QXmlPatternistCLI Warning in %1, at line %2, column %3: %4 Varovanie na %1, na riadku %2, stĺpci %3: %4 Warning in %1: %2 Varovanie na %1: %2 Unknown location Neznáme umiestnenie Error %1 in %2, at line %3, column %4: %5 Chyba %1 v %2, na riadku %3, stĺpci %4: %5 Error %1 in %2: %3 Chyba %1 v %2: %3 QtXmlPatterns %1 is an unsupported encoding. %1 je nepodporované kódovanie. %1 contains octets which are disallowed in the requested encoding %2. %1 obsahuje oktety, ktoré sú zakázané v požadovanom kódovaní %2. The codepoint %1, occurring in %2 using encoding %3, is an invalid XML character. Bod kódu %1, vyskytujúci sa v %2 s použitím kódovania %3,nie je platný XML znak. Network timeout. Čas pre sieťovú operáciu vypršal. Element %1 can't be serialized because it appears outside the document element. Element %1 nemôže byť serializovaný, pretože sa navonok javí ako element dokumentu. Attribute %1 can't be serialized because it appears at the top level. Atribút %1 nemôže byť serializovaný, pretože sa zdá byť najvyššej úrovne. Year %1 is invalid because it begins with %2. Rok %1 je nesprávny pretože začína s %2. Day %1 is outside the range %2..%3. Deň %1 je mimo rozsahu %2..%3. Month %1 is outside the range %2..%3. Mesiac %1 je mimo rozsahu %2..%3. Overflow: Can't represent date %1. Pretečenie: Nemôže reprezentovať dátum %1. Day %1 is invalid for month %2. Deň %1 je neplatný pre mesiac %2. Time 24:%1:%2.%3 is invalid. Hour is 24, but minutes, seconds, and milliseconds are not all 0; Čas 24:%1:%2.%3 je neplatný. Hodiny sú 24, ale minúty, sekundy, a milisekundy nie sú všetky 0; Time %1:%2:%3.%4 is invalid. Čas %1:%2:%3.%4 ne je platný. Overflow: Date can't be represented. Pretečenie: Dátum nemôže byť reprezentovaný. At least one component must be present. Najmenej jeden komponent musí byť prítomný. At least one time component must appear after the %1-delimiter. Najmenej jeden časový komponent musí byť vložený po %1-oddeľovači. %1 is not a valid value of type %2. %1 nie je platná hodnota pre typ %2. When casting to %1 from %2, the source value cannot be %3. Pri prevode(casting) z %1 z %2, zdrojová hodnota nemôže byť %3. Integer division (%1) by zero (%2) is undefined. Celočíselné delenie (%1) nulou (%2) je nedefinované. Division (%1) by zero (%2) is undefined. Delenie (%1) nulou (%2) nie je definované. Modulus division (%1) by zero (%2) is undefined. Modulárne delenie (%1) nulou (%2) nie je definované. Dividing a value of type %1 by %2 (not-a-number) is not allowed. Delenie hodnoty typu %1 s %2 (nečíselnou) nie je povolené. Dividing a value of type %1 by %2 or %3 (plus or minus zero) is not allowed. Delenie hodnoty typu %1 s %2 alebo %3 (plus alebo mínus nula) nie je povolené. Multiplication of a value of type %1 by %2 or %3 (plus or minus infinity) is not allowed. Násobenie hodnotou typu %1 s %2 alebo %3 (plus alebo mínus nekonečno) nie je povolené. A value of type %1 cannot have an Effective Boolean Value. Hodnota typu %1 nemôže mať Effective Boolean Value. Effective Boolean Value cannot be calculated for a sequence containing two or more atomic values. Effective Boolean Value nemôže byť vypočítaná pre sekvenciu zloženú z dvoch alebo viac atomických hodnôt. Value %1 of type %2 exceeds maximum (%3). Hodnota %1 typu %2 presahuje maximum (%3). Value %1 of type %2 is below minimum (%3). Hodnota %1 typu %2 je pod minimom (%3). A value of type %1 must contain an even number of digits. The value %2 does not. Hodnota typu %1 musí obsahovať párny počet číslic. Hodnota %2 ich neobsahuje. %1 is not valid as a value of type %2. %1 nie je platné ako hodnota typu %2. Ambiguous rule match. Nejasné pravidlá zhody. Operator %1 cannot be used on type %2. Operátor %1 nemôže byť použitý v type %2. Operator %1 cannot be used on atomic values of type %2 and %3. Operátor %1 nemôže byť použitý v atomických hodnotách typu %2 a %3. The namespace URI in the name for a computed attribute cannot be %1. Menný priestor URI v názve pre počítaný atribút nemôže byť %1. The name for a computed attribute cannot have the namespace URI %1 with the local name %2. Názov počítaného atribútu nemôže mať menný priestor URI %1 s miestnym názvom %2. Type error in cast, expected %1, received %2. Typová chyba v prevode (cast), očakávané %1, prijaté %2. When casting to %1 or types derived from it, the source value must be of the same type, or it must be a string literal. Type %2 is not allowed. Pri prevode (cast) na %1 alebo typoch odvodených od neho, zdrojová hodnota musí byť rovnaký typ, alebo to musí byť reťazcový literál. Typ %2 nie je povolený. A comment