Chapter 2. Installing and Upgrading MySQL This chapter describes how to obtain and install MySQL. A summary of the procedure follows and later sections provide the details. If you plan to upgrade an existing version of MySQL to a newer version rather than install MySQL for the first time, see Section 2.4.1, "Upgrading MySQL," for information about upgrade procedures and about issues that you should consider before upgrading. If you are interested in migrating to MySQL from another database system, you may wish to read Section A.8, "MySQL 5.1 FAQ --- Migration," which contains answers to some common questions concerning migration issues. 1. Determine whether MySQL runs and is supported on your platform. Please note that not all platforms are equally suitable for running MySQL, and that not all platforms on which MySQL is known to run are officially supported by Oracle Corporation: 2. Choose which distribution to install. Several versions of MySQL are available, and most are available in several distribution formats. You can choose from pre-packaged distributions containing binary (precompiled) programs or source code. When in doubt, use a binary distribution. We also provide public access to our current source tree for those who want to see our most recent developments and help us test new code. To determine which version and type of distribution you should use, see Section 2.1.2, "Choosing Which MySQL Distribution to Install." 3. Download the distribution that you want to install. For instructions, see Section 2.1.3, "How to Get MySQL." To verify the integrity of the distribution, use the instructions in Section 2.1.4, "Verifying Package Integrity Using MD5 Checksums or GnuPG." 4. Install the distribution. To install MySQL from a binary distribution, use the instructions in Section 2.2, "Installing MySQL from Generic Binaries on Unix/Linux." To install MySQL from a source distribution or from the current development source tree, use the instructions in Section 2.3, "MySQL Installation Using a Source Distribution." 5. Perform any necessary post-installation setup. After installing MySQL, read Section 2.13, "Post-Installation Setup and Testing." This section contains important information about making sure the MySQL server is working properly. It also describes how to secure the initial MySQL user accounts, which have no passwords until you assign passwords. The section applies whether you install MySQL using a binary or source distribution. 6. If you want to run the MySQL benchmark scripts, Perl support for MySQL must be available. See Section 2.15, "Perl Installation Notes." 2.1. General Installation Guidance The immediately following sections contain the information necessary to choose, download, and verify your distribution. The instructions in later sections of the chapter describe how to install the distribution that you choose. For binary distributions, see the instructions at Section 2.2, "Installing MySQL from Generic Binaries on Unix/Linux" or the corresponding section for your platform if available. To build MySQL from source, use the instructions in Section 2.3, "MySQL Installation Using a Source Distribution." 2.1.1. Operating Systems Supported by MySQL Community Server This section lists the operating systems on which MySQL Community Server is known to run. Important Oracle Corporation does not necessarily provide official support for all the platforms listed in this section. For information about those platforms that are officially supported, see http://www.mysql.com/support/supportedplatforms.html on the MySQL Web site. We use GNU Autoconf, so it is possible to port MySQL to all modern systems that have a C++ compiler and a working implementation of POSIX threads. (Thread support is needed for the server. To compile only the client code, the only requirement is a C++ compiler.) MySQL has been reported to compile successfully on the following combinations of operating system and thread package. * AIX 4.x, 5.x with native threads. See Section 2.12, "Installing MySQL on AIX." AIX 5.3 should be upgraded to technology level 7 (5300-07). * FreeBSD 5.x and up with native threads. See Section 2.10, "Installing MySQL on FreeBSD." * HP-UX 11.x with the native threads. See Section 2.11, "Installing MySQL on HP-UX." * Linux, builds on all fairly recent Linux distributions with glibc 2.3. See Section 2.6, "Installing MySQL on Linux." * Mac OS X. See Section 2.7, "Installing MySQL on Mac OS X." * Solaris 2.8 on SPARC and x86, including support for native threads. See Section 2.8.1, "Solaris Notes." * Windows 2000, Windows XP, Windows Vista, Windows Server 2003, and Windows Server 2008. See Section 2.5, "Installing MySQL on Windows." MySQL has also been known to run on other systems in the past. See Section 2.1, "General Installation Guidance." Some porting effort might be required for current versions of MySQL on these systems. Not all platforms are equally well-suited for running MySQL. How well a certain platform is suited for a high-load mission-critical MySQL server is determined by the following factors: * General stability of the thread library. A platform may have an excellent reputation otherwise, but MySQL is only as stable as the thread library it calls, even if everything else is perfect. * The capability of the kernel and the thread library to take advantage of symmetric multi-processor (SMP) systems. In other words, when a process creates a thread, it should be possible for that thread to run on a CPU different from the original process. * The capability of the kernel and the thread library to run many threads that acquire and release a mutex over a short critical region frequently without excessive context switches. If the implementation of pthread_mutex_lock() is too anxious to yield CPU time, this hurts MySQL tremendously. If this issue is not taken care of, adding extra CPUs actually makes MySQL slower. * General file system stability and performance. * Table size. If your tables are large, performance is affected by the ability of the file system to deal with large files and dealing with them efficiently. * Our level of expertise here at Oracle Corporation with the platform. If we know a platform well, we enable platform-specific optimizations and fixes at compile time. We can also provide advice on configuring your system optimally for MySQL. * The amount of testing we have done internally for similar configurations. * The number of users that have run MySQL successfully on the platform in similar configurations. If this number is high, the likelihood of encountering platform-specific surprises is much smaller. 2.1.2. Choosing Which MySQL Distribution to Install When preparing to install MySQL, you should decide which version to use. MySQL development occurs in several release series, and you can pick the one that best fits your needs. After deciding which version to install, you can choose a distribution format. Releases are available in binary or source format. 2.1.2.1. Choosing Which Version of MySQL to Install The first decision to make is whether you want to use a production (stable) release or a development release. In the MySQL development process, multiple release series co-exist, each at a different stage of maturity: * MySQL 5.5 is the current development release series. * MySQL 5.1 is the current General Availability (Production) release series. New releases are issued for bugfixes only; no new features are being added that could affect stability. * MySQL 5.0 is the previous stable (production-quality) release series. MySQL 5.0 is now at the end of the product lifecycle. Active development and support for this version has ended. Extended support for MySQL 5.0 remains available. According to the http://www.mysql.com/about/legal/lifecycle/, only Security and Severity Level 1 issues are still being fixed for MySQL 5.0. * MySQL 4.1, 4.0, and 3.23 are old stable (production-quality) release series. Active development and support for these versions has ended. We do not believe in a complete code freeze because this prevents us from making bugfixes and other fixes that must be done. By "somewhat frozen" we mean that we may add small things that should not affect anything that currently works in a production release. Naturally, relevant bugfixes from an earlier series propagate to later series. Normally, if you are beginning to use MySQL for the first time or trying to port it to some system for which there is no binary distribution, go with the General Availability release series. Currently, this is MySQL 5.1. All MySQL releases, even those from development series, are checked with the MySQL benchmarks and an extensive test suite before being issued. If you are running an older system and want to upgrade, but do not want to take the chance of having a nonseamless upgrade, you should upgrade to the latest version in the same release series you are using (where only the last part of the version number is newer than yours). We have tried to fix only fatal bugs and make only small, relatively "safe" changes to that version. If you want to use new features not present in the production release series, you can use a version from a development series. Note that development releases are not as stable as production releases. If you want to use the very latest sources containing all current patches and bugfixes, you can use one of our Bazaar repositories. These are not "releases" as such, but are available as previews of the code on which future releases are to be based. The MySQL naming scheme uses release names that consist of three numbers and a suffix; for example, mysql-5.0.14-rc. The numbers within the release name are interpreted as follows: * The first number (5) is the major version and describes the file format. All MySQL 5 releases have the same file format. * The second number (0) is the release level. Taken together, the major version and release level constitute the release series number. * The third number (14) is the version number within the release series. This is incremented for each new release. Usually you want the latest version for the series you have chosen. For each minor update, the last number in the version string is incremented. When there are major new features or minor incompatibilities with previous versions, the second number in the version string is incremented. When the file format changes, the first number is increased. Release names also include a suffix to indicates the stability level of the release. Releases within a series progress through a set of suffixes to indicate how the stability level improves. The possible suffixes are: * alpha indicates that the release is for preview purposes only. Known bugs should be documented in the News section (see Appendix C, "MySQL Change History"). Most alpha releases implement new commands and extensions. Active development that may involve major code changes can occur in an alpha release. However, we do conduct testing before issuing a release. * beta indicates that the release is appropriate for use with new development. Within beta releases, the features and compatibility should remain consistent. However, beta releases may contain numerous and major unaddressed bugs. All APIs, externally visible structures, and columns for SQL statements will not change during future beta, release candidate, or production releases. * rc indicates a Release Candidate. Release candidates are believed to be stable, having passed all of MySQL's internal testing, and with all known fatal runtime bugs fixed. However, the release has not been in widespread use long enough to know for sure that all bugs have been identified. Only minor fixes are added. (A release candidate is what formerly was known as a gamma release.) * If there is no suffix, it indicates that the release is a General Availability (GA) or Production release. GA releases are stable, having successfully passed through all earlier release stages and are believed to be reliable, free of serious bugs, and suitable for use in production systems. Only critical bugfixes are applied to the release. MySQL uses a naming scheme that is slightly different from most other products. In general, it is usually safe to use any version that has been out for a couple of weeks without being replaced by a new version within the same release series. All releases of MySQL are run through our standard tests and benchmarks to ensure that they are relatively safe to use. Because the standard tests are extended over time to check for all previously found bugs, the test suite keeps getting better. All releases have been tested at least with these tools: * An internal test suite The mysql-test directory contains an extensive set of test cases. We run these tests for every server binary. See Section 22.1.2, "MySQL Test Suite," for more information about this test suite. * The MySQL benchmark suite This suite runs a range of common queries. It is also a test to determine whether the latest batch of optimizations actually made the code faster. See Section 7.1.3, "The MySQL Benchmark Suite." We also test the newest MySQL version in our internal production environment, on at least one machine. We have more than 100GB of data to work with. 2.1.2.2. Choosing a Distribution Format After choosing which version of MySQL to install, you should decide whether to use a binary distribution or a source distribution. In most cases, you should probably use a binary distribution, if one exists for your platform. Binary distributions are available in native format for many platforms, such as RPM files for Linux or PKG package installers for Mac OS X or Solaris. Distributions also are available as Zip archives or compressed tar files. Reasons to choose a binary distribution include the following: * Binary distributions generally are easier to install than source distributions. * To satisfy different user requirements, we provide several servers in binary distributions. mysqld is an optimized server that is a smaller, faster binary. mysqld-debug is compiled with debugging support. Each of these servers is compiled from the same source distribution, though with different configuration options. All native MySQL clients can connect to servers from either MySQL version. Under some circumstances, you may be better off installing MySQL from a source distribution: * You want to install MySQL at some explicit location. The standard binary distributions are ready to run at any installation location, but you might require even more flexibility to place MySQL components where you want. * You want to configure mysqld to ensure that features are available that might not be included in the standard binary distributions. Here is a list of the most common extra options that you may want to use to ensure feature availability: + --with-libwrap + --with-named-z-libs (this is done for some of the binaries) + --with-debug[=full] * You want to configure mysqld without some features that are included in the standard binary distributions. For example, distributions normally are compiled with support for all character sets. If you want a smaller MySQL server, you can recompile it with support for only the character sets you need. * You have a special compiler (such as pgcc) or want to use compiler options that are better optimized for your processor. Binary distributions are compiled with options that should work on a variety of processors from the same processor family. * You want to use the latest sources from one of the Bazaar repositories to have access to all current bugfixes. For example, if you have found a bug and reported it to the MySQL development team, the bugfix is committed to the source repository and you can access it there. The bugfix does not appear in a release until a release actually is issued. * You want to read (or modify) the C and C++ code that makes up MySQL. For this purpose, you should get a source distribution, because the source code is always the ultimate manual. * Source distributions contain more tests and examples than binary distributions. 