\input texinfo          @c -*-texinfo-*-
@c %**start of header
@setfilename nettle.info
@settitle Nettle: a low-level cryptographic library
@documentencoding UTF-8
@footnotestyle separate
@syncodeindex fn cp
@c %**end of header

@set UPDATED-FOR 2.6
@set AUTHOR Niels Möller

@copying
This manual is for the Nettle library (version @value{UPDATED-FOR}), a
low-level cryptographic library.

Originally written 2001 by @value{AUTHOR}, updated 2012.

@quotation
This manual is placed in the public domain. You may freely copy it, in
whole or in part, with or without modification. Attribution is
appreciated, but not required.
@end quotation
@end copying

@titlepage
@title Nettle Manual
@subtitle For the Nettle Library version @value{UPDATED-FOR}
@author @value{AUTHOR}
@page
@vskip 0pt plus 1filll
@insertcopying
@end titlepage

@dircategory Encryption
@direntry
* Nettle: (nettle).             A low-level cryptographic library.
@end direntry

@contents

@ifnottex
@node     Top, Introduction, (dir), (dir)
@comment  node-name,  next,  previous,  up
@top Nettle

This document describes the Nettle low-level cryptographic library. You
can use the library directly from your C programs, or write or use an
object-oriented wrapper for your favorite language or application.

@insertcopying

@menu
* Introduction::                What is Nettle?
* Copyright::                   Your rights.
* Conventions::                 General interface conventions.
* Example::                     An example program.
* Linking::                     Linking with the libnettle and libhogweed.
* Reference::                   All Nettle functions and features.
* Nettle soup::                 For the serious nettle hacker.
* Installation::                How to install Nettle.
* Index::                       Function and concept index.

@detailmenu
 --- The Detailed Node Listing ---

Reference

* Hash functions::              
* Cipher functions::            
* Cipher modes::                
* Keyed hash functions::        
* Key derivation functions::    
* Public-key algorithms::       
* Randomness::                  
* Ascii encoding::              
* Miscellaneous functions::     
* Compatibility functions::     

Cipher modes

* CBC::                         
* CTR::                         
* GCM::                         

Public-key algorithms

* RSA::                         The RSA public key algorithm.
* DSA::                         The DSA digital signature algorithm.

@end detailmenu
@end menu

@end ifnottex

@node Introduction, Copyright, Top, Top
@comment  node-name,  next,  previous,  up
@chapter Introduction

Nettle is a cryptographic library that is designed to fit easily in more
or less any context: In crypto toolkits for object-oriented languages
(C++, Python, Pike, ...), in applications like LSH or GNUPG, or even in
kernel space. In most contexts, you need more than the basic
cryptographic algorithms, you also need some way to keep track of available
algorithms, their properties and variants. You often have some algorithm
selection process, often dictated by a protocol you want to implement.

And as the requirements of applications differ in subtle and not so
subtle ways, an API that fits one application well can be a pain to use
in a different context. And that is why there are so many different
cryptographic libraries around.

Nettle tries to avoid this problem by doing one thing, the low-level
crypto stuff, and providing a @emph{simple} but general interface to it.
In particular, Nettle doesn't do algorithm selection. It doesn't do
memory allocation. It doesn't do any I/O.

The idea is that one can build several application and context specific
interfaces on top of Nettle, and share the code, test cases, benchmarks,
documentation, etc. Examples are the Nettle module for the Pike
language, and LSH, which both use an object-oriented abstraction on top
of the library.

This manual explains how to use the Nettle library. It also tries to
provide some background on the cryptography, and advice on how to best
put it to use.

@node Copyright, Conventions, Introduction, Top
@comment  node-name,  next,  previous,  up
@chapter Copyright

Nettle is distributed under the GNU Lesser General Public License
(LGPL), see the file COPYING.LIB for details. A few of the individual
files are in the public domain. To find the current status of particular
files, you have to read the copyright notices at the top of the files.

This manual is in the public domain. You may freely copy it in whole or
in part, e.g., into documentation of programs that build on Nettle.
Attribution, as well as contribution of improvements to the text, is of
course appreciated, but it is not required.

A list of the supported algorithms, their origins and licenses:

@table @emph
@item AES
The implementation of the AES cipher (also known as rijndael) is written
by Rafael Sevilla. Assembler for x86 by Rafael Sevilla and
@value{AUTHOR}, Sparc assembler by @value{AUTHOR}. Released under the
LGPL.

@item ARCFOUR
The implementation of the ARCFOUR (also known as RC4) cipher is written
by @value{AUTHOR}. Released under the LGPL.

@item ARCTWO
The implementation of the ARCTWO (also known as RC2) cipher is written
by Nikos Mavroyanopoulos and modified by Werner Koch and Simon
Josefsson. Released under the LGPL.

@item BLOWFISH
The implementation of the BLOWFISH cipher is written by Werner Koch,
copyright owned by the Free Software Foundation. Also hacked by Simon
Josefsson and Niels Möller. Released under the LGPL.

@item CAMELLIA
The C implementation is by Nippon Telegraph and Telephone Corporation
(NTT), heavily modified by @value{AUTHOR}. Assembler for x86 and x86_64
by @value{AUTHOR}. Released under the LGPL.

@item CAST128
The implementation of the CAST128 cipher is written by Steve Reid.
Released into the public domain.

@item DES
The implementation of the DES cipher is written by Dana L. How, and
released under the LGPL.

@item MD2
The implementation of MD2 is written by Andrew Kuchling, and hacked
some by Andreas Sigfridsson and @value{AUTHOR}. Python Cryptography
Toolkit license (essentially public domain).

@item MD4
This is almost the same code as for MD5 below, with modifications by
Marcus Comstedt. Released into the public domain.

@item MD5
The implementation of the MD5 message digest is written by Colin Plumb.
It has been hacked some more by Andrew Kuchling and @value{AUTHOR}.
Released into the public domain.

@item RIPMED160
The implementation of RIPEMD160 message digest is based on the code in
libgcrypt, copyright owned by the Free Software Foundation. Ported to
Nettle by Andres Mejia. Released under the LGPL.

@item SALSA20
The C implementation of SALSA20 is based on D. J. Bernstein's reference
implementation (in the public domain), adapted to Nettle by Simon
Josefsson, and heavily modified by Niels Möller. Assembly for x86_64 by
Niels Möller. Released under the LGPL.

@item PBKDF2
The C implementation of PBKDF2 is based on earlier work for Shishi and
GnuTLS by Simon Josefsson.  Released under the LGPL.

@item SERPENT
The implementation of the SERPENT cipher is based on the code in libgcrypt,
copyright owned by the Free Software Foundation. Adapted to Nettle by
Simon Josefsson and heavily modified by Niels Möller. Assembly for
x86_64 by Niels Möller. Released under the LGPL.

@item SHA1
The C implementation of the SHA1 message digest is written by Peter
Gutmann, and hacked some more by Andrew Kuchling and @value{AUTHOR}.
Released into the public domain. Assembler for x86 by @value{AUTHOR},
released under the LGPL.

@item SHA2
Written by @value{AUTHOR}, using Peter Gutmann's SHA1 code as a model. 
Released under the LGPL.

@item SHA3
Written by @value{AUTHOR}. Released under the LGPL.

@item GOSTHASH94
The C implementation of the GOST94 message digest is written by 
Aleksey Kravchenko and was ported from the rhash library by Nikos
Mavrogiannopoulos. It is released under the MIT license.

@item TWOFISH
The implementation of the TWOFISH cipher is written by Ruud de Rooij.
Released under the LGPL.

@item RSA
Written by @value{AUTHOR}, released under the LGPL. Uses the GMP library
for bignum operations.

@item DSA
Written by @value{AUTHOR}, released under the LGPL. Uses the GMP library
for bignum operations.
@end table

@node Conventions, Example, Copyright, Top
@comment  node-name,  next,  previous,  up
@chapter Conventions

For each supported algorithm, there is an include file that defines a
@emph{context struct}, a few constants, and declares functions for
operating on the context. The context struct encapsulates all information
needed by the algorithm, and it can be copied or moved in memory with no
unexpected effects.

For consistency, functions for different algorithms are very similar,
but there are some differences, for instance reflecting if the key setup
or encryption function differ for encryption and decryption, and whether
or not key setup can fail. There are also differences between algorithms
that don't show in function prototypes, but which the application must
nevertheless be aware of. There is no big difference between the
functions for stream ciphers and for block ciphers, although they should
be used quite differently by the application.

If your application uses more than one algorithm of the same type, you
should probably create an interface that is tailor-made for your needs,
and then write a few lines of glue code on top of Nettle.

By convention, for an algorithm named @code{foo}, the struct tag for the
context struct is @code{foo_ctx}, constants and functions uses prefixes
like @code{FOO_BLOCK_SIZE} (a constant) and @code{foo_set_key} (a
function).

In all functions, strings are represented with an explicit length, of
type @code{unsigned}, and a pointer of type @code{uint8_t *} or
@code{const uint8_t *}. For functions that transform one string to
another, the argument order is length, destination pointer and source
pointer. Source and destination areas are of the same length. Source and
destination may be the same, so that you can process strings in place,
but they @emph{must not} overlap in any other way.

Many of the functions lack return value and can never fail. Those
functions which can fail, return one on success and zero on failure.

@c FIXME: Say something about the name mangling.

@node Example, Linking, Conventions, Top
@comment  node-name,  next,  previous,  up
@chapter Example

A simple example program that reads a file from standard input and
writes its SHA1 checksum on standard output should give the flavor of
Nettle.

@example
@verbatiminclude sha-example.c
@end example

On a typical Unix system, this program can be compiled and linked with
the command line 
@example
gcc sha-example.c -o sha-example -lnettle
@end example

@node Linking, Reference, Example, Top
@comment  node-name,  next,  previous,  up
@chapter Linking

Nettle actually consists of two libraries, @file{libnettle} and
@file{libhogweed}. The @file{libhogweed} library contains those
functions of Nettle that uses bignum operations, and depends on the GMP
library. With this division, linking works the same for both static and
dynamic libraries.

If an application uses only the symmetric crypto algorithms of Nettle
(i.e., block ciphers, hash functions, and the like), it's sufficient to
link with @code{-lnettle}. If an application also uses public-key
algorithms, the recommended linker flags are @code{-lhogweed -lnettle
-lgmp}. If the involved libraries are installed as dynamic libraries, it
may be sufficient to link with just @code{-lhogweed}, and the loader
will resolve the dependencies automatically.

@node Reference, Nettle soup, Linking, Top
@comment  node-name,  next,  previous,  up
@chapter Reference

This chapter describes all the Nettle functions, grouped by family.

@menu
* Hash functions::              
* Cipher functions::            
* Cipher modes::                
* Keyed hash functions::        
* Key derivation functions::    
* Public-key algorithms::       
* Randomness::                  
* Ascii encoding::              
* Miscellaneous functions::     
* Compatibility functions::     
@end menu

@node Hash functions, Cipher functions, Reference, Reference
@comment  node-name,  next,  previous,  up

@section Hash functions
@cindex Hash function
A cryptographic @dfn{hash function} is a function that takes variable
size strings, and maps them to strings of fixed, short, length. There
are naturally lots of collisions, as there are more possible 1MB files
than 20 byte strings. But the function is constructed such that is hard
to find the collisions. More precisely, a cryptographic hash function
@code{H} should have the following properties:

@table @emph

@item One-way
@cindex One-way
Given a hash value @code{H(x)} it is hard to find a string @code{x}
that hashes to that value.

@item Collision-resistant
@cindex Collision-resistant
It is hard to find two different strings, @code{x} and @code{y}, such
that @code{H(x)} = @code{H(y)}.

@end table

Hash functions are useful as building blocks for digital signatures,
message authentication codes, pseudo random generators, association of
unique ids to documents, and many other things.

The most commonly used hash functions are MD5 and SHA1. Unfortunately,
both these fail the collision-resistance requirement; cryptologists have
found ways to construct colliding inputs. The recommended hash functions
for new applications are SHA2 (with main variants SHA256 and SHA512). At
the time of this writing (December 2012), the winner of the NIST SHA3
competition has recently been announced, and the new SHA3 (earlier known
as Keccak) and other top SHA3 candidates may also be reasonable
alternatives.

@menu
* Recommended hash functions::
* Legacy hash functions::
* nettle_hash abstraction::
@end menu

@node Recommended hash functions, Legacy hash functions,, Hash functions
@comment  node-name,  next,  previous,  up
@subsection Recommended hash functions

The following hash functions have no known weaknesses, and are suitable
for new applications. The SHA2 family of hash functions were specified
by @dfn{NIST}, intended as a replacement for @acronym{SHA1}.

@subsubsection @acronym{SHA256}

SHA256 is a member of the SHA2 family. It outputs hash values of 256
bits, or 32 octets. Nettle defines SHA256 in @file{<nettle/sha2.h>}.

@deftp {Context struct} {struct sha256_ctx}
@end deftp

@defvr Constant SHA256_DIGEST_SIZE
The size of a SHA256 digest, i.e. 32.
@end defvr

@defvr Constant SHA256_DATA_SIZE
The internal block size of SHA256. Useful for some special constructions,
in particular HMAC-SHA256.
@end defvr

@deftypefun void sha256_init (struct sha256_ctx *@var{ctx})
Initialize the SHA256 state.
@end deftypefun

@deftypefun void sha256_update (struct sha256_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void sha256_digest (struct sha256_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{SHA256_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{sha256_init}.
@end deftypefun

Earlier versions of nettle defined SHA256 in the header file
@file{<nettle/sha.h>}, which is now deprecated, but kept for
compatibility.

@subsubsection @acronym{SHA224}

SHA224 is a variant of SHA256, with a different initial state, and with
the output truncated to 224 bits, or 28 octets. Nettle defines SHA224 in
@file{<nettle/sha2.h>} (and in @file{<nettle/sha.h>}, for backwards
compatibility).

@deftp {Context struct} {struct sha224_ctx}
@end deftp

@defvr Constant SHA224_DIGEST_SIZE
The size of a SHA224 digest, i.e. 28.
@end defvr

@defvr Constant SHA224_DATA_SIZE
The internal block size of SHA224. Useful for some special constructions,
in particular HMAC-SHA224.
@end defvr

@deftypefun void sha224_init (struct sha224_ctx *@var{ctx})
Initialize the SHA224 state.
@end deftypefun

@deftypefun void sha224_update (struct sha224_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void sha224_digest (struct sha224_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{SHA224_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{sha224_init}.
@end deftypefun

@subsubsection @acronym{SHA512}

SHA512 is a larger sibling to SHA256, with a very similar structure but
with both the output and the internal variables of twice the size. The
internal variables are 64 bits rather than 32, making it significantly
slower on 32-bit computers. It outputs hash values of 512 bits, or 64
octets. Nettle defines SHA512 in @file{<nettle/sha2.h>} (and in
@file{<nettle/sha.h>}, for backwards compatibility).

@deftp {Context struct} {struct sha512_ctx}
@end deftp

@defvr Constant SHA512_DIGEST_SIZE
The size of a SHA512 digest, i.e. 64.
@end defvr

@defvr Constant SHA512_DATA_SIZE
The internal block size of SHA512. Useful for some special constructions,
in particular HMAC-SHA512.
@end defvr

@deftypefun void sha512_init (struct sha512_ctx *@var{ctx})
Initialize the SHA512 state.
@end deftypefun

@deftypefun void sha512_update (struct sha512_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void sha512_digest (struct sha512_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{SHA512_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{sha512_init}.
@end deftypefun

@subsubsection @acronym{SHA384}

SHA384 is a variant of SHA512, with a different initial state, and with
the output truncated to 384 bits, or 48 octets. Nettle defines SHA384 in
@file{<nettle/sha2.h>} (and in @file{<nettle/sha.h>}, for backwards
compatibility).

@deftp {Context struct} {struct sha384_ctx}
@end deftp

@defvr Constant SHA384_DIGEST_SIZE
The size of a SHA384 digest, i.e. 48.
@end defvr

@defvr Constant SHA384_DATA_SIZE
The internal block size of SHA384. Useful for some special constructions,
in particular HMAC-SHA384.
@end defvr

@deftypefun void sha384_init (struct sha384_ctx *@var{ctx})
Initialize the SHA384 state.
@end deftypefun

@deftypefun void sha384_update (struct sha384_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void sha384_digest (struct sha384_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{SHA384_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{sha384_init}.
@end deftypefun

@subsubsection @acronym{SHA3-224}

The SHA3 hash functions were specified by NIST in repsonse to weaknesses
in SHA1, and doubts about SHA2 hash functions which structurally are
very similar to SHA1. The standard is a result of a competition, where
the winner, also known as Keccak, was designed by Guido Bertoni, Joan
Daemen, Michaël Peeters and Gilles Van Assche. It is structurally very
different from all widely used earlier hash functions. Like SHA2, there
are several variants, with output sizes of 224, 256, 384 and 512 bits
(28, 32, 48 and 64 octets, respectively).

Nettle defines SHA3-224 in @file{<nettle/sha3.h>}.