cannot contain %1 Komentár nemôže obsahovať %1 A comment cannot end with a %1. Komentár nemôže končiť na %1. In a namespace constructor, the value for a namespace cannot be an empty string. V konštruktore menného priestoru, hodnota pre menný priestor nemôže byť prázdny reťazec. The prefix must be a valid %1, which %2 is not. Prefix musí byť platný %1, kým %2 nie je. The prefix %1 cannot be bound. Prefix %1 nemôže byť viazaná. Only the prefix %1 can be bound to %2 and vice versa. Iba prefix %1 môže byť viazaný na %2 a naopak. An attribute node cannot be a child of a document node. Therefore, the attribute %1 is out of place. Atribút uzlu nemôže byť dcérska hodnota uzlu dokumentu. A preto atribút %1 je nevhodný. A library module cannot be evaluated directly. It must be imported from a main module. Modul knižnice nemôže byť vyhodnotený napriamo. Musí byť importovaný z hlavného modulu. No template by name %1 exists. Šablóna s názvom %1 neexistuje. A value of type %1 cannot be a predicate. A predicate must have either a numeric type or an Effective Boolean Value type. Hodnota typu %1 nemôže byť predikovaná. Predikcia musí mať buď numerický typ alebo Effective Boolean Value typ. A positional predicate must evaluate to a single numeric value. Pozičná predikcia sa musí vyhodnotiť do jednej numerickej hodnoty. The target name in a processing instruction cannot be %1 in any combination of upper and lower case. Therefore, %2 is invalid. Cieľový názov v spracovateľskej inštrukcií nemôže byť %1 v ľubovoľnej kombinácii veľkých a malých písmen. Preto je%2 neplatné. %1 is not a valid target name in a processing instruction. It must be a %2 value, e.g. %3. %1 nie je platný cieľový názov v spracovávateľskej inštrukcií. Musí mať hodnotu %2, napr. %3. The last step in a path must contain either nodes or atomic values. It cannot be a mixture between the two. Posledný krok na ceste musí obsahovať buď uzol alebo atomické hodnoty. Nemôže to byť mix oboch. The data of a processing instruction cannot contain the string %1 Dáta v spracovateľskej inštrukcií nemôžu obsahovať reťazec %1 No namespace binding exists for the prefix %1 Pre prefix %1 neexistujte väzba menného priestoru No namespace binding exists for the prefix %1 in %2 Pre prefix %1 v %2 neexistujte väzba menného priestoru %1 is an invalid %2 %1 je neplatné %2 The parameter %1 is passed, but no corresponding %2 exists. Parameter %1 je odovzdaný, ale neexistuje zodpovedajúce %2. The parameter %1 is required, but no corresponding %2 is supplied. Parameter %1 je vyžadovaný, ale zodpovedajúce %2 nebolo poskytnuté. %1 takes at most %n argument(s). %2 is therefore invalid. %1 zoberie najviac %n argument. Preto je %2 neplatné. %1 zoberie najviac %n argumenty. Preto je %2 neplatné. %1 zoberie najviac %n argumentov. Preto je %2 neplatné. %1 requires at least %n argument(s). %2 is therefore invalid. %1 vyžaduje minimálne %n argument. Preto je %2 neplatné. %1 vyžaduje minimálne %n argumenty. Preto je %2 neplatné. %1 vyžaduje minimálne %n argumentov. Preto je %2 neplatné. The first argument to %1 cannot be of type %2. It must be a numeric type, xs:yearMonthDuration or xs:dayTimeDuration. Prvý argument %1 nemôže byť typu %2. Musí byť numerického typu, xs:yearMonthDuration alebo xs:dayTimeDuration. The first argument to %1 cannot be of type %2. It must be of type %3, %4, or %5. Prvý argument %1 nemôže byť typu %2. Musí byť typu %3, %4, alebo %5. The second argument to %1 cannot be of type %2. It must be of type %3, %4, or %5. Druhý argument %1 nemôže byť typu %2. Musí byť typu %3, %4, alebo %5. %1 is not a valid XML 1.0 character. %1 nie je platný XML 1.0 znak. The root node of the second argument to function %1 must be a document node. %2 is not a document node. Hlavný uzol funkcie druhého argumentu k funkcií %1 musí byť uzlom dokumentu. %2 nie je uzol dokumentu. If both values have zone offsets, they must have the same zone offset. %1 and %2 are not the same. Ak obe hodnoty majú zónu offsetu, musia mať rovnakú zónu. %1 a %2 sú rovnaké. %1 was called. %1 bolo zavolané. %1 must be followed by %2 or %3, not at the end of the replacement string. %1 musí nasledovať po %2 alebo %3, nie na konci reťazca náhrady. In the replacement string, %1 must be followed by at least one digit when not escaped. V reťazci náhrady, %1 musí byť nasledované najmenej jednou číslicou, ak nie je pred tým riadiaci znak. In the replacement string, %1 can only be used to escape itself or %2, not %3 V reťazci náhrady, %1 môže byť použité iba na riadenie (escape) samého seba alebo %2, nie %3 %1 matches newline characters %1 sa zhoduje so znakmi pre nový riadok %1 and %2 match the start and end of a line. %1 a %2 sa zhodujú so začiatkom a koncom riadku. Matches are case insensitive Zhody rozlišujú veľkosť písmen Whitespace characters are removed, except when they appear in character classes Prázdne znaky boli odstránené, okrem prípadov, keď sa objavujú v triedach znakov %1 is an invalid regular expression pattern: %2 %1 nie je správny vzor regulárneho výrazu: %2 %1 is an invalid flag for regular expressions. Valid flags are: %1 nie je platný príznak pre regulárny výraz. Platné príznaky sú: If the first argument is the empty sequence or a zero-length string (no namespace), a prefix cannot be specified. Prefix %1 was specified. Ak prvý argument je prázdna sekvencia alebo reťazec s nulovou dĺžkou (bez menného priestoru), prefix nemôže byť špecifikovaný. Prefix %1 bola špecifikovaný. It will not be possible to retrieve %1. Nie je možná získať %1. The default collection is undefined Hlavná zbierka nie je definovaná %1 cannot be retrieved %1 nie je možné získať The normalization form %1 is unsupported. The supported forms are %2, %3, %4, and %5, and none, i.e. the empty string (no normalization). Forma normalizácie %1 nie je podporovaná. Podporované formy sú %2, %3, %4, a %5, a žiadna, napr. prázdny reťazec (žiadna normalizácia). A zone offset must be in the range %1..%2 inclusive. %3 is out of range. Zóna offsetu musí byť v rozsahu %1..%2 vrátane. %3 je mimo rozsahu. %1 is not a whole number of minutes. %1 nie je celé číslo minút. The URI cannot have a fragment URI nemôže mať fragment Required cardinality is %1; got cardinality %2. Požadovaná kardinalita je %1; získaná kardinalita %2. The item %1 did not match the required type %2. Položka %1 sa nezhoduje s požadovaným typom %2. The variable %1 is unused Premenná %1 sa nepoužíva W3C XML Schema identity constraint selector výber obmedzenia identity W3C XML schémy W3C XML Schema identity constraint field pole obmedzenia identity W3C XML schémy A construct was encountered which is disallowed in the current language(%1). Bola zistená konštrukcia, ktorá je zakázaná v aktuálnom jazyku(%1). %1 is an unknown schema type. %1 je neznámy typ schémy. A template with name %1 has already been declared. Šablóna s názvom %1 už bola deklarovaná. %1 is not a valid numeric literal. %1 nie je platný numerický literál. Only one %1 declaration can occur in the query prolog. Iba jedna %1 deklarácia sa môže nachádzať prológu dopytu. The initialization of variable %1 depends on itself Inicializácia premennej %1 záleží na nej samej No variable with name %1 exists Premenná s názvom %1 neexistuje Version %1 is not supported. The supported XQuery version is 1.0. Verzia %1 nie je podporovaná. Podporovaná XQuery verzia je 1.0. The encoding %1 is invalid. It must contain Latin characters only, must not contain whitespace, and must match the regular expression %2. Kódovanie %1 je neplatné. Musí obsahovať iba znaky latinky, nemôže obsahovať biele znaky, a musí sa spĺňať regulárny výraz %2. No function with signature %1 is available Funkcia s podpisom %1 nie je dostupná A default namespace declaration must occur before function, variable, and option declarations. Prednastavená deklarácia menného priestoru sa musí byť pred funkciou, premennou, a deklaráciou možností. Namespace declarations must occur before function, variable, and option declarations. Deklarácie menných priestorov sa musia byť pred funkciou, premennou, a deklaráciou možností. Module imports must occur before function, variable, and option declarations. Importy modulov musia byť pred funkciou, premennou, a deklaráciou možností. The keyword %1 cannot occur with any other mode name. Kľúčové slovo %1 sa nemôže vyskytovať s iným názvom režimu. The value of attribute %1 must be of type %2, which %3 isn't. Hodnota atribútu %1 musí mať typ %2, ktorý %3 nemá. It is not possible to redeclare prefix %1. Nie je možné redeklarovať prefix %1. The prefix %1 cannot be bound. By default, it is already bound to the namespace %2. Prefix %1 nemôže byť viazaný. V predvolenom nastavení je už viazaný na menný priestor %2. Prefix %1 is already declared in the prolog. Prefix %1 je už deklarovaný v prológu. The name of an option must have a prefix. There is no default namespace for options. Názov možnosti musí mať prefix. Pre možnosti nie je prednastavený menný priestor. The Schema Import feature is not supported, and therefore %1 declarations cannot occur. Vlastnosť import schémy nie je podporovaná a preto %1 deklarácie nie sú prípustné. The target namespace of a %1 