2.1.2.3. How and When Updates Are Released MySQL is evolving quite rapidly and we want to share new developments with other MySQL users. We try to produce a new release whenever we have new and useful features that others also seem to have a need for. We also try to help users who request features that are easy to implement. We take note of what our licensed users want, and we especially take note of what our support customers want and try to help them in this regard. No one is required to download a new release. The News section helps you determine whether the new release has something you really want. See Appendix C, "MySQL Change History." We use the following policy when updating MySQL: * Enterprise Server releases are meant to appear every 18 months, supplemented by quarterly service packs and monthly rapid updates. Community Server releases are meant to appear 2-3 times per year. * Releases are issued within each series. For each release, the last number in the version is one more than the previous release within the same series. * Binary distributions for some platforms are made by us for major releases. Other people may make binary distributions for other systems, but probably less frequently. * We make fixes available as soon as we have identified and corrected small or noncritical but annoying bugs. The fixes are available in source form immediately from our public Bazaar repositories, and are included in the next release. * If by any chance a security vulnerability or critical bug is found in a release, our policy is to fix it in a new release as soon as possible. (We would like other companies to do this, too!) 2.1.3. How to Get MySQL Check our downloads page at http://dev.mysql.com/downloads/ for information about the current version of MySQL and for downloading instructions. For a complete up-to-date list of MySQL download mirror sites, see http://dev.mysql.com/downloads/mirrors.html. You can also find information there about becoming a MySQL mirror site and how to report a bad or out-of-date mirror. Our main mirror is located at http://mirrors.sunsite.dk/mysql/. 2.1.4. Verifying Package Integrity Using MD5 Checksums or GnuPG After you have downloaded the MySQL package that suits your needs and before you attempt to install it, you should make sure that it is intact and has not been tampered with. There are three means of integrity checking: * MD5 checksums * Cryptographic signatures using GnuPG, the GNU Privacy Guard * For RPM packages, the built-in RPM integrity verification mechanism The following sections describe how to use these methods. If you notice that the MD5 checksum or GPG signatures do not match, first try to download the respective package one more time, perhaps from another mirror site. If you repeatedly cannot successfully verify the integrity of the package, please notify us about such incidents, including the full package name and the download site you have been using, at webmaster@mysql.com or build@mysql.com. Do not report downloading problems using the bug-reporting system. 2.1.4.1. Verifying the MD5 Checksum After you have downloaded a MySQL package, you should make sure that its MD5 checksum matches the one provided on the MySQL download pages. Each package has an individual checksum that you can verify with the following command, where package_name is the name of the package you downloaded: shell> md5sum package_name Example: shell> md5sum mysql-standard-5.1.46-linux-i686.tar.gz aaab65abbec64d5e907dcd41b8699945 mysql-standard-5.1.46-linux-i686.ta r.gz You should verify that the resulting checksum (the string of hexadecimal digits) matches the one displayed on the download page immediately below the respective package. Note Make sure to verify the checksum of the archive file (for example, the .zip or .tar.gz file) and not of the files that are contained inside of the archive. Note that not all operating systems support the md5sum command. On some, it is simply called md5, and others do not ship it at all. On Linux, it is part of the GNU Text Utilities package, which is available for a wide range of platforms. You can download the source code from http://www.gnu.org/software/textutils/ as well. If you have OpenSSL installed, you can use the command openssl md5 package_name instead. A Windows implementation of the md5 command line utility is available from http://www.fourmilab.ch/md5/. winMd5Sum is a graphical MD5 checking tool that can be obtained from http://www.nullriver.com/index/products/winmd5sum. 2.1.4.2. Signature Checking Using GnuPG Another method of verifying the integrity and authenticity of a package is to use cryptographic signatures. This is more reliable than using MD5 checksums, but requires more work. We sign MySQL downloadable packages with GnuPG (GNU Privacy Guard). GnuPG is an Open Source alternative to the well-known Pretty Good Privacy (PGP) by Phil Zimmermann. See http://www.gnupg.org/ for more information about GnuPG and how to obtain and install it on your system. Most Linux distributions ship with GnuPG installed by default. For more information about GnuPG, see http://www.openpgp.org/. To verify the signature for a specific package, you first need to obtain a copy of our public GPG build key, which you can download from http://keyserver.pgp.com/. The key that you want to obtain is named build@mysql.com. Alternatively, you can cut and paste the key directly from the following text: -----BEGIN PGP PUBLIC KEY BLOCK----- Version: GnuPG v1.4.5 (GNU/Linux) mQGiBD4+owwRBAC14GIfUfCyEDSIePvEW3SAFUdJBtoQHH/nJKZyQT7h9bPlUWC3 RODjQReyCITRrdwyrKUGku2FmeVGwn2u2WmDMNABLnpprWPkBdCk96+OmSLN9brZ fw2vOUgCmYv2hW0hyDHuvYlQA/BThQoADgj8AW6/0Lo7V1W9/8VuHP0gQwCgvzV3 BqOxRznNCRCRxAuAuVztHRcEAJooQK1+iSiunZMYD1WufeXfshc57S/+yeJkegNW hxwR9pRWVArNYJdDRT+rf2RUe3vpquKNQU/hnEIUHJRQqYHo8gTxvxXNQc7fJYLV K2HtkrPbP72vwsEKMYhhr0eKCbtLGfls9krjJ6sBgACyP/Vb7hiPwxh6rDZ7ITnE kYpXBACmWpP8NJTkamEnPCia2ZoOHODANwpUkP43I7jsDmgtobZX9qnrAXw+uNDI QJEXM6FSbi0LLtZciNlYsafwAPEOMDKpMqAK6IyisNtPvaLd8lH0bPAnWqcyefep rv0sxxqUEMcM3o7wwgfN83POkDasDbs3pjwPhxvhz6//62zQJ7Q7TXlTUUwgUGFj a2FnZSBzaWduaW5nIGtleSAod3d3Lm15c3FsLmNvbSkgPGJ1aWxkQG15c3FsLmNv bT6IXQQTEQIAHQULBwoDBAMVAwIDFgIBAheABQJLcC5lBQkQ8/JZAAoJEIxxjTtQ cuH1oD4AoIcOQ4EoGsZvy06D0Ei5vcsWEy8dAJ4g46i3WEcdSWxMhcBSsPz65sh5 lohMBBMRAgAMBQI+PqPRBYMJZgC7AAoJEElQ4SqycpHyJOEAn1mxHijft00bKXvu cSo/pECUmppiAJ41M9MRVj5VcdH/KN/KjRtW6tHFPYhMBBMRAgAMBQI+QoIDBYMJ YiKJAAoJELb1zU3GuiQ/lpEAoIhpp6BozKI8p6eaabzF5MlJH58pAKCu/ROofK8J Eg2aLos+5zEYrB/LsrkCDQQ+PqMdEAgA7+GJfxbMdY4wslPnjH9rF4N2qfWsEN/l xaZoJYc3a6M02WCnHl6ahT2/tBK2w1QI4YFteR47gCvtgb6O1JHffOo2HfLmRDRi Rjd1DTCHqeyX7CHhcghj/dNRlW2Z0l5QFEcmV9U0Vhp3aFfWC4Ujfs3LU+hkAWzE 7zaD5cH9J7yv/6xuZVw411x0h4UqsTcWMu0iM1BzELqX1DY7LwoPEb/O9Rkbf4fm Le11EzIaCa4PqARXQZc4dhSinMt6K3X4BrRsKTfozBu74F47D8Ilbf5vSYHbuE5p /1oIDznkg/p8kW+3FxuWrycciqFTcNz215yyX39LXFnlLzKUb/F5GwADBQf+Lwqq a8CGrRfsOAJxim63CHfty5mUc5rUSnTslGYEIOCR1BeQauyPZbPDsDD9MZ1ZaSaf anFvwFG6Llx9xkU7tzq+vKLoWkm4u5xf3vn55VjnSd1aQ9eQnUcXiL4cnBGoTbOW I39EcyzgslzBdC++MPjcQTcA7p6JUVsP6oAB3FQWg54tuUo0Ec8bsM8b3Ev42Lmu QT5NdKHGwHsXTPtl0klk4bQk4OajHsiy1BMahpT27jWjJlMiJc+IWJ0mghkKHt92 6s/ymfdf5HkdQ1cyvsz5tryVI3Fx78XeSYfQvuuwqp2H139pXGEkg0n6KdUOetdZ Whe70YGNPw1yjWJT1IhMBBgRAgAMBQI+PqMdBQkJZgGAAAoJEIxxjTtQcuH17p4A n3r1QpVC9yhnW2cSAjq+kr72GX0eAJ4295kl6NxYEuFApmr1+0uUq/SlsQ== =Mski -----END PGP PUBLIC KEY BLOCK----- To import the build key into your personal public GPG keyring, use gpg --import. For example, if you have saved the key in a file named mysql_pubkey.asc, the import command looks like this: shell> gpg --import mysql_pubkey.asc gpg: key 5072E1F5: public key "MySQL Package signing key (www.mysql.c om) " imported gpg: Total number processed: 1 gpg: imported: 1 gpg: no ultimately trusted keys found You can also download the key from the public keyserver using the public key id, 5072E1F5: shell> gpg --recv-keys 5072E1F5 gpg: requesting key 5072E1F5 from hkp server subkeys.pgp.net gpg: key 5072E1F5: "MySQL Package signing key (www.mysql.com) " 2 new signatures gpg: no ultimately trusted keys found gpg: Total number processed: 1 gpg: new signatures: 2 If you want to import the key into your RPM configuration to validate RPM install packages, you should be able to import the key directly: shell> rpm --import mysql_pubkey.asc If you experience problems, try exporting the key from gpg and importing: shell> gpg --export -a 5072e1f5 > 5072e1f5.asc shell> rpm --import 5072e1f5.asc Alternatively, rpm also supports loading the key directly from a URL, and you cas use this manual page: shell> rpm --import http://dev.mysql.com/doc/refman/5.1/en/checking-g pg-signature.html After you have downloaded and imported the public build key, download your desired MySQL package and the corresponding signature, which also is available from the download page. The signature file has the same name as the distribution file with an .asc extension, as shown by the examples in the following table. Distribution file mysql-standard-5.1.46-linux-i686.tar.gz Signature file mysql-standard-5.1.46-linux-i686.tar.gz.asc Make sure that both files are stored in the same directory and then run the following command to verify the signature for the distribution file: shell> gpg --verify package_name.asc Example: shell> gpg --verify mysql-standard-5.1.46-linux-i686.tar.gz.asc gpg: Signature made Tue 12 Jul 2005 23:35:41 EST using DSA key ID 507 2E1F5 gpg: Good signature from "MySQL Package signing key (www.mysql.com) < build@mysql.com>" The Good signature message indicates that everything is all right. You can ignore any insecure memory warning you might obtain. See the GPG documentation for more information on how to work with public keys. 2.1.4.3. Signature Checking Using RPM For RPM packages, there is no separate signature. RPM packages have a built-in GPG signature and MD5 checksum. You can verify a package by running the following command: shell> rpm --checksig package_name.rpm Example: shell> rpm --checksig MySQL-server-5.1.46-0.glibc23.i386.rpm MySQL-server-5.1.46-0.glibc23.i386.rpm: md5 gpg OK Note If you are using RPM 4.1 and it complains about (GPG) NOT OK (MISSING KEYS: GPG#5072e1f5), even though you have imported the MySQL public build key into your own GPG keyring, you need to import the key into the RPM keyring first. RPM 4.1 no longer uses your personal GPG keyring (or GPG itself). Rather, it maintains its own keyring because it is a system-wide application and a user's GPG public keyring is a user-specific file. To import the MySQL public key into the RPM keyring, first obtain the key as described in Section 2.1.4.2, "Signature Checking Using GnuPG." Then use rpm --import to import the key. For example, if you have saved the public key in a file named mysql_pubkey.asc, import it using this command: shell> rpm --import mysql_pubkey.asc If you need to obtain the MySQL public key, see Section 2.1.4.2, "Signature Checking Using GnuPG." 2.1.5. Installation Layouts This section describes the default layout of the directories created by installing binary or source distributions provided by Oracle Corporation. A distribution provided by another vendor might use a layout different from those shown here. Installations created from our Linux RPM distributions result in files under the following system directories. Directory Contents of Directory /usr/bin Client programs and scripts /usr/sbin The mysqld server /var/lib/mysql Log files, databases /usr/share/info Manual in Info format /usr/share/man Unix manual pages /usr/include/mysql Include (header) files /usr/lib/mysql Libraries /usr/share/mysql Error message and character set files /usr/share/sql-bench Benchmarks On Unix, a tar file binary distribution is installed by unpacking it at the installation location you choose (typically /usr/local/mysql) and creates the following directories in that location. Directory Contents of Directory bin Client programs and the mysqld server data Log files, databases docs Manual in Info format man Unix manual pages include Include (header) files lib Libraries scripts mysql_install_db share/mysql Error message files sql-bench Benchmarks A source distribution is installed after you configure and compile it. By default, the installation step installs files under /usr/local, in the following subdirectories. Directory Contents of Directory bin Client programs and scripts include/mysql Include (header) files Docs Manual in Info, CHM formats man Unix manual pages lib/mysql Libraries libexec The mysqld server share/mysql Error message files sql-bench Benchmarks and crash-me test var Databases and log files Within its installation directory, the layout of a source installation differs from that of a binary installation in the following ways: * The mysqld server is installed in the libexec directory rather than in the bin directory. * The data directory is var rather than data. * mysql_install_db is installed in the bin directory rather than in the scripts directory. * The header file and library directories are include/mysql and lib/mysql rather than include and lib. You can create your own binary installation from a compiled source distribution by executing the scripts/make_binary_distribution script from the top directory of the source distribution. 2.2. Installing MySQL from Generic Binaries on Unix/Linux This section covers the installation of MySQL binary distributions that are provided for various platforms in the form of compressed tar files (files with a .tar.gz extension). To obtain MySQL, see Section 2.1.3, "How to Get MySQL." Sun Microsystems, Inc. provides a set of binary distributions of MySQL. In addition to binaries provided in platform-specific package formats, we offer binary distributions for a number of platforms in the form of compressed tar files (.tar.gz files). For Windows distributions, see Section 2.5, "Installing MySQL on Windows." If you want to compile a debug version of MySQL from a source distribution, you should add --with-debug or --with-debug=full to the configure command used to configure the distribution and remove any -fomit-frame-pointer options. MySQL tar file binary distributions have names of the form mysql-VERSION-OS.tar.gz, where VERSION is a number (for example, 5.1.46), and OS indicates the type of operating system for which the distribution is intended (for example, pc-linux-i686). In addition to these generic packages, we also offer binaries in platform-specific package formats for selected platforms. See the platform specific sections for more information, for more information on how to install these. You need the following tools to install a MySQL tar file binary distribution: * GNU gunzip to uncompress the distribution. * A reasonable tar to unpack the distribution. GNU tar is known to work. Some operating systems come with a preinstalled version of tar that is known to have problems. For example, the tar provided with early versions of Mac OS X, SunOS 4.x, Solaris 8, Solaris 9, Solaris 10 and OpenSolaris, and HP-UX are known to have problems with long file names. On Mac OS X, you can use the preinstalled gnutar program. On Solaris 10 and OpenSolaris you can use the preinstalled gtar. On other systems with a deficient tar, you should install GNU tar first. If you run into problems and need to file a bug report, please use the instructions in Section 1.7, "How to Report Bugs or Problems." The basic commands that you must execute to install and use a MySQL binary distribution are: shell> groupadd mysql shell> useradd -g mysql mysql shell> cd /usr/local shell> gunzip < /path/to/mysql-VERSION-OS.tar.gz | tar xvf - shell> ln -s full-path-to-mysql-VERSION-OS mysql shell> cd mysql shell> chown -R mysql . shell> chgrp -R mysql . shell> scripts/mysql_install_db --user=mysql shell> chown -R root . shell> chown -R mysql data shell> bin/mysqld_safe --user=mysql & Note This procedure does not set up any passwords for MySQL accounts. After following the procedure, proceed to Section 2.13, "Post-Installation Setup and Testing." A more detailed version of the preceding description for installing a binary distribution follows: 1. Add a login user and group for mysqld to run as: shell> groupadd mysql shell> useradd -g mysql mysql These commands add the mysql group and the mysql user. The syntax for useradd and groupadd may differ slightly on different versions of Unix, or they may have different names such as adduser and addgroup. You might want to call the user and group something else instead of mysql. If so, substitute the appropriate name in the following steps. 2. Pick the directory under which you want to unpack the distribution and change location into it. In the following example, we unpack the distribution under /usr/local. (The instructions, therefore, assume that you have permission to create files and directories in /usr/local. If that directory is protected, you must perform the installation as root.) shell> cd /usr/local 3. Obtain a distribution file using the instructions in Section 2.1.3, "How to Get MySQL." For a given release, binary distributions for all platforms are built from the same MySQL source distribution. 