Sessions / Queries ================== .. contents:: :local: :class: faq :backlinks: none I'm re-loading data with my Session but it isn't seeing changes that I committed elsewhere ------------------------------------------------------------------------------------------ The main issue regarding this behavior is that the session acts as though the transaction is in the *serializable* isolation state, even if it's not (and it usually is not). In practical terms, this means that the session does not alter any data that it's already read within the scope of a transaction. If the term "isolation level" is unfamiliar, then you first need to read this link: `Isolation Level `_ In short, serializable isolation level generally means that once you SELECT a series of rows in a transaction, you will get *the identical data* back each time you re-emit that SELECT. If you are in the next-lower isolation level, "repeatable read", you'll see newly added rows (and no longer see deleted rows), but for rows that you've *already* loaded, you won't see any change. Only if you are in a lower isolation level, e.g. "read committed", does it become possible to see a row of data change its value. For information on controlling the isolation level when using the SQLAlchemy ORM, see :ref:`session_transaction_isolation`. To simplify things dramatically, the :class:`.Session` itself works in terms of a completely isolated transaction, and doesn't overwrite any mapped attributes it's already read unless you tell it to. The use case of trying to re-read data you've already loaded in an ongoing transaction is an *uncommon* use case that in many cases has no effect, so this is considered to be the exception, not the norm; to work within this exception, several methods are provided to allow specific data to be reloaded within the context of an ongoing transaction. To understand what we mean by "the transaction" when we talk about the :class:`.Session`, your :class:`.Session` is intended to only work within a transaction. An overview of this is at :ref:`unitofwork_transaction`. Once we've figured out what our isolation level is, and we think that our isolation level is set at a low enough level so that if we re-SELECT a row, we should see new data in our :class:`.Session`, how do we see it? Three ways, from most common to least: 1. We simply end our transaction and start a new one on next access with our :class:`.Session` by calling :meth:`.Session.commit` (note that if the :class:`.Session` is in the lesser-used "autocommit" mode, there would be a call to :meth:`.Session.begin` as well). The vast majority of applications and use cases do not have any issues with not being able to "see" data in other transactions because they stick to this pattern, which is at the core of the best practice of **short lived transactions**. See :ref:`session_faq_whentocreate` for some thoughts on this. 2. We tell our :class:`.Session` to re-read rows that it has already read, either when we next query for them using :meth:`.Session.expire_all` or :meth:`.Session.expire`, or immediately on an object using :class:`.Session.refresh`. See :ref:`session_expire` for detail on this. 3. We can run whole queries while setting them to definitely overwrite already-loaded objects as they read rows by using :meth:`.Query.populate_existing`. But remember, **the ORM cannot see changes in rows if our isolation level is repeatable read or higher, unless we start a new transaction**. "This Session's transaction has been rolled back due to a previous exception during flush." (or similar) --------------------------------------------------------------------------------------------------------- This is an error that occurs when a :meth:`.Session.flush` raises an exception, rolls back the transaction, but further commands upon the `Session` are called without an explicit call to :meth:`.Session.rollback` or :meth:`.Session.close`. It usually corresponds to an application that catches an exception upon :meth:`.Session.flush` or :meth:`.Session.commit` and does not properly handle the exception. For example:: from sqlalchemy import create_engine, Column, Integer from sqlalchemy.orm import sessionmaker from sqlalchemy.ext.declarative import declarative_base Base = declarative_base(create_engine('sqlite://')) class Foo(Base): __tablename__ = 'foo' id = Column(Integer, primary_key=True) Base.metadata.create_all() session = sessionmaker()() # constraint violation session.add_all([Foo(id=1), Foo(id=1)]) try: session.commit() except: # ignore error pass # continue using session without rolling back session.commit() The usage of the :class:`.Session` should fit within a structure similar to this:: try: session.commit() except: session.rollback() raise finally: session.close() # optional, depends on use case Many things can cause a failure within the try/except besides flushes. You should always have some kind of "framing" of your session operations so that connection and transaction resources have a definitive boundary, otherwise your application doesn't really have its usage of resources under control. This is not to say that you need to put try/except blocks all throughout your application - on the contrary, this would be a terrible idea. You should architect your application such that there is one (or few) point(s) of "framing" around session operations. For a detailed discussion on how to organize usage of the :class:`.Session`, please see :ref:`session_faq_whentocreate`. But why does flush() insist on issuing a ROLLBACK? ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ It would be great if :meth:`.Session.flush` could partially complete and then not roll back, however this is beyond its current capabilities since its internal bookkeeping would have to be modified such that it can be halted at any time and be exactly consistent with what's been flushed to the database. While this is theoretically possible, the usefulness of the enhancement is greatly decreased by the fact that many database operations require a ROLLBACK in any case. Postgres in particular has operations which, once failed, the transaction is not allowed to continue:: test=> create table foo(id integer primary key); NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "foo_pkey" for table "foo" CREATE TABLE test=> begin; BEGIN test=> insert into foo values(1); INSERT 0 1 test=> commit; COMMIT test=> begin; BEGIN test=> insert into foo values(1); ERROR: duplicate key value violates unique constraint "foo_pkey" test=> insert into foo values(2); ERROR: current transaction is aborted, commands ignored until end of transaction block What SQLAlchemy offers that solves both issues is support of SAVEPOINT, via :meth:`.Session.begin_nested`. Using :meth:`.Session.begin_nested`, you can frame an operation that may potentially fail within a transaction, and then "roll back" to the point before its failure while maintaining the enclosing transaction. But why isn't the one automatic call to ROLLBACK enough? Why must I ROLLBACK again? ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This is again a matter of the :class:`.Session` providing a consistent interface and refusing to guess about what context its being used. For example, the :class:`.Session` supports "framing" above within multiple levels. Such as, suppose you had a decorator ``@with_session()``, which did this:: def with_session(fn): def go(*args, **kw): session.begin(subtransactions=True) try: ret = fn(*args, **kw) session.commit() return ret except: session.rollback() raise return go The above decorator begins a transaction if one does not exist already, and then commits it, if it were the creator. The "subtransactions" flag means that if :meth:`.Session.begin` were already called by an enclosing function, nothing happens except a counter is incremented - this counter is decremented when :meth:`.Session.commit` is called and only when it goes back to zero does the actual COMMIT happen. It allows this usage pattern:: @with_session def one(): # do stuff two() @with_session def two(): # etc. one() two() ``one()`` can call ``two()``, or ``two()`` can be called by itself, and the ``@with_session`` decorator ensures the appropriate "framing" - the transaction boundaries stay on the outermost call level. As you can see, if ``two()`` calls ``flush()`` which throws an exception and then issues a ``rollback()``, there will *always* be a second ``rollback()`` performed by the decorator, and possibly a third corresponding to two levels of decorator. If the ``flush()`` pushed the ``rollback()`` all the way out to the top of the stack, and then we said that all remaining ``rollback()`` calls are moot, there is some silent behavior going on there. A poorly written enclosing method might suppress the exception, and then call ``commit()`` assuming nothing is wrong, and then you have a silent failure condition. The main reason people get this error in fact is because they didn't write clean "framing" code and they would have had other problems down the road. If you think the above use case is a little exotic, the same kind of thing comes into play if you want to SAVEPOINT- you might call ``begin_nested()`` several times, and the ``commit()``/``rollback()`` calls each resolve the most recent ``begin_nested()``. The meaning of ``rollback()`` or ``commit()`` is dependent upon which enclosing block it is called, and you might have any sequence of ``rollback()``/``commit()`` in any order, and its the level of nesting that determines their behavior. In both of the above cases, if ``flush()`` broke the nesting of transaction blocks, the behavior is, depending on scenario, anywhere from "magic" to silent failure to blatant interruption of code flow. ``flush()`` makes its own "subtransaction", so that a transaction is started up regardless of the external transactional state, and when complete it calls ``commit()``, or ``rollback()`` upon failure - but that ``rollback()`` corresponds to its own subtransaction - it doesn't want to guess how you'd like to handle the external "framing" of the transaction, which could be nested many levels with any combination of subtransactions and real SAVEPOINTs. The job of starting/ending the "frame" is kept consistently with the code external to the ``flush()``, and we made a decision that this was the most consistent approach. How do I make a Query that always adds a certain