packaging: Remove LSB packaging

This hasn't been touched since 2001.

Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>

5 files changed, 0 insertions, 486 deletions

diff --git a/packaging/LSB/README b/packaging/LSB/README
deleted file mode 100644
index 4ff0b99d769..00000000000
--- a/packaging/LSB/README
+++ /dev/null
@@ -1,6 +0,0 @@
-README.lsb - 1 July 2001
-------------------------
-
-The files in this directory allow you to build an LSB-compliant
-version of SAMBA using the RPM software and the LSB development
-environment.
diff --git a/packaging/LSB/lsb-samba.spec b/packaging/LSB/lsb-samba.spec
deleted file mode 100644
index 516eaa430eb..00000000000
--- a/packaging/LSB/lsb-samba.spec
+++ /dev/null
@@ -1,100 +0,0 @@
-#
-# "$Id: lsb-samba.spec,v 1.2 2001/07/03 01:01:12 jra Exp $"
-#
-#   Linux Standards Based RPM "spec" file for SAMBA.
-#
-
-Summary: SAMBA
-Name: lsb-samba
-Version: 2.2.1
-Release: 0
-Copyright: GPL
-Group: System Environment/Daemons
-Source: ftp://ftp.samba.org/pub/samba/samba-%{version}.tar.gz
-Url: http://www.samba.org
-Packager: Michael Sweet <mike@easysw.com>
-Vendor: SAMBA Team
-
-# Require the "lsb" package, which guarantees LSB compliance.
-Requires: lsb
-
-# use BuildRoot so as not to disturb the version already installed
-BuildRoot: /var/tmp/%{name}-root
-
-%description
-
-%prep
-%setup
-
-%build
-export LDFLAGS="-L/usr/lib/lsb --dynamic-linker=/lib/ld-lsb.so.1"
-
-./configure --with-fhs  --prefix=/usr --sysconfdir=/etc \
-            --sharedstatedir=/var --datadir=/usr/share \
-            --with-configdir=/etc/samba \
-            --with-swatdir=/usr/share/samba/swat
-
-# If we got this far, all prerequisite libraries must be here.
-make
-
-%install
-# Make sure the RPM_BUILD_ROOT directory exists.
-rm -rf $RPM_BUILD_ROOT
-mkdir $RPM_BUILD_ROOT
-
-make \
-	BASEDIR=$RPM_BUILD_ROOT/usr \
-	BINDIR=$RPM_BUILD_ROOT/usr/bin \
-	CODEPAGEDIR=$RPM_BUILD_ROOT/usr/share/samba/codepages \
-	CONFIGDIR=$RPM_BUILD_ROOT/etc/samba \
-	INCLUDEDIR=$RPM_BUILD_ROOT/usr/include \
-	LIBDIR=$RPM_BUILD_ROOT/usr/lib \
-	LOCKDIR=$RPM_BUILD_ROOT/var/lock/samba \
-	LOGFILEBASE=$RPM_BUILD_ROOT/var/log/samba \
-	MANDIR=$RPM_BUILD_ROOT/usr/share/man \
-	SBINDIR=$RPM_BUILD_ROOT/usr/sbin \
-	SWATDIR=$RPM_BUILD_ROOT/usr/share/samba/swat \
-	VARDIR=$RPM_BUILD_ROOT/var \
-	install
-
-mkdir -p $RPM_BUILD_ROOT/etc/init.d
-install -m 700 packaging/LSB/samba.sh /etc/init.d/samba
-
-mkdir -p $RPM_BUILD_ROOT/etc/samba
-install -m 644 packaging/LSB/smb.conf /etc/samba
-
-mkdir -p $RPM_BUILD_ROOT/etc/xinetd.d
-install -m 644 packaging/LSB/samba.xinetd /etc/xinetd.d/samba
-
-%post
-/usr/lib/lsb/install_initd /etc/init.d/samba
-
-%preun
-/usr/lib/lsb/remove_initd /etc/init.d/samba
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%files
-%defattr(-,root,root)
-%dir /etc/init.d
-/etc/init.d/samba
-%dir /etc/samba
-%config(noreplace) /etc/samba/smb.conf
-%dir /etc/samba/private
-%dir /etc/xinetd.d
-%config(noreplace) /etc/xinetd.d/samba
-%dir /usr/bin
-/usr/bin/*
-%dir /usr/sbin
-/usr/sbin/*
-%dir /usr/share/man
-/usr/share/man/*
-%dir /usr/share/samba
-/usr/share/samba/*
-%dir /var/lock/samba
-%dir /var/log/samba
-
-#
-# End of "$Id: lsb-samba.spec,v 1.2 2001/07/03 01:01:12 jra Exp $".
