ObjectDuplicate method name중복된 메서드 이름Method names cannot begin with an upper case letter메서드 이름은 대문자로 시작할 수 없음Illegal method name잘못된 메서드 이름Duplicate signal name중복된 시그널 이름Duplicate property name중복된 속성 이름Property names cannot begin with an upper case letter속성 이름은 대문자로 시작할 수 없음Duplicate default property중복된 기본 속성Duplicate alias name중복된 별명 이름Alias names cannot begin with an upper case letter별명 이름은 대문자로 시작할 수 없음Property value set multiple times속성 값이 여러 번 설정됨QInputMethodInputMethod is an abstract classInputMethod는 추상 클래스임QQmlAnonymousComponentResolverComponent objects cannot declare new functions.컴포넌트 객체에서는 새로운 함수를 정의할 수 없습니다.Component objects cannot declare new properties.컴포넌트 객체에서는 새로운 속성을 정의할 수 없습니다.Component objects cannot declare new signals.컴포넌트 객체에서는 새로운 시그널을 정의할 수 없습니다.Cannot create empty component specification비어 있는 컴포넌트 정의를 만들 수 없음Component elements may not contain properties other than idComponent 원소는 id 이외의 다른 속성을 포함할 수 없음Invalid component body specification잘못된 컴포넌트 body 지정id is not unique중복되는 id가 있음Circular alias reference detected순환 별명 참조 감지됨Invalid alias reference. Unable to find id "%1"잘못된 별명 참조. id "%1"을(를) 찾을 수 없음Invalid alias target location: %1잘못된 별명 대상 위치: %1Invalid alias location잘못된 별명 위치QQmlCodeGeneratorProperty value set multiple times속성 값이 여러 번 설정됨Expected type name형식 이름이 필요함Signal names cannot begin with an upper case letter시그널 이름은 대문자로 시작할 수 없음Illegal signal name잘못된 시그널 이름No property alias location속성 별명 위치가 지정되지 않음Invalid alias reference. An alias reference must be specified as <id>, <id>.<property> or <id>.<value property>.<property>잘못된 별명 참조. 별명 참조는 <id>, <id>.<property> 또는 <id>.<value property>.<property>여야 함Invalid alias location잘못된 별명 위치Illegal property name잘못된 속성 이름Invalid component id specification잘못된 컴포넌트 id 지정Invalid empty ID잘못된 빈 IDIDs cannot start with an uppercase letterID는 대문자로 시작할 수 없음IDs must start with a letter or underscoreID는 글자나 밑줄로 시작해야 함IDs must contain only letters, numbers, and underscoresID는 글자, 숫자, 밑줄만 포함해야 함ID illegally masks global JavaScript propertyID가 전역 자바스크립트 속성을 가림Invalid use of id propertyid 속성을 잘못 사용함QQmlComponentInvalid empty URL잘못된 빈 URLcreateObject: value is not an objectcreateObject: 값이 객체가 아님Object destroyed during incubation객체를 만드는 중 파괴됨QQmlConnectionsCannot assign to non-existent property "%1"존재하지 않는 속성 "%1"에 할당할 수 없음Connections: nested objects not allowed연결: 중첩된 객체를 사용할 수 없음Connections: syntax error연결: 문법 오류Connections: script expected연결: 스크립트가 필요함QQmlDebugServerImplQML Debugger: Invalid argument "%1" detected. Ignoring the same.QML 디버거: 잘못된 인자 "%1"이(가) 감지되었습니다. 해당 인자를 무시합니다.QML Debugger: Ignoring "-qmljsdebugger=%1".QML 디버거: "-qmljsdebugger=%1" 인자를 무시합니다.The format is "-qmljsdebugger=[file:<file>|port:<port_from>][,<port_to>][,host:<ip address>][,block][,services:<service>][,<service>]*"올바른 형식은 "-qmljsdebugger=[file:<file>|port:<port_from>][,<port_to>][,host:<ip address>][,block][,services:<service>][,<service>]*"입니다"file:" can be used to specify the name of a file the debugger will try to connect to using a QLocalSocket. If "file:" is given any "host:" and"port:" arguments will be ignored."file:" 인자는 디버거에서 QLocalSocket을 통해 연결할 파일입니다. "file:" 인자를 지정하면 "host:" 및 "port:" 인자를 무시합니다."host:" and "port:" can be used to specify an address and a single port or a range of ports the debugger will try to bind to with a QTcpServer."host:" 및 "port:" 인자는 디버거에서 QTcpServer를 통해 연결할 호스트 주소나 단일 포트 및 포트 범위입니다."block" makes