include/rpl_init.inc [topology=1->2->3->4] connection server_1; *** GTID position should be empty here *** SELECT BINLOG_GTID_POS('',); BINLOG_GTID_POS('',) CREATE TABLE t1 (a INT PRIMARY KEY, b VARCHAR(10)) ENGINE=MyISAM; CREATE TABLE t2 (a INT PRIMARY KEY, b VARCHAR(10)) ENGINE=InnoDB; INSERT INTO t1 VALUES (1, "m1"); INSERT INTO t1 VALUES (2, "m2"), (3, "m3"), (4, "m4"); INSERT INTO t2 VALUES (1, "i1"); BEGIN; INSERT INTO t2 VALUES (2, "i2"), (3, "i3"); INSERT INTO t2 VALUES (4, "i4"); COMMIT; *** GTID position should be non-empty here *** SELECT BINLOG_GTID_POS('',); BINLOG_GTID_POS('',) connection server_2; *** GTID position should be the same as on server_1 *** SELECT BINLOG_GTID_POS('',); BINLOG_GTID_POS('',) SELECT * FROM t1 ORDER BY a; a b 1 m1 2 m2 3 m3 4 m4 SELECT * FROM t2 ORDER BY a; a b 1 i1 2 i2 3 i3 4 i4 connection server_3; SELECT * FROM t1 ORDER BY a; a b 1 m1 2 m2 3 m3 4 m4 SELECT * FROM t2 ORDER BY a; a b 1 i1 2 i2 3 i3 4 i4 connection server_4; SELECT * FROM t1 ORDER BY a; a b 1 m1 2 m2 3 m3 4 m4 SELECT * FROM t2 ORDER BY a; a b 1 i1 2 i2 3 i3 4 i4 *** Now take out D, let it fall behind a bit, and then test re-attaching it to A *** connection server_4; include/stop_slave.inc connection server_1; INSERT INTO t1 VALUES (5, "m1a"); INSERT INTO t2 VALUES (5, "i1a"); connection server_4; CHANGE MASTER TO master_host = '127.0.0.1', master_port = MASTER_PORT, MASTER_USE_GTID=CURRENT_POS; Warnings: Warning 1681 'master_use_gtid=current_pos' is deprecated and will be removed in a future release. Please use master_demote_to_slave=1 instead include/start_slave.inc SELECT * FROM t1 ORDER BY a; a b 1 m1 2 m2 3 m3 4 m4 5 m1a SELECT * FROM t2 ORDER BY a; a b 1 i1 2 i2 3 i3 4 i4 5 i1a *** Now move B to D (C is still replicating from B) *** connection server_2; include/stop_slave.inc CHANGE MASTER TO master_host = '127.0.0.1', master_port = SERVER_MYPORT_4, MASTER_USE_GTID=CURRENT_POS; Warnings: Warning 1681 'master_use_gtid=current_pos' is deprecated and will be removed in a future release. Please use master_demote_to_slave=1 instead include/start_slave.inc connection server_4; UPDATE t2 SET b="j1a" WHERE a=5; connection server_2; SELECT * FROM t1 ORDER BY a; a b 1 m1 2 m2 3 m3 4 m4 5 m1a SELECT * FROM t2 ORDER BY a; a b 1 i1 2 i2 3 i3 4 i4 5 j1a *** Now move C to D, after letting it fall a little behind *** connection server_3; include/stop_slave.inc connection server_1; INSERT INTO t2 VALUES (6, "i6b"); INSERT INTO t2 VALUES (7, "i7b"); include/save_master_gtid.inc connection server_3; CHANGE MASTER TO master_host = '127.0.0.1', master_port = SERVER_MYPORT_4, MASTER_USE_GTID=CURRENT_POS; Warnings: Warning 1681 'master_use_gtid=current_pos' is deprecated and will be removed in a future release. Please use master_demote_to_slave=1 instead include/start_slave.inc include/sync_with_master_gtid.inc SELECT * FROM t2 ORDER BY a; a b 1 i1 2 i2 3 i3 4 i4 5 j1a 6 i6b 7 i7b *** Now change everything back to what it was, to make rpl_end.inc happy connection server_2; include/sync_with_master_gtid.inc include/stop_slave.inc CHANGE MASTER TO master_host = '127.0.0.1', master_port = MASTER_MYPORT; include/start_slave.inc include/wait_for_slave_to_start.inc connection server_3; include/stop_slave.inc CHANGE MASTER TO master_host = '127.0.0.1', master_port = SLAVE_MYPORT; include/start_slave.inc include/sync_with_master_gtid.inc connection server_4; include/stop_slave.inc CHANGE MASTER TO master_host = '127.0.0.1', master_port = SERVER_MYPORT_3; include/start_slave.inc connection server_1; DROP TABLE t1,t2; include/save_master_gtid.inc *** A few more checks for BINLOG_GTID_POS function *** SELECT BINLOG_GTID_POS(); ERROR 42000: Incorrect parameter count in the call to native function 'BINLOG_GTID_POS' SELECT BINLOG_GTID_POS('a'); ERROR 42000: Incorrect parameter count in the call to native function 'BINLOG_GTID_POS' SELECT BINLOG_GTID_POS('a',1,NULL); ERROR 42000: Incorrect parameter count in the call to native function 'BINLOG_GTID_POS' SELECT BINLOG_GTID_POS(1,'a'); BINLOG_GTID_POS(1,'a') NULL Warnings: Warning 1292 Truncated incorrect INTEGER value: 'a' SELECT BINLOG_GTID_POS(NULL,NULL); BINLOG_GTID_POS(NULL,NULL) NULL SELECT BINLOG_GTID_POS('',1); BINLOG_GTID_POS('',1) SELECT BINLOG_GTID_POS('a',1); BINLOG_GTID_POS('a',1) NULL SELECT BINLOG_GTID_POS('master-bin.000001',-1); BINLOG_GTID_POS('master-bin.000001',-1) NULL SELECT BINLOG_GTID_POS('master-bin.000001',0); BINLOG_GTID_POS('master-bin.000001',0) SELECT BINLOG_GTID_POS('master-bin.000001',18446744073709551615); BINLOG_GTID_POS('master-bin.000001',18446744073709551615) NULL SELECT BINLOG_GTID_POS('master-bin.000001',18446744073709551616); BINLOG_GTID_POS('master-bin.000001',18446744073709551616) NULL Warnings: Warning 1916 Got overflow when converting '18446744073709551616' to INT. Value truncated *** Some tests of @@GLOBAL.gtid_binlog_state *** connection server_2; include/sync_with_master_gtid.inc include/stop_slave.inc connection server_1; SET @old_state= @@GLOBAL.gtid_binlog_state; SET GLOBAL gtid_binlog_state = ''; ERROR HY000: This operation is not allowed if any GTID has been logged to the binary log. Run RESET MASTER first to erase the log RESET MASTER; SET GLOBAL gtid_binlog_state = ''; FLUSH LOGS; show binary logs; Log_name File_size master-bin.000001 # master-bin.000002 # SET GLOBAL gtid_binlog_state = '0-1-10,1-2-20,0-3-30'; show binary logs; Log_name File_size master-bin.000001 # include/show_binlog_events.inc Log_name Pos Event_type Server_id End_log_pos Info master-bin.000001 # Format_desc # # SERVER_VERSION, BINLOG_VERSION master-bin.000001 # Gtid_list # # [#-#-#] master-bin.000001 # Binlog_checkpoint # # master-bin.000001 SET GLOBAL gtid_binlog_state = @old_state; ERROR HY000: This operation is not allowed if any GTID has been logged to the binary log. Run RESET MASTER first to erase the log RESET MASTER; SET GLOBAL gtid_binlog_state = @old_state; CREATE TABLE t1 (a INT PRIMARY KEY); SET gtid_seq_no=100; INSERT INTO t1 VALUES (1); include/save_master_gtid.inc connection server_2; include/start_slave.inc include/sync_with_master_gtid.inc SELECT * FROM t1; a 1 Gtid_IO_Pos = '0-1-100' *** Test @@LAST_GTID and MASTER_GTID_WAIT() *** connection server_1; DROP TABLE