@deftp {Context struct} {struct sha3_224_ctx}
@end deftp

@defvr Constant SHA3_224_DIGEST_SIZE
The size of a SHA3_224 digest, i.e., 28.
@end defvr

@defvr Constant SHA3_224_DATA_SIZE
The internal block size of SHA3_224.
@end defvr

@deftypefun void sha3_224_init (struct sha3_224_ctx *@var{ctx})
Initialize the SHA3-224 state.
@end deftypefun

@deftypefun void sha3_224_update (struct sha3_224_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void sha3_224_digest (struct sha3_224_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{SHA3_224_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context.
@end deftypefun

@subsubsection @acronym{SHA3-256}

This is SHA3 with 256-bit output size, and possibly the most useful
of the SHA3 hash functions.

Nettle defines SHA3-256 in @file{<nettle/sha3.h>}.

@deftp {Context struct} {struct sha3_256_ctx}
@end deftp

@defvr Constant SHA3_256_DIGEST_SIZE
The size of a SHA3_256 digest, i.e., 32.
@end defvr

@defvr Constant SHA3_256_DATA_SIZE
The internal block size of SHA3_256.
@end defvr

@deftypefun void sha3_256_init (struct sha3_256_ctx *@var{ctx})
Initialize the SHA3-256 state.
@end deftypefun

@deftypefun void sha3_256_update (struct sha3_256_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void sha3_256_digest (struct sha3_256_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{SHA3_256_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context.
@end deftypefun

@subsubsection @acronym{SHA3-384}

This is SHA3 with 384-bit output size.

Nettle defines SHA3-384 in @file{<nettle/sha3.h>}.

@deftp {Context struct} {struct sha3_384_ctx}
@end deftp

@defvr Constant SHA3_384_DIGEST_SIZE
The size of a SHA3_384 digest, i.e., 48.
@end defvr

@defvr Constant SHA3_384_DATA_SIZE
The internal block size of SHA3_384.
@end defvr

@deftypefun void sha3_384_init (struct sha3_384_ctx *@var{ctx})
Initialize the SHA3-384 state.
@end deftypefun

@deftypefun void sha3_384_update (struct sha3_384_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void sha3_384_digest (struct sha3_384_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{SHA3_384_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context.
@end deftypefun

@subsubsection @acronym{SHA3-512}

This is SHA3 with 512-bit output size.

Nettle defines SHA3-512 in @file{<nettle/sha3.h>}.

@deftp {Context struct} {struct sha3_512_ctx}
@end deftp

@defvr Constant SHA3_512_DIGEST_SIZE
The size of a SHA3_512 digest, i.e. 64.
@end defvr

@defvr Constant SHA3_512_DATA_SIZE
The internal block size of SHA3_512.
@end defvr

@deftypefun void sha3_512_init (struct sha3_512_ctx *@var{ctx})
Initialize the SHA3-512 state.
@end deftypefun

@deftypefun void sha3_512_update (struct sha3_512_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void sha3_512_digest (struct sha3_512_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{SHA3_512_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context.
@end deftypefun

@node Legacy hash functions, nettle_hash abstraction, Recommended hash functions, Hash functions
@comment  node-name,  next,  previous,  up
@subsection Legacy hash functions

The hash functions in this section all have some known weaknesses, and
should be avoided for new applications. These hash functions are mainly
useful for compatibility with old applications and protocols. Some are
still considered safe as building blocks for particular constructions,
e.g., there seems to be no known attacks against HMAC-SHA1 or even
HMAC-MD5. In some important cases, use of a ``legacy'' hash function
does not in itself make the application insecure; if a known weakness is
relevant depends on how the hash function is used, and on the threat
model.

@subsubsection @acronym{MD5}

MD5 is a message digest function constructed by Ronald Rivest, and
described in @cite{RFC 1321}. It outputs message digests of 128 bits, or
16 octets. Nettle defines MD5 in @file{<nettle/md5.h>}.

@deftp {Context struct} {struct md5_ctx}
@end deftp

@defvr Constant MD5_DIGEST_SIZE
The size of an MD5 digest, i.e. 16.
@end defvr

@defvr Constant MD5_DATA_SIZE
The internal block size of MD5. Useful for some special constructions,
in particular HMAC-MD5.
@end defvr

@deftypefun void md5_init (struct md5_ctx *@var{ctx})
Initialize the MD5 state.
@end deftypefun

@deftypefun void md5_update (struct md5_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void md5_digest (struct md5_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{MD5_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{md5_init}.
@end deftypefun

The normal way to use MD5 is to call the functions in order: First
@code{md5_init}, then @code{md5_update} zero or more times, and finally
@code{md5_digest}. After @code{md5_digest}, the context is reset to
its initial state, so you can start over calling @code{md5_update} to
hash new data.

To start over, you can call @code{md5_init} at any time.

@subsubsection @acronym{MD2}

MD2 is another hash function of Ronald Rivest's, described in
@cite{RFC 1319}. It outputs message digests of 128 bits, or 16 octets.
Nettle defines MD2 in @file{<nettle/md2.h>}.

@deftp {Context struct} {struct md2_ctx}
@end deftp

@defvr Constant MD2_DIGEST_SIZE
The size of an MD2 digest, i.e. 16.
@end defvr

@defvr Constant MD2_DATA_SIZE
The internal block size of MD2.
@end defvr

@deftypefun void md2_init (struct md2_ctx *@var{ctx})
Initialize the MD2 state.
@end deftypefun

@deftypefun void md2_update (struct md2_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void md2_digest (struct md2_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{MD2_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{md2_init}.
@end deftypefun

@subsubsection @acronym{MD4}

MD4 is a predecessor of MD5, described in @cite{RFC 1320}. Like MD5, it
is constructed by Ronald Rivest. It outputs message digests of 128 bits,
or 16 octets. Nettle defines MD4 in @file{<nettle/md4.h>}. Use of MD4 is
not recommended, but it is sometimes needed for compatibility with
existing applications and protocols.

@deftp {Context struct} {struct md4_ctx}
@end deftp

@defvr Constant MD4_DIGEST_SIZE
The size of an MD4 digest, i.e. 16.
@end defvr

@defvr Constant MD4_DATA_SIZE
The internal block size of MD4.
@end defvr

@deftypefun void md4_init (struct md4_ctx *@var{ctx})
Initialize the MD4 state.
@end deftypefun

@deftypefun void md4_update (struct md4_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void md4_digest (struct md4_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{MD4_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{md4_init}.
@end deftypefun

@subsubsection @acronym{RIPEMD160}

RIPEMD160 is a hash function designed by Hans Dobbertin, Antoon
Bosselaers, and Bart Preneel, as a strengthened version of RIPEMD
(which, like MD4 and MD5, fails the collision-resistance requirement).
It produces message digests of 160 bits, or 20 octets. Nettle defined
RIPEMD160 in @file{nettle/ripemd160.h}.

@deftp {Context struct} {struct ripemd160_ctx}
@end deftp

@defvr Constant RIPEMD160_DIGEST_SIZE
The size of a RIPEMD160 digest, i.e. 20.
@end defvr

@defvr Constant RIPEMD160_DATA_SIZE
The internal block size of RIPEMD160.
@end defvr

@deftypefun void ripemd160_init (struct ripemd160_ctx *@var{ctx})
Initialize the RIPEMD160 state.
@end deftypefun

@deftypefun void ripemd160_update (struct ripemd160_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void ripemd160_digest (struct ripemd160_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{RIPEMD160_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{ripemd160_init}.
@end deftypefun

@subsubsection @acronym{SHA1}

SHA1 is a hash function specified by @dfn{NIST} (The U.S. National
Institute for Standards and Technology). It outputs hash values of 160
bits, or 20 octets. Nettle defines SHA1 in @file{<nettle/sha1.h>} (and
in @file{<nettle/sha.h>}, for backwards compatibility).

@deftp {Context struct} {struct sha1_ctx}
@end deftp

@defvr Constant SHA1_DIGEST_SIZE
The size of a SHA1 digest, i.e. 20.
@end defvr

@defvr Constant SHA1_DATA_SIZE
The internal block size of SHA1. Useful for some special constructions,
in particular HMAC-SHA1.
@end defvr

@deftypefun void sha1_init (struct sha1_ctx *@var{ctx})
Initialize the SHA1 state.
@end deftypefun

@deftypefun void sha1_update (struct sha1_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void sha1_digest (struct sha1_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{SHA1_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{sha1_init}.
@end deftypefun


@subsubsection @acronym{GOSTHASH94}

The GOST94 or GOST R 34.11-94 hash algorithm is a Soviet-era algorithm 
used in Russian government standards (see @cite{RFC 4357}).
It outputs message digests of 256 bits, or 32 octets.
Nettle defines GOSTHASH94 in @file{<nettle/gosthash94.h>}.

@deftp {Context struct} {struct gosthash94_ctx}
@end deftp

@defvr Constant GOSTHASH94_DIGEST_SIZE
The size of a GOSTHASH94 digest, i.e. 32.
@end defvr

@defvr Constant GOSTHASH94_DATA_SIZE
The internal block size of GOSTHASH94, i.e., 32.
@end defvr

@deftypefun void gosthash94_init (struct gosthash94_ctx *@var{ctx})
Initialize the GOSTHASH94 state.
@end deftypefun

@deftypefun void gosthash94_update (struct gosthash94_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Hash some more data.
@end deftypefun

@deftypefun void gosthash94_digest (struct gosthash94_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Performs final processing and extracts the message digest, writing it
to @var{digest}. @var{length} may be smaller than
@code{GOSTHASH94_DIGEST_SIZE}, in which case only the first @var{length}
octets of the digest are written.

This function also resets the context in the same way as
@code{gosthash94_init}.
@end deftypefun

@node nettle_hash abstraction,, Legacy hash functions, Hash functions
@comment  node-name,  next,  previous,  up
@subsection The nettle_hash abstraction

Nettle includes a struct including information about the supported hash
functions. It is defined in @file{<nettle/nettle-meta.h>}, and is used
by Nettle's implementation of @acronym{HMAC} (@pxref{Keyed hash
functions}).

@deftp {Meta struct} @code{struct nettle_hash} name context_size digest_size block_size init update digest
The last three attributes are function pointers, of types
@code{nettle_hash_init_func}, @code{nettle_hash_update_func}, and
@code{nettle_hash_digest_func}. The first argument to these functions is
@code{void *} pointer to a context struct, which is of size
@code{context_size}. 
@end deftp

@deftypevr {Constant Struct} {struct nettle_hash} nettle_md2
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_md4
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_md5
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_ripemd160
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_sha1
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_sha224
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_sha256
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_sha384
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_sha512
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_sha3_256
@deftypevrx {Constant Struct} {struct nettle_hash} nettle_gosthash94
These are all the hash functions that Nettle implements.
@end deftypevr

Nettle also exports a list of all these hashes.

@deftypevr {Constant Array} {struct nettle_hash **} nettle_hashes
This list can be used to dynamically enumerate or search the supported
algorithms. NULL-terminated.
@end deftypevr

@node Cipher functions, Cipher modes, Hash functions, Reference
@comment  node-name,  next,  previous,  up
@section Cipher functions
@cindex Cipher

A @dfn{cipher} is a function that takes a message or @dfn{plaintext}
and a secret @dfn{key} and transforms it to a @dfn{ciphertext}. Given
only the ciphertext, but not the key, it should be hard to find the
plaintext. Given matching pairs of plaintext and ciphertext, it should
be hard to find the key.

@cindex Block Cipher
@cindex Stream Cipher

There are two main classes of ciphers: Block ciphers and stream ciphers.

A block cipher can process data only in fixed size chunks, called
@dfn{blocks}. Typical block sizes are 8 or 16 octets. To encrypt
arbitrary messages, you usually have to pad it to an integral number of
blocks, split it into blocks, and then process each block. The simplest
way is to process one block at a time, independent of each other. That
mode of operation is called @dfn{ECB}, Electronic Code Book mode.
However, using @acronym{ECB} is usually a bad idea. For a start, plaintext blocks
that are equal are transformed to ciphertext blocks that are equal; that
leaks information about the plaintext. Usually you should apply the
cipher is some ``feedback mode'', @dfn{CBC} (Cipher Block Chaining) and
@dfn{CTR} (Counter mode) being two of
of the most popular. See @xref{Cipher modes}, for information on
how to apply @acronym{CBC} and @acronym{CTR} with Nettle.

A stream cipher can be used for messages of arbitrary length. A typical
stream cipher is a keyed pseudo-random generator. To encrypt a plaintext
message of @var{n} octets, you key the generator, generate @var{n}
octets of pseudo-random data, and XOR it with the plaintext. To decrypt,
regenerate the same stream using the key, XOR it to the ciphertext, and
the plaintext is recovered.

@strong{Caution:} The first rule for this kind of cipher is the
same as for a One Time Pad: @emph{never} ever use the same key twice.

A common misconception is that encryption, by itself, implies
authentication. Say that you and a friend share a secret key, and you
receive an encrypted message. You apply the key, and get a plaintext
message that makes sense to you. Can you then be sure that it really was
your friend that wrote the message you're reading? The answer is no. For
example, if you were using a block cipher in ECB mode, an attacker may
pick up the message on its way, and reorder, delete or repeat some of
the blocks. Even if the attacker can't decrypt the message, he can
change it so that you are not reading the same message as your friend
wrote. If you are using a block cipher in @acronym{CBC} mode rather than
ECB, or are using a stream cipher, the possibilities for this sort of
attack are different, but the attacker can still make predictable
changes to the message.

It is recommended to @emph{always} use an authentication mechanism in
addition to encrypting the messages. Popular choices are Message
Authentication Codes like @acronym{HMAC-SHA1} (@pxref{Keyed hash
functions}), or digital signatures like @acronym{RSA}.

Some ciphers have so called ``weak keys'', keys that results in
undesirable structure after the key setup processing, and should be
avoided. In Nettle, most key setup functions have no return value, but
for ciphers with weak keys, the return value indicates whether or not
the given key is weak. For good keys, key setup returns 1, and for weak
keys, it returns 0. When possible, avoid algorithms that
have weak keys. There are several good ciphers that don't have any weak
keys.

To encrypt a message, you first initialize a cipher context for
encryption or decryption with a particular key. You then use the context
to process plaintext or ciphertext messages. The initialization is known
as @dfn{key setup}. With Nettle, it is recommended to use each
context struct for only one direction, even if some of the ciphers use a
single key setup function that can be used for both encryption and
decryption.

@subsection AES
AES is a block cipher, specified by NIST as a replacement for
the older DES standard. The standard is the result of a competition
between cipher designers. The winning design, also known as RIJNDAEL,
was constructed by Joan Daemen and Vincent Rijnmen.

Like all the AES candidates, the winning design uses a block size of 128
bits, or 16 octets, and variable key-size, 128, 192 and 256 bits (16, 24
and 32 octets) being the allowed key sizes. It does not have any weak
keys. Nettle defines AES in @file{<nettle/aes.h>}.
 
@deftp {Context struct} {struct aes_ctx}
@end deftp

@defvr Constant AES_BLOCK_SIZE
The AES block-size, 16
@end defvr

@defvr Constant AES_MIN_KEY_SIZE
@end defvr

@defvr Constant AES_MAX_KEY_SIZE
@end defvr

@defvr Constant AES_KEY_SIZE
Default AES key size, 32
@end defvr

@deftypefun void aes_set_encrypt_key (struct aes_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
@deftypefunx void aes_set_decrypt_key (struct aes_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher, for encryption or decryption, respectively.
@end deftypefun

@deftypefun void aes_invert_key (struct aes_ctx *@var{dst}, const struct aes_ctx *@var{src})
Given a context @var{src} initialized for encryption, initializes the
context struct @var{dst} for decryption, using the same key. If the same
context struct is passed for both @code{src} and @code{dst}, it is
converted in place. Calling @code{aes_set_encrypt_key} and
@code{aes_invert_key} is more efficient than calling
@code{aes_set_encrypt_key} and @code{aes_set_decrypt_key}. This function
is mainly useful for applications which needs to both encrypt and
decrypt using the @emph{same} key.
@end deftypefun

@deftypefun void aes_encrypt (struct aes_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void aes_decrypt (struct aes_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Analogous to @code{aes_encrypt}
@end deftypefun

@subsection ARCFOUR
ARCFOUR is a stream cipher, also known under the trade marked name RC4,
and it is one of the fastest ciphers around. A problem is that the key
setup of ARCFOUR is quite weak, you should never use keys with
structure, keys that are ordinary passwords, or sequences of keys like
``secret:1'', ``secret:2'', @enddots{}. If you have keys that don't look
like random bit strings, and you want to use ARCFOUR, always hash the
key before feeding it to ARCFOUR. Furthermore, the initial bytes of the
generated key stream leak information about the key; for this reason, it
is recommended to discard the first 512 bytes of the key stream.