the debugger and some services wait for clients to be connected and ready before the first QML engine starts."block" 인자를 지정하면 디버거와 일부 서비스가 첫 QML 엔진을 시작할 때까지 클라이언트가 연결되고 준비되기를 기다립니다."services:" can be used to specify which debug services the debugger should load. Some debug services interact badly with others. The V4 debugger should not be loaded when using the QML profiler as it will force any V4 engines to use the JavaScript interpreter rather than the JIT. The following debug services are available by default:"services:" 인자는 디버거에서 불러올 디버그 서비스입니다. 일부 디버그 서비스는 서로간에 간섭을 발생시킬 수 있습니다. QML 프로파일러를 사용하면 V4 엔진이 JIT 대신 자바스크립트 인터프리터를 사용하는 것을 강제하므로, QML 프로파일러를 사용할 때에는 V4 디버거를 불러오지 말아야 합니다. 다음 디버그 서비스를 사용할 수 있습니다:The QML debuggerQML 디버거The V4 debuggerV4 디버거The QML inspectorQML 검사 도구The QML profilerQML 프로파일러Allows the client to delay the starting and stopping of
QML engines until other services are ready. QtCreator
uses this service with the QML profiler in order to
profile multiple QML engines at the same time.다른 서비스가 준비될 때까지 클라이언트에서 QML 엔진 시작과 정지를
지연시킬 수 있도록 합니다. Qt Creator는 여러 개의
QML 엔진을 동시에 프로파일링할 수 있도록 이 서비스를
QML 프로파일러와 함께 사용합니다.Sends qDebug() and similar messages over the QML debug
connection. QtCreator uses this for showing debug
messages in the debugger console.QML 디버그 연결로 qDebug() 및 비슷한 메시지를 전송합니다.
Qt Creator는 디버거 콘솔에 디버그 메시지를
표시할 수 있도록 이 서비스를 사용합니다.Other services offered by qmltooling plugins that implement QQmlDebugServiceFactory and which can be found in the standard plugin paths will also be available and can be specified. If no "services" argument is given, all services found this way, including the default ones, are loaded.표준 플러그인 경로에서 찾을 수 있는 QQmlDebugServiceFactory를 구현하는 qmltooling 플러그인도 사용할 수 있으며 여기에 지정할 수 있습니다. "services" 인자를 지정하지 않으면 기본 서비스를 포함하여 여기에 해당하는 모든 서비스를 불러옵니다.QQmlDelegateModelThe delegate of a DelegateModel cannot be changed within onUpdated.onUpdated 내에서 DelegateModel의 대리자를 변경할 수 없습니다.The maximum number of supported DelegateModelGroups is 8최대 8개까지 DelegateModelGroups를 지원합니다The group of a DelegateModel cannot be changed within onChangedonChanged 내에서 DelegateModel의 그룹을 변경할 수 없습니다QQmlDelegateModelGroupGroup names must start with a lower case letter그룹 이름은 소문자로 시작해야 함get: index out of rangeget: 인덱스가 범위를 벗어남insert: index out of rangeinsert: 인덱스가 범위를 벗어남create: index out of rangecreate: 인덱스가 범위를 벗어남resolve: from index out of rangeresolve: from 인덱스가 범위를 벗어남resolve: from index invalidresolve: from 인덱스가 잘못됨resolve: to index out of rangeresolve: to 인덱스가 범위를 벗어남resolve: to index invalidresolve: to 인덱스가 잘못됨resolve: from is not an unresolved itemresolve: from이 해결되지 않은 항목이 아님resolve: to is not a model itemresolve: to가 모델 항목이 아님remove: invalid indexremove: 잘못된 인덱스remove: index out of rangeremove: 인덱스가 범위를 벗어남remove: invalid countremove: 개수가 잘못됨addGroups: index out of rangeaddGroups: 인덱스가 범위를 벗어남addGroups: invalid countaddGroups: 잘못된 개수removeGroups: index out of rangeremoveGroups: 인덱스가 범위를 벗어남removeGroups: invalid countremoveGroups: 잘못된 개수setGroups: index out of rangesetGroups: 인덱스가 범위를 벗어남setGroups: invalid countsetGroups: 잘못된 개수move: invalid from indexmove: 잘못된 from 인덱스move: invalid to indexmove: 잘못된 to 인덱스move: invalid countmove: 잘못된 개수move: from index out of rangemove: from 인덱스가 범위를 벗어남move: to index out of rangemove: to 인덱스가 범위를 벗어남QQmlEngineLocale cannot be instantiated. Use Qt.locale()로캘의 인스턴스를 생성할 수 없습니다. Qt.locale()을 사용하십시오There are still "%1" items in the process of being created at engine destruction.