileDesc, + gpfs_off64_t startOffset, + gpfs_off64_t bytesToPrealloc); + +/* Directory entries are nominally (assuming compact names of 19 bytes or less) + 32 bytes in size. This conversion factor is used in mapping between a + number of entries (for mmchattr) and a size when calling gpfs_prealloc. */ +#define GPFS_PREALLOC_DIR_SLOT_SIZE 32 /* for size => bytes per entry */ + + +typedef struct gpfs_winattr +{ + gpfs_timestruc_t creationTime; + unsigned int winAttrs; /* values as defined below */ +} gpfs_winattr_t; + +/* winAttrs values */ +#define GPFS_WINATTR_ARCHIVE 0x0001 +#define GPFS_WINATTR_COMPRESSED 0x0002 +#define GPFS_WINATTR_DEVICE 0x0004 +#define GPFS_WINATTR_DIRECTORY 0x0008 +#define GPFS_WINATTR_ENCRYPTED 0x0010 +#define GPFS_WINATTR_HIDDEN 0x0020 +#define GPFS_WINATTR_NORMAL 0x0040 +#define GPFS_WINATTR_NOT_CONTENT_INDEXED 0x0080 +#define GPFS_WINATTR_OFFLINE 0x0100 +#define GPFS_WINATTR_READONLY 0x0200 +#define GPFS_WINATTR_REPARSE_POINT 0x0400 +#define GPFS_WINATTR_SPARSE_FILE 0x0800 +#define GPFS_WINATTR_SYSTEM 0x1000 +#define GPFS_WINATTR_TEMPORARY 0x2000 +#define GPFS_WINATTR_HAS_STREAMS 0x4000 + + +/* NAME: gpfs_get_winattrs() + * gpfs_get_winattrs_path() + * + * FUNCTION: Returns gpfs_winattr_t attributes + * + * Returns: 0 Success + * -1 Failure + * + * Errno: ENOENT file not found + * EBADF Bad file handle, not a GPFS file + * ENOMEM Memory allocation failed + * EACCESS Permission denied + * EFAULT Bad address provided + * EINVAL Not a regular file + * ENOSYS function not available + */ +int GPFS_API +gpfs_get_winattrs(gpfs_file_t fileDesc, gpfs_winattr_t *attrP); + +int GPFS_API +gpfs_get_winattrs_path(const char *pathname, gpfs_winattr_t *attrP); + + +/* NAME: gpfs_set_winattrs() + * gpfs_set_winattrs_path() + * + * FUNCTION: Sets gpfs_winattr_t attributes (as specified by + * the flags). + * + * Returns: 0 Success + * -1 Failure + * + * Errno: ENOENT file not found + * EBADF Bad file handle, not a GPFS file + * ENOMEM Memory allocation failed + * EACCESS Permission denied + * EFAULT Bad address provided + * EINVAL Not a regular file + * ENOSYS function not available + */ +int GPFS_API +gpfs_set_winattrs(gpfs_file_t fileDesc, int flags, gpfs_winattr_t *attrP); + +int GPFS_API +gpfs_set_winattrs_path(const char *pathname, int flags, gpfs_winattr_t *attrP); + +/* gpfs_set_winattr flag values */ +#define GPFS_WINATTR_SET_CREATION_TIME 0x08 +#define GPFS_WINATTR_SET_ATTRS 0x10 + +/* + * NAME: gpfs_set_times(), gpfs_set_times_path() + * + * FUNCTION: Sets file access time, modified time, change time, + * and/or creation time (as specified by the flags). + * + * Input: flagsfileDesc : file descriptor of the object to set + * pathname : path to a file or directory + * flag : define time value to set + * GPFS_SET_ATIME - set access time + * GPFS_SET_MTIME - set mod. time + * GPFS_SET_CTIME - set change time + * GPFS_SET_CREATION_TIME - set creation time + * GPFS_SET_TIME_NO_FOLLOW - don't follow links + * times : array to times + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS function not available + * EBADF Not a GPFS File + * EINVAL invalid argument + * EACCES Permission denied + * EROFS Filesystem is read only + * ENOENT No such file or directory + */ +typedef gpfs_timestruc_t gpfs_times_vector_t[4]; + +int GPFS_API +gpfs_set_times(gpfs_file_t fileDesc, int flags, gpfs_times_vector_t times); + +int GPFS_API +gpfs_set_times_path(char *pathname, int flags, gpfs_times_vector_t times); + +/* gpfs_set_times flag values */ +#define GPFS_SET_ATIME 0x01 +#define GPFS_SET_MTIME 0x02 +#define GPFS_SET_CTIME 0x04 +#define GPFS_SET_CREATION_TIME 0x08 +#define GPFS_SET_TIME_NO_FOLLOW 0x10 + + +/* NAME: gpfs_set_share() + * + * FUNCTION: Acquire shares + * + * Input: fileDesc : file descriptor + * allow : share type being requested + * GPFS_SHARE_NONE, GPFS_SHARE_READ, + * GPFS_SHARE_WRITE, GPFS_SHARE_BOTH + * deny : share type to deny to others + * GPFS_DENY_NONE, GPFS_DENY_READ, + * GPFS_DENY_WRITE, GPFS_DENY_BOTH + * + * Returns: 0 Success + * -1 Failure + * + * Errno: EBADF Bad file handle + * EINVAL Bad argument given + * EFAULT Bad address provided + * ENOMEM Memory allocation failed + * EACCES share mode not available + * ENOSYS function not available + */ + +/* allow/deny specifications */ +#define GPFS_SHARE_NONE 0 +#define GPFS_SHARE_READ 1 +#define GPFS_SHARE_WRITE 2 +#define GPFS_SHARE_BOTH 3 +#define GPFS_SHARE_ALL 3 +#define GPFS_DENY_NONE 0 +#define GPFS_DENY_READ 1 +#define GPFS_DENY_WRITE 2 +#define GPFS_DENY_BOTH 3 +#define GPFS_DENY_DELETE 4 +#define GPFS_DENY_ALL 7 + +int GPFS_API +gpfs_set_share(gpfs_file_t fileDesc, + unsigned int share, + unsigned int deny); + + +/* NAME: gpfs_set_lease() + * + * FUNCTION: Acquire leases for Samba + * + * Input: fileDesc : file descriptor + * leaseType : lease type being requested + * GPFS_LEASE_NONE GPFS_LEASE_READ, + * GPFS_LEASE_WRITE + * + * Returns: 0 Success + * -1 Failure + * + * Errno: EBADF Bad file handle + * EINVAL Bad argument given + * EFAULT Bad address provided + * ENOMEM Memory allocation failed + * EAGAIN lease not available + * EACCES permission denied + * EOPNOTSUPP unsupported leaseType + * ESTALE unmounted file system + * ENOSYS function not available + */ + +/* leaseType specifications */ +#define GPFS_LEASE_NONE 0 +#define GPFS_LEASE_READ 1 +#define GPFS_LEASE_WRITE 2 + +int GPFS_API +gpfs_set_lease(gpfs_file_t fileDesc, + unsigned int leaseType); + + +/* NAME: gpfs_get_lease() + * + * FUNCTION: Returns the type of lease currently held + * + * Returns: GPFS_LEASE_READ + * GPFS_LEASE_WRITE + * GPFS_LEASE_NONE + * + * Returns: >= 0 Success + * -1 Failure + * + * Errno: EINVAL + */ +int GPFS_API +gpfs_get_lease(gpfs_file_t fileDesc); + + + /* NAME: gpfs_get_realfilename(), gpfs_get_realfilename_path() + * + * FUNCTION: Interface to get real name of a file. + * + * INPUT: File descriptor, pathname, buffer, bufferlength + * OUTPUT: Real file name stored in file system + * + * Returns: 0 Success + * -1 Failure + * + * Errno: EBADF Bad file handle + * EINVAL Not a regular file + * EFAULT Bad address provided + * ENOSPC buffer too small to return the real file name. + * Needed size is returned in buflen parameter. + * ENOENT File does not exist + * ENOMEM Memory allocation failed + * EACCESS Permission denied + * ENOSYS function not available + */ +int GPFS_API +gpfs_get_realfilename(gpfs_file_t fileDesc, + char *fileNameP, + int *buflen); + +int GPFS_API +gpfs_get_realfilename_path(const char *pathname, + char *fileNameP, + int *buflen); + + /* NAME: gpfs_ftruncate() + * + * FUNCTION: Interface to truncate a file. + * + * INPUT: File descriptor + * length + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS function not available + * EBADF Bad file handle + * EBADF Not a GPFS file + * EINVAL Not a regular file + * ENOENT File does not exist + * ENOMEM Memory allocation failed + * EINVAL length < 0 + * EACCESS Permission denied + */ +int GPFS_API +gpfs_ftruncate(gpfs_file_t fileDesc, gpfs_off64_t length); + +#define GPFS_WIN_CIFS_REGISTERED 0x02000000 +typedef struct cifsThreadData_t +{ + unsigned int dataLength; /* Total buffer length */ + unsigned int share; /* gpfs_set_share declaration */ + unsigned int deny; /* gpfs_set_share specification */ + unsigned int lease; /* gpfs_set_lease lease type */ + unsigned int secInfoFlags; /* Future use. Must be zero */ + gpfs_uid_t sdUID; /* Owning user */ + gpfs_uid_t sdGID; /* Owning group */ + int shareLocked_fd; /* file descriptor with share locks */ + unsigned int aclLength ; /* Length of the following ACL */ + gpfs_acl_t acl; /* The initial ACL for create/mkdir */ +} cifsThreadData_t; + + /* NAME: gpfs_register_cifs_export() + * + * FUNCTION: Register a CIFS export process. + * + * INPUT: implicit use of the process ids + * + * Returns: 0 Successful + * ENOSYS function not available + * EACCES cannot establish credentials + * ENOMEM temporary shortage of memory + * EINVAL prior process/thread registrations exist + * EBADF unable to allocate a file descriptor + */ +int GPFS_API +gpfs_register_cifs_export(void); + + /* NAME: gpfs_unregister_cifs_export() + * + * FUNCTION: remove a registration for a CIFS export + * + * INPUT: implicit use of the process ids + * + * Returns: 0 Successful + * ENOSYS function not available + * EACCES cannot establish credentials + * ENOMEM temporary shortage of memory + */ +int GPFS_API +gpfs_unregister_cifs_export(void); + + /* NAME: gpfs_register_cifs_buffer() + * + * FUNCTION: Register a CIFS thread/buffer combination + * + * INPUT: implicit use of the process and thread ids + * Address of a cifsThreadData_t structure that will include + * a GPFS ACL (GPFS_ACL_VERSION_NFS4/GPFS_ACL_LEVEL_V4FLAGS) + * that can be applied at file/dir creation. + * + * Returns: 0 Successful + * ENOSYS function not available + * EACCES cannot establish credentials + * ENOMEM unable to allocate required memory + * EINVAL no associated process registrion exists + * bad dataLength in buffer. + */ +int GPFS_API +gpfs_register_cifs_buffer(cifsThreadData_t *bufP); + + /* NAME: gpfs_unregister_cifs_buffer() + * + * FUNCTION: remove a CIFS thread/buffer registration + * + * INPUT: implicit use of the process and thread ids + * + * Returns: 0 Successful + * ENOSYS function not available + * EACCES cannot establish credentials + * ENOMEM unable to allocate required memory + * EINVAL no associated process registrion exists + */ +int GPFS_API +gpfs_unregister_cifs_buffer(void); + +/* NAME: gpfs_lib_init() + * + * FUNCTION: Open GPFS main module device file + * + * INPUT: Flags + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS Function not available + */ +int GPFS_API +gpfs_lib_init(int flags); + +/* NAME: gpfs_lib_term() + * + * FUNCTION: Close GPFS main module device file + * + * INPUT: Flags + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS Function not available + */ +int GPFS_API +gpfs_lib_term(int flags); + +/* Define maximum length of the name for a GPFS named object, such + as a snapshot, storage pool or fileset. The name is a null-terminated + character string, which is not include in the max length */ +#define GPFS_MAXNAMLEN 255 + +/* Define maximum length of the path to a GPFS named object + such as a snapshot or fileset. If the absolute path name exceeds + this limit, then use a relative path name. The path is a null-terminated + character string, which is not included in the max length */ +#define GPFS_MAXPATHLEN 1023 + +/* ASCII code for "GPFS" in the struct statfs f_type field */ +#define GPFS_SUPER_MAGIC 0x47504653 + +/* GPFS inode attributes + gpfs_uid_t - defined above + gpfs_uid64_t - defined above + gpfs_off64_t - defined above + + gpfs_mode_t may include gpfs specific values including 0x02000000 + To have a gpfs_mode_t be equivalent to a mode_t mask that value out. + */ +typedef unsigned int gpfs_mode_t; +typedef unsigned int gpfs_gid_t; +typedef unsigned long long gpfs_gid64_t; +typedef unsigned int gpfs_ino_t; +typedef unsigned long long gpfs_ino64_t; +typedef unsigned int gpfs_gen_t; +typedef unsigned long long gpfs_gen64_t; +typedef unsigned int gpfs_dev_t; +typedef unsigned int gpfs_mask_t; +typedef unsigned int gpfs_pool_t; +typedef unsigned int gpfs_snapid_t; +typedef unsigned long long gpfs_snapid64_t; +typedef unsigned long long gpfs_fsid64_t[2]; +typedef short gpfs_nlink_t; +typedef long long gpfs_nlink64_t; + + +#if defined(WIN32) || defined(_MS_SUA_) + typedef struct gpfs_stat64 + { + gpfs_dev_t st_dev; /* id of device containing file */ + gpfs_ino64_t st_ino; /* file inode number */ + gpfs_mode_t st_mode; /* access mode */ + gpfs_nlink64_t st_nlink; /* number of links */ + unsigned int st_flags; /* flag word */ + gpfs_uid64_t st_uid; /* owner uid */ + gpfs_gid64_t st_gid; /* owner gid */ + gpfs_dev_t st_rdev; /* device id (if special file) */ + gpfs_off64_t st_size; /* file size in bytes */ + gpfs_timestruc64_t st_atime; /* time of last access */ + gpfs_timestruc64_t st_mtime; /* time of last data modification */ + gpfs_timestruc64_t st_ctime; /* time of last status change */ + int st_blksize; /* preferred block size for io */ + gpfs_off64_t st_blocks; /* 512 byte blocks of disk held by file */ + long long st_fsid; /* file system id */ + unsigned int st_type; /* file type */ + gpfs_gen64_t st_gen; /* inode generation number */ + gpfs_timestruc64_t st_createtime; /* time of creation */ + unsigned int st_attrs; /* Windows flags */ + } gpfs_stat64_t; +#else + typedef struct stat64 gpfs_stat64_t; +#endif + +#if defined(WIN32) || defined(_MS_SUA_) + typedef struct gpfs_statfs64 + { + gpfs_off64_t f_blocks; /* total data blocks in file system */ + gpfs_off64_t f_bfree; /* free block in fs */ + gpfs_off64_t f_bavail; /* free blocks avail to non-superuser */ + int f_bsize; /* optimal file system block size */ + gpfs_ino64_t f_files; /* total file nodes in file system */ + gpfs_ino64_t f_ffree; /* free file nodes in fs */ + gpfs_fsid64_t f_fsid; /* file system id */ + int f_fsize; /* fundamental file system block size */ + int f_sector_size; /* logical disk sector size */ + char f_fname[32]; /* file system name (usually mount pt.) */ + char f_fpack[32]; /* file system pack name */ + int f_name_max; /* maximum component name length for posix */ + } gpfs_statfs64_t; +#else + typedef struct statfs64 gpfs_statfs64_t; +#endif + +/* Declarations for backwards compatibility. */ +typedef gpfs_stat64_t stat64_t; +typedef gpfs_statfs64_t statfs64_t; + + +/* Define a version number for the directory entry data to allow + future changes in this structure. Careful callers should also use + the d_reclen field for the size of the structure rather than sizeof, + to allow some degree of forward compatibility */ +#define GPFS_D_VERSION 1 + +typedef struct gpfs_direntx +{ + int d_version; /* this struct's version */ + unsigned short d_reclen; /* actual size of this struct including + null terminated variable length d_name */ + unsigned short d_type; /* Types are defined below */ + gpfs_ino_t d_ino; /* File inode number */ + gpfs_gen_t d_gen; /* Generation number for the inode */ + char d_name[256]; /* null terminated variable length name */ +} gpfs_direntx_t; + + +#define GPFS_D64_VERSION 2 + +typedef struct gpfs_direntx64 +{ + int d_version; /* this struct's version */ + unsigned short d_reclen; /* actual size of this struct including + null terminated variable length d_name */ + unsigned short d_type; /* Types are defined below */ + gpfs_ino64_t d_ino; /* File inode number */ + gpfs_gen64_t d_gen; /* Generation number for the inode */ + unsigned int d_flags; /* Flags are defined below */ + char d_name[1028]; /* null terminated variable length name */ + /* (1020+null+7 byte pad to double word) */ + /* to handle up to 255 UTF-8 chars */ +} gpfs_direntx64_t; + +/* File types for d_type field in gpfs_direntx_t */ +#define GPFS_DE_OTHER 0 +#define GPFS_DE_FIFO 1 +#define GPFS_DE_CHR 2 +#define GPFS_DE_DIR 4 +#define GPFS_DE_BLK 6 +#define GPFS_DE_REG 8 +#define GPFS_DE_LNK 10 +#define GPFS_DE_SOCK 12 +#define GPFS_DE_DEL 16 + +/* Define flags for gpfs_direntx64_t */ +#define GPFS_DEFLAG_NONE 0x0000 /* Default value, no flags set */ +#define GPFS_DEFLAG_JUNCTION 0x0001 /* DirEnt is a fileset junction */ +#define GPFS_DEFLAG_IJUNCTION 0x0002 /* DirEnt is a inode space junction */ +#define GPFS_DEFLAG_ORPHAN 0x0004 /* DirEnt is an orphan (pcache) */ +#define GPFS_DEFLAG_CLONE 0x0008 /* DirEnt is a clone child */ + +/* Define a version number for the iattr data to allow future changes + in this structure. Careful callers should also use the ia_reclen field + for the size of the structure rather than sizeof, to allow some degree + of forward compatibility */ +#define GPFS_IA_VERSION 1 +#define GPFS_IA64_VERSION 3 /* ver 3 adds ia_repl_xxxx bytes instead of ia_pad2 */ +#define GPFS_IA64_RESERVED 4 +#define GPFS_IA64_UNUSED 8 + +typedef struct gpfs_iattr +{ + int ia_version; /* this struct version */ + int ia_reclen; /* sizeof this structure */ + int ia_checksum; /* validity check on iattr struct */ + gpfs_mode_t ia_mode; /* access mode; see gpfs_mode_t comment */ + gpfs_uid_t ia_uid; /* owner uid */ + gpfs_gid_t ia_gid; /* owner gid */ + gpfs_ino_t ia_inode; /* file inode number */ + gpfs_gen_t ia_gen; /* inode generation number */ + gpfs_nlink_t ia_nlink; /* number of links */ + short ia_flags; /* Flags (defined below) */ + int ia_blocksize; /* preferred block size for io */ + gpfs_mask_t ia_mask; /* Initial attribute mask (not used) */ + unsigned int ia_pad1; /* reserved space */ + gpfs_off64_t ia_size; /* file size in bytes */ + gpfs_off64_t ia_blocks; /* 512 byte blocks of disk held by file */ + gpfs_timestruc_t ia_atime; /* time of last access */ + gpfs_timestruc_t ia_mtime; /* time of last data modification */ + gpfs_timestruc_t ia_ctime; /* time of last status change */ + gpfs_dev_t ia_rdev; /* id of device */ + unsigned int ia_xperm; /* extended attributes (defined below) */ + unsigned int ia_modsnapid; /* snapshot id of last modification */ + unsigned int ia_filesetid; /* fileset ID */ + unsigned int ia_datapoolid; /* storage pool ID for data */ + unsigned int ia_pad2; /* reserved space */ +} gpfs_iattr_t; + + +typedef struct gpfs_iattr64 +{ + int ia_version; /* this struct version */ + int ia_reclen; /* sizeof this structure */ + int ia_checksum; /* validity check on iattr struct */ + gpfs_mode_t ia_mode; /* access mode; see gpfs_mode_t comment */ + gpfs_uid64_t ia_uid; /* owner uid */ + gpfs_gid64_t ia_gid; /* owner gid */ + gpfs_ino64_t ia_inode; /* file inode number */ + gpfs_gen64_t ia_gen; /* inode generation number */ + gpfs_nlink64_t ia_nlink; /* number of links */ + gpfs_off64_t ia_size; /* file size in bytes */ + gpfs_off64_t ia_blocks; /* 512 byte blocks of disk held by file */ + gpfs_timestruc64_t ia_atime; /* time of last access */ + unsigned int ia_winflags; /* windows flags (defined below) */ + unsigned int ia_pad1; /* reserved space */ + gpfs_timestruc64_t ia_mtime; /* time of last data modification */ + unsigned int ia_flags; /* flags (defined below) */ + /* next four bytes were ia_pad2 */ + unsigned char ia_repl_data; /* data replication factor */ + unsigned char ia_repl_data_max; /* data replication max factor */ + unsigned char ia_repl_meta; /* meta data replication factor */ + unsigned char ia_repl_meta_max; /* meta data replication max factor */ + gpfs_timestruc64_t ia_ctime; /* time of last status change */ + int ia_blocksize; /* preferred block size for io */ + unsigned int ia_pad3; /* reserved space */ + gpfs_timestruc64_t ia_createtime; /* creation time */ + gpfs_mask_t ia_mask; /* initial attribute mask (not used) */ + int ia_pad4; /* reserved space */ + unsigned int ia_reserved[GPFS_IA64_RESERVED]; /* reserved space */ + unsigned int ia_xperm; /* extended attributes (defined below) */ + gpfs_dev_t ia_dev; /* id of device containing file */ + gpfs_dev_t ia_rdev; /* device id (if special file) */ + unsigned int ia_pcacheflags; /* pcache inode bits */ + gpfs_snapid64_t ia_modsnapid; /* snapshot id of last modification */ + unsigned int ia_filesetid; /* fileset ID */ + unsigned int ia_datapoolid; /* storage pool ID for data */ + gpfs_ino64_t ia_inode_space_mask; /* inode space mask of this file system */ + /* This value is saved in the iattr structure + during backup and used during restore */ + gpfs_off64_t ia_dirminsize; /* dir pre-allocation size in bytes */ + unsigned int ia_unused[GPFS_IA64_UNUSED]; /* reserved space */ +} gpfs_iattr64_t; + +/* Define flags for inode attributes */ +#define GPFS_IAFLAG_SNAPDIR 0x0001 /* (obsolete) */ +#define GPFS_IAFLAG_USRQUOTA 0x0002 /* inode is a user quota file */ +#define GPFS_IAFLAG_GRPQUOTA 0x0004 /* inode is a group quota file */ +#define GPFS_IAFLAG_ERROR 0x0008 /* error reading inode */ +/* Define flags for inode replication attributes */ +#define GPFS_IAFLAG_FILESET_ROOT 0x0010 /* root dir of a fileset */ +#define GPFS_IAFLAG_NO_SNAP_RESTORE 0x0020 /* don't restore from snapshots */ +#define GPFS_IAFLAG_FILESETQUOTA 0x0040 /* inode is a fileset quota file */ +#define GPFS_IAFLAG_COMANAGED 0x0080 /* file data is co-managed */ +#define GPFS_IAFLAG_ILLPLACED 0x0100 /* may not be properly placed */ +#define GPFS_IAFLAG_REPLMETA 0x0200 /* metadata replication set */ +#define GPFS_IAFLAG_REPLDATA 0x0400 /* data replication set */ +#define GPFS_IAFLAG_EXPOSED 0x0800 /* may have data on suspended disks */ +#define GPFS_IAFLAG_ILLREPLICATED 0x1000 /* may not be properly replicated */ +#define GPFS_IAFLAG_UNBALANCED 0x2000 /* may not be properly balanced */ +#define GPFS_IAFLAG_DATAUPDATEMISS 0x4000 /* has stale data blocks on + unavailable disk */ +#define GPFS_IAFLAG_METAUPDATEMISS 0x8000 /* has stale metadata on + unavailable disk */ + +#define GPFS_IAFLAG_IMMUTABLE 0x00010000 /* Immutability */ +#define GPFS_IAFLAG_INDEFRETENT 0x00020000 /* Indefinite retention */ +#define GPFS_IAFLAG_SECUREDELETE 0x00040000 /* Secure deletion */ + +#define GPFS_IAFLAG_TRUNCMANAGED 0x00080000 /* dmapi truncate event enabled */ +#define GPFS_IAFLAG_READMANAGED 0x00100000 /* dmapi read event enabled */ +#define GPFS_IAFLAG_WRITEMANAGED 0x00200000 /* dmapi write event enabled */ + +#define GPFS_IAFLAG_APPENDONLY 0x00400000 /* AppendOnly only */ +#define GPFS_IAFLAG_DELETED 0x00800000 /* inode has been deleted */ +#ifdef ZIP +#define GPFS_IAFLAG_ILLCOMPRESSED 0x01000000 /* may not be properly compressed */ +#endif +#define GPFS_IAFLAG_FPOILLPLACED 0x02000000 /* may not be properly placed per + FPO attributes (bgf, wad, wadfg) */ + +/* Define flags for window's attributes */ +#define GPFS_IWINFLAG_ARCHIVE 0x0001 /* Archive */ +#define GPFS_IWINFLAG_HIDDEN 0x0002 /* Hidden */ +#define GPFS_IWINFLAG_NOTINDEXED 0x0004 /* Not content indexed */ +#define GPFS_IWINFLAG_OFFLINE 0x0008 /* Off-line */ +#define GPFS_IWINFLAG_READONLY 0x0010 /* Read-only */ +#define GPFS_IWINFLAG_REPARSE 0x0020 /* Reparse point */ +#define GPFS_IWINFLAG_SYSTEM 0x0040 /* System */ +#define GPFS_IWINFLAG_TEMPORARY 0x0080 /* Temporary */ +#define GPFS_IWINFLAG_COMPRESSED 0x0100 /* Compressed */ +#define GPFS_IWINFLAG_ENCRYPTED 0x0200 /* Encrypted */ +#define GPFS_IWINFLAG_SPARSE 0x0400 /* Sparse file */ +#define GPFS_IWINFLAG_HASSTREAMS 0x0800 /* Has streams */ + +/* Define flags for extended attributes */ +#define GPFS_IAXPERM_ACL 0x0001 /* file has acls */ +#define GPFS_IAXPERM_XATTR 0x0002 /* file has extended attributes */ +#define GPFS_IAXPERM_DMATTR 0x0004 /* file has dm attributes */ +#define GPFS_IAXPERM_DOSATTR 0x0008 /* file has non-default dos attrs */ +#define GPFS_IAXPERM_RPATTR 0x0010 /* file has restore policy attrs */ + +/* Define flags for pcache bits defined in the inode */ +#define GPFS_ICAFLAG_CACHED 0x0001 /* "cached complete" */ +#define GPFS_ICAFLAG_CREATE 0x0002 /* "created" */ +#define GPFS_ICAFLAG_DIRTY 0x0004 /* "data dirty" */ +#define GPFS_ICAFLAG_LINK 0x0008 /* "hard linked" */ +#define GPFS_ICAFLAG_SETATTR 0x0010 /* "attr changed" */ +#define GPFS_ICAFLAG_LOCAL 0x0020 /* "local" */ +#define GPFS_ICAFLAG_APPEND 0x0040 /* "append" */ +#define GPFS_ICAFLAG_STATE 0x0080 /* "has remote state" */ + +/* Define pointers to interface types */ +typedef struct gpfs_fssnap_handle gpfs_fssnap_handle_t; +typedef struct gpfs_iscan gpfs_iscan_t; +typedef struct gpfs_ifile gpfs_ifile_t; +typedef struct gpfs_restore gpfs_restore_t; + +typedef struct gpfs_fssnap_id +{ + char opaque[48]; +} gpfs_fssnap_id_t; + + +/* Define extended return codes for gpfs backup & restore + calls without an explicit return code will return the value in errno */ +#define GPFS_NEW_ERRNO_BASE 185 +#define GPFS_E_INVAL_INUM (GPFS_NEW_ERRNO_BASE+0) /* invalid inode number */ + +#define GPFS_ERRNO_BASE 190 +#define GPFS_E_INVAL_FSSNAPID (GPFS_ERRNO_BASE+0) /* invalid fssnap id */ +#define GPFS_E_INVAL_ISCAN (GPFS_ERRNO_BASE+1) /* invalid iscan pointer */ +#define GPFS_E_INVAL_IFILE (GPFS_ERRNO_BASE+2) /* invalid ifile pointer */ +#define GPFS_E_INVAL_IATTR (GPFS_ERRNO_BASE+3) /* invalid iattr structure */ +#define GPFS_E_INVAL_RESTORE (GPFS_ERRNO_BASE+4) /* invalid restore pointer */ +#define GPFS_E_INVAL_FSSNAPHANDLE (GPFS_ERRNO_BASE+5) /* invalid fssnap handle */ +#define GPFS_E_INVAL_SNAPNAME (GPFS_ERRNO_BASE+6) /* invalid snapshot name */ +#define GPFS_E_FS_NOT_RESTORABLE (GPFS_ERRNO_BASE+7) /* FS is not clean */ +#define GPFS_E_RESTORE_NOT_ENABLED (GPFS_ERRNO_BASE+8) /* Restore was not enabled */ +#define GPFS_E_RESTORE_STARTED (GPFS_ERRNO_BASE+9) /* Restore is running */ +#define GPFS_E_INVAL_XATTR (GPFS_ERRNO_BASE+10) /* invalid extended + attribute pointer */ + +/* Define flags parameter for get/put file attributes. + Used by gpfs_fgetattr, gpfs_fputattr, gpfs_fputattrwithpath + gpfs_igetattrsx, gpfs_iputattrsx + and gpfs_lwe_getattrs, gpfs_lwe_putattrs +*/ +#define GPFS_ATTRFLAG_DEFAULT 0x0000 /* default behavior */ +#define GPFS_ATTRFLAG_NO_PLACEMENT 0x0001 /* exclude file placement attributes */ +#define GPFS_ATTRFLAG_IGNORE_POOL 0x0002 /* saved poolid is not valid */ +#define GPFS_ATTRFLAG_USE_POLICY 0x0004 /* use restore policy rules to + determine poolid */ +#define GPFS_ATTRFLAG_INCL_DMAPI 0x0008 /* Include dmapi attributes */ +#define GPFS_ATTRFLAG_FINALIZE_ATTRS 0x0010 /* Finalize immutability attributes */ +#define GPFS_ATTRFLAG_SKIP_IMMUTABLE 0x0020 /* Skip immutable attributes */ +#define GPFS_ATTRFLAG_INCL_ENCR 0x0040 /* Include encryption attributes */ +#define GPFS_ATTRFLAG_SKIP_CLONE 0x0080 /* Skip clone attributes */ +#define GPFS_ATTRFLAG_MODIFY_CLONEPARENT 0x0100 /* Allow modification on clone parent */ +#ifdef ZIP +#define GPFS_ATTRFLAG_NO_COMPRESSED 0x0200 /* exclude "compressed" attribute */ +#endif + +/* Define structure used by gpfs_statfspool */ +typedef struct gpfs_statfspool_s +{ + gpfs_off64_t f_blocks; /* total data blocks in pool */ + gpfs_off64_t f_bfree; /* free blocks in pool */ + gpfs_off64_t f_bavail; /* free blocks avail to non-superuser */ + gpfs_off64_t f_mblocks; /* total metadata blocks in pool */ + gpfs_off64_t f_mfree; /* free blocks avail for system metadata */ + int f_bsize; /* optimal storage pool block size */ + int f_files; /* total file nodes assigned to pool */ + gpfs_pool_t f_poolid; /* storage pool id */ + int f_fsize; /* fundamental file system block size */ + unsigned int f_usage; /* data and/or metadata stored in pool */ + int f_replica; /* replica */ + int f_bgf; /* block group factor */ + int f_wad; /* write affinity depth */ + int f_allowWriteAffinity; /* allow write affinity depth. 1 means yes */ + int f_reserved[3];/* Current unused and set to zero */ +} gpfs_statfspool_t; + +#define STATFSPOOL_USAGE_DATA 0x0001 /* Pool stores user data */ +#define STATFSPOOL_USAGE_METADATA 0x0002 /* Pool stores system metadata */ + + +/* NAME: gpfs_fstat(), gpfs_stat() + * + * FUNCTION: Get exact stat information for a file descriptor (or filename). + * Forces all other nodes to flush dirty data and metadata to disk. + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS The gpfs_fstat() (or) gpfs_stat() subroutine is not supported + * under the current file system format + * EBADF The file descriptor is not valid. + * EINVAL The file descriptor does not refer to a GPFS file or a + * regular file. + * ESTALE The cached file system information was not valid. + */ +int GPFS_API +gpfs_fstat(gpfs_file_t fileDesc, + gpfs_stat64_t *buffer); + +int GPFS_API +gpfs_stat(const char *pathname, /* File pathname */ + gpfs_stat64_t *buffer); + +/* NAME: gpfs_fstat_x(), gpfs_stat_x() + * + * FUNCTION: Returns extended stat() information with specified accuracy + * for a file descriptor (or filename) + * + * Input: fileDesc : file descriptor or handle + * pathname : path to a file or directory + * iattrBufLen : length of iattr buffer + * + * In/Out: st_litemaskP: bitmask specification of required accuracy + * iattr : buffer for returned stat information + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS function not available + * ENOENT invalid pathname + * EBADF Bad file desc + * EINVAL Not a GPFS file + * ESTALE cached fs information was invalid + */ +int GPFS_API +gpfs_fstat_x(gpfs_file_t fileDesc, + unsigned int *st_litemaskP, + gpfs_iattr64_t *iattr, + size_t iattrBufLen); + +int GPFS_API +gpfs_stat_x(const char *pathname, /* File pathname */ + unsigned int *st_litemaskP, + gpfs_iattr64_t *iattr, + size_t iattrBufLen); + +/* NAME: gpfs_statfs64() + * + * FUNCTION: Get information about the file system. + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS function not available + * EBADF Bad file desc + * EINVAL Not a GPFS file + * ESTALE cached fs information was invalid + */ +int GPFS_API +gpfs_statfs64(const char *pathname, /* File pathname */ + gpfs_statfs64_t *buffer); + +/* NAME: gpfs_statlite() + * gpfs_lstatlite() - do not follow a symlink at the end of the path + * + * FUNCTION: Returns stat() information with specified accuracy + * + * Input: pathname : path to a file or directory + * + * In/Out: st_litemaskP: bitmask specification of required accuracy + * statbufP : buffer for returned stat information + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: Specific error indication + * EINVAL + * + */ +int GPFS_API +gpfs_statlite(const char *pathname, + unsigned int *st_litemaskP, + gpfs_stat64_t *statbufP); + +int GPFS_API +gpfs_lstatlite(const char *pathname, + unsigned int *st_litemaskP, + gpfs_stat64_t *statbufP); + + +/* NAME: gpfs_fgetattrs() + * + * FUNCTION: Retrieves all extended file attributes in opaque format. + * This function together with gpfs_fputattrs is intended for + * use by a backup program to save (gpfs_fgetattrs) and + * restore (gpfs_fputattrs) all extended file attributes + * (ACLs, user attributes, ...) in one call. + * + * NOTE: This call does not return extended attributes used for + * the Data Storage Management (XDSM) API (aka DMAPI). + * + * Input: flags Define behavior of get attributes + * GPFS_ATTRFLAG_NO_PLACEMENT - file attributes for placement + * are not saved, neither is the current storage pool. + * GPFS_ATTRFLAG_IGNORE_POOL - file attributes for placement + * are saved, but the current storage pool is not. + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS function not available + * EINVAL Not a GPFS file + * EINVAL invalid flags provided + * ENOSPC buffer too small to return all attributes + * *attrSizeP will be set to the size necessary + */ +int GPFS_API +gpfs_fgetattrs(gpfs_file_t fileDesc, + int flags, + void *bufferP, + int bufferSize, + int *attrSizeP); + + +/* NAME: gpfs_fputattrs() + * + * FUNCTION: Sets all extended file attributes of a file + * and sets the file's storage pool and data replication + * to the values saved in the extended attributes. + * + * If the saved storage pool is not valid or if the IGNORE_POOL + * flag