/****************************************************************************
**
** Copyright (C) 2015 The Qt Company Ltd.
** Contact: http://www.qt.io/licensing/
**
** This file is part of the QtLocation module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL3$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see http://www.qt.io/terms-conditions. For further
** information use the contact form at http://www.qt.io/contact-us.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 3 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPLv3 included in the
** packaging of this file. Please review the following information to
** ensure the GNU Lesser General Public License version 3 requirements
** will be met: https://www.gnu.org/licenses/lgpl.html.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU
** General Public License version 2.0 or later as published by the Free
** Software Foundation and appearing in the file LICENSE.GPL included in
** the packaging of this file. Please review the following information to
** ensure the GNU General Public License version 2.0 requirements will be
** met: http://www.gnu.org/licenses/gpl-2.0.html.
**
** $QT_END_LICENSE$
**
****************************************************************************/

#include "qdeclarativegeoroutemodel_p.h"
#include "qdeclarativegeoroute_p.h"
#include "error_messages_p.h"
#include "locationvaluetypehelper_p.h"

#include <QtCore/QCoreApplication>
#include <QtQml/QQmlEngine>
#include <QtQml/qqmlinfo.h>
#include <QtQml/private/qqmlengine_p.h>
#include <QtQml/private/qv4scopedvalue_p.h>
#include <QtQml/private/qv4arrayobject_p.h>
#include <QtLocation/QGeoRoutingManager>
#include <QtPositioning/QGeoRectangle>
#include "qdeclarativegeomapparameter_p.h"

QT_BEGIN_NAMESPACE

static bool compareFloats(qreal a, qreal b)
{
    return (qIsNaN(a) && qIsNaN(b))
           || a == b;
}

static bool compareParameterList(const QList<QDeclarativeGeoMapParameter *> &a, const QList<QDeclarativeGeoMapParameter *> &b)
{
    if (a.size() != b.size())
        return false;
    if (a != b) {
        for (int i = 0; i < a.size(); ++i) {
            if (! (*a.at(i) == *b.at(i)))
                return false;
        }
    }
    return true;
}

static int findWaypoint(const QList<QDeclarativeGeoWaypoint *> &waypoints, const QDeclarativeGeoWaypoint *w)
{
    for (int i = waypoints.size() - 1; i >= 0; --i) {
        if (waypoints.at(i) == w || *waypoints.at(i) == *w)
            return i;
    }
    return -1;
}

static int findWaypoint(const QList<QDeclarativeGeoWaypoint *> &waypoints, const QGeoCoordinate &c)
{
    for (int i = waypoints.size() - 1; i >= 0; --i) {
        if (waypoints.at(i)->coordinate() == c)
            return i;
    }
    return -1;
}

static QList<QGeoCoordinate> waypointCoordinates(const QList<QDeclarativeGeoWaypoint *> &waypoints)
{
    QList<QGeoCoordinate> res;
    for (const QDeclarativeGeoWaypoint *w: waypoints)
        res << w->coordinate();
    return res;
}

static QList<QVariantMap> waypointMetadata(const QList<QDeclarativeGeoWaypoint *> &waypoints)
{
    QList<QVariantMap> res;
    for (QDeclarativeGeoWaypoint *w: waypoints)
        res << w->metadata();
    return res;
}

/*!
    \qmltype RouteModel
    \instantiates QDeclarativeGeoRouteModel
    \inqmlmodule QtLocation
    \ingroup qml-QtLocation5-routing
    \since QtLocation 5.5

    \brief The RouteModel type provides access to routes.

    The RouteModel type is used as part of a model/view grouping to retrieve
    geographic routes from a backend provider. Routes include data about driving
    directions between two points, walking directions with multiple waypoints,
    and various other similar concepts. It functions much like other Model
    types in QML (see for example \l {Models and Views in Qt Quick#Models}{ListModel}
    and \l {QtQuick.XmlListModel::XmlListModel}{XmlListModel}), and interacts with
    views such as \l MapItemView, and \l{ListView}.

    Like \l Map and \l GeocodeModel, all the data for a RouteModel to work comes
    from a services plugin. This is contained in the \l{plugin} property, and
    this must be set before the RouteModel can do any useful work.

    Once the plugin is set, create a \l RouteQuery with the appropriate
    waypoints and other settings, and set the RouteModel's \l{query}
    property. If \l autoUpdate is enabled, the update will being automatically.
    Otherwise, the \l{update} method may be used. By default, autoUpdate is
    disabled.

    The data stored and returned in the RouteModel consists of \l Route objects,
    as a list with the role name "routeData". See the documentation for \l Route
    for further details on its structure and contents.

    \section2 Example Usage

    The following snippet is two-part, showing firstly the declaration of
    objects, and secondly a short piece of procedural code using it. We set
    the routeModel's \l{autoUpdate} property to false, and call \l{update} once
    the query is set up, to avoid useless extra requests halfway through the
    set up of the query.

    \code
    Plugin {
        id: aPlugin
        name: "osm"
    }

    RouteQuery {
        id: aQuery
    }

    RouteModel {
        id: routeModel
        plugin: aPlugin
        query: aQuery
        autoUpdate: false
    }
    \endcode

    \code
    {
        aQuery.addWaypoint(...)
        aQuery.addWaypoint(...)
        aQuery.travelModes = ...
        routeModel.update()
    }
    \endcode

*/

QDeclarativeGeoRouteModel::QDeclarativeGeoRouteModel(QObject *parent)
    : QAbstractListModel(parent),
      complete_(false),
      plugin_(0),
      routeQuery_(0),
      autoUpdate_(false),
      status_(QDeclarativeGeoRouteModel::Null),
      error_(QDeclarativeGeoRouteModel::NoError)
{
}

QDeclarativeGeoRouteModel::~QDeclarativeGeoRouteModel()
{
    if (!routes_.empty()) {
        qDeleteAll(routes_);
        routes_.clear();
    }
}

/*!
    \qmlproperty int QtLocation::RouteModel::count

    This property holds how many routes the model currently has.
    Amongst other uses, you can use this value when accessing routes
    via the QtLocation::RouteModel::get -method.
*/

int QDeclarativeGeoRouteModel::count() const
{
    return routes_.count();
}

/*!
    \qmlmethod void QtLocation::RouteModel::reset()

    Resets the model. All route data is cleared, any outstanding requests
    are aborted and possible errors are cleared. Model status will be set
    to RouteModel.Null
*/

void QDeclarativeGeoRouteModel::reset()
{
    if (!routes_.isEmpty()) {
        beginResetModel();
        qDeleteAll(routes_);
        routes_.clear();
        emit countChanged();
        emit routesChanged();
        endResetModel();
    }

    emit abortRequested();
    setError(NoError, QString());
    setStatus(QDeclarativeGeoRouteModel::Null);
}

/*!
    \qmlmethod void QtLocation::RouteModel::cancel()

    Cancels any outstanding requests and clears errors.  Model status will be set to either
    RouteModel.Null or RouteModel.Ready.
*/
void QDeclarativeGeoRouteModel::cancel()
{
    emit abortRequested();
    setError(NoError, QString());
    setStatus(routes_.isEmpty() ? Null : Ready);
}

/*!
    \qmlmethod Route QtLocation::RouteModel::get(int index)

    Returns the Route at the specified \a index. Use the \l count
    property to check the amount of routes available. The routes
    are indexed from zero, so the accessible range is 0...(count - 1).