4. Unpack the distribution, which creates the installation directory. Then create a symbolic link to that directory: shell> gunzip < /path/to/mysql-VERSION-OS.tar.gz | tar xvf - shell> ln -s full-path-to-mysql-VERSION-OS mysql The tar command creates a directory named mysql-VERSION-OS. The ln command makes a symbolic link to that directory. This lets you refer more easily to the installation directory as /usr/local/mysql. With GNU tar, no separate invocation of gunzip is necessary. You can replace the first line with the following alternative command to uncompress and extract the distribution: shell> tar zxvf /path/to/mysql-VERSION-OS.tar.gz 5. Change location into the installation directory: shell> cd mysql You will find several files and subdirectories in the mysql directory. The most important for installation purposes are the bin and scripts subdirectories: + The bin directory contains client programs and the server. You should add the full path name of this directory to your PATH environment variable so that your shell finds the MySQL programs properly. See Section 2.14, "Environment Variables." + The scripts directory contains the mysql_install_db script used to initialize the mysql database containing the grant tables that store the server access permissions. 6. Ensure that the distribution contents are accessible to mysql. If you unpacked the distribution as mysql, no further action is required. If you unpacked the distribution as root, its contents will be owned by root. Change its ownership to mysql by executing the following commands as root in the installation directory: shell> chown -R mysql . shell> chgrp -R mysql . The first command changes the owner attribute of the files to the mysql user. The second changes the group attribute to the mysql group. 7. If you have not installed MySQL before, you must create the MySQL data directory and initialize the grant tables: shell> scripts/mysql_install_db --user=mysql If you run the command as root, include the --user option as shown. If you run the command while logged in as that user, you can omit the --user option. The command should create the data directory and its contents with mysql as the owner. After creating or updating the grant tables, you need to restart the server manually. 8. Most of the MySQL installation can be owned by root if you like. The exception is that the data directory must be owned by mysql. To accomplish this, run the following commands as root in the installation directory: shell> chown -R root . shell> chown -R mysql data 9. If you want MySQL to start automatically when you boot your machine, you can copy support-files/mysql.server to the location where your system has its startup files. More information can be found in the support-files/mysql.server script itself and in Section 2.13.1.2, "Starting and Stopping MySQL Automatically." 10. You can set up new accounts using the bin/mysql_setpermission script if you install the DBI and DBD::mysql Perl modules. See Section 4.6.14, "mysql_setpermission --- Interactively Set Permissions in Grant Tables." For Perl module installation instructions, see Section 2.15, "Perl Installation Notes." 11. If you would like to use mysqlaccess and have the MySQL distribution in some nonstandard location, you must change the location where mysqlaccess expects to find the mysql client. Edit the bin/mysqlaccess script at approximately line 18. Search for a line that looks like this: $MYSQL = '/usr/local/bin/mysql'; # path to mysql executable Change the path to reflect the location where mysql actually is stored on your system. If you do not do this, a Broken pipe error will occur when you run mysqlaccess. After everything has been unpacked and installed, you should test your distribution. To start the MySQL server, use the following command: shell> bin/mysqld_safe --user=mysql & If you run the command as root, you must use the --user option as shown. The value of the option is the name of the login account that you created in the first step to use for running the server. If you run the command while logged in as mysql, you can omit the --user option. If the command fails immediately and prints mysqld ended, you can find some information in the host_name.err file in the data directory. More information about mysqld_safe is given in Section 4.3.2, "mysqld_safe --- MySQL Server Startup Script." Note The accounts that are listed in the MySQL grant tables initially have no passwords. After starting the server, you should set up passwords for them using the instructions in Section 2.13, "Post-Installation Setup and Testing." 2.3. MySQL Installation Using a Source Distribution Before you proceed with an installation from source, first check whether our binary is available for your platform and whether it works for you. We put a great deal of effort into ensuring that our binaries are built with the best possible options. To obtain a source distribution for MySQL, Section 2.1.3, "How to Get MySQL." If you want to build MySQL from source on Windows, see Section 2.5.10, "Installing MySQL from Source on Windows." MySQL source distributions are provided as compressed tar archives and have names of the form mysql-VERSION.tar.gz, where VERSION is a number like 5.1.46. You need the following tools to build and install MySQL from source: * GNU gunzip to uncompress the distribution. * A reasonable tar to unpack the distribution. GNU tar is known to work. Some operating systems come with a preinstalled version of tar that is known to have problems. For example, the tar provided with early versions of Mac OS X, SunOS 4.x, Solaris 8, Solaris 9, Solaris 10 and OpenSolaris, and HP-UX are known to have problems with long file names. On Mac OS X, you can use the preinstalled gnutar program. On Solaris 10 and OpenSolaris you can use the preinstalled gtar. On other systems with a deficient tar, you should install GNU tar first. * A working ANSI C++ compiler. GCC 3.2 or later, Sun Studio 10 or later, Visual Studio 2005 or later, and many current vendor-supplied compilers are known to work. * A good make program. GNU make is always recommended and is sometimes required. (BSD make fails, and vendor-provided make implementations may fail as well.) If you have problems, use GNU make 3.75 or newer. * libtool 1.5.24 or later is also recommended. If you are using a version of gcc recent enough to understand the -fno-exceptions option, it is very important that you use this option. Otherwise, you may compile a binary that crashes randomly. Also use -felide-constructors and -fno-rtti along with -fno-exceptions. When in doubt, do the following: CFLAGS="-O3" CXX=gcc CXXFLAGS="-O3 -felide-constructors \ -fno-exceptions -fno-rtti" ./configure \ --prefix=/usr/local/mysql --enable-assembler \ --with-mysqld-ldflags=-all-static On most systems, this gives you a fast and stable binary. If you run into problems and need to file a bug report, please use the instructions in Section 1.7, "How to Report Bugs or Problems." 2.3.1. Source Installation Overview The basic commands that you must execute to install a MySQL source distribution are: shell> groupadd mysql shell> useradd -g mysql mysql shell> gunzip < mysql-VERSION.tar.gz | tar -xvf - shell> cd mysql-VERSION shell> ./configure --prefix=/usr/local/mysql shell> make shell> make install shell> cp support-files/my-medium.cnf /etc/my.cnf shell> cd /usr/local/mysql shell> chown -R mysql . shell> chgrp -R mysql . shell> bin/mysql_install_db --user=mysql shell> chown -R root . shell> chown -R mysql var shell> bin/mysqld_safe --user=mysql & If you start from a source RPM, do the following: shell> rpmbuild --rebuild --clean MySQL-VERSION.src.rpm This makes a binary RPM that you can install. For older versions of RPM, you may have to replace the command rpmbuild with rpm instead. Note This procedure does not set up any passwords for MySQL accounts. After following the procedure, proceed to Section 2.13, "Post-Installation Setup and Testing," for post-installation setup and testing. A more detailed version of the preceding description for installing MySQL from a source distribution follows: 1. Add a login user and group for mysqld to run as: shell> groupadd mysql shell> useradd -g mysql mysql These commands add the mysql group and the mysql user. The syntax for useradd and groupadd may differ slightly on different versions of Unix, or they may have different names such as adduser and addgroup. You might want to call the user and group something else instead of mysql. If so, substitute the appropriate name in the following steps. 2. Perform the following steps as the mysql user, except as noted. 3. Pick the directory under which you want to unpack the distribution and change location into it. 4. Obtain a distribution file using the instructions in Section 2.1.3, "How to Get MySQL." 5. Unpack the distribution into the current directory: shell> gunzip < /path/to/mysql-VERSION.tar.gz | tar xvf - This command creates a directory named mysql-VERSION. With GNU tar, no separate invocation of gunzip is necessary. You can use the following alternative command to uncompress and extract the distribution: shell> tar zxvf /path/to/mysql-VERSION-OS.tar.gz 6. Change location into the top-level directory of the unpacked distribution: shell> cd mysql-VERSION Note that currently you must configure and build MySQL from this top-level directory. You cannot build it in a different directory. 7. Configure the release and compile everything: shell> ./configure --prefix=/usr/local/mysql shell> make When you run configure, you might want to specify other options. Run ./configure --help for a list of options. Section 2.3.2, "Typical configure Options," discusses some of the more useful options. If configure fails and you are going to send mail to a MySQL mailing list to ask for assistance, please include any lines from config.log that you think can help solve the problem. Also include the last couple of lines of output from configure. To file a bug report, please use the instructions in Section 1.7, "How to Report Bugs or Problems." If the compile fails, see Section 2.3.4, "Dealing with Problems Compiling MySQL," for help. 8. Install the distribution: shell> make install You might need to run this command as root. If you want to set up an option file, use one of those present in the support-files directory as a template. For example: shell> cp support-files/my-medium.cnf /etc/my.cnf You might need to run this command as root. If you want to configure support for InnoDB tables, you should edit the /etc/my.cnf file, remove the # character before the option lines that start with innodb_..., and modify the option values to be what you want. See Section 4.2.3.3, "Using Option Files," and Section 13.6.2, "InnoDB Configuration." 9. Change location into the installation directory: shell> cd /usr/local/mysql 10. If you ran the make install command as root, the installed files will be owned by root. Ensure that the installation is accessible to mysql by executing the following commands as root in the installation directory: shell> chown -R mysql . shell> chgrp -R mysql . The first command changes the owner attribute of the files to the mysql user. The second changes the group attribute to the mysql group. 11. If you have not installed MySQL before, you must create the MySQL data directory and initialize the grant tables: shell> bin/mysql_install_db --user=mysql If you run the command as root, include the --user option as shown. If you run the command while logged in as mysql, you can omit the --user option. The command should create the data directory and its contents with mysql as the owner. After using mysql_install_db to create the grant tables for MySQL, you must restart the server manually. The mysqld_safe command to do this is shown in a later step. 12. Most of the MySQL installation can be owned by root if you like. The exception is that the data directory must be owned by mysql. To accomplish this, run the following commands as root in the installation directory: shell> chown -R root . shell> chown -R mysql var 13. If you want MySQL to start automatically when you boot your machine, you can copy support-files/mysql.server to the location where your system has its startup files. More information can be found in the support-files/mysql.server script itself; see also Section 2.13.1.2, "Starting and Stopping MySQL Automatically." 14. You can set up new accounts using the bin/mysql_setpermission script if you install the DBI and DBD::mysql Perl modules. See Section 4.6.14, "mysql_setpermission --- Interactively Set Permissions in Grant Tables." For Perl module installation instructions, see Section 2.15, "Perl Installation Notes." After everything has been installed, you should test your distribution. To start the MySQL server, use the following command: shell> /usr/local/mysql/bin/mysqld_safe --user=mysql & If you run the command as root, you should use the --user option as shown. The value of the option is the name of the login account that you created in the first step to use for running the server. If you run the command while logged in as that user, you can omit the --user option. If the command fails immediately and prints mysqld ended, you can find some information in the host_name.err file in the data directory. More information about mysqld_safe is given in Section 4.3.2, "mysqld_safe --- MySQL Server Startup Script." Note The accounts that are listed in the MySQL grant tables initially have no passwords. After starting the server, you should set up passwords for them using the instructions in Section 2.13, "Post-Installation Setup and Testing." 2.3.2. Typical configure Options The configure script gives you a great deal of control over how you configure a MySQL source distribution. Typically you do this using options on the configure command line. You can also affect configure using certain environment variables. See Section 2.14, "Environment Variables." For a full list of options supported by configure, run this command: shell> ./configure --help A list of the available configure options is provided in the table below. Table 2.1. Build (configure) Reference Formats Description Default Introduced Removed --bindir=DIR User executables EPREFIX/bin --build=BUILD Configure for building on BUILD guessed --cache-file=FILE Cache test results in FILE disabled -C Alias for `--cache-file=config.cache' --config-cache --datadir=DIR Read-only architecture-independent data PREFIX/share --disable-FEATURE Do not include FEATURE --disable-dependency-tracking Disable dependency tracking --disable-grant-options Disable GRANT options --disable-largefile Omit support for large files --disable-libtool-lock Disable libtool lock --disable-thread-safe-client Compile the client without threads 5.1.7 --enable-FEATURE Enable FEATURE --enable-assembler Use assembler versions of some string functions if available --enable-debug-sync Compile in Debug Sync facility 5.1.41 --enable-dependency-tracking Do not reject slow dependency extractors --enable-fast-install Optimize for fast installation yes --enable-local-infile Enable LOAD DATA LOCAL INFILE disabled --enable-shared Build shared libraries yes --enable-static Build static libraries yes --enable-thread-safe-client Compile the client with threads --exec-prefix=EPREFIX Install architecture-dependent files in EPREFIX -h Display this help and exit --help --help=short Display options specific to this package --help=recursive Display the short help of all the included packages --host=HOST Cross-compile to build programs to run on HOST --includedir=DIR C header files PREFIX/include --infodir=DIR Info documentation PREFIX/info --libdir=DIR Object code libraries EPREFIX/lib --libexecdir=DIR Program executables EPREFIX/libexec --localstatedir=DIR Modifiable single-machine data PREFIX/var --mandir=DIR man documentation PREFIX/man -n Do not create output files --no-create --oldincludedir=DIR C header files for non-gcc /usr/include --prefix=PREFIX Install architecture-independent files in PREFIX --program-prefix=PREFIX Prepend PREFIX to installed program names --program-suffix=SUFFIX Append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names -q Do not print `checking...' messages --quiet --sbindir=DIR System admin