-#
diff --git a/packaging/LSB/samba.sh b/packaging/LSB/samba.sh
deleted file mode 100755
index 99fa1b0117d..00000000000
--- a/packaging/LSB/samba.sh
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/sh
-#
-# "$Id: samba.sh,v 1.2 2001/07/03 01:01:12 jra Exp $"
-#
-# SAMBA startup (init) script for LSB-compliant systems.
-#
-# Provides: smbd nmbd
-# Required-Start: 3 5
-# Required-Stop: 0 2 1 6
-# Default-Start: 3 5
-# Default-Stop: 0 2 1 6
-# Description: Starts and stops the SAMBA smbd and nmbd daemons \
-#              used to provide SMB network services.
-# 
-
-# Source LSB function library.
-. /lib/lsb/init-functions
-
-# Check that smb.conf exists.
-if test ! -f /etc/samba/smb.conf; then
-	log_failure_msg "The smb.conf file does not exist."
-	exit 6
-fi
-
-# Make sure that smbd and nmbd exist...
-if test ! -f /usr/sbin/nmbd -o ! -f /usr/sbin/smbd; then
-	log_failure_msg "The nmbd and/or smbd daemons are not installed."
-	exit 5
-fi
-
-# See how we were called.
-case "$1" in
-	start)
-		start_daemon nmbd -D 
-		start_daemon smbd -D 	
-		log_success_msg "Started SMB services."
-		;;
-
-	stop)
-		killproc smbd
-		killproc nmbd
-		log_success_msg "Shutdown SMB services."
-		;;
-
-	reload)
-		# smbd and nmbd automatically re-read the smb.conf file...
-		log_success_msg "Reload not necessary with SAMBA."
-		;;
-
-	status)
-		if test -z "`pidofproc smbd`"; then
-			log_success_msg "smbd is not running."
-		else
-			log_success_msg "smbd is running."
-		fi
-		if test -z "`pidofproc nmbd`"; then
-			log_success_msg "nmbd is not running."
-		else
-			log_success_msg "nmbd is running."
-		fi
-		;;
-
-
-	restart | force-reload)
-		$0 stop
-		$0 start
-		;;
-
-	*)
-		echo "Usage: smb {start|stop|reload|force-reload|restart|status}"
-		exit 1
-		;;
-esac
-
-# Return "success"
-exit 0
-
-#
-# End of "$Id: samba.sh,v 1.2 2001/07/03 01:01:12 jra Exp $".
-#
diff --git a/packaging/LSB/samba.xinetd b/packaging/LSB/samba.xinetd
deleted file mode 100644
index 8c38b354218..00000000000
--- a/packaging/LSB/samba.xinetd
+++ /dev/null
@@ -1,15 +0,0 @@
-# default: off
-# description: SWAT is the Samba Web Admin Tool. Use swat \
-#	       to configure your Samba server. To use SWAT, \
-#	       connect to port 901 with your favorite web browser.
-service swat
-{
-	port	= 901
-	socket_type	= stream
-	wait 	= no
-	only_from = localhost
-	user	= root
-	server	= /usr/sbin/swat
-	log_on_failure	+= USERID
-	disable = yes
-}
diff --git a/packaging/LSB/smb.conf b/packaging/LSB/smb.conf
deleted file mode 100644
index 36c9839346e..00000000000
--- a/packaging/LSB/smb.conf
+++ /dev/null
@@ -1,285 +0,0 @@
-# This is the main Samba configuration file. You should read the
-# smb.conf(5) manual page in order to understand the options listed
-# here. Samba has a huge number of configurable options (perhaps too
-# many!) most of which are not shown in this example
-#
-# Any line which starts with a ; (semi-colon) or a # (hash) 
-# is a comment and is ignored. In this example we will use a #
-# for commentry and a ; for parts of the config file that you
-# may wish to enable
-#
-# NOTE: Whenever you modify this file you should run the command "testparm"
-# to check that you have not made any basic syntactic errors. 