엔진 삭제 중 생성되고 있는 "%1" 항목이 있습니다.executeSql called outside transaction()transaction() 밖에서 executeSql이 호출됨Read-only Transaction읽기 전용 트랜잭션Version mismatch: expected %1, found %2버전 불일치: 사용 중인 버전 %2, 필요한 버전 %1SQL transaction failedSQL 트랜잭션 실패transaction: missing callback트랜잭션: 콜백이 없음SQL: can't create database, offline storage is disabled.SQL: 데이터베이스를 만들 수 없음, 오프라인 저장소가 비활성화되었습니다.SQL: database version mismatchSQL: 데이터베이스 버전 불일치QQmlEnumTypeResolverInvalid property assignment: Enum value "%1" cannot start with a lowercase letter잘못된 속성 대입: 열거형 값 "%1"은(는) 소문자로 시작할 수 없음Invalid property assignment: "%1" is a read-only property잘못된 속성 대입: "%1"은(는) 읽기 전용 속성QQmlImportDatabase"%1" is ambiguous. Found in %2 and in %3"%1"이(가) 모호합니다. %2, %3에서 찾았습니다- %1 is not a namespace- %1이(가) 네임스페이스가 아님- nested namespaces not allowed- 중첩된 네임스페이스를 사용할 수 없음local directory로컬 디렉터리is ambiguous. Found in %1 and in %2이(가) 모호합니다. %1와(과) %2에서 찾았습니다is ambiguous. Found in %1 in version %2.%3 and %4.%5이(가) 모호합니다. %1에서 버전 %2.%3, %4.%5을(를) 찾았습니다is instantiated recursively이(가) 재귀적으로 인스턴스화되었습니다is not a type이(가) 형식이 아닙니다static plugin for module "%1" with name "%2" has no metadata URI이름이 "%2"인 모듈 "%1"의 정적 플러그인에 메타데이터 URI가 없음module does not support the designer "%1"모듈에서 디자이너 "%1"을(를) 지원하지 않음plugin cannot be loaded for module "%1": %2모듈 "%1"의 플러그인을 불러올 수 없음: %2static plugin for module "%1" with name "%2" cannot be loaded: %3이름이 "%2"인 모듈 "%1"의 정적 플러그인을 불러올 수 없음: %3could not resolve all plugins for module "%1"모듈 "%1"의 모든 플러그인을 처리할 수 없음module "%1" plugin "%2" not found모듈 "%1"의 플러그인 "%2"을(를) 찾을 수 없음library loading is disabled라이브러리 불러오기가 비활성화됨"%1" version %2.%3 is defined more than once in module "%4""%1" 버전 %2.%3이(가) 모듈 "%4"에 한 번 이상 정의되었음module "%1" version %2.%3 is not installed모듈 "%1"의 버전 %2.%3이(가) 설치되지 않았음module "%1" is not installed모듈 "%1"이(가) 설치되지 않았음"%1": no such directory"%1": 그러한 디렉터리가 없음import "%1" has no qmldir and no namespaceimport "%1"에 qmldir과 네임스페이스가 없음Module loaded for URI '%1' does not implement QQmlTypesExtensionInterfaceURI '%1'에서 불러온 모듈이 QQmlTypesExtensionInterface를 구현하지 않음Module namespace '%1' does not match import URI '%2'모듈 네임스페이스 '%1'이(가) 가져오기 URI '%2'와(과) 일치 않음Namespace '%1' has already been used for type registration네임스페이스 '%1'이(가) 형식 등록에 이미 사용됨Module '%1' does not contain a module identifier directive - it cannot be protected from external registrations.모듈 '%1'이(가) 모듈 식별자 선언을 포함하지 않음 - 외부 등록에서 보호받을 수 없습니다.File name case mismatch for "%1"파일 이름의 대소문자가 "%1"와(과) 일치하지 않음QQmlListModelunable to enable dynamic roles as this model is not empty!모델이 비어 있지 않아서 동적 역할을 사용할 수 없습니다!unable to enable static roles as this model is not empty!모델이 비어 있지 않아서 정적 역할을 사용할 수 없습니다!dynamic role setting must be made from the main thread, before any worker scripts are created동적 역할 설정은 작업자 스크립트가 생성되기 전 주 스레드에서 정의되어야 함remove: indices [%1 - %2] out of range [0 - %3]remove: 인덱스 [%1 - %2]이(가) 범위 [0 - %3]을(를) 벗어남remove: incorrect number of argumentsremove: 인자 개수가 잘못됨insert: index %1 out of rangeinsert: 인덱스 %1이(가) 범위를 벗어남insert: value is not an objectinsert: 값이 객체가 아님move: out of rangemove: 범위를 벗어남append: value is not an objectappend: 값이 객체가 아님set: value is not an objectset: 값이 객체가 아님set: index %1 out of rangeset: 인덱스 %1이(가) 범위를 벗어남ListElement: cannot contain nested elementsListElement: 중첩된 원소를 포함할 수 없음ListElement: cannot use reserved "id" propertyListElement: 예약된 "id" 속성을 사용할 수 