/* op.h * * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, * 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 by Larry Wall and others * * You may distribute under the terms of either the GNU General Public * License or the Artistic License, as specified in the README file. * */ /* * The fields of BASEOP are: * op_next Pointer to next ppcode to execute after this one. * (Top level pre-grafted op points to first op, * but this is replaced when op is grafted in, when * this op will point to the real next op, and the new * parent takes over role of remembering starting op.) * op_ppaddr Pointer to current ppcode's function. * op_type The type of the operation. * op_opt Whether or not the op has been optimised by the * peephole optimiser. * op_slabbed allocated via opslab * op_static tell op_free() to skip PerlMemShared_free(), when * !op_slabbed. * op_savefree on savestack via SAVEFREEOP * op_folded Result/remainder of a constant fold operation. * op_spare Two spare bits * op_flags Flags common to all operations. See OPf_* below. * op_private Flags peculiar to a particular operation (BUT, * by default, set to the number of children until * the operation is privatized by a check routine, * which may or may not check number of children). */ #include "op_reg_common.h" #define OPCODE U16 #ifdef PERL_MAD # define MADPROP_IN_BASEOP MADPROP* op_madprop; #else # define MADPROP_IN_BASEOP #endif typedef PERL_BITFIELD16 Optype; #ifdef BASEOP_DEFINITION #define BASEOP BASEOP_DEFINITION #else #define BASEOP \ OP* op_next; \ OP* op_sibling; \ OP* (*op_ppaddr)(pTHX); \ MADPROP_IN_BASEOP \ PADOFFSET op_targ; \ PERL_BITFIELD16 op_type:9; \ PERL_BITFIELD16 op_opt:1; \ PERL_BITFIELD16 op_slabbed:1; \ PERL_BITFIELD16 op_savefree:1; \ PERL_BITFIELD16 op_static:1; \ PERL_BITFIELD16 op_folded:1; \ PERL_BITFIELD16 op_spare:2; \ U8 op_flags; \ U8 op_private; #endif /* If op_type:9 is changed to :10, also change PUSHEVAL in cop.h. Also, if the type of op_type is ever changed (e.g. to PERL_BITFIELD32) then all the other bit-fields before/after it should change their types too to let VC pack them into the same 4 byte integer.*/ /* for efficiency, requires OPf_WANT_VOID == G_VOID etc */ #define OP_GIMME(op,dfl) \ (((op)->op_flags & OPf_WANT) ? ((op)->op_flags & OPf_WANT) : dfl) #define OP_GIMME_REVERSE(flags) ((flags) & G_WANT) /* =head1 "Gimme" Values =for apidoc Amn|U32|GIMME_V The XSUB-writer's equivalent to Perl's C. Returns C, C or C for void, scalar or list context, respectively. See L for a usage example. =for apidoc Amn|U32|GIMME A backward-compatible version of C which can only return C or C; in a void context, it returns C. Deprecated. Use C instead. =cut */ #define GIMME_V OP_GIMME(PL_op, block_gimme()) /* Public flags */ #define OPf_WANT 3 /* Mask for "want" bits: */ #define OPf_WANT_VOID 1 /* Want nothing */ #define OPf_WANT_SCALAR 2 /* Want single value */ #define OPf_WANT_LIST 3 /* Want list of any length */ #define OPf_KIDS 4 /* There is a firstborn child. */ #define OPf_PARENS 8 /* This operator was parenthesized. */ /* (Or block needs explicit scope entry.) */ #define OPf_REF 16 /* Certified reference. */ /* (Return container, not containee). */ #define OPf_MOD 32 /* Will modify (lvalue). */ #define OPf_STACKED 64 /* Some arg is arriving on the stack. */ #define OPf_SPECIAL 128 /* Do something weird for this op: */ /* On local LVAL, don't init local value. */ /* On OP_SORT, subroutine is inlined. */ /* On OP_NOT, inversion was implicit. */ /* On OP_LEAVE, don't restore curpm. */ /* On truncate, we truncate filehandle */ /* On control verbs, we saw no label */ /* On flipflop, we saw ... instead of .. */ /* On UNOPs, saw bare parens, e.g. eof(). */ /* On OP_ENTERSUB || OP_NULL, saw a "do". */ /* On OP_EXISTS, treat av as av, not avhv. */ /* On OP_(ENTER|LEAVE)EVAL, don't clear $@ */ /* On pushre, rx is used as part of split, e.g. split " " */ /* On regcomp, "use re 'eval'" was in scope */ /* On OP_READLINE, was <$filehandle> */ /* On RV2[ACGHS]V, don't create GV--in defined()*/ /* On OP_DBSTATE, indicates breakpoint * (runtime