-#
-#======================= Global Settings =====================================
-[global]
-
-# workgroup = NT-Domain-Name or Workgroup-Name
-   workgroup = MYGROUP
-
-# server string is the equivalent of the NT Description field
-   server string = Samba Server
-
-# This option is important for security. It allows you to restrict
-# connections to machines which are on your local network. The
-# following example restricts access to two C class networks and
-# the "loopback" interface. For more examples of the syntax see
-# the smb.conf man page
-;   hosts allow = 192.168.1. 192.168.2. 127.
-
-# if you want to automatically load your printer list rather
-# than setting them up individually then you'll need this
-   printcap name = /etc/printcap
-   load printers = yes
-
-# It should not be necessary to spell out the print system type unless
-# yours is non-standard. Currently supported print systems include:
-# bsd, sysv, plp, lprng, aix, hpux, qnx
-;   printing = bsd
-
-# Uncomment this if you want a guest account, you must add this to /etc/passwd
-# otherwise the user "nobody" is used
-;  guest account = pcguest
-
-# this tells Samba to use a separate log file for each machine
-# that connects
-   log file = /var/log/samba/log.%m
-
-# Put a capping on the size of the log files (in Kb).
-   max log size = 50
-
-# Security mode. Most people will want user level security. See
-# security_level.txt for details.
-   security = user
-# Use password server option only with security = server
-;   password server = <NT-Server-Name>
-
-# Password Level allows matching of _n_ characters of the password for
-# all combinations of upper and lower case.
-;  username level = 8
-
-# You may wish to use password encryption. Please read
-# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
-# Do not enable this option unless you have read those documents
-;  encrypt passwords = yes
-;  smb passwd file = /etc/samba/smbpasswd
-
-# The following are needed to allow password changing from Windows to
-# update the Linux sytsem password also.
-# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
-# NOTE2: You do NOT need these to allow workstations to change only
-#        the encrypted SMB passwords. They allow the Unix password
-#        to be kept in sync with the SMB password.
-;  unix password sync = Yes
-;  passwd program = /usr/bin/passwd %u
-;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
-
-# Unix users can map to different SMB User names
-;  username map = /etc/samba/smbusers
-
-# Using the following line enables you to customise your configuration
-# on a per machine basis. The %m gets replaced with the netbios name
-# of the machine that is connecting
-;   include = /etc/samba/smb.conf.%m
-
-# Configure Samba to use multiple interfaces
-# If you have multiple network interfaces then you must list them
-# here. See the man page for details.
-;   interfaces = 192.168.12.2/24 192.168.13.2/24 
-
-# Configure remote browse list synchronisation here
-#  request announcement to, or browse list sync from:
-#	a specific host or from / to a whole subnet (see below)
-;   remote browse sync = 192.168.3.25 192.168.5.255
-# Cause this host to announce itself to local subnets here
-;   remote announce = 192.168.1.255 192.168.2.44
-
-# Browser Control Options:
-# set local master to no if you don't want Samba to become a master
-# browser on your network. Otherwise the normal election rules apply
-;   local master = no
-
-# OS Level determines the precedence of this server in master browser
-# elections. The default value should be reasonable
-;   os level = 33
-
-# Domain Master specifies Samba to be the Domain Master Browser. This
-# allows Samba to collate browse lists between subnets. Don't use this
-# if you already have a Windows NT domain controller doing this job
-;   domain master = yes 
-
-# Preferred Master causes Samba to force a local browser election on startup
-# and gives it a slightly higher chance of winning the election
-;   preferred master = yes
-
-# Use only if you have an NT server on your network that has been
-# configured at install time to be a primary domain controller.
-;   domain controller = <NT-Domain-Controller-SMBName>
-
-# Enable this if you want Samba to be a domain logon server for 
-# Windows95 workstations. 
-;   domain logons = yes
-
-# if you enable domain logons then you may want a per-machine or
-# per user logon script
-# run a specific logon batch file per workstation (machine)
-;   logon script = %m.bat
-# run a specific logon batch file per username
-;   logon script = %U.bat
-
-# Where to store roving profiles (only for Win95 and WinNT)
-#        %L substitutes for this servers netbios name, %U is username
-#        You must uncomment the [Profiles] share below
-;   logon path = \\%L\Profiles\%U
-
-# All NetBIOS names must be resolved to IP Addresses
-# 'Name Resolve Order' allows the named resolution mechanism to be specified
-# the default order is "host lmhosts wins bcast". "host" means use the unix
-# system gethostbyname() function call that will use either /etc/hosts OR
-# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
-# and the /etc/resolv.conf file. "host" therefore is system configuration
-# dependant. This parameter is most often of use to prevent DNS lookups
-# in order to resolve NetBIOS names to IP Addresses. Use with care!