executables EPREFIX/sbin --sharedstatedir=DIR Modifiable architecture-independent data PREFIX/com --srcdir=DIR Find the sources in DIR configure directory or .. --sysconfdir=DIR Read-only single-machine data PREFIX/etc --target=TARGET Configure for building compilers for TARGET -V Display version information and exit --version --with-PACKAGE Use PACKAGE --with-archive-storage-engine Enable the Archive Storage Engine no --with-atomic-ops Implement atomic operations using pthread rwlocks or atomic CPU instructions for multi-processor 5.1.12 --with-berkeley-db Use BerkeleyDB located in DIR no --with-berkeley-db-includes Find Berkeley DB headers in DIR --with-berkeley-db-libs Find Berkeley DB libraries in DIR --with-big-tables Support tables with more than 4 G rows even on 32 bit platforms --with-blackhole-storage-engine Enable the Blackhole Storage Engine no --with-charset Default character set --with-client-ldflags Extra linking arguments for clients --with-collation Default collation --with-comment Comment about compilation environment --with-csv-storage-engine Enable the CSV Storage Engine yes --with-darwin-mwcc Use Metrowerks CodeWarrior wrappers on OS X/Darwin --with-debug Add debug code 5.1.7 --with-debug=full Add debug code (adds memory checker, very slow) --with-embedded-privilege-control Build parts to check user's privileges (only affects embedded library) --with-embedded-server Build the embedded server --with-error-inject Enable error injection in MySQL Server 5.1.11 --with-example-storage-engine Enable the Example Storage Engine no --with-extra-charsets Use charsets in addition to default --with-fast-mutexes Compile with fast mutexes enabled 5.1.5 --with-federated-storage-engine Enable federated storage engine no 5.1.3 5.1.9 --with-gnu-ld Assume the C compiler uses GNU ld no --with-innodb Enable innobase storage engine no 5.1.3 5.1.9 --with-lib-ccflags Extra CC options for libraries --with-libwrap=DIR Compile in libwrap (tcp_wrappers) support --with-low-memory Try to use less memory to compile to avoid memory limitations --with-machine-type Set the machine type, like "powerpc" --with-max-indexes=N Sets the maximum number of indexes per table 64 --with-mysqld-ldflags Extra linking arguments for mysqld --with-mysqld-libs Extra libraries to link with for mysqld --with-mysqld-user What user the mysqld daemon shall be run as --with-mysqlmanager Build the mysqlmanager binary Build if server is built --with-named-curses-libs Use specified curses libraries --with-named-thread-libs Use specified thread libraries --with-ndb-ccflags Extra CC options for ndb compile --with-ndb-docs Include the NDB Cluster ndbapi and mgmapi documentation --with-ndb-port Port for NDB Cluster management server --with-ndb-port-base Port for NDB Cluster management server --with-ndb-sci=DIR Provide MySQL with a custom location of sci library --with-ndb-test Include the NDB Cluster ndbapi test programs --with-ndbcluster Include the NDB Cluster table handler no --with-openssl=DIR Include the OpenSSL support --with-openssl-includes Find OpenSSL headers in DIR --with-openssl-libs Find OpenSSL libraries in DIR --with-other-libc=DIR Link against libc and other standard libraries installed in the specified nonstandard location --with-pic Try to use only PIC/non-PIC objects Use both --with-plugin-PLUGIN Forces the named plugin to be linked into mysqld statically 5.1.11 --with-plugins Plugins to include in mysqld none 5.1.11 --with-pstack Use the pstack backtrace library --with-pthread Force use of pthread library --with-row-based-replication Include row-based replication 5.1.5 5.1.6 --with-server-suffix Append value to the version string --with-ssl=DIR Include SSL support 5.1.11 --with-system-type Set the system type, like "sun-solaris10" --with-tags Include additional configurations automatic --with-tcp-port Which port to use for MySQL services 3306 --with-unix-socket-path Where to put the unix-domain socket --with-yassl Include the yaSSL support --with-zlib-dir=no|bundled|DIR Provide MySQL with a custom location of compression library --without-PACKAGE Do not use PACKAGE --without-bench Skip building of the benchmark suite --without-debug Build a production version without debugging code --without-docs Skip building of the documentation --without-extra-tools Skip building utilities in the tools directory --without-geometry Do not build geometry-related parts --without-libedit Use system libedit instead of bundled copy --without-man Skip building of the man pages --without-ndb-binlog Disable ndb binlog 5.1.6 --without-ndb-debug Disable special ndb debug features --without-plugin-PLUGIN Exclude PLUGIN 5.1.11 --without-query-cache Do not build query cache --without-readline Use system readline instead of bundled copy --without-row-based-replication Don't include row-based replication 5.1.7 5.1.14 --without-server Only build the client --without-uca Skip building of the national Unicode collations Some of the configure options available are described here. For options that may be of use if you have difficulties building MySQL, see Section 2.3.4, "Dealing with Problems Compiling MySQL." * To compile just the MySQL client libraries and client programs and not the server, use the --without-server option: shell> ./configure --without-server If you have no C++ compiler, some client programs such as mysql cannot be compiled because they require C++.. In this case, you can remove the code in configure that tests for the C++ compiler and then run ./configure with the --without-server option. The compile step should still try to build all clients, but you can ignore any warnings about files such as mysql.cc. (If make stops, try make -k to tell it to continue with the rest of the build even if errors occur.) * If you want to build the embedded MySQL library (libmysqld.a), use the --with-embedded-server option. * If you don't want your log files and database directories located under /usr/local/var, use a configure command something like one of these: shell> ./configure --prefix=/usr/local/mysql shell> ./configure --prefix=/usr/local \ --localstatedir=/usr/local/mysql/data The first command changes the installation prefix so that everything is installed under /usr/local/mysql rather than the default of /usr/local. The second command preserves the default installation prefix, but overrides the default location for database directories (normally /usr/local/var) and changes it to /usr/local/mysql/data. You can also specify the installation directory and data directory locations at server startup time by using the --basedir and --datadir options. These can be given on the command line or in an MySQL option file, although it is more common to use an option file. See Section 4.2.3.3, "Using Option Files." * This option specifies the port number on which the server listens for TCP/IP connections. The default is port 3306. To listen on a different port, use a configure command like this: shell> ./configure --with-tcp-port=3307 * If you are using Unix and you want the MySQL socket file location to be somewhere other than the default location (normally in the directory /tmp or /var/run), use a configure command like this: shell> ./configure \ --with-unix-socket-path=/usr/local/mysql/tmp/mysql.sock The socket file name must be an absolute path name. You can also change the location of mysql.sock at server startup by using a MySQL option file. See Section B.5.4.5, "How to Protect or Change the MySQL Unix Socket File." * If you want to compile statically linked programs (for example, to make a binary distribution, to get better performance, or to work around problems with some Red Hat Linux distributions), run configure like this: shell> ./configure --with-client-ldflags=-all-static \ --with-mysqld-ldflags=-all-static * If you are using gcc and don't have libg++ or libstdc++ installed, you can tell configure to use gcc as your C++ compiler: shell> CC=gcc CXX=gcc ./configure When you use gcc as your C++ compiler, it does not attempt to link in libg++ or libstdc++. This may be a good thing to do even if you have those libraries installed. Some versions of them have caused strange problems for MySQL users in the past. The following list indicates some compilers and environment variable settings that are commonly used with each one. + gcc 2.7.2: CC=gcc CXX=gcc CXXFLAGS="-O3 -felide-constructors" + gcc 2.95.2: CFLAGS="-O3 -mpentiumpro" CXX=gcc CXXFLAGS="-O3 -mpentiumpro \ -felide-constructors -fno-exceptions -fno-rtti" + pgcc 2.90.29 or newer: CFLAGS="-O3 -mpentiumpro -mstack-align-double" CXX=gcc \ CXXFLAGS="-O3 -mpentiumpro -mstack-align-double \ -felide-constructors -fno-exceptions -fno-rtti" In most cases, you can get a reasonably optimized MySQL binary by using the options from the preceding list and adding the following options to the configure line: --prefix=/usr/local/mysql --enable-assembler \ --with-mysqld-ldflags=-all-static The full configure line would, in other words, be something like the following for all recent gcc versions: CFLAGS="-O3 -mpentiumpro" CXX=gcc CXXFLAGS="-O3 -mpentiumpro \ -felide-constructors -fno-exceptions -fno-rtti" ./configure \ --prefix=/usr/local/mysql --enable-assembler \ --with-mysqld-ldflags=-all-static The binaries we provide on the MySQL Web site at http://dev.mysql.com/downloads/ are all compiled with full optimization and should be perfect for most users. See Section 2.2, "Installing MySQL from Generic Binaries on Unix/Linux." There are some configuration settings you can tweak to build an even faster binary, but these are only for advanced users. See Section 7.5.1, "How Compiling and Linking Affects the Speed of MySQL." If the build fails and produces errors about your compiler or linker not being able to create the shared library libmysqlclient.so.N (where N is a version number), you can work around this problem by giving the --disable-shared option to configure. In this case, configure does not build a shared libmysqlclient.so.N library. * By default, MySQL uses the latin1 (cp1252 West European) character set. To change the default set, use the --with-charset option: shell> ./configure --with-charset=CHARSET CHARSET may be one of binary, armscii8, ascii, big5, cp1250, cp1251, cp1256, cp1257, cp850, cp852, cp866, cp932, dec8, eucjpms, euckr, gb2312, gbk, geostd8, greek, hebrew, hp8, keybcs2, koi8r, koi8u, latin1, latin2, latin5, latin7, macce, macroman, sjis, swe7, tis620, ucs2, ujis, utf8. (Additional character sets might be available. Check the output from ./configure --help for the current list.) The default collation may also be specified. MySQL uses the latin1_swedish_ci collation by default. To change this, use the --with-collation option: shell> ./configure --with-collation=COLLATION To change both the character set and the collation, use both the --with-charset and --with-collation options. The collation must be a legal collation for the character set. (Use the SHOW COLLATION statement to determine which collations are available for each character set.) With the configure option --with-extra-charsets=LIST, you can define which additional character sets should be compiled into the server. LIST is one of the following: + A list of character set names separated by spaces + complex to include all character sets that can't be dynamically loaded + all to include all character sets into the binaries Clients that want to convert characters between the server and the client should use the SET NAMES statement. See Section 5.1.5, "Session System Variables," and Section 9.1.4, "Connection Character Sets and Collations." * To configure MySQL with debugging code, use the --with-debug option: shell> ./configure --with-debug This causes a safe memory allocator to be included that can find some errors and that provides output about what is happening. See MySQL Internals: Porting (http://forge.mysql.com/wiki/MySQL_Internals_Porting). As of MySQL 5.1.12, using --with-debug to configure MySQL with debugging support enables you to use the --debug="d,parser_debug" option when you start the server. This causes the Bison parser that is used to process SQL statements to dump a parser trace to the server's standard error output. Typically, this output is written to the error log. * To cause the Debug Sync facility to be compiled into the server, use the --enable-debug-sync option. This facility is used for testing and debugging. When compiled in, Debug Sync is disabled by default. To enable it, start mysqld with the --debug-sync-timeout=N option, where N is a timeout value greater than 0. (The default value is 0, which disables Debug Sync.) N becomes the default timeout for individual synchronization points. Debug Sync is also compiled in if you configure with the --with-debug option (which implies --enable-debug-sync), unless you also use the --disable-debug-sync option. For a description of the Debug Sync facility and how to use synchronization points, see MySQL Internals: Test Synchronization (http://forge.mysql.com/wiki/MySQL_Internals_Test_Synchronizat ion). The --enable-debug-sync and --disable-debug-sync options were added in MySQL 5.1.41. * If your client programs are using threads, you must compile a thread-safe version of the MySQL client library with the --enable-thread-safe-client configure option. This creates a libmysqlclient_r library with which you should link your threaded applications. See Section 21.9.16.2, "How to Make a Threaded Client." * Some features require that the server be built with compression library support, such as the COMPRESS() and UNCOMPRESS() functions, and compression of the client/server protocol. The --with-zlib-dir=no|bundled|DIR option provides control over compression library support. The value no explicitly disables compression support. bundled causes the zlib library bundled in the MySQL sources to be used. A DIR path name specifies the directory in which to find the compression library sources. * It is possible to build MySQL with large table support using the --with-big-tables option. This option causes the variables that store table row counts to be declared as unsigned long long rather than unsigned long. This enables tables to hold up to approximately 1.844E+19 ((2^32)^2) rows rather than 2^32 (~4.295E+09) rows. Previously it was necessary to pass -DBIG_TABLES to the compiler manually in order to enable this feature. * Run configure with the --disable-grant-options option to cause the --bootstrap, --skip-grant-tables, and --init-file options for mysqld to be disabled. For Windows, the configure.js script recognizes the DISABLE_GRANT_OPTIONS flag, which has the same effect. The capability is available as of MySQL 5.1.15. * This option allows MySQL Community Server features to be enabled. Additional options may be required for individual features, such as --enable-profiling to enable statement profiling. This option was added in MySQL 5.1.24. It is enabled by default as of MySQL 5.1.28; to disable it, use --disable-community-features. * When given with --enable-community-features, the --enable-profiling option enables the statement profiling capability exposed by the SHOW PROFILE and SHOW PROFILES statements. (See Section 12.4.5.33, "SHOW PROFILES Syntax.") This option was added in MySQL 5.1.24. It is enabled by default as of MySQL 5.1.28; to disable it, use --disable-profiling. * See Section 2.1, "General Installation Guidance," for options that pertain to particular operating systems. * See Section 5.5.6.2, "Using SSL Connections," for options that pertain to configuring MySQL to support secure (encrypted) connections. * Several configure options apply to plugin selection and building: --with-plugins=PLUGIN[,PLUGIN]... --with-plugins=GROUP --with-plugin-PLUGIN --without-plugin-PLUGIN PLUGIN is an individual plugin name such as csv or archive. As shorthand, GROUP is a configuration group name such as none (select no plugins) or all (select all plugins). You can build a plugin as static (compiled into the server) or dynamic (built as a dynamic library that must be installed using the INSTALL PLUGIN statement before it can be used). Some plugins might not support static or dynamic build. configure --help shows the following information pertaining to plugins: + The plugin-related options + The names of all available plugins + For each plugin, a description of its purpose, which build types it supports (static or dynamic), and which plugin groups it is a part of. --with-plugins can take a list of one or more plugin names separated by commas, or a plugin group name. The named plugins are configured to be built as static plugins. --with-plugin-PLUGIN configures the given plugin to be built as a static plugin. --without-plugin-PLUGIN disables the given plugin from being built. If a plugin is named both with a --with and --without option, the result is undefined. For any plugin that is not explicitly selected or disabled, it is selected to be built dynamically if it supports dynamic build, and not built if it does not support dynamic build. (Thus, in the case that no plugin options are given, all plugins that support dynamic build are selected to be built as dynamic plugins. Plugins that do not support dynamic build are not built.) 