.. -*- coding: utf-8 -*- ======================================== Emacs Support for reStructuredText ======================================== :Author: Martin Blais :Date: $Date$ :Abstract: High-level description of the existing emacs support for editing reStructuredText text documents. Suggested setup code and usage instructions are provided. .. contents:: Introduction ============ reStructuredText_ is a series of conventions that allows a toolset--docutils--to extract generic document structure from simple text files. For people who use Emacs_, there is a package that adds some support for the conventions that reStructuredText_ specifies: ``rst.el``. This document describes the most important features that it provides, how to setup your emacs to use them and how to invoke them. Basic Setup =========== The emacs support is completely provided by the ``rst.el`` emacs package. In order to use these features, you need to put the file in your emacs load-path, and to load it with:: (require 'rst) ;; or (load "rst") Additional configuration variables can be customized and can be found by browsing the source code for ``rst.el``. Then you will want to bind keys to the most common commands it provides. A standard text-mode hook function is maintained and provided by the package for this use, set it up like this:: (add-hook 'text-mode-hook 'rst-text-mode-bindings) A prefix map is defined for all the ``rst.el`` commands. By default, it is bound to the mode-specific-map and ``p``, e.g. ``C-c p ...``. Section Decoration Adjustment ============================= The rst package does not completely parse all the reStructuredText_ constructs, but it contains the ability to recognize the section decorations and to build the hierarchy of the document. What we call section decorations or adornments are the underlines or under- and overlines used to mark a section title. There is a function that helps a great deal to maintain these decorations: ``rst-adjust`` (bound on ``C-c p a``, ``C-c p =`` or ``C-=`` by default). This function is a Swiss army knife that can be invoked repeatedly and whose behaviour depends on context: #. If there is an incomplete underline, e.g.:: My Section Title ^^ Invocation will complete the section title. You can simply enter a few characters of the title and invoke the function to complete it. It can also be used to adjust the length of the existing decoration when you need to edit the title. #. If there is no section decoration, a decoration one level under the last encountered section level is added; #. If there is already a section decoration, it is promoted to the next level. You can invoke it like this repeatedly to cycle the title through the hierarchy of existing decorations. Invoking the function with a negative prefix argument, e.g. ``C-- C-=``, will effectively reverse the direction of decoration cycling. To alternate between underline-only and over-and-under styles, you can use a regular prefix argument, e.g. ``C-u C-=``. See the documentation of ``rst-adjust`` for more description of the prefix arguments to alter the behaviour of the function. Promoting and Demoting Many Sections ------------------------------------ When you are re-organizing the structure of a document, it can be useful to change the level of a number of section titles. The same key binding can be used to do that: if the region is active when the binding is invoked, all the section titles that are within the region are promoted accordingly (or demoted, with negative prefix arg). Customizations -------------- You can set the variable ``rst-preferred-decorations`` to a list of the decorations that you like to use for documents. Everyone has their preference. ``rst-default-indent`` can be set to the number of indent spaces preferred for the over-and-under decoration style. Viewing the Hierarchy of Section Decorations ============================================ You can visualize the hierarchy of the section decorations in the current buffer by invoking ``rst-display-decorations-hierarchy``, bound on ``C-c p h``. A temporary buffer will appear with fake section titles rendered in the style of the current document. This can be useful when editing other people's documents to find out which section decorations correspond to which levels. Table of Contents ================= When you are editing long documents, it can be a bit difficult to orient yourself in the structure of your text. To that effect, a function is provided that quickly parses the document and presents a hierarchically indented table of contents of the document in a temporary buffer, in which you can navigate and press ``Return`` to go to a specific section. Invoke this function (``rst-toc``) with ``C-c p t``. It should present a temporary buffer that looks something like this:: Table of Contents: Debugging Meta-Techniques Introduction Debugging Solution Patterns Recognize That a Bug Exists Subdivide and Isolate Identify and Verify Assumptions Use a Tool for Introspection Change one thing at a time Learn about the System Understanding a bug The Basic Steps in Debugging Attitude Bad Feelings Good Feelings References When you select a section title, the temporary buffer disappears and you are left with the cursor positioned at the chosen section. Inserting a Table of Contents ----------------------------- Oftentimes in long text documents that are meant to be read directly, a Table of Contents is inserted at the beginning of the text. This is the case for most internet FAQs, for example. In reStructuredText_ documents, since the table of contents is automatically generated by the parser with the ``.. contents::`` directive, people generally have not been adding a text table of contents to their source documents, and partly because it is too much trouble to edit and maintain. The emacs support for reStructuredText_ provides a function to insert such a table of contents in your document. Since it is not meant to be part of the document text, you should place such a table of contents within a comment, so that it is ignored by the parser. This is the favoured usage:: .. contents:: .. 