    If you access out of bounds, a zero (null object) is returned and
    a warning is issued.
*/

QDeclarativeGeoRoute *QDeclarativeGeoRouteModel::get(int index)
{
    if (index < 0 || index >= routes_.count()) {
        qmlWarning(this) << QStringLiteral("Index '%1' out of range").arg(index);
        return 0;
    }
    return routes_.at(index);
}

/*!
    \internal
*/
void QDeclarativeGeoRouteModel::componentComplete()
{
    complete_ = true;
    if (autoUpdate_) {
        update();
    }
}

/*!
    \internal
*/
int QDeclarativeGeoRouteModel::rowCount(const QModelIndex &parent) const
{
    Q_UNUSED(parent);
    return routes_.count();
}

/*!
    \internal
*/
QVariant QDeclarativeGeoRouteModel::data(const QModelIndex &index, int role) const
{
    if (!index.isValid()) {
        qmlWarning(this) << QStringLiteral("Error in indexing route model's data (invalid index).");
        return QVariant();
    }

    if (index.row() >= routes_.count()) {
        qmlWarning(this) << QStringLiteral("Fatal error in indexing route model's data (index overflow).");
        return QVariant();
    }

    if (role == RouteRole) {
        QObject *route = routes_.at(index.row());
        return QVariant::fromValue(route);
    }
    return QVariant();
}

QHash<int, QByteArray> QDeclarativeGeoRouteModel::roleNames() const
{
    QHash<int, QByteArray> roleNames = QAbstractListModel::roleNames();
    roleNames.insert(RouteRole, "routeData");
    return roleNames;
}

/*!
    \internal
*/
void QDeclarativeGeoRouteModel::setPlugin(QDeclarativeGeoServiceProvider *plugin)
{
    if (plugin_ == plugin)
        return;

    reset(); // reset the model

    if (plugin_)
        disconnect(plugin_, SIGNAL(localesChanged()), this, SIGNAL(measurementSystemChanged()));
    if (plugin)
        connect(plugin, SIGNAL(localesChanged()), this, SIGNAL(measurementSystemChanged()));

    plugin_ = plugin;

    if (complete_)
        emit pluginChanged();

    if (!plugin)
        return;

    if (plugin_->isAttached()) {
        pluginReady();
    } else {
        connect(plugin_, SIGNAL(attached()),
                this, SLOT(pluginReady()));
    }
}

/*!
    \internal
*/
void QDeclarativeGeoRouteModel::pluginReady()
{
    QGeoServiceProvider *serviceProvider = plugin_->sharedGeoServiceProvider();
    QGeoRoutingManager *routingManager = serviceProvider->routingManager();

    if (serviceProvider->routingError() != QGeoServiceProvider::NoError) {
        QDeclarativeGeoRouteModel::RouteError newError = UnknownError;
        switch (serviceProvider->routingError()) {
        case QGeoServiceProvider::NotSupportedError:
            newError = EngineNotSetError; break;
        case QGeoServiceProvider::UnknownParameterError:
            newError = UnknownParameterError; break;
        case QGeoServiceProvider::MissingRequiredParameterError:
            newError = MissingRequiredParameterError; break;
        case QGeoServiceProvider::ConnectionError:
            newError = CommunicationError; break;
        default:
            break;
        }

        setError(newError, serviceProvider->routingErrorString());
        return;
    }

    if (!routingManager) {
        setError(EngineNotSetError, tr("Plugin does not support routing."));
        return;
    }

    connect(routingManager, SIGNAL(finished(QGeoRouteReply*)),
            this, SLOT(routingFinished(QGeoRouteReply*)));
    connect(routingManager, SIGNAL(error(QGeoRouteReply*,QGeoRouteReply::Error,QString)),
            this, SLOT(routingError(QGeoRouteReply*,QGeoRouteReply::Error,QString)));
}

/*!
    \internal
*/
void QDeclarativeGeoRouteModel::queryDetailsChanged()
{
    if (autoUpdate_ && complete_)
        update();
}

/*!
    \qmlproperty Plugin QtLocation::RouteModel::plugin

    This property holds the plugin that providers the actual
    routing service. Note that all plugins do not necessarily
    provide routing (could for example provide only geocoding or maps).

    A valid plugin must be set before the RouteModel can perform any useful
    operations.

    \sa Plugin
*/

QDeclarativeGeoServiceProvider *QDeclarativeGeoRouteModel::plugin() const
{
    return plugin_;
}

/*!
    \internal
*/
void QDeclarativeGeoRouteModel::setQuery(QDeclarativeGeoRouteQuery *query)
{
    if (!query || query == routeQuery_)
        return;
    if (routeQuery_)
        routeQuery_->disconnect(this);
    routeQuery_ = query;
    connect(query, SIGNAL(queryDetailsChanged()), this, SLOT(queryDetailsChanged()));
    if (complete_) {
        emit queryChanged();
        if (autoUpdate_)
            update();
    }
}

/*!
    \qmlproperty RouteQuery QtLocation::RouteModel::query

    This property holds the data of the route request.
    The primary data are the waypoint coordinates and possible further
    preferences (means of traveling, things to avoid on route etc).
*/

QDeclarativeGeoRouteQuery *QDeclarativeGeoRouteModel::query() const
{
    return routeQuery_;
}

/*!
    \internal
*/
void QDeclarativeGeoRouteModel::setAutoUpdate(bool autoUpdate)
{
    if (autoUpdate_ == autoUpdate)
        return;
    autoUpdate_ = autoUpdate;
    if (complete_)
        emit autoUpdateChanged();
}

/*!
    \qmlproperty bool QtLocation::RouteModel::autoUpdate

    This property controls whether the Model automatically updates in response
    to changes in its attached RouteQuery. The default value of this property
    is false.

    If setting this value to 'true', note that any change at all in
    the RouteQuery object set in the \l{query} property will trigger a new
    request to be sent. If you are adjusting many properties of the RouteQuery
    with autoUpdate enabled, this can generate large numbers of useless (and
    later discarded) requests.
*/

bool QDeclarativeGeoRouteModel::autoUpdate() const
{
    return autoUpdate_;
}

/*!
    \qmlproperty Locale::MeasurementSystem QtLocation::RouteModel::measurementSystem

    This property holds the measurement system which will be used when calculating the route. This
    property is changed when the \l {QtLocation::Plugin::locales}{Plugin::locales} property of
    \l {QtLocation::RouteModel::plugin}{plugin} changes.

    If setting this property it must be set after the \l {QtLocation::RouteModel::plugin}{plugin}
    property is set.
*/
void QDeclarativeGeoRouteModel::setMeasurementSystem(QLocale::MeasurementSystem ms)
{
    if (!plugin_)
        return;

    QGeoServiceProvider *serviceProvider = plugin_->sharedGeoServiceProvider();
    if (!serviceProvider)
        return;

    QGeoRoutingManager *routingManager = serviceProvider->routingManager();
    if (!routingManager)
        return;

    if (routingManager->measurementSystem() == ms)
        return;

    routingManager->setMeasurementSystem(ms);
    emit measurementSystemChanged();
}

QLocale::MeasurementSystem QDeclarativeGeoRouteModel::measurementSystem() const
{
    if (!plugin_)
        return QLocale().measurementSystem();

    QGeoServiceProvider *serviceProvider = plugin_->sharedGeoServiceProvider();
    if (!serviceProvider) {
        if (plugin_->locales().isEmpty())
            return QLocale().measurementSystem();

        return QLocale(plugin_->locales().first()).measurementSystem();
    }

    QGeoRoutingManager *routingManager = serviceProvider->routingManager();
    if (!routingManager) {
        if (plugin_->locales().isEmpty())
            return QLocale().measurementSystem();

        return QLocale(plugin_->locales().first()).measurementSystem();
    }

    return routingManager->measurementSystem();
}

/*!
    \internal
*/
void QDeclarativeGeoRouteModel::setStatus(QDeclarativeGeoRouteModel::Status status)
{
    if (status_ == status)
        return;

    status_ = status;

    if (complete_)
        emit statusChanged();
}

/*!
    \qmlproperty enumeration QtLocation::RouteModel::status

    This read-only property holds the current status of the model.