filter to every query? ------------------------------------------------------------------------------------------------ See the recipe at `PreFilteredQuery `_. I've created a mapping against an Outer Join, and while the query returns rows, no objects are returned. Why not? ------------------------------------------------------------------------------------------------------------------ Rows returned by an outer join may contain NULL for part of the primary key, as the primary key is the composite of both tables. The :class:`.Query` object ignores incoming rows that don't have an acceptable primary key. Based on the setting of the ``allow_partial_pks`` flag on :func:`.mapper`, a primary key is accepted if the value has at least one non-NULL value, or alternatively if the value has no NULL values. See ``allow_partial_pks`` at :func:`.mapper`. I'm using ``joinedload()`` or ``lazy=False`` to create a JOIN/OUTER JOIN and SQLAlchemy is not constructing the correct query when I try to add a WHERE, ORDER BY, LIMIT, etc. (which relies upon the (OUTER) JOIN) ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The joins generated by joined eager loading are only used to fully load related collections, and are designed to have no impact on the primary results of the query. Since they are anonymously aliased, they cannot be referenced directly. For detail on this beahvior, see :ref:`zen_of_eager_loading`. Query has no ``__len__()``, why not? ------------------------------------ The Python ``__len__()`` magic method applied to an object allows the ``len()`` builtin to be used to determine the length of the collection. It's intuitive that a SQL query object would link ``__len__()`` to the :meth:`.Query.count` method, which emits a `SELECT COUNT`. The reason this is not possible is because evaluating the query as a list would incur two SQL calls instead of one:: class Iterates(object): def __len__(self): print("LEN!") return 5 def __iter__(self): print("ITER!") return iter([1, 2, 3, 4, 5]) list(Iterates()) output:: ITER! LEN! How Do I use Textual SQL with ORM Queries? ------------------------------------------ See: * :ref:`orm_tutorial_literal_sql` - Ad-hoc textual blocks with :class:`.Query` * :ref:`session_sql_expressions` - Using :class:`.Session` with textual SQL directly. I'm calling ``Session.delete(myobject)`` and it isn't removed from the parent collection! ------------------------------------------------------------------------------------------ See :ref:`session_deleting_from_collections` for a description of this behavior. why isn't my ``__init__()`` called when I load objects? ------------------------------------------------------- See :ref:`mapping_constructors` for a description of this behavior. how do I use ON DELETE CASCADE with SA's ORM? --------------------------------------------- SQLAlchemy will always issue UPDATE or DELETE statements for dependent rows which are currently loaded in the :class:`.Session`. For rows which are not loaded, it will by default issue SELECT statements to load those rows and update/delete those as well; in other words it assumes there is no ON DELETE CASCADE configured. To configure SQLAlchemy to cooperate with ON DELETE CASCADE, see :ref:`passive_deletes`. I set the "foo_id" attribute on my instance to "7", but the "foo" attribute is still ``None`` - shouldn't it have loaded Foo with id #7? ---------------------------------------------------------------------------------------------------------------------------------------------------- The ORM is not constructed in such a way as to support immediate population of relationships driven from foreign key attribute changes - instead, it is designed to work the other way around - foreign key attributes are handled by the ORM behind the scenes, the end user sets up object relationships naturally. Therefore, the recommended way to set ``o.foo`` is to do just that - set it!:: foo = Session.query(Foo).get(7) o.foo = foo Session.commit() Manipulation of foreign key attributes is of course entirely legal. However, setting a foreign-key attribute to a new value currently does not trigger an "expire" event of the :func:`.relationship` in which it's involved. This means that for the following sequence:: o = Session.query(SomeClass).first() assert o.foo is None # accessing an un-set attribute sets it to None o.foo_id = 7 ``o.foo`` is initialized to ``None`` when we first accessed it. Setting ``o.foo_id = 7`` will have the value of "7" as pending, but no flush has occurred - so ``o.foo`` is still ``None``:: # attribute is already set to None, has not been # reconciled with o.foo_id = 7 yet assert o.foo is None For ``o.foo`` to load based on the foreign key mutation is usually achieved naturally after the commit, which both flushes the new foreign key value and expires all state:: Session.commit() # expires all attributes foo_7 = Session.query(Foo).get(7) assert o.foo is foo_7 # o.foo lazyloads on access A more minimal operation is to expire the attribute individually - this can be performed for any :term:`persistent` object using :meth:`.Session.expire`:: o = Session.query(SomeClass).first() o.foo_id = 7 Session.expire(o, ['foo']) # object must