1 Introduction 2 Debugging Solution Patterns 2.1 Recognize That a Bug Exists 2.2 Subdivide and Isolate 2.3 Identify and Verify Assumptions 2.4 Use a Tool for Introspection 2.5 Change one thing at a time 2.6 Learn about the System 3 Understanding a bug 4 The Basic Steps in Debugging 5 Attitude 5.1 Bad Feelings 5.2 Good Feelings 6 References Just place the cursor at the top-left corner where you want to insert the TOC and invoke the function with ``C-c p i``. The table of contents will display all the section titles that are under the location where the insertion occurs. This way you can insert local table of contents by placing them in the appropriate location. If you have deep nesting of sections, you can use a numeric prefix argument to limit the depth of rendering of the TOC. You can also customize the look of the TOC by setting the values of the following variables:: ``rst-toc-indent``, ``rst-toc-insert-style``, ``rst-toc-insert-max-level``. Maintaining the Table of Contents Up-to-date -------------------------------------------- One issue is that you will probably want to maintain the inserted table of contents up-to-date. There is a function that will automatically look for the inserted TOC (``rst-toc-insert-update``) and it can be added to a hook on the section decoration adjustment function, so that every time you adjust a section title, the TOC is updated. Add this functionality with the following emacs configuration:: (add-hook 'rst-adjust-hook 'rst-toc-insert-update) You can invoke the update on the current buffer with ``C-c p u``. Navigating Between the Section Titles ===================================== You can move the cursor between the different sections by using the ``rst-backward-section`` and ``rst-forward-section`` functions, by default bound to the ``C-c p p`` and ``C-c p n`` keys (also ``C-c C-p`` and ``C-c C-n``). Shifting Bullet List Levels =========================== Due to the nature of reStructuredText_, bullet lists are always indented by two characters (unless they are part of a blockquote), e.g. :: - Fruits - Bananas - Apples - Oranges - Veggies - Zucchini - Chick Peas To this effect, when re-organizing bullet lists, it can be useful to shift regions of text by indents of two characters. You can use the ``C-c C-r`` and ``C-c C-l`` to shift the current region. These bindings are similar to the ones provided by python-mode for editing python code and behave similarly. Major Mode for Editing reStructuredText Documents ================================================= There is a major mode available for editing and syntax highlighting reStructuredText_ constructs. This mode was written by Stefan Merten [#]_. It mostly provides lazy syntax coloring for many of the constructs that reStructuredText_ prescribes. To enable this mode, type ``M-x rst-mode`` or you can set up an ``auto-mode-alist`` to automatically turn it on whenever you visit reStructuredText_ documents:: (add-to-list 'auto-mode-alist '("\\.rst$" . rst-mode) ) If have local variables enabled (see ``enable-local-variables`` in the Emacs manual), you can also add the following at the top of your documents to trigger rst-mode:: .. -*- mode: rst -*- Or add this at the end of your documents:: .. Local Variables: mode: rst End: By default, the font-lock colouring is performed lazily. If you don't like this, you can turn this off by setting the value of ``rst-mode-lazy``. You can also change the various colours (see the source file for the whole list of customizable faces). .. [#] This mode used to be provided by the file ``rst-mode.el`` and has now been integrated with the rest of the emacs code. Converting Documents from Emacs =============================== At the moment there is minimal support for calling the conversion tools from within Emacs. You can add a key binding like this to invoke it:: (local-set-key [(control c)(?9)] 'rst-compile) This function basically creates a compilation command with the correct output name for the current buffer and then invokes Emacs' compile function. It also looks for the presence of a ``docutils.conf`` configuration file in the parent directories and adds it to the cmdline options. You can customize which tool is used to perform the conversion and some standard options to always be added as well. Invocation uses the toolset indicated by ``rst-compile-primary-toolset`` (default is ``'html``). Invocation with a prefix argument uses ``rst-compile-secondary-toolset`` (default is ``'latex``). .. note:: In general it is preferred to use a Makefile to automate the conversion of many documents or a hierarchy of documents. The functionality presented above is meant to be convenient