From ec17251d56054106791bcd4bb691680aa9952f25 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Niels=20M=C3=B6ller?= Date: Fri, 12 May 2023 21:36:50 +0200 Subject: Update config.guess, config.sub and install-sh to latest gnulib versions. --- ChangeLog | 7 + config.guess | 21 ++- config.sub | 35 +++- install-sh | 562 +++++++++++++++++++++++++++++++---------------------------- 4 files changed, 346 insertions(+), 279 deletions(-) diff --git a/ChangeLog b/ChangeLog index cbaceb02..b821b40d 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,10 @@ +2023-05-12 Niels Möller + + Copy files from https://git.savannah.gnu.org/cgit/gnulib.git/plain/build-aux/ + * install-sh: Update to 2020-11-14.01 version. + * config.guess: Update to 2023-01-01 version. + * config.sub: Update to 2023-01-21 version. + 2023-05-10 Niels Möller Fix compile error in --disable-public-key configuration. diff --git a/config.guess b/config.guess index 160ecf09..69188da7 100755 --- a/config.guess +++ b/config.guess @@ -1,10 +1,10 @@ #! /bin/sh # Attempt to guess a canonical system name. -# Copyright 1992-2022 Free Software Foundation, Inc. +# Copyright 1992-2023 Free Software Foundation, Inc. # shellcheck disable=SC2006,SC2268 # see below for rationale -timestamp='2022-05-08' +timestamp='2023-01-01' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -60,7 +60,7 @@ version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright 1992-2022 Free Software Foundation, Inc. +Copyright 1992-2023 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -966,6 +966,12 @@ EOF GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` GUESS=$UNAME_MACHINE-unknown-$GNU_SYS$GNU_REL-$LIBC ;; + x86_64:[Mm]anagarm:*:*|i?86:[Mm]anagarm:*:*) + GUESS="$UNAME_MACHINE-pc-managarm-mlibc" + ;; + *:[Mm]anagarm:*:*) + GUESS="$UNAME_MACHINE-unknown-managarm-mlibc" + ;; *:Minix:*:*) GUESS=$UNAME_MACHINE-unknown-minix ;; @@ -1036,7 +1042,7 @@ EOF k1om:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; - loongarch32:Linux:*:* | loongarch64:Linux:*:* | loongarchx32:Linux:*:*) + loongarch32:Linux:*:* | loongarch64:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; m32r*:Linux:*:*) @@ -1378,8 +1384,11 @@ EOF BePC:Haiku:*:*) # Haiku running on Intel PC compatible. GUESS=i586-pc-haiku ;; - x86_64:Haiku:*:*) - GUESS=x86_64-unknown-haiku + ppc:Haiku:*:*) # Haiku running on Apple PowerPC + GUESS=powerpc-apple-haiku + ;; + *:Haiku:*:*) # Haiku modern gcc (not bound by BeOS compat) + GUESS=$UNAME_MACHINE-unknown-haiku ;; SX-4:SUPER-UX:*:*) GUESS=sx4-nec-superux$UNAME_RELEASE diff --git a/config.sub b/config.sub index dba16e84..de4259e4 100755 --- a/config.sub +++ b/config.sub @@ -1,10 +1,10 @@ #! /bin/sh # Configuration validation subroutine script. -# Copyright 1992-2022 Free Software Foundation, Inc. +# Copyright 1992-2023 Free Software Foundation, Inc. # shellcheck disable=SC2006,SC2268 # see below for rationale -timestamp='2022-01-03' +timestamp='2023-01-21' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -76,7 +76,7 @@ Report bugs and patches to ." version="\ GNU config.sub ($timestamp) -Copyright 1992-2022 Free Software Foundation, Inc. +Copyright 1992-2023 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -145,7 +145,7 @@ case $1 in nto-qnx* | linux-* | uclinux-uclibc* \ | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \ | netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \ - | storm-chaos* | os2-emx* | rtmk-nova*) + | storm-chaos* | os2-emx* | rtmk-nova* | managarm-*) basic_machine=$field1 basic_os=$maybe_os ;; @@ -1075,7 +1075,7 @@ case $cpu-$vendor in pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) cpu=i586 ;; - pentiumpro-* | p6-* | 6x86-* | athlon-* | athalon_*-*) + pentiumpro-* | p6-* | 6x86-* | athlon-* | athlon_*-*) cpu=i686 ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) @@ -1207,7 +1207,7 @@ case $cpu-$vendor in | k1om \ | le32 | le64 \ | lm32 \ - | loongarch32 | loongarch64 | loongarchx32 \ + | loongarch32 | loongarch64 \ | m32c | m32r | m32rle \ | m5200 | m68000 | m680[012346]0 | m68360 | m683?2 | m68k \ | m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x \ @@ -1341,6 +1341,10 @@ EOF kernel=linux os=`echo "$basic_os" | sed -e 's|linux|gnu|'` ;; + managarm*) + kernel=managarm + os=`echo "$basic_os" | sed -e 's|managarm|mlibc|'` + ;; *) kernel= os=$basic_os @@ -1754,7 +1758,7 @@ case $os in | onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \ | midnightbsd* | amdhsa* | unleashed* | emscripten* | wasi* \ | nsk* | powerunix* | genode* | zvmoe* | qnx* | emx* | zephyr* \ - | fiwix* ) + | fiwix* | mlibc* ) ;; # This one is extra strict with allowed versions sco3.2v2 | sco3.2v[4-9]* | sco5v6*) @@ -1762,6 +1766,9 @@ case $os in ;; none) ;; + kernel* ) + # Restricted further below + ;; *) echo Invalid configuration \`"$1"\': OS \`"$os"\' not recognized 1>&2 exit 1 @@ -1772,16 +1779,26 @@ esac # (given a valid OS), if there is a kernel. case $kernel-$os in linux-gnu* | linux-dietlibc* | linux-android* | linux-newlib* \ - | linux-musl* | linux-relibc* | linux-uclibc* ) + | linux-musl* | linux-relibc* | linux-uclibc* | linux-mlibc* ) ;; uclinux-uclibc* ) ;; - -dietlibc* | -newlib* | -musl* | -relibc* | -uclibc* ) + managarm-mlibc* | managarm-kernel* ) + ;; + -dietlibc* | -newlib* | -musl* | -relibc* | -uclibc* | -mlibc* ) # These are just libc implementations, not actual OSes, and thus # require a kernel. echo "Invalid configuration \`$1': libc \`$os' needs explicit kernel." 