2.3.3. Installing from the Development Source Tree Caution You should read this section only if you are interested in helping us test our new code. If you just want to get MySQL up and running on your system, you should use a standard release distribution (either a binary or source distribution). To obtain the most recent development source tree, you must have Bazaar installed. You can obtain Bazaar from the Bazaar VCS Web site (http://bazaar-vcs.org). Bazaar is supported by any platform that supports Python, and is therefore compatible with any Linux, Unix, Windows or Mac OS X host. Instructions for downloading and installing Bazaar on the different platforms are available on the Bazaar Web site. All MySQL projects are hosted on Launchpad (http://launchpad.net/). MySQL projects, including MySQL server, MySQL Workbench, and others are available from the Sun/MySQL Engineering (http://launchpad.net/~mysql) page. For the repositories related only to MySQL server, see the MySQL Server (http://launchpad.net/mysql-server) page. To build under Unix/Linux, you must have the following tools installed: * GNU make, available from http://www.gnu.org/software/make/. Although some platforms come with their own make implementations, it is highly recommended that you use GNU make. It may already be available on your system as gmake. * autoconf 2.58 (or newer), available from http://www.gnu.org/software/autoconf/. * automake 1.8.1, available from http://www.gnu.org/software/automake/. * libtool 1.5, available from http://www.gnu.org/software/libtool/. * m4, available from http://www.gnu.org/software/m4/. * bison, available from http://www.gnu.org/software/bison/. You should use the latest version of bison where possible. Version 1.75 and version 2.1 are known to work. There have been reported problems with bison 1.875. If you experience problems, upgrade to a later, rather than earlier, version. Versions of bison older than 1.75 may report this error: sql_yacc.yy:#####: fatal error: maximum table size (32767) exceeded The maximum table size is not actually exceeded; the error is caused by bugs in older versions of bison. To build under Windows you must have Microsoft Visual C++ 2005 Express Edition, Visual Studio .Net 2003 (7.1), or Visual Studio 2005 (8.0) compiler system. Once the necessary tools are installed, you must create a local branch of the MySQL source code on your machine: 1. To obtain a copy of the MySQL source code, you must create a new Bazaar branch. If you do not already have a Bazaar repository directory set up, you need to initialize a new directory: shell> mkdir mysql-server shell> bzr init-repo --trees mysql-server 2. Once you have an initialized directory, you can branch from the public MySQL server repositories to create a local source tree. To create a branch of a specific version: shell> cd mysql-server shell> bzr branch lp:mysql-server/5.1 mysql-5.1 3. The initial download will take some time to complete, depending on the speed of your connection. Please be patient. Once you have downloaded the first tree, additional trees should take significantly less time to download. 4. When building from the Bazaar branch, you may want to create a copy of your active branch so that you can make configuration and other changes without affecting the original branch contents. You can achieve this by branching from the original branch: shell> bzr branch mysql-5.1 mysql-5.1-build 5. To obtain changes made after you have set up the branch initially, update it using the pull option periodically. Use this command in the top-level directory of the local copy: shell> bzr pull You can examine the changeset comments for the tree by using the log option to bzr: shell> bzr log You can also browse changesets, comments, and source code online. To browse this information for MySQL 5.1, go to the Launchpad MySQL Server (http://launchpad.net/mysql-server) page. If you see diffs (changes) or code that you have a question about, do not hesitate to send email to the MySQL internals mailing list. See Section 1.6.1, "MySQL Mailing Lists." Also, if you think you have a better idea on how to do something, send an email message to the list with a patch. After you have the local branch, you can build MySQL server from the source code. On Windows, the build process is different from Unix/Linux: see Section 2.5.10, "Installing MySQL from Source on Windows." On Unix/Linux, use the autoconf system to create the configure script so that you can configure the build environment before building. The following example shows the typical commands required to build MySQL from a source tree. 1. Change location to the top-level directory of the source tree; replace mysql-5.1 with the appropriate directory name. shell> cd mysql-5.1 2. Prepare the source tree for configuration. Prior to MySQL 5.1.12, you must separately configure the InnoDB storage engine. Run the following command from the main source directory: shell> (cd storage/innobase; autoreconf --force --install) You can omit the previous command for MySQL 5.1.12 and later, or if you do not require InnoDB support. Prepare the remainder of the source tree: shell> autoreconf --force --install As an alternative to the preceding autoreconf command, you can use BUILD/autorun.sh, which acts as a shortcut for the following sequence of commands: shell> aclocal; autoheader shell> libtoolize --automake --force shell> automake --force --add-missing; autoconf If you get some strange errors during this stage, verify that you have the correct version of libtool installed. 3. Configure the source tree and compile MySQL: shell> ./configure # Add your favorite options here shell> make For a description of some configure options, see Section 2.3.2, "Typical configure Options." A collection of our standard configuration scripts is located in the BUILD/ subdirectory. For example, you may find it more convenient to use the BUILD/compile-pentium-debug script than the preceding set of shell commands. To compile on a different architecture, modify the script by removing flags that are Pentium-specific, or use another script that may be more appropriate. These scripts are provided on an "as-is" basis. They are not officially maintained and their contents may change from release to release. 4. When the build is done, run make install. Be careful with this on a production machine; the command may overwrite your live release installation. If you already have MySQL installed and do not want to overwrite it, run ./configure with values for the --prefix, --with-tcp-port, and --with-unix-socket-path options different from those used for your production server. 5. Play hard with your new installation and try to make the new features crash. Start by running make test. See Section 22.1.2, "MySQL Test Suite." 6. If you have gotten to the make stage, but the distribution does not compile, please enter the problem into our bugs database using the instructions given in Section 1.7, "How to Report Bugs or Problems." If you have installed the latest versions of the required GNU tools, and they crash trying to process our configuration files, please report that also. However, if you get a command not found error or a similar problem for aclocal, configure, or other required tools, do not report it. Instead, make sure that all the required tools are installed and that your PATH variable is set correctly so that your shell can find them. 2.3.4. Dealing with Problems Compiling MySQL All MySQL programs compile cleanly for us with no warnings on Solaris or Linux using gcc. On other systems, warnings may occur due to differences in system include files. See Section 2.3.5, "MIT-pthreads Notes," for warnings that may occur when using MIT-pthreads. For other problems, check the following list. The solution to many problems involves reconfiguring. If you do need to reconfigure, take note of the following: * If configure is run after it has previously been run, it may use information that was gathered during its previous invocation. This information is stored in config.cache. When configure starts up, it looks for that file and reads its contents if it exists, on the assumption that the information is still correct. That assumption is invalid when you reconfigure. * Each time you run configure, you must run make again to recompile. However, you may want to remove old object files from previous builds first because they were compiled using different configuration options. To prevent old configuration information or object files from being used, run these commands before re-running configure: shell> rm config.cache shell> make clean Alternatively, you can run make distclean. The following list describes some of the problems when compiling MySQL that have been found to occur most often: * If you get errors such as the ones shown here when compiling sql_yacc.cc, you probably have run out of memory or swap space: Internal compiler error: program cc1plus got fatal signal 11 Out of virtual memory Virtual memory exhausted The problem is that gcc requires a huge amount of memory to compile sql_yacc.cc with inline functions. Try running configure with the --with-low-memory option: shell> ./configure --with-low-memory This option causes -fno-inline to be added to the compile line if you are using gcc and -O0 if you are using something else. You should try the --with-low-memory option even if you have so much memory and swap space that you think you can't possibly have run out. This problem has been observed to occur even on systems with generous hardware configurations, and the --with-low-memory option usually fixes it. * By default, configure picks c++ as the compiler name and GNU c++ links with -lg++. If you are using gcc, that behavior can cause problems during configuration such as this: configure: error: installation or configuration problem: C++ compiler cannot create executables. You might also observe problems during compilation related to g++, libg++, or libstdc++. One cause of these problems is that you may not have g++, or you may have g++ but not libg++, or libstdc++. Take a look at the config.log file. It should contain the exact reason why your C++ compiler didn't work. To work around these problems, you can use gcc as your C++ compiler. Try setting the environment variable CXX to "gcc -O3". For example: shell> CXX="gcc -O3" ./configure This works because gcc compiles C++ source files as well as g++ does, but does not link in libg++ or libstdc++ by default. Another way to fix these problems is to install g++, libg++, and libstdc++. However, do not use libg++ or libstdc++ with MySQL because this only increases the binary size of mysqld without providing any benefits. Some versions of these libraries have also caused strange problems for MySQL users in the past. * If your compile fails with errors such as any of the following, you must upgrade your version of make to GNU make: making all in mit-pthreads make: Fatal error in reader: Makefile, line 18: Badly formed macro assignment Or: make: file `Makefile' line 18: Must be a separator (: Or: pthread.h: No such file or directory Solaris and FreeBSD are known to have troublesome make programs. GNU make 3.75 is known to work. * If you want to define flags to be used by your C or C++ compilers, do so by adding the flags to the CFLAGS and CXXFLAGS environment variables. You can also specify the compiler names this way using CC and CXX. For example: shell> CC=gcc shell> CFLAGS=-O3 shell> CXX=gcc shell> CXXFLAGS=-O3 shell> export CC CFLAGS CXX CXXFLAGS See Section 2.2, "Installing MySQL from Generic Binaries on Unix/Linux," for a list of flag definitions that have been found to be useful on various systems. * If you get errors such as those shown here when compiling mysqld, configure did not correctly detect the type of the last argument to accept(), getsockname(), or getpeername(): cxx: Error: mysqld.cc, line 645: In this statement, the referenced type of the pointer value ''length'' is ''unsigned long'', which is not compatible with ''int''. new_sock = accept(sock, (struct sockaddr *)&cAddr, &length); To fix this, edit the config.h file (which is generated by configure). Look for these lines: /* Define as the base type of the last arg to accept */ #define SOCKET_SIZE_TYPE XXX Change XXX to size_t or int, depending on your operating system. (You must do this each time you run configure because configure regenerates config.h.) * The sql_yacc.cc file is generated from sql_yacc.yy. Normally, the build process does not need to create sql_yacc.cc because MySQL comes with a pre-generated copy. However, if you do need to re-create it, you might encounter this error: "sql_yacc.yy", line xxx fatal: default action causes potential... This is a sign that your version of yacc is deficient. You probably need to install bison (the GNU version of yacc) and use that instead. * On Debian Linux 3.0, you need to install gawk instead of the default mawk. * If you need to debug mysqld or a MySQL client, run configure with the --with-debug option, and then recompile and link your clients with the new client library. See MySQL Internals: Porting (http://forge.mysql.com/wiki/MySQL_Internals_Porting). * If you get a compilation error on Linux (for example, SuSE Linux 8.1 or Red Hat Linux 7.3) similar to the following one, you probably do not have g++ installed: libmysql.c:1329: warning: passing arg 5 of `gethostbyname_r' from incompatible pointer type libmysql.c:1329: too few arguments to function `gethostbyname_r' libmysql.c:1329: warning: assignment makes pointer from integer without a cast make[2]: *** [libmysql.lo] Error 1 By default, the configure script attempts to determine the correct number of arguments by using g++ (the GNU C++ compiler). This test yields incorrect results if g++ is not installed. There are two ways to work around this problem: + Make sure that the GNU C++ g++ is installed. On some Linux distributions, the required package is called gpp; on others, it is named gcc-c++. + Use gcc as your C++ compiler by setting the CXX environment variable to gcc: export CXX="gcc" You must run configure again after making either of those changes. 