for use on single files. Other / External Useful Emacs Settings ====================================== This section covers general emacs text-mode settings that are useful in the context of reStructuredText_ conventions. These are not provided by ``rst.el`` but you may find them useful specifically for reStructuredText_ documents. Settings for Filling Lists -------------------------- One problem with the default text-mode settings is that *filling* long lines in bullet and enumerated lists that do not have an empty line between them merges them together, e.g.:: - Bananas; - One Apple a day keeps the doctor away, and eating more keeps the pirates at bay; - Oranges; Becomes:: - Bananas; One Apple a day keeps the doctor away, and eating more - keeps the pirates at bay; Oranges; This is usually not what you want. What you want is this:: - Bananas; - One Apple a day keeps the doctor away, and eating more keeps the pirates at bay; - Oranges; The problem is that emacs does not recognize the various consecutive items as forming paragraph boundaries. You can fix this easily by changing the global value of the parapraph boundary detection to recognize such lists, using the ``rst-set-paragraph-separation`` function:: (add-hook 'text-mode-hook 'rst-set-paragraph-separation) ``text-mode`` Settings ---------------------- Consult the Emacs manual for more text-mode customizations. In particular, you may be interested in setting the following variables, functions and modes that pertain somewhat to text-mode: - indent-tabs-mode - colon-double-space - auto-fill-mode - auto-mode-alist - fill-region Editing Tables: Emacs table mode -------------------------------- You may want to check out `Emacs table mode`_ to create an edit tables, it allows creating ascii tables compatible with reStructuredText_. .. _Emacs table mode: http://table.sourceforge.net/ Character Processing -------------------- Since reStructuredText punts on the issue of character processing, here are some useful resources for Emacs users in the Unicode world: * `xmlunicode.el and unichars.el from Norman Walsh `__ * `An essay by Tim Bray, with example code `__ * For Emacs users on Mac OS X, here are some useful useful additions to your .emacs file. - To get direct keyboard input of non-ASCII characters (like "option-e e" resulting in "é" [eacute]), first enable the option key by setting the command key as your meta key:: (setq mac-command-key-is-meta t) ;; nil for option key Next, use one of these lines:: (set-keyboard-coding-system 'mac-roman) (setq mac-keyboard-text-encoding kTextEncodingISOLatin1) I prefer the first line, because it enables non-Latin-1 characters as well (em-dash, curly quotes, etc.). - To enable the display of all characters in the Mac-Roman charset, first create a fontset listing the fonts to use for each range of characters using charsets that Emacs understands:: (create-fontset-from-fontset-spec "-apple-monaco-medium-r-normal--10-*-*-*-*-*-fontset-monaco, ascii:-apple-monaco-medium-r-normal--10-100-75-75-m-100-mac-roman, latin-iso8859-1:-apple-monaco-medium-r-normal--10-100-75-75-m-100-mac-roman, mule-unicode-0100-24ff:-apple-monaco-medium-r-normal--10-100-75-75-m-100-mac-roman") Latin-1 doesn't cover characters like em-dash and curly quotes, so "mule-unicode-0100-24ff" is needed. Next, use that fontset:: (set-frame-font "fontset-monaco") - To enable cooperation between the system clipboard and the Emacs kill ring, add this line:: (set-clipboard-coding-system 'mac-roman) Other useful resources are in `Andrew Choi's Emacs 21 for Mac OS X FAQ `__. No matter what platform (or editor) you're using, I recommend the ProFont__ programmer's font. It's monospaced, small but readable, similar characters are visually distinctive (like "I1l|", "0O", "ao", and ".,:;"), and free. __ http://www.tobias-jung.de/seekingprofont/ Credits ======= - The automatic section adjustment and table of contents features were written by Martin Blais; - ``rst-mode`` and its syntax highlighting was implemented by Stefan Merten; - Various other functions were implemented by David Goodger. Obsolete Files ============== On 2005-10-30, ``restructuredtext.el``, ``rst-html.el`` and ``rst-mode.el`` were merged to form the new ``rst.el``. You can consider the old files obsolete and remove them. Future Work =========== Here are some features and ideas that will be worked on in the future, in those frenzied mornings of excitement over the virtues of the one-true-way kitchen sink of editors: - It would be nice to differentiate between text files using reStructuredText_ and other general text files. If we had a function to automatically guess whether a .txt file is following the reStructuredText_ conventions, we could trigger rst-mode without having to hard-code this in every text file, nor forcing the user to add a local mode variable at the top of the file. We could perform this guessing by searching for a valid decoration at the top of the document or searching for reStructuredText_ directives further on. - The suggested decorations when adjusting should not have to cycle below one below the last section decoration level preceding the cursor. We need to fix that. .. _Emacs: http://www.gnu.org/software/emacs/emacs.html .. _reStructuredText: http://docutils.sf.net/rst.html .. Local Variables: mode: indented-text indent-tabs-mode: nil sentence-end-double-space: t fill-column: 70 End: