QXmlPatternistCLI Warning in %1, at line %2, column %3: %4 %1의 %2번째 줄 %3번째 글자에서 경고 발생: %4 Warning in %1: %2 %1에서 경고 발생: %2 Unknown location 알 수 없는 위치 Error %1 in %2, at line %3, column %4: %5 %2의 %3번째 줄 %4번째 글자에서 오류 %1 발생: %5 Error %1 in %2: %3 %2에서 오류 %1 발생: %3 QtXmlPatterns An %1-attribute with value %2 has already been declared. 값이 %2인 %1 속성이 이미 선언되었습니다. An %1-attribute must have a valid %2 as value, which %3 isn't. %1 속성의 값으로 올바른 %2 값이 와야 하지만 %3은(는) 올바른 값이 아닙니다. %1 is an unsupported encoding. 인코딩 %1은(는) 지원하지 않습니다. %1 contains octets which are disallowed in the requested encoding %2. %1은(는) 요청한 인코딩 %2에서 사용할 수 없는 바이트 배열을 포함합니다. The codepoint %1, occurring in %2 using encoding %3, is an invalid XML character. 인코딩 %3을(를) 사용하며 %2에 있는 코드포인트 %1은(는) 올바르지 않은 XML 문자입니다. Network timeout. 네트워크 시간 초과됨. Element %1 can't be serialized because it appears outside the document element. 원소 %1이(가) 문서 밖에 나오므로 시리얼화할 수 없습니다. Attribute %1 can't be serialized because it appears at the top level. 속성 %1이(가) 최상위 단계에 나타나므로 시리얼화할 수 없습니다. Year %1 is invalid because it begins with %2. %1년은 %2(으)로 시작하므로 올바르지 않습니다. Day %1 is outside the range %2..%3. 날짜 %1은(는) %2..%3 범위 밖에 있습니다. Month %1 is outside the range %2..%3. 달 %1은(는) 범위 %2..%3 밖에 있습니다. Overflow: Can't represent date %1. 넘침: 날짜 %1을(를) 표시할 수 없습니다. Day %1 is invalid for month %2. %2월에는 %1일이 없습니다. Time 24:%1:%2.%3 is invalid. Hour is 24, but minutes, seconds, and milliseconds are not all 0; 24시간제 시간 24:%1:%2.%3이(가) 올바르지 않습니다. 시간은 24이나 분, 초, 밀리초가 모두 0 이상입니다; Time %1:%2:%3.%4 is invalid. 시간 %1:%2:%3.%4이(가) 올바르지 않습니다. Overflow: Date can't be represented. 넘침: 날짜를 표시할 수 없습니다. At least one component must be present. 최소한 하나의 구성 요소가 필요합니다. At least one time component must appear after the %1-delimiter. 구분자 %1 이후에 최소 하나의 시간 구성 요소가 나와야 합니다. No operand in an integer division, %1, can be %2. 정수 나눗셈의 두 연산자 %1 모두 %2일 수 없습니다. The first operand in an integer division, %1, cannot be infinity (%2). 정수 나눗셈의 첫번째 연산자 %1은(는) 무한대일 수 없습니다(%2). The second operand in a division, %1, cannot be zero (%2). 나눗셈의 두번째 연산자 %1은(는) 0일 수 없습니다(%2). %1 is not a valid value of type %2. %1은(는) 올바른 %2 형식의 값이 아닙니다. When casting to %1 from %2, the source value cannot be %3. %1에서 %2(으)로 변환할 때 원본 값이 %3일 수 없습니다. Integer division (%1) by zero (%2) is undefined. 0(%2)으로 나누는 정수 나눗셈(%1)은 정의되지 않았습니다. Division (%1) by zero (%2) is undefined. 0(%2)으로 나누는 나눗셈(%1)은 정의되지 않았습니다. Modulus division (%1) by zero (%2) is undefined. 0(%2)으로 나눈 나머지(%1)는 정의되지 않았습니다. Dividing a value of type %1 by %2 (not-a-number) is not allowed. %1 형식의 값을 %2(숫자가 아님)(으)로 나누는 것은 허용되지 않습니다. Dividing a value of type %1 by %2 or %3 (plus or minus zero) is not allowed. %1 형식의 값을 %2나 %3(+0/-0)(으)로 나누는 것은 허용되지 않습니다. Multiplication of a value of type %1 by %2 or %3 (plus or minus infinity) is not allowed. %1 형식의 값을 %2나 %3(양이나 음의 무한대)(으)로 곱하는 것은 허용되지 않습니다. A value of type %1 cannot have an Effective Boolean Value. %1 형식의 값은 유효한 참/거짓을 가질 수 없습니다. Effective Boolean Value cannot be calculated for a sequence containing two or more atomic values. 유효한 참/거짓 값은 두 개 이상의 원자적인 값을 포함하는 배열과 함께 계산될 수 없습니다. Value %1 of type %2 exceeds maximum (%3). %2 형식의 값 %1이(가) 최댓값 %3보다 큽니다. Value %1 of type %2 is below minimum (%3). %2 형식의 값 %1이(가) 최솟값 %3보다 작습니다. A value of type %1 must contain an even number of digits. The value %2 does not. %1 형식의 값은 짝수 자리수만 포함할 수 있으나, 값 %2은(는) 그렇지 않습니다. %1 is not valid as a value of type %2. %1은(는) 올바른 %2 형식의 값이 아닙니다. Ambiguous rule match. 모호한 규칙 일치. Operator %1 cannot be used on type %2. 연산자 %1은(는) 형식 %2에 사용할 수 없습니다. Operator %1 cannot be used on atomic values of type %2 and %3. 연산자 %1은(는) %2, %3 형식의 원자적인 값에 사용할 수 없습니다. The namespace URI in the name for a computed attribute cannot be %1. 계산된 속성 이름의 네임스페이스 URL는 %1일 수 없습니다. The name for a computed attribute cannot have the namespace URI %1 with the local name %2. 계산된 속성 이름의 네임스페이스 URL는 %1, 로컬 이름은 %2일 수 없습니다. Type error in cast, expected %1, received %2. 변환 중 형식 오류, %1을(를) 예상했지만 %2을(를) 받음. When casting to %1 or types derived from it, the source value must be of the same type, or it must be a string literal. Type %2 is not allowed. %1 및 파생 형식으로 변환하려면 원본 값은 같은 형식이거나 문자열 리터럴이어야 합니다. %2 형식은 허용되지 않습니다. No casting is possible with %1 as the target type. %1 형식으로 변환할 수 없습니다. It is not possible to cast from %1 to %2. 형식 %1에서 %2(으)로 변환할 수 없습니다. Casting to %1 is not possible because it is an abstract type, and can therefore never be instantiated. %1은(는) 추상 형식으로 인스턴스를 생성할 수 없어서 변환할 수 없습니다. It's not possible to cast the value %1 of type %2 to %3 %2 형식의 값 %1을(를) %3(으)로 변환할 수 없음 Failure when casting from %1 to %2: %3 %1을(를) %2(으)로 변환하는 중 오류 발생: %3 A comment cannot contain %1 주석에는 %1을(를) 포함할 수 없음 A comment cannot end with a %1. 주석은 %1(으)로 끝날 수 없습니다. No comparisons can be done involving the type %1. 형식 %1의 값은 비교할 수 없습니다. Operator %1 is not available between atomic values of type %2 and %3. 형식 %2, %3인 원자적 값에서 연산자 %1을(를) 사용할 수 없습니다. In a namespace constructor, the value for a namespace cannot be an empty string. 네임스페이스 생성자에서 네임스페이스의 값은 빈 문자열일 수 없습니다. The prefix must be a valid %1, which %2 is not. 접두사는 올바른 %1이어야 하지만, %2은(는) 그렇지 않습니다. The prefix %1 cannot be bound. 접두사 %1이(가) 바인딩될 수 없습니다. Only the prefix %1 can be bound to %2 and vice versa. 접두사 %1만 %2에 바인딩할 수 있으며, 그 역도 마찬가지입니다. An attribute node cannot be a child of a document node. Therefore, the attribute %1 is out of place. 속성 노드는 문서 노드의 자식이 될 수 없습니다. 따라서 속성 %1의 위치가 잘못되었습니다. Circularity detected 재귀 감지됨 A library module cannot be evaluated directly. It must be imported from a main module. 라이브러리 모듈은 직접적으로 실행될 수 없으며, 주 모듈에서 가져와야 합니다. No template by name %1 exists. 이름이 %1인 템플릿이 없습니다. A value of type %1 cannot be a predicate. A predicate must have either a numeric type or an Effective Boolean Value type. %1 형식의 값은 술어가 될 수 없습니다. 