is set, then it will select the storage pool by matching + * a PLACEMENT rule using the saved file attributes. + * If it fails to match a placement rule or if there are + * no placement rules installed it will assign the file + * to the "system" storage pool. + * + * The buffer passed in should contain extended attribute data + * that was obtained by a previous call to gpfs_fgetattrs. + * + * Input: flags Define behavior of put attributes + * GPFS_ATTRFLAG_NO_PLACEMENT - file attributes are restored + * but the storage pool and data replication are unchanged + * GPFS_ATTRFLAG_IGNORE_POOL - file attributes are restored + * but the storage pool and data replication are selected + * by matching the saved attributes to a placement rule + * instead of restoring the saved storage pool. + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS function not available + * EINVAL Not a GPFS file + * EINVAL the buffer does not contain valid attribute data + * EINVAL invalid flags provided + */ +int GPFS_API +gpfs_fputattrs(gpfs_file_t fileDesc, + int flags, + void *bufferP); + + +/* NAME: gpfs_fputattrswithpathname() + * + * FUNCTION: Sets all extended file attributes of a file and invokes + * the policy engine to match a RESTORE rule using the file's + * attributes saved in the extended attributes to set the + * file's storage pool and data replication. The caller should + * include the full path to the file, including the file name, + * to allow rule selection based on file name or path. + * + * If the file fails to match a RESTORE rule, or if there are + * no RESTORE rules installed, then the storage pool and data + * replication are selected as when calling gpfs_fputattrs(). + * + * The buffer passed in should contain extended attribute data + * that was obtained by a previous call to gpfs_fgetattrs. + * + * pathName is a UTF-8 encoded string. On Windows, applications + * can convert UTF-16 ("Unicode") to UTF-8 using the platforms + * WideCharToMultiByte function. + * + * + * Input: flags Define behavior of put attributes + * GPFS_ATTRFLAG_NO_PLACEMENT - file attributes are restored + * but the storage pool and data replication are unchanged + * GPFS_ATTRFLAG_IGNORE_POOL - file attributes are restored + * but if the file fails to match a RESTORE rule, it + * ignore the saved storage pool and select a pool + * by matching the saved attributes to a PLACEMENT rule. + * GPFS_ATTRFLAG_SKIP_IMMUTABLE - Skip immutable/appendOnly flags + * before restoring file data. Then use GPFS_ATTRFLAG_FINALIZE_ATTRS + * to restore immutable/appendOnly flags after data is restored. + * GPFS_ATTRFLAG_FINALIZE_ATTRS - file attributes that are restored + * after data is retored. If file is immutable/appendOnly + * call without this flag before restoring data + * then call with this flag after restoring data + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS function not available + * EINVAL Not a GPFS file + * EINVAL the buffer does not contain valid attribute data + * ENOENT invalid pathname + * EINVAL invalid flags provided + */ +int GPFS_API +gpfs_fputattrswithpathname(gpfs_file_t fileDesc, + int flags, + void *bufferP, + const char *pathName); + + +/* NAME: gpfs_get_fssnaphandle_by_path() + * + * FUNCTION: Get a volatile handle to uniquely identify a file system + * and snapshot by the path to the file system and snapshot + * + * Input: pathName: path to a file or directory in a gpfs file system + * or to one of its snapshots + * + * Returns: pointer to gpfs_fssnap_handle_t (Successful) + * NULL and errno is set (Failure) + * + * Errno: ENOSYS function not available + * EINVAL Not a GPFS file + * ENOENT invalid pathname + * see system calls open(), fstatfs(), and malloc() ERRORS + */ +gpfs_fssnap_handle_t * GPFS_API +gpfs_get_fssnaphandle_by_path(const char *pathName); + + +/* NAME: gpfs_get_fssnaphandle_by_name() + * + * FUNCTION: Get a volatile handle to uniquely identify a file system + * and snapshot by the file system name and snapshot name. + * + * Input: fsName: unique name for gpfs file system (may be specified + * as fsName or /dev/fsName) + * snapName: name for snapshot within that file system + * or NULL to access the active file system rather + * than a snapshot within the file system. + * + * Returns: pointer to gpfs_fssnap_handle_t (Successful) + * NULL and errno is set (Failure) + * + * Errno: ENOSYS function not available + * ENOENT invalid file system name + * GPFS_E_INVAL_SNAPNAME invalid snapshot name + * see system calls open(), fstatfs(), and malloc() ERRORS + */ +gpfs_fssnap_handle_t * GPFS_API +gpfs_get_fssnaphandle_by_name(const char *fsName, + const char *snapName); + + +/* NAME: gpfs_get_fssnaphandle_by_fssnapid() + * + * FUNCTION: Get a volatile handle to uniquely identify a file system + * and snapshot by a fssnapId created from a previous handle. + * + * Input: fssnapId: unique id for a file system and snapshot + * + * Returns: pointer to gpfs_fssnap_handle_t (Successful) + * NULL and errno is set (Failure) + * + * Errno: ENOSYS function not available + * GPFS_E_INVAL_FSSNAPID invalid snapshot id + * see system calls open(), fstatfs(), and malloc() ERRORS + */ +gpfs_fssnap_handle_t * GPFS_API +gpfs_get_fssnaphandle_by_fssnapid(const gpfs_fssnap_id_t *fssnapId); + +/* NAME: gpfs_get_fset_snaphandle_by_path() + * + * FUNCTION: Get a volatile handle to uniquely identify an inode space within a + * filesyetsm and snapshot by the path to the file system and snapshot. + * + * Input: pathName: path to a file or directory in a gpfs file system + * or to one of its snapshots + * + * Returns: pointer to gpfs_fssnap_handle_t (Successful) + * NULL and errno is set (Failure) + * + * Errno: ENOSYS function not available + * EINVAL Not a GPFS file + * ENOENT invalid pathname + * see system calls open(), fstatfs(), and malloc() ERRORS + */ +gpfs_fssnap_handle_t * GPFS_API +gpfs_get_fset_snaphandle_by_path(const char *pathName); + +/* NAME: gpfs_get_fset_snaphandle_by_name() + * + * FUNCTION: Get a volatile handle to uniquely identify an inode space within a + * file system and snapshot by the independent fileset name, file system + * name and snapshot name. + * + * Input: fsName: unique name for gpfs file system (may be specified + * as fsName or /dev/fsName) + * fsetName name of the independent fileset that owns the inode space + * snapName: name for snapshot within that file system + * or NULL to access the active file system rather + * than a snapshot within the file system. + * + * Returns: pointer to gpfs_fssnap_handle_t (Successful) + * NULL and errno is set (Failure) + * + * Errno: ENOSYS function not available + * ENOENT invalid file system name + * GPFS_E_INVAL_FSETNAME invalid fset nsmae + * GPFS_E_INVAL_SNAPNAME invalid snapshot name + * see system calls open(), fstatfs(), and malloc() ERRORS + */ +gpfs_fssnap_handle_t * GPFS_API +gpfs_get_fset_snaphandle_by_name(const char *fsName, + const char *fsetName, + const char *snapName); + +/* NAME: gpfs_get_fset_snaphandle_by_fset_snapid() + * + * FUNCTION: Get a volatile handle to uniquely identify a file system + * and snapshot by a fssnapId created from a previous handle. + * + * Input: fssnapId: unique id for a file system and snapshot + * + * Returns: pointer to gpfs_fssnap_handle_t (Successful) + * NULL and errno is set (Failure) + * + * Errno: ENOSYS function not available + * GPFS_E_INVAL_FSSNAPID invalid snapshot id + * see system calls open(), fstatfs(), and malloc() ERRORS + */ +gpfs_fssnap_handle_t * GPFS_API +gpfs_get_fset_snaphandle_by_fset_snapid(const gpfs_fssnap_id_t *fsetsnapId); + +/* NAME: gpfs_get_pathname_from_fssnaphandle() + * + * FUNCTION: Get the mountpoint and path to a file system + * and snapshot identified by a fssnapHandle + * + * Input: fssnapHandle: ptr to file system & snapshot handle + * + * Returns: ptr to path name to the file system (Successful) + * NULL and errno is set (Failure) + * + * Errno: ENOSYS function not available + * GPFS_E_INVAL_FSSNAPHANDLE invalid fssnapHandle + */ +const char * GPFS_API +gpfs_get_pathname_from_fssnaphandle(gpfs_fssnap_handle_t *fssnapHandle); + + +/* NAME: gpfs_get_fsname_from_fssnaphandle() + * + * FUNCTION: Get the unique name for the file system + * identified by a fssnapHandle + * + * Input: fssnapHandle: ptr to file system & snapshot handle + * + * Returns: ptr to name of the file system (Successful) + * NULL and errno is set (Failure) + * + * Errno: ENOSYS function not available + * GPFS_E_INVAL_FSSNAPHANDLE invalid fssnapHandle + */ +const char * GPFS_API +gpfs_get_fsname_from_fssnaphandle(gpfs_fssnap_handle_t *fssnapHandle); + + +/* NAME: gpfs_get_snapname_from_fssnaphandle() + * + * FUNCTION: Get the name for the snapshot + * uniquely identified by a fssnapHandle + * + * Input: fssnapHandle: ptr to file system & snapshot handle + * + * Returns: ptr to name assigned to the snapshot (Successful) + * NULL and errno is set (Failure) + * + * Errno: ENOSYS function not available + * GPFS_E_INVAL_FSSNAPHANDLE invalid fssnaphandle + * GPFS_E_INVAL_SNAPNAME snapshot has been deleted + * + * Notes: If the snapshot has been deleted from the file system + * the snapId may still be valid, but the call will fail + * with errno set to GPFS_E_INVAL_SNAPNAME. + */ +const char * GPFS_API +gpfs_get_snapname_from_fssnaphandle(gpfs_fssnap_handle_t *fssnapHandle); + + +/* NAME: gpfs_get_snapid_from_fssnaphandle() + * + * FUNCTION: Get the numeric id for the snapshot identified + * by a fssnapHandle. The snapshots define an ordered + * sequence of changes to each file. The file's iattr + * structure defines the snapshot id in which the file + * was last modified (ia_modsnapid). This numeric value + * can be compared to the numeric snapid from a fssnaphandle + * to determine if the file changed before or after the + * snapshot identified by the fssnaphandle. + * + * Input: fssnapHandle: ptr to file system & snapshot handle + * + * Returns: Numeric id for the snapshot referred to by the fssnaphandle + * 0 if the fssnaphandle does not refer to a snapshot + * -1 and errno is set (Failure) + * + * Errno: ENOSYS function not available + * GPFS_E_INVAL_FSSNAPHANDLE invalid fssnaphandle + * + * Notes: The snapshot need not be on-line to determine the + * snapshot's numeric id. + */ +gpfs_snapid_t GPFS_API +gpfs_get_snapid_from_fssnaphandle(gpfs_fssnap_handle_t *fssnapHandle); + +gpfs_snapid64_t GPFS_API +gpfs_get_snapid_from_fssnaphandle64(gpfs_fssnap_handle_t *fssnapHandle); + + +/* NAME: gpfs_get_fssnapid_from_fssnaphandle() + * + * FUNCTION: Get a unique, non-volatile file system and snapshot id + * for the file system and snapshot identified by a + * volatile fssnap handle. + * + * Input: fssnapHandle: ptr to file system & snapshot handle + * fssnapId: returned fssnapId uniquely identifying the + * file system and snapshot being scanned + * + * Returns: 0 and fssnapId is set with id (Successful) + * -1 and errno is set (Failure) + * + * Errno: GPFS_E_INVAL_FSSNAPHANDLE invalid fssnaphandle + * EINVAL null ptr given for returned fssnapId + * EFAULT size mismatch for fssnapId + */ +int GPFS_API +gpfs_get_fssnapid_from_fssnaphandle(gpfs_fssnap_handle_t *fssnapHandle, + gpfs_fssnap_id_t *fssnapId); + + +/* NAME: gpfs_get_restore_fssnapid_from_fssnaphandle() + * + * FUNCTION: Get the unique, non-volatile file system and snapshot id + * used for the last complete restore of a mirrored file + * system. The file system must been a previous restore + * target and ready for additional incremental restore. + * + * Input: fssnapHandle: ptr to file system & snapshot handle + * fssnapId: returned fssnapId uniquely identifying the + * last complete restored file system. + * + * Returns: 0 and fssnapId is set with id (Successful) + * -1 and errno is set (Failure) + * + * Errno: GPFS_E_INVAL_FSSNAPHANDLE invalid fssnaphandle + * EINVAL null ptr given for returned fssnapId + * EFAULT size mismatch for fssnapId + * EPERM caller must have superuser privilege + * ENOMEM unable to allocate memory for request + * GPFS_E_FS_NOT_RESTORABLE fs is not clean for restore + */ +int GPFS_API +gpfs_get_restore_fssnapid_from_fssnaphandle(gpfs_fssnap_handle_t *fssnapHandle, + gpfs_fssnap_id_t *fssnapId); + +/* NAME: gpfs_free_fssnaphandle() + * + * FUNCTION: Free a fssnapHandle + * + * Input: fssnapHandle: ptr to file system & snapshot handle + * + * Returns: void + * + * Errno: None + */ +void GPFS_API +gpfs_free_fssnaphandle(gpfs_fssnap_handle_t *fssnapHandle); + +/* NAME: gpfs_get_snapdirname() + * + * FUNCTION: Get the name of the directory containing snapshots. + * + * Input: fssnapHandle: handle for the file system + * snapdirName: buffer into which the name of the snapshot + * directory will be copied + * bufLen: the size of the provided buffer + * + * Returns: 0 (Successful) + * -1 and errno is set (Failure) + * + * Errno: ENOSYS function not available + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * ENOMEM unable to allocate memory for request + * GPFS_E_INVAL_FSSNAPHANDLE fssnapHandle is invalid + * E2BIG buffer too small to return the snapshot directory name + */ +int GPFS_API +gpfs_get_snapdirname(gpfs_fssnap_handle_t *fssnapHandle, + char *snapdirName, + int bufLen); + + +/* NAME: gpfs_open_inodescan() + * + * FUNCTION: Open inode file for inode scan. + * + * Input: fssnapHandle: handle for file system and snapshot + * to be scanned + * prev_fssnapId: + * if NULL, all inodes of existing file will be returned; + * if non-null, only returns inodes of files that have changed + * since the specified previous snapshot; + * if specifies the same snapshot as the one referred by + * fssnapHandle, only the snapshot inodes that have been + * copied into this snap inode file are returned; + * maxIno: if non-null, returns the maximum inode number + * available in the inode file being scanned. + * + * Returns: pointer to gpfs_iscan_t (Successful) + * NULL and errno is set (Failure) + * + * Errno: ENOSYS function not available + * EINVAL bad parameters + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * ENOMEM unable to allocate memory for request + * GPFS_E_INVAL_FSSNAPHANDLE fssnapHandle is invalid + * GPFS_E_INVAL_FSSNAPID prev_fssnapId is invalid + * EDOM prev_fssnapId is from a different fs + * ERANGE prev_fssnapId is more recent than snapId + * being scanned + * see system calls dup() and malloc() ERRORS + */ +gpfs_iscan_t * GPFS_API +gpfs_open_inodescan(gpfs_fssnap_handle_t *fssnapHandle, + const gpfs_fssnap_id_t *prev_fssnapId, + gpfs_ino_t *maxIno); + +gpfs_iscan_t * GPFS_API +gpfs_open_inodescan64(gpfs_fssnap_handle_t *fssnapHandle, + const gpfs_fssnap_id_t *prev_fssnapId, + gpfs_ino64_t *maxIno); + + +/* NAME: gpfs_open_inodescan_with_xattrs() + * + * FUNCTION: Open inode file and extended attributes for an inode scan + * + * Input: fssnapHandle: handle for file system and snapshot + * to be scanned + * prev_fssnapId: if NULL, all inodes of existing file will + * be returned; if non-null, only returns inodes of files + * that have changed since the specified previous snapshot; + * if specifies the same snapshot as the one referred by + * fssnapHandle, only the snapshot inodes that have been + * copied into this snap inode file are returned; + * nxAttrs: count of extended attributes to be returned. + * if nxAttrs is set to 0, call returns no extended + * attributes, like gpfs_open_inodescan. + * if nxAttrs is set