    \list
    \li RouteModel.Null - No route requests have been issued or \l reset has been called.
    \li RouteModel.Ready - Route request(s) have finished successfully.
    \li RouteModel.Loading - Route request has been issued but not yet finished
    \li RouteModel.Error - Routing error has occurred, details are in \l error and \l errorString
    \endlist
*/

QDeclarativeGeoRouteModel::Status QDeclarativeGeoRouteModel::status() const
{
    return status_;
}

/*!
    \qmlproperty string QtLocation::RouteModel::errorString

    This read-only property holds the textual presentation of the latest routing error.
    If no error has occurred or the model has been reset, an empty string is returned.

    An empty string may also be returned if an error occurred which has no associated
    textual representation.
*/

QString QDeclarativeGeoRouteModel::errorString() const
{
    return errorString_;
}

/*!
    \qmlproperty enumeration QtLocation::RouteModel::error

    This read-only property holds the latest error value of the routing request.

    \list
    \li RouteModel.NoError - No error has occurred.
    \li RouteModel.CommunicationError - An error occurred while communicating with the service provider.
    \li RouteModel.EngineNotSetError - The model's plugin property was not set or there is no routing manager associated with the plugin.
    \li RouteModel.MissingRequiredParameterError - A required parameter was not specified.
    \li RouteModel.ParseError - The response from the service provider was in an unrecognizable format.
    \li RouteModel.UnknownError - An error occurred which does not fit into any of the other categories.
    \li RouteModel.UnknownParameterError - The plugin did not recognize one of the parameters it was given.
    \li RouteModel.UnsupportedOptionError - The requested operation is not supported by the routing provider.
                                            This may happen when the loaded engine does not support a particular
                                            type of routing request.
    \endlist
*/

QDeclarativeGeoRouteModel::RouteError QDeclarativeGeoRouteModel::error() const
{
    return error_;
}

void QDeclarativeGeoRouteModel::setError(RouteError error, const QString& errorString)
{
    if (error_ == error && errorString_ == errorString)
        return;
    error_ = error;
    errorString_ = errorString;
    emit errorChanged();
}

/*!
    \qmlmethod void QtLocation::RouteModel::update()

    Instructs the RouteModel to update its data. This is most useful
    when \l autoUpdate is disabled, to force a refresh when the query
    has been changed.
*/
void QDeclarativeGeoRouteModel::update()
{
    if (!complete_)
        return;

    if (!plugin_) {
        setError(EngineNotSetError, tr("Cannot route, plugin not set."));
        return;
    }

    QGeoServiceProvider *serviceProvider = plugin_->sharedGeoServiceProvider();
    if (!serviceProvider)
        return;

    QGeoRoutingManager *routingManager = serviceProvider->routingManager();
    if (!routingManager) {
        setError(EngineNotSetError, tr("Cannot route, route manager not set."));
        return;
    }
    if (!routeQuery_) {
        setError(ParseError, tr("Cannot route, valid query not set."));
        return;
    }
    emit abortRequested(); // Clear previous requests
    QGeoRouteRequest request = routeQuery_->routeRequest();
    if (request.waypoints().count() < 2) {
        setError(ParseError,tr("Not enough waypoints for routing."));
        return;
    }

    setError(NoError, QString());

    QGeoRouteReply *reply = routingManager->calculateRoute(request);
    setStatus(QDeclarativeGeoRouteModel::Loading);
    if (!reply->isFinished()) {
        connect(this, &QDeclarativeGeoRouteModel::abortRequested, reply, &QGeoRouteReply::abort);
    } else {
        if (reply->error() == QGeoRouteReply::NoError) {
            routingFinished(reply);
        } else {
            routingError(reply, reply->error(), reply->errorString());
        }
    }
}

/*!
    \internal
*/
void QDeclarativeGeoRouteModel::routingFinished(QGeoRouteReply *reply)
{
    if (!reply)
        return;
    reply->deleteLater();
    if (reply->error() != QGeoRouteReply::NoError)
        return;

    beginResetModel();
    int oldCount = routes_.count();
    qDeleteAll(routes_);
    // Convert routes to declarative
    routes_.clear();
    for (int i = 0; i < reply->routes().size(); ++i) {
        QDeclarativeGeoRoute *route = new QDeclarativeGeoRoute(reply->routes().at(i), this);
        QQmlEngine::setContextForObject(route, QQmlEngine::contextForObject(this));
        routes_.append(route);
    }
    endResetModel();

    setError(NoError, QString());
    setStatus(QDeclarativeGeoRouteModel::Ready);

    if (oldCount != 0 || routes_.count() != 0)
        emit routesChanged();
    if (oldCount != routes_.count())
        emit countChanged();
}

/*!
    \internal
*/
void QDeclarativeGeoRouteModel::routingError(QGeoRouteReply *reply,
                                               QGeoRouteReply::Error error,
                                               const QString &errorString)
{
    if (!reply)
        return;
    reply->deleteLater();
    setError(static_cast<QDeclarativeGeoRouteModel::RouteError>(error), errorString);
    setStatus(QDeclarativeGeoRouteModel::Error);
}


/*!
    \qmltype RouteQuery
    \instantiates QDeclarativeGeoRouteQuery
    \inqmlmodule QtLocation
    \ingroup qml-QtLocation5-routing
    \since QtLocation 5.5

    \brief The RouteQuery type is used to provide query parameters to a
           RouteModel.

    A RouteQuery is used to pack all the parameters necessary to make a request
    to a routing service, which can then populate the contents of a RouteModel.

    These parameters describe key details of the route, such as \l waypoints to
    pass through, \l excludedAreas to avoid, the \l travelModes in use, as well
    as detailed preferences on how to optimize the route and what features
    to prefer or avoid along the path (such as toll roads, highways, etc).

    RouteQuery objects are used exclusively to fill out the value of a
    RouteModel's \l{RouteModel::query}{query} property, which can then begin
    the retrieval process to populate the model.

    Some plugins might allow or require specific parameters to operate.
    In order to specify these plugin-specific parameters, MapParameter elements
    can be nested inside a RouteQuery.

    \section2 Example Usage

    The following snipped shows an incomplete example of creating a RouteQuery
    object and setting it as the value of a RouteModel's \l{RouteModel::query}{query}
    property.

    \code
    RouteQuery {
        id: aQuery
    }

    RouteModel {
        query: aQuery
        autoUpdate: false
    }
    \endcode

    For a more complete example, see the documentation for the \l{RouteModel}
    type, and the Mapviewer example.

    \sa RouteModel

*/

QDeclarativeGeoRouteQuery::QDeclarativeGeoRouteQuery(QObject *parent)
:   QObject(parent), complete_(false), m_excludedAreaCoordinateChanged(false)
{
}

QDeclarativeGeoRouteQuery::QDeclarativeGeoRouteQuery(const QGeoRouteRequest &request, QObject *parent)
:   QObject(parent), request_(request), complete_(false), m_excludedAreaCoordinateChanged(false)
{
    // Extra params assumed to be already set in the request.
    // Init waypoints
    const QList<QGeoCoordinate> wpts = request_.waypoints();
    const QList<QVariantMap> meta = request_.waypointsMetadata();
    for (int i = 0; i < wpts.size(); ++i) {
        QDeclarativeGeoWaypoint *w = new QDeclarativeGeoWaypoint(this);
        w->setCoordinate(wpts.at(i));
        w->setMetadata(meta.at(i));
        m_waypoints << w;
    }
}

QDeclarativeGeoRouteQuery::~QDeclarativeGeoRouteQuery()
{
}

/*!
    \internal
*/
void QDeclarativeGeoRouteQuery::componentComplete()
{
    complete_ = true;
}

/*!
    \qmlproperty QList<FeatureType> RouteQuery::featureTypes

    List of features that will be considered when planning the
    route. Features with a weight of NeutralFeatureWeight will not be returned.

