28e626bde00 added the concept of IOOps but neglected to include writeback operations. ac8d53dae5 added time spent doing these I/O operations. Without counting writeback, checkpointer write time in the log often differed substantially from that in pg_stat_io. To fix this, add IOOp IOOP_WRITEBACK and track writeback in pg_stat_io. Bumps catversion. Author: Melanie Plageman <melanieplageman@gmail.com> Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com> Reported-by: Andres Freund <andres@anarazel.de> Discussion: https://postgr.es/m/20230419172326.dhgyo4wrrhulovt6%40awork3.anarazel.de
For clarity of review, renaming the function parameter "context" in ScheduleBufferTagForWriteback() and IssuePendingWritebacks() to "wb_context" is a separate commit. The next commit adds an "io_context" parameter and "wb_context" makes it more clear which is which. Author: Melanie Plageman <melanieplageman@gmail.com> Discussion: https://postgr.es/m/CAAKRu_acc6iL4M3hvOTeztf_ZPpsB3Pqio5aVHgZ5q=Pi3BZKg@mail.gmail.com
The recently added inclusion of guc.h in smgr.h is not necessary and introduces more server-related stuff. Removing the directive helps avoid potential issues with including sgmr.h in frontends. Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com> Discussion: https://postgr.es/m/20230425.115748.2130383825066921512.horikyota.ntt%40gmail.com
vacuum_defer_cleanup_age was introduced before hot_standby_feedback and replication slots existed. It is hard to use reasonably - commonly it will either be set too low (not preventing recovery conflicts, while still causing some bloat), or too high (causing a lot of bloat). The alternatives do not have that issue. That on its own might not be sufficient reason to remove vacuum_defer_cleanup_age, but it also complicates computation of xid horizons. See e.g. the bug fixed in be504a3e974. It also is untested. This commit removes TransactionIdRetreatSafely(), as there are no users anymore. There might be potential future users, hence noting that here. Reviewed-by: Daniel Gustafsson <daniel@yesql.se> Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org> Discussion: https://postgr.es/m/20230317230930.nhsgk3qfk7f4axls@awork3.anarazel.de
Author: Justin Pryzby Reviewed-by: David Rowley Discussion: https://postgr.es/m/ZD3D1QxoccnN8A1V@telsasoft.com
Make sure that function declarations use names that exactly match the corresponding names from function definitions in a few places. These inconsistencies were all introduced relatively recently, after the code base had parameter name mismatches fixed in bulk (see commits starting with commits 4274dc22 and 035ce1fe). pg_bsd_indent still has a couple of similar inconsistencies, which I (pgeoghegan) have left untouched for now. Like all earlier commits that cleaned up function parameter names, this commit was written with help from clang-tidy.
During WAL replay on the standby, when a conflict with a logical slot is identified, invalidate such slots. There are two sources of conflicts: 1) Using the information added in 6af1793954e, logical slots are invalidated if required rows are removed 2) wal_level on the primary server is reduced to below logical Uses the infrastructure introduced in the prior commit. FIXME: add commit reference. Change InvalidatePossiblyObsoleteSlot() to use a recovery conflict to interrupt use of a slot, if called in the startup process. The new recovery conflict is added to pg_stat_database_conflicts, as confl_active_logicalslot. See 6af1793954e for an overall design of logical decoding on a standby. Bumps catversion for the addition of the pg_stat_database_conflicts column. Bumps PGSTAT_FILE_FORMAT_ID for the same reason. Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com> Author: Andres Freund <andres@anarazel.de> Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version) Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com> Reviewed-by: Andres Freund <andres@anarazel.de> Reviewed-by: Robert Haas <robertmhaas@gmail.com> Reviewed-by: FabrÃzio de Royes Mello <fabriziomello@gmail.com> Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com> Reviewed-by: Amit Kapila <amit.kapila16@gmail.com> Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org> Discussion: https://postgr.es/m/20230407075009.igg7be27ha2htkbt@awork3.anarazel.de