to -1, call returns all extended attributes + * xAttrList: pointer to array of pointers to names of extended + * attribute to be returned. nxAttrList may be null if nxAttrs + * is set to 0 or -1. + * maxIno: if non-null, returns the maximum inode number + * available in the inode file being scanned. + * + * Returns: pointer to gpfs_iscan_t (Successful) + * NULL and errno is set (Failure) + * + * Errno: ENOSYS function not available + * EINVAL bad parameters + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * ENOMEM unable to allocate memory for request + * GPFS_E_INVAL_FSSNAPHANDLE fssnapHandle is invalid + * GPFS_E_INVAL_FSSNAPID prev_fssnapId is invalid + * EDOM prev_fssnapId is from a different fs + * ERANGE prev_fssnapId is more recent than snapId + * being scanned + * see system calls dup() and malloc() ERRORS + */ +gpfs_iscan_t * GPFS_API +gpfs_open_inodescan_with_xattrs(gpfs_fssnap_handle_t *fssnapHandle, + const gpfs_fssnap_id_t *prev_fssnapId, + int nxAttrs, + const char *xattrsList[], + gpfs_ino_t *maxIno); + +gpfs_iscan_t * GPFS_API +gpfs_open_inodescan_with_xattrs64(gpfs_fssnap_handle_t *fssnapHandle, + const gpfs_fssnap_id_t *prev_fssnapId, + int nxAttrs, + const char *xattrList[], + gpfs_ino64_t *maxIno); + + +/* NAME: gpfs_next_inode() + * + * FUNCTION: Get next inode from inode scan. Scan terminates before + * the last inode specified or the last inode in the + * inode file being scanned. + * + * If the inode scan was opened to expressly look for inodes + * in a snapshot, and not dittos, gets the next inode skipping + * holes, if any. + * + * Input: iscan: ptr to inode scan descriptor + * termIno: scan terminates before this inode number + * caller may specify maxIno from gpfs_open_inodescan() + * or 0 to scan the entire inode file. + * iattr: pointer to returned pointer to file's iattr. + * + * Returns: 0 and *iattr set to point to gpfs_iattr_t (Successful) + * 0 and *iattr set to NULL for no more inodes before termIno + * -1 and errno is set (Failure) + * + * Errno: ENOSYS function not available + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * ENOMEM buffer too small + * GPFS_E_INVAL_ISCAN bad parameters + * GPFS_E_INVAL_FSSNAPID the snapshot id provided in the + * gpfs iscan is not valid + * + * Notes: The data returned by gpfs_next_inode() is overwritten by + * subsequent calls to gpfs_next_inode() or gpfs_seek_inode(). + * + * The termIno parameter provides a means to partition an + * inode scan such that it may be executed on more than one node. + */ +int GPFS_API +gpfs_next_inode(gpfs_iscan_t *iscan, + gpfs_ino_t termIno, + const gpfs_iattr_t **iattr); + +int GPFS_API +gpfs_next_inode64(gpfs_iscan_t *iscan, + gpfs_ino64_t termIno, + const gpfs_iattr64_t **iattr); + + +/* NAME: gpfs_next_inode_with_xattrs() + * + * FUNCTION: Get next inode and its extended attributes from the inode scan. + * The set of extended attributes returned were defined when + * the inode scan was opened. The scan terminates before the last + * inode specified or the last inode in the inode file being + * scanned. + * + * If the inode scan was opened to expressly look for inodes + * in a snapshot, and not dittos, gets the next inode skipping + * holes, if any. + * + * Input: iscan: ptr to inode scan descriptor + * termIno: scan terminates before this inode number + * caller may specify maxIno from gpfs_open_inodescan() + * or 0 to scan the entire inode file. + * iattr: pointer to returned pointer to file's iattr. + * xattrBuf: pointer to returned pointer to xattr buffer + * xattrBufLen: returned length of xattr buffer + * + * + * Returns: 0 and *iattr set to point to gpfs_iattr_t (Successful) + * 0 and *iattr set to NULL for no more inodes before termIno + * -1 and errno is set (Failure) + * + * Errno: ENOSYS function not available + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * EFAULT buffer data was overwritten + * ENOMEM buffer too small + * GPFS_E_INVAL_ISCAN bad parameters + * GPFS_E_INVAL_XATTR bad parameters + * + * Notes: The data returned by gpfs_next_inode() is overwritten by + * subsequent calls to gpfs_next_inode(), gpfs_seek_inode() + * or gpfs_stat_inode(). + * + * The termIno parameter provides a means to partition an + * inode scan such that it may be executed on more than one node. + * + * The returned values for xattrBuf and xattrBufLen must be + * provided to gpfs_next_xattr() to obtain the extended attribute + * names and values. The buffer used for the extended attributes + * is overwritten by subsequent calls to gpfs_next_inode(), + * gpfs_seek_inode() or gpfs_stat_inode(); + * + * The returned pointers to the extended attribute name and value + * will be aligned to a double-word boundary. + */ +int GPFS_API +gpfs_next_inode_with_xattrs(gpfs_iscan_t *iscan, + gpfs_ino_t termIno, + const gpfs_iattr_t **iattr, + const char **xattrBuf, + unsigned int *xattrBufLen); + +int GPFS_API +gpfs_next_inode_with_xattrs64(gpfs_iscan_t *iscan, + gpfs_ino64_t termIno, + const gpfs_iattr64_t **iattr, + const char **xattrBuf, + unsigned int *xattrBufLen); + + +/* NAME: gpfs_next_xattr() + * + * FUNCTION: Iterate over the extended attributes buffer returned + * by get_next_inode_with_xattrs to return the individual + * attributes and their values. Note that the attribute names + * are null-terminated strings, whereas the atttribute value + * contains binary data. + * + * Input: iscan: ptr to inode scan descriptor + * xattrBufLen: ptr to attribute buffer length + * xattrBuf: ptr to the ptr to the attribute buffer + * + * Returns: 0 and *name set to point attribue name (Successful) + * also sets: *valueLen to length of attribute value + * *value to point to attribute value + * *xattrBufLen to remaining length of buffer + * **xattrBuf to index next attribute in buffer + * 0 and *name set to NULL for no more attributes in buffer + * also sets: *valueLen to 0 + * *value to NULL + * *xattrBufLen to 0 + * **xattrBuf to NULL + * -1 and errno is set (Failure) + * + * Errno: ENOSYS function not available + * GPFS_E_INVAL_ISCAN invalid iscan parameter + * GPFS_E_INVAL_XATTR invalid xattr parameters + * + * Notes: The caller is not allowed to modify the returned attribute + * names or values. The data returned by gpfs_next_attribute() + * may be overwritten by subsequent calls to gpfs_next_attribute() + * or other gpfs library calls. + */ +int GPFS_API +gpfs_next_xattr(gpfs_iscan_t *iscan, + const char **xattrBuf, + unsigned int *xattrBufLen, + const char **name, + unsigned int *valueLen, + const char **value); + + + +/* NAME: gpfs_seek_inode() + * + * FUNCTION: Seek to a given inode number. + * + * Input: iscan: ptr to inode scan descriptor + * ino: next inode number to be scanned + * + * Returns: 0 Successful + * -1 Failure and errno is set + * + * Errno: ENOSYS function not available + * GPFS_E_INVAL_ISCAN bad parameters + */ +int GPFS_API +gpfs_seek_inode(gpfs_iscan_t *iscan, + gpfs_ino_t ino); + +int GPFS_API +gpfs_seek_inode64(gpfs_iscan_t *iscan, + gpfs_ino64_t ino); + + +#ifdef SNAPSHOT_ILM + +/* define GPFS generated errno */ +#define GPFS_E_HOLE_IN_IFILE 238 /* hole in inode file */ + +#endif +/* NAME: gpfs_stat_inode() + * NAME: gpfs_stat_inode_with_xattrs() + * + * FUNCTION: Seek to the specified inode and get that inode and + * its extended attributes from the inode scan. This is + * simply a combination of gpfs_seek_inode and get_next_inode + * but will only return the specified inode. + * + * Input: iscan: ptr to inode scan descriptor + * ino: inode number to be returned + * termIno: prefetch inodes up to this inode + * caller may specify maxIno from gpfs_open_inodescan() + * or 0 to allow prefetching over the entire inode file. + * iattr: pointer to returned pointer to file's iattr. + * xattrBuf: pointer to returned pointer to xattr buffer + * xattrBufLen: returned length of xattr buffer + * + * Returns: 0 and *iattr set to point to gpfs_iattr_t (Successful) + * 0 and *iattr set to NULL for no more inodes before termIno + * or if requested inode does not exist. + * -1 and errno is set (Failure) + * + * Errno: ENOSYS function not available + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * ENOMEM buffer too small + * GPFS_E_INVAL_ISCAN bad parameters + * GPFS_E_HOLE_IN_IFILE if we are expressly looking for inodes in + * the snapshot file and this one has yet not + * been copied into snapshot. + * + * Notes: The data returned by gpfs_next_inode() is overwritten by + * subsequent calls to gpfs_next_inode(), gpfs_seek_inode() + * or gpfs_stat_inode(). + * + * The termIno parameter provides a means to partition an + * inode scan such that it may be executed on more than one node. + * It is only used by this call to control prefetching. + * + * The returned values for xattrBuf and xattrBufLen must be + * provided to gpfs_next_xattr() to obtain the extended attribute + * names and values. The buffer used for the extended attributes + * is overwritten by subsequent calls to gpfs_next_inode(), + * gpfs_seek_inode() or gpfs_stat_inode(); + */ +int GPFS_API +gpfs_stat_inode(gpfs_iscan_t *iscan, + gpfs_ino_t ino, + gpfs_ino_t termIno, + const gpfs_iattr_t **iattr); + +int GPFS_API +gpfs_stat_inode64(gpfs_iscan_t *iscan, + gpfs_ino64_t ino, + gpfs_ino64_t termIno, + const gpfs_iattr64_t **iattr); + +int GPFS_API +gpfs_stat_inode_with_xattrs(gpfs_iscan_t *iscan, + gpfs_ino_t ino, + gpfs_ino_t termIno, + const gpfs_iattr_t **iattr, + const char **xattrBuf, + unsigned int *xattrBufLen); + +int GPFS_API +gpfs_stat_inode_with_xattrs64(gpfs_iscan_t *iscan, + gpfs_ino64_t ino, + gpfs_ino64_t termIno, + const gpfs_iattr64_t **iattr, + const char **xattrBuf, + unsigned int *xattrBufLen); + + +/* NAME: gpfs_close_inodescan() + * + * FUNCTION: Close inode file. + * + * Input: iscan: ptr to inode scan descriptor + * + * Returns: void + * + * Errno: None + */ +void GPFS_API +gpfs_close_inodescan(gpfs_iscan_t *iscan); + + +/* NAME: gpfs_cmp_fssnapid() + * + * FUNCTION: Compare two fssnapIds for the same file system to + * determine the order in which the two snapshots were taken. + * The 'result' variable will be set as follows: + * *result < 0: snapshot 1 was taken before snapshot 2 + * *result == 0: snapshot 1 and 2 are the same + * *result > 0: snapshot 1 was taken after snapshot 2 + * + * Input: fssnapId1: ptr to fssnapId 1 + * fssnapId2: ptr to fssnapId id 2 + * result: ptr to returned results + * + * Returns: 0 and *result is set as described above (Successful) + * -1 and errno is set (Failure) + * + * Errno: ENOSYS function not available + * GPFS_E_INVAL_FSSNAPID fssnapid1 or fssnapid2 is not a + * valid snapshot id + * EDOM the two snapshots cannot be compared because + * they were taken from two different file systems. + */ +int GPFS_API +gpfs_cmp_fssnapid(const gpfs_fssnap_id_t *fssnapId1, + const gpfs_fssnap_id_t *fssnapId2, + int *result); + + +/* NAME: gpfs_iopen() + * + * FUNCTION: Open a file or directory by inode number. + * + * Input: fssnapHandle: handle for file system and snapshot + * being scanned + * ino: inode number + * open_flags: O_RDONLY for gpfs_iread() + * O_WRONLY for gpfs_iwrite() + * O_CREAT create the file if it doesn't exist + * O_TRUNC if the inode already exists delete it + * caller may use GPFS_O_BACKUP to read files for backup + * and GPFS_O_RESTORE to write files for restore + * statxbuf: used only with O_CREAT/GPFS_O_BACKUP + * all other cases set to NULL + * symLink: used only with O_CREAT/GPFS_O_BACKUP for a symbolic link + * all other cases set to NULL + * + * Returns: pointer to gpfs_ifile_t (Successful) + * NULL and errno is set (Failure) + * + * Errno: ENOSYS function not available + * ENOENT file not existed + * EINVAL missing or bad parameter + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * ENOMEM unable to allocate memory for request + * EFORMAT invalid fs version number + * EIO error reading original inode + * ERANGE error ino is out of range, should use gpfs_iopen64 + * GPFS_E_INVAL_INUM reserved inode is not allowed to open + * GPFS_E_INVAL_IATTR iattr structure was corrupted + * see dup() and malloc() ERRORS + */ +gpfs_ifile_t * GPFS_API +gpfs_iopen(gpfs_fssnap_handle_t *fssnapHandle, + gpfs_ino_t ino, + int open_flags, + const gpfs_iattr_t *statxbuf, + const char *symLink); + +gpfs_ifile_t * GPFS_API +gpfs_iopen64(gpfs_fssnap_handle_t *fssnapHandle, + gpfs_ino64_t ino, + int open_flags, + const gpfs_iattr64_t *statxbuf, + const char *symLink); + + +/* Define gpfs_iopen flags as used by the backup & restore by inode. + The backup code will only read the source files. + The restore code writes the target files & creates them if they + don't already exist. The file length is set by the inode attributes. + Consequently, to restore a user file it is unnecessary to include + the O_TRUNC flag. */ +#define GPFS_O_BACKUP (O_RDONLY) +#define GPFS_O_RESTORE (O_WRONLY | O_CREAT) + + +/* NAME: gpfs_iread() + * + * FUNCTION: Read file opened by gpfs_iopen. + * + * Input: ifile: pointer to gpfs_ifile_t from gpfs_iopen + * buffer: buffer for data to be read + * bufferSize: size of buffer (ie amount of data to be read) + * In/Out offset: offset of where within the file to read + * if successful, offset will be updated to the + * next byte after the last one that was read + * + * Returns: number of bytes read (Successful) + * -1 and errno is set (Failure) + * + * Errno: ENOSYS function not available + * EISDIR file is a directory + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * GPFS_E_INVAL_IFILE bad ifile parameters + * see system call read() ERRORS + */ +int GPFS_API +gpfs_iread(gpfs_ifile_t *ifile, + void *buffer, + int bufferSize, + gpfs_off64_t *offset); + + +/* NAME: gpfs_iwrite() + * + * FUNCTION: Write file opened by gpfs_iopen. + * + * Input: ifile: pointer to gpfs_ifile_t from gpfs_iopen + * buffer: the data to be written + * writeLen: how much to write + * In/Out offset: offset of where within the file to write + * if successful, offset will be updated to the + * next byte after the last one that was written + * + * Returns: number of bytes written (Successful) + * -1 and errno is set (Failure) + * + * Errno: ENOSYS function not available + * EISDIR file is a directory + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * GPFS_E_INVAL_IFILE bad ifile parameters + * see system call write() ERRORS + */ +int GPFS_API +gpfs_iwrite(gpfs_ifile_t *ifile, + void *buffer, + int writeLen, + gpfs_off64_t *offset); + + +/* NAME: gpfs_ireaddir() + * + * FUNCTION: Get next directory entry. + * + * Input: idir: pointer to gpfs_ifile_t from gpfs_iopen + * dirent: pointer to returned pointer to directory entry + * + * Returns: 0 and pointer to gpfs_direntx set (Successful) + * 0 and pointer to gpfs_direntx set to NULL (End of directory) + * -1 and errno is set (Failure) + * + * Errno: ENOSYS function not available + * ENOTDIR file is not a directory + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * GPFS_E_INVAL_IFILE bad ifile parameter + * ENOMEM unable to allocate memory for request + * + * Notes: The data returned by gpfs_ireaddir() is overwritten by + * subsequent calls to gpfs_ireaddir(). + */ +int GPFS_API +gpfs_ireaddir(gpfs_ifile_t *idir, + const gpfs_direntx_t **dirent); + +int GPFS_API +gpfs_ireaddir64(gpfs_ifile_t *idir, + const gpfs_direntx64_t **dirent); + + +int GPFS_API +gpfs_ireaddirx(gpfs_ifile_t *idir, + gpfs_iscan_t *iscan, /* in