    \list
    \li RouteQuery.NoFeature - No features will be taken into account when planning the route
    \li RouteQuery.TollFeature - Consider tollways when planning the route
    \li RouteQuery.HighwayFeature - Consider highways when planning the route
    \li RouteQuery.PublicTransitFeature - Consider public transit when planning the route
    \li RouteQuery.FerryFeature - Consider ferries when planning the route
    \li RouteQuery.TunnelFeature - Consider tunnels when planning the route
    \li RouteQuery.DirtRoadFeature - Consider dirt roads when planning the route
    \li RouteQuery.ParksFeature - Consider parks when planning the route
    \li RouteQuery.MotorPoolLaneFeature - Consider motor pool lanes when planning the route
    \li RouteQuery.TrafficFeature - Consider traffic when planning the route
    \endlist

    \sa setFeatureWeight, featureWeight
*/

QList<int> QDeclarativeGeoRouteQuery::featureTypes()
{
    QList<int> list;

    for (int i = 0; i < request_.featureTypes().count(); ++i) {
        list.append(static_cast<int>(request_.featureTypes().at(i)));
    }
    return list;
}

/*!
    \qmlproperty int RouteQuery::numberAlternativeRoutes

    The number of alternative routes requested when requesting routes.
    The default value is 0.
*/


int QDeclarativeGeoRouteQuery::numberAlternativeRoutes() const
{
    return request_.numberAlternativeRoutes();
}

void QDeclarativeGeoRouteQuery::setNumberAlternativeRoutes(int numberAlternativeRoutes)
{
    if (numberAlternativeRoutes == request_.numberAlternativeRoutes())
        return;

    request_.setNumberAlternativeRoutes(numberAlternativeRoutes);

    if (complete_) {
        emit numberAlternativeRoutesChanged();
        emit queryDetailsChanged();
    }
}

/*!
    \qmlproperty list<coordinate> RouteQuery::waypoints


    The coordinates of the waypoints for the desired route.
    The waypoints should be given in order from origin to destination.
    Two or more coordinates are needed.

    Waypoints can be set as part of the RouteQuery type declaration or
    dynamically with the functions provided.

    When setting this property to a list of waypoints, each waypoint
    can be either a \l coordinate or a \l Waypoint, interchangeably.
    If a \l coordinate is passed, it will be internally converted to a
    \l Waypoint.

    This property, however, always contains a list of coordinates.

    \sa waypointObjects, addWaypoint, removeWaypoint, clearWaypoints
*/

QVariantList QDeclarativeGeoRouteQuery::waypoints()
{
    QVariantList res;

    for (const auto &w : m_waypoints)
        res << QVariant::fromValue(w->coordinate());

    return res;
}

/*!
    \qmlmethod list<Waypoint> QtLocation::RouteQuery::waypointObjects()

    This method can be used to retrieve the list of Waypoint objects
    relative to RouteQuery::waypoints.

    \sa waypointObjects, addWaypoint, removeWaypoint, clearWaypoints
*/
QVariantList QDeclarativeGeoRouteQuery::waypointObjects()
{
    QVariantList res;

    for (const auto &w : m_waypoints)
        res << QVariant::fromValue(w);

    return res;
}

void QDeclarativeGeoRouteQuery::setWaypoints(const QVariantList &value)
{
    QList<QDeclarativeGeoWaypoint *> waypointList;
    bool allWaypoints = true;

    for (const auto &w: value) {
        // First, test if this is already a QDeclarativeGeoWaypoint
        // From QVariant to QObject *
        QDeclarativeGeoWaypoint *waypoint = nullptr;
        QObject *obj = qvariant_cast<QObject *>(w);
        waypoint = qobject_cast<QDeclarativeGeoWaypoint *>(obj);

        if (waypoint) {
            waypointList << waypoint;
            continue;
        }

        // if here, w is not a Waypoint, so either a QGeoCoordinate or a variant map, so a waypoint has to be instantiated.
        allWaypoints = false;

        QGeoCoordinate c = parseCoordinate(w);
        if (!c.isValid()) {
            qmlWarning(this) << QStringLiteral("Invalid waypoint");
            flushWaypoints(waypointList);
            return;
        }

        waypoint = new QDeclarativeGeoWaypoint(this);
        waypoint->setCoordinate(c);
        waypointList << waypoint;

    }

    if (allWaypoints && m_waypoints == waypointList)
        return;

    flushWaypoints(m_waypoints);
    m_waypoints = waypointList;
    for (const QDeclarativeGeoWaypoint *w: qAsConst(m_waypoints))
        connect(w, &QDeclarativeGeoWaypoint::waypointDetailsChanged, this, &QDeclarativeGeoRouteQuery::waypointChanged);

    waypointChanged();
}

/*!
    \qmlproperty list<georectangle> RouteQuery::excludedAreas

    Areas that the route must not cross.

    Excluded areas can be set as part of the \l RouteQuery type declaration or
    dynamically with the functions provided.

    \sa addExcludedArea, removeExcludedArea, clearExcludedAreas
*/
QJSValue QDeclarativeGeoRouteQuery::excludedAreas() const
{
    QQmlContext *context = QQmlEngine::contextForObject(parent());
    QQmlEngine *engine = context->engine();
    QV4::ExecutionEngine *v4 = QQmlEnginePrivate::getV4Engine(engine);

    QV4::Scope scope(v4);
    QV4::Scoped<QV4::ArrayObject> excludedAreasArray(scope, v4->newArrayObject(request_.excludeAreas().length()));
    for (int i = 0; i < request_.excludeAreas().length(); ++i) {
        const QGeoRectangle &r = request_.excludeAreas().at(i);

        QV4::ScopedValue cv(scope, v4->fromVariant(QVariant::fromValue(r)));
        excludedAreasArray->put(i, cv);
    }

    return QJSValuePrivate::fromReturnedValue(excludedAreasArray.asReturnedValue());
}

void QDeclarativeGeoRouteQuery::setExcludedAreas(const QJSValue &value)
{
    if (!value.isArray())
        return;

    QList<QGeoRectangle> excludedAreasList;
    quint32 length = value.property(QStringLiteral("length")).toUInt();
    for (quint32 i = 0; i < length; ++i) {
        bool ok;
        QGeoRectangle r = parseRectangle(value.property(i), &ok);

        if (!ok || !r.isValid()) {
            qmlWarning(this) << QStringLiteral("Unsupported area type");
            return;
        }

        excludedAreasList.append(r);
    }

    if (request_.excludeAreas() == excludedAreasList)
        return;

    request_.setExcludeAreas(excludedAreasList);

    if (complete_) {
        emit excludedAreasChanged();
        emit queryDetailsChanged();
    }
}

/*!
    \qmlmethod void QtLocation::RouteQuery::addExcludedArea(georectangle area)

    Adds the specified georectangle \a area to the excluded areas
    (areas that the route must not cross).
    The same area can only be added once.

    \sa removeExcludedArea, clearExcludedAreas
*/


void QDeclarativeGeoRouteQuery::addExcludedArea(const QGeoRectangle &area)
{
    if (!area.isValid())
        return;

    QList<QGeoRectangle> excludedAreas = request_.excludeAreas();

    if (excludedAreas.contains(area))
        return;

    excludedAreas.append(area);

    request_.setExcludeAreas(excludedAreas);

    if (complete_) {
        emit excludedAreasChanged();
        emit queryDetailsChanged();
    }
}

/*!
    \qmlmethod void QtLocation::RouteQuery::removeExcludedArea(georectangle area)

    Removes the given \a area from excluded areas (areas that the route must not cross).