property) */ /* On OP_REQUIRE, was seen as CORE::require */ /* On OP_(ENTER|LEAVE)WHEN, there's no condition */ /* On OP_SMARTMATCH, an implicit smartmatch */ /* On OP_ANONHASH and OP_ANONLIST, create a reference to the new anon hash or array */ /* On OP_HELEM and OP_HSLICE, localization will be followed by assignment, so do not wipe the target if it is special (e.g. a glob or a magic SV) */ /* On OP_MATCH, OP_SUBST & OP_TRANS, the operand of a logical or conditional that was optimised away, so it should not be bound via =~ */ /* On OP_CONST, from a constant CV */ /* On OP_GLOB, two meanings: - Before ck_glob, called as CORE::glob - After ck_glob, use Perl glob function */ /* On OP_PADRANGE, push @_ */ /* On OP_DUMP, has no label */ /* old names; don't use in new code, but don't break them, either */ #define OPf_LIST OPf_WANT_LIST #define OPf_KNOW OPf_WANT #define GIMME \ (PL_op->op_flags & OPf_WANT \ ? ((PL_op->op_flags & OPf_WANT) == OPf_WANT_LIST \ ? G_ARRAY \ : G_SCALAR) \ : dowantarray()) /* Lower bits of op_private often carry the number of arguments, as * set by newBINOP, newUNOP and ck_fun */ /* NOTE: OP_NEXTSTATE and OP_DBSTATE (i.e. COPs) carry NATIVE_HINTS * in op_private */ /* Private for lvalues */ #define OPpLVAL_INTRO 128 /* Lvalue must be localized or lvalue sub */ /* Private for OPs with TARGLEX */ /* (lower bits may carry MAXARG) */ #define OPpTARGET_MY 16 /* Target is PADMY. */ /* Private for OP_LEAVE, OP_LEAVESUB, OP_LEAVESUBLV and OP_LEAVEWRITE */ #define OPpREFCOUNTED 64 /* op_targ carries a refcount */ /* Private for OP_LEAVE and OP_LEAVELOOP */ #define OPpLVALUE 128 /* Do not copy return value */ /* Private for OP_AASSIGN */ #define OPpASSIGN_COMMON 64 /* Left & right have syms in common. */ /* Private for OP_SASSIGN */ #define OPpASSIGN_BACKWARDS 64 /* Left & right switched. */ #define OPpASSIGN_CV_TO_GV 128 /* Possible optimisation for constants. */ /* Private for OP_MATCH and OP_SUBST{,CONT} */ #define OPpRUNTIME 64 /* Pattern coming in on the stack */ /* Private for OP_TRANS */ #define OPpTRANS_FROM_UTF 1 #define OPpTRANS_TO_UTF 2 #define OPpTRANS_IDENTICAL 4 /* right side is same as left */ #define OPpTRANS_SQUASH 8 /* 16 is used for OPpTARGET_MY */ #define OPpTRANS_COMPLEMENT 32 #define OPpTRANS_GROWS 64 #define OPpTRANS_DELETE 128 #define OPpTRANS_ALL (OPpTRANS_FROM_UTF|OPpTRANS_TO_UTF|OPpTRANS_IDENTICAL|OPpTRANS_SQUASH|OPpTRANS_COMPLEMENT|OPpTRANS_GROWS|OPpTRANS_DELETE) /* Private for OP_REPEAT */ #define OPpREPEAT_DOLIST 64 /* List replication. */ /* Private for OP_RV2GV, OP_RV2SV, OP_AELEM, OP_HELEM, OP_PADSV */ #define OPpDEREF (32|64) /* autovivify: Want ref to something: */ #define OPpDEREF_AV 32 /* Want ref to AV. */ #define OPpDEREF_HV 64 /* Want ref to HV. */ #define OPpDEREF_SV (32|64) /* Want ref to SV. */ /* OP_ENTERSUB and OP_RV2CV flags Flags are set on entersub and rv2cv in three phases: parser - the parser passes the flag to the op constructor check - the check routine called by the op constructor sets the flag context - application of scalar/ref/lvalue context applies the flag In the third stage, an entersub op might turn into an rv2cv op (undef &foo, \&foo, lock &foo, exists &foo, defined &foo). The two places where that happens (op_lvalue_flags and doref in op.c) need to make sure the flags do not conflict. Flags applied in the context phase are only set when there is no conversion of op type. bit entersub flag phase rv2cv flag phase --- ------------- ----- ---------- ----- 1 OPpENTERSUB_INARGS context OPpMAY_RETURN_CONSTANT context 2 HINT_STRICT_REFS check HINT_STRICT_REFS check 4 OPpENTERSUB_HASTARG check 8 OPpENTERSUB_AMPER parser 16 OPpENTERSUB_DB check 32 OPpDEREF_AV context 64 OPpDEREF_HV context 128 OPpLVAL_INTRO context OPpENTERSUB_NOPAREN parser */ /* OP_ENTERSUB only */ #define OPpENTERSUB_DB 16 /* Debug subroutine. */ #define OPpENTERSUB_HASTARG 4 /* Called from OP tree. */ #define OPpENTERSUB_INARGS 1 /* Lval used as arg to a sub. */ /* used by OPpDEREF (32|64) */ /* used by HINT_STRICT_REFS 2 */ /* Mask for OP_ENTERSUB flags, the absence of which must be propagated in