술어는 숫자 형식이나 유효한 참/거짓 형식의 값을 가져야 합니다. A positional predicate must evaluate to a single numeric value. 위치가 정해진 술어는 유일한 숫자 값으로 해석되어야 합니다. The target name in a processing instruction cannot be %1 in any combination of upper and lower case. Therefore, %2 is invalid. 처리 과정의 대상 이름은 %1을(를) 모두 대문자나 소문자로 써야 하므로, %2은(는) 올바르지 않습니다. %1 is not a valid target name in a processing instruction. It must be a %2 value, e.g. %3. %1은(는) 올바른 처리 방법 대상 이름이 아닙니다. %3와(과) 같은 %2 값이어야 합니다. The last step in a path must contain either nodes or atomic values. It cannot be a mixture between the two. 경로의 마지막 단계는 노드나 원자적 값만 포함할 수 있으며, 둘을 같이 사용할 수 없습니다. The data of a processing instruction cannot contain the string %1 처리 과정의 데이터는 문자열 %1을(를) 포함할 수 없습니다 No namespace binding exists for the prefix %1 접두사 %1의 네임스페이스 바인딩이 존재하지 않습니다 No namespace binding exists for the prefix %1 in %2 %2의 접두사 %1의 네임스페이스 바인딩이 존재하지 않습니다 %1 is an invalid %2 %1은(는) 올바르지 않은 %2입니다 The parameter %1 is passed, but no corresponding %2 exists. 인자 %1이(가) 전달되었으나 대응하는 %2이(가) 없습니다. The parameter %1 is required, but no corresponding %2 is supplied. 인자 %1이(가) 필요하나, 해당하는 %2이(가) 없습니다. %1 takes at most %n argument(s). %2 is therefore invalid. %1은(는) 최대 %n개의 인자를 받아들이므로, %2은(는) 올바르지 않습니다. %1 requires at least %n argument(s). %2 is therefore invalid. %1은(는) 최소 %n개의 인자를 받아들이므로, %2은(는) 올바르지 않습니다. The first argument to %1 cannot be of type %2. It must be a numeric type, xs:yearMonthDuration or xs:dayTimeDuration. %1의 첫 번째 인자는 %2 형식일 수 없습니다. 숫자나 xs:yearMonthDuration, xs:dayTimeDuration 형식이어야 합니다. The first argument to %1 cannot be of type %2. It must be of type %3, %4, or %5. %1의 첫 번째 인자는 %2 형식일 수 없습니다. %3, %4, %5 형식이어야 합니다. The second argument to %1 cannot be of type %2. It must be of type %3, %4, or %5. %1의 두 번째 인자는 %2 형식일 수 없습니다. %3, %4, %5 형식이어야 합니다. %1 is not a valid XML 1.0 character. %1은(는) 올바르지 않은 XML 1.0 글자입니다. The first argument to %1 cannot be of type %2. %1의 첫 번째 인자의 형식이 %2일 수 없습니다. The root node of the second argument to function %1 must be a document node. %2 is not a document node. 함수 %1의 두 번째 인자의 루트 노드는 문서 노드여야 합니다. %2은(는) 문서 노드가 아닙니다. If both values have zone offsets, they must have the same zone offset. %1 and %2 are not the same. 두 값이 모두 지역 오프셋을 가지고 있다면 같아야 합니다. %1와(과) %2은(는) 같지 않습니다. %1 was called. %1이(가) 호출되었습니다. %1 must be followed by %2 or %3, not at the end of the replacement string. %1은(는) %2(이)나 %3 뒤에 와야 하며, 바꿀 문자열 뒤에 올 수 없습니다. In the replacement string, %1 must be followed by at least one digit when not escaped. 바꿀 문자열이 이스케이핑되지 않았다면 %1 뒤에 숫자가 최소 하나는 와야 합니다. In the replacement string, %1 can only be used to escape itself or %2, not %3 바꿀 문자열에서 %1은(는) 자기 자신이나 %2을(를) 이스케이핑하는 데 사용해야 하며, %3에는 사용할 수 없습니다 %1 matches newline characters %1은(는) 새 줄 문자에 일치합니다 %1 and %2 match the start and end of a line. %1와(과) %2은(는) 각각 줄의 시작과 끝에 일치합니다. Matches are case insensitive 대소문자를 구분하여 일치시킵니다 Whitespace characters are removed, except when they appear in character classes 문자 클래스에 나타나지 않으면 공백 문자는 삭제됩니다 %1 is an invalid regular expression pattern: %2 %1은(는) 올바른 정규 표현식 패턴이 아닙니다: %2 %1 is an invalid flag for regular expressions. Valid flags are: %1은(는) 올바르지 않은 정규 표현식 플래그입니다. 올바른 플래그는 다음과 같습니다: If the first argument is the empty sequence or a zero-length string (no namespace), a prefix cannot be specified. Prefix %1 was specified. 첫 번째 인자가 빈 시퀀스나 빈 문자열(네임스페이스 없음)인 경우, 접두사를 지정할 수 없습니다. 접두사 %1이(가) 지정되었습니다. It will not be possible to retrieve %1. %1을(를) 가져올 수 없습니다. The default collection is undefined 기본 조건이 정의되지 않았음 %1 cannot be retrieved %1을(를) 가져올 수 없음 The normalization form %1 is unsupported. The supported forms are %2, %3, %4, and %5, and none, i.e. the empty string (no normalization). 정규화 형식 %1은(는) 지원하지 않습니다. 지원하는 형식은 %2, %3, %4, %5이며, 빈 문자열을 입력하면 정규화하지 않습니다. A zone offset must be in the range %1..%2 inclusive. %3 is out of range. 시간대 오프셋은 %1..%2 범위 안에 있어야 하며 이 두 값을 포함합니다. %3은(는) 범위를 벗어났습니다. %1 is not a whole number of minutes. %1은(는) 올바른 분 숫자가 아닙니다. The URI cannot have a fragment URI에는 조각이 올 수 없음 Required cardinality is %1; got cardinality %2. 필요한 농도는 %1이지만, %2이(가) 지정되었습니다. The item %1 did not match the required type %2. 항목 %1은(는) 필요한 형식 %2과(와) 일치하지 않습니다. Attribute %1 cannot appear on the element %2. Only the standard attributes can appear. 속성 %1이(가) 원소 %2에 사용될 수 없습니다. 표준 속성만 사용할 수 있습니다. Attribute %1 cannot appear on the element %2. Only %3 is allowed, and the standard attributes. 속성 %1이(가) 원소 %2에 사용될 수 없습니다. 속성 %3 및 표준 속성만 사용할 수 있습니다. Attribute %1 cannot appear on the element %2. Allowed is %3, %4, and the standard attributes. 속성 %1이(가) 원소 %2에 사용될 수 없습니다. 속성 %3, %4 및 표준 속성을 사용할 수 있습니다. Attribute %1 cannot appear on the element %2. Allowed is %3, and the standard attributes. 속성 %1이(가) 원소 %2에 사용될 수 없습니다. 속성 %3 및 표준 속성을 사용할 수 있습니다. XSL-T attributes on XSL-T elements must be in the null namespace, not in the XSL-T namespace which %1 is. XSL-T 원소의 XSL-T 속성은 %1을(를) 포함한 XSL-T 네임스페이스가 아닌 null 네임스페이스에 있어야 합니다. The attribute %1 must appear on element %2. 원소 %2에는 속성 %1을(를) 반드시 정의해야 합니다. The element with local name %1 does not exist in XSL-T. 로컬 이름이 %1인 원소가 XSL-T에 존재하지 않습니다. The variable %1 is unused 변수 %1이(가) 사용되지 않습니다 W3C XML Schema identity constraint selector W3C XML 스키마 아이덴티티 제약 조건 선택자 W3C XML Schema identity constraint field W3C XML 스키마 아이덴티티 제약 조건 필드 A construct was encountered which is disallowed in the current language(%1). 현재 언어(%1)에 사용할 수 없는 생성자가 있습니다. %1 is an unknown schema type. %1은(는) 알 수 없는 스키마 형식입니다. A template with name %1 has already been declared. 이름이 %1인 템플릿이 이미 선언되었습니다. %1 is not a valid numeric literal. %1은(는) 올바른 숫자 리터럴이 아닙니다. Only one %1 declaration can occur in the query prolog. 쿼리 선두부에는 %1 선언이 하나만 올 수 있습니다. The initialization of variable %1 depends on itself 변수 %1의 초기화 과정이 자기 자신에게 의존함 No variable with name %1 exists 이름이 %1인 변수가 없음 Version %1 is not supported. The supported XQuery version is 1.0. 