    \sa addExcludedArea, clearExcludedAreas
*/

void QDeclarativeGeoRouteQuery::removeExcludedArea(const QGeoRectangle &area)
{
    if (!area.isValid())
        return;

    QList<QGeoRectangle> excludedAreas = request_.excludeAreas();

    int index = excludedAreas.lastIndexOf(area);
    if (index == -1) {
        qmlWarning(this) << QStringLiteral("Cannot remove nonexistent area.");
        return;
    }
    excludedAreas.removeAt(index);
    request_.setExcludeAreas(excludedAreas);

    if (complete_) {
        emit excludedAreasChanged();
        emit queryDetailsChanged();
    }
}

/*!
    \qmlmethod void QtLocation::RouteQuery::clearExcludedAreas()

    Clears all excluded areas (areas that the route must not cross).

    \sa addExcludedArea, removeExcludedArea
*/

void QDeclarativeGeoRouteQuery::clearExcludedAreas()
{
    if (request_.excludeAreas().isEmpty())
        return;

    request_.setExcludeAreas(QList<QGeoRectangle>());

    if (complete_) {
        emit excludedAreasChanged();
        emit queryDetailsChanged();
    }
}

/*!
    \qmlmethod void QtLocation::RouteQuery::addWaypoint(coordinate)

    Appends a coordinate to the list of waypoints. Same coordinate
    can be set multiple times.
    The \a coordinate argument can be a \l coordinate or a \l Waypoint.
    If a \l coordinate is used, it will be internally converted to a
    \l Waypoint.

    \sa removeWaypoint, clearWaypoints
*/
void QDeclarativeGeoRouteQuery::addWaypoint(const QVariant &waypoint)
{
    QDeclarativeGeoWaypoint *w = nullptr;
    QObject *obj = qvariant_cast<QObject *>(waypoint);
    w = qobject_cast<QDeclarativeGeoWaypoint *>(obj);

    if (w) {
        if (! w->isValid()) {
            qmlWarning(this) << QStringLiteral("Invalid waypoint");
            return;
        }

        m_waypoints << w;
        connect(w, &QDeclarativeGeoWaypoint::waypointDetailsChanged, this, &QDeclarativeGeoRouteQuery::waypointChanged);
        waypointChanged();
        return;
    }

    // if here, waypoint is not a Waypoint, so either a QGeoCoordinate or a variant map, so a waypoint has to be instantiated.

    QGeoCoordinate c = parseCoordinate(waypoint);
    if (!c.isValid()) {
        qmlWarning(this) << QStringLiteral("Invalid coordinate as waypoint");
        return;
    }

    w = new QDeclarativeGeoWaypoint(this);
    w->setCoordinate(c);
    m_waypoints << w;
    connect(w, &QDeclarativeGeoWaypoint::waypointDetailsChanged, this, &QDeclarativeGeoRouteQuery::waypointChanged);
    waypointChanged();
}

/*!
    \qmlmethod void QtLocation::RouteQuery::removeWaypoint(coordinate)

    Removes the given \a coordinate from the list of waypoints. If the
    same coordinate appears multiple times, the most recently added
    coordinate instance is removed.

    \sa addWaypoint, clearWaypoints
*/
void QDeclarativeGeoRouteQuery::removeWaypoint(const QVariant &waypoint)
{
    QDeclarativeGeoWaypoint *w = nullptr;
    QObject *obj = qvariant_cast<QObject *>(waypoint);
    w = qobject_cast<QDeclarativeGeoWaypoint *>(obj);

    if (w) {
        if (!w->isValid()) {
            qmlWarning(this) << QStringLiteral("Invalid waypoint");
            return;
        }

        int idx = findWaypoint(m_waypoints, w);
        if (idx >= 0) {
            QDeclarativeGeoWaypoint *toRemove = m_waypoints.takeAt(idx);
            toRemove->disconnect(this);
            if (toRemove->parent() == this)
                delete toRemove;

            waypointChanged();
        } else {
            qmlWarning(this) << QStringLiteral("Cannot remove nonexistent waypoint.");
        }
        return;
    }

    QGeoCoordinate c = parseCoordinate(waypoint);
    if (!c.isValid()) {
        qmlWarning(this) << QStringLiteral("Invalid coordinate as waypoint");
        return;
    }

    int idx = findWaypoint(m_waypoints, c);
    if (idx >= 0) {
        QDeclarativeGeoWaypoint *toRemove = m_waypoints.takeAt(idx);
        toRemove->disconnect(this);
        if (toRemove->parent() == this)
            delete toRemove;

        waypointChanged();
    } else {
        qmlWarning(this) << QStringLiteral("Cannot remove nonexistent waypoint.");
    }
}

/*!
    \qmlmethod void QtLocation::RouteQuery::clearWaypoints()

    Clears all waypoints.

    \sa removeWaypoint, addWaypoint
*/
void QDeclarativeGeoRouteQuery::clearWaypoints()
{
    if (m_waypoints.isEmpty())
        return;

    flushWaypoints(m_waypoints);
    waypointChanged();
}

void QDeclarativeGeoRouteQuery::flushWaypoints(QList<QDeclarativeGeoWaypoint *> &waypoints)
{
    for (const QDeclarativeGeoWaypoint *w : qAsConst(waypoints)) {
        w->disconnect(this);
        if (w->parent() == this) // w has been created internally as a result of adding a QGeoCoordinate
            delete w;
    }
    waypoints.clear();
}

/*!
    \qmlmethod void QtLocation::RouteQuery::setFeatureWeight(FeatureType feature, FeatureWeight weight)

    Defines the \a weight  to associate with a \a feature during the planning
    of a route.

    Following lists the possible feature weights:

    \value RouteQuery.NeutralFeatureWeight
    The presence or absence of the feature does not affect the planning of the
    route

    \value RouteQuery.PreferFeatureWeight
    Routes which contain the feature are preferred over those that do not

    \value RouteQuery.RequireFeatureWeight
    Only routes which contain the feature are considered, otherwise no
    route will be returned

    \value RouteQuery.AvoidFeatureWeight
    Routes which do not contain the feature are preferred over those that
    do

    \value RouteQuery.DisallowFeatureWeight
    Only routes which do not contain the feature are considered, otherwise
    no route will be returned

    \sa featureTypes, resetFeatureWeights, featureWeight

*/

void QDeclarativeGeoRouteQuery::setFeatureWeight(FeatureType featureType, FeatureWeight featureWeight)
{
    if (featureType == NoFeature && !request_.featureTypes().isEmpty()) {
        resetFeatureWeights();
        return;
    }

    // Check if the weight changes, as we need to signal it
    FeatureWeight originalWeight = static_cast<FeatureWeight>(request_.featureWeight(static_cast<QGeoRouteRequest::FeatureType>(featureType)));
    if (featureWeight == originalWeight)
        return;

    request_.setFeatureWeight(static_cast<QGeoRouteRequest::FeatureType>(featureType),
                              static_cast<QGeoRouteRequest::FeatureWeight>(featureWeight));
    if (complete_ && ((originalWeight == NeutralFeatureWeight) || (featureWeight == NeutralFeatureWeight))) {
        // featureTypes should now give a different list, because the original and new weight
        // were not same, and other one was neutral weight
        emit featureTypesChanged();
        emit queryDetailsChanged();
    }
}

/*!
    \qmlmethod void QtLocation::RouteQuery::resetFeatureWeights()

    Resets all feature weights to their default state (NeutralFeatureWeight).

    \sa featureTypes, setFeatureWeight, featureWeight
*/
void QDeclarativeGeoRouteQuery::resetFeatureWeights()
{
    // reset all feature types.
    QList<QGeoRouteRequest::FeatureType> featureTypes = request_.featureTypes();
    for (int i = 0; i < featureTypes.count(); ++i) {
        request_.setFeatureWeight(featureTypes.at(i), QGeoRouteRequest::NeutralFeatureWeight);
    }
    if (complete_) {
        emit featureTypesChanged();
        emit queryDetailsChanged();
    }
}

/*!
    \qmlmethod FeatureWeight QtLocation::RouteQuery::featureWeight(FeatureType featureType)

    Gets the weight for the \a featureType.