1>&2 exit 1 ;; + -kernel* ) + echo "Invalid configuration \`$1': \`$os' needs explicit kernel." 1>&2 + exit 1 + ;; + *-kernel* ) + echo "Invalid configuration \`$1': \`$kernel' does not support \`$os'." 1>&2 + exit 1 + ;; kfreebsd*-gnu* | kopensolaris*-gnu*) ;; vxworks-simlinux | vxworks-simwindows | vxworks-spe) diff --git a/install-sh b/install-sh index 4fbbae7b..ec298b53 100755 --- a/install-sh +++ b/install-sh @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2006-10-14.15 +scriptversion=2020-11-14.01; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -35,57 +35,62 @@ scriptversion=2006-10-14.15 # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it +# 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. +tab=' ' nl=' ' -IFS=" "" $nl" +IFS=" $tab$nl" -# set DOITPROG to echo to test this script +# Set DOITPROG to "echo" to test this script. -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi +doit=${DOITPROG-} +doit_exec=${doit:-exec} # Put in absolute file names if you don't have them in your path; # or use environment vars. -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} -posix_glob= posix_mkdir= # Desired mode of installed file. mode=0755 +# Create dirs (including intermediate dirs) using mode 755. +# This is like GNU 'install' as of coreutils 8.32 (2020). +mkdir_umask=22 + +backupsuffix= +chgrpcmd= chmodcmd=$chmodprog chowncmd= -chgrpcmd= -stripcmd= +mvcmd=$mvprog rmcmd="$rmprog -f" -mvcmd="$mvprog" +stripcmd= + src= dst= dir_arg= -dstarg= -no_target_directory= +dst_arg= + +copy_on_change=false +is_target_a_directory=possibly -usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... @@ -95,91 +100,116 @@ In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --c (ignored) --d create directories instead of installing files. --g GROUP $chgrpprog installed files to GROUP. --m MODE $chmodprog installed files to MODE. --o USER $chownprog installed files to USER. --s $stripprog installed files. --t DIRECTORY install into DIRECTORY. --T report an error if DSTFILE is a directory. ---help display this help and exit. ---version display version info and exit. + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -p pass -p to $cpprog. + -s $stripprog installed files. + -S SUFFIX attempt to back up existing files, with suffix SUFFIX. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG + +By default, rm is invoked with -f; when overridden with RMPROG, +it's up to you to specify -f if you want it. + +If -S is not specified, no backups are attempted. + +Email bug reports to bug-automake@gnu.org. +Automake home page: https://www.gnu.org/software/automake/ " while test $# -ne 0; do case $1 in - -c) shift - continue;; + -c) ;; + + -C) copy_on_change=true;; - -d) dir_arg=true - shift - continue;; + -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; + shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 - shift - shift - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - continue;; + case $mode in + *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; -o) chowncmd="$chownprog $2" - shift - shift - continue;; + shift;; - -s) stripcmd=$stripprog - shift - continue;; + -p) cpprog="$cpprog -p";; - -t) dstarg=$2 - shift - shift - continue;; + -s) stripcmd=$stripprog;; - -T) no_target_directory=true - shift - continue;; + -S) backupsuffix="$2" + shift;; + + -t) + is_target_a_directory=always + dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; + + -T) is_target_a_directory=never;; --version) echo "$0 $scriptversion"; exit $?;; - --) shift - break;; + --) shift + break;; - -*) echo "$0: invalid option: $1" >&2 - exit 1;; + -*) echo "$0: invalid option: $1" >&2 + exit 1;; *) break;; esac + shift done -if test $# -ne 0 && test -z "$dir_arg$dstarg"; then +# We allow the use of options -d and -T together, by making -d +# take the precedence; this is for compatibility with GNU install. + +if test -n "$dir_arg"; then + if test -n "$dst_arg"; then + echo "$0: target directory not allowed when installing a directory." >&2 + exit 1 + fi +fi + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do - if test -n "$dstarg"; then + if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dstarg" + set fnord "$@" "$dst_arg" shift # fnord fi shift # arg - dstarg=$arg + dst_arg=$arg + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac done fi @@ -188,13 +218,26 @@ if test $# -eq 0; then echo "$0: no input file specified." >&2 exit 1 fi - # It's OK to call `install-sh -d' without argument. + # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then - trap '(exit $?); exit' 1 2 13 15 + if test $# -gt 1 || test "$is_target_a_directory" = always; then + if test ! -d "$dst_arg"; then + echo "$0: $dst_arg: Is not a