2.3.5. MIT-pthreads Notes This section describes some of the issues involved in using MIT-pthreads. On Linux, you should not use MIT-pthreads. Use the installed LinuxThreads implementation instead. See Section 2.6, "Installing MySQL on Linux." If your system does not provide native thread support, you should build MySQL using the MIT-pthreads package. This includes older FreeBSD systems, SunOS 4.x, Solaris 2.4 and earlier, and some others. See Section 2.1, "General Installation Guidance." MIT-pthreads is not part of the MySQL 5.1 source distribution. If you require this package, you need to download it separately from http://dev.mysql.com/Downloads/Contrib/pthreads-1_60_beta6-mysql.t ar.gz After downloading, extract this source archive into the top level of the MySQL source directory. It creates a new subdirectory named mit-pthreads. * On most systems, you can force MIT-pthreads to be used by running configure with the --with-mit-threads option: shell> ./configure --with-mit-threads Building in a nonsource directory is not supported when using MIT-pthreads because we want to minimize our changes to this code. * The checks that determine whether to use MIT-pthreads occur only during the part of the configuration process that deals with the server code. If you have configured the distribution using --without-server to build only the client code, clients do not know whether MIT-pthreads is being used and use Unix socket file connections by default. Because Unix socket files do not work under MIT-pthreads on some platforms, this means you need to use -h or --host with a value other than localhost when you run client programs. * When MySQL is compiled using MIT-pthreads, system locking is disabled by default for performance reasons. You can tell the server to use system locking with the --external-locking option. This is needed only if you want to be able to run two MySQL servers against the same data files, but that is not recommended, anyway. * Sometimes the pthread bind() command fails to bind to a socket without any error message (at least on Solaris). The result is that all connections to the server fail. For example: shell> mysqladmin version mysqladmin: connect to server at '' failed; error: 'Can't connect to mysql server on localhost (146)' The solution to this problem is to kill the mysqld server and restart it. This has happened to us only when we have forcibly stopped the server and restarted it immediately. * With MIT-pthreads, the sleep() system call isn't interruptible with SIGINT (break). This is noticeable only when you run mysqladmin --sleep. You must wait for the sleep() call to terminate before the interrupt is served and the process stops. * When linking, you might receive warning messages like these (at least on Solaris); they can be ignored: ld: warning: symbol `_iob' has differing sizes: (file /my/local/pthreads/lib/libpthread.a(findfp.o) value=0x4; file /usr/lib/libc.so value=0x140); /my/local/pthreads/lib/libpthread.a(findfp.o) definition taken ld: warning: symbol `__iob' has differing sizes: (file /my/local/pthreads/lib/libpthread.a(findfp.o) value=0x4; file /usr/lib/libc.so value=0x140); /my/local/pthreads/lib/libpthread.a(findfp.o) definition taken * Some other warnings also can be ignored: implicit declaration of function `int strtoll(...)' implicit declaration of function `int strtoul(...)' * We have not been able to make readline work with MIT-pthreads. (This is not necessary, but may be of interest to some.) 2.4. Upgrading or Downgrading MySQL 2.4.1. Upgrading MySQL As a general rule, to upgrade from one release series to another, you should go to the next series rather than skipping a series. To upgrade from a release series previous to MySQL 5.0, upgrade to each successive release series in turn until you have reached MySQL 5.0, and then proceed with the upgrade to MySQL 5.1. For example, if you currently are running MySQL 4.0 and wish to upgrade to a newer series, upgrade to MySQL 4.1 first before upgrading to 5.0, and so forth. For information on upgrading to MySQL 5.0, see the MySQL 5.0 Reference Manual; for earlier releases, see the MySQL 3.23, 4.0, 4.1 Reference Manual. If you perform a binary (in-place) upgrade without dumping and reloading tables, you cannot upgrade directly from MySQL 4.1 to 5.1. This occurs due to an incompatible change in the MyISAM table index format in MySQL 5.0. Upgrade from MySQL 4.1 to 5.0 and repair all MyISAM tables (see Section 2.4.4, "Rebuilding or Repairing Tables or Indexes"). Then upgrade from MySQL 5.0 to 5.1 and check and repair your tables. To upgrade from MySQL 5.0 to 5.1, use the items in the following checklist as a guide: * Before any upgrade, back up your databases, including the mysql database that contains the grant tables. See Section 6.2, "Database Backup Methods." * Read all the notes in Section 2.4.1.1, "Upgrading from MySQL 5.0 to 5.1." These notes enable you to identify upgrade issues that apply to your current MySQL installation. Some incompatibilities discussed in that section require your attention before upgrading. Others should be dealt with after upgrading. * Read Appendix C, "MySQL Change History" as well, which provides information about features that are new in MySQL 5.1 or differ from those found in MySQL 5.0. * After you upgrade to a new version of MySQL, run mysql_upgrade (see Section 4.4.8, "mysql_upgrade --- Check Tables for MySQL Upgrade"). This program checks your tables, and attempts to repair them if necessary. It also updates your grant tables to make sure that they have the current structure so that you can take advantage of any new capabilities. (Some releases of MySQL introduce changes to the structure of the grant tables to add new privileges or features.) * If you are running MySQL Server on Windows, see Section 2.5.7, "Upgrading MySQL on Windows." * If you are using replication, see Section 16.4.3, "Upgrading a Replication Setup," for information on upgrading your replication setup. * If you are upgrading an installation originally produced by installing multiple RPM packages, it is best to upgrade all the packages, not just some. For example, if you previously installed the server and client RPMs, do not upgrade just the server RPM. * As of MySQL 5.1.9, the mysqld-max server is included in binary distributions. There is no separate MySQL-Max distribution. As of MySQL 5.1.12, there is no mysqld-max server at all in binary distributions. They contain a server that includes the features previously included in mysqld-max. * If you have created a user-defined function (UDF) with a given name and upgrade MySQL to a version that implements a new built-in function with the same name, the UDF becomes inaccessible. To correct this, use DROP FUNCTION to drop the UDF, and then use CREATE FUNCTION to re-create the UDF with a different nonconflicting name. The same is true if the new version of MySQL implements a built-in function with the same name as an existing stored function. See Section 8.2.4, "Function Name Parsing and Resolution," for the rules describing how the server interprets references to different kinds of functions. You can always move the MySQL format files and data files between different versions on systems with the same architecture as long as you stay within versions for the same release series of MySQL. If you are cautious about using new versions, you can always rename your old mysqld before installing a newer one. For example, if you are using MySQL 5.0.13 and want to upgrade to 5.1.10, rename your current server from mysqld to mysqld-5.0.13. If your new mysqld then does something unexpected, you can simply shut it down and restart with your old mysqld. If, after an upgrade, you experience problems with recompiled client programs, such as Commands out of sync or unexpected core dumps, you probably have used old header or library files when compiling your programs. In this case, you should check the date for your mysql.h file and libmysqlclient.a library to verify that they are from the new MySQL distribution. If not, recompile your programs with the new headers and libraries. If problems occur, such as that the new mysqld server does not start or that you cannot connect without a password, verify that you do not have an old my.cnf file from your previous installation. You can check this with the --print-defaults option (for example, mysqld --print-defaults). If this command displays anything other than the program name, you have an active my.cnf file that affects server or client operation. If your MySQL installation contains a large amount of data that might take a long time to convert after an in-place upgrade, you might find it useful to create a "dummy" database instance for assessing what conversions might be needed and the work involved to perform them. Make a copy of your MySQL instance that contains a full copy of the mysql database, plus all other databases without data. Run your upgrade procedure on this dummy instance to see what actions might be needed so that you can better evaluate the work involved when performing actual data conversion on your original database instance. It is a good idea to rebuild and reinstall the Perl DBD::mysql module whenever you install a new release of MySQL. The same applies to other MySQL interfaces as well, such as PHP mysql extensions and the Python MySQLdb module. 2.4.1.1. Upgrading from MySQL 5.0 to 5.1 After upgrading a 5.0 installation to 5.0.10 or above, it is necessary to upgrade your grant tables. Otherwise, creating stored procedures and functions might not work. To perform this upgrade, run mysql_upgrade. Note It is good practice to back up your data before installing any new version of software. Although MySQL works very hard to ensure a high level of quality, you should protect your data by making a backup. To upgrade to 5.1 from any previous version, MySQL recommends that you dump your tables with mysqldump before upgrading and reload the dump file after upgrading. If you perform a binary (in-place) upgrade without dumping and reloading tables, you cannot upgrade directly from MySQL 4.1 to 5.1. This occurs due to an incompatible change in the MyISAM table index format in MySQL 5.0. Upgrade from MySQL 4.1 to 5.0 and repair all MyISAM tables (see Section 2.4.4, "Rebuilding or Repairing Tables or Indexes"). Then upgrade from MySQL 5.0 to 5.1 and check and repair your tables. In general, you should do the following when upgrading from MySQL 5.0 to 5.1: * Read all the items in the following sections to see whether any of them might affect your applications: + Section 2.4.1, "Upgrading MySQL," has general update information. + The items in the change lists found later in this section enable you to identify upgrade issues that apply to your current MySQL installation. + The MySQL 5.1 change history describes significant new features you can use in 5.1 or that differ from those found in MySQL 5.0. Some of these changes may result in incompatibilities. See Section C.1, "Changes in Release 5.1.x (Production)." * Note particularly any changes that are marked Known issue or Incompatible change. These incompatibilities with earlier versions of MySQL may require your attention before you upgrade. Our aim is to avoid these changes, but occasionally they are necessary to correct problems that would be worse than an incompatibility between releases. If any upgrade issue applicable to your installation involves an incompatibility that requires special handling, follow the instructions given in the incompatibility description. Often this will involve a dump and reload, or use of a statement such as CHECK TABLE or REPAIR TABLE. For dump and reload instructions, see Section 2.4.4, "Rebuilding or Repairing Tables or Indexes." Any procedure that involves REPAIR TABLE with the USE_FRM option must be done before upgrading. Use of this statement with a version of MySQL different from the one used to create the table (that is, using it after upgrading) may damage the table. See Section 12.4.2.6, "REPAIR TABLE Syntax." * After you upgrade to a new version of MySQL, run mysql_upgrade (see Section 4.4.8, "mysql_upgrade --- Check Tables for MySQL Upgrade"). This program checks your tables, and attempts to repair them if necessary. It also updates your grant tables to make sure that they have the current structure so that you can take advantage of any new capabilities. (Some releases of MySQL introduce changes to the structure of the grant tables to add new privileges or features.) * Check Section 2.4.3, "Checking Whether Tables or Indexes Must Be Rebuilt," to see whether changes to table formats or to character sets or collations were made between your current version of MySQL and the version to which you are upgrading. If so and these changes result in an incompatibility between MySQL versions, you will need to upgrade the affected tables using the instructions in Section 2.4.4, "Rebuilding or Repairing Tables or Indexes." * If you are running MySQL Server on Windows, see Section 2.5.7, "Upgrading MySQL on Windows." * If you are using replication, see Section 16.4.3, "Upgrading a Replication Setup," for information on upgrading your replication setup. If your MySQL installation contains a large amount of data that might take a long time to convert after an in-place upgrade, you might find it useful to create a "dummy" database instance for assessing what conversions might be needed and the work involved to perform them. Make a copy of your MySQL instance that contains a full copy of the mysql database, plus all other databases without data. Run your upgrade procedure on this dummy instance to see what actions might be needed so that you can better evaluate the work involved when performing actual data conversion on your original database instance. MySQL Enterprise MySQL Enterprise subscribers will find more information about upgrading in the Knowledge Base articles found at Upgrading (https://kb.mysql.com/search.php?cat=search&category=41). Access to the MySQL Knowledge Base collection of articles is one of the advantages of subscribing to MySQL Enterprise. For more information, see http://www.mysql.com/products/enterprise/advisors.html. The following lists describe changes that may affect applications and that you should watch out for when upgrading to MySQL 5.1. Configuration Changes: * Before MySQL 5.1.11, to build MySQL from source with SSL support enabled, you would invoke configure with either the --with-openssl or --with-yassl option. In MySQL 5.1.11, those options both have been replaced by the --with-ssl option. By default, --with-ssl causes the bundled yaSSL library to be used. To select OpenSSL instead, give the option as --with-ssl=path, where path is the directory where the OpenSSL header files and libraries are located. Server Changes: * Known issue: After a binary upgrade to MySQL 5.1 from a MySQL 5.0 installation that contains ARCHIVE tables, accessing those tables will cause the server to crash, even if you have run mysql_upgrade or CHECK TABLE ... FOR UPGRADE. To work around this problem, use mysqldump to dump all ARCHIVE tables before upgrading, and reload them into MySQL 5.1 after upgrading. * Known issue: The fix for Bug#23491: http://bugs.mysql.com/bug.php?id=23491 introduced a problem with SHOW CREATE VIEW, which is used by mysqldump. This causes an incompatibility when upgrading from versions affected by that bug fix (MySQL 5.0.40 through 5.0.43, MySQL 5.1.18 through 5.1.19): If you use mysqldump before upgrading from an affected version and reload the data after upgrading to a higher version, you must drop and recreate your views. * Known issue: Dumps performed by using mysqldump to generate a dump file before the upgrade and reloading the file after upgrading are subject to the following problem: Before MySQL 5.0.40, mysqldump displays SPATIAL index definitions using prefix lengths for the indexed columns. These prefix lengths are accepted in MySQL 5.0, but not as of MySQL 5.1. If you use mysqldump from versions of MySQL older than 5.0.40, any table containing SPATIAL indexes will cause an error when the dump file is reloaded into MySQL 5.1 or higher. For example, a table definition might look like this when dumped in MySQL 5.0: CREATE TABLE `t` ( `g` geometry NOT NULL, SPATIAL KEY `g` (`g`(32)) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 The SPATIAL index definition will not be accepted in MySQL 5.1. To work around this, edit the dump file to remove the prefix: CREATE TABLE `t` ( `g` geometry NOT NULL, SPATIAL KEY `g` (`g`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 Dump files can be large, so it may be preferable to dump table definitions and data separately to make it easier to edit the definitions: shell> mysqldump --no-data other_args > definitions.sql shell> mysqldump --no-create-info other_args > data.sql Then edit definitions.sql before reloading definitions.sql and data.sql, in that order. If you upgrade to a version of MySQL 5.0 higher than 5.0.40 before upgrading to MySQL 5.1, this problem does not occur. * Known issue: Before MySQL 5.1.30, the CHECK TABLE ... FOR UPGRADE statement did not check for incompatible collation changes made in MySQL 5.1.24. (This also affects mysqlcheck and mysql_upgrade, which cause that statement to be executed.) Prior to the fix made in 5.1.30, a binary upgrade (performed without dumping tables with mysqldump before the upgrade and reloading the dump file after the upgrade) would corrupt tables. After the fix, CHECK TABLE ... FOR UPGRADE properly detects the problem and warns about tables that need repair. However, the fix is not backward compatible and can result in a downgrading problem under these circumstances: 1. Perform a binary upgrade to a version of MySQL that includes the fix. 2. Run CHECK TABLE ... FOR UPGRADE (or mysqlcheck or mysql_upgrade) to upgrade tables. 