버전 %1은(는) 지원하지 않습니다. 지원하는 XQuery 버전은 1.0입니다. The encoding %1 is invalid. It must contain Latin characters only, must not contain whitespace, and must match the regular expression %2. 인코딩 %1은(는) 올바르지 않습니다. 라틴 알파벳만 포함해야 하며, 공백이 들어가지 않아야 하며, 정규 표현식 %2와(과) 일치해야 합니다. No function with signature %1 is available 선언이 %1인 함수가 없습니다 A default namespace declaration must occur before function, variable, and option declarations. 기본 네임스페이스 선언은 함수, 변수, 옵션 선언 이전에 와야 합니다. Namespace declarations must occur before function, variable, and option declarations. 네임스페이스 선언은 함수, 변수, 옵션 선언 이전에 와야 합니다. Module imports must occur before function, variable, and option declarations. 모듈 가져오기는 함수, 변수, 옵션 선언 이전에 와야 합니다. The keyword %1 cannot occur with any other mode name. 키워드 %1은(는) 다른 모드 이름과 같이 사용할 수 없습니다. The value of attribute %1 must be of type %2, which %3 isn't. 속성 %1의 값은 %2 형식이어야 하지만, %3은(는) 그렇지 않습니다. It is not possible to redeclare prefix %1. 접두사 %1을(를) 다시 선언할 수 없습니다. The prefix %1 can not be bound. By default, it is already bound to the namespace %2. 접두사 %1을(를) 바인딩할 수 없습니다. 기본값으로 네임스페이스 %2에 바인딩되어 있습니다. Prefix %1 is already declared in the prolog. 접두사 %1이(가) 선두부에 이미 선언되어 있습니다. The name of an option must have a prefix. There is no default namespace for options. 옵션의 이름은 접두사를 포함해야 합니다. 옵션에는 기본 네임스페이스가 없습니다. The Schema Import feature is not supported, and therefore %1 declarations cannot occur. 스키마 가져오기 기능은 지원하지 않으며, %1 선언이 올 수 없습니다. The target namespace of a %1 cannot be empty. %1의 대상 네임스페이스가 비어 있으면 안 됩니다. The module import feature is not supported 모듈 가져오기 기능은 지원하지 않습니다 A variable with name %1 has already been declared. 이름이 %1인 변수가 이미 선언되었습니다. No value is available for the external variable with name %1. 이름이 %1인 외부 변수의 사용할 수 있는 값이 없습니다. A stylesheet function must have a prefixed name. 스타일시트 함수는 접두사가 있는 이름을 가져야 합니다. The namespace for a user defined function cannot be empty (try the predefined prefix %1 which exists for cases like this) 사용자 정의 함수의 네임스페이스는 비어 있을 수 없습니다. (이러한 경우에 사용할 수 있는 미리 정의된 접두사 %1을(를) 사용하십시오) The namespace %1 is reserved; therefore user defined functions may not use it. Try the predefined prefix %2, which exists for these cases. 네임스페이스 %1은(는) 예약되어 있으므로 사용자 정의 함수에서 사용할 수 없습니다. 이러한 경우에 사용할 수 있는 미리 정의된 접두사 %2을(를) 사용하십시오. The namespace of a user defined function in a library module must be equivalent to the module namespace. In other words, it should be %1 instead of %2 라이브러리 모듈에 있는 사용자 정의 함수의 네임스페이스는 모듈의 네임스페이스와 같아야 합니다. 즉 %2이(가) 아니라 %1이어야 합니다 A function already exists with the signature %1. 선언이 %1인 함수가 이미 존재합니다. No external functions are supported. All supported functions can be used directly, without first declaring them as external 외부 함수는 지원하지 않습니다. 모든 지원하는 함수는 external로 선언하지 않고 바로 사용할 수 있습니다 An argument with name %1 has already been declared. Every argument name must be unique. 이름이 %1인 인자가 이미 선언되었습니다. 모든 인자의 이름은 달라야 합니다. When function %1 is used for matching inside a pattern, the argument must be a variable reference or a string literal. 함수 %1이(가) 패턴 안쪽에서 일치하는 데 사용되는 경우에는 인자 형식이 변수 참조나 문자열 리터럴이어야 합니다. In an XSL-T pattern, the first argument to function %1 must be a string literal, when used for matching. XSL-T 패턴에서 함수 %1을(를) 일치하는 데 사용하려면 첫 번째 인자는 문자열 리터럴이어야 합니다. In an XSL-T pattern, the first argument to function %1 must be a literal or a variable reference, when used for matching. XSL-T 패턴에서 함수 %1을(를) 일치하는 데 사용하려면 첫 번째 인자 형식이 변수 참조나 문자열 리터럴이어야 합니다. In an XSL-T pattern, function %1 cannot have a third argument. XSL-T 패턴에서 함수 %1에는 세 번째 인자가 올 수 없습니다. In an XSL-T pattern, only function %1 and %2, not %3, can be used for matching. XSL-T 패턴에서 일치하는 데에는 함수 %1, %2만 사용할 수 있으며, %3은(는) 사용할 수 없습니다. In an XSL-T pattern, axis %1 cannot be used, only axis %2 or %3 can. XSL-T 패턴에서 축 %2, %3만 사용할 수 있으며, %1은(는) 사용할 수 없습니다. %1 is an invalid template mode name. %1은(는) 잘못된 템플릿 모드 이름입니다. The name of a variable bound in a for-expression must be different from the positional variable. Hence, the two variables named %1 collide. for 표현식에서 사용되는 바운딩된 변수의 이름은 위치 변수의 이름과 달라야 합니다. 따라서 두 변수 %1이(가) 충돌합니다. The Schema Validation Feature is not supported. Hence, %1-expressions may not be used. 스키마 검사 기능은 지원하지 않습니다. 따라서 %1 표현식은 사용할 수 없습니다. None of the pragma expressions are supported. Therefore, a fallback expression must be present pragma 표현식은 지원하지 않습니다. 따라서 폴백 표현식이 필요합니다 Each name of a template parameter must be unique; %1 is duplicated. 템플릿 인자의 이름은 중복되지 않아야 하므로 같은 이름 %1이(가) 충돌합니다. The %1-axis is unsupported in XQuery XQuery에서 %1 축은 지원하지 않음 No function with name %1 is available. 이름이 %1인 함수를 사용할 수 없습니다. The namespace URI cannot be the empty string when binding to a prefix, %1. 접두사 %1에 바인딩될 때 네임스페이스 URI는 빈 문자열일 수 없습니다. %1 is an invalid namespace URI. %1은(는) 잘못된 네임스페이스 URI입니다. It is not possible to bind to the prefix %1 접두사 %1에 바인딩할 수 없습니다 Namespace %1 can only be bound to %2 (and it is, in either case, pre-declared). 네임스페이스 %1은(는) %2에만 바인딩할 수 있습니다 (미리 선언되어야 합니다). Prefix %1 can only be bound to %2 (and it is, in either case, pre-declared). 접두사 %1은(는) %2에만 바인딩할 수 있습니다 (미리 선언되어야 합니다). Two namespace declaration attributes have the same name: %1. 두 네임스페이스 선언 속성의 이름이 중복됩니다: %1. The namespace URI must be a constant and cannot use enclosed expressions. 네임스페이스 URI는 상수여야 하며 내장된 표현식을 사용할 수 없습니다. An attribute with name %1 has already appeared on this element. 이름이 %1인 속성이 이 원소에 이미 나타났습니다. A direct element constructor is not well-formed. %1 is ended with %2. 직접 원소 생성자의 형식이 올바르지 않습니다. %1이(가) %2(으)로 끝납니다. The name %1 does not refer to any schema type. 이름 %1은(는) 어떠한 스키마 형식도 참조하지 않습니다. %1 is an complex type. Casting to complex types is not possible. However, casting to atomic types such as %2 works. %1은(는) 복합 형식입니다. 복합 형식으로 캐스팅은 불가능하지만, %2와(과) 같은 원자적 형식으로의 캐스팅은 가능합니다. %1 is not an atomic type. Casting is only possible to atomic types. %1은(는) 원자적 타입이 아닙니다. 