없음ListElement: cannot use script for property valueListElement: 속성 값으로 스크립트를 사용할 수 없음ListModel: undefined property '%1'ListModel: 정의되지 않은 속성 '%1'QQmlObjectCreatorCannot assign value %1 to property %2속성 %2에 값 %1을(를) 할당할 수 없음Cannot set properties on %1 as it is null%1이(가) null이므로 속성을 설정할 수 없음Cannot assign an object to signal property %1객체를 시그널 속성 %1에 할당할 수 없음Cannot assign object type %1 with no default method객체 형식 %1에 기본 메서드를 지정하지 않고 할당할 수 없음Cannot connect mismatched signal/slot %1 %vs. %2일치하지 않는 시그널/슬롯 %1 %vs %2을(를) 연결할 수 없음Cannot assign object to interface property객체를 인터페이스 속성에 할당할 수 없음Cannot assign object to read only list읽기 전용 목록에 객체를 지정할 수 없음Cannot assign primitives to lists원시 타입을 목록에 할당할 수 없음Unable to create object of type %1형식 %1인 객체를 만들 수 없음Composite Singleton Type %1 is not creatable복합 싱글톤 형식 %1을(를) 만들 수 없음QQmlObjectModelinsert: index %1 out of rangeinsert: 인덱스 %1이(가) 범위를 벗어남move: out of rangemove: 범위를 벗어남remove: indices [%1 - %2] out of range [0 - %3]remove: 인덱스 [%1 - %2]이(가) 범위 [0 - %3]을(를) 벗어남QQmlParserImported file must be a script가져온 파일이 스크립트여야 함File import requires a qualifier파일을 가져오려면 지정가가 필요함Invalid import qualifier잘못된 가져오기 지정자Invalid module URI잘못된 모듈 URIModule import requires a version모듈을 가져오려면 버전이 필요함Module import requires a qualifier모듈을 가져오려면 지정자가 필요함Unexpected object definition예상하지 못한 객체 선언Invalid import qualifier ID잘못된 가져오기 식별자 IDReserved name "Qt" cannot be used as an qualifier예약됨 이름 "Qt"는 지정자 이름으로 사용할 수 없음Script import qualifiers must be unique.스크립트 가져오기 지정자는 고유해야 합니다.Script import requires a qualifier스크립트를 가져오려면 지정자가 필요함Library import requires a version라이브러리를 가져오려면 버전이 필요함Pragma requires a valid qualifierPragma에 올바른 지정자가 필요함Expected parameter type인자 type이 필요함Invalid signal parameter type: 잘못된 시그널 인자 종류:Invalid property type modifier잘못된 속성 type 수정자Unexpected property type modifier예상하지 못한 속성 type 수정자Expected property type속성 type이 필요함JavaScript declaration outside Script elementScript 원소 밖에서 자바스크립트가 선언됨Illegal syntax for exponential number잘못된 지수 문법Stray newline in string literal문자열 리터럴에 불필요한 빈 줄이 있음Illegal unicode escape sequence잘못된 유니코드 탈출 시퀀스Illegal hexadecimal escape sequence잘못된 16진 탈출 시퀀스Octal escape sequences are not allowed8진 탈출 시퀀스를 사용할 수 없음Unclosed string at end of line줄 끝에서 닫히지 않은 문자열Decimal numbers can't start with '0'10진 숫자가 '0'으로 시작할 수 없음At least one hexadecimal digit is required after '0%1''0%1' 다음에 최소 1개의 16진 숫자가 필요함Invalid regular expression flag '%0'잘못된 정규 표현식 플래그 '%0'Unterminated regular expression backslash sequence종료되지 않은 정규 표현식 백슬래시 시퀀스Unterminated regular expression class종료되지 않은 정규 표현식 클래스Unterminated regular expression literal끝나지 않은 정규 표현식 리터럴Syntax error구문 오류Unexpected token `%1'예상하지 못한 토큰 '%1'Expected token `%1'토큰 '%1'이(가) 필요함QQmlPartsModelThe group of a DelegateModel cannot be changed within onChangedonChanged 내에서 DelegateModel의 그룹을 변경할 수 없습니다Delegate component must be Package type.Delegate 컴포넌트는 Package 형식이어야 합니다.QQmlPropertyCacheCreatorFully dynamic types cannot declare new properties.완전 동적 형식에서는 새로운 속성을 선언할 수 없습니다.Fully dynamic types cannot declare new signals.완전 동적 형식에서는 새로운 시그널을 선언할 수 없습니다.Fully Dynamic types cannot declare new functions.완전 동적 형식에서는 새로운 함수를 선언할 수 없습니다.Non-existent attached object존재하지 않는 첨부된 개체Cannot override FINAL propertyFINAL 속성을 재정의할 수 없음Invalid signal parameter type: %1잘못된 시그널 인자 종류: %1Duplicate signal name: invalid override of property change signal or superclass signal중복된 시그널 이름: 속성 변경 시그널이나 상위 클래스의 시그널을 잘못 재정의함Duplicate method name: invalid override of property change signal or superclass signal중복된 메서드 이름: 속성 변경 시그널이나 상위 클래스의 시그널을 잘못 재정의함Invalid property type잘못된 속성 형식QQmlPropertyCacheCreatorBaseFully dynamic types cannot declare new properties.완전 동적 형식에서는 새로운 속성을 선언할 수 없습니다.Fully dynamic types cannot declare new signals.완전 동적 형식에서는 새로운 시그널을 선언할 수 없습니다.Fully Dynamic types cannot declare new functions.완전 동적 형식에서는 새로운 함수를 선언할 수 없습니다.Non-existent attached object존재하지 않는 첨부된 객체Cannot override FINAL propertyFINAL 속성을 재정의할 수 없음Invalid signal parameter type: %1잘못된 시그널 인자 종류: %1Duplicate signal name: invalid override of property change signal or superclass signal중복된 시그널 이름: 속성 변경 시그널이나 상위 클래스의 시그널을 잘못 재정의함Duplicate method name: invalid override of property change signal or superclass signal중복된 메서드 이름: 속성 변경 시그널이나 상위 클래스의 시그널을 잘못 재정의함Invalid property type잘못된 속성 형식QQmlPropertyValidatorProperty assignment expected속성 할당이 필요함Invalid use of namespace잘못된 네임스페이스 사용Invalid attached object assignment잘못된 첨부된 객체 할당"%1.%2" is not available in %3 %4.%5."%1.%2"은(는) %3 %4.%5에서 사용할 수 없습니다."%1.%2" is not available due to component versioning."%1.%2"은(는) 구성 요소 버전 때문에 사용할 수 없습니다.Cannot assign a value directly to a grouped property그룹 속성에 값을 직접 할당할 수 없음Attached properties cannot be used here여기에 첨부된 속성을 사용할 수 없음Invalid property assignment: "%1" is a read-only property잘못된 속성 대입: "%1"은(는) 읽기 전용 속성Cannot assign multiple values to a script property스크립트 속성에 다중 값을 할당할 수 없음Cannot assign multiple values to a singular property단일 속성에 여러 값을 할당할 수 없음Property has already been assigned a value속성에 이미 값이 할당됨Invalid grouped property access잘못된 그룹 속성 접근Cannot assign to non-existent default property존재하지 않는 기본 속성에 할당할 수 없음Cannot assign to non-existent property "%1"존재하지 않는 속성 "%1"에 할당할 수 없음Cannot assign primitives to lists원시 타입을 목록에 할당할 수 없음Invalid property assignment: unknown enumeration잘못된 속성 대입: 알 수 없는 열거형Invalid property assignment: string expected잘못된 속성 대입: 문자열이 필요함Invalid property assignment: string or string list expected잘못된 속성 대입: 문자열이나 문자열 목록이 필요함Invalid property assignment: byte array expected잘못된 속성 대입: 바이트 배열이 필요함Invalid property assignment: url expected잘못된 속성 대입: url이 필요함Invalid property assignment: unsigned int expected잘못된 속성 대입: 부호 없는 int가 필요함Invalid property assignment: int expected잘못된 속성 대입: int가 필요함Invalid property assignment: number expected잘못된 속성 대입: 숫자가 필요함Invalid property assignment: color expected잘못된 속성 대입: 색상이 필요함Invalid property assignment: date expected잘못된 속성 대입: 날짜가 필요함Invalid property assignment: time expected잘못된 속성 대입: 시간이 필요함Invalid property assignment: datetime expected잘못된 속성 대입: 날짜와 시간이 필요함Invalid property assignment: point expected잘못된 속성 대입: 점이 필요함Invalid property assignment: size expected잘못된 속성 대입: 크기가 필요함Invalid property assignment: rect expected잘못된 속성 대입: 사각형이 필요함Invalid property assignment: boolean expected잘못된 속성 대입: 참/거짓이 필요함Invalid property assignment: 2D vector expected잘못된 속성 대입: 2차원 벡터가 필요함Invalid property assignment: 3D vector expected잘못된 속성 대입: 3차원 벡터가 필요함Invalid property assignment: 4D vector expected잘못된 속성 대입: 4차원 벡터가 필요함Invalid property assignment: quaternion expected잘못된 속성 대입: 사원수가 필요함Invalid property assignment: regular expression expected; use /pattern/ syntax잘못된 속성 대입: 정규 표현식이 필요함, /pattern/ 문법 사용Invalid property assignment: number or array of numbers expected잘못된 속성 대입: 숫자 또는 숫자 배열이 필요함Invalid property assignment: int or array of ints expected잘못된 속성 대입: int 또는 int 