3. Perform a binary downgrade to a version of MySQL that does not include the fix. The solution is to dump tables with mysqldump before the downgrade and reload the dump file after the downgrade. Alternatively, drop and recreate affected indexes. * Known issue: MySQL introduces encoding for table names that have non-ASCII characters (see Section 8.2.3, "Mapping of Identifiers to File Names"). After a binary upgrade from MySQL 5.0 to 5.1 or higher, the server recognizes names that have non-ASCII characters and adds a #mysql50# prefix to them. As of MySQL 5.1.31, mysql_upgrade encodes these names by executing the following command: mysqlcheck --all-databases --check-upgrade --fix-db-names --fix-table -names Prior to MySQL 5.1.31, mysql_upgrade does not execute this command, so you should execute it manually if you have database or table names that contain nonalphanumeric characters. Prior to MySQL 5.1.23, the mysqlcheck command does not perform the name encoding for views. To work around this problem, drop each affected view and recreate it. mysqlcheck cannot fix names that contain literal instances of the @ character that is used for encoding special characters. If you have databases or tables that contain this character, use mysqldump to dump them before upgrading to MySQL 5.1, and then reload the dump file after upgrading. * Known issue: When upgrading from MySQL 5.0 to versions of 5.1 prior to 5.1.23, running mysqlcheck (or mysql_upgrade, which runs mysqlcheck) to upgrade tables fails for names that must be written as quoted identifiers. To work around this problem, rename each affected table to a name that does not require quoting: RENAME TABLE `tab``le_a` TO table_a; RENAME TABLE `table b` TO table_b; After renaming the tables, run the mysql_upgrade program. Then rename the tables back to their original names: RENAME TABLE table_a TO `tab``le_a`; RENAME TABLE table_b TO `table b`; * Known issue: In connection with view creation, the server created arc directories inside database directories and maintained useless copies of .frm files there. Creation and renaming procedures of those copies as well as creation of arc directories has been discontinued in MySQL 5.1.29. This change does cause a problem when downgrading to older server versions which manifests itself under these circumstances: 1. Create a view v_orig in MySQL 5.1.29 or higher. 2. Rename the view to v_new and then back to v_orig. 3. Downgrade to an older 5.1.x server and run mysql_upgrade. 4. Try to rename v_orig to v_new again. This operation fails. As a workaround to avoid this problem, use either of these approaches: + Dump your data using mysqldump before downgrading and reload the dump file after downgrading. + Instead of renaming a view after the downgrade, drop it and recreate it. * Incompatible change: Character set or collation changes were made in MySQL 5.1.21, 5.1.23, and 5.1.24 that may require table indexes to be rebuilt. For details, see Section 2.4.3, "Checking Whether Tables or Indexes Must Be Rebuilt." * Incompatible change: MySQL 5.1 implements support for a plugin API that allows the loading and unloading of components at runtime, without restarting the server. Section 22.2, "The MySQL Plugin API." The plugin API requires the mysql.plugin table. After upgrading from an older version of MySQL, you should run the mysql_upgrade command to create this table. See Section 4.4.8, "mysql_upgrade --- Check Tables for MySQL Upgrade." Plugins are installed in the directory named by the plugin_dir system variable. This variable also controls the location from which the server loads user-defined functions (UDFs), which is a change from earlier versions of MySQL. That is, all UDF library files now must be installed in the plugin directory. When upgrading from an older version of MySQL, you must migrate your UDF files to the plugin directory. * Incompatible change: The table_cache system variable has been renamed to table_open_cache. Any scripts that refer to table_cache must be updated to use the new name. * Incompatible change: In MySQL 5.1.36, options for loading plugins such as pluggable storage engines were changed from boolean to tristate format. The implementations overlap, but if you previously used options of the form --plugin_name=0 or --plugin_name=1, you should instead use --plugin_name=OFF or --plugin_name=ON, respectively. For details, see Section 5.1.3, "Server Options for Loading Plugins." * Incompatible change: From MySQL 5.1.24 to 5.1.31, the UPDATE statement was changed such that assigning NULL to a NOT NULL column caused an error even when strict SQL mode was not enabled. The original behavior before MySQL 5.1.24 was that such assignments caused an error only in strict SQL mode, and otherwise set the column to the implicit default value for the column data type and generated a warning. (For information about implicit default values, see Section 10.1.4, "Data Type Default Values.") The change caused compatibility problems for applications that relied on the original behavior. It also caused replication problems between servers that had the original behavior and those that did not, for applications that assigned NULL to NOT NULL columns in UPDATE statements without strict SQL mode enabled. The change was reverted in MySQL 5.1.32 so that UPDATE again had the original behavior. Problems can still occur if you replicate between servers that have the modified UPDATE behavior and those that do not. * Incompatible change: As of MySQL 5.1.29, the default binary logging mode has been changed from MIXED to STATEMENT for compatibility with MySQL 5.0. * Incompatible change: In MySQL 5.1.25, a change was made to the way that the server handles prepared statements. This affects prepared statements processed at the SQL level (using the PREPARE statement) and those processed using the binary client-server protocol (using the mysql_stmt_prepare() C API function). Previously, changes to metadata of tables or views referred to in a prepared statement could cause a server crash when the statement was next executed, or perhaps an error at execute time with a crash occurring later. For example, this could happen after dropping a table and recreating it with a different definition. Now metadata changes to tables or views referred to by prepared statements are detected and cause automatic repreparation of the statement when it is next executed. Metadata changes occur for DDL statements such as those that create, drop, alter, rename, or truncate tables, or that analyze, optimize, or repair tables. Repreparation also occurs after referenced tables or views are flushed from the table definition cache, either implicitly to make room for new entries in the cache, or explicitly due to FLUSH TABLES. Repreparation is automatic, but to the extent that it occurs, performance of prepared statements is diminished. Table content changes (for example, with INSERT or UPDATE) do not cause repreparation, nor do SELECT statements. An incompatibility with previous versions of MySQL is that a prepared statement may now return a different set of columns or different column types from one execution to the next. For example, if the prepared statement is SELECT * FROM t1, altering t1 to contain a different number of columns causes the next execution to return a number of columns different from the previous execution. Older versions of the client library cannot handle this change in behavior. For applications that use prepared statements with the new server, an upgrade to the new client library is strongly recommended. Along with this change to statement repreparation, the default value of the table_definition_cache system variable has been increased from 128 to 256. The purpose of this increase is to lessen the chance that prepared statements will need repreparation due to referred-to tables/views having been flushed from the cache to make room for new entries. A new status variable, Com_stmt_reprepare, has been introduced to track the number of repreparations. * Incompatible change: As of MySQL 5.1.23, within a stored routine, it is no longer allowable to declare a cursor for a SHOW or DESCRIBE statement. This happened to work in some instances, but is no longer supported. In many cases, a workaround for this change is to use the cursor with a SELECT query to read from an INFORMATION_SCHEMA table that produces the same information as the SHOW statement. * Incompatible change: SHOW CREATE VIEW displays view definitions using an AS alias_name clause for each column. If a column is created from an expression, the default alias is the expression text, which can be quite long. As of MySQL 5.1.23, aliases for column names in CREATE VIEW statements are checked against the maximum column length of 64 characters (not the maximum alias length of 256 characters). As a result, views created from the output of SHOW CREATE VIEW fail if any column alias exceeds 64 characters. This can cause problems for replication or loading dump files. For additional information and workarounds, see Section D.4, "Restrictions on Views." * Incompatible change: Several issues were identified for stored programs (stored procedures and functions, triggers, and events) and views containing non-ASCII symbols. These issues involved conversion errors due to incomplete character set information when translating these objects to and from stored format. To address these problems, the representation for these objects was changed in MySQL 5.1.21. However, the fixes affect all stored programs and views. (For example, you will see warnings about "no creation context.") To avoid warnings from the server about the use of old definitions from any release prior to 5.1.21, you should dump stored programs and views with mysqldump after upgrading to 5.1.21 or higher, and then reload them to recreate them with new definitions. Invoke mysqldump with a --default-character-set option that names the non-ASCII character set that was used for the definitions when the objects were originally defined. * Incompatible change: As of MySQL 5.1.20, mysqld_safe supports error logging to syslog on systems that support the logger command. The new --syslog and --skip-syslog options can be used instead of the --log-error option to control logging behavior, as described in Section 4.3.2, "mysqld_safe --- MySQL Server Startup Script." In 5.1.21 and up, the default is --skip-syslog, which is compatible with the default behavior of writing an error log file for releases prior to 5.1.20. In 5.1.20 only, the following conditions apply: 1) The default is to use syslog, which is not compatible with releases prior to 5.1.20. 2) Logging to syslog may fail to operate correctly in some cases. For these reasons, avoid using MySQL 5.1.20. * Incompatible change: As of MySQL 5.1.18, the plugin interface and its handling of system variables was changed. Command-line options such as --skip-innodb now cause an error if InnoDB is not built-in or plugin-loaded. You should use --loose-skip-innodb if you do not want any error even if InnoDB is not available. The --loose prefix modifier should be used for all command-line options where you are uncertain whether the plugin exists and when you want the operation to proceed even if the option is necessarily ignored due to the absence of the plugin. (For a desecription of how --loose works, see Section 4.2.3.1, "Using Options on the Command Line.") * Incompatible change: As of MySQL 5.1.15, InnoDB rolls back only the last statement on a transaction timeout. A new option, --innodb_rollback_on_timeout, causes InnoDB to abort and roll back the entire transaction if a transaction timeout occurs (the same behavior as in MySQL 4.1). * Incompatible change: As of MySQL 5.1.15, the following conditions apply to enabling the read_only system variable: + If you attempt to enable read_only while you have any explicit locks (acquired with LOCK TABLES or have a pending transaction, an error will occur. + If other clients hold explicit table locks or have pending transactions, the attempt to enable read_only blocks until the locks are released and the transactions end. While the attempt to enable read_only is pending, requests by other clients for table locks or to begin transactions also block until read_only has been set. + read_only can be enabled while you hold a global read lock (acquired with FLUSH TABLES WITH READ LOCK) because that does not involve table locks. Previously, the attempt to enable read_only would return immediately even if explicit locks or transactions were pending, so some data changes could occur for statements executing in the server at the same time. * Incompatible change: The number of function names affected by IGNORE_SPACE was reduced significantly in MySQL 5.1.13, from about 200 to about 30. (For details about IGNORE_SPACE, see Section 8.2.4, "Function Name Parsing and Resolution.") This change improves the consistency of parser operation. However, it also introduces the possibility of incompatibility for old SQL code that relies on the following conditions: + IGNORE_SPACE is disabled. + The presence or absence of whitespace following a function name is used to distinguish between a built-in function and stored function that have the same name (for example, PI() versus PI ()). For functions that are no longer affected by IGNORE_SPACE as of MySQL 5.1.13, that strategy no longer works. Either of the following approaches can be used if you have code that is subject to the preceding incompatibility: + If a stored function has a name that conflicts with a built-in function, refer to the stored function with a schema name qualifier, regardless of whether whitespace is present. For example, write schema_name.PI() or schema_name.PI (). + Alternatively, rename the stored function to use a nonconflicting name and change invocations of the function to use the new name. * Incompatible change: For utf8 columns, the full-text parser incorrectly considered several nonword punctuation and whitespace characters as word characters, causing some searches to return incorrect results. The fix involves a change to the full-text parser in MySQL 5.1.12, so as of 5.1.12, any tables that have FULLTEXT indexes on utf8 columns must be repaired with REPAIR TABLE: REPAIR TABLE tbl_name QUICK; * Incompatible change: Storage engines can be pluggable at runtime, so the distinction between disabled and invalid storage engines no longer applies. As of MySQL 5.1.12, this affects the NO_ENGINE_SUBSTITUTION SQL mode, as described in Section 5.1.8, "Server SQL Modes." * Incompatible change: The structure of FULLTEXT indexes has been changed in MySQL 5.1.6. After upgrading to MySQL 5.1.6 or greater, any tables that have FULLTEXT indexes must be repaired with REPAIR TABLE: REPAIR TABLE tbl_name QUICK; * Incompatible change: In MySQL 5.1.6, when log tables were implemented, the default log destination for the general query and slow query log was TABLE. As of MySQL 5.1.21, this default has been changed to FILE, which is compatible with MySQL 5.0, but incompatible with earlier releases of MySQL 5.1. If you are upgrading from MySQL 5.0 to 5.1.21 or higher, no logging option changes should be necessary. However, if you are upgrading from 5.1.6 through 5.1.20 to 5.1.21 or higher and were using TABLE logging, use the --log-output=TABLE option explicitly to preserve your server's table-logging behavior. * Incompatible change: For ENUM columns that had enumeration values containing commas, the commas were mapped to 0xff internally. However, this rendered the commas indistinguishable from true 0xff characters in the values. This no longer occurs. However, the fix requires that you dump and reload any tables that have ENUM columns containing true 0xff in their values: Dump the tables using mysqldump with the current server before upgrading from a version of MySQL 5.1 older than 5.1.15 to version 5.1.15 or newer. * As of MySQL 5.1.12, the lc_time_names system variable specifies the locale that controls the language used to display day and month names and abbreviations. This variable affects the output from the DATE_FORMAT(), DAYNAME() and MONTHNAME() functions. See Section 9.7, "MySQL Server Locale Support." * As of MySQL 5.1.9, mysqld_safe no longer implicitly invokes mysqld-max if it exists. Instead, it invokes mysqld unless a --mysqld or --mysqld-version option is given to specify another server explicitly. If you previously relied on the implicit invocation of mysqld-max, you should use an appropriate option now. As of MySQL 5.1.12, there is no longer any separate mysqld-max server, so no change should be necessary. SQL Changes: * Known issue: Prior to MySQL 5.1.17, the parser