    \sa featureTypes, setFeatureWeight, resetFeatureWeights
*/

int QDeclarativeGeoRouteQuery::featureWeight(FeatureType featureType)
{
    return request_.featureWeight(static_cast<QGeoRouteRequest::FeatureType>(featureType));
}

/*!
    \internal
*/
void QDeclarativeGeoRouteQuery::setTravelModes(QDeclarativeGeoRouteQuery::TravelModes travelModes)
{
    QGeoRouteRequest::TravelModes reqTravelModes;

    if (travelModes & QDeclarativeGeoRouteQuery::CarTravel)
        reqTravelModes |= QGeoRouteRequest::CarTravel;
    if (travelModes & QDeclarativeGeoRouteQuery::PedestrianTravel)
        reqTravelModes |= QGeoRouteRequest::PedestrianTravel;
    if (travelModes & QDeclarativeGeoRouteQuery::BicycleTravel)
        reqTravelModes |= QGeoRouteRequest::BicycleTravel;
    if (travelModes & QDeclarativeGeoRouteQuery::PublicTransitTravel)
        reqTravelModes |= QGeoRouteRequest::PublicTransitTravel;
    if (travelModes & QDeclarativeGeoRouteQuery::TruckTravel)
        reqTravelModes |= QGeoRouteRequest::TruckTravel;

    if (reqTravelModes == request_.travelModes())
        return;

    request_.setTravelModes(reqTravelModes);

    if (complete_) {
        emit travelModesChanged();
        emit queryDetailsChanged();
    }
}


/*!
    \qmlproperty enumeration RouteQuery::segmentDetail

    The level of detail which will be used in the representation of routing segments.

    \value RouteQuery.NoSegmentData
    No segment data should be included with the route

    \value RouteQuery.BasicSegmentData
    Basic segment data will be included with the route

    The default value is \c {RouteQuery.BasicSegmentData}.
*/

void QDeclarativeGeoRouteQuery::setSegmentDetail(SegmentDetail segmentDetail)
{
    if (static_cast<QGeoRouteRequest::SegmentDetail>(segmentDetail) == request_.segmentDetail())
        return;
    request_.setSegmentDetail(static_cast<QGeoRouteRequest::SegmentDetail>(segmentDetail));
    if (complete_) {
        emit segmentDetailChanged();
        emit queryDetailsChanged();
    }
}

QDeclarativeGeoRouteQuery::SegmentDetail QDeclarativeGeoRouteQuery::segmentDetail() const
{
    return static_cast<QDeclarativeGeoRouteQuery::SegmentDetail>(request_.segmentDetail());
}

/*!
    \qmlproperty enumeration RouteQuery::maneuverDetail

    The level of detail which will be used in the representation of routing maneuvers.

    \value RouteQuery.NoManeuvers
    No maneuvers should be included with the route

    \value RouteQuery.BasicManeuvers
    Basic maneuvers will be included with the route

    The default value is \c {RouteQuery.BasicManeuvers}.
*/

void QDeclarativeGeoRouteQuery::setManeuverDetail(ManeuverDetail maneuverDetail)
{
    if (static_cast<QGeoRouteRequest::ManeuverDetail>(maneuverDetail) == request_.maneuverDetail())
        return;
    request_.setManeuverDetail(static_cast<QGeoRouteRequest::ManeuverDetail>(maneuverDetail));
    if (complete_) {
        emit maneuverDetailChanged();
        emit queryDetailsChanged();
    }
}

QDeclarativeGeoRouteQuery::ManeuverDetail QDeclarativeGeoRouteQuery::maneuverDetail() const
{
    return static_cast<QDeclarativeGeoRouteQuery::ManeuverDetail>(request_.maneuverDetail());
}

/*!
    \qmlproperty enumeration RouteQuery::travelModes

    The travel modes which should be considered during the planning of the route.
    Values can be combined with OR ('|') -operator.

    \value RouteQuery.CarTravel
    The route will be optimized for someone who is driving a car

    \value RouteQuery.PedestrianTravel
    The route will be optimized for someone who is walking

    \value RouteQuery.BicycleTravel
    The route will be optimized for someone who is riding a bicycle

    \value RouteQuery.PublicTransit
    Travel The route will be optimized for someone who is making use of public transit

    \value RouteQuery.TruckTravel
    The route will be optimized for someone who is driving a truck

    The default value is \c {RouteQuery.CarTravel}.
*/

QDeclarativeGeoRouteQuery::TravelModes QDeclarativeGeoRouteQuery::travelModes() const
{
    QGeoRouteRequest::TravelModes reqTravelModes = request_.travelModes();
    QDeclarativeGeoRouteQuery::TravelModes travelModes;

    if (reqTravelModes & QGeoRouteRequest::CarTravel)
        travelModes |= QDeclarativeGeoRouteQuery::CarTravel;
    if (reqTravelModes & QGeoRouteRequest::PedestrianTravel)
        travelModes |= QDeclarativeGeoRouteQuery::PedestrianTravel;
    if (reqTravelModes & QGeoRouteRequest::BicycleTravel)
        travelModes |= QDeclarativeGeoRouteQuery::BicycleTravel;
    if (reqTravelModes & QGeoRouteRequest::PublicTransitTravel)
        travelModes |= QDeclarativeGeoRouteQuery::PublicTransitTravel;
    if (reqTravelModes & QGeoRouteRequest::TruckTravel)
        travelModes |= QDeclarativeGeoRouteQuery::TruckTravel;

    return travelModes;
}

/*!
    \qmlproperty enumeration RouteQuery::routeOptimizations

    The route optimizations which should be considered during the planning of the route.
    Values can be combined with OR ('|') -operator.


    \value RouteQuery.ShortestRoute
    Minimize the length of the journey

    \value RouteQuery.FastestRoute
    Minimize the traveling time for the journey

    \value RouteQuery.MostEconomicRoute
    Minimize the cost of the journey

    \value RouteQuery.MostScenicRoute
    Maximize the scenic potential of the journey

    The default value is \c {RouteQuery.FastestRoute}.
*/

QDeclarativeGeoRouteQuery::RouteOptimizations QDeclarativeGeoRouteQuery::routeOptimizations() const
{
    QGeoRouteRequest::RouteOptimizations reqOptimizations = request_.routeOptimization();
    QDeclarativeGeoRouteQuery::RouteOptimizations optimization;

    if (reqOptimizations & QGeoRouteRequest::ShortestRoute)
        optimization |= QDeclarativeGeoRouteQuery::ShortestRoute;
    if (reqOptimizations & QGeoRouteRequest::FastestRoute)
        optimization |= QDeclarativeGeoRouteQuery::FastestRoute;
    if (reqOptimizations & QGeoRouteRequest::MostEconomicRoute)
        optimization |= QDeclarativeGeoRouteQuery::MostEconomicRoute;
    if (reqOptimizations & QGeoRouteRequest::MostScenicRoute)
        optimization |= QDeclarativeGeoRouteQuery::MostScenicRoute;

    return optimization;
}

/*!
    \qmlproperty date RouteQuery::departureTime

    The departure time to be used when querying for the route.
    The default value is an invalid date, meaning no departure time will be used in the query.