배열이 필요함Invalid property assignment: bool or array of bools expected잘못된 속성 대입: bool 또는 bool 배열이 필요함Invalid property assignment: url or array of urls expected잘못된 속성 대입: url 또는 url 배열이 필요함Invalid property assignment: string or array of strings expected잘못된 속성 대입: string 또는 string 배열이 필요함Invalid property assignment: unsupported type "%1"잘못된 속성 대입: 지원하지 않는 형식 "%1""%1" cannot operate on "%2""%1"은(는) "%2"에서 작동할 수 없음Cannot assign object to list property "%1"객체를 목록 속성 "%1"에 할당할 수 없음Cannot assign object to list개체를 목록에 할당할 수 없음Unexpected object assignment예상하지 못한 객체 할당Invalid property assignment: script expected잘못된 속성 대입: script가 필요함Cannot assign object to property객체를 속성에 할당할 수 없음QQmlRewriteSignal uses unnamed parameter followed by named parameter.시그널의 이름 없는 인자 다음에 이름 있는 인자가 있습니다.Signal parameter "%1" hides global variable.시그널 인자 "%1"이(가) 전역 변수를 숨깁니다.QQmlTypeCompilerComposite Singleton Type %1 is not creatable.복합 싱글톤 형식 %1을(를) 만들 수 없습니다.Element is not creatable.원소를 만들 수 없습니다.QQmlTypeDataComposite Singleton Type %1 is not creatable.복합 싱글톤 형식 %1을(를) 만들 수 없습니다.Element is not creatable.원소를 만들 수 없습니다.QQmlTypeLoaderCannot update qmldir content for '%1''%1'의 qmldir 내용을 업데이트할 수 없음No matching type found, pragma Singleton files cannot be used by QQmlComponent.일치하는 형식을 찾을 수 없음, QQmlComponent에서는 pragma Singleton 파일을 사용할 수 없습니다.pragma Singleton used with a non composite singleton type %1비 복합 싱글톤 형식 %1에서 pragma Singleton이 사용됨Script %1 unavailable스크립트 %1을(를) 사용할 수 없음Type %1 unavailable형식 %1을(를) 사용할 수 없음qmldir defines type as singleton, but no pragma Singleton found in type %1.qmldir 내에서 싱글톤으로 선언하지만 형식 %1에서 pragma Singleton을 찾을 수 없습니다.module "%1" is not installed모듈 "%1"이(가) 설치되지 않았음Namespace %1 cannot be used as a type네임스페이스 %1을(를) 형식으로 사용할 수 없음Unreported error adding script import to import database가져오기 데이터베이스에 스크립트를 추가하는 중 보고되지 않은 오류 발생%1 %2%1 %2QQuickAbstractAnimationCannot animate non-existent property "%1"존재하지 않는 속성 "%1"에 애니메이션을 설정할 수 없음Cannot animate read-only property "%1"읽기 전용 속성 "%1"에 애니메이션을 설정할 수 없음Animation is an abstract classAnimation이 추상 클래스임Animator is an abstract classAnimator는 추상 클래스임QQuickAccessibleAttachedAccessible is only available via attached propertiesAccessible은 첨부된 속성을 통해서만 사용할 수 있음QQuickAnchorAnimationCannot set a duration of < 00보다 작은 지속 시간을 설정할 수 없음QQuickAnchorsPossible anchor loop detected on fill.fill에서 앵커 반복 감지됨.Possible anchor loop detected on centerIn.centerIn에서 앵커 반복 감지됨.Cannot anchor to an item that isn't a parent or sibling.부모나 자식이 아닌 항목에 앵커를 설정할 수 없음.Possible anchor loop detected on vertical anchor.수직 앵커에서 앵커 반복 감지됨.Possible anchor loop detected on horizontal anchor.수평 앵커에서 앵커 반복 감지됨.Cannot specify left, right, and horizontalCenter anchors at the same time.동시에 left, right, horizontalCenter 앵커를 지정할 수 없습니다.Cannot anchor to a null item.빈 항목에 앵커를 설정할 수 없음.Cannot anchor a horizontal edge to a vertical edge.수평선을 수직선에 앵커로 설정할 수 없음.Cannot anchor item to self.자기 자신에 앵커를 설정할 수 없음.Cannot specify top, bottom, and verticalCenter anchors at the same time.동시에 top, bottom, verticalCenter 앵커를 지정할 수 없습니다.Baseline anchor cannot be used in conjunction with top, bottom, or verticalCenter anchors.Baseline 앵커는 top, bottom, verticalCenter 앵커와 동시에 사용할 수 없습니다.Cannot anchor a vertical edge to a horizontal edge.