cannot be empty. Cieľový menný priestor %1 nemôže byť prázdny. The module import feature is not supported Vlastnosť import modulu nie je podporovaná A variable with name %1 has already been declared. Premenná s názvom %1 už bola deklarovaná. No value is available for the external variable with name %1. Pre externú premennú s názvom %1 nie k dispozícií žiadna hodnota. A stylesheet function must have a prefixed name. Funkcia štýlu musí mať názov s prefixom. The namespace for a user defined function cannot be empty (try the predefined prefix %1 which exists for cases like this) The namespace %1 is reserved; therefore user defined functions may not use it. Try the predefined prefix %2, which exists for these cases. Menný priestor %1 je rezervovaný; a preto používateľsky definované funkcie ich nesmú používať. Skúste predefinovať prefix %2, ktorá existuje pre takéto prípady. The namespace of a user defined function in a library module must be equivalent to the module namespace. In other words, it should be %1 instead of %2 Menný priestor používateľom definovanej funkcie v module knižnice musí byť ekvivalent k menného priestoru modulu. V inými slovami, malo to byť %1 namiesto %2 A function already exists with the signature %1. Funkcia s podpisom %1 už existuje. No external functions are supported. All supported functions can be used directly, without first declaring them as external Externé funkcie nie sú podporované. Všetky podporované funkcie môžu byť použité priamo, bez deklarácie ako externé An argument with name %1 has already been declared. Every argument name must be unique. When function %1 is used for matching inside a pattern, the argument must be a variable reference or a string literal. In an XSL-T pattern, the first argument to function %1 must be a string literal, when used for matching. In an XSL-T pattern, the first argument to function %1 must be a literal or a variable reference, when used for matching. In an XSL-T pattern, function %1 cannot have a third argument. In an XSL-T pattern, only function %1 and %2, not %3, can be used for matching. In an XSL-T pattern, axis %1 cannot be used, only axis %2 or %3 can. %1 is an invalid template mode name. The name of a variable bound in a for-expression must be different from the positional variable. Hence, the two variables named %1 collide. Názov premennej viazanej vo for-výraze musí byť odlišný od pozičnej premennej. Preto dve premenné s názvom %1 kolidujú. The Schema Validation Feature is not supported. Hence, %1-expressions may not be used. Vlastnosť validácie schémy nie je podporovaná. Treto %1-výrazy sa nesmú použiť. None of the pragma expressions are supported. Therefore, a fallback expression must be present Žiadny z pragma výrazov nie je podporovaný. Preto fallback výraz musí byť prítomný Each name of a template parameter must be unique; %1 is duplicated. The %1-axis is unsupported in XQuery %1-os nie je podporovaná v XQuery No function with name %1 is available. The namespace URI cannot be the empty string when binding to a prefix, %1. Menný priestor URI nemôže byť prázdny reťazec keď sa viaže na prefix, %1. %1 is an invalid namespace URI. %1 je neplatný menný priestor URI. It is not possible to bind to the prefix %1 Nie je možné viazať na prefix %1 Namespace %1 can only be bound to %2 (and it is, in either case, pre-declared). Menný priestor %1 môže byť viazaný iba s %2 (a to je v tomto prípade pred-deklarované). Prefix %1 can only be bound to %2 (and it is, in either case, pre-declared). Prefix %1 môže byť viazaný iba s %2 (a to je v tomto prípade pred-deklarované). Two namespace declaration attributes have the same name: %1. Dve deklarácie atribútov menného priestora majú rovnaké názvy: %1. The namespace URI must be a constant and cannot use enclosed expressions. Menný priestor URI musí byť konštantný a nesmie používať vložené výrazy. An attribute with name %1 has already appeared on this element. A direct element constructor is not well-formed. %1 is ended with %2. Priamy konštruktor elementu nie je dobre sformovaný. %1 končí na %2. The name %1 does not refer to any schema type. Názov %1 neodkazuje na žiadny typ schémy. %1 is an complex type. Casting to complex types is not possible. However, casting to atomic types such as %2 works. %1 je komplexný typ. Premena (casting) na komplexný typ nie je možný. Avšak premena na atomický typ, ako je %2 ,funguje. %1 is not an atomic type. Casting is only possible to atomic types. %1 nie je atomický typ. Premena(casting) je možná iba na atomické typy. %1 is not a valid name for a processing-instruction. %1 