@example
/* A more robust key setup function for ARCFOUR */
void
arcfour_set_key_hashed(struct arcfour_ctx *ctx,
                       unsigned length, const uint8_t *key)
@{
  struct sha256_ctx hash;
  uint8_t digest[SHA256_DIGEST_SIZE];
  uint8_t buffer[0x200];

  sha256_init(&hash);
  sha256_update(&hash, length, key);
  sha256_digest(&hash, SHA256_DIGEST_SIZE, digest);

  arcfour_set_key(ctx, SHA256_DIGEST_SIZE, digest);
  arcfour_crypt(ctx, sizeof(buffer), buffer, buffer);
@}
@end example

Nettle defines ARCFOUR in @file{<nettle/arcfour.h>}.

@deftp {Context struct} {struct arcfour_ctx}
@end deftp

@defvr Constant ARCFOUR_MIN_KEY_SIZE
Minimum key size, 1
@end defvr

@defvr Constant ARCFOUR_MAX_KEY_SIZE
Maximum key size, 256
@end defvr

@defvr Constant ARCFOUR_KEY_SIZE
Default ARCFOUR key size, 16
@end defvr

@deftypefun void arcfour_set_key (struct arcfour_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. 
@end deftypefun

@deftypefun void arcfour_crypt (struct arcfour_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encrypt some data. The same function is used for both encryption and
decryption. Unlike the block ciphers, this function modifies the
context, so you can split the data into arbitrary chunks and encrypt
them one after another. The result is the same as if you had called
@code{arcfour_crypt} only once with all the data.
@end deftypefun

@subsection ARCTWO
ARCTWO (also known as the trade marked name RC2) is a block cipher
specified in RFC 2268. Nettle also include a variation of the ARCTWO
set key operation that lack one step, to be compatible with the
reverse engineered RC2 cipher description, as described in a Usenet
post to @code{sci.crypt} by Peter Gutmann.

ARCTWO uses a block size of 64 bits, and variable key-size ranging
from 1 to 128 octets. Besides the key, ARCTWO also has a second
parameter to key setup, the number of effective key bits, @code{ekb}.
This parameter can be used to artificially reduce the key size. In
practice, @code{ekb} is usually set equal to the input key size.
Nettle defines ARCTWO in @file{<nettle/arctwo.h>}.

We do not recommend the use of ARCTWO; the Nettle implementation is
provided primarily for interoperability with existing applications and
standards.

@deftp {Context struct} {struct arctwo_ctx}
@end deftp

@defvr Constant ARCTWO_BLOCK_SIZE
The ARCTWO block-size, 8
@end defvr

@defvr Constant ARCTWO_MIN_KEY_SIZE
@end defvr

@defvr Constant ARCTWO_MAX_KEY_SIZE
@end defvr

@defvr Constant ARCTWO_KEY_SIZE
Default ARCTWO key size, 8
@end defvr

@deftypefun void arctwo_set_key_ekb (struct arctwo_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key}, unsigned @var{ekb})
@deftypefunx void arctwo_set_key (struct arctwo_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
@deftypefunx void arctwo_set_key_gutmann (struct arctwo_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption
and decryption. The first function is the most general one, which lets
you provide both the variable size key, and the desired effective key
size (in bits). The maximum value for @var{ekb} is 1024, and for
convenience, @code{ekb = 0} has the same effect as @code{ekb = 1024}.

@code{arctwo_set_key(ctx, length, key)} is equivalent to
@code{arctwo_set_key_ekb(ctx, length, key, 8*length)}, and
@code{arctwo_set_key_gutmann(ctx, length, key)} is equivalent to
@code{arctwo_set_key_ekb(ctx, length, key, 1024)}
@end deftypefun

@deftypefun void arctwo_encrypt (struct arctwo_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not
overlap in any other way.
@end deftypefun

@deftypefun void arctwo_decrypt (struct arctwo_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Analogous to @code{arctwo_encrypt}
@end deftypefun

@subsection BLOWFISH

BLOWFISH is a block cipher designed by Bruce Schneier. It uses a block
size of 64 bits (8 octets), and a variable key size, up to 448 bits. It
has some weak keys. Nettle defines BLOWFISH in @file{<nettle/blowfish.h>}.

@deftp {Context struct} {struct blowfish_ctx}
@end deftp

@defvr Constant BLOWFISH_BLOCK_SIZE
The BLOWFISH block-size, 8
@end defvr

@defvr Constant BLOWFISH_MIN_KEY_SIZE
Minimum BLOWFISH key size, 8
@end defvr

@defvr Constant BLOWFISH_MAX_KEY_SIZE
Maximum BLOWFISH key size, 56
@end defvr

@defvr Constant BLOWFISH_KEY_SIZE
Default BLOWFISH key size, 16
@end defvr

@deftypefun int blowfish_set_key (struct blowfish_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. Checks for weak keys, returning 1
for good keys and 0 for weak keys. Applications that don't care about
weak keys can ignore the return value.

@code{blowfish_encrypt} or @code{blowfish_decrypt} with a weak key will
crash with an assert violation.
@end deftypefun

@deftypefun void blowfish_encrypt (struct blowfish_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void blowfish_decrypt (struct blowfish_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Analogous to @code{blowfish_encrypt}
@end deftypefun

@subsection Camellia

Camellia is a block cipher developed by Mitsubishi and Nippon Telegraph
and Telephone Corporation, described in @cite{RFC3713}, and recommended
by some Japanese and European authorities as an alternative to AES. The
algorithm is patented. The implementation in Nettle is derived from the
implementation released by NTT under the GNU LGPL (v2.1 or later), and
relies on the implicit patent license of the LGPL. There is also a
statement of royalty-free licensing for Camellia at
@url{http://www.ntt.co.jp/news/news01e/0104/010417.html}, but this
statement has some limitations which seem problematic for free software.

Camellia uses a the same block size and key sizes as AES: The block size
is 128 bits (16 octets), and the supported key sizes are 128, 192, and
256 bits. Nettle defines Camellia in @file{<nettle/camellia.h>}.

@deftp {Context struct} {struct camellia_ctx}
@end deftp

@defvr Constant CAMELLIA_BLOCK_SIZE
The CAMELLIA block-size, 16
@end defvr

@defvr Constant CAMELLIA_MIN_KEY_SIZE
@end defvr

@defvr Constant CAMELLIA_MAX_KEY_SIZE
@end defvr

@defvr Constant CAMELLIA_KEY_SIZE
Default CAMELLIA key size, 32
@end defvr

@deftypefun void camellia_set_encrypt_key (struct camellia_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
@deftypefunx void camellia_set_decrypt_key (struct camellia_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher, for encryption or decryption, respectively.
@end deftypefun

@deftypefun void camellia_invert_key (struct camellia_ctx *@var{dst}, const struct camellia_ctx *@var{src})
Given a context @var{src} initialized for encryption, initializes the
context struct @var{dst} for decryption, using the same key. If the same
context struct is passed for both @code{src} and @code{dst}, it is
converted in place. Calling @code{camellia_set_encrypt_key} and
@code{camellia_invert_key} is more efficient than calling
@code{camellia_set_encrypt_key} and @code{camellia_set_decrypt_key}. This function
is mainly useful for applications which needs to both encrypt and
decrypt using the @emph{same} key.
@end deftypefun

@deftypefun void camellia_crypt (struct camellia_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
The same function is used for both encryption and decryption.
@var{length} must be an integral multiple of the block size. If it is
more than one block, the data is processed in ECB mode. @code{src} and
@code{dst} may be equal, but they must not overlap in any other way.
@end deftypefun

@subsection CAST128

CAST-128 is a block cipher, specified in @cite{RFC 2144}. It uses a 64
bit (8 octets) block size, and a variable key size of up to 128 bits.
Nettle defines cast128 in @file{<nettle/cast128.h>}.

@deftp {Context struct} {struct cast128_ctx}
@end deftp

@defvr Constant CAST128_BLOCK_SIZE
The CAST128 block-size, 8
@end defvr

@defvr Constant CAST128_MIN_KEY_SIZE
Minimum CAST128 key size, 5
@end defvr

@defvr Constant CAST128_MAX_KEY_SIZE
Maximum CAST128 key size, 16
@end defvr

@defvr Constant CAST128_KEY_SIZE
Default CAST128 key size, 16
@end defvr

@deftypefun void cast128_set_key (struct cast128_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. 
@end deftypefun

@deftypefun void cast128_encrypt (struct cast128_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void cast128_decrypt (struct cast128_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Analogous to @code{cast128_encrypt}
@end deftypefun

@subsection DES
DES is the old Data Encryption Standard, specified by NIST. It uses a
block size of 64 bits (8 octets), and a key size of 56 bits. However,
the key bits are distributed over 8 octets, where the least significant
bit of each octet may be used for parity. A common way to use DES is to
generate 8 random octets in some way, then set the least significant bit
of each octet to get odd parity, and initialize DES with the resulting
key.

The key size of DES is so small that keys can be found by brute force,
using specialized hardware or lots of ordinary work stations in
parallel. One shouldn't be using plain DES at all today, if one uses
DES at all one should be using ``triple DES'', see DES3 below.

DES also has some weak keys. Nettle defines DES in @file{<nettle/des.h>}.

@deftp {Context struct} {struct des_ctx}
@end deftp

@defvr Constant DES_BLOCK_SIZE
The DES block-size, 8
@end defvr

@defvr Constant DES_KEY_SIZE
DES key size, 8
@end defvr

@deftypefun int des_set_key (struct des_ctx *@var{ctx}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. Parity bits are ignored. Checks for weak keys, returning 1
for good keys and 0 for weak keys. Applications that don't care about
weak keys can ignore the return value.
@end deftypefun

@deftypefun void des_encrypt (struct des_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void des_decrypt (struct des_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Analogous to @code{des_encrypt}
@end deftypefun

@deftypefun int des_check_parity (unsigned @var{length}, const uint8_t *@var{key});
Checks that the given key has correct, odd, parity. Returns 1 for
correct parity, and 0 for bad parity.
@end deftypefun

@deftypefun void des_fix_parity (unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Adjusts the parity bits to match DES's requirements. You need this
function if you have created a random-looking string by a key agreement
protocol, and want to use it as a DES key. @var{dst} and @var{src} may
be equal.
@end deftypefun

@subsection DES3
The inadequate key size of DES has already been mentioned. One way to
increase the key size is to pipe together several DES boxes with
independent keys. It turns out that using two DES ciphers is not as
secure as one might think, even if the key size of the combination is a
respectable 112 bits.

The standard way to increase DES's key size is to use three DES boxes.
The mode of operation is a little peculiar: the middle DES box is wired
in the reverse direction. To encrypt a block with DES3, you encrypt it
using the first 56 bits of the key, then @emph{decrypt} it using the
middle 56 bits of the key, and finally encrypt it again using the last
56 bits of the key. This is known as ``ede'' triple-DES, for
``encrypt-decrypt-encrypt''.

The ``ede'' construction provides some backward compatibility, as you get
plain single DES simply by feeding the same key to all three boxes. That
should help keeping down the gate count, and the price, of hardware
circuits implementing both plain DES and DES3.

DES3 has a key size of 168 bits, but just like plain DES, useless parity
bits are inserted, so that keys are represented as 24 octets (192 bits).
As a 112 bit key is large enough to make brute force attacks
impractical, some applications uses a ``two-key'' variant of triple-DES.
In this mode, the same key bits are used for the first and the last DES
box in the pipe, while the middle box is keyed independently. The
two-key variant is believed to be secure, i.e. there are no known
attacks significantly better than brute force.

Naturally, it's simple to implement triple-DES on top of Nettle's DES
functions. Nettle includes an implementation of three-key ``ede''
triple-DES, it is defined in the same place as plain DES,
@file{<nettle/des.h>}.

@deftp {Context struct} {struct des3_ctx}
@end deftp

@defvr Constant DES3_BLOCK_SIZE
The DES3 block-size is the same as DES_BLOCK_SIZE, 8
@end defvr

@defvr Constant DES3_KEY_SIZE
DES key size, 24
@end defvr

@deftypefun int des3_set_key (struct des3_ctx *@var{ctx}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. Parity bits are ignored. Checks for weak keys, returning 1
if all three keys are good keys, and 0 if one or more key is weak.
Applications that don't care about weak keys can ignore the return
value.
@end deftypefun

For random-looking strings, you can use @code{des_fix_parity} to adjust
the parity bits before calling @code{des3_set_key}.

@deftypefun void des3_encrypt (struct des3_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void des3_decrypt (struct des3_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Analogous to @code{des_encrypt}
@end deftypefun

@subsection Salsa20
Salsa20 is a fairly recent stream cipher designed by D. J. Bernstein. It
is built on the observation that a cryptographic hash function can be
used for encryption: Form the hash input from the secret key and a
counter, xor the hash output and the first block of the plaintext, then
increment the counter to process the next block (similar to CTR mode, see
@pxref{CTR}). Bernstein defined an encryption algorithm, Snuffle,
in this way to ridicule United States export restrictions which treated hash
functions as nice and harmless, but ciphers as dangerous munitions.

Salsa20 uses the same idea, but with a new specialized hash function to
mix key, block counter, and a couple of constants. It's also designed
for speed; on x86_64, it is currently the fastest cipher offered by
nettle. It uses a block size of 512 bits (64 octets) and there are two
specified key sizes, 128 and 256 bits (16 and 32 octets).

@strong{Caution:} The hash function used in Salsa20 is @emph{not}
directly applicable for use as a general hash function. It's @emph{not}
collision resistant if arbitrary inputs are allowed, and furthermore,
the input and output is of fixed size.

When using Salsa20 to process a message, one specifies both a key and a
@dfn{nonce}, the latter playing a similar rôle to the initialization
vector (@acronym{IV}) used with @acronym{CBC} or @acronym{CTR} mode. For
this reason, Nettle uses the term @acronym{IV} to refer to the Salsa20
nonce. One can use the same key for several messages, provided one uses
a unique random @acronym{iv} for each message. The @acronym{iv} is 64
bits (8 octets). The block counter is initialized to zero for each
message, and is also 64 bits (8 octets). Nettle defines Salsa20 in
@file{<nettle/salsa20.h>}.

@deftp {Context struct} {struct salsa20_ctx}
@end deftp

@defvr Constant SALSA20_MIN_KEY_SIZE
@defvrx Constant SALSA20_MAX_KEY_SIZE
The two supported key sizes, 16 and 32 octets.
@end defvr

@defvr Constant SALSA20_KEY_SIZE
Recommended key size, 32.
@end defvr

@defvr Constant SALSA20_BLOCK_SIZE
Salsa20 block size, 64.
@end defvr

@defvr Constant SALSA20_IV_SIZE
Size of the @acronym{IV}, 8.
@end defvr

@deftypefun void salsa20_set_key (struct salsa20_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. Before using the cipher, you @emph{must} also call
@code{salsa20_set_iv}, see below.
@end deftypefun

@deftypefun void salsa20_set_iv (struct salsa20_ctx *@var{ctx}, const uint8_t *@var{iv})
Sets the @acronym{IV}. It is always of size @code{SALSA20_IV_SIZE}, 8
octets. This function also initializes the block counter, setting it to
zero.
@end deftypefun

@deftypefun void salsa20_crypt (struct salsa20_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encrypts or decrypts the data of a message, using salsa20. When a
message is encrypted using a sequence of calls to @code{salsa20_crypt},
all but the last call @emph{must} use a length that is a multiple of
@code{SALSA20_BLOCK_SIZE}.

@end deftypefun

@subsection SERPENT
SERPENT is one of the AES finalists, designed by Ross Anderson, Eli
Biham and Lars Knudsen. Thus, the interface and properties are similar
to AES'. One peculiarity is that it is quite pointless to use it with
anything but the maximum key size, smaller keys are just padded to
larger ones. Nettle defines SERPENT in @file{<nettle/serpent.h>}.

@deftp {Context struct} {struct serpent_ctx}
@end deftp

@defvr Constant SERPENT_BLOCK_SIZE
The SERPENT block-size, 16
@end defvr

@defvr Constant SERPENT_MIN_KEY_SIZE
Minimum SERPENT key size, 16
@end defvr

@defvr Constant SERPENT_MAX_KEY_SIZE
Maximum SERPENT key size, 32
@end defvr

@defvr Constant SERPENT_KEY_SIZE
Default SERPENT key size, 32
@end defvr

@deftypefun void serpent_set_key (struct serpent_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. 
@end deftypefun

@deftypefun void serpent_encrypt (struct serpent_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void serpent_decrypt (struct serpent_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Analogous to @code{serpent_encrypt}
@end deftypefun


@subsection TWOFISH
Another AES finalist, this one designed by Bruce Schneier and others.
Nettle defines it in @file{<nettle/twofish.h>}.