Provide a way to ask the kernel to use O_DIRECT (or local equivalent) where available for data and WAL files, to avoid or minimize kernel caching. This hurts performance currently and is not intended for end users yet. Later proposed work would introduce our own I/O clustering, read-ahead, etc to replace the facilities the kernel disables with this option. The only user-visible change, if the developer-only GUC is not used, is that this commit also removes the obscure logic that would activate O_DIRECT for the WAL when wal_sync_method=open_[data]sync and wal_level=minimal (which also requires max_wal_senders=0). Those are non-default and unlikely settings, and this behavior wasn't (correctly) documented. The same effect can be achieved with io_direct=wal. Author: Thomas Munro <thomas.munro@gmail.com> Author: Andres Freund <andres@anarazel.de> Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com> Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com> Discussion: https://postgr.es/m/CA%2BhUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg%40mail.gmail.com
In order to have the option to use O_DIRECT/FILE_FLAG_NO_BUFFERING in a later commit, we need the addresses of user space buffers to be well aligned. The exact requirements vary by OS and file system (typically sectors and/or memory pages). The address alignment size is set to 4096, which is enough for currently known systems: it matches modern sectors and common memory page size. There is no standard governing O_DIRECT's requirements so we might eventually have to reconsider this with more information from the field or future systems. Aligning I/O buffers on memory pages is also known to improve regular buffered I/O performance. Three classes of I/O buffers for regular data pages are adjusted: (1) Heap buffers are now allocated with the new palloc_aligned() or MemoryContextAllocAligned() functions introduced by commit 439f6175. (2) Stack buffers now use a new struct PGIOAlignedBlock to respect PG_IO_ALIGN_SIZE, if possible with this compiler. (3) The buffer pool is also aligned in shared memory. WAL buffers were already aligned on XLOG_BLCKSZ. It's possible for XLOG_BLCKSZ to be configured smaller than PG_IO_ALIGNED_SIZE and thus for O_DIRECT WAL writes to fail to be well aligned, but that's a pre-existing condition and will be addressed by a later commit. BufFiles are not yet addressed (there's no current plan to use O_DIRECT for those, but they could potentially get some incidental speedup even in plain buffered I/O operations through better alignment). If we can't align stack objects suitably using the compiler extensions we know about, we disable the use of O_DIRECT by setting PG_O_DIRECT to 0. This avoids the need to consider systems that have O_DIRECT but can't align stack objects the way we want; such systems could in theory be supported with more work but we don't currently know of any such machines, so it's easier to pretend there is no O_DIRECT support instead. That's an existing and tested class of system. Add assertions that all buffers passed into smgrread(), smgrwrite() and smgrextend() are correctly aligned, unless PG_O_DIRECT is 0 (= stack alignment tricks may be unavailable) or the block size has been set too small to allow arrays of buffers to be all aligned. Author: Thomas Munro <thomas.munro@gmail.com> Author: Andres Freund <andres@anarazel.de> Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> Discussion: https://postgr.es/m/CA+hUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg@mail.gmail.com
Add new options to the VACUUM and ANALYZE commands called BUFFER_USAGE_LIMIT to allow users more control over how large to make the buffer access strategy that is used to limit the usage of buffers in shared buffers. Larger rings can allow VACUUM to run more quickly but have the drawback of VACUUM possibly evicting more buffers from shared buffers that might be useful for other queries running on the database. Here we also add a new GUC named vacuum_buffer_usage_limit which controls how large to make the access strategy when it's not specified in the VACUUM/ANALYZE command. This defaults to 256KB, which is the same size as the access strategy was prior to this change. This setting also controls how large to make the buffer access strategy for autovacuum. Per idea by Andres Freund. Author: Melanie Plageman Reviewed-by: David Rowley Reviewed-by: Andres Freund Reviewed-by: Justin Pryzby Reviewed-by: Bharath Rupireddy Discussion: https://postgr.es/m/20230111182720.ejifsclfwymw2reb@awork3.anarazel.de