is not in the in-scope attribute declarations. Note that the schema import feature is not supported. %1 nie je in-scope atribút deklarácie. Všimnite si, že vlastnosť import schémy nie je podporovaný. The name of an extension expression must be in a namespace. Názov výrazu prípony musí byť v mennom priestore. Element %1 is not allowed at this location. Text nodes are not allowed at this location. Parse error: %1 Chyba analýzy: %1 The value of the XSL-T version attribute must be a value of type %1, which %2 isn't. Running an XSL-T 1.0 stylesheet with a 2.0 processor. Unknown XSL-T attribute %1. Attribute %1 and %2 are mutually exclusive. In a simplified stylesheet module, attribute %1 must be present. If element %1 has no attribute %2, it cannot have attribute %3 or %4. Element %1 must have at least one of the attributes %2 or %3. At least one mode must be specified in the %1-attribute on element %2. Element %1 must come last. At least one %1-element must occur before %2. Only one %1-element can appear. At least one %1-element must occur inside %2. When attribute %1 is present on %2, a sequence constructor cannot be used. Element %1 must have either a %2-attribute or a sequence constructor. When a parameter is required, a default value cannot be supplied through a %1-attribute or a sequence constructor. Element %1 cannot have children. Element %1 cannot have a sequence constructor. The attribute %1 cannot appear on %2, when it is a child of %3. A parameter in a function cannot be declared to be a tunnel. This processor is not Schema-aware and therefore %1 cannot be used. Top level stylesheet elements must be in a non-null namespace, which %1 isn't. The value for attribute %1 on element %2 must either be %3 or %4, not %5. Attribute %1 cannot have the value %2. The attribute %1 can only appear on the first %2 element. At least one %1 element must appear as child of %2. Empty particle cannot be derived from non-empty particle. Derived particle is missing element %1. Derived element %1 is missing value constraint as defined in base particle. Derived element %1 has weaker value constraint than base particle. Fixed value constraint of element %1 differs from value constraint in base particle. Derived element %1 cannot be nillable as base element is not nillable. Block constraints of derived element %1 must not be more weaker than in the base element. Simple type of derived element %1 cannot be validly derived from base element. Complex type of derived element %1 cannot be validly derived from base element. Element %1 is missing in derived particle. Element %1 does not match namespace constraint of wildcard in base particle. Wildcard in derived particle is not a valid subset of wildcard in base particle. processContent of wildcard in derived particle is weaker than wildcard in base particle. Derived particle allows content that is not allowed in the base particle. %1 has inheritance loop in its base type %2. Circular inheritance of base type %1. Circular inheritance of union %1. %1 is not allowed to derive from %2 by restriction as the latter defines it as final. %1 is not allowed to derive from %2 by extension as the latter defines it as final. Base type of simple type %1 cannot be complex type %2. Simple type %1 cannot have direct base type %2. Simple type %1 is not allowed to have base type %2. Simple type %1 can only have simple atomic type as base type. Simple type %1 cannot derive from %2 as the latter defines restriction as final. Variety of item type of %1 must be either atomic or union. Variety of member types of %1 must be atomic. %1 is not allowed to derive from %2 by list as the latter defines it as final. Simple type %1 is only allowed to have %2 facet. Base type of simple type %1 must have variety of type list. Base type of simple type %1 has defined derivation by restriction as final. Item type of base type does not match item type of %1. Simple type %1 contains not allowed facet type %2. %1 is not allowed to derive from %2 by union as the latter defines it as final. %1 is not allowed to have any facets. Base type %1 of simple type %2 must have variety of union. Base type %1 of simple type %2 is not allowed to have restriction in %3 attribute. Member type %1 cannot be derived from member type %2 of %3's base type %4. Derivation method of %1 must be extension because the base type %2 is a simple type. Complex type %1 has duplicated element %2 in its content model. Complex type %1 has non-deterministic content. Attributes of complex type %1 are not a valid extension of the attributes of base