only */ + const gpfs_direntx_t **dirent); + +int GPFS_API +gpfs_ireaddirx64(gpfs_ifile_t *idir, + gpfs_iscan_t *iscan, /* in only */ + const gpfs_direntx64_t **dirent); + + +/* NAME: gpfs_iwritedir() + * + * FUNCTION: Create a directory entry in a directory opened by gpfs_iopen. + * + * Input: idir: pointer to gpfs_ifile_t from gpfs_iopen + * dirent: directory entry to be written + * + * Returns: 0 (Successful) + * -1 and errno is set (Failure) + * + * Errno: ENOSYS function not available + * GPFS_E_INVAL_IFILE bad file pointer + * ENOTDIR file is not a directory + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * ENOMEM unable to allocate memory for request + * EFORMAT invalid dirent version number + * see system call write() ERRORS + */ +int GPFS_API +gpfs_iwritedir(gpfs_ifile_t *idir, + const gpfs_direntx_t *dirent); + +int GPFS_API +gpfs_iwritedir64(gpfs_ifile_t *idir, + const gpfs_direntx64_t *dirent); + + +/* NAME: gpfs_igetattrs() + * + * FUNCTION: Retrieves all extended file attributes in opaque format. + * This function together with gpfs_iputattrs is intended for + * use by a backup program to save (gpfs_igetattrs) and + * restore (gpfs_iputattrs) all extended file attributes + * (ACLs, user attributes, ...) in one call. + * + * NOTE: This call does not return extended attributes used for + * the Data Storage Management (XDSM) API (aka DMAPI). + * + * Input: ifile: pointer to gpfs_ifile_t from gpfs_iopen + * buffer: pointer to buffer for returned attributes + * bufferSize: size of buffer + * attrSize: ptr to returned size of attributes + * + * Returns: 0 Successful + * -1 Failure and errno is set + * + * Errno: ENOSYS function not available + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * ENOSPC buffer too small to return all attributes + * *attrSizeP will be set to the size necessary + * GPFS_E_INVAL_IFILE bad ifile parameters + */ +int GPFS_API +gpfs_igetattrs(gpfs_ifile_t *ifile, + void *buffer, + int bufferSize, + int *attrSize); + +/* NAME: gpfs_igetattrsx() + * + * FUNCTION: Retrieves all extended file attributes in opaque format. + * This function together with gpfs_iputattrsx is intended for + * use by a backup program to save (gpfs_igetattrsx) and + * restore (gpfs_iputattrsx) all extended file attributes + * (ACLs, user attributes, ...) in one call. + * + * NOTE: This call can optionally return extended attributes + * used for the Data Storage Management (XDSM) API + * (aka DMAPI). + * + * Input: ifile: pointer to gpfs_ifile_t from gpfs_iopen + * flags Define behavior of get attributes + * GPFS_ATTRFLAG_NO_PLACEMENT - file attributes for placement + * are not saved, neither is the current storage pool. + * GPFS_ATTRFLAG_IGNORE_POOL - file attributes for placement + * are saved, but the current storage pool is not. + * GPFS_ATTRFLAG_INCL_DMAPI - file attributes for dmapi are + * included in the returned buffer + * GPFS_ATTRFLAG_INCL_ENCR - file attributes for encryption + * are included in the returned buffer + * + * buffer: pointer to buffer for returned attributes + * bufferSize: size of buffer + * attrSize: ptr to returned size of attributes + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS function not available + * EINVAL Not a GPFS file + * EINVAL invalid flags provided + * ENOSPC buffer too small to return all attributes + * *attrSizeP will be set to the size necessary + */ +int GPFS_API +gpfs_igetattrsx(gpfs_ifile_t *ifile, + int flags, + void *buffer, + int bufferSize, + int *attrSize); + + +/* NAME: gpfs_igetxattr() + * + * FUNCTION: Retrieves an extended file attributes from ifile which has been open + * by gpfs_iopen(). + * + * NOTE: This call does not return extended attributes used for + * the Data Storage Management (XDSM) API (aka DMAPI). + * + * Input: ifile: pointer to gpfs_ifile_t from gpfs_iopen + * buffer: pointer to buffer for key and returned extended + * attribute value + * bufferSize: size of buffer, should be enough to save attribute value + * attrSize: ptr to key length as input and ptr to the returned + * size of attributes as putput. + * + * Returns: 0 Successful + * -1 Failure and errno is set + * + * Errno: ENOSYS function not available + * EPERM caller must have superuser priviledges + * ESTALE cached fs information was invalid + * ENOSPC buffer too small to return all attributes + * *attrSize will be set to the size necessary + * GPFS_E_INVAL_IFILE bad ifile parameters + */ +int GPFS_API +gpfs_igetxattr(gpfs_ifile_t *ifile, + void *buffer, + int bufferSize, + int *attrSize); + + +/* NAME: gpfs_iputattrs() + * + * FUNCTION: Sets all extended file attributes of a file. + * The buffer passed in should contain extended attribute data + * that was obtained by a previous call to gpfs_igetattrs. + * + * NOTE: This call will not restore extended attributes + * used for the Data Storage Management (XDSM) API + * (aka DMAPI). They will be silently ignored. + * + * Input: ifile: pointer to gpfs_ifile_t from gpfs_iopen + * buffer: pointer to buffer for returned attributes + * + * Returns: 0 Successful + * -1 Failure and errno is set + * + * Errno: ENOSYS function not available + * EINVAL the buffer does not contain valid attribute data + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * GPFS_E_INVAL_IFILE bad ifile parameters + */ +int GPFS_API +gpfs_iputattrs(gpfs_ifile_t *ifile, + void *buffer); + + +/* NAME: gpfs_iputattrsx() + * + * FUNCTION: Sets all extended file attributes of a file. + * + * This routine can optionally invoke the policy engine + * to match a RESTORE rule using the file's attributes saved + * in the extended attributes to set the file's storage pool and + * data replication as when calling gpfs_fputattrswithpathname. + * When used with the policy the caller should include the + * full path to the file, including the file name, to allow + * rule selection based on file name or path. + * + * By default, the routine will not use RESTORE policy rules + * for data placement. The pathName parameter will be ignored + * and may be set to NULL. + * + * If the call does not use RESTORE policy rules, or if the + * file fails to match a RESTORE rule, or if there are no + * RESTORE rules installed, then the storage pool and data + * replication are selected as when calling gpfs_fputattrs(). + * + * The buffer passed in should contain extended attribute data + * that was obtained by a previous call to gpfs_fgetattrs. + * + * pathName is a UTF-8 encoded string. On Windows, applications + * can convert UTF-16 ("Unicode") to UTF-8 using the platforms + * WideCharToMultiByte function. + * + * NOTE: This call will restore extended attributes + * used for the Data Storage Management (XDSM) API + * (aka DMAPI) if they are present in the buffer. + * + * Input: ifile: pointer to gpfs_ifile_t from gpfs_iopen + * flags Define behavior of put attributes + * GPFS_ATTRFLAG_NO_PLACEMENT - file attributes are restored + * but the storage pool and data replication are unchanged + * GPFS_ATTRFLAG_IGNORE_POOL - file attributes are restored + * but the storage pool and data replication are selected + * by matching the saved attributes to a placement rule + * instead of restoring the saved storage pool. + * GPFS_ATTRFLAG_USE_POLICY - file attributes are restored + * but the storage pool and data replication are selected + * by matching the saved attributes to a RESTORE rule + * instead of restoring the saved storage pool. + * GPFS_ATTRFLAG_FINALIZE_ATTRS - file attributes that are restored + * after data is retored. If file is immutable/appendOnly + * call without this flag before restoring data + * then call with this flag after restoring data + * GPFS_ATTRFLAG_INCL_ENCR - file attributes for encryption + * are restored. Note that this may result in the file's + * File Encryption Key (FEK) being changed, and in this + * case any prior content in the file is effectively lost. + * This option should only be used when the entire file + * content is restored after the attributes are restored. + * + * buffer: pointer to buffer for returned attributes + * pathName: pointer to file path and file name for file + * May be set to NULL. + * + * Returns: 0 Successful + * -1 Failure and errno is set + * + * Errno: ENOSYS function not available + * EINVAL the buffer does not contain valid attribute data + * EINVAL invalid flags provided + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * GPFS_E_INVAL_IFILE bad ifile parameters + */ +int GPFS_API +gpfs_iputattrsx(gpfs_ifile_t *ifile, + int flags, + void *buffer, + const char *pathName); + + +/* NAME: gpfs_igetfilesetname() + * + * FUNCTION: Retrieves the name of the fileset which contains this file. + * The fileset name is a null-terminated string, with a + * a maximum length of GPFS_MAXNAMLEN. + * + * Input: iscan: ptr to gpfs_iscan_t from gpfs_open_inodescan() + * filesetId: ia_filesetId returned in an iattr from the iscan + * buffer: pointer to buffer for returned fileset name + * bufferSize: size of buffer + * + * Returns: 0 Successful + * -1 Failure and errno is set + * + * Errno: ENOSYS function not available + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * ENOSPC buffer too small to return fileset name + * GPFS_E_INVAL_ISCAN bad iscan parameter + */ +int GPFS_API +gpfs_igetfilesetname(gpfs_iscan_t *iscan, + unsigned int filesetId, + void *buffer, + int bufferSize); + + +/* NAME: gpfs_igetstoragepool() + * + * FUNCTION: Retrieves the name of the storage pool assigned for + * this file's data. The storage pool name is a null-terminated + * string, with a maximum length of GPFS_MAXNAMLEN. + * + * Input: iscan: ptr to gpfs_iscan_t from gpfs_open_inodescan() + * dataPoolId: ia_dataPoolId returned in an iattr from the iscan + * buffer: pointer to buffer for returned attributes + * bufferSize: size of buffer + * + * Returns: 0 Successful + * -1 Failure and errno is set + * + * Errno: ENOSYS function not available + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * ENOSPC buffer too small to return all storage pool name + * GPFS_E_INVAL_ISCAN bad iscan parameters + */ +int GPFS_API +gpfs_igetstoragepool(gpfs_iscan_t *iscan, + unsigned int dataPoolId, + void *buffer, + int bufferSize); + + +/* NAME: gpfs_iclose() + * + * FUNCTION: Close file opened by inode and update dates. + * + * Input: ifile: pointer to gpfs_ifile_t from gpfs_iopen + * + * Returns: void + */ +void GPFS_API +gpfs_iclose(gpfs_ifile_t *ifile); + + +/* NAME: gpfs_ireadlink() + * + * FUNCTION: Read symbolic link by inode number. + * + * Input: fssnapHandle: handle for file system & snapshot being scanned + * ino: inode number of link file to read + * buffer: pointer to buffer for returned link data + * bufferSize: size of the buffer + * + * Returns: number of bytes read (Successful) + * -1 and errno is set (Failure) + * + * Errno: ENOSYS function not available + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * GPFS_E_INVAL_FSSNAPHANDLE invalid fssnap handle + * see system call readlink() ERRORS + */ +int GPFS_API +gpfs_ireadlink(gpfs_fssnap_handle_t *fssnapHandle, + gpfs_ino_t ino, + char *buffer, + int bufferSize); + +int GPFS_API +gpfs_ireadlink64(gpfs_fssnap_handle_t *fssnapHandle, + gpfs_ino64_t ino, + char *buffer, + int bufferSize); + + +/* NAME: gpfs_sync_fs() + * + * FUNCTION: sync file system. + * + * Input: fssnapHandle: handle for file system being restored + * + * Returns: 0 all data flushed to disk (Successful) + * -1 and errno is set (Failure) + * + * Errno: ENOSYS function not available + * ENOMEM unable to allocate memory for request + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * GPFS_E_INVAL_FSSNAPHANDLE invalid fssnapHandle + */ +int GPFS_API +gpfs_sync_fs(gpfs_fssnap_handle_t *fssnapHandle); + + +/* NAME: gpfs_enable_restore() + * + * FUNCTION: Mark file system as enabled for restore on/off + * + * Input: fssnapHandle: handle for file system to be enabled + * or disabled for restore + * on_off: flag set to 1 to enable restore + * 0 to disable restore + * + * Returns: 0 (Successful) + * -1 and errno is set (Failure) + * + * Errno: ENOSYS function not available + * EINVAL bad parameters + * GPFS_E_INVAL_FSSNAPHANDLE invalid fssnapHandle + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * ENOMEM unable to allocate memory for request + * E_FS_NOT_RESTORABLE fs is not clean + * EALREADY fs already marked as requested + * E_RESTORE_STARTED restore in progress + * + * Notes: EALREADY indicates enable/disable restore was already called + * for this fs. The caller must decide if EALREADY represents an + * error condition. + */ +int GPFS_API +gpfs_enable_restore(gpfs_fssnap_handle_t *fssnapHandle, + int on_off); + + +/* NAME: gpfs_start_restore() + * + * FUNCTION: Start a restore session. + * + * Input: fssnapHandle: handle for file system to be restored + * restore_flags: Flag to indicate the restore should be started + * even if a prior restore has not completed. + * old_fssnapId: fssnapId of last restored snapshot + * new_fssnapId: fssnapId of snapshot being restored + * + * Returns: pointer to gpfs_restore_t (Successful) + * NULL and errno is set (Failure) + * + * Errno: ENOSYS function not available + * ENOMEM unable to allocate memory for request + * EINVAL missing parameter + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * EDOM restore fs does not match existing fs + * ERANGE restore is missing updates + * EFORMAT invalid fs version number + * GPFS_E_INVAL_FSSNAPHANDLE invalid fssnaphandle + * GPFS_E_INVAL_FSSNAPID bad fssnapId parameter + * E_FS_NOT_RESTORABLE fs is not clean for restore + * E_RESTORE_NOT_ENABLED fs is not enabled for restore + * EALREADY Restore already in progress + * + * Note: EALREADY indicates start restore was already called for + * this fs. This could be due to a prior restore process that failed + * or it could be due to a concurrent restore process still running. + * The caller must decide if EALREADY represents an error condition. + */ +gpfs_restore_t * GPFS_API +gpfs_start_restore(gpfs_fssnap_handle_t *fssnapHandle, + int restore_flags, + const gpfs_fssnap_id_t *old_fssnapId, + const gpfs_fssnap_id_t *new_fssnapId); + +#define GPFS_RESTORE_NORMAL 0 /* Restore not started if prior restore + has not completed. */ +#define GPFS_RESTORE_FORCED 1 /* Restore starts even if prior restore + has not completed. */ + + +/* NAME: gpfs_end_restore() + * + * FUNCTION: End a restore session. + * + * Input: restoreId: ptr to gpfs_restore_t + * + * Returns: 0 (Successful) + * -1 and errno is set (Failure) + * + * Errno: ENOSYS function not available + * EINVAL bad parameters + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * GPFS_E_INVAL_RESTORE bad restoreId parameter + * GPFS_E_FS_NOT_RESTORABLE fs is not clean for restore + * GPFS_E_RESTORE_NOT_ENABLED fs is not enabled for restore + * EALREADY Restore already ended + * + * Note: EALREADY indicates end restore was already called for + * this fs. This could be due to a concurrent restore process that + * already completed. The caller must decide if EALREADY represents + * an error condition. + */ +int GPFS_API +gpfs_end_restore(gpfs_restore_t *restoreId); + + +/* NAME: gpfs_ireadx() + * + * FUNCTION: Block level incremental read on a file opened by gpfs_iopen + * with a given incremental scan opened via gpfs_open_inodescan. + * + * Input: ifile: ptr to gpfs_ifile_t returned from gpfs_iopen() + * iscan: ptr to gpfs_iscan_t