수직선을 수평선에 앵커로 설정할 수 없음.QQuickAnimatedImageQt was built without support for QMovieQt 빌드에 QMovie 지원이 빠졌음QQuickApplicationApplication is an abstract classApplication은 추상 클래스임QQuickBehaviorCannot change the animation assigned to a Behavior.Behavior에 할당된 애니메이션을 변경할 수 없음.QQuickDragAttachedDrag is only available via attached propertiesDrag는 첨부된 속성을 통해서만 사용할 수 있음QQuickEnterKeyAttachedEnterKey attached property only works with ItemsEnterKey 첨부된 속성은 Item에서만 동작함EnterKey is only available via attached propertiesEnterKeys는 첨부된 속성을 통해서만 사용할 수 있음QQuickFlipablefront is a write-once propertyfront는 한 번만 쓸 수 있는 속성임back is a write-once propertyback은 한 번만 쓸 수 있는 속성임QQuickGraphicsInfoGraphicsInfo is only available via attached propertiesGraphicsInfo는 첨부된 속성을 통해서만 사용할 수 있음QQuickItemViewItemView is an abstract base classItemView는 추상 기반 클래스임Delegate must be of Item typeDelegate는 Item 형식이어야 함QQuickKeyNavigationAttachedKeyNavigation is only available via attached propertiesKeyNavigation은 첨부된 속성을 통해서만 사용할 수 있음QQuickKeysAttachedKeys is only available via attached propertiesKeys는 첨부된 속성을 통해서만 사용할 수 있음QQuickLayoutMirroringAttachedLayoutDirection attached property only works with Items연결된 속성 LayoutDirection은 Item에서만 동작함LayoutMirroring is only available via attached propertiesLayoutMirroring은 첨부된 속성을 통해서만 사용할 수 있음LayoutDirection attached property only works with Items and Windows첨부된 속성 LayoutDirection은 Item이나 Window에서만 동작함QQuickLoadersetSource: value is not an objectsetSource: 값이 객체가 아님QQuickMouseEventMouseEvent is only available within handlers in MouseAreaMouseEvent는 MouseArea의 핸들러에서만 사용할 수 있음QQuickOpenGLInfoOpenGLInfo is only available via attached propertiesOpenGLInfo는 첨부된 속성을 통해서만 사용할 수 있음QQuickPaintedItemCannot create instance of abstract class PaintedItem추상 클래스 PaintedItem의 인스턴스를 만들 수 없음QQuickParentAnimationUnable to preserve appearance under complex transform복합 변형 이후 모양을 보존할 수 없음Unable to preserve appearance under non-uniform scale불균일 크기 조정 이후 모양을 보존할 수 없음Unable to preserve appearance under scale of 00 이하로 크기를 조정했을 때 모양을 보존할 수 없음QQuickParentChangeUnable to preserve appearance under complex transform복합 변형 이후 모양을 보존할 수 없음Unable to preserve appearance under non-uniform scale불균일 크기 조정 이후 모양을 보존할 수 없음Unable to preserve appearance under scale of 00 이하로 크기를 조정했을 때 모양을 보존할 수 없음QQuickPathAnimationCannot set a duration of < 00보다 작은 지속 시간을 설정할 수 없음QQuickPathViewDelegate must be of Item typeDelegate는 Item 형식이어야 함QQuickPauseAnimationCannot set a duration of < 00보다 작은 지속 시간을 설정할 수 없음QQuickPixmapError decoding: %1: %2%1 디코딩 중 오류 발생: %2Invalid image provider: %1잘못된 그림 공급자: %1Failed to get image from provider: %1공급자에서 그림을 가져올 수 없음: %1Failed to get texture from provider: %1공급자에서 텍스처를 가져올 수 없음: %1Cannot open: %1다음을 열 수 없음: %1Invalid image data: %1잘못된 그림 데이터: %1QQuickPropertyAnimationCannot set a duration of < 00보다 작은 지속 시간을 설정할 수 없음QQuickPropertyChangesPropertyChanges does not support creating state-specific objects.PropertyChanges는 상태별 객체를 만들 수 없습니다.Cannot assign to non-existent property "%1"존재하지 않는 속성 "%1"에 할당할 수 없음Cannot assign to read-only property "%1"읽기 전용 속성 "%1"에 할당할 수 없음QQuickRepeaterDelegate must be of Item typeDelegate는 Item 형식이어야 함QQuickShaderEffectMeshCannot create instance of abstract class ShaderEffectMesh.추상 클래스 ShaderEffectMesh의 인스턴스를 만들 수 없습니다.QQuickTextUtil%1 does not support loading non-visual cursor delegates.%1에서 표시할 수 없는 커서 선언을 불러올 수 없습니다.Could not load cursor delegate커서 선언을 불러올 수 없음QQuickViewTransitionAttachedViewTransition is only available via attached propertiesViewTransition은 첨부된 속성을 통해서만 사용할 수 있음QQuickWindowFailed to create %1 context for format %2.