dynamic context */ #define OPpENTERSUB_LVAL_MASK (OPpLVAL_INTRO|OPpENTERSUB_INARGS) /* OP_RV2CV only */ #define OPpENTERSUB_AMPER 8 /* Used & form to call. */ #define OPpENTERSUB_NOPAREN 128 /* bare sub call (without parens) */ #define OPpMAY_RETURN_CONSTANT 1 /* If a constant sub, return the constant */ /* OP_GV only */ #define OPpEARLY_CV 32 /* foo() called before sub foo was parsed */ /* OP_?ELEM only */ #define OPpLVAL_DEFER 16 /* Defer creation of array/hash elem */ /* OP_RV2[AH]V OP_[AH]SLICE */ #define OPpSLICEWARNING 4 /* warn about @hash{$scalar} */ /* OP_RV2[SAH]V, OP_GVSV, OP_ENTERITER only */ #define OPpOUR_INTRO 16 /* Variable was in an our() */ /* OP_RV2[AGH]V, OP_PAD[AH]V, OP_[AH]ELEM, OP_[AH]SLICE OP_AV2ARYLEN, OP_R?KEYS, OP_SUBSTR, OP_POS, OP_VEC */ #define OPpMAYBE_LVSUB 8 /* We might be an lvalue to return */ /* OP_RV2HV and OP_PADHV */ #define OPpTRUEBOOL 32 /* %hash in (%hash || $foo) in void context */ #define OPpMAYBE_TRUEBOOL 64 /* %hash in (%hash || $foo) where cx is not known till run time */ /* OP_SUBSTR only */ #define OPpSUBSTR_REPL_FIRST 16 /* 1st arg is replacement string */ /* OP_PADSV only */ #define OPpPAD_STATE 16 /* is a "state" pad */ /* for OP_RV2?V, lower bits carry hints (currently only HINT_STRICT_REFS) */ /* OP_PADRANGE only */ /* bit 7 is OPpLVAL_INTRO */ #define OPpPADRANGE_COUNTMASK 127 /* bits 6..0 hold target range, */ #define OPpPADRANGE_COUNTSHIFT 7 /* 7 bits in total */ /* OP_RV2GV only */ #define OPpDONT_INIT_GV 4 /* Call gv_fetchpv with GV_NOINIT */ /* (Therefore will return whatever is currently in the symbol table, not guaranteed to be a PVGV) */ #define OPpALLOW_FAKE 16 /* OK to return fake glob */ /* Private for OP_ENTERITER and OP_ITER */ #define OPpITER_REVERSED 4 /* for (reverse ...) */ #define OPpITER_DEF 8 /* for $_ or for my $_ */ /* Private for OP_CONST */ #define OPpCONST_NOVER 2 /* no 6; */ #define OPpCONST_SHORTCIRCUIT 4 /* eg the constant 5 in (5 || foo) */ #define OPpCONST_STRICT 8 /* bareword subject to strict 'subs' */ #define OPpCONST_ENTERED 16 /* Has been entered as symbol. */ #define OPpCONST_BARE 64 /* Was a bare word (filehandle?). */ /* Private for OP_FLIP/FLOP */ #define OPpFLIP_LINENUM 64 /* Range arg potentially a line num. */ /* Private for OP_LIST */ #define OPpLIST_GUESSED 64 /* Guessed that pushmark was needed. */ /* Private for OP_DELETE */ #define OPpSLICE 64 /* Operating on a list of keys */ /* Also OPpLVAL_INTRO (128) */ /* Private for OP_EXISTS */ #define OPpEXISTS_SUB 64 /* Checking for &sub, not {} or []. */ /* Private for OP_SORT */ #define OPpSORT_NUMERIC 1 /* Optimized away { $a <=> $b } */ #define OPpSORT_INTEGER 2 /* Ditto while under "use integer" */ #define OPpSORT_REVERSE 4 /* Reversed sort */ #define OPpSORT_INPLACE 8 /* sort in-place; eg @a = sort @a */ #define OPpSORT_DESCEND 16 /* Descending sort */ #define OPpSORT_QSORT 32 /* Use quicksort (not mergesort) */ #define OPpSORT_STABLE 64 /* Use a stable algorithm */ /* Private for OP_REVERSE */ #define OPpREVERSE_INPLACE 8 /* reverse in-place (@a = reverse @a) */ /* Private for OP_OPEN and OP_BACKTICK */ #define OPpOPEN_IN_RAW 16 /* binmode(F,":raw") on input fh */ #define OPpOPEN_IN_CRLF 32 /* binmode(F,":crlf") on input fh */ #define OPpOPEN_OUT_RAW 64 /* binmode(F,":raw") on output fh */ #define OPpOPEN_OUT_CRLF 128 /* binmode(F,":crlf") on output fh */ /* Private for COPs */ #define OPpHUSH_VMSISH 32 /* hush DCL exit msg vmsish mode*/ /* Note: Used for NATIVE_HINTS (shifted from the values in PL_hints), currently defined by vms/vmsish.h: 64 128 */ /* Private for OP_FTXXX */ #define OPpFT_ACCESS 2 /* use filetest 'access' */ #define OPpFT_STACKED 4 /* stacked filetest, as "-f" in "-f -x $f" */ #define OPpFT_STACKING 8 /* stacking filetest, as "-x" in "-f -x $f" */ #define OPpFT_AFTER_t 16 /* previous op was -t */ /* Private for OP_(MAP|GREP)(WHILE|START) */ #define OPpGREP_LEX 2 /* iterate over lexical $_ */ /* Private for OP_ENTEREVAL */ #define OPpEVAL_HAS_HH 2 /* Does it have a copy of %^H */ #define OPpEVAL_UNICODE 4 #define OPpEVAL_BYTES 8 #define OPpEVAL_COPHH 16 /* Construct %^H from cop hints */ #define OPpEVAL_RE_REPARSING 32 /* eval_sv(..., G_RE_REPARSING) */ /* Private for OP_CALLER, OP_WANTARRAY and OP_RUNCV */ #define OPpOFFBYONE 128 /* Treat caller(1) as caller(2) */ /* Private for OP_COREARGS */ /* These must not conflict with OPpDONT_INIT_GV or OPpALLOW_FAKE. See pp.c:S_rv2gv. */ #define OPpCOREARGS_DEREF1 1 /* Arg 1 is a handle constructor */ #define OPpCOREARGS_DEREF2 2 /* Arg 2 is a handle constructor */ #define OPpCOREARGS_SCALARMOD 64 /* \$ rather than \[$@%*] */ #define OPpCOREARGS_PUSHMARK 128 /* Call pp_pushmark */ /* Private for OP_(LAST|REDO|NEXT|GOTO|DUMP) */ #define OPpPV_IS_UTF8 128 /* label is in UTF8 */ /* Private for OP_SPLIT */ #define OPpSPLIT_IMPLIM 128 /* implicit limit */ struct op { BASEOP }; struct unop { BASEOP OP * op_first; }; struct binop { BASEOP OP * op_first; OP * op_last; }; struct logop { BASEOP OP * op_first; OP * op_other; }; struct listop { BASEOP OP * op_first; OP * op_last; }; struct pmop { BASEOP OP * op_first; OP * op_last; #ifdef USE_ITHREADS PADOFFSET op_pmoffset; #else REGEXP * op_pmregexp; /* compiled expression */ #endif U32 op_pmflags; union { OP * op_pmreplroot; /* For OP_SUBST */ #ifdef USE_ITHREADS PADOFFSET op_pmtargetoff; /* For OP_PUSHRE */ #else GV * op_pmtargetgv; #endif } op_pmreplrootu; union { OP * op_pmreplstart; /* Only used in OP_SUBST */ #ifdef USE_ITHREADS PADOFFSET op_pmstashoff; /* Only used in OP_MATCH, with PMf_ONCE set */ #else HV * op_pmstash; #endif } op_pmstashstartu; OP * op_code_list; /* list of (?{}) code blocks */ }; #ifdef USE_ITHREADS #define PM_GETRE(o) (SvTYPE(PL_regex_pad[(o)->op_pmoffset]) == SVt_REGEXP \ ? (REGEXP*)(PL_regex_pad[(o)->op_pmoffset]) : NULL) /* The assignment is just to enforce type safety (or at least get a warning). */ /* With first class regexps not via a reference one needs to assign &PL_sv_undef under ithreads. (This would probably work unthreaded, but NULL is cheaper. I guess we could allow NULL, but the check above would get more complex, and we'd have an AV with (SV*)NULL in it, which feels bad */ /* BEWARE - something that calls this macro passes (r) which has a side effect. */ #define PM_SETRE(o,r) STMT_START { \ REGEXP *const _pm_setre = (r); \ assert(_pm_setre); \ PL_regex_pad[(o)->op_pmoffset] = MUTABLE_SV(_pm_setre); \ } STMT_END #else #define PM_GETRE(o) ((o)->op_pmregexp) #define PM_SETRE(o,r) ((o)->op_pmregexp = (r)) #endif /* Leave some space, so future bit allocations can go either in the shared or * unshared area without affecting binary compatibility */ #define PMf_BASE_SHIFT (_RXf_PMf_SHIFT_NEXT+6) /* 'use re "taint"' in scope: taint $1 etc. if target tainted */ #define PMf_RETAINT (1<<(PMf_BASE_SHIFT+0)) /* match successfully only once per reset, with related flag RXf_USED in * re->extflags holding state. This is used only for ?? matches, and only on * OP_MATCH and OP_QR */ #define PMf_ONCE (1<<(PMf_BASE_SHIFT+1)) /* PMf_ONCE, i.e. ?pat?, has matched successfully. Not used under threading. */ #define PMf_USED (1<<(PMf_BASE_SHIFT+3)) /* subst replacement is constant */ #define PMf_CONST (1<<(PMf_BASE_SHIFT+4)) /* keep 1st runtime pattern forever */ #define PMf_KEEP (1<<(PMf_BASE_SHIFT+5)) #define PMf_GLOBAL (1<<(PMf_BASE_SHIFT+6)) /* pattern had a g modifier */ /* don't reset pos() if //g fails */ #define PMf_CONTINUE (1<<(PMf_BASE_SHIFT+7)) /* evaluating replacement as expr */ #define PMf_EVAL (1<<(PMf_BASE_SHIFT+8)) /* Return substituted string instead of modifying it. */ #define PMf_NONDESTRUCT (1<<(PMf_BASE_SHIFT+9)) /* the pattern has a CV attached (currently only under qr/...(?