원자적 타입으로만 변환할 수 있습니다. %1 is not a valid name for a processing-instruction. %1은(는) 올바른 처리 방법 이름이 아닙니다. %1 is not in the in-scope attribute declarations. Note that the schema import feature is not supported. %1은(는) 범위 내에 있는 속성 선언에 존재하지 않습니다. 스키마 가져오기 기능은 지원하지 않습니다. The name of an extension expression must be in a namespace. 확장 표현식의 이름은 네임스페이스 안에 있어야 합니다. Element %1 is not allowed at this location. 이 위치에 원소 %1이(가) 올 수 없습니다. Text nodes are not allowed at this location. 이 위치에 텍스트 노드가 올 수 없습니다. Parse error: %1 처리 오류: %1 The value of the XSL-T version attribute must be a value of type %1, which %2 isn't. XSL-T 버전 속성의 값은 %1 형식이어야 하며, %2은(는) 이 형식이 아닙니다. Running an XSL-T 1.0 stylesheet with a 2.0 processor. XSL-T 1.0 스타일시트를 2.0 프로세서로 실행하고 있습니다. Unknown XSL-T attribute %1. 알 수 없는 XSL-T 속성 %1. Attribute %1 and %2 are mutually exclusive. 속성 %1와(과) %2은(는) 상호 배제적입니다. In a simplified stylesheet module, attribute %1 must be present. 간단한 스타일시트 모듈에서 속성 %1은(는) 반드시 존재해야 합니다. If element %1 has no attribute %2, it cannot have attribute %3 or %4. 원소 %1에 속성 %2이(가) 없으면, 속성 %3 또는 %4을(를) 가질 수 없습니다. Element %1 must have at least one of the attributes %2 or %3. 원소 %1에는 %2, %3 중 최소한 하나의 속성이 있어야 합니다. At least one mode must be specified in the %1-attribute on element %2. 원소 %2의 %1 속성에는 최소한 하나의 모드가 지정되어야 합니다. Element %1 must come last. 원소 %1은(는) 맨 마지막에 와야 합니다. At least one %1-element must occur before %2. 최소한 하나의 %1 원소가 %2 이전에 와야 합니다. Only one %1-element can appear. %1 원소는 최대 하나만 올 수 있습니다. At least one %1-element must occur inside %2. %2 안에 최소한 하나의 %1 원소가 와야 합니다. When attribute %1 is present on %2, a sequence constructor cannot be used. 속성 %1이(가) %2에 존재하면 시퀀스 생성자를 사용할 수 없습니다. Element %1 must have either a %2-attribute or a sequence constructor. 원소 %1은(는) %2 속성이나 시퀀스 생성자 중 하나를 가져야 합니다. When a parameter is required, a default value cannot be supplied through a %1-attribute or a sequence constructor. 인자가 필요한 경우에는 %1 속성이나 시퀀스 생성자를 통해서 기본값을 지정할 수 없습니다. Element %1 cannot have children. 원소 %1은(는) 자식을 가질 수 없습니다. Element %1 cannot have a sequence constructor. 원소 %1은(는) 시퀀스 생성자를 가질 수 없습니다. The attribute %1 cannot appear on %2, when it is a child of %3. 속성 %1은(는) %3의 자식일 때 %2에 나타날 수 없습니다. A parameter in a function cannot be declared to be a tunnel. 함수의 인자는 터널로 선언될 수 없습니다. This processor is not Schema-aware and therefore %1 cannot be used. 이 프로세서는 스키마를 인지하지 못하므로 %1을(를) 사용할 수 없습니다. Top level stylesheet elements must be in a non-null namespace, which %1 isn't. 최상위 스타일시트 원소는 비어 있지 않은 네임스페이스에 있어야 하지만 %1은(는) 그렇지 않습니다. The value for attribute %1 on element %2 must either be %3 or %4, not %5. 원소 %2의 속성 %1의 값은 %3, %4여야 하며, %5이(가) 올 수 없습니다. Attribute %1 cannot have the value %2. 속성 %1은(는) 값 %2을(를) 가질 수 없습니다. The attribute %1 can only appear on the first %2 element. 속성 %1은(는) 첫 %2 원소에만 올 수 있습니다. At least one %1 element must appear as child of %2. %2 원소의 자식으로 최소한 하나의 %1 원소가 와야 합니다. Empty particle cannot be derived from non-empty particle. 비어 있지 않은 입자에서 비어 있는 입자가 파생될 수 없습니다. Derived particle is missing element %1. 파생된 입자에 %1 원소가 없습니다. Derived element %1 is missing value constraint as defined in base particle. 파생된 원소 %1에는 기본 입자에 선언되어 있는 값 제약 조건이 없습니다. Derived element %1 has weaker value constraint than base particle. 파생된 원소 %1은(는) 기본 입자보다 약한 값 제약 조건을 가지고 있습니다. Fixed value constraint of element %1 differs from value constraint in base particle. 원소 %1의 고정 값 제약 조건은 부모 입자의 값 제약 조건과 다릅니다. Derived element %1 cannot be nillable as base element is not nillable. 기본 원소에 nil 값이 올 수 없으므로 파생된 원소 %1에도 nil 값이 올 수 없습니다. Block constraints of derived element %1 must not be more weaker than in the base element. 파생된 원소 %1의 블럭 제약 조건은 기본 원소의 제약 조건보다 약할 수 없습니다. Simple type of derived element %1 cannot be validly derived from base element. 파생된 원소 %1의 간단한 형식은 기본 원소에서 올바르게 파생될 수 없습니다. Complex type of derived element %1 cannot be validly derived from base element. 파생된 원소 %1의 복합 형식은 기본 원소에서 올바르게 파생될 수 없습니다. Element %1 is missing in derived particle. 원소 %1이(가) 파생된 입자에 없습니다. Element %1 does not match namespace constraint of wildcard in base particle. 원소 %1은(는) 기본 입자의 와일드카드 네임스페이스 제약 조건과 일치하지 않습니다. Wildcard in derived particle is not a valid subset of wildcard in base particle. 파생 입자의 와일드카드는 기본 입자의 와일드카드의 올바른 부분 집합이 아닙니다. processContent of wildcard in derived particle is weaker than wildcard in base particle. 파생 입자의 와일드카드의 processContent는 기본 입자의 와일드카드보다 약합니다. Derived particle allows content that is not allowed in the base particle. 기본 입자에서 허용하지 않는 내용이 파생 입자에 올 수 있습니다. %1 has inheritance loop in its base type %2. %1의 부모 형식 %2에서 상속 루프가 발견되었습니다. Circular inheritance of base type %1. 기본 형식 %1의 순환 상속입니다. Circular inheritance of union %1. 공용체 %1의 순환 상속입니다. %1 is not allowed to derive from %2 by restriction as the latter defines it as final. %1은(는) %2에서 final로 선언되었기 때문에 제한으로 분기될 수 없습니다. %1 is not allowed to derive from %2 by extension as the latter defines it as final. %1은(는) %2에서 final로 선언되었기 때문에 확장으로 분기될 수 없습니다. Base type of simple type %1 cannot be complex type %2. 간단한 형식 %1의 기본 형식은 복합 형식 %2일 수 없습니다. Simple type %1 cannot have direct base type %2. 간단한 형식 %1은(는) 직접적인 기본 형식 %2을(를) 가질 수 없습니다. Simple type %1 is not allowed to have base type %2. 간단한 형식 %1에는 기본 형식 %2가 올 수 없습니다. Simple type %1 can only have simple atomic type as base type. 간단한 형식 %1은(는) 간단한 원자적 형식만을 기본 형식으로 가질 수 있습니다. Simple type %1 cannot derive from %2 as the latter defines restriction as final. 형식 %2이(가) final로 선언되었으므로, 간단한 형식 %1은(는) 여기에서 파생될 수 없습니다. Variety of item type of %1 must be either atomic or union. %1 형식의 항목의 파생형은 원자적이거나 공용체여야 합니다. Variety of member types of %1 must be atomic. %1 형식의 항목의 파생형은 원자적이어야 합니다. %1 is not allowed to derive from %2 by list as the latter defines it as final. %1은(는) %2에서 final로 선언되었기 때문에 목록으로 분기될 수 없습니다. Simple type %1 is only allowed to have %2 facet. 