This is most likely caused by not having the necessary graphics drivers installed.
Install a driver providing OpenGL 2.0 or higher, or, if this is not possible, make sure the ANGLE Open GL ES 2.0 emulation libraries (%3, %4 and d3dcompiler_*.dll) are available in the application executable's directory or in a location listed in PATH.%1 Context type (Open GL, EGL), %2 format, ANGLE %3, %4 library names형식 %2에 대한 %1 컨텍스트를 생성할 수 없습니다.
필요한 그래픽 드라이버가 설치되어 있지 않을 수도 있습니다.
OpenGL 2.0 이상을 지원하는 드라이버를 설치하시거나, 해당 드라이버를 사용할 수 없다면 실행 파일이 있는 디렉터리나 PATH에 있는 디렉터리에 ANGLE OpenGL ES 2.0 에뮬레이션 라이브러리(%3, %4, d3dcompiler_*.dll)를 설치하십시오.Failed to create %1 context for format %2%1 Context type (Open GL, EGL), %2 format specification형식 %2에 대한 %1 컨텍스트를 생성할 수 없음QQuickWindowQmlImplConflicting properties 'visible' and 'visibility' for Window '%1'창 '%1'의 'visible'과 'visibility' 속성이 충돌함Conflicting properties 'visible' and 'visibility''visible'과 'visibility' 속성이 충돌함QQuickXmlListModel"%1" duplicates a previous role name and will be disabled."%1"이(가) 이전 역할 이름과 중복되므로 비활성화될 것입니다.invalid query: "%1"잘못된 쿼리: "%1"QQuickXmlListModelRoleAn XmlRole query must not start with '/'XmlRole 쿼리는 '/'로 시작하면 안 됨QQuickXmlRoleListAn XmlListModel query must start with '/' or "//"XmlListModel 쿼리는 '/'나 '//'로 시작해야 함SignalHandlerConverterNon-existent attached object존재하지 않는 첨부된 객체Signal uses unnamed parameter followed by named parameter.시그널의 이름 없는 인자 다음에 이름 있는 인자가 있습니다.Signal parameter "%1" hides global variable.시그널 인자 "%1"이(가) 전역 변수를 숨깁니다."%1.%2" is not available in %3 %4.%5."%1.%2"은(는) %3 %4.%5에서 사용할 수 없습니다."%1.%2" is not available due to component versioning."%1.%2"은(는) 구성 요소 버전 때문에 사용할 수 없습니다.Cannot assign a value to a signal (expecting a script to be run)값을 시그널에 지정할 수 없음 (스크립트가 실행될 것을 예상함)Incorrectly specified signal assignment잘못 지정된 시그널 할당SignalTransitionSpecified signal does not exist.지정한 시그널이 존재하지 않습니다.Cannot assign to non-existent property "%1"존재하지 않는 속성 "%1"에 할당할 수 없음SignalTransition: script expectedSignalTransition: 스크립트가 필요함qmlRegisterTypeInvalid QML %1 name "%2"잘못된 QML %1 이름 "%2"Cannot install %1 '%2' into unregistered namespace '%3'등록되지 않은 네임스페이스 '%3'에 %1 '%2'을(를) 설치할 수 없음Cannot install %1 '%2' into protected namespace '%3'보호된 네임스페이스 '%3'에 %1 '%2'을(를) 설치할 수 없음Cannot install %1 '%2' into protected module '%3' version '%4'보호된 모듈 '%3' 버전 '%4'에 %1 '%2'을(를) 설치할 수 없음