{}).../) */ #define PMf_HAS_CV (1<<(PMf_BASE_SHIFT+10)) /* op_code_list is private; don't free it etc. It may well point to * code within another sub, with different pad etc */ #define PMf_CODELIST_PRIVATE (1<<(PMf_BASE_SHIFT+11)) /* the PMOP is a QR (we should be able to detect that from the op type, * but the regex compilation API passes just the pm flags, not the op * itself */ #define PMf_IS_QR (1<<(PMf_BASE_SHIFT+12)) #define PMf_USE_RE_EVAL (1<<(PMf_BASE_SHIFT+13)) /* use re'eval' in scope */ #if PMf_BASE_SHIFT+13 > 31 # error Too many PMf_ bits used. See above and regnodes.h for any spare in middle #endif #ifdef USE_ITHREADS # define PmopSTASH(o) ((o)->op_pmflags & PMf_ONCE \ ? PL_stashpad[(o)->op_pmstashstartu.op_pmstashoff] \ : NULL) # define PmopSTASH_set(o,hv) \ (assert_((o)->op_pmflags & PMf_ONCE) \ (o)->op_pmstashstartu.op_pmstashoff = \ (hv) ? alloccopstash(hv) : 0) #else # define PmopSTASH(o) \ (((o)->op_pmflags & PMf_ONCE) ? (o)->op_pmstashstartu.op_pmstash : NULL) # if defined (DEBUGGING) && defined(__GNUC__) && !defined(PERL_GCC_BRACE_GROUPS_FORBIDDEN) # define PmopSTASH_set(o,hv) ({ \ assert((o)->op_pmflags & PMf_ONCE); \ ((o)->op_pmstashstartu.op_pmstash = (hv)); \ }) # else # define PmopSTASH_set(o,hv) ((o)->op_pmstashstartu.op_pmstash = (hv)) # endif #endif #define PmopSTASHPV(o) (PmopSTASH(o) ? HvNAME_get(PmopSTASH(o)) : NULL) /* op_pmstashstartu.op_pmstash is not refcounted */ #define PmopSTASHPV_set(o,pv) PmopSTASH_set((o), gv_stashpv(pv,GV_ADD)) struct svop { BASEOP SV * op_sv; }; struct padop { BASEOP PADOFFSET op_padix; }; struct pvop { BASEOP char * op_pv; }; struct loop { BASEOP OP * op_first; OP * op_last; OP * op_redoop; OP * op_nextop; OP * op_lastop; }; #define cUNOPx(o) ((UNOP*)o) #define cBINOPx(o) ((BINOP*)o) #define cLISTOPx(o) ((LISTOP*)o) #define cLOGOPx(o) ((LOGOP*)o) #define cPMOPx(o) ((PMOP*)o) #define cSVOPx(o) ((SVOP*)o) #define cPADOPx(o) ((PADOP*)o) #define cPVOPx(o) ((PVOP*)o) #define cCOPx(o) ((COP*)o) #define cLOOPx(o) ((LOOP*)o) #define cUNOP cUNOPx(PL_op) #define cBINOP cBINOPx(PL_op) #define cLISTOP cLISTOPx(PL_op) #define cLOGOP cLOGOPx(PL_op) #define cPMOP cPMOPx(PL_op) #define cSVOP cSVOPx(PL_op) #define cPADOP cPADOPx(PL_op) #define cPVOP cPVOPx(PL_op) #define cCOP cCOPx(PL_op) #define cLOOP cLOOPx(PL_op) #define cUNOPo cUNOPx(o) #define cBINOPo cBINOPx(o) #define cLISTOPo cLISTOPx(o) #define cLOGOPo cLOGOPx(o) #define cPMOPo cPMOPx(o) #define cSVOPo cSVOPx(o) #define cPADOPo cPADOPx(o) #define cPVOPo cPVOPx(o) #define cCOPo cCOPx(o) #define cLOOPo cLOOPx(o) #define kUNOP cUNOPx(kid) #define kBINOP cBINOPx(kid) #define kLISTOP cLISTOPx(kid) #define kLOGOP cLOGOPx(kid) #define kPMOP cPMOPx(kid) #define kSVOP cSVOPx(kid) #define kPADOP cPADOPx(kid) #define kPVOP cPVOPx(kid) #define kCOP cCOPx(kid) #define kLOOP cLOOPx(kid) #ifdef USE_ITHREADS # define cGVOPx_gv(o) ((GV*)PAD_SVl(cPADOPx(o)->op_padix)) # define IS_PADGV(v) (v && SvTYPE(v) == SVt_PVGV && isGV_with_GP(v) \ && GvIN_PAD(v)) # define IS_PADCONST(v) \ (v && (SvREADONLY(v) || (SvIsCOW(v) && !SvLEN(v)))) # define cSVOPx_sv(v) (cSVOPx(v)->op_sv \ ? cSVOPx(v)->op_sv : PAD_SVl((v)->op_targ)) # define cSVOPx_svp(v) (cSVOPx(v)->op_sv \ ? &cSVOPx(v)->op_sv : &PAD_SVl((v)->op_targ)) #else # define cGVOPx_gv(o) ((GV*)cSVOPx(o)->op_sv) # define IS_PADGV(v) FALSE # define IS_PADCONST(v) FALSE # define cSVOPx_sv(v) (cSVOPx(v)->op_sv) # define cSVOPx_svp(v) (&cSVOPx(v)->op_sv) #endif #define cGVOP_gv cGVOPx_gv(PL_op) #define cGVOPo_gv cGVOPx_gv(o) #define kGVOP_gv cGVOPx_gv(kid) #define cSVOP_sv cSVOPx_sv(PL_op) #define cSVOPo_sv cSVOPx_sv(o) #define kSVOP_sv cSVOPx_sv(kid) #ifndef PERL_CORE # define Nullop ((OP*)NULL) #endif /* Lowest byte of PL_opargs */ #define OA_MARK 1 #define OA_FOLDCONST 2 #define OA_RETSCALAR 4 #define OA_TARGET 8 #define OA_TARGLEX 16 #define OA_OTHERINT 32 #define OA_DANGEROUS 64 #define OA_DEFGV 128 /* The next 4 bits encode op class information */ #define OCSHIFT 8 #define OA_CLASS_MASK (15 << OCSHIFT) #define OA_BASEOP (0 << OCSHIFT) #define OA_UNOP (1 << OCSHIFT) #define OA_BINOP (2 << OCSHIFT) #define OA_LOGOP (3 << OCSHIFT) #define OA_LISTOP (4 << OCSHIFT) #define OA_PMOP (5 << OCSHIFT) #define OA_SVOP (6 << OCSHIFT) #define OA_PADOP (7 << OCSHIFT) #define OA_PVOP_OR_SVOP (8 << OCSHIFT) #define OA_LOOP (9 << OCSHIFT) #define OA_COP (10 << OCSHIFT) #define OA_BASEOP_OR_UNOP (11 << OCSHIFT) #define OA_FILESTATOP (12 << OCSHIFT) #define OA_LOOPEXOP (13 << OCSHIFT) #define OASHIFT 12 /* Remaining nybbles of PL_opargs */ #define OA_SCALAR 1 #define OA_LIST 2 #define OA_AVREF 3 #define