@deftp {Context struct} {struct twofish_ctx}
@end deftp

@defvr Constant TWOFISH_BLOCK_SIZE
The TWOFISH block-size, 16
@end defvr

@defvr Constant TWOFISH_MIN_KEY_SIZE
Minimum TWOFISH key size, 16
@end defvr

@defvr Constant TWOFISH_MAX_KEY_SIZE
Maximum TWOFISH key size, 32
@end defvr

@defvr Constant TWOFISH_KEY_SIZE
Default TWOFISH key size, 32
@end defvr

@deftypefun void twofish_set_key (struct twofish_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initialize the cipher. The same function is used for both encryption and
decryption. 
@end deftypefun

@deftypefun void twofish_encrypt (struct twofish_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encryption function. @var{length} must be an integral multiple of the
block size. If it is more than one block, the data is processed in ECB
mode. @code{src} and @code{dst} may be equal, but they must not overlap
in any other way.
@end deftypefun

@deftypefun void twofish_decrypt (struct twofish_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Analogous to @code{twofish_encrypt}
@end deftypefun

@c @node nettle_cipher, Cipher Block Chaining, Cipher functions, Reference
@c @comment  node-name,  next,  previous,  up
@subsection @code{struct nettle_cipher}

Nettle includes a struct including information about some of the more
regular cipher functions. It should be considered a little experimental,
but can be useful for applications that need a simple way to handle
various algorithms. Nettle defines these structs in
@file{<nettle/nettle-meta.h>}. 

@deftp {Meta struct} @code{struct nettle_cipher} name context_size block_size key_size set_encrypt_key set_decrypt_key encrypt decrypt
The last four attributes are function pointers, of types
@code{nettle_set_key_func} and @code{nettle_crypt_func}. The first
argument to these functions is a @code{void *} pointer to a context
struct, which is of size @code{context_size}.
@end deftp

@deftypevr {Constant Struct} {struct nettle_cipher} nettle_aes128
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_aes192
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_aes256

@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_arctwo40
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_arctwo64
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_arctwo128
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_arctwo_gutmann128

@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_arcfour128

@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_camellia128
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_camellia192
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_camellia256

@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_cast128

@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_serpent128
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_serpent192
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_serpent256

@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_twofish128
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_twofish192
@deftypevrx {Constant Struct} {struct nettle_cipher} nettle_twofish256
Nettle includes such structs for all the @emph{regular} ciphers, i.e.
ones without weak keys or other oddities.
@end deftypevr

Nettle also exports a list of all these ciphers without weak keys or
other oddities.

@deftypevr {Constant Array} {struct nettle_cipher **} nettle_ciphers
This list can be used to dynamically enumerate or search the supported
algorithms. NULL-terminated.
@end deftypevr

@node Cipher modes, Keyed hash functions, Cipher functions, Reference
@comment  node-name,  next,  previous,  up
@section Cipher modes

Cipher modes of operation specifies the procedure to use when encrypting
a message that is larger than the cipher's block size. As explained in
@xref{Cipher functions}, splitting the message into blocks and
processing them independently with the block cipher (Electronic Code
Book mode, @acronym{ECB}) leaks information. Besides @acronym{ECB},
Nettle provides three other modes of operation: Cipher Block Chaining
(@acronym{CBC}), Counter mode (@acronym{CTR}), and Galois/Counter mode
(@acronym{GCM}). @acronym{CBC} is widely used, but there are a few
subtle issues of information leakage, see, e.g.,
@uref{http://www.kb.cert.org/vuls/id/958563, @acronym{SSH} @acronym{CBC}
vulnerability}. @acronym{CTR} and @acronym{GCM}
were standardized more recently, and are believed to be more secure.
@acronym{GCM} includes message authentication; for the other modes, one
should always use a @acronym{MAC} (@pxref{Keyed hash functions}) or
signature to authenticate the message.

@menu
* CBC::                         
* CTR::                         
* GCM::                         
@end menu


@node CBC, CTR, Cipher modes, Cipher modes
@comment  node-name,  next,  previous,  up
@subsection Cipher Block Chaining

@cindex Cipher Block Chaining
@cindex CBC Mode

When using @acronym{CBC} mode, plaintext blocks are not encrypted
independently of each other, like in Electronic Cook Book mode. Instead,
when encrypting a block in @acronym{CBC} mode, the previous ciphertext
block is XORed with the plaintext before it is fed to the block cipher.
When encrypting the first block, a random block called an @dfn{IV}, or
Initialization Vector, is used as the ``previous ciphertext block''. The
IV should be chosen randomly, but it need not be kept secret, and can
even be transmitted in the clear together with the encrypted data.

In symbols, if @code{E_k} is the encryption function of a block cipher,
and @code{IV} is the initialization vector, then @code{n} plaintext blocks
@code{M_1},@dots{} @code{M_n} are transformed into @code{n} ciphertext blocks
@code{C_1},@dots{} @code{C_n} as follows:

@example
C_1 = E_k(IV  XOR M_1)
C_2 = E_k(C_1 XOR M_2)

@dots{}

C_n = E_k(C_(n-1) XOR M_n)
@end example

Nettle's includes two functions for applying a block cipher in Cipher
Block Chaining (@acronym{CBC}) mode, one for encryption and one for
decryption. These functions uses @code{void *} to pass cipher contexts
around.

@deftypefun {void} cbc_encrypt (void *@var{ctx}, nettle_crypt_func @var{f}, unsigned @var{block_size}, uint8_t *@var{iv}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
@deftypefunx {void} cbc_decrypt (void *@var{ctx}, void (*@var{f})(), unsigned @var{block_size}, uint8_t *@var{iv}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})

Applies the encryption or decryption function @var{f} in @acronym{CBC}
mode. The final ciphertext block processed is copied into @var{iv}
before returning, so that large message be processed be a sequence of
calls to @code{cbc_encrypt}. The function @var{f} is of type

@code{void f (void *@var{ctx}, unsigned @var{length}, uint8_t @var{dst},
const uint8_t *@var{src})},

@noindent and the @code{cbc_encrypt} and @code{cbc_decrypt} functions pass their
argument @var{ctx} on to @var{f}.
@end deftypefun

There are also some macros to help use these functions correctly.

@deffn Macro CBC_CTX (@var{context_type}, @var{block_size})
Expands to
@example
@{
   context_type ctx;
   uint8_t iv[block_size];
@}
@end example
@end deffn

It can be used to define a @acronym{CBC} context struct, either directly,

@example
struct CBC_CTX(struct aes_ctx, AES_BLOCK_SIZE) ctx;
@end example

or to give it a struct tag,

@example
struct aes_cbc_ctx CBC_CTX (struct aes_ctx, AES_BLOCK_SIZE);
@end example

@deffn Macro CBC_SET_IV (@var{ctx}, @var{iv})
First argument is a pointer to a context struct as defined by @code{CBC_CTX},
and the second is a pointer to an Initialization Vector (IV) that is
copied into that context.
@end deffn

@deffn Macro CBC_ENCRYPT (@var{ctx}, @var{f}, @var{length}, @var{dst}, @var{src})
@deffnx Macro CBC_DECRYPT (@var{ctx}, @var{f}, @var{length}, @var{dst}, @var{src})
A simpler way to invoke @code{cbc_encrypt} and @code{cbc_decrypt}. The
first argument is a pointer to a context struct as defined by
@code{CBC_CTX}, and the second argument is an encryption or decryption
function following Nettle's conventions. The last three arguments define
the source and destination area for the operation.
@end deffn

These macros use some tricks to make the compiler display a warning if
the types of @var{f} and @var{ctx} don't match, e.g. if you try to use
an @code{struct aes_ctx} context with the @code{des_encrypt} function.

@node CTR, GCM, CBC, Cipher modes
@comment  node-name,  next,  previous,  up
@subsection Counter mode

@cindex Counter Mode
@cindex CTR Mode

Counter mode (@acronym{CTR}) uses the block cipher as a keyed
pseudo-random generator. The output of the generator is XORed with the
data to be encrypted. It can be understood as a way to transform a block
cipher to a stream cipher.

The message is divided into @code{n} blocks @code{M_1},@dots{}
@code{M_n}, where @code{M_n} is of size @code{m} which may be smaller
than the block size. Except for the last block, all the message blocks
must be of size equal to the cipher's block size.

If @code{E_k} is the encryption function of a block cipher, @code{IC} is
the initial counter, then the @code{n} plaintext blocks are
transformed into @code{n} ciphertext blocks @code{C_1},@dots{}
@code{C_n} as follows:

@example
C_1 = E_k(IC) XOR M_1
C_2 = E_k(IC + 1) XOR M_2

@dots{}

C_(n-1) = E_k(IC + n - 2) XOR M_(n-1)
C_n = E_k(IC + n - 1) [1..m] XOR M_n
@end example

The @acronym{IC} is the initial value for the counter, it plays a
similar rôle as the @acronym{IV} for @acronym{CBC}. When adding,
@code{IC + x}, @acronym{IC} is interpreted as an integer, in network
byte order. For the last block, @code{E_k(IC + n - 1) [1..m]} means that
the cipher output is truncated to @code{m} bytes.

@deftypefun {void} ctr_crypt (void *@var{ctx}, nettle_crypt_func @var{f}, unsigned @var{block_size}, uint8_t *@var{ctr}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})

Applies the encryption function @var{f} in @acronym{CTR} mode. Note that
for @acronym{CTR} mode, encryption and decryption is the same operation,
and hence @var{f} should always be the encryption function for the
underlying block cipher.

When a message is encrypted using a sequence of calls to
@code{ctr_crypt}, all but the last call @emph{must} use a length that is
a multiple of the block size.
@end deftypefun

Like for @acronym{CBC}, there are also a couple of helper macros.

@deffn Macro CTR_CTX (@var{context_type}, @var{block_size})
Expands to
@example
@{
   context_type ctx;
   uint8_t ctr[block_size];
@}
@end example
@end deffn

@deffn Macro CTR_SET_COUNTER (@var{ctx}, @var{iv})
First argument is a pointer to a context struct as defined by
@code{CTR_CTX}, and the second is a pointer to an initial counter that
is copied into that context.
@end deffn

@deffn Macro CTR_CRYPT (@var{ctx}, @var{f}, @var{length}, @var{dst}, @var{src})
A simpler way to invoke @code{ctr_crypt}. The first argument is a
pointer to a context struct as defined by @code{CTR_CTX}, and the second
argument is an encryption function following Nettle's conventions. The
last three arguments define the source and destination area for the
operation.
@end deffn

@node GCM,  , CTR, Cipher modes
@comment  node-name,  next,  previous,  up
@subsection Galois counter mode

@cindex Galois Counter Mode
@cindex GCM

Galois counter mode is the combination of counter mode with message
authentication based on universal hashing. The main objective of the
design is to provide high performance for hardware implementations,
where other popular @acronym{MAC} algorithms (@pxref{Keyed hash
functions} becomes a bottleneck for high-speed hardware implementations.
It was proposed by David A. McGrew and John Viega in 2005, and
recommended by NIST in 2007,
@uref{http://csrc.nist.gov/publications/nistpubs/800-38D/SP-800-38D.pdf,
NIST Special Publication 800-38D}. It is constructed on top of a block
cipher which must have a block size of 128 bits.

@acronym{GCM} is applied to messages of arbitrary length. The inputs
are:

@itemize
@item 
A key, which can be used for many messages.
@item 
An initialization vector (@acronym{IV}) which @emph{must} be unique for
each message.
@item
Additional authenticated data, which is to be included in the message
authentication, but not encrypted. May be empty.
@item
The plaintext. Maybe empty.
@end itemize

The outputs are a ciphertext, of the same length as the plaintext, and a
message digest of length 128 bits. Nettle's support for @acronym{GCM}
consists of a low-level general interface, some convenience macros, and
specific functions for @acronym{GCM} using @acronym{AES} as the
underlying cipher. These interfaces are defined in @file{<nettle/gcm.h>}

@subsubsection General @acronym{GCM} interface

@deftp {Context struct} {struct gcm_key}
Message independent hash subkey, and related tables.
@end deftp

@deftp {Context struct} {struct gcm_ctx}
Holds state corresponding to a particular message.
@end deftp

@defvr Constant GCM_BLOCK_SIZE
@acronym{GCM}'s block size, 16.
@end defvr

@defvr Constant GCM_IV_SIZE
Recommended size of the @acronym{IV}, 12. Other sizes are allowed.
@end defvr

@deftypefun void gcm_set_key (struct gcm_key *@var{key}, void *@var{cipher}, nettle_crypt_func *@var{f})
Initializes @var{key}. @var{cipher} gives a context struct for the
underlying cipher, which must have been previously initialized for
encryption, and @var{f} is the encryption function.
@end deftypefun

@deftypefun void gcm_set_iv (struct gcm_ctx *@var{ctx}, const struct gcm_key *@var{key}, unsigned @var{length}, const uint8_t *@var{iv})
Initializes @var{ctx} using the given @acronym{IV}. The @var{key}
argument is actually needed only if @var{length} differs from
@code{GCM_IV_SIZE}.
@end deftypefun

@deftypefun void gcm_update (struct gcm_ctx *@var{ctx}, const struct gcm_key *@var{key}, unsigned @var{length}, const uint8_t *@var{data})
Provides associated data to be authenticated. If used, must be called
before @code{gcm_encrypt} or @code{gcm_decrypt}. All but the last call
for each message @emph{must} use a length that is a multiple of the
block size.
@end deftypefun

@deftypefun void gcm_encrypt (struct gcm_ctx *@var{ctx}, const struct gcm_key *@var{key} void *@var{cipher}, nettle_crypt_func *@var{f}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
@deftypefunx void gcm_decrypt (struct gcm_ctx *@var{ctx}, const struct gcm_key *@var{key}, void *@var{cipher}, nettle_crypt_func *@var{f}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encrypts or decrypts the data of a message. @var{cipher} is the context
struct for the underlying cipher and @var{f} is the encryption function.
All but the last call for each message @emph{must} use a length that is
a multiple of the block size.
@end deftypefun

@deftypefun void gcm_digest (struct gcm_ctx *@var{ctx}, const struct gcm_key *@var{key}, void *@var{cipher}, nettle_crypt_func *@var{f}, unsigned @var{length}, uint8_t *@var{digest})
Extracts the message digest (also known ``authentication tag''). This is
the final operation when processing a message. @var{length} is usually
equal to @code{GCM_BLOCK_SIZE}, but if you provide a smaller value,
only the first @var{length} octets of the digest are written.
@end deftypefun

To encrypt a message using @acronym{GCM}, first initialize a context for
the underlying block cipher with a key to use for encryption. Then call
the above functions in the following order: @code{gcm_set_key},
@code{gcm_set_iv}, @code{gcm_update}, @code{gcm_encrypt},
@code{gcm_digest}. The decryption procedure is analogous, just calling
@code{gcm_decrypt} instead of @code{gcm_encrypt} (note that
@acronym{GCM} decryption still uses the encryption function of the
underlying block cipher). To process a new message, using the same key,
call @code{gcm_set_iv} with a new @acronym{iv}.

@subsubsection @acronym{GCM} helper macros

The following macros are defined.

@deffn Macro GCM_CTX (@var{context_type})
This defines an all-in-one context struct, including the context of the
underlying cipher, the hash subkey, and the per-message state. It expands
to
@example
@{
   context_type cipher;
   struct gcm_key key; 
   struct gcm_ctx gcm;
@}
@end example
@end deffn

Example use:
@example
struct gcm_aes_ctx GCM_CTX(struct aes_ctx);
@end example

The following macros operate on context structs of this form.

@deffn Macro GCM_SET_KEY (@var{ctx}, @var{set_key}, @var{encrypt}, @var{length}, @var{data})
First argument, @var{ctx}, is a context struct as defined
by @code{GCM_CTX}. @var{set_key} and @var{encrypt} are functions for
setting the encryption key and for encrypting data using the underlying
cipher. @var{length} and @var{data} give the key.
@end deffn

@deffn Macro GCM_SET_IV (@var{ctx}, @var{length}, @var{data})
First argument is a context struct as defined by
@code{GCM_CTX}. @var{length} and @var{data} give the initialization
vector (@acronym{IV}).
@end deffn

@deffn Macro GCM_UPDATE (@var{ctx}, @var{length}, @var{data})
Simpler way to call @code{gcm_update}. First argument is a context
struct as defined by @code{GCM_CTX}
@end deffn

@deffn Macro GCM_ENCRYPT (@var{ctx}, @var{encrypt}, @var{length}, @var{dst}, @var{src})
@deffnx Macro GCM_DECRYPT (@var{ctx}, @var{encrypt}, @var{length}, @var{dst}, @var{src})
@deffnx Macro GCM_DIGEST (@var{ctx}, @var{encrypt}, @var{length}, @var{digest})
Simpler way to call @code{gcm_encrypt}, @code{gcm_decrypt} or
@code{gcm_digest}. First argument is a context struct as defined by
@code{GCM_CTX}. Second argument, @var{encrypt}, is a pointer to the
encryption function of the underlying cipher.
@end deffn

@subsubsection @acronym{GCM}-@acronym{AES} interface

The following functions implement the common case of @acronym{GCM} using
@acronym{AES} as the underlying cipher.