간단한 형식 %1은(는) %2 패싯만 포함할 수 있습니다. Base type of simple type %1 must have variety of type list. 간단한 형식 %1의 기본 형식은 파생형 목록을 가져야 합니다. Base type of simple type %1 has defined derivation by restriction as final. 간단한 형식 %1의 기본 형식이 final로 선언되어 있어서 파생이 제한되어 있습니다. Item type of base type does not match item type of %1. 기본 형식의 항목 형식이 %1의 항목 형식과 일치하지 않습니다. Simple type %1 contains not allowed facet type %2. 간단한 형식 %1에 허용되지 않는 패싯 형식 %2이(가) 존재합니다. %1 is not allowed to derive from %2 by union as the latter defines it as final. %1은(는) %2에서 final로 선언되었기 때문에 공용체로 분기될 수 없습니다. %1 is not allowed to have any facets. %1에는 패싯을 추가할 수 없습니다. Base type %1 of simple type %2 must have variety of union. 간단한 형식 %2의 기본 형식 %1에는 공용체의 파생형이 있어야 합니다. Base type %1 of simple type %2 is not allowed to have restriction in %3 attribute. 간단한 형식 %2의 기본 형식 %1에는 %3 속성에 제한을 걸 수 없습니다. Member type %1 cannot be derived from member type %2 of %3's base type %4. %3의 기본 형식 %4의 형식 %2 멤버 형식에서 멤버 형식 %1을(를) 파생할 수 없습니다. Derivation method of %1 must be extension because the base type %2 is a simple type. 기본 형식 %2이(가) 간단한 형식이므로 %1의 파생 방식은 확장이어야 합니다. Complex type %1 has duplicated element %2 in its content model. 복합 형식 %1의 내용 모델에 중복된 원소 %2이(가) 있습니다. Complex type %1 has non-deterministic content. 복합 형식 %1에 비 결정적 내용이 있습니다. Attributes of complex type %1 are not a valid extension of the attributes of base type %2: %3. 복합 형식 %1의 속성이 기본 형식 %2의 속성의 올바른 확장이 아닙니다: %3. Content model of complex type %1 is not a valid extension of content model of %2. 복합 형식 %1의 내용 모델이 %2의 내용 모델의 올바른 확장이 아닙니다. Complex type %1 must have simple content. 복합 형식 %1에는 간단한 내용이 있어야 합니다. Complex type %1 must have the same simple type as its base class %2. 복합 형식 %1은(는) 기본 클래스 %2와(과) 같은 간단한 형식이 필요합니다. Complex type %1 cannot be derived from base type %2%3. 복합 형식 %1은(는) 기본 형식 %2%3에서 파생될 수 없습니다. Attributes of complex type %1 are not a valid restriction from the attributes of base type %2: %3. 복합 형식 %1의 속성에 기본 형식 %2의 속성에서 온 올바른 제한이 없음: %3. Complex type %1 with simple content cannot be derived from complex base type %2. 간단한 내용이 있는 복합 형식 %1은(는) 복합 기본 형식 %2에서 파생될 수 없습니다. Item type of simple type %1 cannot be a complex type. 간단한 형식 %1의 항목 형식은 복합 형식이 될 수 없습니다. Member type of simple type %1 cannot be a complex type. 간단한 형식 %1의 구성원 형식은 복합 형식이 될 수 없습니다. %1 is not allowed to have a member type with the same name as itself. %1에는 자기 자신을 종류로 갖는 구성 요소를 추가할 수 없습니다. %1 facet collides with %2 facet. %1와(과) %2 패싯이 충돌합니다. %1 facet must have the same value as %2 facet of base type. %1 패싯은 기본 형식의 패싯 %2와(과) 같은 값을 가져야 합니다. %1 facet must be equal or greater than %2 facet of base type. %1 패싯은 기본 형식의 %2 패싯의 값보다 크거나 같아야 합니다. %1 facet must be less than or equal to %2 facet of base type. %1 패싯은 기본 형식의 %2 패싯의 값보다 작거나 같아야 합니다. %1 facet contains invalid regular expression %1 패싯에 잘못된 정규 표현식이 있음 Unknown notation %1 used in %2 facet. %2 패싯에 알 수 없는 표기법 %1이(가) 사용되었습니다. %1 facet contains invalid value %2: %3. %1 패싯에 잘못된 값 %2이(가) 포함됨: %3. %1 facet cannot be %2 or %3 if %4 facet of base type is %5. %1 패싯은 기본 형식의 %4 패싯이 %5 형식일 때 %2, %3일 수 없습니다. %1 facet cannot be %2 if %3 facet of base type is %4. %1 패싯은 기본 형식의 %3 패싯이 %4 형식일 때 %2일 수 없습니다. %1 facet must be less than or equal to %2 facet. %1 패싯은 %2 패싯보다 작거나 같아야 합니다. %1 facet must be less than %2 facet of base type. %1 패싯은 기본 형식의 %2 패싯보다 작아야 합니다. %1 facet and %2 facet cannot appear together. %1 패싯과 %2 패싯은 같이 등장할 수 없습니다. %1 facet must be greater than %2 facet of base type. %1 패싯은 기본 형식의 %2 패싯보다 커야 합니다. %1 facet must be less than %2 facet. %1 패싯은 %2 패싯보다 작아야 합니다. %1 facet must be greater than or equal to %2 facet of base type. %1 패싯은 기본 형식의 %2 패싯보다 크거나 같아야 합니다. Simple type contains not allowed facet %1. 간단한 형식에는 패싯 %1이(가) 올 수 없습니다. %1, %2, %3, %4, %5 and %6 facets are not allowed when derived by list. 목록에서 파생된 경우 %1, %2, %3, %4, %5, %6 패싯은 허용되지 않습니다. Only %1 and %2 facets are allowed when derived by union. 공용체에서 파생되었을 때에는 %1, %2 패싯만 사용할 수 있습니다. %1 contains %2 facet with invalid data: %3. %1에 잘못된 데이터가 들어 있는 %2 패싯이 있음: %3. Attribute group %1 contains attribute %2 twice. 속성 그룹 %1에 속성 %2이(가) 두 번 들어 있습니다. Attribute group %1 contains two different attributes that both have types derived from %2. 속성 그룹 %1에 %2에서 파생된 형식을 포함하는 두 개의 서로 다른 속성이 있습니다. Attribute group %1 contains attribute %2 that has value constraint but type that inherits from %3. 속성 그룹 %1에 값 제약 조건이 있지만 %3 형식에서 파생된 형식을 갖는 %2 속성이 있습니다. Complex type %1 contains attribute %2 twice. 복합 형식 %1에 속성 %2이(가) 두 번 들어 있습니다. Complex type %1 contains two different attributes that both have types derived from %2. 복합 형식 %1에 %2에서 파생된 형식을 포함하는 두 개의 서로 다른 속성이 있습니다. Complex type %1 contains attribute %2 that has value constraint but type that inherits from %3. 복합 형식 %1에 값 제약 조건이 있지만 %3 형식에서 파생된 형식을 갖는 %2 속성이 있습니다. Element %1 is not allowed to have a value constraint if its base type is complex. 기본 형식이 complex인 경우 원소 %1은(는) 값 제약 조건을 가질 수 없습니다. Element %1 is not allowed to have a value constraint if its type is derived from %2. 형식이 %2에서 파생된 경우 원소 %1은(는) 값 제약 조건을 가질 수 없습니다. Value constraint of element %1 is not of elements type: %2. 원소 %1의 값 제약 조건이 elements 형식이 아님: %2. Element %1 is not allowed to have substitution group affiliation as it is no global element. 원소 %1은(는) 전역 원소가 아니므로 대체 그룹 친화성을 가질 수 없습니다. Type of element %1 cannot be derived from type of substitution group affiliation. 원소 %1의 형식은 대체 그룹 친화력의 형식에서 파생될 수 없습니다. Value constraint of attribute %1 is not of attributes type: %2. 속성 %1의 값 제약이 attributes 형식이 아님: %2. Attribute %1 has value constraint but has type derived from %2. 속성 %1에는 값 제약이 있지만 %2 형식에서 파생된 형식을 가지고 있습니다. %1 attribute in derived complex type must be %2 like in base type. 파생된 복합체 형식의 %1 속성은 기본 형식처럼 %2 형식의 값을 가져야 합니다. Attribute %1 in derived complex type must have %2 value constraint like in base type. 