-# The example below excludes use of name resolution for machines that are NOT
-# on the local network segment
-# - OR - are not deliberately to be known via lmhosts or via WINS.
-; name resolve order = wins lmhosts bcast
-
-# Windows Internet Name Serving Support Section:
-# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
-;   wins support = yes
-
-# WINS Server - Tells the NMBD components of Samba to be a WINS Client
-#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
-;   wins server = w.x.y.z
-
-# WINS Proxy - Tells Samba to answer name resolution queries on
-# behalf of a non WINS capable client, for this to work there must be
-# at least one	WINS Server on the network. The default is NO.
-;   wins proxy = yes
-
-# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
-# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
-# this has been changed in version 1.9.18 to no.
-   dns proxy = no 
-
-# Case Preservation can be handy - system default is _no_
-# NOTE: These can be set on a per share basis
-;  preserve case = no
-;  short preserve case = no
-# Default case is normally upper case for all DOS files
-;  default case = lower
-# Be very careful with case sensitivity - it can break things!
-;  case sensitive = no
-
-#============================ Share Definitions ==============================
-[homes]
-   comment = Home Directories
-   browseable = no
-   writable = yes
-
-# Un-comment the following and create the netlogon directory for Domain Logons
-; [netlogon]
-;   comment = Network Logon Service
-;   path = /home/netlogon
-;   guest ok = yes
-;   writable = no
-;   share modes = no
-
-
-# Un-comment the following to provide a specific roving profile share
-# the default is to use the user's home directory
-;[Profiles]
-;    path = /home/profiles
-;    browseable = no
-;    guest ok = yes
-
-
-# NOTE: If you have a BSD-style print system there is no need to 
-# specifically define each individual printer
-[printers]
-   comment = All Printers
-   path = /var/spool/samba
-   browseable = no
-# Set public = yes to allow user 'guest account' to print
-   guest ok = no
-   writable = no
-   printable = yes
-
-# This one is useful for people to share files
-;[tmp]
-;   comment = Temporary file space
-;   path = /tmp
-;   read only = no
-;   public = yes
-
-# A publicly accessible directory, but read only, except for people in
-# the "staff" group
-;[public]
-;   comment = Public Stuff
-;   path = /home/samba
-;   public = yes
-;   read only = yes
-;   write list = @staff
-
-# Other examples. 
-#
-# A private printer, usable only by fred. Spool data will be placed in fred's
-# home directory. Note that fred must have write access to the spool directory,
-# wherever it is.
-;[fredsprn]
-;   comment = Fred's Printer
-;   valid users = fred
-;   path = /homes/fred
-;   printer = freds_printer
-;   public = no
-;   writable = no
-;   printable = yes
-
-# A private directory, usable only by fred. Note that fred requires write
-# access to the directory.
-;[fredsdir]
-;   comment = Fred's Service
-;   path = /usr/somewhere/private
-;   valid users = fred
-;   public = no
-;   writable = yes
-;   printable = no
-
-# a service which has a different directory for each machine that connects
-# this allows you to tailor configurations to incoming machines. You could
-# also use the %u option to tailor it by user name.
-# The %m gets replaced with the machine name that is connecting.
-;[pchome]
-;  comment = PC Directories
-;  path = /usr/pc/%m
-;  public = no
-;  writable = yes
-
-# A publicly accessible directory, read/write to all users. Note that all files
-# created in the directory by users will be owned by the default user, so
-# any user with access can delete any other user's files. Obviously this
-# directory must be writable by the default user. Another user could of course
-# be specified, in which case all files would be owned by that user instead.
-;[public]
-;   path = /usr/somewhere/else/public
-;   public = yes
-;   only guest = yes
-;   writable = yes
-;   printable = no
-
-# The following two entries demonstrate how to share a directory so that two
-# users can place files there that will be owned by the specific users. In this
-# setup, the directory should be writable by both users and should have the
-# sticky bit set on it to prevent abuse. Obviously this could be extended to
-# as many users as required.
-;[myshare]
-;   comment = Mary's and Fred's stuff
-;   path = /usr/somewhere/shared
-;   valid users = mary fred
-;   public = no
-;   writable = yes
-;   printable = no
-;   create mask = 0765
-
-