directory." >&2 + exit 1 + fi + fi +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. @@ -205,16 +248,16 @@ if test -z "$dir_arg"; then *[0-7]) if test -z "$stripcmd"; then - u_plus_rw= + u_plus_rw= else - u_plus_rw='% 200' + u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then - u_plus_rw= + u_plus_rw= else - u_plus_rw=,u+rw + u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac @@ -222,9 +265,9 @@ fi for src do - # Protect names starting with `-'. + # Protect names problematic for 'test' and other utilities. case $src in - -*) src=./$src ;; + -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then @@ -232,6 +275,10 @@ do dstdir=$dst test -d "$dstdir" dstdir_status=$? + # Don't chown directories that already exist. + if test $dstdir_status = 0; then + chowncmd="" + fi else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command @@ -242,196 +289,154 @@ do exit 1 fi - if test -z "$dstarg"; then + if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi + dst=$dst_arg - dst=$dstarg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst ;; - esac - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. + # If destination is a directory, append the input filename. if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dstarg: Is a directory" >&2 - exit 1 + if test "$is_target_a_directory" = never; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 fi dstdir=$dst - dst=$dstdir/`basename "$src"` + dstbase=`basename "$src"` + case $dst in + */) dst=$dst$dstbase;; + *) dst=$dst/$dstbase;; + esac dstdir_status=0 else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - + dstdir=`dirname "$dst"` test -d "$dstdir" dstdir_status=$? fi fi + case $dstdir in + */) dstdirslash=$dstdir;; + *) dstdirslash=$dstdir/;; + esac + obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + # The $RANDOM variable is not portable (e.g., dash). Use it + # here however when possible just to lower collision chance. + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + + trap ' + ret=$? + rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null + exit $ret + ' 0 + + # Because "mkdir -p" follows existing symlinks and we likely work + # directly in world-writeable /tmp, make sure that the '$tmpdir' + # directory is successfully created first before we actually test + # 'mkdir -p'. + if (umask $mkdir_umask && + $mkdirprog $mkdir_mode "$tmpdir" && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + test_tmpdir="$tmpdir/a" + ls_ld_tmpdir=`ls -ld "$test_tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" else - mkdir_mode= + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writeable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; + trap '' 0;; esac if $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else - # The umask is ridiculous, or mkdir does not conform to POSIX, + # mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in - /*) prefix=/ ;; - -*) prefix=./ ;; - *) prefix= ;; - esac - - case $posix_glob in - '') - if (set -f) 2>/dev/null; then - posix_glob=true - else - posix_glob=false - fi ;; + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; esac oIFS=$IFS IFS=/ - $posix_glob && set -f + set -f set fnord $dstdir shift - $posix_glob && set +f + set +f IFS=$oIFS prefixes= for d do - test -z "$d" && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ done if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true fi fi fi @@ -444,14 +449,25 @@ do else # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ + dsttmp=${dstdirslash}_inst.$$_ + rmtmp=${dstdirslash}_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + (umask $cp_umask && + { test -z "$stripcmd" || { + # Create $dsttmp read-write so that cp doesn't create it read-only, + # which would cause strip to fail. + if test -z "$doit"; then + : >"$dsttmp" # No need to fork-exec 'touch'. + else + $doit touch "$dsttmp" + fi + } + } && + $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # @@ -459,49 +475,67 @@ do # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # Now rename the file to the real destination. - { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \ - || { - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - if test -f "$dst"; then - $doit $rmcmd -f "$dst" 2>/dev/null \ - || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \ - && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\ - || { - echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - else - : - fi - } && + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + set +f && + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # If $backupsuffix is set, and the file being installed + # already exists, attempt a backup. Don't worry if it fails, + # e.g., if mv doesn't support -f. + if test -n "$backupsuffix" && test -f "$dst"; then + $doit $mvcmd -f "$dst" "$dst$backupsuffix" 2>/dev/null + fi - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - } || exit 1 + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 trap '' 0 fi done # Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC0" +# time-stamp-end: "; # UTC" # End: -- cgit v1.2.1