t1; CREATE TABLE t1 (a INT PRIMARY KEY) ENGINE=InnoDB; connection server_2; include/stop_slave.inc connect m1,127.0.0.1,root,,test,$SERVER_MYPORT_1,; SELECT @@last_gtid; @@last_gtid SET gtid_seq_no=110; SELECT @@last_gtid; @@last_gtid BEGIN; SELECT @@last_gtid; @@last_gtid INSERT INTO t1 VALUES (2); SELECT @@last_gtid; @@last_gtid COMMIT; SELECT @@last_gtid; @@last_gtid 0-1-110 connect s1,127.0.0.1,root,,test,$SERVER_MYPORT_2,; SET @pos= '0-1-110'; SELECT master_gtid_wait(NULL); master_gtid_wait(NULL) NULL SELECT master_gtid_wait('', NULL); master_gtid_wait('', NULL) 0 SHOW STATUS LIKE 'Master_gtid_wait_count'; Variable_name Value Master_gtid_wait_count 1 SHOW STATUS LIKE 'Master_gtid_wait_timeouts'; Variable_name Value Master_gtid_wait_timeouts 0 SHOW STATUS LIKE 'Master_gtid_wait_time'; Variable_name Value Master_gtid_wait_time 0 SELECT master_gtid_wait(@pos, 0.5); master_gtid_wait(@pos, 0.5) -1 SELECT * FROM t1 ORDER BY a; a SELECT master_gtid_wait(@pos); connection server_2; include/start_slave.inc connection s1; master_gtid_wait(@pos) 0 SELECT * FROM t1 ORDER BY a; a 2 include/stop_slave.inc connection server_1; SET gtid_domain_id= 1; INSERT INTO t1 VALUES (3); connection s1; SET @pos= 'POS'; SELECT master_gtid_wait(@pos, 0); master_gtid_wait(@pos, 0) -1 SELECT * FROM t1 WHERE a >= 3; a SELECT master_gtid_wait(@pos, -1); connection server_2; include/start_slave.inc connection s1; master_gtid_wait(@pos, -1) 0 SELECT * FROM t1 WHERE a >= 3; a 3 SELECT master_gtid_wait('1-1-1', 0); master_gtid_wait('1-1-1', 0) 0 connection s1; SELECT master_gtid_wait('2-1-1,1-1-4,0-1-110'); connect s2,127.0.0.1,root,,test,$SERVER_MYPORT_2,; SELECT master_gtid_wait('0-1-1000', 0.5); connect s3,127.0.0.1,root,,test,$SERVER_MYPORT_2,; SELECT master_gtid_wait('0-1-2000'); connect s4,127.0.0.1,root,,test,$SERVER_MYPORT_2,; SELECT master_gtid_wait('2-1-10'); connect s5,127.0.0.1,root,,test,$SERVER_MYPORT_2,; SELECT master_gtid_wait('2-1-6', 1); connect s6,127.0.0.1,root,,test,$SERVER_MYPORT_2,; SELECT master_gtid_wait('2-1-5'); connect s7,127.0.0.1,root,,test,$SERVER_MYPORT_2,; SELECT master_gtid_wait('2-1-10'); connect s8,127.0.0.1,root,,test,$SERVER_MYPORT_2,; SELECT master_gtid_wait('2-1-5,1-1-4,0-1-110'); connect s9,127.0.0.1,root,,test,$SERVER_MYPORT_2,; SELECT master_gtid_wait('2-1-2'); connection server_2; SHOW STATUS LIKE 'Master_gtid_wait_timeouts'; Variable_name Value Master_gtid_wait_timeouts 0 SHOW STATUS LIKE 'Master_gtid_wait_count'; Variable_name Value Master_gtid_wait_count 3 SELECT master_gtid_wait('1-1-1'); master_gtid_wait('1-1-1') 0 SHOW STATUS LIKE 'Master_gtid_wait_timeouts'; Variable_name Value Master_gtid_wait_timeouts 0 SHOW STATUS LIKE 'Master_gtid_wait_count'; Variable_name Value Master_gtid_wait_count 4 SET @a= MASTER_GTID_WAIT_TIME; SELECT IF(@a <= 100*1000*1000, "OK", CONCAT("Error: wait time ", @a, " is larger than expected")) AS Master_gtid_wait_time_as_expected; Master_gtid_wait_time_as_expected OK connect s10,127.0.0.1,root,,test,$SERVER_MYPORT_2,; SELECT master_gtid_wait('0-1-109'); connection server_2; SHOW STATUS LIKE 'Master_gtid_wait_timeouts'; Variable_name