@deftp {Context struct} {struct gcm_aes_ctx}
The context struct, defined using @code{GCM_CTX}.
@end deftp

@deftypefun void gcm_aes_set_key (struct gcm_aes_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{key})
Initializes @var{ctx} using the given key. All valid @acronym{AES} key
sizes can be used.
@end deftypefun

@deftypefun void gcm_aes_set_iv (struct gcm_aes_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{iv})
Initializes the per-message state, using the given @acronym{IV}.
@end deftypefun

@deftypefun void gcm_aes_update (struct gcm_aes_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Provides associated data to be authenticated. If used, must be called
before @code{gcm_aes_encrypt} or @code{gcm_aes_decrypt}. All but the last call
for each message @emph{must} use a length that is a multiple of the
block size.
@end deftypefun

@deftypefun void gcm_aes_encrypt (struct gcm_aes_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
@deftypefunx void gcm_aes_decrypt (struct gcm_aes_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst}, const uint8_t *@var{src})
Encrypts or decrypts the data of a message. All but the last call for
each message @emph{must} use a length that is a multiple of the block
size.

@end deftypefun

@deftypefun void gcm_aes_digest (struct gcm_aes_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Extracts the message digest (also known ``authentication tag''). This is
the final operation when processing a message. @var{length} is usually
equal to @code{GCM_BLOCK_SIZE}, but if you provide a smaller value,
only the first @var{length} octets of the digest are written.
@end deftypefun



@node Keyed hash functions, Key derivation functions, Cipher modes, Reference
@comment  node-name,  next,  previous,  up
@section Keyed Hash Functions

@cindex Keyed Hash Function
@cindex Message Authentication Code
@cindex MAC

A @dfn{keyed hash function}, or @dfn{Message Authentication Code}
(@acronym{MAC}) is a function that takes a key and a message, and
produces fixed size @acronym{MAC}. It should be hard to compute a
message and a matching @acronym{MAC} without knowledge of the key. It
should also be hard to compute the key given only messages and
corresponding @acronym{MAC}s.

Keyed hash functions are useful primarily for message authentication,
when Alice and Bob shares a secret: The sender, Alice, computes the
@acronym{MAC} and attaches it to the message. The receiver, Bob, also computes
the @acronym{MAC} of the message, using the same key, and compares that
to Alice's value. If they match, Bob can be assured that
the message has not been modified on its way from Alice.

However, unlike digital signatures, this assurance is not transferable.
Bob can't show the message and the @acronym{MAC} to a third party and
prove that Alice sent that message. Not even if he gives away the key to
the third party. The reason is that the @emph{same} key is used on both
sides, and anyone knowing the key can create a correct @acronym{MAC} for
any message. If Bob believes that only he and Alice knows the key, and
he knows that he didn't attach a @acronym{MAC} to a particular message,
he knows it must be Alice who did it. However, the third party can't
distinguish between a @acronym{MAC} created by Alice and one created by
Bob.

Keyed hash functions are typically a lot faster than digital signatures
as well.

@subsection @acronym{HMAC}

One can build keyed hash functions from ordinary hash functions. Older
constructions simply concatenate secret key and message and hashes that, but
such constructions have weaknesses. A better construction is
@acronym{HMAC}, described in @cite{RFC 2104}.

For an underlying hash function @code{H}, with digest size @code{l} and
internal block size @code{b}, @acronym{HMAC-H} is constructed as
follows: From a given key @code{k}, two distinct subkeys @code{k_i} and
@code{k_o} are constructed, both of length @code{b}. The
@acronym{HMAC-H} of a message @code{m} is then computed as @code{H(k_o |
H(k_i | m))}, where @code{|} denotes string concatenation.

@acronym{HMAC} keys can be of any length, but it is recommended to use
keys of length @code{l}, the digest size of the underlying hash function
@code{H}. Keys that are longer than @code{b} are shortened to length
@code{l} by hashing with @code{H}, so arbitrarily long keys aren't
very useful. 

Nettle's @acronym{HMAC} functions are defined in @file{<nettle/hmac.h>}.
There are abstract functions that use a pointer to a @code{struct
nettle_hash} to represent the underlying hash function and @code{void *}
pointers that point to three different context structs for that hash
function. There are also concrete functions for @acronym{HMAC-MD5},
@acronym{HMAC-RIPEMD160} @acronym{HMAC-SHA1}, @acronym{HMAC-SHA256}, and
@acronym{HMAC-SHA512}. First, the abstract functions:

@deftypefun void hmac_set_key (void *@var{outer}, void *@var{inner}, void *@var{state}, const struct nettle_hash *@var{H}, unsigned @var{length}, const uint8_t *@var{key})
Initializes the three context structs from the key. The @var{outer} and
@var{inner} contexts corresponds to the subkeys @code{k_o} and
@code{k_i}. @var{state} is used for hashing the message, and is
initialized as a copy of the @var{inner} context.
@end deftypefun

@deftypefun void hmac_update (void *@var{state}, const struct nettle_hash *@var{H}, unsigned @var{length}, const uint8_t *@var{data})
This function is called zero or more times to process the message.
Actually, @code{hmac_update(state, H, length, data)} is equivalent to
@code{H->update(state, length, data)}, so if you wish you can use the
ordinary update function of the underlying hash function instead.
@end deftypefun

@deftypefun void hmac_digest (const void *@var{outer}, const void *@var{inner}, void *@var{state}, const struct nettle_hash *@var{H}, unsigned @var{length}, uint8_t *@var{digest})
Extracts the @acronym{MAC} of the message, writing it to @var{digest}.
@var{outer} and @var{inner} are not modified. @var{length} is usually
equal to @code{H->digest_size}, but if you provide a smaller value,
only the first @var{length} octets of the @acronym{MAC} are written.

This function also resets the @var{state} context so that you can start
over processing a new message (with the same key).
@end deftypefun

Like for @acronym{CBC}, there are some macros to help use these
functions correctly.

@deffn Macro HMAC_CTX (@var{type})
Expands to
@example
@{
   type outer;
   type inner;
   type state;
@}
@end example
@end deffn

It can be used to define a @acronym{HMAC} context struct, either
directly,

@example
struct HMAC_CTX(struct md5_ctx) ctx;
@end example

or to give it a struct tag,

@example
struct hmac_md5_ctx HMAC_CTX (struct md5_ctx);
@end example

@deffn Macro HMAC_SET_KEY (@var{ctx}, @var{H}, @var{length}, @var{key})
@var{ctx} is a pointer to a context struct as defined by
@code{HMAC_CTX}, @var{H} is a pointer to a @code{const struct
nettle_hash} describing the underlying hash function (so it must match
the type of the components of @var{ctx}). The last two arguments specify
the secret key.
@end deffn

@deffn Macro HMAC_DIGEST (@var{ctx}, @var{H}, @var{length}, @var{digest})
@var{ctx} is a pointer to a context struct as defined by
@code{HMAC_CTX}, @var{H} is a pointer to a @code{const struct
nettle_hash} describing the underlying hash function. The last two
arguments specify where the digest is written.
@end deffn

Note that there is no @code{HMAC_UPDATE} macro; simply call
@code{hmac_update} function directly, or the update function of the
underlying hash function.

@subsection Concrete @acronym{HMAC} functions
Now we come to the specialized @acronym{HMAC} functions, which are
easier to use than the general @acronym{HMAC} functions.

@subsubsection @acronym{HMAC-MD5}

@deftp {Context struct} {struct hmac_md5_ctx}
@end deftp

@deftypefun void hmac_md5_set_key (struct hmac_md5_ctx *@var{ctx}, unsigned @var{key_length}, const uint8_t *@var{key})
Initializes the context with the key.
@end deftypefun

@deftypefun void hmac_md5_update (struct hmac_md5_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Process some more data.
@end deftypefun

@deftypefun void hmac_md5_digest (struct hmac_md5_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Extracts the @acronym{MAC}, writing it to @var{digest}. @var{length} may be smaller than
@code{MD5_DIGEST_SIZE}, in which case only the first @var{length}
octets of the @acronym{MAC} are written.

This function also resets the context for processing new messages, with
the same key.
@end deftypefun

@subsubsection @acronym{HMAC-RIPEMD160}

@deftp {Context struct} {struct hmac_ripemd160_ctx}
@end deftp

@deftypefun void hmac_ripemd160_set_key (struct hmac_ripemd160_ctx *@var{ctx}, unsigned @var{key_length}, const uint8_t *@var{key})
Initializes the context with the key.
@end deftypefun

@deftypefun void hmac_ripemd160_update (struct hmac_ripemd160_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Process some more data.
@end deftypefun

@deftypefun void hmac_ripemd160_digest (struct hmac_ripemd160_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Extracts the @acronym{MAC}, writing it to @var{digest}. @var{length} may be smaller than
@code{RIPEMD160_DIGEST_SIZE}, in which case only the first @var{length}
octets of the @acronym{MAC} are written.

This function also resets the context for processing new messages, with
the same key.
@end deftypefun

@subsubsection @acronym{HMAC-SHA1}

@deftp {Context struct} {struct hmac_sha1_ctx}
@end deftp

@deftypefun void hmac_sha1_set_key (struct hmac_sha1_ctx *@var{ctx}, unsigned @var{key_length}, const uint8_t *@var{key})
Initializes the context with the key.
@end deftypefun

@deftypefun void hmac_sha1_update (struct hmac_sha1_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Process some more data.
@end deftypefun

@deftypefun void hmac_sha1_digest (struct hmac_sha1_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Extracts the @acronym{MAC}, writing it to @var{digest}. @var{length} may be smaller than
@code{SHA1_DIGEST_SIZE}, in which case only the first @var{length}
octets of the @acronym{MAC} are written.

This function also resets the context for processing new messages, with
the same key.
@end deftypefun


@subsubsection @acronym{HMAC-SHA256}

@deftp {Context struct} {struct hmac_sha256_ctx}
@end deftp

@deftypefun void hmac_sha256_set_key (struct hmac_sha256_ctx *@var{ctx}, unsigned @var{key_length}, const uint8_t *@var{key})
Initializes the context with the key.
@end deftypefun

@deftypefun void hmac_sha256_update (struct hmac_sha256_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Process some more data.
@end deftypefun

@deftypefun void hmac_sha256_digest (struct hmac_sha256_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Extracts the @acronym{MAC}, writing it to @var{digest}. @var{length} may be smaller than
@code{SHA256_DIGEST_SIZE}, in which case only the first @var{length}
octets of the @acronym{MAC} are written.

This function also resets the context for processing new messages, with
the same key.
@end deftypefun


@subsubsection @acronym{HMAC-SHA512}

@deftp {Context struct} {struct hmac_sha512_ctx}
@end deftp

@deftypefun void hmac_sha512_set_key (struct hmac_sha512_ctx *@var{ctx}, unsigned @var{key_length}, const uint8_t *@var{key})
Initializes the context with the key.
@end deftypefun

@deftypefun void hmac_sha512_update (struct hmac_sha512_ctx *@var{ctx}, unsigned @var{length}, const uint8_t *@var{data})
Process some more data.
@end deftypefun

@deftypefun void hmac_sha512_digest (struct hmac_sha512_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{digest})
Extracts the @acronym{MAC}, writing it to @var{digest}. @var{length} may be smaller than
@code{SHA512_DIGEST_SIZE}, in which case only the first @var{length}
octets of the @acronym{MAC} are written.

This function also resets the context for processing new messages, with
the same key.
@end deftypefun

@node Key derivation functions, Public-key algorithms, Keyed hash functions, Reference
@comment  node-name,  next,  previous,  up
@section Key derivation Functions

@cindex Key Derivation Function
@cindex Password Based Key Derivation Function
@cindex PKCS #5
@cindex KDF
@cindex PBKDF

A @dfn{key derivation function} (@acronym{KDF}) is a function that from
a given symmetric key derives other symmetric keys.  A sub-class of KDFs
is the @dfn{password-based key derivation functions} (@acronym{PBKDFs}),
which take as input a password or passphrase, and its purpose is
typically to strengthen it and protect against certain pre-computation
attacks by using salting and expensive computation.

@subsection @acronym{PBKDF2}
The most well known PBKDF is the @code{PKCS #5 PBKDF2} described in
@cite{RFC 2898} which uses a pseudorandom function such as
@acronym{HMAC-SHA1}.

Nettle's @acronym{PBKDF2} functions are defined in
@file{<nettle/pbkdf2.h>}.  There is an abstract function that operate on
any PRF implemented via the @code{nettle_hash_update_func},
@code{nettle_hash_digest_func} interfaces.  There is also helper macros
and concrete functions PBKDF2-HMAC-SHA1 and PBKDF2-HMAC-SHA256.  First,
the abstract function:

@deftypefun void pbkdf2 (void *mac_ctx, nettle_hash_update_func *update, nettle_hash_digest_func *digest, unsigned digest_size, unsigned iterations, unsigned salt_length, const uint8_t *salt, unsigned length, uint8_t *dst)
Derive symmetric key from a password according to PKCS #5 PBKDF2.  The
PRF is assumed to have been initialized and this function will call the
@var{update} and @var{digest} functions passing the @var{mac_ctx}
context parameter as an argument in order to compute digest of size
@var{digest_size}.  Inputs are the salt @var{salt} of length
@var{salt_length}, the iteration counter @var{iterations} (> 0), and the
desired derived output length @var{length}.  The output buffer is
@var{dst} which must have room for at least @var{length} octets.
@end deftypefun

Like for CBC and HMAC, there is a macro to help use the function
correctly.

@deffn Macro PBKDF2 (@var{ctx}, @var{update}, @var{digest}, @var{digest_size}, @var{iterations}, @var{salt_length}, @var{salt}, @var{length}, @var{dst})
@var{ctx} is a pointer to a context struct passed to the @var{update}
and @var{digest} functions (of the types @code{nettle_hash_update_func}
and @code{nettle_hash_digest_func} respectively) to implement the
underlying PRF with digest size of @var{digest_size}.  Inputs are the
salt @var{salt} of length @var{salt_length}, the iteration counter
@var{iterations} (> 0), and the desired derived output length
@var{length}.  The output buffer is @var{dst} which must have room for
at least @var{length} octets.
@end deffn

@subsection Concrete @acronym{PBKDF2} functions
Now we come to the specialized @acronym{PBKDF2} functions, which are
easier to use than the general @acronym{PBKDF2} function.

@subsubsection @acronym{PBKDF2-HMAC-SHA1}

@deftypefun void pbkdf2_hmac_sha1 (unsigned @var{key_length}, const uint8_t *@var{key}, unsigned @var{iterations}, unsigned @var{salt_length}, const uint8_t *@var{salt}, unsigned @var{length}, uint8_t *@var{dst})
PBKDF2 with HMAC-SHA1.  Derive @var{length} bytes of key into buffer
@var{dst} using the password @var{key} of length @var{key_length} and
salt @var{salt} of length @var{salt_length}, with iteration counter
@var{iterations} (> 0).  The output buffer is @var{dst} which must have
room for at least @var{length} octets.
@end deftypefun

@subsubsection @acronym{PBKDF2-HMAC-SHA256}

@deftypefun void pbkdf2_hmac_sha256 (unsigned @var{key_length}, const uint8_t *@var{key}, unsigned @var{iterations}, unsigned @var{salt_length}, const uint8_t *@var{salt}, unsigned @var{length}, uint8_t *@var{dst})
PBKDF2 with HMAC-SHA256.  Derive @var{length} bytes of key into buffer
@var{dst} using the password @var{key} of length @var{key_length} and
salt @var{salt} of length @var{salt_length}, with iteration counter
@var{iterations} (> 0).  The output buffer is @var{dst} which must have
room for at least @var{length} octets.
@end deftypefun

@node Public-key algorithms, Randomness, Key derivation functions, Reference
@comment  node-name,  next,  previous,  up
@section Public-key algorithms

Nettle uses @acronym{GMP}, the GNU bignum library, for all calculations
with large numbers. In order to use the public-key features of Nettle,
you must install @acronym{GMP}, at least version 3.0, before compiling
Nettle, and you need to link your programs with @code{-lhogweed -lnettle
-lgmp}.

The concept of @dfn{Public-key} encryption and digital signatures was
discovered by Whitfield Diffie and Martin E. Hellman and described in a
paper 1976. In traditional, ``symmetric'', cryptography, sender and
receiver share the same keys, and these keys must be distributed in a
secure way. And if there are many users or entities that need to
communicate, each @emph{pair} needs a shared secret key known by nobody
else.

@cindex Public Key Cryptography
@cindex One-way function

Public-key cryptography uses trapdoor one-way functions. A
@dfn{one-way function} is a function @code{F} such that it is easy to
compute the value @code{F(x)} for any @code{x}, but given a value
@code{y}, it is hard to compute a corresponding @code{x} such that
@code{y = F(x)}. Two examples are cryptographic hash functions, and
exponentiation in certain groups.

A @dfn{trapdoor one-way function} is a function @code{F} that is
one-way, unless one knows some secret information about @code{F}. If one
knows the secret, it is easy to compute both @code{F} and it's inverse.
If this sounds strange, look at the @acronym{RSA} example below.

Two important uses for one-way functions with trapdoors are public-key
encryption, and digital signatures. The public-key encryption functions
in Nettle are not yet documented; the rest of this chapter is about
digital signatures.