OA_HVREF 4 #define OA_CVREF 5 #define OA_FILEREF 6 #define OA_SCALARREF 7 #define OA_OPTIONAL 8 /* Op_REFCNT is a reference count at the head of each op tree: needed * since the tree is shared between threads, and between cloned closure * copies in the same thread. OP_REFCNT_LOCK/UNLOCK is used when modifying * this count. * The same mutex is used to protect the refcounts of the reg_trie_data * and reg_ac_data structures, which are shared between duplicated * regexes. */ #ifdef USE_ITHREADS # define OP_REFCNT_INIT MUTEX_INIT(&PL_op_mutex) # ifdef PERL_CORE # define OP_REFCNT_LOCK MUTEX_LOCK(&PL_op_mutex) # define OP_REFCNT_UNLOCK MUTEX_UNLOCK(&PL_op_mutex) # else # define OP_REFCNT_LOCK op_refcnt_lock() # define OP_REFCNT_UNLOCK op_refcnt_unlock() # endif # define OP_REFCNT_TERM MUTEX_DESTROY(&PL_op_mutex) #else # define OP_REFCNT_INIT NOOP # define OP_REFCNT_LOCK NOOP # define OP_REFCNT_UNLOCK NOOP # define OP_REFCNT_TERM NOOP #endif #define OpREFCNT_set(o,n) ((o)->op_targ = (n)) #ifdef PERL_DEBUG_READONLY_OPS # define OpREFCNT_inc(o) Perl_op_refcnt_inc(aTHX_ o) # define OpREFCNT_dec(o) Perl_op_refcnt_dec(aTHX_ o) #else # define OpREFCNT_inc(o) ((o) ? (++(o)->op_targ, (o)) : NULL) # define OpREFCNT_dec(o) (--(o)->op_targ) #endif /* flags used by Perl_load_module() */ #define PERL_LOADMOD_DENY 0x1 /* no Module */ #define PERL_LOADMOD_NOIMPORT 0x2 /* use Module () */ #define PERL_LOADMOD_IMPORT_OPS 0x4 /* use Module (...) */ #if defined(PERL_IN_PERLY_C) || defined(PERL_IN_OP_C) #define ref(o, type) doref(o, type, TRUE) #endif /* =head1 Optree Manipulation Functions =for apidoc Am|OP*|LINKLIST|OP *o Given the root of an optree, link the tree in execution order using the C pointers and return the first op executed. If this has already been done, it will not be redone, and C<< o->op_next >> will be returned. If C<< o->op_next >> is not already set, I should be at least an C. =cut */ #define LINKLIST(o) ((o)->op_next ? (o)->op_next : op_linklist((OP*)o)) /* no longer used anywhere in core */ #ifndef PERL_CORE #define cv_ckproto(cv, gv, p) \ cv_ckproto_len_flags((cv), (gv), (p), (p) ? strlen(p) : 0, 0) #endif #ifdef PERL_CORE # define my(o) my_attrs((o), NULL) #endif #ifdef USE_REENTRANT_API #include "reentr.h" #endif #define NewOp(m,var,c,type) \ (var = (type *) Perl_Slab_Alloc(aTHX_ c*sizeof(type))) #define NewOpSz(m,var,size) \ (var = (OP *) Perl_Slab_Alloc(aTHX_ size)) #define FreeOp(p) Perl_Slab_Free(aTHX_ p) /* * The per-CV op slabs consist of a header (the opslab struct) and a bunch * of space for allocating op slots, each of which consists of two pointers * followed by an op. The first pointer points to the next op slot. The * second points to the slab. At the end of the slab is a null pointer, * so that slot->opslot_next - slot can be used to determine the size * of the op. * * Each CV can have multiple slabs; opslab_next points to the next slab, to * form a chain. All bookkeeping is done on the first slab, which is where * all the op slots point. * * Freed ops are marked as freed and attached to the freed chain * via op_next pointers. * * When there is more than one slab, the second slab in the slab chain is * assumed to be the one with free space available. It is used when allo- * cating an op if there are no freed ops available or big enough. */ #ifdef PERL_CORE struct opslot { /* keep opslot_next first */ OPSLOT * opslot_next; /* next slot */ OPSLAB * opslot_slab; /* owner */ OP opslot_op; /* the op itself */ }; struct opslab { OPSLOT * opslab_first; /* first op in this slab */ OPSLAB * opslab_next; /* next slab */ OP * opslab_freed; /* chain of freed ops */ size_t opslab_refcnt; /* number of ops */ # ifdef PERL_DEBUG_READONLY_OPS U16 opslab_size; /* size of slab in pointers */ bool opslab_readonly; # endif OPSLOT opslab_slots; /* slots begin here */ }; # define OPSLOT_HEADER STRUCT_OFFSET(OPSLOT, opslot_op) # define OPSLOT_HEADER_P (OPSLOT_HEADER/sizeof(I32 *)) # define OpSLOT(o) (assert_(o->op_slabbed) \ (OPSLOT *)(((char *)o)-OPSLOT_HEADER)) # define OpSLAB(o) OpSLOT(o)->opslot_slab # define OpslabREFCNT_dec(slab) \ (((slab)->opslab_refcnt == 1) \ ? opslab_free_nopad(slab) \ : (void)--(slab)->opslab_refcnt) /* Variant that does not null out the pads */ # define OpslabREFCNT_dec_padok(slab) \ (((slab)->opslab_refcnt == 1) \ ? opslab_free(slab) \ : (void)--(slab)->opslab_refcnt) #endif struct block_hooks { U32 bhk_flags; void (*bhk_start) (pTHX_ int full); void (*bhk_pre_end) (pTHX_ OP **seq); void (*bhk_post_end) (pTHX_ OP **seq); void (*bhk_eval) (pTHX_ OP *const saveop); }; /* =head1 Compile-time scope hooks =for apidoc mx|U32|BhkFLAGS|BHK *hk Return the BHK's flags. =for apidoc mx|void *|BhkENTRY|BHK *hk|which Return an entry from the BHK structure. I is a preprocessor token indicating which entry to return. If the appropriate flag is not set this will return NULL. The type of the return value depends on which entry you ask for. =for apidoc Amx|void|BhkENTRY_set|BHK *hk|which|void *ptr Set an entry in the BHK structure, and set the flags to indicate it is valid. I is a preprocessing token indicating which entry to set. The type of I depends on the entry. =for apidoc Amx|void|BhkDISABLE|BHK *hk|which Temporarily disable an entry in this BHK structure, by clearing the appropriate flag. I is a preprocessor token indicating which entry to disable. =for apidoc Amx|void|BhkENABLE|BHK *hk|which Re-enable an entry in this BHK structure, by setting the appropriate flag. I is a preprocessor token indicating which entry to enable. This will assert (under -DDEBUGGING) if the entry doesn't contain a valid pointer. =for apidoc mx|void|CALL_BLOCK_HOOKS|which|arg Call all the registered block hooks for type I. I is a preprocessing token; the type of I depends on I. =cut */ #define BhkFLAGS(hk) ((hk)->bhk_flags) #define BHKf_bhk_start 0x01 #define BHKf_bhk_pre_end 0x02 #define BHKf_bhk_post_end 0x04 #define BHKf_bhk_eval 0x08 #define BhkENTRY(hk, which) \ ((BhkFLAGS(hk) & BHKf_ ## which) ? ((hk)->which) : NULL) #define BhkENABLE(hk, which) \ STMT_START { \ BhkFLAGS(hk) |= BHKf_ ## which; \ assert(BhkENTRY(hk, which)); \ } STMT_END #define BhkDISABLE(hk, which) \ STMT_START { \ BhkFLAGS(hk) &= ~(BHKf_ ## which); \ } STMT_END #define BhkENTRY_set(hk, which, ptr) \ STMT_START { \ (hk)->which = ptr; \ BhkENABLE(hk, which); \ } STMT_END #define CALL_BLOCK_HOOKS(which, arg) \ STMT_START { \ if (PL_blockhooks) { \ SSize_t i; \ for (i = av_len(PL_blockhooks); i >= 0; i--) { \ SV *sv = AvARRAY(PL_blockhooks)[i]; \ BHK *hk; \ \ assert(SvIOK(sv)); \ if (SvUOK(sv)) \ hk = INT2PTR(BHK *, SvUVX(sv)); \ else \ hk = INT2PTR(BHK *, SvIVX(sv)); \ \ if (BhkENTRY(hk, which)) \ BhkENTRY(hk, which)(aTHX_ arg); \ } \ } \ } STMT_END /* flags for rv2cv_op_cv */ #define RV2CVOPCV_MARK_EARLY 0x00000001 #define RV2CVOPCV_RETURN_NAME_GV 0x00000002 #define op_lvalue(op,t) Perl_op_lvalue_flags(aTHX_ op,t,0) /* flags for op_lvalue_flags */ #define OP_LVALUE_NO_CROAK 1 /* =head1 Custom Operators =for apidoc Am|U32|XopFLAGS|XOP *xop Return the XOP's flags. =for apidoc Am||XopENTRY|XOP *xop|which Return a member of the XOP structure. I is a cpp token indicating which entry to return. If the member is not set this will return a default value. The return type depends on I. =for apidoc Am|void|XopENTRY_set|XOP *xop|which|value Set a member of the XOP structure. I is a cpp token indicating which entry to set. See L for details about the available members and how they are used. =for apidoc Am|void|XopDISABLE|XOP *xop|which Temporarily disable a member of the XOP, by clearing the appropriate flag. =for apidoc Am|void|XopENABLE|XOP *xop|which Reenable a member of the XOP which has been disabled. =cut */ struct custom_op { U32 xop_flags; const char *xop_name; const char *xop_desc; U32 xop_class; void (*xop_peep)(pTHX_ OP *o, OP *oldop); }; #define XopFLAGS(xop) ((xop)->xop_flags) #define XOPf_xop_name 0x01 #define XOPf_xop_desc 0x02 #define XOPf_xop_class 0x04 #define XOPf_xop_peep 0x08 #define XOPd_xop_name PL_op_name[OP_CUSTOM] #define XOPd_xop_desc PL_op_desc[OP_CUSTOM] #define XOPd_xop_class OA_BASEOP #define XOPd_xop_peep ((Perl_cpeep_t)0) #define XopENTRY_set(xop, which, to) \ STMT_START { \ (xop)->which = (to); \ (xop)->xop_flags |= XOPf_ ## which; \ } STMT_END #define XopENTRY(xop, which) \ ((XopFLAGS(xop) & XOPf_ ## which) ? (xop)->which : XOPd_ ## which) #define XopDISABLE(xop, which) ((xop)->xop_flags &= ~XOPf_ ## which) #define XopENABLE(xop, which) \ STMT_START { \ (xop)->xop_flags |= XOPf_ ## which; \ assert(XopENTRY(xop, which)); \ } STMT_END /* =head1 Optree Manipulation Functions =for apidoc Am|const char *|OP_NAME|OP *o Return the name of the provided OP. For core ops this looks up the name from the op_type; for custom ops from the op_ppaddr. =for apidoc Am|const char *|OP_DESC|OP *o Return a short description of the provided OP. =for apidoc Am|U32|OP_CLASS|OP *o Return the class of the provided OP: that is, which of the *OP structures it uses. For core ops this currently gets the information out of PL_opargs, which does not always accurately reflect the type used. For custom ops the type is returned from the registration, and it is up to the registree to ensure it is accurate. The value returned will be one of the OA_* constants from op.h. =cut */ #define OP_NAME(o) ((o)->op_type == OP_CUSTOM \ ? XopENTRY(Perl_custom_op_xop(aTHX_ o), xop_name) \ : PL_op_name[(o)->op_type]) #define OP_DESC(o) ((o)->op_type == OP_CUSTOM \ ? XopENTRY(Perl_custom_op_xop(aTHX_ o), xop_desc) \ : PL_op_desc[(o)->op_type]) #define OP_CLASS(o) ((o)->op_type == OP_CUSTOM \ ? XopENTRY(Perl_custom_op_xop(aTHX_ o), xop_class) \ : (PL_opargs[(o)->op_type] & OA_CLASS_MASK)) #define newSUB(f, o, p, b) Perl_newATTRSUB(aTHX_ (f), (o), (p), NULL, (b)) #ifdef PERL_MAD # define MAD_NULL 1 # define MAD_PV 2 # define MAD_OP 3 # define MAD_SV 4 struct madprop { MADPROP* mad_next; void *mad_val; U32 mad_vlen; /* short mad_count; */ char mad_key; char mad_type; }; struct token { I32 tk_type; YYSTYPE tk_lval; MADPROP* tk_mad; }; #endif /* * Values that can be held by mad_key : * ^ unfilled head spot * , literal , * ; literal ; (blank if implicit ; at end of block) * : literal : from ?: or attr list * + unary + * ? literal ? from ?: * ( literal ( * ) literal ) * [ literal [ * ] literal ] * { literal { * } literal } * @ literal @ sigil * $ literal $ sigil * * literal * sigil * ! use is source filtered * & & or sub * # whitespace/comment following ; or } * # $# sigil * 1 1st ; from for(;;) * 1 retired protasis * 2 2nd ; from for(;;) * 2 retired apodosis * 3 C-style for list * a sub or var attributes * a non-method arrow operator * A method arrow operator * A use import args * b format block * B retired stub block * C constant conditional op * d declarator * D do block * e unreached "else" (see C) * e expression producing E * E tr/E/R/, /E/ * f folded constant op * F peg op for format * g op was forced to be a word * i if/unless modifier * I if/elsif/unless statement * k local declarator * K retired kid op * l last index of array ($#foo) * L label * m modifier on regex * n sub or format name * o current operator/declarator name * o else/continue * O generic optimized op * p peg to hold extra whitespace at statement level * P peg op for package declaration * q opening quote * = quoted material * Q closing quote * Q optimized qw// * r expression producing R * R tr/E/R/ s/E/R/ * s sub signature * S use import stub (no import) * S retired sort block * t unreached "then" (see C) * U use import op * v private sv of for loop * V use version * w while/until modifier * W while/for statement * x optimized qw * X random thing * _ whitespace/comments preceding anything else * ~ =~ operator */ /* =head1 Hook manipulation */ #ifdef USE_ITHREADS # define OP_CHECK_MUTEX_INIT MUTEX_INIT(&PL_check_mutex) # define OP_CHECK_MUTEX_LOCK MUTEX_LOCK(&PL_check_mutex) # define OP_CHECK_MUTEX_UNLOCK MUTEX_UNLOCK(&PL_check_mutex) # define OP_CHECK_MUTEX_TERM MUTEX_DESTROY(&PL_check_mutex) #else # define OP_CHECK_MUTEX_INIT NOOP # define OP_CHECK_MUTEX_LOCK NOOP # define OP_CHECK_MUTEX_UNLOCK NOOP # define OP_CHECK_MUTEX_TERM NOOP #endif /* * Local variables: * c-indentation-style: bsd * c-basic-offset: 4 * indent-tabs-mode: nil * End: * * ex: set ts=8 sts=4 sw=4 et: */