from gpfs_open_inodescan() + * buffer: ptr to buffer for returned data + * bufferSize: size of buffer for returned data + * offset: ptr to offset value + * termOffset: read terminates before reading this offset + * caller may specify ia_size for the file's + * gpfs_iattr_t or 0 to scan the entire file. + * hole: ptr to returned flag to indicate a hole in the file + * + * Returns: number of bytes read and returned in buffer + * or size of hole encountered in the file. (Success) + * -1 and errno is set (Failure) + * + * On input, *offset contains the offset in the file + * at which to begin reading to find a difference same file + * in a previous snapshot specified when the inodescan was opened. + * On return, *offset contains the offset of the first + * difference. + * + * On return, *hole indicates if the change in the file + * was data (*hole == 0) and the data is returned in the + * buffer provided. The function's value is the amount of data + * returned. If the change is a hole in the file, + * *hole != 0 and the size of the changed hole is returned + * as the function value. + * + * A call with a NULL buffer pointer will query the next increment + * to be read from the current offset. The *offset, *hole and + * returned length will be set for the next increment to be read, + * but no data will be returned. The bufferSize parameter is + * ignored, but the termOffset parameter will limit the + * increment returned. + * + * Errno: ENOSYS function not available + * EINVAL missing or bad parameter + * EISDIR file is a directory + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * ENOMEM unable to allocate memory for request + * EDOM fs snapId does match local fs + * ERANGE previous snapId is more recent than scanned snapId + * GPFS_E_INVAL_IFILE bad ifile parameter + * GPFS_E_INVAL_ISCAN bad iscan parameter + * see system call read() ERRORS + * + * Notes: The termOffset parameter provides a means to partition a + * file's data such that it may be read on more than one node. + */ +gpfs_off64_t GPFS_API +gpfs_ireadx(gpfs_ifile_t *ifile, /* in only */ + gpfs_iscan_t *iscan, /* in only */ + void *buffer, /* in only */ + int bufferSize, /* in only */ + gpfs_off64_t *offset, /* in/out */ + gpfs_off64_t termOffset, /* in only */ + int *hole); /* out only */ + + +/* NAME: gpfs_ireadx_ext + * + * FUNCTION: gpfs_ireadx_ext is used to find different blocks between clone + * child and parent files. Input and output are the same as + * gpfs_ireadx. + * + * Returns: See gpfs_ireadx() + */ +gpfs_off64_t GPFS_API +gpfs_ireadx_ext(gpfs_ifile_t *ifile, /* in only */ + gpfs_iscan_t *iscan, /* in only */ + void *buffer, /* in only */ + int bufferSize, /* in only */ + gpfs_off64_t *offset, /* in/out */ + gpfs_off64_t termOffset, /* in only */ + int *hole); + + +/* NAME: gpfs_iwritex() + * + * FUNCTION: Write file opened by gpfs_iopen. + * If parameter hole == 0, then write data + * addressed by buffer to the given offset for the + * given length. If hole != 0, then write + * a hole at the given offset for the given length. + * + * Input: ifile : ptr to gpfs_ifile_t returned from gpfs_iopen() + * buffer: ptr to data buffer + * writeLen: length of data to write + * offset: offset in file to write data + * hole: flag =1 to write a "hole" + * =0 to write data + * + * Returns: number of bytes/size of hole written (Success) + * -1 and errno is set (Failure) + * + * Errno: ENOSYS function not available + * EINVAL missing or bad parameter + * EISDIR file is a directory + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * GPFS_E_INVAL_IFILE bad ifile parameter + * see system call write() ERRORS + */ +gpfs_off64_t GPFS_API +gpfs_iwritex(gpfs_ifile_t *ifile, /* in only */ + void *buffer, /* in only */ + gpfs_off64_t writeLen, /* in only */ + gpfs_off64_t offset, /* in only */ + int hole); /* in only */ + + +/* NAME: gpfs_statfspool() + * + * FUNCTION: Obtain status information about the storage pools + * + * Input: pathname : path to any file in the file system + * poolId : id of first pool to return + * on return set to next poolId or -1 + * to indicate there are no more pools. + * options : option flags (currently not used) + * nPools : number of stat structs requested or 0 + * on return number of stat structs in buffer + * or if nPools was 0 its value is the max number + * of storage pools currently defined + * buffer : ptr to return stat structures + * bufferSize : sizeof stat buffer + * + * The user is expected to issue two or more calls. On the first + * call the user should pass nPools set to 0 and gpfs will + * return in nPools the total number of storage pools currently + * defined for the file system indicated by the pathname + * and it returns in poolId the id of the first storage pool. + * The buffer parameter may be set to NULL for this call. + * + * The user may then allocate a buffer large enough to contain + * a gpfs_statfspool_t structure for each of the pools and issue + * a second call to obtain stat information about each pool. + * Parameter nPools should be set the number of pools requested. + * On return, nPools will be set to the number of stat structs + * contained in the buffer, and poolId will be set to the id + * of the next storage pool or -1 to indicate there are no + * additional storage pools defined. + * + * Alternatively, if the user has a valid poolId from a previous + * call, the user may provide that poolId and a buffer large + * enough for a single gpfs_statfspool_t structure, and the call + * will return the status for a single storage pool. + * + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: Specific error indication + * EINVAL + */ +int GPFS_API +gpfs_statfspool(const char *pathname, /* in only: path to file system*/ + gpfs_pool_t *poolId, /* in out: id of first pool to return + on return set to next poolId + or -1 when there are no more pools */ + unsigned int options, /* in only: option flags */ + int *nPools, /* in out: number of pool stats requested + on return number of stat structs + returned in buffer or if nPools was + set to 0, the return value is the + number of pools currently defined */ + void *buffer, /* ptr to return stat structures */ + int bufferSize); /* sizeof stat buffer or 0 */ + + +/* NAME: gpfs_getpoolname() + * + * FUNCTION: Retrieves the name of the storage pool assigned for + * this file's data. The storage pool name is a null-terminated + * string, with a maximum length of GPFS_MAXNAMLEN. + * + * Input: pathname: path to any file in the file system + * poolId: f_poolid returned in gpfs_statfspool_t + * buffer: pointer to buffer for returned name + * bufferSize: size of buffer + * + * Returns: 0 Successful + * -1 Failure and errno is set + * + * Errno: ENOSYS function not available + * ESTALE file system was unmounted + * E_FORMAT_INCOMPAT file system does not support pools + * E2BIG buffer too small to return storage pool name + */ +int GPFS_API +gpfs_getpoolname(const char *pathname, + gpfs_pool_t poolId, + void *buffer, + int bufferSize); + + +/* /usr/src/linux/include/linux/fs.h includes /usr/src/linux/include/linux/quota.h + which has conflicting definitions. */ +#ifdef _LINUX_QUOTA_ + #undef Q_SYNC + #undef Q_GETQUOTA + #undef Q_SETQUOTA + #undef Q_QUOTAON + #undef Q_QUOTAOFF +#endif + + +/* GPFS QUOTACTL */ + +/* + * Command definitions for the 'gpfs_quotactl' system call. + * The commands are broken into a main command defined below + * and a subcommand that is used to convey the type of + * quota that is being manipulated (see above). + */ + +#define SUBCMDMASK 0x00ff +#define SUBCMDSHIFT 8 +#define GPFS_QCMD(cmd, type) (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK)) + +#define Q_QUOTAON 0x0100 /* enable quotas */ +#define Q_QUOTAOFF 0x0200 /* disable quotas */ +#define Q_GETQUOTA 0x0300 /* get limits and usage */ +#ifndef _LINUX_SOURCE_COMPAT + /* Standard AIX definitions of quota commands */ + #define Q_SETQUOTA 0x0400 /* set limits */ + #define Q_SETQLIM Q_SETQUOTA +#else + /* Alternate definitions, for Linux Affinity */ + #define Q_SETQLIM 0x0400 /* set limits */ + #define Q_SETQUOTA 0x0700 /* set limits and usage */ +#endif +#define Q_SETUSE 0x0500 /* set usage */ +#define Q_SYNC 0x0600 /* sync disk copy of a file systems quotas */ +#define Q_SETGRACETIME 0x0900 /* set grace time */ +#define Q_SETGRACETIME_ENHANCE 0x0800 /* set grace time and update all + * quota entries */ +#define Q_GETDQPFSET 0x0A00 /* get default quota per fileset */ +#define Q_SETDQPFSET 0x0B00 /* set default quota per fileset */ +#define Q_SETQUOTA_UPDATE_ET 0x0C00 /* this SETQUOTA needs to update entryType */ +#define Q_GETDQPFSYS 0x0D00 /* get default quota per file system */ +#define Q_SETDQPFSYS 0x0E00 /* set default quota per file system */ + +/* gpfs quota types */ +#define GPFS_USRQUOTA 0 +#define GPFS_GRPQUOTA 1 +#define GPFS_FILESETQUOTA 2 + +/* define GPFS generated errno */ +#define GPFS_E_NO_QUOTA_INST 237 /* file system does not support quotas */ + +typedef struct gpfs_quotaInfo +{ + gpfs_off64_t blockUsage; /* current block count in 1 KB units*/ + gpfs_off64_t blockHardLimit; /* absolute limit on disk blks alloc */ + gpfs_off64_t blockSoftLimit; /* preferred limit on disk blks */ + gpfs_off64_t blockInDoubt; /* distributed shares + "lost" usage for blks */ + int inodeUsage; /* current # allocated inodes */ + int inodeHardLimit; /* absolute limit on allocated inodes */ + int inodeSoftLimit; /* preferred inode limit */ + int inodeInDoubt; /* distributed shares + "lost" usage for inodes */ + gpfs_uid_t quoId; /* uid, gid or fileset id */ + int entryType; /* entry type, not used */ + unsigned int blockGraceTime; /* time limit for excessive disk use */ + unsigned int inodeGraceTime; /* time limit for excessive inode use */ +} gpfs_quotaInfo_t; + + +/* NAME: gpfs_quotactl() + * + * FUNCTION: Manipulate disk quotas + * INPUT: pathname: specifies the pathname of any file within the + * mounted file system to which the command is to + * be applied + * cmd: specifies a quota control command to be applied + * to UID/GID/FILESETID id. The cmd parameter can be + * constructed using GPFS_QCMD(cmd, type) macro defined + * in gpfs.h + * id: UID or GID or FILESETID that command applied to. + * bufferP: points to the address of an optional, command + * specific, data structure that is copied in or out of + * the system. + * + * OUTPUT: bufferP, if applicable. + * + * Returns: 0 success + * -1 failure + * + * Errno: EACCESS + * EFAULT An invalid bufferP parameter is supplied; + * the associated structure could not be copied + * in or out of the kernel + * EINVAL + * ENOENT No such file or directory + * EPERM The quota control command is privileged and + * the caller did not have root user authority + * EOPNOTSUPP + * GPFS_E_NO_QUOTA_INST The file system does not support quotas + */ +int GPFS_API +gpfs_quotactl(const char *pathname, + int cmd, + int id, + void *bufferP); + + +/* NAME: gpfs_getfilesetid() + * + * FUNCTION: Translate FilesetName to FilesetID + * + * INPUT: pathname: specifies the pathname of any file within the + * mounted file system to which the command is to + * be applied + * name: name of the fileset + * + * OUTPUT: idP: points to the address of an integer that receives the ID + * + * Returns: 0 success + * -1 failure + * + * Errno: EACCESS + * EFAULT An invalid pointer is supplied; the associated + * data could not be copied in or out of the kernel + * EINVAL + * ENOENT No such file, directory or fileset + */ +int GPFS_API +gpfs_getfilesetid(const char *pathname, + const char *name, + int *idP); + + +/* NAME: gpfs_clone_snap() + * + * FUNCTION: Create an immutable clone parent from a source file + * + * Input: sourcePathP: path to source file, which will be cloned + * destPathP: path to destination file, to be created + * + * If destPathP is NULL, then the source file will be changed + * in place into an immutable clone parent. + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS Function not available + * ENOENT File does not exist + * EACCESS Write access to target or source search permission denied + * EINVAL Not a regular file or not a GPFS file system + * EFAULT Input argument points outside accessible address space + * ENAMETOOLONG Source or destination path name too long + * ENOSPC Not enough space on disk + * EISDIR Destination is a directory + * EXDEV Source and destination aren't in the same file system + * EROFS Destination is read-only + * EPERM Invalid source file + * EEXIST Destination file already exists + * EBUSY Source file is open + * EFORMAT File system does not support clones + * EMEDIUMTYPE File system does not support clones + */ +int GPFS_API +gpfs_clone_snap(const char *sourcePathP, const char *destPathP); + +/* NAME: gpfs_clone_copy() + * + * FUNCTION: Create a clone copy of an immutable clone parent file + * + * Input: sourcePathP: path to immutable source file, to be cloned + * destPathP: path to destination file, to be created + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS Function not available + * ENOENT File does not exist + * EACCESS Write access to target or source search permission denied + * EINVAL Not a regular file or not a GPFS file system + * EFAULT Input argument points outside accessible address space + * ENAMETOOLONG Source or destination path name too long + * ENOSPC Not enough space on disk + * EISDIR Destination is a directory + * EXDEV Source and destination aren't in the same file system + * EROFS Destination is read-only + * EPERM Invalid source or destination file + * EEXIST Destination file already exists + * EFORMAT File system does not support clones + * EMEDIUMTYPE File system does not support clones + */ +int GPFS_API +gpfs_clone_copy(const char *sourcePathP, const char *destPathP); + + +/* NAME: gpfs_declone() + * + * FUNCTION: Copy blocks from clone parent(s) to child so that the + * parent blocks are no longer referenced by the child. + * + * Input: fileDesc: File descriptor for file to be de-cloned + * ancLimit: Ancestor limit (immediate parent only, or all) + * nBlocks: Maximum number of GPFS blocks to copy + * In/Out: offsetP: Pointer to starting offset within file (will be + * updated to offset of next block to process or + * -1 if no more blocks) + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS Function not available + * EINVAL Invalid argument to function + * EBADF Bad file descriptor or not a GPFS file + * EPERM Not a regular file + * EACCESS Write access to target file not permitted + * EFAULT Input argument points outside accessible address space + * ENOSPC Not enough space on disk + */ + +/* Values for ancLimit */ +#define GPFS_CLONE_ALL 0 +#define GPFS_CLONE_PARENT_ONLY 1 + +int GPFS_API +gpfs_declone(gpfs_file_t fileDesc, int ancLimit, gpfs_off64_t nBlocks, + gpfs_off64_t *offsetP); + +/* NAME: gpfs_clone_split() + * + * FUNCTION: Split a clone child file from its parent. Must call + * gpfs_declone first, to remove all references. + * + * Input: fileDesc: File descriptor for file to be split + * ancLimit: Ancestor limit (immediate parent only, or all) + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS Function not available + * EINVAL Invalid argument to function + * EBADF Bad file descriptor or not a GPFS file + * EPERM Not a regular file or not a clone child + * EACCESS Write access to target file not permitted + */ +int GPFS_API +gpfs_clone_split(gpfs_file_t