To use a digital signature algorithm, one must first create a
@dfn{key-pair}: A public key and a corresponding private key. The private
key is used to sign messages, while the public key is used for verifying
that that signatures and messages match. Some care must be taken when
distributing the public key; it need not be kept secret, but if a bad
guy is able to replace it (in transit, or in some user's list of known
public keys), bad things may happen.

There are two operations one can do with the keys. The signature
operation takes a message and a private key, and creates a signature for
the message. A signature is some string of bits, usually at most a few
thousand bits or a few hundred octets. Unlike paper-and-ink signatures,
the digital signature depends on the message, so one can't cut it out of
context and glue it to a different message.

The verification operation takes a public key, a message, and a string
that is claimed to be a signature on the message, and returns true or
false. If it returns true, that means that the three input values
matched, and the verifier can be sure that someone went through with the
signature operation on that very message, and that the ``someone'' also
knows the private key corresponding to the public key.

The desired properties of a digital signature algorithm are as follows:
Given the public key and pairs of messages and valid signatures on them,
it should be hard to compute the private key, and it should also be hard
to create a new message and signature that is accepted by the
verification operation.

Besides signing meaningful messages, digital signatures can be used for
authorization. A server can be configured with a public key, such that
any client that connects to the service is given a random nonce message.
If the server gets a reply with a correct signature matching the nonce
message and the configured public key, the client is granted access. So
the configuration of the server can be understood as ``grant access to
whoever knows the private key corresponding to this particular public
key, and to no others''.


@menu
* RSA::                         The RSA public key algorithm.
* DSA::                         The DSA digital signature algorithm.
@end menu

@node RSA, DSA, Public-key algorithms, Public-key algorithms
@comment  node-name,  next,  previous,  up
@subsection @acronym{RSA}

The @acronym{RSA} algorithm was the first practical digital signature
algorithm that was constructed. It was described 1978 in a paper by
Ronald Rivest, Adi Shamir and L.M. Adleman, and the technique was also
patented in the @acronym{USA} in 1983. The patent expired on September 20, 2000, and since
that day, @acronym{RSA} can be used freely, even in the @acronym{USA}.

It's remarkably simple to describe the trapdoor function behind
@acronym{RSA}. The ``one-way''-function used is

@example
F(x) = x^e mod n
@end example

I.e. raise x to the @code{e}:th power, while discarding all multiples of
@code{n}. The pair of numbers @code{n} and @code{e} is the public key.
@code{e} can be quite small, even @code{e = 3} has been used, although
slightly larger numbers are recommended. @code{n} should be about 1000
bits or larger.

If @code{n} is large enough, and properly chosen, the inverse of F,
the computation of @code{e}:th roots modulo @code{n}, is very difficult.
But, where's the trapdoor?

Let's first look at how @acronym{RSA} key-pairs are generated. First
@code{n} is chosen as the product of two large prime numbers @code{p}
and @code{q} of roughly the same size (so if @code{n} is 1000 bits,
@code{p} and @code{q} are about 500 bits each). One also computes the
number @code{phi = (p-1)(q-1)}, in mathematical speak, @code{phi} is the
order of the multiplicative group of integers modulo n.

Next, @code{e} is chosen. It must have no factors in common with @code{phi} (in
particular, it must be odd), but can otherwise be chosen more or less
randomly. @code{e = 65537} is a popular choice, because it makes raising
to the @code{e}'th power particularly efficient, and being prime, it
usually has no factors common with @code{phi}.

Finally, a number @code{d}, @code{d < n} is computed such that @code{e d
mod phi = 1}. It can be shown that such a number exists (this is why
@code{e} and @code{phi} must have no common factors), and that for all x,

@example
(x^e)^d mod n = x^(ed) mod n = (x^d)^e mod n = x
@end example

Using Euclid's algorithm, @code{d} can be computed quite easily from
@code{phi} and @code{e}. But it is still hard to get @code{d} without
knowing @code{phi}, which depends on the factorization of @code{n}.

So @code{d} is the trapdoor, if we know @code{d} and @code{y = F(x)}, we can
recover x as @code{y^d mod n}. @code{d} is also the private half of
the @acronym{RSA} key-pair.

The most common signature operation for @acronym{RSA} is defined in
@cite{PKCS#1}, a specification by RSA Laboratories. The message to be
signed is first hashed using a cryptographic hash function, e.g.
@acronym{MD5} or @acronym{SHA1}. Next, some padding, the @acronym{ASN.1}
``Algorithm Identifier'' for the hash function, and the message digest
itself, are concatenated and converted to a number @code{x}. The
signature is computed from @code{x} and the private key as @code{s = x^d
mod n}@footnote{Actually, the computation is not done like this, it is
done more efficiently using @code{p}, @code{q} and the Chinese remainder
theorem (@acronym{CRT}). But the result is the same.}. The signature, @code{s} is a
number of about the same size of @code{n}, and it usually encoded as a
sequence of octets, most significant octet first.

The verification operation is straight-forward, @code{x} is computed
from the message in the same way as above. Then @code{s^e mod n} is
computed, the operation returns true if and only if the result equals
@code{x}.

@subsection Nettle's @acronym{RSA} support

Nettle represents @acronym{RSA} keys using two structures that contain
large numbers (of type @code{mpz_t}).

@deftp {Context struct} {rsa_public_key} size n e
@code{size} is the size, in octets, of the modulo, and is used internally.
@code{n} and @code{e} is the public key.
@end deftp

@deftp {Context struct} {rsa_private_key} size d p q a b c
@code{size} is the size, in octets, of the modulo, and is used internally.
@code{d} is the secret exponent, but it is not actually used when
signing. Instead, the factors @code{p} and @code{q}, and the parameters
@code{a}, @code{b} and @code{c} are used. They are computed from @code{p},
@code{q} and @code{e} such that @code{a e mod (p - 1) = 1, b e mod (q -
1) = 1, c q mod p = 1}.
@end deftp

Before use, these structs must be initialized by calling one of

@deftypefun void rsa_public_key_init (struct rsa_public_key *@var{pub})
@deftypefunx void rsa_private_key_init (struct rsa_private_key *@var{key})
Calls @code{mpz_init} on all numbers in the key struct.
@end deftypefun

and when finished with them, the space for the numbers must be
deallocated by calling one of

@deftypefun void rsa_public_key_clear (struct rsa_public_key *@var{pub})
@deftypefunx void rsa_private_key_clear (struct rsa_private_key *@var{key})
Calls @code{mpz_clear} on all numbers in the key struct.
@end deftypefun

In general, Nettle's @acronym{RSA} functions deviates from Nettle's ``no
memory allocation''-policy. Space for all the numbers, both in the key structs
above, and temporaries, are allocated dynamically. For information on how
to customize allocation, see
@xref{Custom Allocation,,GMP Allocation,gmp, GMP Manual}.

When you have assigned values to the attributes of a key, you must call

@deftypefun int rsa_public_key_prepare (struct rsa_public_key *@var{pub})
@deftypefunx int rsa_private_key_prepare (struct rsa_private_key *@var{key})
Computes the octet size of the key (stored in the @code{size} attribute,
and may also do other basic sanity checks. Returns one if successful, or
zero if the key can't be used, for instance if the modulo is smaller
than the minimum size needed for @acronym{RSA} operations specified by PKCS#1.
@end deftypefun

Before signing or verifying a message, you first hash it with the
appropriate hash function. You pass the hash function's context struct
to the @acronym{RSA} signature function, and it will extract the message
digest and do the rest of the work. There are also alternative functions
that take the hash digest as argument. 

There is currently no support for using SHA224 or SHA384 with
@acronym{RSA} signatures, since there's no gain in either computation
time nor message size compared to using SHA256 and SHA512, respectively.

Creation and verification of signatures is done with the following functions:

@deftypefun int rsa_md5_sign (const struct rsa_private_key *@var{key}, struct md5_ctx *@var{hash}, mpz_t @var{signature})
@deftypefunx int rsa_sha1_sign (const struct rsa_private_key *@var{key}, struct sha1_ctx *@var{hash}, mpz_t @var{signature})
@deftypefunx int rsa_sha256_sign (const struct rsa_private_key *@var{key}, struct sha256_ctx *@var{hash}, mpz_t @var{signature})
@deftypefunx int rsa_sha512_sign (const struct rsa_private_key *@var{key}, struct sha512_ctx *@var{hash}, mpz_t @var{signature})
The signature is stored in @var{signature} (which must have been
@code{mpz_init}'ed earlier). The hash context is reset so that it can be
used for new messages. Returns one on success, or zero on failure.
Signing fails if the key is too small for the given hash size, e.g.,
it's not possible to create a signature using SHA512 and a 512-bit
@acronym{RSA} key.
@end deftypefun

@deftypefun int rsa_md5_sign_digest (const struct rsa_private_key *@var{key}, const uint8_t *@var{digest}, mpz_t @var{signature})
@deftypefunx int rsa_sha1_sign_digest (const struct rsa_private_key *@var{key}, const uint8_t *@var{digest}, mpz_t @var{signature});
@deftypefunx int rsa_sha256_sign_digest (const struct rsa_private_key *@var{key}, const uint8_t *@var{digest}, mpz_t @var{signature});
@deftypefunx int rsa_sha512_sign_digest (const struct rsa_private_key *@var{key}, const uint8_t *@var{digest}, mpz_t @var{signature});
Creates a signature from the given hash digest. @var{digest} should
point to a digest of size @code{MD5_DIGEST_SIZE},
@code{SHA1_DIGEST_SIZE}, or @code{SHA256_DIGEST_SIZE}, respectively. The
signature is stored in @var{signature} (which must have been
@code{mpz_init}:ed earlier). Returns one on success, or zero on failure.
@end deftypefun

@deftypefun int rsa_md5_verify (const struct rsa_public_key *@var{key}, struct md5_ctx *@var{hash}, const mpz_t @var{signature})
@deftypefunx int rsa_sha1_verify (const struct rsa_public_key *@var{key}, struct sha1_ctx *@var{hash}, const mpz_t @var{signature})
@deftypefunx int rsa_sha256_verify (const struct rsa_public_key *@var{key}, struct sha256_ctx *@var{hash}, const mpz_t @var{signature})
@deftypefunx int rsa_sha512_verify (const struct rsa_public_key *@var{key}, struct sha512_ctx *@var{hash}, const mpz_t @var{signature})
Returns 1 if the signature is valid, or 0 if it isn't. In either case,
the hash context is reset so that it can be used for new messages.
@end deftypefun

@deftypefun int rsa_md5_verify_digest (const struct rsa_public_key *@var{key}, const uint8_t *@var{digest}, const mpz_t @var{signature})
@deftypefunx int rsa_sha1_verify_digest (const struct rsa_public_key *@var{key}, const uint8_t *@var{digest}, const mpz_t @var{signature})
@deftypefunx int rsa_sha256_verify_digest (const struct rsa_public_key *@var{key}, const uint8_t *@var{digest}, const mpz_t @var{signature})
@deftypefunx int rsa_sha512_verify_digest (const struct rsa_public_key *@var{key}, const uint8_t *@var{digest}, const mpz_t @var{signature})
Returns 1 if the signature is valid, or 0 if it isn't. @var{digest} should
point to a digest of size @code{MD5_DIGEST_SIZE},
@code{SHA1_DIGEST_SIZE}, or @code{SHA256_DIGEST_SIZE}, respectively.
@end deftypefun

If you need to use the @acronym{RSA} trapdoor, the private key, in a way
that isn't supported by the above functions Nettle also includes a
function that computes @code{x^d mod n} and nothing more, using the
@acronym{CRT} optimization.

@deftypefun void rsa_compute_root (struct rsa_private_key *@var{key}, mpz_t @var{x}, const mpz_t @var{m})
Computes @code{x = m^d}, efficiently.
@end deftypefun

At last, how do you create new keys?

@deftypefun int rsa_generate_keypair (struct rsa_public_key *@var{pub}, struct rsa_private_key *@var{key}, void *@var{random_ctx}, nettle_random_func @var{random}, void *@var{progress_ctx}, nettle_progress_func @var{progress}, unsigned @var{n_size}, unsigned @var{e_size});
There are lots of parameters. @var{pub} and @var{key} is where the
resulting key pair is stored. The structs should be initialized, but you
don't need to call @code{rsa_public_key_prepare} or
@code{rsa_private_key_prepare} after key generation.

@var{random_ctx} and @var{random} is a randomness generator.
@code{random(random_ctx, length, dst)} should generate @code{length}
random octets and store them at @code{dst}. For advice, see
@xref{Randomness}.

@var{progress} and @var{progress_ctx} can be used to get callbacks
during the key generation process, in order to uphold an illusion of
progress. @var{progress} can be NULL, in that case there are no
callbacks.

@var{size_n} is the desired size of the modulo, in bits. If @var{size_e}
is non-zero, it is the desired size of the public exponent and a random
exponent of that size is selected. But if @var{e_size} is zero, it is
assumed that the caller has already chosen a value for @code{e}, and
stored it in @var{pub}.
Returns one on success, and zero on failure. The function can fail for
example if if @var{n_size} is too small, or if @var{e_size} is zero and
@code{pub->e} is an even number.
@end deftypefun

@node DSA,  , RSA, Public-key algorithms
@comment  node-name,  next,  previous,  up
@subsection @acronym{DSA}

The @acronym{DSA} digital signature algorithm is more complex than
@acronym{RSA}. It was specified during the early 1990s, and in 1994 NIST
published @acronym{FIPS} 186 which is the authoritative specification.
Sometimes @acronym{DSA} is referred to using the acronym @acronym{DSS},
for Digital Signature Standard. The most recent revision of the
specification, FIPS186-3, was issueed in 2009, and it adds support for
larger hash functions than @acronym{sha1}.

For @acronym{DSA}, the underlying mathematical problem is the
computation of discreet logarithms. The public key consists of a large
prime @code{p}, a small prime @code{q} which is a factor of @code{p-1},
a number @code{g} which generates a subgroup of order @code{q} modulo
@code{p}, and an element @code{y} in that subgroup.

In the original @acronym{DSA}, the size of @code{q} is fixed to 160
bits, to match with the @acronym{SHA1} hash algorithm. The size of
@code{p} is in principle unlimited, but the
standard specifies only nine specific sizes: @code{512 + l*64}, where
@code{l} is between 0 and 8. Thus, the maximum size of @code{p} is 1024
bits, and sizes less than 1024 bits are considered obsolete and not
secure.

The subgroup requirement means that if you compute 

@example
g^t mod p
@end example

for all possible integers @code{t}, you will get precisely @code{q}
distinct values.

The private key is a secret exponent @code{x}, such that

@example
g^x = y mod p
@end example

In mathematical speak, @code{x} is the @dfn{discrete logarithm} of
@code{y} mod @code{p}, with respect to the generator @code{g}. The size
of @code{x} will also be about the same size as @code{q}. The security of the
@acronym{DSA} algorithm relies on the difficulty of the discrete
logarithm problem. Current algorithms to compute discrete logarithms in
this setting, and hence crack @acronym{DSA}, are of two types. The first
type works directly in the (multiplicative) group of integers mod
@code{p}. The best known algorithm of this type is the Number Field
Sieve, and it's complexity is similar to the complexity of factoring
numbers of the same size as @code{p}. The other type works in the
smaller @code{q}-sized subgroup generated by @code{g}, which has a more
difficult group structure. One good algorithm is Pollard-rho, which has
complexity @code{sqrt(q)}.

The important point is that security depends on the size of @emph{both}
@code{p} and @code{q}, and they should be choosen so that the difficulty
of both discrete logarithm methods are comparable. Today, the security
margin of the original @acronym{DSA} may be uncomfortably small. Using a
@code{p} of 1024 bits implies that cracking using the number field sieve
is expected to take about the same time as factoring a 1024-bit
@acronym{RSA} modulo, and using a @code{q} of size 160 bits implies
that cracking using Pollard-rho will take roughly @code{2^80} group
operations. With the size of @code{q} fixed, tied to the @acronym{SHA1}
digest size, it may be tempting to increase the size of @code{p} to,
say, 4096 bits. This will provide excellent resistance against attacks
like the number field sieve which works in the large group. But it will
do very little to defend against Pollard-rho attacking the small
subgroup; the attacker is slowed down at most by a single factor of 10
due to the more expensive group operation. And the attacker will surely
choose the latter attack.

The signature generation algorithm is randomized; in order to create a
@acronym{DSA} signature, you need a good source for random numbers
(@pxref{Randomness}). Let us describe the common case of a 160-bit
@code{q}.

To create a signature, one starts with the hash digest of the message,
@code{h}, which is a 160 bit number, and a random number @code{k,
0<k<q}, also 160 bits. Next, one computes 

@example
r = (g^k mod p) mod q
s = k^-1 (h + x r) mod q
@end example

The signature is the pair @code{(r, s)}, two 160 bit numbers. Note the
two different mod operations when computing @code{r}, and the use of the
secret exponent @code{x}.