파생된 복합 형식의 속성 %1은(는) 기본 형식처럼 값 제약 %2을(를) 가져야 합니다. Attribute %1 in derived complex type must have the same %2 value constraint like in base type. 파생된 복합 형식의 속성 %1은(는) 기본 형식과 같은 값 제약 %2을(를) 가져야 합니다. Attribute %1 in derived complex type must have %2 value constraint. 파생된 복합체 형식의 %1 속성은 %2 형식의 값 제약을 가져야 합니다. processContent of base wildcard must be weaker than derived wildcard. 기본 와일드카드의 processContent는 파생 와일드카드보다 약해야 합니다. Element %1 exists twice with different types. 서로 다른 형식의 원소 %1이(가) 존재합니다. Particle contains non-deterministic wildcards. 입자에 비 결정적인 와일드카드가 존재합니다. Base attribute %1 is required but derived attribute is not. 기본 속성 %1이(가) 필요하지만 파생 속성은 필요하지 않습니다. Type of derived attribute %1 cannot be validly derived from type of base attribute. 파생 속성 %1의 형식이 기본 속성의 형식에서 올바르게 파생될 수 없습니다. Value constraint of derived attribute %1 does not match value constraint of base attribute. 파생 속성 %1의 값 제약이 기본 속성의 값 제약과 일치하지 않습니다. Derived attribute %1 does not exist in the base definition. 파생 속성 %1이(가) 기본 정의에 없습니다. Derived attribute %1 does not match the wildcard in the base definition. 파생 속성 %1이(가) 기본 속성의 와일드카드와 일치하지 않습니다. Base attribute %1 is required but missing in derived definition. 기본 속성 %1이(가) 필요하지만 파생 정의에 없습니다. Derived definition contains an %1 element that does not exists in the base definition 파생 정의에서 기본 정의에 없는 %1 원소를 포함합니다 Derived wildcard is not a subset of the base wildcard. 파생 와일드카드가 기본 와일드카드의 부분 집합이 아닙니다. %1 of derived wildcard is not a valid restriction of %2 of base wildcard 파생 와일드카드의 %1은(는) 기본 와일드카드의 %2의 올바른 제약 조건이 아닙니다 Attribute %1 from base type is missing in derived type. 기본 형식의 속성 %1이(가) 파생 형식에 없습니다. Type of derived attribute %1 differs from type of base attribute. 파생 속성 %1의 형식이 기본 속성과 다릅니다. Base definition contains an %1 element that is missing in the derived definition 파생 정의에 없는 %1 원소가 기본 정의에 포함되어 있습니다 Can not process unknown element %1, expected elements are: %2. 알 수 없는 원소 %1을(를) 처리할 수 없습니다. 예상하는 원소는 다음과 같습니다: %2. Element %1 is not allowed in this scope, possible elements are: %2. 원소 %1은(는) 이 범위에 올 수 없습니다. 가능한 원소는 다음과 같습니다: %2. Child element is missing in that scope, possible child elements are: %1. 그 범위에 자식 원소가 없습니다. 가능한 자식 원소는 다음과 같습니다: %1. Document is not a XML schema. 문서가 XML 스키마가 아닙니다. %1 attribute of %2 element contains invalid content: {%3} is not a value of type %4. %2 원소의 %1 속성에 올바르지 않은 내용이 있음: {%3}은(는) %4 형식의 값이 아님. %1 attribute of %2 element contains invalid content: {%3}. %2 원소의 %1 속성에 올바르지 않은 내용이 있음: {%3}. Target namespace %1 of included schema is different from the target namespace %2 as defined by the including schema. 포함된 스키마의 대상 네임스페이스 %1은(는) 포함하는 스키마에 정의된 대상 네임스페이스 %2와(과) 다릅니다. Target namespace %1 of imported schema is different from the target namespace %2 as defined by the importing schema. 가져온 스키마의 대상 네임스페이스 %1은(는) 가져온 스키마에 정의된 대상 네임스페이스 %2와(과) 다릅니다. %1 element is not allowed to have the same %2 attribute value as the target namespace %3. 원소 %1의 속성 %2의 값으로는 대상 네임스페이스 %3와(과) 같은 값이 올 수 없습니다. %1 element without %2 attribute is not allowed inside schema without target namespace. 대상 네임스페이스가 없는 스키마에는 %2 속성이 없는 %1 원소가 올 수 없습니다. %1 element is not allowed inside %2 element if %3 attribute is present. %3 속성이 존재하면 %2 원소 안에 %1 원소가 올 수 없습니다. %1 element has neither %2 attribute nor %3 child element. %1 원소에 %2 속성이나 %3 자식 원소가 없습니다. %1 element with %2 child element must not have a %3 attribute. %2 자식 원소가 있는 %1 원소에는 %3 속성이 존재할 수 없습니다. %1 attribute of %2 element must be %3 or %4. %2 원소의 %1 속성은 %3(이)나 %4여야 합니다. %1 attribute of %2 element must have a value of %3. %2 원소의 %1 속성은 %3 형식의 값을 가져야 합니다. %1 attribute of %2 element must have a value of %3 or %4. %2 원소의 %1 속성은 값 %3(이)나 %4이(가) 있어야 합니다. %1 element must not have %2 and %3 attribute together. %1 원소는 %2, %3 속성 둘 다를 가질 수 없습니다. Content of %1 attribute of %2 element must not be from namespace %3. %2 원소의 %1 속성의 내용은 %3 네임스페이스에서 올 수 없습니다. %1 attribute of %2 element must not be %3. %2 원소의 %1 속성은 %3일 수 없습니다. %1 attribute of %2 element must have the value %3 because the %4 attribute is set. %4 속성이 설정되어 있으므로 %2 원소의 %1 속성 값으로는 %3이(가) 지정되어야 합니다. Specifying use='prohibited' inside an attribute group has no effect. 속성 그룹 안에서 use='prohibited'를 사용하여도 효과가 없습니다. %1 element must have either %2 or %3 attribute. %1 원소는 %2, %3 중 하나의 속성만 가져야 합니다. %1 element must have either %2 attribute or %3 or %4 as child element. %1 원소는 %2 속성이나 자식 원소로 %3, %4을(를) 가져야 합니다. %1 element requires either %2 or %3 attribute. %1 원소에는 %2, %3 중 하나의 속성이 필요합니다. Text or entity references not allowed inside %1 element %1 원소 안에 텍스트나 엔티티 참조를 사용할 수 없음 %1 attribute of %2 element must contain %3, %4 or a list of URIs. %2 원소의 %1 속성에는 %3, %4, 또는 URI 목록이 포함되어야 합니다. %1 element is not allowed in this context. 이 컨텍스트에는 %1 원소가 허용되지 않습니다. %1 attribute of %2 element has larger value than %3 attribute. %2 원소의 %1 속성이 %3 속성보다 큰 값을 가지고 있습니다. Prefix of qualified name %1 is not defined. 접두사나 완전한 이름 %1이(가) 정의되지 않았습니다. %1 attribute of %2 element must either contain %3 or the other values. %2 원소의 %1 속성에는 %3(이)나 다른 값이 포함되어야 합니다. Component with ID %1 has been defined previously. ID가 %1인 구성 요소가 이미 정의되었습니다. Element %1 already defined. 원소 %1이(가) 이미 정의되었습니다. Attribute %1 already defined. 속성 %1이(가) 이미 정의되었습니다. Type %1 already defined. 형식 %1이(가) 이미 정의되었습니다. Attribute group %1 already defined. 속성 그룹 %1이(가) 이미 정의되었습니다. Element group %1 already defined. 원소 그룹 %1이(가) 이미 정의되었습니다. Notation %1 already defined. 표기법 %1이(가) 이미 정의되었습니다. Identity constraint %1 already defined. 아이덴티티 제약 조건 %1이(가) 이미 정의되었습니다. Duplicated facets in simple type %1. 