Value Master_gtid_wait_timeouts 0 SHOW STATUS LIKE 'Master_gtid_wait_count'; Variable_name Value Master_gtid_wait_count 4 SELECT master_gtid_wait('2-1-2', 0.5); master_gtid_wait('2-1-2', 0.5) -1 SHOW STATUS LIKE 'Master_gtid_wait_timeouts'; Variable_name Value Master_gtid_wait_timeouts 1 SHOW STATUS LIKE 'Master_gtid_wait_count'; Variable_name Value Master_gtid_wait_count 5 SET @a= MASTER_GTID_WAIT_TIME; SELECT IF(@a BETWEEN 0.4*1000*1000 AND 100*1000*1000, "OK", CONCAT("Error: wait time ", @a, " not as expected")) AS Master_gtid_wait_time_as_expected; Master_gtid_wait_time_as_expected OK KILL QUERY KILL_ID; connection s3; ERROR 70100: Query execution was interrupted connection server_1; SET gtid_domain_id=2; SET gtid_seq_no=2; INSERT INTO t1 VALUES (4); connection s9; master_gtid_wait('2-1-2') 0 connection server_2; KILL CONNECTION KILL_ID; connection s6; Got one of the listed errors connection server_1; SET gtid_domain_id=1; SET gtid_seq_no=4; INSERT INTO t1 VALUES (5); SET gtid_domain_id=2; SET gtid_seq_no=5; INSERT INTO t1 VALUES (6); connection s8; master_gtid_wait('2-1-5,1-1-4,0-1-110') 0 connection s1; master_gtid_wait('2-1-1,1-1-4,0-1-110') 0 connection s2; master_gtid_wait('0-1-1000', 0.5) -1 connection s5; master_gtid_wait('2-1-6', 1) -1 connection s10; master_gtid_wait('0-1-109') 0 connection server_1; SET gtid_domain_id=2; SET gtid_seq_no=10; INSERT INTO t1 VALUES (7); connection s4; master_gtid_wait('2-1-10') 0 connection s7; master_gtid_wait('2-1-10') 0 *** Test gtid_slave_pos when used with GTID *** connection server_2; include/stop_slave.inc connection server_1; SET gtid_domain_id=2; SET gtid_seq_no=1000; INSERT INTO t1 VALUES (10); INSERT INTO t1 VALUES (11); connection server_2; SET sql_slave_skip_counter= 1; include/start_slave.inc SELECT * FROM t1 WHERE a >= 10 ORDER BY a; a 11 SELECT IF(LOCATE("2-1-1001", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1001 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; status Ok include/stop_slave.inc connection server_1; SET gtid_domain_id=2; SET gtid_seq_no=1010; INSERT INTO t1 VALUES (12); INSERT INTO t1 VALUES (13); connection server_2; SET sql_slave_skip_counter= 2; include/start_slave.inc SELECT * FROM t1 WHERE a >= 10 ORDER BY a; a 11 13 SELECT IF(LOCATE("2-1-1011", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1011 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; status Ok include/stop_slave.inc connection server_1; SET gtid_domain_id=2; SET gtid_seq_no=1020; INSERT INTO t1 VALUES (14); INSERT INTO t1 VALUES (15); INSERT INTO t1 VALUES (16); connection server_2; SET sql_slave_skip_counter= 3; include/start_slave.inc SELECT * FROM t1 WHERE a >= 10 ORDER BY a; a 11 13 15 16 SELECT IF(LOCATE("2-1-1022", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1022 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; status Ok include/stop_slave.inc connection server_1; SET gtid_domain_id=2; SET gtid_seq_no=1030; SET @@binlog_annotate_row_events= 0; INSERT INTO t1 VALUES (17); INSERT INTO t1 VALUES (18); INSERT INTO t1 VALUES (19); SET @@binlog_annotate_row_events= 1; connection server_2; SET sql_slave_skip_counter= 5; include/start_slave.inc SELECT * FROM t1 WHERE a >= 10 ORDER BY a; a 11 13 15 16 19 SELECT IF(LOCATE("2-1-1032", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1032 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; status Ok include/stop_slave.inc connection server_1; SET gtid_domain_id=3; SET gtid_seq_no=100; CREATE TABLE t2 (a INT PRIMARY KEY); DROP TABLE t2; SET gtid_domain_id=2; SET gtid_seq_no=1040; INSERT INTO t1 VALUES (20); connection server_2; SET @saved_mode= @@GLOBAL.slave_ddl_exec_mode; SET GLOBAL slave_ddl_exec_mode=STRICT; SET sql_slave_skip_counter=1; START SLAVE UNTIL master_gtid_pos="3-1-100"; include/sync_with_master_gtid.inc include/wait_for_slave_to_stop.inc SELECT * FROM t2; ERROR 42S02: Table 'test.t2' doesn't exist SELECT IF(LOCATE("3-1-100", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 3-1-100 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; status Ok SET sql_log_bin=0; CALL mtr.add_suppression("Slave: Unknown table 'test\\.t2' Error_code: 1051"); SET sql_log_bin=1; START SLAVE; include/wait_for_slave_sql_error.inc [errno=1051] SELECT IF(LOCATE("3-1-100", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 3-1-100 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; status Ok STOP SLAVE IO_THREAD; SET sql_slave_skip_counter=2; include/start_slave.inc SELECT * FROM t1 WHERE a >= 20 ORDER BY a; a 20 SELECT IF(LOCATE("3-1-101", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 3-1-101 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; status Ok SELECT IF(LOCATE("2-1-1040", @@GLOBAL.gtid_slave_pos)>0, "Ok", CONCAT("ERROR! expected GTID 2-1-1040 not found in gtid_slave_pos: ", @@GLOBAL.gtid_slave_pos)) AS status; status Ok SET GLOBAL slave_ddl_exec_mode= @saved_mode; *** Test GTID-connecting to a master with out-of-order sequence numbers in the binlog. *** connection server_1; SET gtid_domain_id= @@GLOBAL.gtid_domain_id; INSERT INTO t1 VALUES (31); connection server_2; SET gtid_domain_id= @@GLOBAL.gtid_domain_id; INSERT INTO t1 VALUES (32); connection server_1; INSERT INTO t1 VALUES (33); connection server_2; connection server_3; include/stop_slave.inc connection server_1; INSERT INTO t1 VALUES (34); connection server_2; connection server_3; include/start_slave.inc SELECT * FROM t1 WHERE a >= 30 ORDER BY a; a 31 32 33 34 connection server_4; SELECT * FROM t1 WHERE a >= 30 ORDER BY a; a 31 32 33 34 connection server_1; DROP TABLE t1; include/rpl_end.inc # # Start of 10.2 tests # # # MDEV-10134 Add full support for DEFAULT # CREATE TABLE t1 (a VARCHAR(100) DEFAULT BINLOG_GTID_POS("master-bin.000001", 600)); ERROR HY000: Function or expression 'binlog_gtid_pos()' cannot be used in the DEFAULT clause of `a` # # End of 10.2 tests # # # Start of 10.3 tests # # # MDEV-13967 Parameter data type control for Item_long_func # SELECT MASTER_GTID_WAIT(ROW(1,1),'str'); ERROR HY000: Illegal parameter data type row for operation 'master_gtid_wait' SELECT MASTER_GTID_WAIT('str',ROW(1,1)); ERROR HY000: Illegal parameter data type row for operation 'master_gtid_wait' # # End of 10.3 tests #