From ecde9bf0b063dc94d08b46396600e0545440c837 Mon Sep 17 00:00:00 2001 From: Simon Cozens Date: Fri, 4 Aug 2000 06:21:04 +0000 Subject: New perlcc, take 2 Message-ID: p4raw-id: //depot/perl@6523 --- utils/perlcc.PL | 1325 ++++++++++++++++--------------------------------------- 1 file changed, 384 insertions(+), 941 deletions(-) (limited to 'utils') diff --git a/utils/perlcc.PL b/utils/perlcc.PL index f0636f62bd..0215c8daa6 100644 --- a/utils/perlcc.PL +++ b/utils/perlcc.PL @@ -31,836 +31,443 @@ print OUT <<"!GROK!THIS!"; $Config{startperl} eval 'exec $Config{perlpath} -S \$0 \${1+"\$@"}' if \$running_under_some_shell; +--\$running_under_some_shell; !GROK!THIS! # In the following, perl variables are not expanded during extraction. print OUT <<'!NO!SUBS!'; -use Config; +# Version 2.0, Simon Cozens, Thu Mar 30 17:52:45 JST 2000 +# Version 2.01, Tom Christiansen, Thu Mar 30 08:25:14 MST 2000 +# Version 2.02, Simon Cozens, Sun Apr 16 01:53:36 JST 2000 + use strict; -use FileHandle; -use File::Basename qw(&basename &dirname); -use Cwd; +use warnings; +use v5.6.0; -use Getopt::Long; +use Config; +use Fcntl qw(:DEFAULT :flock); +use File::Temp qw(tempfile); +use Cwd; +our $VERSION = 2.02; +$| = 1; -$Getopt::Long::bundling_override = 1; -$Getopt::Long::passthrough = 0; -$Getopt::Long::ignore_case = 0; +use subs qw{ + cc_harness check_read check_write checkopts_byte choose_backend + compile_byte compile_cstyle compile_module generate_code + grab_stash parse_argv sanity_check vprint yclept spawnit +}; +sub opt(*); # imal quoting -my $pathsep = ($Config{'osname'} eq 'MSWin32')? "\\" : "/"; # MAJOR HACK. SHOULD - # BE IN Config.pm +our ($Options, $BinPerl, $Backend); +our ($Input => $Output); -my $options = {}; -my $_fh; -unshift @ARGV, split ' ', $ENV{PERLCC_OPTS} if $ENV{PERLCC_OPTS}; +# eval { main(); 1 } or die; main(); -sub main -{ - - GetOptions - ( - $options, "L:s", - "I:s", - "C:s", - "o:s", - "e:s", - "regex:s", - "verbose:s", - "log:s", - "argv:s", - "b", - "opt", - "gen", - "sav", - "run", - "prog", - "mod" - ); - - - my $key; - - local($") = "|"; - - _usage() if (!_checkopts()); - push(@ARGV, _maketempfile()) if ($options->{'e'}); - - _usage() if (!@ARGV); - - my $file; - foreach $file (@ARGV) - { - _print(" --------------------------------------------------------------------------------- -Compiling $file: --------------------------------------------------------------------------------- -", 36 ); - _doit($file); - } +sub main { + parse_argv(); + check_write($Output); + choose_backend(); + generate_code(); + die "XXX: Not reached?"; + exit(0); } - -sub _doit -{ - my ($file) = @_; - - my ($program_ext, $module_ext) = _getRegexps(); - my ($obj, $objfile, $so, $type, $backend, $gentype); - - $backend = $options->{'b'} ? 'Bytecode' : $options->{'opt'} ? 'CC' : 'C'; - $gentype = $options->{'b'} ? 'Bytecode' : 'C'; +####################################################################### - if ( - (($file =~ m"@$program_ext") && ($file !~ m"@$module_ext")) - || (defined($options->{'prog'}) || defined($options->{'run'})) - ) - { - $type = 'program'; - - if ($options->{'b'}) - { - $obj = $objfile = $options->{'o'} ? $options->{'o'} : "${file}c"; - } - else - { - $objfile = $options->{'C'} ? $options->{'C'} : "$file.c"; - $obj = $options->{'o'} ? $options->{'o'} - : _getExecutable( $file,$program_ext); - } - - return() if (!$obj); - - } - elsif (($file =~ m"@$module_ext") || ($options->{'mod'})) - { - $type = 'module'; - - if ($options->{'b'}) - { - $obj = $objfile = $options->{'o'} ? $options->{'o'} : "${file}c"; - } - else - { - die "Shared objects are not supported on Win32 yet!!!!\n" - if ($Config{'osname'} eq 'MSWin32'); - - $objfile = $options->{'C'} ? $options->{'C'} : "$file.c"; - $obj = $options->{'o'} ? $options->{'o'} - : _getExecutable($file, $module_ext); - $so = "$obj.$Config{so}"; - } - - return() if (!$obj); +sub choose_backend { + # Choose the backend. + $Backend = 'C'; + if (opt(B)) { + checkopts_byte(); + $Backend = 'Bytecode'; } - else - { - _error("noextension", $file, $program_ext, $module_ext); - return(); + if (opt(S) && opt(c)) { + # die "$0: Do you want me to compile this or not?\n"; + delete $Options->{S}; } - - if ($type eq 'program') - { - _print("Making $gentype($objfile) for $file!\n", 36 ); - - my $errcode = _createCode($backend, $objfile, $file); - (_print( "ERROR: In generating code for $file!\n", -1), return()) - if ($errcode); - - _print("Compiling C($obj) for $file!\n", 36 ) if (!$options->{'gen'} && - !$options->{'b'}); - $errcode = _compileCode($file, $objfile, $obj) - if (!$options->{'gen'} && - !$options->{'b'}); - - if ($errcode) - { - _print( "ERROR: In compiling code for $objfile !\n", -1); - my $ofile = File::Basename::basename($objfile); - $ofile =~ s"\.c$"\.o"s; - - _removeCode("$ofile"); - return() - } - - _runCode($objfile) if ($options->{'run'} && $options->{'b'}); - _runCode($obj) if ($options->{'run'} && !$options->{'b'}); - - _removeCode($objfile) if (($options->{'b'} && - ($options->{'e'} && !$options->{'o'})) || - (!$options->{'b'} && - (!$options->{'sav'} || - ($options->{'e'} && !$options->{'C'})))); - - _removeCode($file) if ($options->{'e'}); - - _removeCode($obj) if (!$options->{'b'} && - (($options->{'e'} && - !$options->{'sav'} && !$options->{'o'}) || - ($options->{'run'} && !$options->{'sav'}))); - } - else - { - _print( "Making $gentype($objfile) for $file!\n", 36 ); - my $errcode = _createCode($backend, $objfile, $file, $obj); - (_print( "ERROR: In generating code for $file!\n", -1), return()) - if ($errcode); - - _print( "Compiling C($so) for $file!\n", 36 ) if (!$options->{'gen'} && - !$options->{'b'}); - - $errcode = - _compileCode($file, $objfile, $obj, $so ) if (!$options->{'gen'} && - !$options->{'b'}); - - (_print( "ERROR: In compiling code for $objfile!\n", -1), return()) - if ($errcode); - } -} - -sub _getExecutable -{ - my ($sourceprog, $ext) = @_; - my ($obj); - - if (defined($options->{'regex'})) - { - eval("(\$obj = \$sourceprog) =~ $options->{'regex'}"); - return(0) if (_error('badeval', $@)); - return(0) if (_error('equal', $obj, $sourceprog)); - } - elsif (defined ($options->{'ext'})) - { - ($obj = $sourceprog) =~ s"@$ext"$options->{ext}"g; - return(0) if (_error('equal', $obj, $sourceprog)); - } - elsif (defined ($options->{'run'})) - { - $obj = "perlc$$"; - } - else - { - ($obj = $sourceprog) =~ s"@$ext""g; - return(0) if (_error('equal', $obj, $sourceprog)); - } - return($obj); + $Backend = 'CC' if opt(O); } -sub _createCode -{ - my ( $backend, $generated_file, $file, $final_output ) = @_; - my $return; - my $output_switch = "o"; - my $max_line_len = ''; - - local($") = " -I"; - if ($^O eq 'MSWin32' && $backend =~ /^CC?$/ && $Config{cc} =~ /^cl/i) { - $max_line_len = '-l2000,'; - } - - if ($backend eq "Bytecode") - { - require ByteLoader; - - open(GENFILE, "> $generated_file") || die "Can't open $generated_file: $!"; - binmode GENFILE; - print GENFILE "#!$^X\n" if @_ == 3; - print GENFILE "use ByteLoader $ByteLoader::VERSION;\n"; - close(GENFILE); +sub generate_code { - $output_switch ="a"; - } + vprint 0, "Compiling $Input"; - if (@_ == 3) # compiling a program - { - chmod $generated_file, 0777 & ~umask if $backend eq "Bytecode"; - my $null=File::Spec->devnull; - _print( "$^X -I@INC -MB::Stash -c $file\n", 36); - my @stash=`$^X -I@INC -MB::Stash -c $file 2>$null`; - my $stash=$stash[-1]; - chomp $stash; - - _print( "$^X -I@INC -MO=$backend,$max_line_len$stash $file\n", 36); - $return = _run("$^X -I@INC -MO=$backend,$max_line_len$stash,-$output_switch$generated_file $file", 9); - $return; - } - else # compiling a shared object - { - _print( - "$^X -I@INC -MO=$backend,$max_line_len-m$final_output $file\n", 36); - $return = - _run("$^X -I@INC -MO=$backend,$max_line_len-m$final_output,-$output_switch$generated_file $file ", 9); - $return; - } -} + $BinPerl = yclept(); # Calling convention for perl. -sub _compileCode -{ - my ($sourceprog, $generated_cfile, $output_executable, $shared_object) = @_; - my @return; - - if (@_ == 3) # just compiling a program - { - $return[0] = - _ccharness('static', $sourceprog, "-o", $output_executable, - $generated_cfile); - $return[0]; - } - else - { - my $object_file = $generated_cfile; - $object_file =~ s"\.c$"$Config{_o}"; - - $return[0] = _ccharness('compile', $sourceprog, "-c", $generated_cfile); - $return[1] = _ccharness - ( - 'dynamic', - $sourceprog, "-o", - $shared_object, $object_file - ); - return(1) if (grep ($_, @return)); - return(0); + if (opt(shared)) { + compile_module(); + } else { + if ($Backend eq 'Bytecode') { + compile_byte(); + } else { + compile_cstyle(); + } } -} -sub _runCode -{ - my ($executable) = @_; - _print("$executable $options->{'argv'}\n", 36); - _run("$executable $options->{'argv'}", -1 ); } -sub _removeCode -{ - my ($file) = @_; - unlink($file) if (-e $file); -} - -sub _ccharness -{ - my $type = shift; - my (@args) = @_; - local($") = " "; - - my $sourceprog = shift(@args); - my ($libdir, $incdir); - - my $L = '-L'; - $L = '-libpath:' if $^O eq 'MSWin32' && $Config{cc} =~ /^cl/i; - - if (-d "$Config{installarchlib}/CORE") - { - $libdir = "$L$Config{installarchlib}/CORE"; - $incdir = "-I$Config{installarchlib}/CORE"; - } - else - { - $libdir = "$L.. $L."; - $incdir = "-I.. -I."; +# usage: vprint [level] msg args +sub vprint { + my $level; + if (@_ == 1) { + $level = 1; + } elsif ($_[0] =~ /^\d$/) { + $level = shift; + } else { + # well, they forgot to use a number; means >0 + $level = 0; + } + my $msg = "@_"; + $msg .= "\n" unless substr($msg, -1) eq "\n"; + print "$0: $msg" if opt(v) > $level; +} + +sub parse_argv { + + use Getopt::Long; + Getopt::Long::Configure("bundling"); + Getopt::Long::Configure("no_ignore_case"); + + # no difference in exists and defined for %ENV; also, a "0" + # argument or a "" would not help cc, so skip + unshift @ARGV, split ' ', $ENV{PERLCC_OPTS} if $ENV{PERLCC_OPTS}; + + $Options = {}; + Getopt::Long::GetOptions( $Options, + 'L:s', # lib directory + 'I:s', # include directories (FOR C, NOT FOR PERL) + 'o:s', # Output executable + 'v+', # Verbosity level + 'e:s', # One-liner + 'B', # Byte compiler backend + 'O', # Optimised C backend + 'c', # Compile only + 'h', # Help me + 'S', # Dump C files + 's:s', # Dirty hack to enable -shared/-static + 'shared', # Create a shared library (--shared for compat.) + ); + + # This is an attempt to make perlcc's arg. handling look like cc. + if ( opt('s') ) { # must quote: looks like s)foo)bar)! + if (opt('s') eq 'hared') { + $Options->{shared}++; + } elsif (opt('s') eq 'tatic') { + $Options->{static}++; + } else { + warn "$0: Unknown option -s", opt('s'); + } } - $libdir .= " $L$options->{L}" if (defined($options->{L})); - $incdir .= " -I$options->{L}" if (defined($options->{L})); - - my $linkargs = ''; - my $dynaloader = ''; - my $optimize = ''; - my $flags = ''; + $Options->{v} += 0; - if (!grep(/^-[cS]$/, @args)) - { - my $lperl = $^O eq 'os2' ? '-llibperl' - : $^O eq 'MSWin32' ? "$Config{archlibexp}\\CORE\\$Config{libperl}" - : '-lperl'; - ($lperl = $Config{libperl}) =~ s/lib(.*)\Q$Config{_a}\E/-l$1/ - if($^O eq 'cygwin'); + helpme() if opt(h); # And exit - $optimize = $Config{'optimize'} =~ /-O\d/ ? '' : $Config{'optimize'}; + $Output = opt(o) || 'a.out'; - $flags = $type eq 'dynamic' ? $Config{lddlflags} : $Config{ldflags}; - $linkargs = "$flags $libdir $lperl @Config{libs}"; - $linkargs = "/link $linkargs" if $^O eq 'MSWin32' && $Config{cc} =~ /^cl/i; + if (opt(e)) { + warn "$0: using -e 'code' as input file, ignoring @ARGV\n" if @ARGV; + # We don't use a temporary file here; why bother? + # XXX: this is not bullet proof -- spaces or quotes in name! + $Input = "-e '".opt(e)."'"; # Quotes eaten by shell + } else { + $Input = shift @ARGV; # XXX: more files? + die "$0: No input file specified\n" unless $Input; + # DWIM modules. This is bad but necessary. + $Options->{shared}++ if $Input =~ /\.pm\z/; + warn "$0: using $Input as input file, ignoring @ARGV\n" if @ARGV; + check_read($Input); + check_perl($Input); + sanity_check(); } - my $libs = _getSharedObjects($sourceprog); - @$libs = grep { !(/DynaLoader\.a$/ && ($dynaloader = $_)) } @$libs - if($^O eq 'cygwin'); - - my $args = "@args"; - if ($^O eq 'MSWin32' && $Config{cc} =~ /^bcc/i) { - # BC++ cmd line syntax does not allow space between -[oexz...] and arg - $args =~ s/(^|\s+)-([oe])\s+/$1-$2/g; - } +} - my $ccflags = $Config{ccflags}; - $ccflags .= ' -DUSEIMPORTLIB' if $^O eq 'cygwin'; - my $cccmd = "$Config{cc} $ccflags $optimize $incdir " - ."$args $dynaloader $linkargs @$libs"; +sub opt(*) { + my $opt = shift; + return exists($Options->{$opt}) && ($Options->{$opt} || 0); +} - _print ("$cccmd\n", 36); - _run("$cccmd", 18 ); +sub compile_module { + die "$0: Compiling to shared libraries is currently disabled\n"; } -sub _getSharedObjects -{ - my ($sourceprog) = @_; - my ($tmpfile, $incfile); - my (@sharedobjects, @libraries); - local($") = " -I"; +sub compile_byte { + require ByteLoader; + my $stash = grab_stash(); + my $command = "$BinPerl -MO=Bytecode,$stash $Input"; + # The -a option means we'd have to close the file and lose the + # lock, which would create the tiniest of races. Instead, append + # the output ourselves. + vprint 1, "Writing on $Output"; - my ($tmpprog); - ($tmpprog = $sourceprog) =~ s"(.*)[\\/](.*)"$2"; + my $openflags = O_WRONLY | O_CREAT; + $openflags |= O_BINARY if eval { O_BINARY; 1 }; + $openflags |= O_EXLOCK if eval { O_EXLOCK; 1 }; - my $tempdir= File::Spec->tmpdir; + # these dies are not "$0: .... \n" because they "can't happen" - $tmpfile = "$tempdir/$tmpprog.tst"; - $incfile = "$tempdir/$tmpprog.val"; + sysopen(OUT, $Output, $openflags) + or die "can't write to $Output: $!"; - my $fd = new FileHandle("> $tmpfile") || die "Couldn't open $tmpfile!\n"; - my $fd2 = - new FileHandle("$sourceprog") || die "Couldn't open $sourceprog!\n"; + # this is blocking; hold on; why are we doing this?? + # flock OUT, LOCK_EX or die "can't lock $Output: $!" + # unless eval { O_EXLOCK; 1 }; - print $fd <<"EOF"; - use FileHandle; - my \$fh3 = new FileHandle("> $incfile") - || die "Couldn't open $incfile\\n"; + truncate(OUT, 0) + or die "couldn't trunc $Output: $!"; - my \$key; - foreach \$key (keys(\%INC)) { print \$fh3 "\$key:\$INC{\$key}\\n"; } - close(\$fh3); - exit(); + print OUT < ); - close($fd); - - _print("$^X -I@INC $tmpfile\n", 36); - _run("$^X -I@INC $tmpfile", 9 ); - - $fd = new FileHandle ("$incfile"); - my @lines = <$fd>; - - unlink($tmpfile); - unlink($incfile); + # Now the compile: + vprint 1, "Compiling..."; + vprint 3, "Calling $command"; - my $line; - my $autolib; + my ($output_r, $error_r) = spawnit($command); + my @output = @$output_r; + my @error = @$error_r; - my @return; - - foreach $line (@lines) - { - chomp($line); - - my ($modname, $modpath) = split(':', $line); - my ($dir, $file) = ($modpath=~ m"(.*)[\\/]($modname)"); - - if ($autolib = _lookforAuto($dir, $file)) { push(@return, $autolib); } + if (@error && $? != 0) { + die "$0: $Input did not compile, which can't happen:\n@error\n"; } - return(\@return); -} - -sub _maketempfile -{ - my $return; -# if ($Config{'osname'} eq 'MSWin32') -# { $return = "C:\\TEMP\\comp$$.p"; } -# else -# { $return = "/tmp/comp$$.p"; } + # Write it and leave. + print OUT @output or die "can't write $Output: $!"; + close OUT or die "can't close $Output: $!"; - $return = "comp$$.p"; - - my $fd = new FileHandle( "> $return") || die "Couldn't open $return!\n"; - print $fd $options->{'e'}; - close($fd); - - return($return); + # wait, how could it be anything but what you see next? + chmod 0777 & ~umask, $Output or die "can't chmod $Output: $!"; + exit 0; } - - -sub _lookforAuto -{ - my ($dir, $file) = @_; - - my ($relabs, $relshared); - my ($prefix); - my $return; - my $sharedextension = $^O =~ /MSWin32|cygwin|os2/i - ? $Config{_a} : ".$Config{so}"; - ($prefix = $file) =~ s"(.*)\.pm"$1"; - my ($tmp, $modname) = ($prefix =~ m"(?:(.*)[\\/]){0,1}(.*)"s); - - $relshared = "$pathsep$prefix$pathsep$modname$sharedextension"; - $relabs = "$pathsep$prefix$pathsep$modname$Config{_a}"; - # HACK . WHY DOES _a HAVE A '.' - # AND so HAVE NONE?? - - my @searchpaths = map("$_${pathsep}auto", @INC); +sub compile_cstyle { + my $stash = grab_stash(); - my $path; - foreach $path (@searchpaths) - { - if (-e ($return = "$path$relshared")) { return($return); } - if (-e ($return = "$path$relabs")) { return($return); } + # What are we going to call our output C file? + my ($cfile,$cfh); + my $lose = 0; + if (opt(S) || opt(c)) { + # We need to keep it. + if (opt(e)) { + $cfile = "a.out.c"; + } else { + $cfile = $Input; + # File off extension if present + # hold on: plx is executable; also, careful of ordering! + $cfile =~ s/\.(?:p(?:lx|l|h)|m)\z//i; + $cfile .= ".c"; + $cfile = $Output if opt(c) && $Output =~ /\.c\z/i; + } + check_write($cfile); + } else { + # Don't need to keep it, be safe with a tempfile. + $lose = 1; + ($cfh, $cfile) = tempfile("pccXXXXX", SUFFIX => ".c"); + close $cfh; # See comment just below } - return(undef); -} - -sub _getRegexps # make the appropriate regexps for making executables, -{ # shared libs - - my ($program_ext, $module_ext) = ([],[]); + vprint 1, "Writing C on $cfile"; + my $max_line_len = ''; + if ($^O eq 'MSWin32' && $Config{cc} =~ /^cl/i) { + $max_line_len = '-l2000,'; + } - @$program_ext = ($ENV{PERL_SCRIPT_EXT})? split(':', $ENV{PERL_SCRIPT_EXT}) : - ('.p$', '.pl$', '.bat$'); + # This has to do the write itself, so we can't keep a lock. Life + # sucks. + my $command = "$BinPerl -MO=$Backend,$max_line_len$stash,-o$cfile $Input"; + vprint 1, "Compiling..."; + vprint 1, "Calling $command"; + my ($output_r, $error_r) = spawnit($command); + my @output = @$output_r; + my @error = @$error_r; - @$module_ext = ($ENV{PERL_MODULE_EXT})? split(':', $ENV{PERL_MODULE_EXT}) : - ('.pm$'); + if (@error && $? != 0) { + die "$0: $Input did not compile, which can't happen:\n@error\n"; + } - _mungeRegexp( $program_ext ); - _mungeRegexp( $module_ext ); + cc_harness($cfile,$stash) unless opt(c); - return($program_ext, $module_ext); + if ($lose) { + vprint 2, "unlinking $cfile"; + unlink $cfile or die "can't unlink $cfile: $!" if $lose; + } + exit(0); } -sub _mungeRegexp -{ - my ($regexp) = @_; - - grep(s:(^|[^\\])\.:$1\x00\\.:g, @$regexp); - grep(s:(^|[^\x00])\\\.:$1\.:g, @$regexp); - grep(s:\x00::g, @$regexp); +sub cc_harness { + my ($cfile,$stash)=@_; + use ExtUtils::Embed (); + my $command = ExtUtils::Embed::ccopts." -o $Output $cfile "; + $command .= join " -I", split /\s+/, opt(I); + $command .= join " -L", split /\s+/, opt(L); + my @mods = split /-?u /, $stash; + $command .= ExtUtils::Embed::ldopts("-std", \@mods); + vprint 3, "running cc $command"; + system("cc $command"); } -sub _error -{ - my ($type, @args) = @_; - - if ($type eq 'equal') - { - - if ($args[0] eq $args[1]) - { - _print ("ERROR: The object file '$args[0]' does not generate a legitimate executable file! Skipping!\n", -1); - return(1); +# Where Perl is, and which include path to give it. +sub yclept { + my $command = "$^X "; + + # DWIM the -I to be Perl, not C, include directories. + if (opt(I) && $Backend eq "Bytecode") { + for (split /\s+/, opt(I)) { + if (-d $_) { + push @INC, $_; + } else { + warn "$0: Include directory $_ not found, skipping\n"; + } } } - elsif ($type eq 'badeval') - { - if ($args[0]) - { - _print ("ERROR: $args[0]\n", -1); - return(1); - } - } - elsif ($type eq 'noextension') - { - my $progext = join(',', @{$args[1]}); - my $modext = join(',', @{$args[2]}); - - $progext =~ s"\\""g; - $modext =~ s"\\""g; - - $progext =~ s"\$""g; - $modext =~ s"\$""g; - - _print - ( -" -ERROR: '$args[0]' does not have a proper extension! Proper extensions are: - - PROGRAM: $progext - SHARED OBJECT: $modext - -Use the '-prog' flag to force your files to be interpreted as programs. -Use the '-mod' flag to force your files to be interpreted as modules. -", -1 - ); - return(1); - } - - return(0); + + $command .= "-I$_ " for @INC; + return $command; } -sub _checkopts +# Use B::Stash to find additional modules and stuff. { - my @errors; - local($") = "\n"; + my $_stash; + sub grab_stash { - if ($options->{'log'}) - { - $_fh = new FileHandle(">> $options->{'log'}") || push(@errors, "ERROR: Couldn't open $options->{'log'}\n"); - } + warn "already called get_stash once" if $_stash; - if ($options->{'b'} && $options->{'c'}) - { - push(@errors, -"ERROR: The '-b' and '-c' options are incompatible. The '-c' option specifies - a name for the intermediate C code but '-b' generates byte code - directly.\n"); - } - if ($options->{'b'} && ($options->{'sav'} || $options->{'gen'})) - { - push(@errors, -"ERROR: The '-sav' and '-gen' options are incompatible with the '-b' option. - They ask for intermediate C code to be saved by '-b' generates byte - code directly.\n"); - } + my $command = "$BinPerl -MB::Stash -c $Input"; + # Filename here is perfectly sanitised. + vprint 3, "Calling $command\n"; - if (($options->{'c'}) && (@ARGV > 1) && ($options->{'sav'} )) - { - push(@errors, -"ERROR: The '-sav' and '-C' options are incompatible when you have more than - one input file! ('-C' explicitly names resulting C code, '-sav' saves it, - and hence, with more than one file, the c code will be overwritten for - each file that you compile)\n"); - } - if (($options->{'o'}) && (@ARGV > 1)) - { - push(@errors, -"ERROR: The '-o' option is incompatible when you have more than one input - file! (-o explicitly names the resulting file, hence, with more than - one file the names clash)\n"); - } + my ($stash_r, $error_r) = spawnit($command); + my @stash = @$stash_r; + my @error = @$error_r; - if ($options->{'e'} && ($options->{'sav'} || $options->{'gen'}) && - !$options->{'C'}) - { - push(@errors, -"ERROR: You need to specify where you are going to save the resulting - C code when using '-sav' and '-e'. Use '-C'.\n"); - } + if (@error && $? != 0) { + die "$0: $Input did not compile:\n@error\n"; + } - if (($options->{'regex'} || $options->{'run'} || $options->{'o'}) - && $options->{'gen'}) - { - push(@errors, -"ERROR: The options '-regex', '-run', and '-o' are incompatible with '-gen'. - '-gen' says to stop at C generation, and the other three modify the - compilation and/or running process!\n"); + $stash[0] =~ s/,-u\//; + vprint 2, "Stash: ", join " ", split /,?-u/, $stash[0]; + chomp $stash[0]; + return $_stash = $stash[0]; } - if ($options->{'run'} && $options->{'mod'}) - { - push(@errors, -"ERROR: Can't run modules that you are compiling! '-run' and '-mod' are - incompatible!\n"); - } +} - if ($options->{'e'} && @ARGV) - { - push (@errors, -"ERROR: The option '-e' needs to be all by itself without any other - file arguments!\n"); - } - if ($options->{'e'} && !($options->{'o'} || $options->{'run'})) - { - $options->{'run'} = 1; - } +# Check the consistency of options if -B is selected. +# To wit, (-B|-O) ==> no -shared, no -S, no -c +sub checkopts_byte { - if (!defined($options->{'verbose'})) - { - $options->{'verbose'} = ($options->{'log'})? 64 : 7; - } + die "$0: Please choose one of either -B and -O.\n" if opt(O); - my $verbose_error; + if (opt(shared)) { + warn "$0: Will not create a shared library for bytecode\n"; + delete $Options->{shared}; + } - if ($options->{'verbose'} =~ m"[^tagfcd]" && - !( $options->{'verbose'} eq '0' || - ($options->{'verbose'} < 64 && $options->{'verbose'} > 0))) - { - $verbose_error = 1; - push(@errors, -"ERROR: Illegal verbosity level. Needs to have either the letters - 't','a','g','f','c', or 'd' in it or be between 0 and 63, inclusive.\n"); + for my $o ( qw[c S] ) { + if (opt($o)) { + warn "$0: Compiling to bytecode is a one-pass process--", + "-$o ignored\n"; + delete $Options->{$o}; + } } - $options->{'verbose'} = ($options->{'verbose'} =~ m"[tagfcd]")? - ($options->{'verbose'} =~ m"d") * 32 + - ($options->{'verbose'} =~ m"c") * 16 + - ($options->{'verbose'} =~ m"f") * 8 + - ($options->{'verbose'} =~ m"t") * 4 + - ($options->{'verbose'} =~ m"a") * 2 + - ($options->{'verbose'} =~ m"g") * 1 - : $options->{'verbose'}; - - if (!$verbose_error && ( $options->{'log'} && - !( - ($options->{'verbose'} & 8) || - ($options->{'verbose'} & 16) || - ($options->{'verbose'} & 32 ) - ) - ) - ) - { - push(@errors, -"ERROR: The verbosity level '$options->{'verbose'}' does not output anything - to a logfile, and you specified '-log'!\n"); - } # } - - if (!$verbose_error && ( !$options->{'log'} && - ( - ($options->{'verbose'} & 8) || - ($options->{'verbose'} & 16) || - ($options->{'verbose'} & 32) || - ($options->{'verbose'} & 64) - ) - ) - ) - { - push(@errors, -"ERROR: The verbosity level '$options->{'verbose'}' requires that you also - specify a logfile via '-log'\n"); - } # } - - - (_print( "\n". join("\n", @errors), -1), return(0)) if (@errors); - return(1); } -sub _print -{ - my ($text, $flag ) = @_; - - my $logflag = int($flag/8) * 8; - my $regflag = $flag % 8; - - if ($flag == -1 || ($flag & $options->{'verbose'})) - { - my $dolog = ((($logflag & $options->{'verbose'}) || $flag == -1) - && $options->{'log'}); - - my $doreg = (($regflag & $options->{'verbose'}) || $flag == -1); - - if ($doreg) { print( STDERR $text ); } - if ($dolog) { print $_fh $text; } +# Check the input and output files make sense, are read/writeable. +sub sanity_check { + if ($Input eq $Output) { + if ($Input eq 'a.out') { + warn "$0: Compiling a.out is probably not what you want to do.\n"; + # You fully deserve what you get now. + } else { + warn "$0: Will not write output on top of input file, ", + "compiling to a.out instead\n"; + $Output = "a.out"; + } } } -sub _run -{ - my ($command, $flag) = @_; - - my $logflag = ($flag != -1)? int($flag/8) * 8 : 0; - my $regflag = $flag % 8; - - if ($flag == -1 || ($flag & $options->{'verbose'})) - { - my $dolog = ($logflag & $options->{'verbose'} && $options->{'log'}); - my $doreg = (($regflag & $options->{'verbose'}) || $flag == -1); - - if ($doreg && !$dolog) - { - print _interruptrun("$command"); - } - elsif ($doreg && $dolog) - { - my $text = _interruptrun($command); - print $_fh $text; - print STDERR $text; - } - else - { - my $text = _interruptrun($command); - print $_fh $text; - } - } - else - { - _interruptrun($command); +sub check_read { + my $file = shift; + unless (-r $file) { + die "$0: Input file $file is a directory, not a file\n" if -d _; + unless (-e _) { + die "$0: Input file $file was not found\n"; + } else { + die "$0: Cannot read input file $file: $!\n"; + } } - return($?); + unless (-f _) { + # XXX: die? don't try this on /dev/tty + warn "$0: WARNING: input $file is not a plain file\n"; + } } -sub _interruptrun -{ - my ($command) = @_; - my $pid = open (FD, "$command |"); - - local($SIG{HUP}) = sub { -# kill 9, $pid + 1; -# HACK... 2>&1 doesn't propogate -# kill, comment out for quick and dirty -# process killing of child. - - kill 9, $pid; - exit(); - }; - local($SIG{INT}) = sub { -# kill 9, $pid + 1; -# HACK... 2>&1 doesn't propogate -# kill, comment out for quick and dirty -# process killing of child. - kill 9, $pid; - exit(); - }; - - my $needalarm = - ($ENV{'PERLCC_TIMEOUT'} && - $Config{'osname'} ne 'MSWin32' && $command =~ m"^perlc"); - my $text; - - eval - { - local($SIG{ALRM}) = sub { die "INFINITE LOOP"; }; - alarm($ENV{'PERLCC_TIMEOUT'}) if ($needalarm); - $text = join('', ); - alarm(0) if ($needalarm); - }; - - if ($@) - { - eval { kill 'HUP', $pid; }; - _print("SYSTEM TIMEOUT (infinite loop?)\n", 36); +sub check_write { + my $file = shift; + if (-d $file) { + die "$0: Cannot write on $file, is a directory\n"; + } + if (-e _) { + die "$0: Cannot write on $file: $!\n" unless -w _; + } + unless (-w cwd()) { + die "$0: Cannot write in this directory: $!\n" } - - close(FD); - return($text); } -sub _usage -{ - _print - ( - <<"EOF" - -Usage: $0 - -WARNING: The whole compiler suite ('perlcc' included) is considered VERY -experimental. Use for production purposes is strongly discouraged. - - Flags with arguments - -L < extra library dirs for installation (form of 'dir1:dir2') > - -I < extra include dirs for installation (form of 'dir1:dir2') > - -C < explicit name of resulting C code > - -o < explicit name of resulting executable > - -e < to compile 'one liners'. Need executable name (-o) or '-run'> - -regex < rename regex, -regex 's/\.p/\.exe/' compiles a.p to a.exe > - -verbose < verbose level < 1-63, or following letters 'gatfcd' > - -argv < arguments for the executables to be run via '-run' or '-e' > - - Boolean flags - -b ( to generate byte code ) - -opt ( to generated optimised C code. May not work in some cases. ) - -gen ( to just generate the C code. Implies '-sav' ) - -sav ( to save intermediate C code, (and executables with '-run')) - -run ( to run the compiled program on the fly, as were interpreted.) - -prog ( to indicate that the files on command line are programs ) - -mod ( to indicate that the files on command line are modules ) - -EOF -, -1 +sub check_perl { + my $file = shift; + unless (-T $file) { + warn "$0: Binary `$file' sure doesn't smell like perl source!\n"; + print "Checking file type... "; + system("file", $file); + die "Please try a perlier file!\n"; + } + + open(my $handle, "<", $file) or die "XXX: can't open $file: $!"; + local $_ = <$handle>; + if (/^#!/ && !/perl/) { + die "$0: $file is a ", /^#!\s*(\S+)/, " script, not perl\n"; + } + +} + +# File spawning and error collecting +sub spawnit { + my ($command) = shift; + my (@error,@output); + my $errname; + (undef, $errname) = tempfile("pccXXXXX"); + { + open (S_OUT, "$command 2>$errname |") + or die "$0: Couldn't spawn the compiler.\n"; + @output = ; + } + open (S_ERROR, $errname) or die "$0: Couldn't read the error file.\n"; + @error = ; + close S_ERROR; + close S_OUT; + unlink $errname or die "$0: Can't unlink error file $errname"; + return (\@output, \@error); +} - ); - exit(255); +sub helpme { + print "perlcc compiler frontend, version $VERSION\n\n"; + { no warnings; + exec "pod2usage $0"; + exec "perldoc $0"; + exec "pod2text $0"; + } } @@ -868,247 +475,83 @@ __END__ =head1 NAME -perlcc - frontend for perl compiler +perlcc - generate executables from Perl programs =head1 SYNOPSIS - %prompt perlcc a.p # compiles into executable 'a' - - %prompt perlcc A.pm # compile into 'A.so' - - %prompt perlcc a.p -o execute # compiles 'a.p' into 'execute'. - - %prompt perlcc a.p -o execute -run # compiles 'a.p' into execute, runs on - # the fly + $ perlcc hello # Compiles into executable 'a.out' + $ perlcc -o hello hello.pl # Compiles into executable 'hello' - %prompt perlcc a.p -o execute -run -argv 'arg1 arg2 arg3' - # compiles into execute, runs with - # arg1 arg2 arg3 as @ARGV + $ perlcc -O file # Compiles using the optimised C backend + $ perlcc -B file # Compiles using the bytecode backend - %prompt perlcc a.p b.p c.p -regex 's/\.p/\.exe' - # compiles into 'a.exe','b.exe','c.exe'. - - %prompt perlcc a.p -log compilelog # compiles into 'a', saves compilation - # info into compilelog, as well - # as mirroring to screen - - %prompt perlcc a.p -log compilelog -verbose cdf - # compiles into 'a', saves compilation - # info into compilelog, being silent - # on screen. - - %prompt perlcc a.p -C a.c -gen # generates C code (into a.c) and - # stops without compile. - - %prompt perlcc a.p -L ../lib a.c - # Compiles with the perl libraries - # inside ../lib included. + $ perlcc -c file # Creates a C file, 'file.c' + $ perlcc -S -o hello file # Creates a C file, 'file.c', + # then compiles it to executable 'hello' + $ perlcc -c out.c file # Creates a C file, 'out.c' from 'file' + $ perlcc -e 'print q//' # Compiles a one-liner into 'a.out' + $ perlcc -c -e 'print q//' # Creates a C file 'a.out.c' + =head1 DESCRIPTION -'perlcc' is the frontend into the perl compiler. Typing 'perlcc a.p' -compiles the code inside a.p into a standalone executable, and -perlcc A.pm will compile into a shared object, A.so, suitable for inclusion -into a perl program via "use A". +F creates standalone executables from Perl programs, using the +code generators provided by the L module. At present, you may +either create executable Perl bytecode, using the C<-B> option, or +generate and compile C files using the standard and 'optimised' C +backends. -There are quite a few flags to perlcc which help with such issues as compiling -programs in bulk, testing compiled programs for compatibility with the -interpreter, and controlling. +The code generated in this way is not guaranteed to work. The whole +codegen suite (C included) should be considered B +experimental. Use for production purposes is strongly discouraged. -=head1 OPTIONS +=head1 OPTIONS =over 4 -=item -L < library_directories > - -Adds directories in B to the compilation command. - -=item -I < include_directories > - -Adds directories inside B to the compilation command. - -=item -C < c_code_name > - -Explicitly gives the name B to the generated file containing -the C code which is to be compiled. Can only be used if compiling one file -on the command line. - -=item -o < executable_name > - -Explicitly gives the name B to the executable which is to be -compiled. Can only be used if compiling one file on the command line. +=item -LI -=item -e < perl_line_to_execute> +Adds the given directories to the library search path when C code is +passed to your C compiler. -Compiles 'one liners', in the same way that B runs text strings at -the command line. Default is to have the 'one liner' be compiled, and run all -in one go (see B<-run>); giving the B<-o> flag saves the resultant executable, -rather than throwing it away. Use '-argv' to pass arguments to the executable -created. +=item -II -=item -b +Adds the given directories to the include file search path when C code is +passed to your C compiler; when using the Perl bytecode option, adds the +given directories to Perl's include path. -Generates bytecode instead of C code. +=item -o I -=item -opt +Specifies the file name for the final compiled executable. -Uses the optimized C backend (C)rather than the simple C backend -(C). Beware that the optimized C backend creates very large -switch structures and structure initializations. Many C compilers -find it a challenge to compile the resulting output in finite amounts -of time. Many Perl features such as C are also not -supported by the optimized C backend. The simple C backend should -work in more instances, but can only offer modest speed increases. +=item -c I -=item -regex +Create C code only; do not compile to a standalone binary. -Gives a rule B - which is a legal perl regular expression - to -create executable file names. +=item -e I -=item -verbose +Compile a one-liner, much the same as C -Show exactly what steps perlcc is taking to compile your code. You can -change the verbosity level B much in the same way that -the C<-D> switch changes perl's debugging level, by giving either a -number which is the sum of bits you want or a list of letters -representing what you wish to see. Here are the verbosity levels so -far : +=item -S - Bit 1(g): Code Generation Errors to STDERR - Bit 2(a): Compilation Errors to STDERR - Bit 4(t): Descriptive