간단한 형식 %1에 중복된 패싯이 있습니다. %1 references unknown %2 or %3 element %4. %1에서 알 수 없는 %2 또는 %3 원소 %4을(를) 참조합니다. %1 references identity constraint %2 that is no %3 or %4 element. %1에서 %3, %4 원소가 없는 아이덴티티 제약 조건 %2을(를) 참조합니다. %1 has a different number of fields from the identity constraint %2 that it references. %1에서 참조하는 아이덴티티 제약 조건 %2와(과) 필드 개수가 다릅니다. Base type %1 of %2 element cannot be resolved. %2 원소의 기본 형식 %1을(를) 해석할 수 없습니다. Item type %1 of %2 element cannot be resolved. %2 원소의 항목 형식 %1을(를) 해석할 수 없습니다. Member type %1 of %2 element cannot be resolved. %2 원소의 구성 요소 형식 %1을(를) 해석할 수 없습니다. Type %1 of %2 element cannot be resolved. %2 원소의 형식 %1을(를) 해석할 수 없습니다. Base type %1 of complex type cannot be resolved. 복합 형식 %1의 기본 형식을 해석할 수 없습니다. %1 cannot have complex base type that has a %2. %1에는 %2을(를) 포함하는 복합 기본 형식을 추가할 수 없음. Content model of complex type %1 contains %2 element so it cannot be derived by extension from a non-empty type. 복합 형식 %1의 내용 모델은 %2 원소를 포함하므로 비어 있지 않은 형식의 확장으로 파생될 수 없습니다. Complex type %1 cannot be derived by extension from %2 as the latter contains %3 element in its content model. 복합 형식 %1은(는) %2의 내용 모델에 %3 원소를 포함하므로 여기에서 확장으로 파생될 수 없습니다. Type of %1 element must be a simple type, %2 is not. %1 원소의 형식은 간단한 형식이어야 하며, %2은(는) 그렇지 않습니다. Substitution group %1 of %2 element cannot be resolved. %2의 대체 그룹 %1을(를) 해석할 수 없습니다. Substitution group %1 has circular definition. 대체 그룹 %1에 순환 정의가 있습니다. Duplicated element names %1 in %2 element. %2 원소에 중복된 원소 이름 %1이(가) 있습니다. Reference %1 of %2 element cannot be resolved. %2 원소의 참조 %1을(를) 해석할 수 없습니다. Circular group reference for %1. %1의 순환 그룹 참조가 발견되었습니다. %1 element is not allowed in this scope 이 범위에 %1 원소가 올 수 없습니다 %1 element cannot have %2 attribute with value other than %3. %1 원소의 %2 속성 값은 %3이어야 합니다. %1 element cannot have %2 attribute with value other than %3 or %4. %1 원소의 %2 속성 값은 %3(이)나 %4여야 합니다. %1 or %2 attribute of reference %3 does not match with the attribute declaration %4. 참조 %3의 속성 %1이나 %2이(가) 속성 선언 %4와(과) 일치하지 않습니다. Attribute group %1 has circular reference. 속성 그룹 %1에 순환 참조가 있습니다. %1 attribute in %2 must have %3 use like in base type %4. %2의 %1 속성은 기본 형식 %4처럼 %3을(를) 사용하여야 합니다. Attribute wildcard of %1 is not a valid restriction of attribute wildcard of base type %2. %1의 속성 와일드카드는 기본 형식 %2의 속성 와일드카드의 올바른 제한이 아닙니다. %1 has attribute wildcard but its base type %2 has not. %1에는 속성 와일드카드가 있지만 기본 형식 %2에는 없습니다. Union of attribute wildcard of type %1 and attribute wildcard of its base type %2 is not expressible. %1 형식의 속성 와일드카드와 기본 형식 %2의 속성 와일드카드의 공용체는 표현할 수 없습니다. Enumeration facet contains invalid content: {%1} is not a value of type %2. Enumeration 패싯에 올바르지 않은 내용이 있습니다: {%1}은(는) %2 형식의 값이 아닙니다. Namespace prefix of qualified name %1 is not defined. 완전한 이름 %1을(를) 사용하는 네임스페이스 접두사가 선언되지 않았습니다. %1 element %2 is not a valid restriction of the %3 element it redefines: %4. %1 원소 %2은(는) 재정의하는 %3 원소의 올바른 제약 조건이 아닙니다: %4. %1 is not valid according to %2. %2에 의하면 %1은(는) 올바르지 않습니다. String content does not match the length facet. 문자열 내용이 length 패싯과 일치하지 않습니다. String content does not match the minLength facet. 문자열 내용이 minLength 패싯과 일치하지 않습니다. String content does not match the maxLength facet. 문자열 내용이 maxLength 패싯과 일치하지 않습니다. String content does not match pattern facet. 문자열 내용이 pattern 패싯과 일치하지 않습니다. String content is not listed in the enumeration facet. 문자열 내용이 enumeration 패싯과 일치하지 않습니다. Signed integer content does not match the maxInclusive facet. 부호 있는 정수 내용이 maxInclusive 패싯과 일치하지 않습니다. Signed integer content does not match the maxExclusive facet. 부호 있는 정수 내용이 maxExclusive 패싯과 일치하지 않습니다. Signed integer content does not match the minInclusive facet. 부호 있는 정수 내용이 minInclusive 패싯과 일치하지 않습니다. Signed integer content does not match the minExclusive facet. 부호 있는 정수 내용이 minExclusive 패싯과 일치하지 않습니다. Signed integer content is not listed in the enumeration facet. 부호 있는 정수 내용이 enumeration 패싯에 없습니다. Signed integer content does not match pattern facet. 부호 있는 정수 내용이 pattern 패싯과 일치하지 않습니다. Signed integer content does not match in the totalDigits facet. 부호 있는 정수 내용이 totalDigits 패싯과 일치하지 않습니다. Unsigned integer content does not match the maxInclusive facet. 부호 없는 정수 내용이 maxInclusive 패싯과 일치하지 않습니다. Unsigned integer content does not match the maxExclusive facet. 부호 없는 정수 내용이 maxExclusive 패싯과 일치하지 않습니다. Unsigned integer content does not match the minInclusive facet. 부호 없는 정수 내용이 minInclusive 패싯과 일치하지 않습니다. Unsigned integer content does not match the minExclusive facet. 부호 없는 정수 내용이 minExclusive 패싯과 일치하지 않습니다. Unsigned integer content is not listed in the enumeration facet. 부호 없는 정수 내용이 enumeration 패싯에 없습니다. Unsigned integer content does not match pattern facet. 부호 없는 정수 내용이 pattern 패싯과 일치하지 않습니다. Unsigned integer content does not match in the totalDigits facet. 부호 없는 정수 내용이 totalDigits 패싯과 일치하지 않습니다. Double content does not match the maxInclusive facet. 실수 내용이 maxLength 패싯과 일치하지 않습니다. Double content does not match the maxExclusive facet. 실수 내용이 maxExclusive 패싯과 일치하지 않습니다. Double content does not match the minInclusive facet. 실수 내용이 minInclusive 패싯과 일치하지 않습니다. Double content does not match the minExclusive facet. 실수 내용이 minExclusive 패싯과 일치하지 않습니다. Double content is not listed in the enumeration facet. 실수 내용이 enumeration 패싯과 일치하지 않습니다. Double content does not match pattern facet. 실수 내용이 pattern 패싯과 일치하지 않습니다. Decimal content does not match in the fractionDigits facet. 십진수 내용이 fractionDigits 패싯과 일치하지 않습니다. Decimal content does not match in the totalDigits facet. 십진수 내용이 totalDigits 패싯과 일치하지 않습니다. Date time content does not match the maxInclusive facet. 날짜 및 시간 내용이 maxInclusive 패싯과 일치하지 않습니다. Date time content does not match the maxExclusive facet. 날짜 및 시간 내용이 maxExclusive 패싯과 일치하지 않습니다. Date time content does not match the minInclusive facet. 날짜 및 시간 내용이 minInclusive 패싯과 일치하지 않습니다. Date time content does not match the minExclusive facet. 날짜 및 시간 내용이 minExclusive 패싯과 일치하지 않습니다. Date time content is not listed in the enumeration facet. 날짜 및 시간 내용이 enumeration 패싯에 없습니다. Date time content does not match pattern facet. 