fileDesc, int ancLimit); + +/* NAME: gpfs_clone_unsnap() + * + * FUNCTION: Change a clone parent with no children back into a + * normal file. + * + * Input: fileDesc: File descriptor for file to be un-snapped + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS Function not available + * EINVAL Invalid argument to function + * EBADF Bad file descriptor or not a GPFS file + * EPERM Not a regular file or not a clone parent + * EACCESS Write access to target file not permitted + */ +int GPFS_API +gpfs_clone_unsnap(gpfs_file_t fileDesc); + +/* NAME: gpfs_get_fset_masks() + * + * FUNCTION: return bit masks governing "external" inode and inode-space numbering + * + * Input: fset_snaphandle: ptr to an fset snaphandle + * Output: the bit masks and inodes per block factor. + * + * Returns: 0 Success + * -1 Failure + * + * Errno: ENOSYS function not available + * GPFS_E_INVAL_FSSNAPHANDLE invalid fssnapHandle + */ +int GPFS_API +gpfs_get_fset_masks(gpfs_fssnap_handle_t* fset_snapHandle, + gpfs_ino64_t* inodeSpaceMask, + gpfs_ino64_t* inodeBlockMask, + int* inodesPerInodeBlock); + + +/* + * API functions for Light Weight Event + */ + +/* + * Define light weight event types + */ +typedef enum +{ + GPFS_LWE_EVENT_UNKNOWN = 0, /* "Uknown event" */ + GPFS_LWE_EVENT_FILEOPEN = 1, /* 'OPEN' - look at getInfo('OPEN_FLAGS') if you care */ + GPFS_LWE_EVENT_FILECLOSE = 2, /* "File Close Event" 'CLOSE' */ + GPFS_LWE_EVENT_FILEREAD = 3, /* "File Read Event" 'READ' */ + GPFS_LWE_EVENT_FILEWRITE = 4, /* "File Write Event" 'WRITE' */ + GPFS_LWE_EVENT_FILEDESTROY = 5, /* File is being destroyed 'DESTROY' */ + GPFS_LWE_EVENT_FILEEVICT = 6, /* OpenFile object is being evicted from memory 'FILE_EVICT' */ + GPFS_LWE_EVENT_BUFFERFLUSH = 7, /* Data buffer is being written to disk 'BUFFER_FLUSH' */ + GPFS_LWE_EVENT_POOLTHRESHOLD = 8, /* Storage pool exceeded defined utilization 'POOL_THRESHOLD' */ + GPFS_LWE_EVENT_FILEDATA = 9, /* "Read/Write/Trunc" event on open file */ + GPFS_LWE_EVENT_FILERENAME = 10, /* Rename event on open file */ + GPFS_LWE_EVENT_FILEUNLINK = 11, /* Unlink file event */ + GPFS_LWE_EVENT_FILERMDIR = 12, /* Remove directory event */ + GPFS_LWE_EVENT_EVALUATE = 13, /* Evaluate And Set Events */ + + GPFS_LWE_EVENT_FILEOPEN_READ = 14, /* Open for Read Only - EVENT 'OPEN_READ' - deprecated, use 'OPEN' */ + GPFS_LWE_EVENT_FILEOPEN_WRITE = 15, /* Open with Writing privileges - EVENT 'OPEN_WRITE' - deprecated, use 'OPEN' */ + + GPFS_LWE_EVENT_FILEPOOL_CHANGE = 16, /* Open with Writing privileges - EVENT 'OPEN_WRITE' - deprecated, use 'OPEN' */ + + GPFS_LWE_EVENT_MAX = 17, /* 1 greater than any of the above */ +} gpfs_lwe_eventtype_t; + + +/* Define light weight event response types */ +typedef enum +{ + GPFS_LWE_RESP_INVALID = 0, /* "Response Invalid/Unknown" */ + GPFS_LWE_RESP_CONTINUE = 1, /* "Response Continue" */ + GPFS_LWE_RESP_ABORT = 2, /* "Response Abort" */ + GPFS_LWE_RESP_DONTCARE = 3 /* "Response DontCare" */ +} gpfs_lwe_resp_t; + +/* + * Define light weight event inofrmation + */ +#define LWE_DATA_FS_NAME 0x00000001 /* "fsName" */ +#define LWE_DATA_PATH_NAME 0x00000002 /* "pathName" */ +#define LWE_DATA_PATH_NEW_NAME 0x00000004 /* "pathNewName" for reanem */ +#define LWE_DATA_URL 0x00000008 /* "URL" */ +#define LWE_DATA_INODE 0x00000010 /* "inode" */ +#define LWE_DATA_OPEN_FLAGS 0x00000020 /* "openFlags" */ +#define LWE_DATA_POOL_NAME 0x00000040 /* "poolName" */ +#define LWE_DATA_FILE_SIZE 0x00000080 /* "fileSize" */ +#define LWE_DATA_OWNER_UID 0x00000100 /* "ownerUserId" */ +#define LWE_DATA_OWNER_GID 0x00000200 /* "ownerGroupId" */ +#define LWE_DATA_ATIME 0x00000400 /* "atime" */ +#define LWE_DATA_MTIME 0x00000800 /* "mtime" */ +#define LWE_DATA_NOW_TIME 0x00001000 /* "nowTime" */ +#define LWE_DATA_ELAPSED_TIME 0x00002000 /* "elapsedTime" */ +#define LWE_DATA_CLIENT_UID 0x00004000 /* "clientUserId" */ +#define LWE_DATA_CLIENT_GID 0x00008000 /* "clientGroupId" */ +#define LWE_DATA_NFS_IP 0x00010000 /* "clientIp" */ +#define LWE_DATA_PROCESS_ID 0x00020000 /* "processId" */ +#define LWE_DATA_TARGET_POOL_NAME 0x00040000 /* "targetPoolName" */ +#define LWE_DATA_BYTES_READ 0x00080000 /* "bytesRead" */ +#define LWE_DATA_BYTES_WRITTEN 0x00100000 /* "bytesWritten" */ +#define LWE_DATA_CLUSTER_NAME 0x00200000 /* "clusterName" */ +#define LWE_DATA_NODE_NAME 0x00400000 /* "nodeName" */ + +/* + * Define light weight events + */ +#define LWE_EVENT_EVALUATED 0x00000001 /* policy was evaluated */ +#define LWE_EVENT_FILEOPEN 0x00000002 /* "op_open" */ +#define LWE_EVENT_FILECLOSE 0x00000004 /* "op_close" */ +#define LWE_EVENT_FILEREAD 0x00000008 /* "op_read" */ +#define LWE_EVENT_FILEWRITE 0x00000010 /* "op_write" */ +#define LWE_EVENT_FILEDESTROY 0x00000020 /* "op_destroy" */ +#define LWE_EVENT_FILEEVICT 0x00000040 /* "op_evict" OpenFile object is being evicted from memory 'FILE_EVICT' */ +#define LWE_EVENT_BUFFERFLUSH 0x00000080 /* "op_buffer_flush" Data buffer is being written to disk 'BUFFER_FLUSH' */ +#define LWE_EVENT_POOLTHRESHOLD 0x00000100 /* "op_pool_threshhold" Storage pool exceeded defined utilization 'POOL_THRESHOLD' */ +#define LWE_EVENT_FILEDATA 0x00000200 /* "op_data" "Read/Write/Trunc" event on open file */ +#define LWE_EVENT_FILERENAME 0x00000400 /* "op_rename" Rename event on open file */ +#define LWE_EVENT_FILEUNLINK 0x00000800 /* "op_unlink" Unlink file event */ +#define LWE_EVENT_FILERMDIR 0x00001000 /* "op_rmdir" Remove directory event */ +#define LWE_EVENT_FILEOPEN_READ 0x00002000 /* "op_open_read" Open for Read Only - EVENT 'OPEN_READ' - deprecated, use 'OPEN' */ +#define LWE_EVENT_FILEOPEN_WRITE 0x00004000 /* "op_open_write" Open with Writing privileges - EVENT 'OPEN_WRITE' - deprecated, use 'OPEN' */ +#define LWE_EVENT_FILEPOOL_CHANGE 0x00008000 /* "op_pool_change" Open with Writing privileges - EVENT 'OPEN_WRITE' - deprecated, use 'OPEN' */ + +/* + * Defines for light weight sessions + */ +typedef unsigned long long gpfs_lwe_sessid_t; +#define GPFS_LWE_NO_SESSION ((gpfs_lwe_sessid_t) 0) +#define GPFS_LWE_SESSION_INFO_LEN 256 + + +/* + * Define light weight token to identify access right + */ +typedef struct gpfs_lwe_token +{ + unsigned long long high; + unsigned long long low; + +#ifdef __cplusplus + bool operator == (const struct gpfs_lwe_token& rhs) const + { return high == rhs.high && low == rhs.low; }; + bool operator != (const struct gpfs_lwe_token& rhs) const + { return high != rhs.high || low != rhs.low; }; +#endif /* __cplusplus */ + +} gpfs_lwe_token_t; + +/* Define special tokens */ +static const gpfs_lwe_token_t _gpfs_lwe_no_token = { 0, 0 }; +#define GPFS_LWE_NO_TOKEN _gpfs_lwe_no_token + +static const gpfs_lwe_token_t _gpfs_lwe_invalid_token = { 0, 1 }; +#define GPFS_LWE_INVALID_TOKEN _gpfs_lwe_invalid_token + +/* + * Note: LWE data managers can set a file's off-line bit + * or any of the managed bits visible to the policy language + * by calling dm_set_region or dm_set_region_nosync + * with a LWE session and LWE exclusive token. To set the bits + * there must be * exactly one managed region with offset = -1 + * and size = 0. Any other values will return EINVAL. + */ + +/* LWE also provides light weight regions + * that are set via policy rules. + */ +#define GPFS_LWE_MAX_REGIONS 2 + +/* LWE data events are generated from user access + * to a LWE managed region. */ +#define GPFS_LWE_DATAEVENT_NONE (0x0) +#define GPFS_LWE_DATAEVENT_READ (0x1) +#define GPFS_LWE_DATAEVENT_WRITE (0x2) +#define GPFS_LWE_DATAEVENT_TRUNCATE (0x4) + + + +/* + * Define light weight event structure + */ +typedef struct gpfs_lwe_event { + int eventLen; /* offset 0 */ + gpfs_lwe_eventtype_t eventType; /* offset 4 */ + gpfs_lwe_token_t eventToken; /* offset 8 <--- Must on DWORD */ + int isSync; /* offset 16 */ + int parmLen; /* offset 20 */ + char* parmP; /* offset 24 <-- Must on DWORD */ +} gpfs_lwe_event_t; + + + +/* + * Define light weight access rights + */ +#define GPFS_LWE_RIGHT_NULL 0 +#define GPFS_LWE_RIGHT_SHARED 1 +#define GPFS_LWE_RIGHT_EXCL 2 + + +/* Flag indicating whether to wait + * when requesting a right or an event + */ +#define GPFS_LWE_FLAG_NONE 0 +#define GPFS_LWE_FLAG_WAIT 1 + + + + + +/* NAME: gpfs_lwe_create_session() + * + * FUNCTION: create a light weight event session + * + * Input: oldsid: existing session id, + * Set to GPFS_LWE_NO_SESSION to start new session + * - If a session with the same name and id already exists + * it is not terminated, nor will outstanding events + * be redelivered. This is typically used if a session + * is shared between multiple processes. + * Set to an existing session's id to resume that session + * - If a session with the same name exists, that session + * will be terminated. All pending/outstanding events + * for the old session will be redelivered on the new one. + * This is typically used to take over a session from a + * failed/hung process. + * sessinfop: session string, unique for each session + * + * Output: newsidp: session id for new session + * + * Returns: 0 Success + * -1 Failure + * + * Errno: ENOSYS Function not available + * EINVAL invalid parameters + * ENFILE maximum number of sessions have already been created + * ENOMEM insufficient memory to create new session + * ENOENT session to resume does not exist + * EEXIST session to resume exists with different id + * EPERM Caller does not hold appropriate privilege + */ +int GPFS_API +gpfs_lwe_create_session(gpfs_lwe_sessid_t oldsid, /* IN */ + char *sessinfop, /* IN */ + gpfs_lwe_sessid_t *newsidp); /* OUT */ + +#define GPFS_MAX_LWE_SESSION_INFO_LEN 100 + + + +/* NAME: gpfs_lwe_destroy_session() + * + * FUNCTION: destroy a light weight event session + * + * Input: sid: id of the session to be destroyed + * + * Returns: 0 Success + * -1 Failure + * + * Errno: ENOSYS Function not available + * EINVAL sid invalid + * EBUSY session is busy + * EPERM Caller does not hold appropriate privilege + */ +int GPFS_API +gpfs_lwe_destroy_session(gpfs_lwe_sessid_t sid); /* IN */ + + + + +/* NAME: gpfs_lwe_getall_sessions() + * + * FUNCTION: fetch all lwe sessions + * + * Input: nelem: max number of elements + * sidbufp: array of session id + * nelemp: number of session returned in sidbufp + * + * Returns: 0 Success + * -1 Failure + * + * Errno: ENOSYS Function not available + * EINVAL pass in args invalid + * E2BIG information is too large + * EPERM Caller does not hold appropriate privilege + */ +int GPFS_API +gpfs_lwe_getall_sessions(unsigned int nelem, /* IN */ + gpfs_lwe_sessid_t *sidbufp, /* OUT */ + unsigned int *nelemp); /* OUT */ + + +/* NAME: gpfs_lw_query_session() + * + * FUNCTION: query session string by id + * + * Input: sid: id of session to be queryed + * buflen: length of buffer + * bufp: buffer to store sessions string + * rlenp: returned length of bufp + * + * Returns: 0 Success + * -1 Failure + * + * Errno: ENOSYS Function not available + * EINVAL pass in args invalid + * E2BIG information is too large + * EPERM Caller does not hold appropriate privilege + */ +int GPFS_API +gpfs_lwe_query_session(gpfs_lwe_sessid_t sid, /* IN */ + size_t buflen, /* IN */ + void *bufp, /* OUT */ + size_t *rlenP); /* OUT */ + + +/* NAME: gpfs_lwe_get_events() + * + * FUNCTION: get events from a light weight session + * + * Input: sid: id of the session + * maxmsgs: max number of event to fetch, + * 0 to fetch all possible + * flags: GPFS_LWE_EV_WAIT: waiting for new events if event + * queue is empty + * buflen: length of the buffer + * bufp: buffer to hold events + * rlenp: returned length of bufp + * + * Returns: 0 Success + * E2BIG information is too large + * EINVAL pass in args invalid + */ +int GPFS_API +gpfs_lwe_get_events(gpfs_lwe_sessid_t sid, /* IN */ + unsigned int maxmsgs, /* IN */ + unsigned int flags, /* IN */ + size_t buflen, /* IN */ + void *bufp, /* OUT */ + size_t *rlenp); /* OUT */ + +/* NAME: gpfs_lwe_respond_event() + * + * FUNCTION: response to a light weight event + * + * Input: sid: id of the session + * token: token of the event + * response: response to the event + * reterror: return error to event callers + * + * Returns: 0 Success + * EINVAL pass in args invalid + * + */ +int GPFS_API +gpfs_lwe_respond_event(gpfs_lwe_sessid_t sid, /* IN */ + gpfs_lwe_token_t token, /* IN */ + gpfs_lwe_resp_t response, /* IN */ + int reterror); /* IN */ + + +/* NAME: gpfs_lwe_request_right + * + * FUNCTION: Request an access right to a file using a dmapi handle + * + * Input: sid Id of lw session + * hanp Pointer to dmapi handle + * hlen Length of dmapi handle + * right Shared or exclusive access requested + * flags Caller will wait to acquire access if necessary + * + * Output: token Unique identifier for access right + * + * Returns: 0 Success + * -1 Failure + * + * Errno: ENOSYS Function not available + * ESTALE GPFS not available + * EINVAL Invalid arguments + * EFAULT Invalid pointer provided + * EBADF Bad file + * ENOMEM Uable to allocate memory for request + * EPERM Caller does not hold appropriate privilege + * EAGAIN flags parameter did not include WAIT + * and process would be blocked + * + */ +int GPFS_API +gpfs_lwe_request_right(gpfs_lwe_sessid_t sid, /* IN */ + void *hanp, /* IN */ + size_t hlen, /* IN */ + unsigned int right, /* IN */ + unsigned int flags, /* IN */ + gpfs_lwe_token_t *token); /* OUT */ + + +/* NAME: gpfs_lwe_upgrade_right + * + * FUNCTION: Upgrade an access right from shared to exclusive + * + * This is a non-blocking call to upgrade an access right + * from shared to exclusive. If the token already conveys + * exclusive access this call returns imediately with sucess. + * If another process also holds a shared access right + * this call fails with EBUSY to avoid deadlocks. + * + * Input: sid Id of lw session + * hanp Pointer to dmapi handle + * hlen Length of dmapi handle + * token Unique identifier for access right + * + * Output: None + * + * Returns: 0 Success + * -1 Failure + * + * Errno: ENOSYS Function not available + * ESTALE GPFS not available + * EINVAL Invalid arguments + * EINVAL The token is invalid + * EFAULT Invalid pointer provided + * EPERM Caller does not hold appropriate privilege + * EPERM Token's right is not shared or exclusive + * EBUSY Process would be blocked + * + */ +int GPFS_API +gpfs_lwe_upgrade_right(gpfs_lwe_sessid_t sid, /* IN */ + void *hanp, /* IN */ + size_t hlen, /* IN */ + gpfs_lwe_token_t token); /* IN */ + + +/* NAME: gpfs_lwe_downgrade_right + * + * FUNCTION: Downgrade an access right from exclusive to shared + * + * This reduces an access right from exclusive to shared + * without dropping the exclusive right to acquire the shared. + * The token must convey exclusive right before the call. + * + * Input: sid Id of lw session + * hanp Pointer to dmapi handle + * hlen Length of dmapi handle + * token Unique identifier for access right + * + * Output: None + * + * Returns: 0 Success + * -1 Failure + * + * Errno: ENOSYS Function not available + * ESTALE GPFS not available + * EINVAL Invalid arguments + * EINVAL The token is invalid + * EFAULT Invalid pointer provided + * EPERM Caller does not hold appropriate privilege + * EPERM Token's right is not exclusive + * + */ +int GPFS_API +gpfs_lwe_downgrade_right(gpfs_lwe_sessid_t sid, /* IN */ + void *hanp, /* IN */ + size_t hlen, /* IN */ + gpfs_lwe_token_t token); /* IN */ + + +/* NAME: gpfs_lwe_release_right + * + * FUNCTION: Release an access right conveyed