type %2: %3. Content model of complex type %1 is not a valid extension of content model of %2. Complex type %1 must have simple content. Complex type %1 must have the same simple type as its base class %2. Complex type %1 cannot be derived from base type %2%3. Attributes of complex type %1 are not a valid restriction from the attributes of base type %2: %3. Complex type %1 with simple content cannot be derived from complex base type %2. Item type of simple type %1 cannot be a complex type. Member type of simple type %1 cannot be a complex type. %1 is not allowed to have a member type with the same name as itself. %1 facet collides with %2 facet. %1 facet must have the same value as %2 facet of base type. %1 facet must be equal or greater than %2 facet of base type. %1 facet must be less than or equal to %2 facet of base type. %1 facet contains invalid regular expression Unknown notation %1 used in %2 facet. %1 facet contains invalid value %2: %3. %1 facet cannot be %2 or %3 if %4 facet of base type is %5. %1 facet cannot be %2 if %3 facet of base type is %4. %1 facet must be less than or equal to %2 facet. %1 facet must be less than %2 facet of base type. %1 facet and %2 facet cannot appear together. %1 facet must be greater than %2 facet of base type. %1 facet must be less than %2 facet. %1 facet must be greater than or equal to %2 facet of base type. Simple type contains not allowed facet %1. %1, %2, %3, %4, %5 and %6 facets are not allowed when derived by list. Only %1 and %2 facets are allowed when derived by union. %1 contains %2 facet with invalid data: %3. Attribute group %1 contains attribute %2 twice. Attribute group %1 contains two different attributes that both have types derived from %2. Attribute group %1 contains attribute %2 that has value constraint but type that inherits from %3. Complex type %1 contains attribute %2 twice. Complex type %1 contains two different attributes that both have types derived from %2. Complex type %1 contains attribute %2 that has value constraint but type that inherits from %3. Element %1 is not allowed to have a value constraint if its base type is complex. Element %1 is not allowed to have a value constraint if its type is derived from %2. Value constraint of element %1 is not of elements type: %2. Element %1 is not allowed to have substitution group affiliation as it is no global element. Type of element %1 cannot be derived from type of substitution group affiliation. Value constraint of attribute %1 is not of attributes type: %2. Attribute %1 has value constraint but has type derived from %2. %1 attribute in derived complex type must be %2 like in base type. Attribute %1 in derived complex type must have %2 value constraint like in base type. Attribute %1 in derived complex type must have the same %2 value constraint like in base type. Attribute %1 in derived complex type must have %2 value constraint. processContent of base wildcard must be weaker than derived wildcard. Element %1 exists twice with different types. Particle contains non-deterministic wildcards. Base attribute %1 is required but derived attribute is not. Type of derived attribute %1 cannot be validly derived from type of base attribute. Value constraint of derived attribute %1 does not match value constraint of base attribute. Derived attribute %1 does not exist in the base definition. Derived attribute %1 does not match the wildcard in the base definition. Base attribute %1 is required but missing in derived definition. Derived definition contains an %1 element that does not exists in the base definition Derived wildcard is not a subset of the base wildcard. %1 of derived wildcard is not a valid restriction of %2 of base wildcard Attribute %1 from base type is missing in derived type. Type of derived attribute %1 differs from type of base attribute. Base definition contains an %1 element that is missing in the derived definition Can not process unknown element %1, expected elements are: %2. Element %1 is not allowed in this scope, possible elements are: %2. Child element is missing in that scope, possible child elements are: %1. Document is not a XML schema. %1 attribute of %2 element contains invalid content: {%3} is not a value of type %4. %1 attribute of %2 element contains invalid content: {%3}. Target namespace %1 of included schema is different from the target namespace %2 as defined by the including schema. Target namespace %1 of imported schema is different from the target namespace %2 as defined by the importing schema. %1 element is not allowed to have the same %2 attribute value