be persistent for this foo_7 = Session.query(Foo).get(7) assert o.foo is foo_7 # o.foo lazyloads on access Note that if the object is not persistent but present in the :class:`.Session`, it's known as :term:`pending`. This means the row for the object has not been INSERTed into the database yet. For such an object, setting ``foo_id`` does not have meaning until the row is inserted; otherwise there is no row yet:: new_obj = SomeClass() new_obj.foo_id = 7 Session.add(new_obj) # accessing an un-set attribute sets it to None assert new_obj.foo is None Session.flush() # emits INSERT # expire this because we already set .foo to None Session.expire(o, ['foo']) assert new_obj.foo is foo_7 # now it loads .. topic:: Attribute loading for non-persistent objects One variant on the "pending" behavior above is if we use the flag ``load_on_pending`` on :func:`.relationship`. When this flag is set, the lazy loader will emit for ``new_obj.foo`` before the INSERT proceeds; another variant of this is to use the :meth:`.Session.enable_relationship_loading` method, which can "attach" an object to a :class:`.Session` in such a way that many-to-one relationships load as according to foreign key attributes regardless of the object being in any particular state. Both techniques are **not recommended for general use**; they were added to suit specific programming scenarios encountered by users which involve the repurposing of the ORM's usual object states. The recipe `ExpireRelationshipOnFKChange `_ features an example using SQLAlchemy events in order to coordinate the setting of foreign key attributes with many-to-one relationships. .. _faq_walk_objects: How do I walk all objects that are related to a given object? ------------------------------------------------------------- An object that has other objects related to it will correspond to the :func:`.relationship` constructs set up between mappers. This code fragment will iterate all the objects, correcting for cycles as well:: from sqlalchemy import inspect def walk(obj): deque = [obj] seen = set() while deque: obj = deque.pop(0) if obj in seen: continue else: seen.add(obj) yield obj insp = inspect(obj) for relationship in insp.mapper.relationships: related = getattr(obj, relationship.key) if relationship.uselist: deque.extend(related) elif related is not None: deque.append(related) The function can be demonstrated as follows:: Base = declarative_base() class A(Base): __tablename__ = 'a' id = Column(Integer, primary_key=True) bs = relationship("B", backref="a") class B(Base): __tablename__ = 'b' id = Column(Integer, primary_key=True) a_id = Column(ForeignKey('a.id')) c_id = Column(ForeignKey('c.id')) c = relationship("C", backref="bs") class C(Base): __tablename__ = 'c' id = Column(Integer, primary_key=True) a1 = A(bs=[B(), B(c=C())]) for obj in walk(a1): print(obj) Output:: <__main__.A object at 0x10303b190> <__main__.B object at 0x103025210> <__main__.B object at 0x10303b0d0> <__main__.C object at 0x103025490> Is there a way to automagically have only unique keywords (or other kinds of objects) without doing a query for the keyword and getting a reference to the row containing that keyword? --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- When people read the many-to-many example in the docs, they get hit with the fact that if you create the same ``Keyword`` twice, it gets put in the DB twice. Which is somewhat inconvenient. This `UniqueObject `_ recipe was created to address this issue. .. _faq_post_update_update: Why does post_update emit UPDATE in addition to the first UPDATE? ----------------------------------------------------------------- The post_update feature, documented at :ref:`post_update`, involves that an UPDATE statement is emitted in response to changes to a particular relationship-bound foreign key, in addition to the INSERT/UPDATE/DELETE that would normally be emitted for the target row. While the primary purpose of this UPDATE statement is that it pairs up with an INSERT or DELETE of that row, so that it can post-set or pre-unset a foreign key reference in order to break a cycle with a mutually dependent foreign key, it currently is also bundled as a second UPDATE that emits when the target row itself is subject to an UPDATE. In this case, the UPDATE emitted by post_update is *usually* unnecessary and will often appear wasteful. However, some research into trying to remove this "UPDATE / UPDATE" behavior reveals that major changes to the unit of work process would need to occur not just throughout the post_update implementation, but also in areas that aren't related to post_update for this to work, in that the order of operations would need to be reversed on the non-post_update side in some cases, which in turn can impact other cases, such as correctly handling an UPDATE of a referenced primary key value (see :ticket:`1063` for a proof of concept). The answer is that "post_update" is used to break a cycle between two mutually dependent foreign keys, and to have this cycle breaking be limited to just INSERT/DELETE of the target table implies that the ordering of UPDATE statements elsewhere would need to be liberalized, leading to breakage in other edge cases.