by a token + * + * This releases the access right held by a token + * and invalidates the token. Once the access right + * is released the token cannot be reused. + * + * Input: sid Id of lw session + * hanp Pointer to dmapi handle + * hlen Length of dmapi handle + * token Unique identifier for access right + * + * Output: None + * + * Returns: 0 Success + * -1 Failure + * + * Errno: ENOSYS Function not available + * ESTALE GPFS not available + * EINVAL Invalid arguments + * EINVAL The token is invalid + * EFAULT Invalid pointer provided + * EPERM Caller does not hold appropriate privilege + */ +int GPFS_API +gpfs_lwe_release_right(gpfs_lwe_sessid_t sid, /* IN */ + void *hanp, /* IN */ + size_t hlen, /* IN */ + gpfs_lwe_token_t token); /* IN */ + + +/* NAME: gpfs_lwe_getattrs() + * + * FUNCTION: Retrieves all extended file attributes in opaque format. + * This function together with gpfs_lwe_putattrs is intended for + * use by a backup program to save (gpfs_lwe_getattrs) and + * restore (gpfs_lwe_putattrs) all extended file attributes + * (ACLs, user attributes, ...) in one call. + * + * NOTE: This call is the lwe equivalent of gpfs_igetattrsx + * but uses a file handle to identify the file + * and an existing LWE token for locking it. + * + * + * Input: sid Id of lw session + * hanp Pointer to dmapi handle + * hlen Length of dmapi handle + * token Unique identifier for access right + * flags Define behavior of get attributes + * GPFS_ATTRFLAG_NO_PLACEMENT - file attributes for placement + * are not saved, neither is the current storage pool. + * GPFS_ATTRFLAG_IGNORE_POOL - file attributes for placement + * are saved, but the current storage pool is not. + * GPFS_ATTRFLAG_INCL_DMAPI - file attributes for dmapi are + * included in the returned buffer + * GPFS_ATTRFLAG_INCL_ENCR - file attributes for encryption + * are included in the returned buffer + * + * buffer: pointer to buffer for returned attributes + * bufferSize: size of buffer + * attrSize: ptr to returned size of attributes + * + * Returns: 0 Successful + * -1 Failure + * + * Errno: ENOSYS function not available + * EINVAL Not a GPFS file + * EINVAL invalid flags provided + * ENOSPC buffer too small to return all attributes + * *attrSizeP will be set to the size necessary + */ +int GPFS_API +gpfs_lwe_getattrs(gpfs_lwe_sessid_t sid, + void *hanp, + size_t hlen, + gpfs_lwe_token_t token, + int flags, + void *buffer, + int bufferSize, + int *attrSize); + + +/* NAME: gpfs_lwe_putattrs() + * + * FUNCTION: Sets all extended file attributes of a file. + * + * This routine can optionally invoke the policy engine + * to match a RESTORE rule using the file's attributes saved + * in the extended attributes to set the file's storage pool and + * data replication as when calling gpfs_fputattrswithpathname. + * When used with the policy the caller should include the + * full path to the file, including the file name, to allow + * rule selection based on file name or path. + * + * By default, the routine will not use RESTORE policy rules + * for data placement. The pathName parameter will be ignored + * and may be set to NULL. + * + * If the call does not use RESTORE policy rules, or if the + * file fails to match a RESTORE rule, or if there are no + * RESTORE rules installed, then the storage pool and data + * replication are selected as when calling gpfs_fputattrs(). + * + * The buffer passed in should contain extended attribute data + * that was obtained by a previous call to gpfs_fgetattrs. + * + * pathName is a UTF-8 encoded string. On Windows, applications + * can convert UTF-16 ("Unicode") to UTF-8 using the platforms + * WideCharToMultiByte function. + * + * NOTE: This call is the lwe equivalent of gpfs_iputaattrsx + * but uses a file handle to identify the file + * and an existing LWE token for locking it. + * + * + * Input: sid Id of lw session + * hanp Pointer to dmapi handle + * hlen Length of dmapi handle + * token Unique identifier for access right + * flags Define behavior of put attributes + * GPFS_ATTRFLAG_NO_PLACEMENT - file attributes are restored + * but the storage pool and data replication are unchanged + * GPFS_ATTRFLAG_IGNORE_POOL - file attributes are restored + * but the storage pool and data replication are selected + * by matching the saved attributes to a placement rule + * instead of restoring the saved storage pool. + * GPFS_ATTRFLAG_USE_POLICY - file attributes are restored + * but the storage pool and data replication are selected + * by matching the saved attributes to a RESTORE rule + * instead of restoring the saved storage pool. + * GPFS_ATTRFLAG_FINALIZE_ATTRS - file attributes that are restored + * after data is retored. If file is immutable/appendOnly + * call without this flag before restoring data + * then call with this flag after restoring data + * GPFS_ATTRFLAG_INCL_ENCR - file attributes for encryption + * are restored. Note that this may result in the file's + * File Encryption Key (FEK) being changed, and in this + * case any prior content in the file is effectively lost. + * This option should only be used when the entire file + * content is restored after the attributes are restored. + * + * buffer: pointer to buffer for returned attributes + * pathName: pointer to file path and file name for file + * May be set to NULL. + * + * Returns: 0 Successful + * -1 Failure and errno is set + * + * Errno: ENOSYS function not available + * EINVAL the buffer does not contain valid attribute data + * EINVAL invalid flags provided + * EPERM caller must have superuser privilege + * ESTALE cached fs information was invalid + * GPFS_E_INVAL_IFILE bad ifile parameters + */ +int GPFS_API +gpfs_lwe_putattrs(gpfs_lwe_sessid_t sid, + void *hanp, + size_t hlen, + gpfs_lwe_token_t token, + int flags, + void *buffer, + const char *pathName); + + + +const char* GPFS_API +gpfs_get_fspathname_from_fsname(const char* fsname_or_path); +/* Check that fsname_or_path refers to a GPFS file system and find the path to its root + Return a strdup()ed copy of the path -OR- NULL w/errno +*/ + +int GPFS_API +/* experimental */ +gpfs_qos_getstats( + const char *fspathname, /* in only: path to file system*/ + unsigned int options, /* in only: option flags: 0=begin at specified qip, 1=begin after qip */ + unsigned int qosid, /* in only: 0 or a specific qosid at which to start or continue */ + gpfs_pool_t poolid, /* in only: -1 or a specific poolid at which to start or continue */ + unsigned int mqips, /* in only: max number of qip=(qosid,poolid) histories to retrieve */ + unsigned int nslots, /* in only: max number of time slots of history to retrieve */ + void *bufferP, /* ptr to return stat structures */ + unsigned int bufferSize); /* sizeof stat buffer or 0 */ + +int GPFS_API +/* experimental */ +gpfs_qos_control( + const char *fspathname, /* in only: path to file system*/ + void *bufferP, /* in/out control/get/set structs */ + unsigned int bufferSize); + +int GPFS_API +gpfs_qos_set( + const char *fspathname, + const char *classname, /* "gold", "silver", or .. "1" or "2" .. */ + int id, /* process id or pgrp or userid */ + int which, /* process, pgrp or user */ + double* qshareP); /* return the share, percentage or when negative IOP limit */ +/* if id==0 then getpid() or getpgrp() or getuid() + if which==0 or 1 then process, if 2 process then group, if 3 then userid + Return -1 on error, with errno= + ENOSYS if QOS is not available in the currently installed GPFS software. + ENOENT if classname is not recognized. + ENXIO if QOS throttling is not active + (but classname is recognized and *qshareP has configured value) +*/ + +/* For the given process get QOS info */ +int GPFS_API +gpfs_qos_get( + const char *fspathname, + int *classnumP, + char classname[18], /* "gold", "silver", or .. "1" or "2" .. */ + int id, /* process id or pgrp or userid */ + int which, /* process, pgrp or user */ + double* qshareP); /* return the share, percentage or when negative IOP limit */ + +/* given classname, set *classnumP and set *qshareP + Return -1 on error, with errno= + ENOSYS if QOS is not available in the currently installed GPFS software. + ENOENT if classname is not recognized. + ENXIO if QOS throttling is not active + (but classname is recognized, *classnumP and *qshareP have configured values) +*/ +int GPFS_API +gpfs_qos_lkupName( + const char *fspathname, + int *classnumP, + const char *classname, + double* qshareP); + +/* given classnumber, find name and share (similar to above), but start with number instead of name */ +int GPFS_API +gpfs_qos_lkupVal( + const char *fspathname, + int val, + char classname[18], + double* qshareP); + +int GPFS_API +gpfs_ioprio_set(int,int,int); /* do not call directly */ + +int GPFS_API +gpfs_ioprio_get(int,int); /* do not call directly */ + + +/* NAME: gpfs_enc_file_rewrap_key() + * + * FUNCTION: Re-wrap the File Encryption Key (FEK) for the file, + * replacing the usage of the original (second parameter) + * Master Encryption Key (MEK) with the new key provided as + * the third parameter. The content of the file remains intact. + * + * If the FEK is not currently being wrapped with the MEK + * identified by the second parameter then no action is taken. + * + * This function is normally invoked before the original MEK is + * removed. + * + * The file may be opened in read-only mode for this function + * to perform the key rewrap. + * + * Superuser privilege is required to invoke this API. + * + * INPUT: fileDesc: File descriptor for file whose key is to be rewrapped + * orig_key_p: Key ID for the key (MEK) to be replaced + * new_key_p: Key ID for the new key (MEK) to be used + * + * OUTPUT: N/A + * + * Returns: 0 success + * -1 failure + * + * Errno: + * EACCESS Existing or new key cannot be retrieved + * The new key is already being used to wrap the + * file's FEK + * EBADF Bad file descriptor + * EINVAL Arguments are invalid: key format is incorrect + * EFAULT An invalid pointer is supplied; the associated + * data could not be copied in or out of the kernel + * E2BIG Key IDs provided are too long + * ENOSYS Function not available (cluster or file system not + * enabled for encryption) + * EPERM File is in a snapshot + * Caller must have superuser privilege + */ + +/* The Key ID is a string comprised of the key ID and the remote key + server RKM ID, separated by ':' */ +typedef const char *gpfs_enc_key_id_t; /* " : " */ + +int GPFS_API +gpfs_enc_file_rewrap_key(gpfs_file_t fileDesc, + gpfs_enc_key_id_t orig_key_p, + gpfs_enc_key_id_t new_key_p); + + +/* NAME: gpfs_enc_get_algo() + * + * FUNCTION: Retrieve a string describing the encryption algorithm, key + * length, Master Encryption Key(s) ID, and wrapping and combining + * mechanisms used for the file. + * + * INPUT: fileDesc: File descriptor for file whose encryption + * algorithm is being retrieved + * encryption_xattrP: content of the gpfs.Encryption + * extended attribute, retrieved by a call to + * gpfs_fcntl (with structure type GPFS_FCNTL_GET_XATTR) + * xattr_len: length of the data in encryption_xattrP + * algo_txt_size: space reserved by the caller for algo_txtP + * + * OUTPUT: algo_txtP: NULL-terminated string describing the + * encryption for the file + * + * Returns: 0 success + * -1 failure + * + * Errno: + * ENOENT File not found + * EBADF Bad file handle, not a GPFS file + * EACCESS Permission denied + * EFAULT Bad address provided + * EINVAL Not a regular file + * EINVAL Invalid values for xattr_len or algo_txt_size + * EINVAL Invalid content of encryption extended attribute + * ENOSYS Function not available + * E2BIG Output string does not fit in algo_txtP + */ + +int GPFS_API +gpfs_enc_get_algo(gpfs_file_t fileDesc, + const char *encryption_xattrP, + int xattr_len, + char *algo_txtP, + int algo_txt_size); + + +/* NAME: gpfs_init_trace() + * + * FUNCTION: Initialize the GPFS trace facility and start to use it. + * Must be called before calling gpfs_add_trace(). + * + * Returns: 0 Success + * -1 Failure + * + * Errno: ENOENT file not found + * ENOMEM Memory allocation failed + * EACCESS Permission denied + * ENFILE Too many open files + * ENOSYS Function not available + */ +int GPFS_API +gpfs_init_trace(void); + +/* NAME: gpfs_query_trace() + * + * FUNCTION: Query and cache the latest settings of GPFS trace facility. + * Generally this should be called by the notification handler + * for the "traceConfigChanged" event, which is invoked when + * something changes in the configuration of the trace facility. + * + * Returns: 0 Success + * -1 Failure + * + * Errno: ENOENT file not found + * ENOMEM Memory allocation failed + * EACCESS Permission denied + * ENFILE Too many open files + * ENOSYS Function not available + */ +int GPFS_API +gpfs_query_trace(void); + +/* NAME: gpfs_add_trace() + * + * FUNCTION: write the logs into GPFS trace driver. When the user specified + * parameter "level" is less than or equal to the GPFS trace level, + * the log message pointed to by parameter "msg" would be written to + * GPFS trace buffer, and user can use mmtracectl command to cut + * the GPFS trace buffer into a file to observe. Must be called after + * the call to gpfs_init_trace(). Also ensure the gpfs_query_trace() + * is called properly to update the gpfs trace level cached in + * application, otherwise, the trace may miss to write down to + * GPFS trace driver. + * + * Input: level: the level for this trace generation. When the level + * is less than or equal to the GPFS trace level, this + * trace record would be written to GPFS trace buffer. + * msg: the message string that would be put into GPFS trace buffer. + * + * Returns: None. + */ +void GPFS_API +gpfs_add_trace(int level, const char *msg); + +/* NAME: gpfs_fini_trace() + * + * FUNCTION: Stop using GPFS trace facility. This should be paired with + * gpfs_init_trace(), and must be called after the last + * gpfs_add_trace(). + * + * Returns: None. + */ + +void gpfs_fini_trace(void); + +/* + * When GPFS_64BIT_INODES is defined, use the 64-bit interface definitions as + * the default. + */ + +#ifdef GPFS_64BIT_INODES + #undef GPFS_D_VERSION + #define GPFS_D_VERSION GPFS_D64_VERSION + #undef GPFS_IA_VERSION + #define GPFS_IA_VERSION GPFS_IA64_VERSION + + #define gpfs_ino_t gpfs_ino64_t + #define gpfs_gen_t gpfs_gen64_t + #define gpfs_uid_t gpfs_uid64_t + #define gpfs_gid_t gpfs_gid64_t + #define gpfs_snapid_t gpfs_snapid64_t + #define gpfs_nlink_t gpfs_nlink64_t + #define gpfs_timestruc_t gpfs_timestruc64_t + #define gpfs_direntx_t gpfs_direntx64_t + #define gpfs_direntx gpfs_direntx64 + #define gpfs_iattr_t gpfs_iattr64_t + + #define gpfs_get_snapid_from_fssnaphandle gpfs_get_snapid_from_fssnaphandle64 + #define gpfs_open_inodescan gpfs_open_inodescan64 + #define gpfs_open_inodescan_with_xattrs gpfs_open_inodescan_with_xattrs64 + #define gpfs_next_inode gpfs_next_inode64 + #define gpfs_next_inode_with_xattrs gpfs_next_inode_with_xattrs64 + #define gpfs_seek_inode gpfs_seek_inode64 + #define gpfs_stat_inode gpfs_stat_inode64 + #define gpfs_stat_inode_with_xattrs gpfs_stat_inode_with_xattrs64 + #define gpfs_iopen gpfs_iopen64 + #define gpfs_ireaddir gpfs_ireaddir64 + #define gpfs_ireaddirx gpfs_ireaddirx64 + #define gpfs_iwritedir gpfs_iwritedir64 + #define gpfs_ireadlink gpfs_ireadlink64 +#endif + +#define gpfs_icreate gpfs_icreate64 + +#ifdef __cplusplus +} +#endif + +#endif /* H_GPFS */ -- cgit v1.2.1