as the target namespace %3. %1 element without %2 attribute is not allowed inside schema without target namespace. %1 element is not allowed inside %2 element if %3 attribute is present. %1 element has neither %2 attribute nor %3 child element. %1 element with %2 child element must not have a %3 attribute. %1 attribute of %2 element must be %3 or %4. %1 attribute of %2 element must have a value of %3. %1 attribute of %2 element must have a value of %3 or %4. %1 element must not have %2 and %3 attribute together. Content of %1 attribute of %2 element must not be from namespace %3. %1 attribute of %2 element must not be %3. %1 attribute of %2 element must have the value %3 because the %4 attribute is set. Specifying use='prohibited' inside an attribute group has no effect. %1 element must have either %2 or %3 attribute. %1 element must have either %2 attribute or %3 or %4 as child element. %1 element requires either %2 or %3 attribute. Text or entity references not allowed inside %1 element %1 attribute of %2 element must contain %3, %4 or a list of URIs. %1 element is not allowed in this context. %1 attribute of %2 element has larger value than %3 attribute. Prefix of qualified name %1 is not defined. %1 attribute of %2 element must either contain %3 or the other values. Component with ID %1 has been defined previously. Element %1 already defined. Attribute %1 already defined. Type %1 already defined. Attribute group %1 already defined. Element group %1 already defined. Notation %1 already defined. Identity constraint %1 already defined. Duplicated facets in simple type %1. %1 references unknown %2 or %3 element %4. %1 references identity constraint %2 that is no %3 or %4 element. %1 has a different number of fields from the identity constraint %2 that it references. Base type %1 of %2 element cannot be resolved. Item type %1 of %2 element cannot be resolved. Member type %1 of %2 element cannot be resolved. Type %1 of %2 element cannot be resolved. Base type %1 of complex type cannot be resolved. %1 cannot have complex base type that has a %2. Content model of complex type %1 contains %2 element so it cannot be derived by extension from a non-empty type. Complex type %1 cannot be derived by extension from %2 as the latter contains %3 element in its content model. Type of %1 element must be a simple type, %2 is not. Substitution group %1 of %2 element cannot be resolved. Substitution group %1 has circular definition. Duplicated element names %1 in %2 element. Reference %1 of %2 element cannot be resolved. Circular group reference for %1. %1 element is not allowed in this scope %1 element cannot have %2 attribute with value other than %3. %1 element cannot have %2 attribute with value other than %3 or %4. %1 or %2 attribute of reference %3 does not match with the attribute declaration %4. Attribute group %1 has circular reference. %1 attribute in %2 must have %3 use like in base type %4. Attribute wildcard of %1 is not a valid restriction of attribute wildcard of base type %2. %1 has attribute wildcard but its base type %2 has not. Union of attribute wildcard of type %1 and attribute wildcard of its base type %2 is not expressible. Enumeration facet contains invalid content: {%1} is not a value of type %2. Namespace prefix of qualified name %1 is not defined. %1 element %2 is not a valid restriction of the %3 element it redefines: %4. %1 is not valid according to %2. String content does not match the length facet. String content does not match the minLength facet. String content does not match the maxLength facet. String content does not match pattern facet. String content is not listed in the enumeration facet. Signed integer content does not match the maxInclusive facet. Signed integer content does not match the maxExclusive facet. Signed integer content does not match the minInclusive facet. Signed integer content does not match the minExclusive facet. Signed integer content is not listed in the enumeration facet. Signed integer content does not match pattern facet. Signed integer content does not match in the totalDigits facet. Unsigned integer content does not match the maxInclusive facet. Unsigned integer content does not match the maxExclusive facet. Unsigned integer content does not match the minInclusive facet. Unsigned integer content does not match the minExclusive facet. Unsigned integer content is not listed in the enumeration facet. Unsigned integer content does not match pattern facet. Unsigned integer content does not match in the totalDigits facet. Double content does not match the maxInclusive