text to STDERR - Bit 8(f): Code Generation Errors to file (B<-log> flag needed) - Bit 16(c): Compilation Errors to file (B<-log> flag needed) - Bit 32(d): Descriptive text to file (B<-log> flag needed) +Do not delete generated C code after compilation. -If the B<-log> tag is given, the default verbose level is 63 (ie: mirroring -all of perlcc's output to both the screen and to a log file). If no B<-log> -tag is given, then the default verbose level is 7 (ie: outputting all of -perlcc's output to STDERR). +=item -B -NOTE: Because of buffering concerns, you CANNOT shadow the output of '-run' to -both a file, and to the screen! Suggestions are welcome on how to overcome this -difficulty, but for now it simply does not work properly, and hence will only go -to the screen. +Use the Perl bytecode code generator. -=item -log +=item -O -Opens, for append, a logfile to save some or all of the text for a given -compile command. No rewrite version is available, so this needs to be done -manually. +Use the 'optimised' C code generator. This is more experimental than +everything else put together, and the code created is not guaranteed to +compile in finite time and memory, or indeed, at all. -=item -argv +=item -v -In combination with C<-run> or C<-e>, tells perlcc to run the resulting -executable with the string B as @ARGV. - -=item -sav - -Tells perl to save the intermediate C code. Usually, this C code is the name -of the perl code, plus '.c'; 'perlcode.p' gets generated in 'perlcode.p.c', -for example. If used with the C<-e> operator, you need to tell perlcc where to -save resulting executables. - -=item -gen - -Tells perlcc to only create the intermediate C code, and not compile the -results. Does an implicit B<-sav>, saving the C code rather than deleting it. - -=item -run - -Immediately run the perl code that has been generated. NOTE: IF YOU GIVE THE -B<-run> FLAG TO B, THEN THE REST OF @ARGV WILL BE INTERPRETED AS -ARGUMENTS TO THE PROGRAM THAT YOU ARE COMPILING. - -=item -prog - -Indicate that the programs at the command line are programs, and should be -compiled as such. B will automatically determine files to be -programs if they have B<.p>, B<.pl>, B<.bat> extensions. - -=item -mod - -Indicate that the programs at the command line are modules, and should be -compiled as such. B will automatically determine files to be -modules if they have the extension B<.pm>. +Increase verbosity of output; can be repeated for more verbose output. =back -=head1 ENVIRONMENT - -Most of the work of B is done at the command line. However, you can -change the heuristic which determines what is a module and what is a program. -As indicated above, B assumes that the extensions: - -.p$, .pl$, and .bat$ - -indicate a perl program, and: - -.pm$ - -indicate a library, for the purposes of creating executables. And furthermore, -by default, these extensions will be replaced (and dropped) in the process of -creating an executable. - -To change the extensions which are programs, and which are modules, set the -environmental variables: - -PERL_SCRIPT_EXT -PERL_MODULE_EXT - -These two environmental variables take colon-separated, legal perl regular -expressions, and are used by perlcc to decide which objects are which. -For example: - -setenv PERL_SCRIPT_EXT '.prl$:.perl$' -prompt% perlcc sample.perl - -will compile the script 'sample.perl' into the executable 'sample', and - -setenv PERL_MODULE_EXT '.perlmod$:.perlmodule$' - -prompt% perlcc sample.perlmod - -will compile the module 'sample.perlmod' into the shared object -'sample.so' - -NOTE: the '.' in the regular expressions for PERL_SCRIPT_EXT and PERL_MODULE_EXT -is a literal '.', and not a wild-card. To get a true wild-card, you need to -backslash the '.'; as in: - -setenv PERL_SCRIPT_EXT '\.\.\.\.\.' - -which would have the effect of compiling ANYTHING (except what is in -PERL_MODULE_EXT) into an executable with 5 less characters in its name. - -The PERLCC_OPTS environment variable can be set to the default flags -that must be used by the compiler. - -The PERLCC_TIMEOUT environment variable can be set to the number of -seconds to wait for the backends before giving up. This is sometimes -necessary to avoid some compilers taking forever to compile the -generated output. May not work on Windows and similar platforms. - -=head1 FILES - -'perlcc' uses a temporary file when you use the B<-e> option to evaluate -text and compile it. This temporary file is 'perlc$$.p'. The temporary C code is -perlc$$.p.c, and the temporary executable is perlc$$. - -When you use '-run' and don't save your executable, the temporary executable is -perlc$$ - -=head1 BUGS - -The whole compiler suite (C included) should be considered very -experimental. Use for production purposes is strongly discouraged. - -perlcc currently cannot compile shared objects on Win32. This should be fixed -in future. - -Bugs in the various compiler backends still exist, and are perhaps too -numerous to list here. - =cut !NO!SUBS! -- cgit v1.2.1