    \since 5.13
*/
void QDeclarativeGeoRouteQuery::setDepartureTime(const QDateTime &departureTime)
{
    if (departureTime == request_.departureTime())
        return;

    request_.setDepartureTime(departureTime);
    if (complete_) {
        emit departureTimeChanged();
        emit queryDetailsChanged();
    }
}

QDateTime QDeclarativeGeoRouteQuery::departureTime() const
{
    return request_.departureTime();
}

void QDeclarativeGeoRouteQuery::setRouteOptimizations(QDeclarativeGeoRouteQuery::RouteOptimizations optimization)
{
    QGeoRouteRequest::RouteOptimizations reqOptimizations;

    if (optimization & QDeclarativeGeoRouteQuery::ShortestRoute)
        reqOptimizations |= QGeoRouteRequest::ShortestRoute;
    if (optimization & QDeclarativeGeoRouteQuery::FastestRoute)
        reqOptimizations |= QGeoRouteRequest::FastestRoute;
    if (optimization & QDeclarativeGeoRouteQuery::MostEconomicRoute)
        reqOptimizations |= QGeoRouteRequest::MostEconomicRoute;
    if (optimization & QDeclarativeGeoRouteQuery::MostScenicRoute)
        reqOptimizations |= QGeoRouteRequest::MostScenicRoute;

    if (reqOptimizations == request_.routeOptimization())
        return;

    request_.setRouteOptimization(reqOptimizations);

    if (complete_) {
        emit routeOptimizationsChanged();
        emit queryDetailsChanged();
    }
}

/*!
    \internal
*/
QGeoRouteRequest QDeclarativeGeoRouteQuery::routeRequest()
{
    if (m_extraParametersChanged) {
        m_extraParametersChanged = false;
        // Update extra params into request
        const QList<QDeclarativeGeoMapParameter *> params = quickChildren<QDeclarativeGeoMapParameter>();
        QVariantMap extraParameters;
        for (const QDeclarativeGeoMapParameter *p: params)
            extraParameters[p->type()] = p->toVariantMap();
        request_.setExtraParameters(extraParameters);
    }
    if (m_waypointsChanged) {
        m_waypointsChanged = false;
        // Update waypoints and metadata into request
        request_.setWaypoints(waypointCoordinates(m_waypoints));
        request_.setWaypointsMetadata(waypointMetadata(m_waypoints));
    }
    return request_;
}


/*!
    \qmlproperty VariantMap RouteQuery::extraParameters
    \readonly

    The route query extra parameters. This property is read only. If the query is
    defined by the user, these can be set by using MapParameters.
    If the route query comes from the engine via signals, the query is intended to be read-only.

    \since 5.11
*/
QVariantMap QDeclarativeGeoRouteQuery::extraParameters()
{
    return routeRequest().extraParameters();
}

void QDeclarativeGeoRouteQuery::excludedAreaCoordinateChanged()
{
    if (!m_excludedAreaCoordinateChanged) {
        m_excludedAreaCoordinateChanged = true;
        QMetaObject::invokeMethod(this, "doCoordinateChanged", Qt::QueuedConnection);
    }
}

void QDeclarativeGeoRouteQuery::extraParameterChanged()
{
    m_extraParametersChanged = true;
    if (complete_) {
        emit extraParametersChanged();
        emit queryDetailsChanged();
    }
}

void QDeclarativeGeoRouteQuery::waypointChanged()
{
    m_waypointsChanged = true;
    if (complete_) {
        emit waypointsChanged();
        emit queryDetailsChanged();
    }
}

void QDeclarativeGeoRouteQuery::append(QQmlListProperty<QObject> *p, QObject *v)
{
    QDeclarativeGeoRouteQuery *query = static_cast<QDeclarativeGeoRouteQuery*>(p->object);
    query->m_children.append(v);

    QDeclarativeGeoMapParameter *param = qobject_cast<QDeclarativeGeoMapParameter *>(v);
    if (param) {
        query->m_extraParametersChanged = true;
        query->connect(param, &QGeoMapParameter::propertyUpdated,
                       query, &QDeclarativeGeoRouteQuery::extraParameterChanged);
        if (query->complete_) {
            emit query->extraParametersChanged();
            emit query->queryDetailsChanged();
        }
    }
}

int QDeclarativeGeoRouteQuery::count(QQmlListProperty<QObject> *p)
{
    return static_cast<QDeclarativeGeoRouteQuery*>(p->object)->m_children.count();
}

QObject *QDeclarativeGeoRouteQuery::at(QQmlListProperty<QObject> *p, int idx)
{
    return static_cast<QDeclarativeGeoRouteQuery*>(p->object)->m_children.at(idx);
}

void QDeclarativeGeoRouteQuery::clear(QQmlListProperty<QObject> *p)
{
    QDeclarativeGeoRouteQuery *query = static_cast<QDeclarativeGeoRouteQuery*>(p->object);
    for (auto kid : qAsConst(query->m_children)) {
        auto val = qobject_cast<QDeclarativeGeoMapParameter *>(kid);
        if (val) {
            val->disconnect(val, nullptr, query, nullptr);
            query->m_extraParametersChanged = true;
        }
    }
    query->m_children.clear();
    if (query->m_extraParametersChanged && query->complete_) {
        emit query->extraParametersChanged();
        emit query->queryDetailsChanged();
    }
}

QQmlListProperty<QObject> QDeclarativeGeoRouteQuery::declarativeChildren()
{
    return QQmlListProperty<QObject>(this, nullptr,
                                           &QDeclarativeGeoRouteQuery::append,
                                           &QDeclarativeGeoRouteQuery::count,
                                           &QDeclarativeGeoRouteQuery::at,
                                           &QDeclarativeGeoRouteQuery::clear);
}

void QDeclarativeGeoRouteQuery::doCoordinateChanged()
{
    m_excludedAreaCoordinateChanged = false;
    if (complete_)
        emit queryDetailsChanged();
}

/*!
    \qmltype Waypoint
    \instantiates QDeclarativeGeoWaypoint
    \inqmlmodule QtLocation
    \ingroup qml-QtLocation5-routing
    \since QtLocation 5.11

    \brief The Waypoint type provides a mean to specify a waypoint in a \l RouteQuery
    in a more detailed way than by using a simple \l coordinate.

    A Waypoint is a type that allows to specify properties of a waypoint in a \l RouteQuery,
    such as the waypoint coordinate, or the angle of approach to the waypoint.

    Additional information that are backend-specific can be specified by nesting \l MapParameter
    elements.

    Changing properties of the waypoint or of its nested MapParameteters will cause the containing
    \l RouteQuery to emit the queryDetailsChanged signal.

    \section2 Example Usage

    \code
    Plugin {
        id: aPlugin
        name: "osm"
    }

    Waypoint {
        id: waypointStart
        coordinate: ...
        bearing: ...
    }
    Waypoint {
        id: waypointFinish
        coordinate: ...
        bearing: ...
    }

    RouteQuery {
        id: aQuery
        Component.onCompleted: {
            travelModes = RouteQuery.CarTravel
            addWaypoint(waypointStart)
            var aWaypoint = Qt.createQmlObject ('import QtLocation 5.11; Waypoint { ... }', ...)
            addWaypoint(aWaypoint)
            addWaypoint(waypointFinish)
        }
    }

    RouteModel {
        id: routeModel
        plugin: aPlugin
        query: aQuery
        autoUpdate: true
    }
    \endcode

    \sa RouteQuery
*/


/*
 *
    At the time of adding this class (2017.11), 3 routing services are natively supported in Qt: Esri, Here and OSRM.
    Waypoint documentation for each of these:
    Esri: http://resources.arcgis.com/en/help/arcgis-rest-api/index.html#//02r300000036000000 ,  called "stop"
    HERE: https://developer.here.com/documentation/routing/topics/resource-param-type-waypoint.html
    OSRM: https://github.com/Project-OSRM/osrm-backend/blob/master/docs/http.md , under Request Options
 *
 */


static QGeoCoordinate convertWaypointToCoordinate(const QDeclarativeGeoWaypoint *value)
{
    return value->coordinate();
}

struct WaypointVariantConversions
{
    WaypointVariantConversions()
    {
        QMetaType::registerConverter<QDeclarativeGeoWaypoint *, QGeoCoordinate>(convertWaypointToCoordinate);
    }
};