facet. Double content does not match the maxExclusive facet. Double content does not match the minInclusive facet. Double content does not match the minExclusive facet. Double content is not listed in the enumeration facet. Double content does not match pattern facet. Decimal content does not match in the fractionDigits facet. Decimal content does not match in the totalDigits facet. Date time content does not match the maxInclusive facet. Date time content does not match the maxExclusive facet. Date time content does not match the minInclusive facet. Date time content does not match the minExclusive facet. Date time content is not listed in the enumeration facet. Date time content does not match pattern facet. Duration content does not match the maxInclusive facet. Duration content does not match the maxExclusive facet. Duration content does not match the minInclusive facet. Duration content does not match the minExclusive facet. Duration content is not listed in the enumeration facet. Duration content does not match pattern facet. Boolean content does not match pattern facet. Binary content does not match the length facet. Binary content does not match the minLength facet. Binary content does not match the maxLength facet. Binary content is not listed in the enumeration facet. Invalid QName content: %1. QName content is not listed in the enumeration facet. QName content does not match pattern facet. Notation content is not listed in the enumeration facet. List content does not match length facet. List content does not match minLength facet. List content does not match maxLength facet. List content is not listed in the enumeration facet. List content does not match pattern facet. Union content is not listed in the enumeration facet. Union content does not match pattern facet. Data of type %1 are not allowed to be empty. Element %1 is missing child element. There is one IDREF value with no corresponding ID: %1. Loaded schema file is invalid. %1 contains invalid data. xsi:schemaLocation namespace %1 has already appeared earlier in the instance document. xsi:noNamespaceSchemaLocation cannot appear after the first no-namespace element or attribute. No schema defined for validation. No definition for element %1 available. Specified type %1 is not known to the schema. Element %1 is not defined in this scope. Declaration for element %1 does not exist. Element %1 contains invalid content. Element %1 is declared as abstract. Element %1 is not nillable. Attribute %1 contains invalid data: %2 Element contains content although it is nillable. Fixed value constraint not allowed if element is nillable. Specified type %1 is not validly substitutable with element type %2. Complex type %1 is not allowed to be abstract. Element %1 contains not allowed attributes. Element %1 contains not allowed child element. Content of element %1 does not match its type definition: %2. Content of element %1 does not match defined value constraint. Element %1 contains not allowed child content. Element %1 contains not allowed text content. Element %1 cannot contain other elements, as it has a fixed content. Element %1 is missing required attribute %2. Attribute %1 does not match the attribute wildcard. Declaration for attribute %1 does not exist. Element %1 contains two attributes of type %2. Attribute %1 contains invalid content. Element %1 contains unknown attribute %2. Content of attribute %1 does not match its type definition: %2. Content of attribute %1 does not match defined value constraint. Non-unique value found for constraint %1. Key constraint %1 contains absent fields. Key constraint %1 contains references nillable element %2. No referenced value found for key reference %1. More than one value found for field %1. Field %1 has no simple type. ID value '%1' is not unique. '%1' attribute contains invalid QName content: %2. empty prázdne zero or one nula alebo jedna exactly one presne jeden one or more jeden alebo viac zero or more nula alebo viac Required type is %1, but %2 was found. Požadovaný typ je %1, ale %2 bol nájdený. Promoting %1 to %2 may cause loss of precision. Prevod %1 na %2 môže spôsobiť stratu presnosti. The focus is undefined. Fokus nie je definovaný. It's not possible to add attributes after any other kind of node. Nie je možné pridať atribúty po akomkoľvek ďalšom type uzla. An attribute by name %1 has already been created. Atribút s názvom %1 už bol vytvorený. Only the Unicode Codepoint Collation is supported(%1). %2 is unsupported. Iba Unicode Codepoint Collation je podporované(%1). %2 nie je podporované.