To verify a signature, one first checks that @code{0 < r,s < q}, and
then one computes backwards,

@example
w = s^-1 mod q
v = (g^(w h) y^(w r) mod p) mod q
@end example

The signature is valid if @code{v = r}. This works out because @code{w =
s^-1 mod q = k (h + x r)^-1 mod q}, so that

@example
g^(w h) y^(w r) = g^(w h) (g^x)^(w r) = g^(w (h + x r)) = g^k 
@end example

When reducing mod @code{q} this yields @code{r}. Note that when
verifying a signature, we don't know either @code{k} or @code{x}: those
numbers are secret.

If you can choose between @acronym{RSA} and @acronym{DSA}, which one is
best? Both are believed to be secure. @acronym{DSA} gained popularity in
the late 1990s, as a patent free alternative to @acronym{RSA}. Now that
the @acronym{RSA} patents have expired, there's no compelling reason to
want to use @acronym{DSA}. Today, the original @acronym{DSA} key size
does not provide a large security margin, and it should probably be
phased out together with @acronym{RSA} keys of 1024 bits. Using the
revised @acronym{DSA} algorithm with a larger hash function, in
particular, @acronym{SHA256}, a 256-bit @code{q}, and @code{p} of size
2048 bits or more, should provide for a more comfortable security
margin, but these variants are not yet in wide use.

@acronym{DSA} signatures are smaller than @acronym{RSA} signatures,
which is important for some specialized applications.

From a practical point of view, @acronym{DSA}'s need for a good
randomness source is a serious disadvantage. If you ever use the same
@code{k} (and @code{r}) for two different message, you leak your private
key.

@subsection Nettle's @acronym{DSA} support

Like for @acronym{RSA}, Nettle represents @acronym{DSA} keys using two
structures, containing values of type @code{mpz_t}. For information on
how to customize allocation, see @xref{Custom Allocation,,GMP
Allocation,gmp, GMP Manual}.

Most of the @acronym{DSA} functions are very similar to the
corresponding @acronym{RSA} functions, but there are a few differences
pointed out below. For a start, there are no functions corresponding to
@code{rsa_public_key_prepare} and @code{rsa_private_key_prepare}.

@deftp {Context struct} {dsa_public_key} p q g y
The public parameters described above.
@end deftp

@deftp {Context struct} {dsa_private_key} x
The private key @code{x}.
@end deftp

Before use, these structs must be initialized by calling one of

@deftypefun void dsa_public_key_init (struct dsa_public_key *@var{pub})
@deftypefunx void dsa_private_key_init (struct dsa_private_key *@var{key})
Calls @code{mpz_init} on all numbers in the key struct.
@end deftypefun

When finished with them, the space for the numbers must be
deallocated by calling one of

@deftypefun void dsa_public_key_clear (struct dsa_public_key *@var{pub})
@deftypefunx void dsa_private_key_clear (struct dsa_private_key *@var{key})
Calls @code{mpz_clear} on all numbers in the key struct.
@end deftypefun

Signatures are represented using the structure below, and need to be
initialized and cleared in the same way as the key structs.

@deftp {Context struct} {dsa_signature} r s
@end deftp

@deftypefun void dsa_signature_init (struct dsa_signature *@var{signature})
@deftypefunx void dsa_signature_clear (struct dsa_signature *@var{signature})
You must call @code{dsa_signature_init} before creating or using a
signature, and call @code{dsa_signature_clear} when you are finished
with it.
@end deftypefun

For signing, you need to provide both the public and the private key
(unlike @acronym{RSA}, where the private key struct includes all
information needed for signing), and a source for random numbers.
Signatures can use the @acronym{SHA1} or the @acronym{SHA256} hash
function, although the implementation of @acronym{DSA} with
@acronym{SHA256} should be considered somewhat experimental due to lack
of official test vectors and interoperability testing.

@deftypefun int dsa_sha1_sign (const struct dsa_public_key *@var{pub}, const struct dsa_private_key *@var{key}, void *@var{random_ctx}, nettle_random_func @var{random}, struct sha1_ctx *@var{hash}, struct dsa_signature *@var{signature})
@deftypefunx int dsa_sha1_sign_digest (const struct dsa_public_key *@var{pub}, const struct dsa_private_key *@var{key}, void *@var{random_ctx}, nettle_random_func @var{random}, const uint8_t *@var{digest}, struct dsa_signature *@var{signature})
@deftypefunx int dsa_sha256_sign (const struct dsa_public_key *@var{pub}, const struct dsa_private_key *@var{key}, void *@var{random_ctx}, nettle_random_func @var{random}, struct sha256_ctx *@var{hash}, struct dsa_signature *@var{signature})
@deftypefunx int dsa_sha256_sign_digest (const struct dsa_public_key *@var{pub}, const struct dsa_private_key *@var{key}, void *@var{random_ctx}, nettle_random_func @var{random}, const uint8_t *@var{digest}, struct dsa_signature *@var{signature})
Creates a signature from the given hash context or digest.
@var{random_ctx} and @var{random} is a randomness generator.
@code{random(random_ctx, length, dst)} should generate @code{length}
random octets and store them at @code{dst}. For advice, see
@xref{Randomness}. Returns one on success, or zero on failure.
Signing fails if the key size and the hash size don't match.
@end deftypefun

Verifying signatures is a little easier, since no randomness generator is
needed. The functions are

@deftypefun int dsa_sha1_verify (const struct dsa_public_key *@var{key}, struct sha1_ctx *@var{hash}, const struct dsa_signature *@var{signature})
@deftypefunx int dsa_sha1_verify_digest (const struct dsa_public_key *@var{key}, const uint8_t *@var{digest}, const struct dsa_signature *@var{signature})
@deftypefunx int dsa_sha256_verify (const struct dsa_public_key *@var{key}, struct sha256_ctx *@var{hash}, const struct dsa_signature *@var{signature})
@deftypefunx int dsa_sha256_verify_digest (const struct dsa_public_key *@var{key}, const uint8_t *@var{digest}, const struct dsa_signature *@var{signature})
Verifies a signature. Returns 1 if the signature is valid, otherwise 0.
@end deftypefun

Key generation uses mostly the same parameters as the corresponding
@acronym{RSA} function.

@deftypefun int dsa_generate_keypair (struct dsa_public_key *@var{pub}, struct dsa_private_key *@var{key}, void *@var{random_ctx}, nettle_random_func @var{random}, void *@var{progress_ctx}, nettle_progress_func @var{progress}, unsigned @var{p_bits}, unsigned @var{q_bits})
@var{pub} and @var{key} is where the resulting key pair is stored. The
structs should be initialized before you call this function. 

@var{random_ctx} and @var{random} is a randomness generator.
@code{random(random_ctx, length, dst)} should generate @code{length}
random octets and store them at @code{dst}. For advice, see
@xref{Randomness}.

@var{progress} and @var{progress_ctx} can be used to get callbacks
during the key generation process, in order to uphold an illusion of
progress. @var{progress} can be NULL, in that case there are no
callbacks.

@var{p_bits} and @var{q_bits} are the desired sizes of @code{p} and
@code{q}. To generate keys that conform to the original @acronym{DSA}
standard, you must use @code{q_bits = 160} and select @var{p_bits} of
the form @code{p_bits = 512 + l*64}, for @code{0 <= l <= 8}, where the
smaller sizes are no longer recommended, so you should most likely stick
to @code{p_bits = 1024}. Non-standard sizes are possible, in particular
@code{p_bits} larger than 1024, although @acronym{DSA} implementations
can not in general be expected to support such keys. Also note that
using very large @var{p_bits}, with @var{q_bits} fixed at 160, doesn't
make much sense, because the security is also limited by the size of the
smaller prime. Using a larger @code{q_bits} requires switchign to a
larger hash function. To generate @acronym{DSA} keys for use with
@acronym{SHA256}, use @code{q_bits = 256} and, e.g., @code{p_bits =
2048}.

Returns one on success, and zero on failure. The function will fail if
@var{q_bits} is neither 160 nor 256, or if @var{p_bits} is unreasonably
small.
@end deftypefun

@node Randomness, Ascii encoding, Public-key algorithms, Reference
@comment  node-name,  next,  previous,  up
@section Randomness

@cindex Randomness

A crucial ingredient in many cryptographic contexts is randomness: Let
@code{p} be a random prime, choose a random initialization vector
@code{iv}, a random key @code{k} and a random exponent @code{e}, etc. In
the theories, it is assumed that you have plenty of randomness around.
If this assumption is not true in practice, systems that are otherwise
perfectly secure, can be broken. Randomness has often turned out to be
the weakest link in the chain.

In non-cryptographic applications, such as games as well as scientific
simulation, a good randomness generator usually means a generator that
has good statistical properties, and is seeded by some simple function
of things like the current time, process id, and host name.

However, such a generator is inadequate for cryptography, for at least
two reasons:


@itemize

@item
It's too easy for an attacker to guess the initial seed. Even if it will
take some 2^32 tries before he guesses right, that's far too easy. For
example, if the process id is 16 bits, the resolution of ``current time''
is one second, and the attacker knows what day the generator was seeded,
there are only about 2^32 possibilities to try if all possible values
for the process id and time-of-day are tried.

@item
The generator output reveals too much. By observing only a small segment
of the generator's output, its internal state can be recovered, and from
there, all previous output and all future output can be computed by the
attacker. 
@end itemize

A randomness generator that is used for cryptographic purposes must have
better properties. Let's first look at the seeding, as the issues here
are mostly independent of the rest of the generator. The initial state
of the generator (its seed) must be unguessable by the attacker. So
what's unguessable? It depends on what the attacker already knows. The
concept used in information theory to reason about such things is called
``entropy'', or ``conditional entropy'' (not to be confused with the
thermodynamic concept with the same name). A reasonable requirement is
that the seed contains a conditional entropy of at least some 80-100
bits. This property can be explained as follows: Allow the attacker to
ask @code{n} yes-no-questions, of his own choice, about the seed. If
the attacker, using this question-and-answer session, as well as any
other information he knows about the seeding process, still can't guess
the seed correctly, then the conditional entropy is more than @code{n}
bits.

@cindex Entropy
@cindex Conditional entropy

Let's look at an example. Say information about timing of received
network packets is used in the seeding process. If there is some random
network traffic going on, this will contribute some bits of entropy or
``unguessability'' to the seed. However, if the attacker can listen in to
the local network, or if all but a small number of the packets were
transmitted by machines that the attacker can monitor, this additional
information makes the seed easier for the attacker to figure out. Even
if the information is exactly the same, the conditional entropy, or
unguessability, is smaller for an attacker that knows some of it already
before the hypothetical question-and-answer session.

Seeding of good generators is usually based on several sources. The key
point here is that the amount of unguessability that each source
contributes, depends on who the attacker is. Some sources that have been
used are:

@table @asis
@item High resolution timing of i/o activities
Such as completed blocks from spinning hard disks, network packets, etc.
Getting access to such information is quite system dependent, and not
all systems include suitable hardware. If available, it's one of the
better randomness source one can find in a digital, mostly predictable,
computer.

@item User activity
Timing and contents of user interaction events is another popular source
that is available for interactive programs (even if I suspect that it is
sometimes used in order to make the user feel good, not because the
quality of the input is needed or used properly). Obviously, not
available when a machine is unattended. Also beware of networks: User
interaction that happens across a long serial cable, @acronym{TELNET}
session, or even @acronym{SSH} session may be visible to an attacker, in
full or partially.

@item Audio input
Any room, or even a microphone input that's left unconnected, is a
source of some random background noise, which can be fed into the
seeding process.

@item Specialized hardware
Hardware devices with the sole purpose of generating random data have
been designed. They range from radioactive samples with an attached
Geiger counter, to amplification of the inherent noise in electronic
components such as diodes and resistors, to low-frequency sampling of
chaotic systems. Hashing successive images of a Lava lamp is a
spectacular example of the latter type.

@item Secret information
Secret information, such as user passwords or keys, or private files
stored on disk, can provide some unguessability. A problem is that if
the information is revealed at a later time, the unguessability
vanishes. Another problem is that this kind of information tends to be
fairly constant, so if you rely on it and seed your generator regularly,
you risk constructing almost similar seeds or even constructing the same
seed more than once.
@end table

For all practical sources, it's difficult but important to provide a
reliable lower bound on the amount of unguessability that it provides.
Two important points are to make sure that the attacker can't observe
your sources (so if you like the Lava lamp idea, remember that you have
to get your own lamp, and not put it by a window or anywhere else where
strangers can see it), and that hardware failures are detected. What if
the bulb in the Lava lamp, which you keep locked into a cupboard
following the above advice, breaks after a few months?

So let's assume that we have been able to find an unguessable seed,
which contains at least 80 bits of conditional entropy, relative to all
attackers that we care about (typically, we must at the very least
assume that no attacker has root privileges on our machine).

How do we generate output from this seed, and how much can we get? Some
generators (notably the Linux @file{/dev/random} generator) tries to
estimate available entropy and restrict the amount of output. The goal
is that if you read 128 bits from @file{/dev/random}, you should get 128
``truly random'' bits. This is a property that is useful in some
specialized circumstances, for instance when generating key material for
a one time pad, or when working with unconditional blinding, but in most
cases, it doesn't matter much. For most application, there's no limit on
the amount of useful ``random'' data that we can generate from a small
seed; what matters is that the seed is unguessable and that the
generator has good cryptographic properties.

At the heart of all generators lies its internal state. Future output
is determined by the internal state alone. Let's call it the generator's
key. The key is initialized from the unguessable seed. Important
properties of a generator are:

@table @dfn

@item Key-hiding
An attacker observing the output should not be able to recover the
generator's key.

@item Independence of outputs
Observing some of the output should not help the attacker to guess
previous or future output.

@item Forward secrecy
Even if an attacker compromises the generator's key, he should not be
able to guess the generator output @emph{before} the key compromise.

@item Recovery from key compromise
If an attacker compromises the generator's key, he can compute
@emph{all} future output. This is inevitable if the generator is seeded
only once, at startup. However, the generator can provide a reseeding
mechanism, to achieve recovery from key compromise. More precisely: If
the attacker compromises the key at a particular time @code{t_1}, there
is another later time @code{t_2}, such that if the attacker observes all
output generated between @code{t_1} and @code{t_2}, he still can't guess
what output is generated after @code{t_2}.

@end table

Nettle includes one randomness generator that is believed to have all
the above properties, and two simpler ones.

@acronym{ARCFOUR}, like any stream cipher, can be used as a randomness
generator. Its output should be of reasonable quality, if the seed is
hashed properly before it is used with @code{arcfour_set_key}. There's
no single natural way to reseed it, but if you need reseeding, you
should be using Yarrow instead.

The ``lagged Fibonacci'' generator in @file{<nettle/knuth-lfib.h>} is a
fast generator with good statistical properties, but is @strong{not} for
cryptographic use, and therefore not documented here. It is included
mostly because the Nettle test suite needs to generate some test data
from a small seed.

The recommended generator to use is Yarrow, described below.

@subsection Yarrow

Yarrow is a family of pseudo-randomness generators, designed for
cryptographic use, by John Kelsey, Bruce Schneier and Niels Ferguson.
Yarrow-160 is described in a paper at
@url{http://www.counterpane.com/yarrow.html}, and it uses @acronym{SHA1}
and triple-DES, and has a 160-bit internal state. Nettle implements
Yarrow-256, which is similar, but uses @acronym{SHA256} and
@acronym{AES} to get an internal state of 256 bits.

Yarrow was an almost finished project, the paper mentioned above is the
closest thing to a specification for it, but some smaller details are
left out. There is no official reference implementation or test cases.
This section includes an overview of Yarrow, but for the details of
Yarrow-256, as implemented by Nettle, you have to consult the source
code. Maybe a complete specification can be written later.

Yarrow can use many sources (at least two are needed for proper
reseeding), and two randomness ``pools'', referred to as the ``slow pool'' and
the ``fast pool''. Input from the sources is fed alternatingly into the
two pools. When one of the sources has contributed 100 bits of entropy
to the fast pool, a ``fast reseed'' happens and the fast pool is mixed
into the internal state. When at least two of the sources have
contributed at least 160 bits each to the slow pool, a ``slow reseed''
takes place. The contents of both pools are mixed into the internal
state. These procedures should ensure that the generator will eventually
recover after a key compromise.

The output is generated by using @acronym{AES} to encrypt a counter,
using the generator's current key. After each request for output,
another 256 bits are generated which replace the key. This ensures
forward secrecy.

Yarrow can also use a @dfn{seed file} to save state across restarts.
Yarrow is seeded by either feeding it the contents of the previous seed
file, or feeding it input from its sources until a slow reseed happens.

Nettle defines Yarrow-256 in @file{<nettle/yarrow.h>}. 