날짜 및 시간 내용이 pattern 패싯과 일치하지 않습니다. Duration content does not match the maxInclusive facet. 지속 시간 내용이 maxInclusive 패싯과 일치하지 않습니다. Duration content does not match the maxExclusive facet. 지속 시간 내용이 maxExclusive 패싯과 일치하지 않습니다. Duration content does not match the minInclusive facet. 지속 시간 내용이 minInclusive 패싯과 일치하지 않습니다. Duration content does not match the minExclusive facet. 지속 시간 내용이 minExclusive 패싯과 일치하지 않습니다. Duration content is not listed in the enumeration facet. 지속 시간 내용이 enumeration 패싯에 없습니다. Duration content does not match pattern facet. 지속 시간 내용이 pattern 패싯과 일치하지 않습니다. Boolean content does not match pattern facet. 참/거짓 내용이 pattern 패싯과 일치하지 않습니다. Binary content does not match the length facet. 참/거짓 내용이 length 패싯과 일치하지 않습니다. Binary content does not match the minLength facet. 참/거짓 내용이 minLength 패싯과 일치하지 않습니다. Binary content does not match the maxLength facet. 참/거짓 내용이 maxLength 패싯과 일치하지 않습니다. Binary content is not listed in the enumeration facet. 참/거짓 내용이 enumeration 패싯에 없습니다. Invalid QName content: %1. 잘못된 QName 내용: %1. QName content is not listed in the enumeration facet. QName 내용이 enumeration 패싯에 없습니다. QName content does not match pattern facet. QName 내용이 pattern 패싯과 일치하지 않습니다. Notation content is not listed in the enumeration facet. Notation 내용이 enumeration 패싯에 없습니다. List content does not match length facet. 목록 내용이 length 패싯과 일치하지 않습니다. List content does not match minLength facet. 목록 내용이 minLength 패싯과 일치하지 않습니다. List content does not match maxLength facet. 목록 내용이 maxLength 패싯과 일치하지 않습니다. List content is not listed in the enumeration facet. 목록 내용이 enumeration 패싯에 없습니다. List content does not match pattern facet. 목록 내용이 pattern 패싯과 일치하지 않습니다. Union content is not listed in the enumeration facet. 공용체 내용이 enumeration 패싯에 없습니다. Union content does not match pattern facet. 공용체 내용이 pattern 패싯과 일치하지 않습니다. Data of type %1 are not allowed to be empty. %1 형식 데이터는 비어 있으면 안 됩니다. Element %1 is missing child element. 원소 %1에 자식 원소가 없습니다. There is one IDREF value with no corresponding ID: %1. 대응하는 ID가 없는 IDREF 값이 있습니다: %1. Loaded schema file is invalid. 불러온 스키마 파일이 올바르지 않습니다. %1 contains invalid data. %1에 올바르지 않은 데이터가 있습니다. xsi:schemaLocation namespace %1 has already appeared earlier in the instance document. xsi:schemaLocation 네임스페이스 %1이(가) 인스턴스 문서의 더 위에 존재합니다. xsi:noNamespaceSchemaLocation cannot appear after the first no-namespace element or attribute. xsi:noNamespaceSchemaLocation은 첫 no-namespace 원소나 속성 다음에 나올 수 없습니다. No schema defined for validation. 검증할 스키마가 정의되지 않았습니다. No definition for element %1 available. 원소 %1의 정의를 사용할 수 없습니다. Specified type %1 is not known to the schema. 스키마에 지정한 형식 %1이(가) 정의되어 있지 않습니다. Element %1 is not defined in this scope. 원소 %1은(는) 이 범위에 정의되지 않았습니다. Declaration for element %1 does not exist. 원소 %1의 선언이 존재하지 않습니다. Element %1 contains invalid content. 원소 %1에 올바르지 않은 내용이 있습니다. Element %1 is declared as abstract. 원소 %1이 추상 원소로 선언되었습니다. Element %1 is not nillable. 원소 %1에 nil 값을 대입할 수 없습니다. Attribute %1 contains invalid data: %2 속성 %1에 잘못된 데이터가 있음: %2 Element contains content although it is nillable. 원소에 nil 값을 할당할 수 있지만 내용이 들어 있습니다. Fixed value constraint not allowed if element is nillable. 원소에 nil 값을 대입할 수 있으면 고정된 값 제약 조건을 사용할 수 없습니다. Specified type %1 is not validly substitutable with element type %2. 지정한 형식 %1은(는) %2 형식의 원소로 올바르게 대체할 수 없습니다. Complex type %1 is not allowed to be abstract. 복합 형식 %1은(는) 추상으로 선언할 수 없습니다. Element %1 contains not allowed attributes. 원소 %1에 허용되지 않은 속성이 포함되어 있습니다. Element %1 contains not allowed child element. 원소 %1에 허용되지 않은 자식 원소가 포함되어 있습니다. Content of element %1 does not match its type definition: %2. 원소 %1의 내용은 형식 선언과 일치하지 않습니다: %2. Content of element %1 does not match defined value constraint. 원소 %1의 내용은 정의된 값 제약 조건과 일치하지 않습니다. Element %1 contains not allowed child content. 원소 %1에 허용되지 않은 자식 내용이 포함되어 있습니다. Element %1 contains not allowed text content. 원소 %1에 허용되지 않은 텍스트 내용이 포함되어 있습니다. Element %1 cannot contain other elements, as it has a fixed content. 원소 %1의 내용은 고정되어 있으므로 다른 원소를 포함할 수 없습니다. Element %1 is missing required attribute %2. 원소 %1에 필요한 속성 %2이(가) 없습니다. Attribute %1 does not match the attribute wildcard. 속성 %1이(가) 속성 와일드카드와 일치하지 않습니다. Declaration for attribute %1 does not exist. 속성 %1 선언이 존재하지 않습니다. Element %1 contains two attributes of type %2. 원소 %1은(는) 형식이 %2인 속성을 두 개 포함하고 있습니다. Attribute %1 contains invalid content. 속성 %1에 잘못된 데이터가 있습니다. Element %1 contains unknown attribute %2. 원소 %1에 알 수 없는 속성 %2이(가) 포함되어 있습니다. Content of attribute %1 does not match its type definition: %2. 속성 %1의 내용과 형식 정의가 일치하지 않습니다: %2. Content of attribute %1 does not match defined value constraint. 속성 %1의 내용이 정의된 값 제약 조건과 일치하지 않습니다. Non-unique value found for constraint %1. 제약 조건 %1에 중복되는 값이 있습니다. Key constraint %1 contains absent fields. 키 제약 조건 %1에 비어 있는 필드가 있습니다. Key constraint %1 contains references nillable element %2. 키 제약 조건 %1에서 nil 값이 올 수 있는 원소 %2을(를) 참조합니다. No referenced value found for key reference %1. 키 참조 %1에 대한 참조되는 값을 찾을 수 없습니다. More than one value found for field %1. 필드 %1에 하나 이상의 값이 있습니다. Field %1 has no simple type. 필드 %1에 간단한 형식이 없습니다. ID value '%1' is not unique. ID 값 '%1'이(가) 유일하지 않습니다. '%1' attribute contains invalid QName content: %2. 속성 '%1'에 올바르지 않은 QName 내용이 있음: %2. empty 비어 있음 zero or one 0이나 1 exactly one 정확히 1 one or more 1 이상 zero or more 0 이상 Required type is %1, but %2 was found. 요청한 형식은 %1(이)나 %2이(가) 요청되었습니다. Promoting %1 to %2 may cause loss of precision. %1을(를) %2(으)로 변환하면 정밀도를 잃어버릴 수 있습니다. The focus is undefined. 초점이 정의되지 않았습니다. It's not possible to add attributes after any other kind of node. 노드 뒤에 속성을 추가할 수 없습니다. An attribute by name %1 has already been created. 이름이 %1인 속성이 이미 생성되었습니다. Only the Unicode Codepoint Collation is supported(%1). %2 is unsupported. 유니코드 코드 포인트 순 정렬만 지원합니다(%1). %2은(는) 지원하지 않습니다.