Q_GLOBAL_STATIC(WaypointVariantConversions, initWaypointConversions)


QDeclarativeGeoWaypoint::QDeclarativeGeoWaypoint(QObject *parent) : QGeoCoordinateObject(parent)
{
    initWaypointConversions();
    connect(this, &QGeoCoordinateObject::coordinateChanged,
            this, &QDeclarativeGeoWaypoint::waypointDetailsChanged);
}

QDeclarativeGeoWaypoint::~QDeclarativeGeoWaypoint()
{

}

bool QDeclarativeGeoWaypoint::operator==(const QDeclarativeGeoWaypoint &other) const
{
    const QList<QDeclarativeGeoMapParameter *> params = quickChildren<QDeclarativeGeoMapParameter>();
    const QList<QDeclarativeGeoMapParameter *> otherParams = other.quickChildren<QDeclarativeGeoMapParameter>();

    return coordinate() == other.coordinate() &&
           compareFloats(m_bearing, other.bearing()) &&
           compareParameterList(params, otherParams);
}

/*!
    \qmlproperty coordinate Waypoint::coordinate

    The waypoint's coordinate. The default value is undefined.
*/


/*!
    \qmlproperty real Waypoint::latitude

    The latitude of the waypoint's coordinate. The default value is NaN.
    Changing this property will affect the \l Waypoint::coordinate property as well.
*/
qreal QDeclarativeGeoWaypoint::latitude() const
{
    return m_coordinate.latitude();
}

void QDeclarativeGeoWaypoint::setLatitude(qreal latitude)
{
    if (compareFloats(latitude, m_coordinate.latitude()))
        return;

    m_coordinate.setLatitude(latitude);
    if (m_complete) {
        emit coordinateChanged();
        emit waypointDetailsChanged();
    }
}

/*!
    \qmlproperty real Waypoint::longitude

    The longitude of the waypoint's coordinate. The default value is NaN.
    Changing this property will affect the \l Waypoint::coordinate property as well.
*/
qreal QDeclarativeGeoWaypoint::longitude() const
{
    return m_coordinate.longitude();
}

void QDeclarativeGeoWaypoint::setLongitude(qreal longitude)
{
    if (compareFloats(longitude, m_coordinate.longitude()))
        return;

    m_coordinate.setLongitude(longitude);
    if (m_complete) {
        emit coordinateChanged();
        emit waypointDetailsChanged();
    }
}

/*!
    \qmlproperty real Waypoint::altitude

    The altitude of the waypoint's coordinate. The default value is NaN.
    Changing this property will affect the \l Waypoint::coordinate property as well.
*/
qreal QDeclarativeGeoWaypoint::altitude() const
{
    return m_coordinate.altitude();
}

void QDeclarativeGeoWaypoint::setAltitude(qreal altitude)
{
    if (compareFloats(altitude, m_coordinate.altitude()))
        return;

    m_coordinate.setAltitude(altitude);
    if (m_complete) {
        emit coordinateChanged();
        emit waypointDetailsChanged();
    }
}

bool QDeclarativeGeoWaypoint::isValid() const
{
    return m_coordinate.isValid();
}

/*!
    \qmlproperty real Waypoint::bearing

    The bearing specifying the angle of approach of the waypoint, that is the bearing with which the waypoint is to be approached.
    This information may be used by the provider to filter the road segment the waypoint will be placed on, and,
    depending on the provider and the \l {QGeoRouteRequest::TravelMode} {travel mode} used, to restrict the maneuvers
    allowed at the waypoint, potentially making the provider calculating and returning a different route.

    If set to NaN, this value will not be considered.

    The default value is NaN.
*/
qreal QDeclarativeGeoWaypoint::bearing() const
{
    return m_bearing;
}

void QDeclarativeGeoWaypoint::setBearing(qreal bearing)
{
    if (compareFloats(bearing, m_bearing))
        return;

    m_bearing = bearing;

    // Bearing is actually packed into QGeoRouteRequest::waypointMetadata() together with the extra parameters
    m_metadataChanged = true;
    if (m_complete) {
        emit bearingChanged();
        emit waypointDetailsChanged();
    }
}

/*!
    \qmlproperty VariantMap Waypoint::metadata
    \readonly

    The waypoint metadata. This property is read only. If the waypoint is
    defined by the user, these can be set by using MapParameters.
    If the waypoint comes from the engine via signals, or as part of a read-only route query,
    the waypoint is intended to be read-only.
*/
QVariantMap QDeclarativeGeoWaypoint::metadata()
{
    if (m_metadataChanged) {
        m_metadataChanged = false;
        m_metadata.clear();
        // Update metadata
        const QList<QDeclarativeGeoMapParameter *> params = quickChildren<QDeclarativeGeoMapParameter>();
        QVariantMap extraParameters;
        for (const QDeclarativeGeoMapParameter *p: params)
            extraParameters[p->type()] = p->toVariantMap();
        m_metadata[QStringLiteral("extra")] = extraParameters;
        m_metadata[QStringLiteral("bearing")] = m_bearing;
    }
    return m_metadata;
}

// Used only by QDeclarativeGeoRouteRequest
void QDeclarativeGeoWaypoint::setMetadata(const QVariantMap &meta)
{
    m_metadata = meta;
    if (m_metadata.contains(QStringLiteral("bearing")) && m_metadata.value(QStringLiteral("bearing")).canConvert<double>())
        m_bearing = m_metadata.value(QStringLiteral("bearing")).toDouble();
    m_metadataChanged = false;
}

void QDeclarativeGeoWaypoint::extraParameterChanged()
{
    m_metadataChanged = true;
    if (m_complete) {
        emit extraParametersChanged();
        emit waypointDetailsChanged();
    }
}

void QDeclarativeGeoWaypoint::append(QQmlListProperty<QObject> *p, QObject *v)
{
    QDeclarativeGeoWaypoint *waypoint = static_cast<QDeclarativeGeoWaypoint*>(p->object);
    waypoint->m_children.append(v);

    QDeclarativeGeoMapParameter *param = qobject_cast<QDeclarativeGeoMapParameter *>(v);
    if (param) {
        waypoint->connect(param, &QGeoMapParameter::propertyUpdated,
                       waypoint, &QDeclarativeGeoWaypoint::extraParameterChanged);
        waypoint->extraParameterChanged();
    }
}

int QDeclarativeGeoWaypoint::count(QQmlListProperty<QObject> *p)
{
    return static_cast<QDeclarativeGeoWaypoint*>(p->object)->m_children.count();
}

QObject *QDeclarativeGeoWaypoint::at(QQmlListProperty<QObject> *p, int idx)
{
    return static_cast<QDeclarativeGeoWaypoint*>(p->object)->m_children.at(idx);
}

void QDeclarativeGeoWaypoint::clear(QQmlListProperty<QObject> *p)
{
    QDeclarativeGeoWaypoint *waypoint = static_cast<QDeclarativeGeoWaypoint*>(p->object);
    for (auto kid : qAsConst(waypoint->m_children)) {
        auto val = qobject_cast<QDeclarativeGeoMapParameter *>(kid);
        if (val) {
            val->disconnect(waypoint);
            waypoint->m_metadataChanged = true;
        }
    }
    waypoint->m_children.clear();
    if (waypoint->m_metadataChanged && waypoint->m_complete) {
        emit waypoint->extraParametersChanged();
        emit waypoint->waypointDetailsChanged();
    }
}

QQmlListProperty<QObject> QDeclarativeGeoWaypoint::declarativeChildren()
{
    return QQmlListProperty<QObject>(this, nullptr,
                                     &QDeclarativeGeoWaypoint::append,
                                     &QDeclarativeGeoWaypoint::count,
                                     &QDeclarativeGeoWaypoint::at,
                                     &QDeclarativeGeoWaypoint::clear);
}

QT_END_NAMESPACE