@deftp {Context struct} {struct yarrow256_ctx}
@end deftp

@deftp {Context struct} {struct yarrow_source}
Information about a single source.
@end deftp

@defvr Constant YARROW256_SEED_FILE_SIZE
Recommanded size of the Yarrow-256 seed file.
@end defvr

@deftypefun void yarrow256_init (struct yarrow256_ctx *@var{ctx}, unsigned @var{nsources}, struct yarrow_source *@var{sources})
Initializes the yarrow context, and its @var{nsources} sources. It's
possible to call it with @var{nsources}=0 and @var{sources}=NULL, if
you don't need the update features.
@end deftypefun

@deftypefun void yarrow256_seed (struct yarrow256_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{seed_file})
Seeds Yarrow-256 from a previous seed file. @var{length} should be at least
@code{YARROW256_SEED_FILE_SIZE}, but it can be larger.

The generator will trust you that the @var{seed_file} data really is
unguessable. After calling this function, you @emph{must} overwrite the old
seed file with newly generated data from @code{yarrow256_random}. If it's
possible for several processes to read the seed file at about the same
time, access must be coordinated using some locking mechanism.
@end deftypefun

@deftypefun int yarrow256_update (struct yarrow256_ctx *@var{ctx}, unsigned @var{source}, unsigned @var{entropy}, unsigned @var{length}, const uint8_t *@var{data})
Updates the generator with data from source @var{SOURCE} (an index that
must be smaller than the number of sources). @var{entropy} is your
estimated lower bound for the entropy in the data, measured in bits.
Calling update with zero @var{entropy} is always safe, no matter if the
data is random or not.

Returns 1 if a reseed happened, in which case an application using a
seed file may want to generate new seed data with
@code{yarrow256_random} and overwrite the seed file. Otherwise, the
function returns 0.
@end deftypefun

@deftypefun void yarrow256_random (struct yarrow256_ctx *@var{ctx}, unsigned @var{length}, uint8_t *@var{dst})
Generates @var{length} octets of output. The generator must be seeded
before you call this function.

If you don't need forward secrecy, e.g. if you need non-secret
randomness for initialization vectors or padding, you can gain some
efficiency by buffering, calling this function for reasonably large
blocks of data, say 100-1000 octets at a time.
@end deftypefun

@deftypefun int yarrow256_is_seeded (struct yarrow256_ctx *@var{ctx})
Returns 1 if the generator is seeded and ready to generate output,
otherwise 0.
@end deftypefun

@deftypefun unsigned yarrow256_needed_sources (struct yarrow256_ctx *@var{ctx})
Returns the number of sources that must reach the threshold before a
slow reseed will happen. Useful primarily when the generator is unseeded.
@end deftypefun

@deftypefun void yarrow256_fast_reseed (struct yarrow256_ctx *@var{ctx})
@deftypefunx void yarrow256_slow_reseed (struct yarrow256_ctx *@var{ctx})
Causes a fast or slow reseed to take place immediately, regardless of the
current entropy estimates of the two pools. Use with care.
@end deftypefun

Nettle includes an entropy estimator for one kind of input source: User
keyboard input.

@deftp {Context struct} {struct yarrow_key_event_ctx}
Information about recent key events.
@end deftp

@deftypefun void yarrow_key_event_init (struct yarrow_key_event_ctx *@var{ctx})
Initializes the context.
@end deftypefun

@deftypefun unsigned yarrow_key_event_estimate (struct yarrow_key_event_ctx *@var{ctx}, unsigned @var{key}, unsigned @var{time})
@var{key} is the id of the key (ASCII value, hardware key code, X
keysym, @dots{}, it doesn't matter), and @var{time} is the timestamp of
the event. The time must be given in units matching the resolution by
which you read the clock. If you read the clock with microsecond
precision, @var{time} should be provided in units of microseconds. But
if you use @code{gettimeofday} on a typical Unix system where the clock
ticks 10 or so microseconds at a time, @var{time} should be given in
units of 10 microseconds.

Returns an entropy estimate, in bits, suitable for calling
@code{yarrow256_update}. Usually, 0, 1 or 2 bits.
@end deftypefun

@node Ascii encoding, Miscellaneous functions, Randomness, Reference
@comment  node-name,  next,  previous,  up
@section Ascii encoding

Encryption will transform your data from text into binary format, and that
may be a problem if you want, for example, to send the data as if it was
plain text in an email (or store it along with descriptive text in a
file). You may then use an encoding from binary to text: each binary byte
is translated into a number of bytes of plain text.

A base-N encoding of data is one representation of data that only uses N
different symbols (instead of the 256 possible values of a byte).

The base64 encoding will always use alphanumeric (upper and lower case)
characters and the '+', '/' and '=' symbols to represent the data. Four
output characters are generated for each three bytes of input. In case
the length of the input is not a multiple of three, padding characters
are added at the end.

The base16 encoding, also known as ``hexadecimal'', uses the decimal
digits and the letters from A to F. Two hexadecimal digits are generated
for each input byte. Base16 may be useful if you want to use the data
for filenames or URLs, for example.

Nettle supports both base64 and base16 encoding and decoding.

Encoding and decoding uses a context struct to maintain its state (with
the exception of base16 encoding, which doesn't need any). To encode or
decode the your data, first initialize the context, then call the update
function as many times as necessary, and complete the operation by
calling the final function.

The following functions can be used to perform base64 encoding and decoding.
They are defined in @file{<nettle/base64.h>}.

@deftp {Context struct} {struct base64_encode_ctx}
@end deftp

@deftypefun {void} base64_encode_init (struct base64_encode_ctx *@var{ctx})
Initializes a base64 context. This is necessary before starting an encoding
session.
@end deftypefun


@deftypefun {unsigned} base64_encode_single (struct base64_encode_ctx *@var{ctx}, uint8_t *@var{dst}, uint8_t @var{src})
Encodes a single byte. Returns amount of output (always 1 or 2).
@end deftypefun

@deffn Macro BASE64_ENCODE_LENGTH (@var{length})
The maximum number of output bytes when passing @var{length} input bytes
to @code{base64_encode_update}.
@end deffn

@deftypefun {unsigned} base64_encode_update (struct base64_encode_ctx *@var{ctx}, uint8_t *@var{dst}, unsigned @var{length}, const uint8_t *@var{src})
After @var{ctx} is initialized, this function may be called to encode @var{length}
bytes from @var{src}. The result will be placed in @var{dst}, and the return value
will be the number of bytes generated. Note that @var{dst} must be at least of size
BASE64_ENCODE_LENGTH(@var{length}).
@end deftypefun

@defvr Constant BASE64_ENCODE_FINAL_LENGTH
The maximum amount of output from @code{base64_encode_final}.
@end defvr

@deftypefun {unsigned} base64_encode_final (struct base64_encode_ctx *@var{ctx}, uint8_t *@var{dst})
After calling base64_encode_update one or more times, this function
should be called to generate the final output bytes, including any
needed paddding. The return value is the number of output bytes
generated.
@end deftypefun

@deftp {Context struct} {struct base64_decode_ctx}
@end deftp

@deftypefun {void} base64_decode_init (struct base64_decode_ctx *@var{ctx})
Initializes a base64 decoding context. This is necessary before starting a decoding
session.
@end deftypefun

@deftypefun {int} base64_decode_single (struct base64_decode_ctx *@var{ctx}, uint8_t *@var{dst}, uint8_t @var{src})
Decodes a single byte (@var{src}) and stores the result in @var{dst}.
Returns amount of output (0 or 1), or -1 on errors.
@end deftypefun

@deffn Macro BASE64_DECODE_LENGTH (@var{length})
The maximum number of output bytes when passing @var{length} input bytes
to @code{base64_decode_update}.
@end deffn

@deftypefun {void} base64_decode_update (struct base64_decode_ctx *@var{ctx}, unsigned *@var{dst_length}, uint8_t *@var{dst}, unsigned @var{src_length}, const uint8_t *@var{src})
After @var{ctx} is initialized, this function may be called to decode @var{src_length}
bytes from @var{src}. @var{dst} should point to an area of size at least
BASE64_DECODE_LENGTH(@var{length}), and for sanity checking, @var{dst_length}
should be initialized to the size of that area before the call.
@var{dst_length} is updated to the amount of decoded output. The function will return
1 on success and 0 on error.
@end deftypefun

@deftypefun {int} base64_decode_final (struct base64_decode_ctx *@var{ctx})
Check that final padding is correct. Returns 1 on success, and 0 on
error.
@end deftypefun

Similarly to the base64 functions, the following functions perform base16 encoding,
and are defined in @file{<nettle/base16.h>}. Note that there is no encoding context
necessary for doing base16 encoding.

@deftypefun {void} base16_encode_single (uint8_t *@var{dst}, uint8_t @var{src})
Encodes a single byte. Always stores two digits in @var{dst}[0] and @var{dst}[1].
@end deftypefun

@deffn Macro BASE16_ENCODE_LENGTH (@var{length})
The number of output bytes when passing @var{length} input bytes to
@code{base16_encode_update}.
@end deffn

@deftypefun {void} base16_encode_update (uint8_t *@var{dst}, unsigned @var{length}, const uint8_t *@var{src})
Always stores BASE16_ENCODE_LENGTH(@var{length}) digits in @var{dst}.
@end deftypefun

@deftp {Context struct} {struct base16_decode_ctx}
@end deftp

@deftypefun {void} base16_decode_init (struct base16_decode_ctx *@var{ctx})
Initializes a base16 decoding context. This is necessary before starting a decoding
session.
@end deftypefun

@deftypefun {int} base16_decode_single (struct base16_decode_ctx *@var{ctx}, uint8_t *@var{dst}, uint8_t @var{src})
Decodes a single byte from @var{src} into @var{dst}. Returns amount of output (0 or 1), or -1 on errors.
@end deftypefun

@deffn Macro BASE16_DECODE_LENGTH (@var{length})
The maximum number of output bytes when passing @var{length} input bytes
to @code{base16_decode_update}.
@end deffn

@deftypefun {int} base16_decode_update (struct base16_decode_ctx *@var{ctx}, unsigned *@var{dst_length}, uint8_t *@var{dst}, unsigned @var{src_length}, const uint8_t *@var{src})
After @var{ctx} is initialized, this function may be called to decode @var{src_length}
bytes from @var{src}. @var{dst} should point to an area of size at least
BASE16_DECODE_LENGTH(@var{length}), and for sanity checking, @var{dst_length}
should be initialized to the size of that area before the call.
@var{dst_length} is updated to the amount of decoded output. The function will return
1 on success and 0 on error.
@end deftypefun

@deftypefun {int} base16_decode_final (struct base16_decode_ctx *@var{ctx})
Checks that the end of data is correct (i.e., an even number of
hexadecimal digits have been seen). Returns 1 on success, and 0 on
error.
@end deftypefun

@node Miscellaneous functions, Compatibility functions, Ascii encoding, Reference
@comment  node-name,  next,  previous,  up
@section Miscellaneous functions

@deftypefun {uint8_t *} memxor (uint8_t *@var{dst}, const uint8_t *@var{src}, size_t @var{n})
XORs the source area on top of the destination area. The interface
doesn't follow the Nettle conventions, because it is intended to be
similar to the ANSI-C @code{memcpy} function.
@end deftypefun

@code{memxor} is declared in @file{<nettle/memxor.h>}.

@node Compatibility functions,  , Miscellaneous functions, Reference
@comment  node-name,  next,  previous,  up
@section Compatibility functions

For convenience, Nettle includes alternative interfaces to some
algorithms, for compatibility with some other popular crypto toolkits.
These are not fully documented here; refer to the source or to the
documentation for the original implementation.

MD5 is defined in [RFC 1321], which includes a reference implementation.
Nettle defines a compatible interface to MD5 in
@file{<nettle/md5-compat.h>}. This file defines the typedef
@code{MD5_CTX}, and declares the functions @code{MD5Init}, @code{MD5Update} and
@code{MD5Final}.

Eric Young's ``libdes'' (also part of OpenSSL) is a quite popular DES
implementation. Nettle includes a subset if its interface in
@file{<nettle/des-compat.h>}. This file defines the typedefs
@code{des_key_schedule} and @code{des_cblock}, two constants
@code{DES_ENCRYPT} and @code{DES_DECRYPT}, and declares one global
variable @code{des_check_key}, and the functions @code{des_cbc_cksum}
@code{des_cbc_encrypt}, @code{des_ecb2_encrypt},
@code{des_ecb3_encrypt}, @code{des_ecb_encrypt},
@code{des_ede2_cbc_encrypt}, @code{des_ede3_cbc_encrypt},
@code{des_is_weak_key}, @code{des_key_sched}, @code{des_ncbc_encrypt}
@code{des_set_key}, and @code{des_set_odd_parity}.

@node Nettle soup, Installation, Reference, Top
@comment  node-name,  next,  previous,  up
@chapter Traditional Nettle Soup
For the serious nettle hacker, here is a recipe for nettle soup. 4 servings.

@itemize @w{}
@item
1 liter fresh nettles (urtica dioica)
@item
2 tablespoons butter
@item
3 tablespoons flour
@item
1 liter stock (meat or vegetable)
@item
1/2 teaspoon salt
@item
a tad white pepper
@item
some cream or milk
@end itemize

Gather 1 liter fresh nettles. Use gloves! Small, tender shoots are
preferable but the tops of larger nettles can also be used.

Rinse the nettles very well. Boil them for 10 minutes in lightly salted
water. Strain the nettles and save the water. Hack the nettles. Melt the
butter and mix in the flour. Dilute with stock and the nettle-water you
saved earlier. Add the hacked nettles. If you wish you can add some milk
or cream at this stage. Bring to a boil and let boil for a few minutes.
Season with salt and pepper.

Serve with boiled egg-halves.

@c And the original Swedish version.
@ignore

Recept på nässelsoppa
4 portioner

1 l färska nässlor
2 msk smör
3 msk vetemjöl
1 l kött- eller grönsaksbuljong
1/2 tsk salt
1-2 krm peppar
(lite grädde eller mjölk)

Plocka 1 liter färska nässlor. Använd handskar! Helst små och späda
skott, men topparna av större nässlor går också bra.

Skölj nässlorna väl. Förväll dem ca 10 minuter i lätt saltat vatten.
Häll av och spara spadet. Hacka nässlorna. Smält smöret, rör i mjöl och
späd med buljong och nässelspad. Lägg i de hackade nässlorna. Om så
önskas, häll i en skvätt mjölk eller grädde. Koka några minuter, och
smaksätt med salt och peppar.

Servera med kokta ägghalvor.
@end ignore

@node Installation, Index, Nettle soup, Top
@comment  node-name,  next,  previous,  up
@chapter Installation

Nettle uses @command{autoconf}. To build it, unpack the source and run

@example
./configure
make
make check
make install
@end example

@noindent
to install in under the default prefix, @file{/usr/local}.

To get a list of configure options, use @code{./configure --help}.

By default, both static and shared libraries are built and installed. To
omit building the shared libraries, use the @option{ --disable-shared}
option to @command{./configure}.

Using GNU make is recommended. For other make programs, in particular
BSD make, you may have to use the @option{--disable-dependency-tracking}
option to @command{./configure}.

@node Index,  , Installation, Top
@comment  node-name,  next,  previous,  up
@unnumbered Function and Concept Index

@printindex cp

@bye

Local Variables:
ispell-local-dictionary: "american"
ispell-skip-region-alist: (
 (ispell-words-keyword forward-line)
 ("^@example" . "^@end.*example")
 ("^@ignore" . "^@end.*ignore")
 ("^@\\(end\\|syncodeindex\\|vskip\\|\\(un\\)?macro\\|node\\|deftp\\) .*$")
 ("^@\\(printindex\\|set\\) .*$")
 ("^@def.*$")
 ;; Allows one level of nested braces in the argument 
 ("@\\(uref\\|value\\|badspell\\|code\\|file\\|var\\|url\\){[^{}]*\\({[^{}]*}[^{}]*\\)*}")
 ("@[a-z]+[{ ]")
 ("@[a-z]+$")
 ("\input texinfo.*$")
 ("ispell-ignore" . "ispell-end-ignore")
 ("^Local Variables:$" . "^End:$"))
End:

@c  LocalWords:  cryptographics crypto LSH GNUPG API GPL LGPL aes rijndael ller
@c  LocalWords:  Sevilla arcfour RC Niels Dassen Colin Kuchling Biham sha Ruud
@c  LocalWords:  Gutmann twofish de Rooij struct MB Rivest RFC Nettle's ECB CBC
@c  LocalWords:  RSA Daemen Rijnmen Schneier DES's ede structs oddnesses HMAC
@c  LocalWords:  NIST Alice's GMP bignum Diffie Adi Shamir Adleman Euclid's ASN
@c  LocalWords:  PKCS callbacks Young's urtica dioica autoconf SSH tad
@c  LocalWords:  unguessability reseeding reseed alternatingly keysym subkeys
@c  LocalWords:  DSA gmp FIPS DSS libdes OpenSSL ARCTWO Josefsson Nikos Andreas
@c  LocalWords:  Mavroyanopoulos Sigfridsson Comstedt interoperability Sparc IC
@c  LocalWords:  DES FIXME Rivest's plaintext ciphertext CTR XORed timestamp
@c  LocalWords:  XORs cryptologists