accepted invalid code in SQL condition handlers, leading to server crashes or unexpected execution behavior in stored programs. Specifically, the parser allowed a condition handler to refer to labels for blocks that enclose the handler declaration. This was incorrect because block label scope does not include the code for handlers declared within the labeled block. As of 5.1.17, the parser rejects this invalid construct, but if you perform a binary upgrade (without dumping and reloading your databases), existing handlers that contain the construct still are invalid and should be rewritten even if they appear to function as you expect. To find affected handlers, use mysqldump to dump all stored procedures and functions, triggers, and events. Then attempt to reload them into an upgraded server. Handlers that contain illegal label references will be rejected. For more information about condition handlers and writing them to avoid invalid jumps, see Section 12.7.4.2, "DECLARE for Handlers." * Incompatible change: The parser accepted statements that contained /* ... */ that were not properly closed with */, such as SELECT 1 /* + 2. As of MySQL 5.1.23, statements that contain unclosed /*-comments now are rejected with a syntax error. This fix has the potential to cause incompatibilities. Because of Bug#26302: http://bugs.mysql.com/bug.php?id=26302, which caused the trailing */ to be truncated from comments in views, stored routines, triggers, and events, it is possible that objects of those types may have been stored with definitions that now will be rejected as syntactically invalid. Such objects should be dropped and re-created so that their definitions do not contain truncated comments. * Incompatible change: Multiple-table DELETE statements containing ambiguous aliases could have unintended side effects such as deleting rows from the wrong table. Example: DELETE FROM t1 AS a2 USING t1 AS a1 INNER JOIN t2 AS a2; As of MySQL 5.1.23, alias declarations can be declared only in the table_references part. Elsewhere in the statement, alias references are allowed but not alias declarations. Statements containing aliases that are no longer allowed must be rewritten. * Incompatible change: As of MySQL 5.1.8, TYPE = engine_name is still accepted as a synonym for the ENGINE = engine_name table option but generates a warning. You should note that this option is not available in MySQL 5.1.7, and is removed altogether as of MySQL 5.4 and produces a syntax error. TYPE has been deprecated since MySQL 4.0. * Incompatible change: The namespace for triggers changed in MySQL 5.0.10. Previously, trigger names had to be unique per table. Now they must be unique within the schema (database). An implication of this change is that DROP TRIGGER syntax now uses a schema name instead of a table name (schema name is optional and, if omitted, the current schema will be used). When upgrading from a version of MySQL 5 older than 5.0.10 to MySQL 5.0.10 or newer, you must drop all triggers and re-create them or DROP TRIGGER will not work after the upgrade. Here is a suggested procedure for doing this: 1. Upgrade to MySQL 5.0.10 or later to be able to access trigger information in the INFORMATION_SCHEMA.TRIGGERS table. (This should work even for pre-5.0.10 triggers.) 2. Dump all trigger definitions using the following SELECT statement: SELECT CONCAT('CREATE TRIGGER ', t.TRIGGER_SCHEMA, '.', t.TRIGGER_NAM E, ' ', t.ACTION_TIMING, ' ', t.EVENT_MANIPULATION, ' ON ' , t.EVENT_OBJECT_SCHEMA, '.', t.EVENT_OBJECT_TABLE, ' FOR EACH ROW ', t.ACTION_STATEMENT, '//' ) INTO OUTFILE '/tmp/triggers.sql' FROM INFORMATION_SCHEMA.TRIGGERS AS t; The statement uses INTO OUTFILE, so you must have the FILE privilege. The file will be created on the server host. Use a different file name if you like. To be 100% safe, inspect the trigger definitions in the triggers.sql file, and perhaps make a backup of the file. 3. Stop the server and drop all triggers by removing all .TRG files in your database directories. Change location to your data directory and issue this command: shell> rm */*.TRG 4. Start the server and re-create all triggers using the triggers.sql file: mysql> delimiter // ; mysql> source /tmp/triggers.sql // 5. Check that all triggers were successfully created using the SHOW TRIGGERS statement. * Incompatible change: MySQL 5.1.6 introduces the TRIGGER privilege. Previously, the SUPER privilege was needed to create or drop triggers. Now those operations require the TRIGGER privilege. This is a security improvement because you no longer need to grant users the SUPER privilege to enable them to create triggers. However, the requirement that the account named in a trigger's DEFINER clause must have the SUPER privilege has changed to a requirement for the TRIGGER privilege. When upgrading from a previous version of MySQL 5.0 or 5.1 to MySQL 5.1.6 or newer, be sure to update your grant tables by running mysql_upgrade. This will assign the TRIGGER privilege to all accounts that had the SUPER privilege. If you fail to update the grant tables, triggers may fail when activated. After updating the grant tables, you can revoke the SUPER privilege from those accounts that no longer otherwise require it. * Some keywords may be reserved in MySQL 5.1 that were not reserved in MySQL 5.0. See Section 8.3, "Reserved Words." * The BACKUP TABLE, and RESTORE TABLE statements are deprecated. mysqldump or mysqlhotcopy can be used as alternatives. * The LOAD DATA FROM MASTER and LOAD TABLE FROM MASTER statements are deprecated. See Section 12.5.2.2, "LOAD DATA FROM MASTER Syntax," for recommended alternatives. * The INSTALL PLUGIN and UNINSTALL PLUGIN statements that are used for the plugin API are new. So is the WITH PARSER clause for FULLTEXT index creation that associates a parser plugin with a full-text index. Section 22.2, "The MySQL Plugin API." C API Changes: * Incompatible change: As of MySQL 5.1.7, the mysql_stmt_attr_get() C API function returns a boolean rather than an unsigned int for STMT_ATTR_UPDATE_MAX_LENGTH. (Bug#16144: http://bugs.mysql.com/bug.php?id=16144) 2.4.2. Downgrading MySQL This section describes what you should do to downgrade to an older MySQL version in the unlikely case that the previous version worked better than the new one. If you are downgrading within the same release series (for example, from 5.0.13 to 5.0.12) the general rule is that you just have to install the new binaries on top of the old ones. There is no need to do anything with the databases. As always, however, it is always a good idea to make a backup. The following items form a checklist of things you should do whenever you perform a downgrade: * Read the upgrading section for the release series from which you are downgrading to be sure that it does not have any features you really need. See Section 2.4.1, "Upgrading MySQL." * If there is a downgrading section for that version, you should read that as well. * To see which new features were added between the version to which you are downgrading and your current version, see the change logs (Appendix C, "MySQL Change History"). * Check Section 2.4.3, "Checking Whether Tables or Indexes Must Be Rebuilt," to see whether changes to table formats or to character sets or collations were made between your current version of MySQL and the version to which you are downgrading. If so and these changes result in an incompatibility between MySQL versions, you will need to downgrade the affected tables using the instructions in Section 2.4.4, "Rebuilding or Repairing Tables or Indexes." In most cases, you can move the MySQL format files and data files between different versions on the same architecture as long as you stay within versions for the same release series of MySQL. If you downgrade from one release series to another, there may be incompatibilities in table storage formats. In this case, use mysqldump to dump your tables before downgrading. After downgrading, reload the dump file using mysql or mysqlimport to re-create your tables. For examples, see Section 2.4.5, "Copying MySQL Databases to Another Machine." A typical symptom of a downward-incompatible table format change when you downgrade is that you cannot open tables. In that case, use the following procedure: 1. Stop the older MySQL server that you are downgrading to. 2. Restart the newer MySQL server you are downgrading from. 3. Dump any tables that were inaccessible to the older server by using mysqldump to create a dump file. 4. Stop the newer MySQL server and restart the older one. 5. Reload the dump file into the older server. Your tables should be accessible. It might also be the case that system tables in the mysql database have changed and that downgrading introduces some loss of functionality or requires some adjustments. Here are some examples: * Trigger creation requires the TRIGGER privilege as of MySQL 5.1. In MySQL 5.0, there is no TRIGGER privilege and SUPER is required instead. If you downgrade from MySQL 5.1 to 5.0, you will need to give the SUPER privilege to those accounts that had the TRIGGER privilege in 5.1. * Triggers were added in MySQL 5.0, so if you downgrade from 5.0 to 4.1, you cannot use triggers at all. * The mysql.proc.comment column definition changed between MySQL 5.1 and 5.5. After a downgrade from 5.5 to 5.1, this table is seen as corrupt and in need of repair. To workaround this problem, execute mysql_upgrade from the version of MySQL to which you downgraded. 2.4.2.1. Downgrading to MySQL 5.0 When downgrading to MySQL 5.0 from MySQL 5.1, you should keep in mind the following issues relating to features found in MySQL 5.1, but not in MySQL 5.0: * Partitioning. MySQL 5.0 does not support user-defined partitioning. If a table was created as a partitioned table in 5.1 (or if an table created in a previous version of MySQL was altered to include partitions after an upgrade to 5.1), the table is accessible after downgrade only if you do one of the following: + Export the table using mysqldump and then drop it in MySQL 5.1; import the table again following the downgrade to MySQL 5.0. + Prior to the downgrade, remove the table's partitioning using ALTER TABLE table_name REMOVE PARTITIONING. * Event Scheduler. MySQL 5.0 does not support scheduled events. If your databases contain scheduled event definitions, you should prevent them from being dumped when you use mysqldump by using the --skip-events option. (See Section 4.5.4, "mysqldump --- A Database Backup Program.") * Stored routines. MySQL 5.1.21 added a number of new columns to the mysql.proc table in which stored routine definitions are stored. If you are downgrading from MySQL 5.1.21 or later to MySQL 5.0, you cannot import the MySQL 5.1 routine definitions into MySQL 5.0.46 or earlier using the dump of mysql.proc created by mysqldump (such as when using the --all-databases option). Instead, you should run mysqldump --routines prior to performing the downgrade and run the stored routines DDL statements following the downgrade. See Bug#11986: http://bugs.mysql.com/bug.php?id=11986, Bug#30029: http://bugs.mysql.com/bug.php?id=30029, and Bug#30660: http://bugs.mysql.com/bug.php?id=30660, for more information. * Triggers. Trigger creation requires the TRIGGER privilege as of MySQL 5.1. In MySQL 5.0, there is no TRIGGER privilege and SUPER is required instead. If you downgrade from MySQL 5.1 to 5.0, you will need to give the SUPER privilege to those accounts that had the TRIGGER privilege in 5.1. 2.4.3. Checking Whether Tables or Indexes Must Be Rebuilt A binary upgrade or downgrade is one that installs one version of MySQL "in place" over an existing version, without dumping and reloading tables: 1. Stop the server for the existing version if it is running. 2. Install a different version of MySQL. This is an upgrade if the new version is higher than the original version, a downgrade if the version is lower. 3. Start the server for the new version. In many cases, the tables from the previous version of MySQL can be used without problem by the new version. However, sometimes changes occur that require tables or table indexes to be rebuilt, as described in this section. If you have tables that are affected by any of the issues described here, rebuild the tables or indexes as necessary using the instructions given in Section 2.4.4, "Rebuilding or Repairing Tables or Indexes." Table Incompatibilities After a binary upgrade to MySQL 5.1 from a MySQL 5.0 installation that contains ARCHIVE tables, accessing those tables causes the server to crash, even if you have run mysql_upgrade or CHECK TABLE ... FOR UPGRADE. To work around this problem, use mysqldump to dump all ARCHIVE tables before upgrading, and reload them into MySQL 5.1 after upgrading. The same problem occurs for binary downgrades from MySQL 5.1 to 5.0. Index Incompatibilities If you perform a binary upgrade without dumping and reloading tables, you cannot upgrade directly from MySQL 4.1 to 5.1 or higher. This occurs due to an incompatible change in the MyISAM table index format in MySQL 5.0. Upgrade from MySQL 4.1 to 5.0 and repair all MyISAM tables. Then upgrade from MySQL 5.0 to 5.1 and check and repair your tables. Modifications to the handling of character sets or collations might change the character sort order, which causes the ordering of entries in any index that uses an affected character set or collation to be incorrect. Such changes result in several possible problems: * Comparison results that differ from previous results * Inability to find some index values due to misordered index entries * Misordered ORDER BY results * Tables that CHECK TABLE reports as being in need of repair The solution to these problems is to rebuild any indexes that use an affected character set or collation, either by dropping and re-creating the indexes, or by dumping and reloading the entire table. For information about rebuilding indexes, see Section 2.4.4, "Rebuilding or Repairing Tables or Indexes." To check whether a table has indexes that must be rebuilt, consult the following list. It indicates which versions of MySQL introduced character set or collation changes that require indexes to be rebuilt. Each entry indicates the version in which the change occurred and the character sets or collations that the change affects. If the change is associated with a particular bug report, the bug number is given. The list applies both for binary upgrades and downgrades. For example, Bug#27877: http://bugs.mysql.com/bug.php?id=27877 was fixed in MySQL 5.1.24 and 5.4.0, so it applies to upgrades from versions older than 5.1.24 to 5.1.24 or newer, and to downgrades from 5.1.24 or newer to versions older than 5.1.24. In many cases, you can use CHECK TABLE ... FOR UPGRADE to identify tables for which index rebuilding is required. (It will report: Table upgrade required. Please do "REPAIR TABLE `tbl_name`" or dump/reload to fix it!) In these cases, you can also use mysqlcheck --check-upgrade or mysql_upgrade, which execute CHECK TABLE. However, the use of CHECK TABLE applies only after upgrades, not downgrades. Also, CHECK TABLE is not applicable to all storage engines. For details about which storage engines CHECK TABLE supports, see Section 12.4.2.3, "CHECK TABLE Syntax." Changes that cause index rebuilding to be necessary: * MySQL 5.0.48, 5.1.21 (Bug#29461: http://bugs.mysql.com/bug.php?id=29461) Affects indexes for columns that use any of these character sets: eucjpms, euc_kr, gb2312, latin7, macce, ujis Affected tables can be detected by CHECK TABLE ... FOR UPGRADE as of MySQL 5.1.29, 5.4.0 (see Bug#39585: http://bugs.mysql.com/bug.php?id=39585). * MySQL 5.0.48, 5.1.23 (Bug#27562: http://bugs.mysql.com/bug.php?id=27562) Affects indexes that use the ascii_general_ci collation for columns that contain any of these characters: '`' GRAVE ACCENT, '[' LEFT SQUARE BRACKET, '\' REVERSE SOLIDUS, ']' RIGHT SQUARE BRACKET, '~' TILDE Affected tables can be detected by CHECK TABLE ... FOR UPGRADE as of MySQL 5.1.29, 5.4.0 (see Bug#39585: http://bugs.mysql.com/bug.php?id=39585). * MySQL 5.1.24, 5.4.0 (Bug#27877: http://bugs.mysql.com/bug.php?id=27877) Affects indexes that use the utf8_general_ci or ucs2_general_ci collation for columns that contain 'ß' LATIN SMALL LETTER SHARP S (German). Affected tables can be detected by CHECK TABLE ... FOR UPGRADE as of MySQL 5.1.30, 5.4.0 (see Bug#40053: http://bugs.mysql.com/bug.php?id=40053). 2.4.4. Rebuilding or Repairing Tables or Indexes This section describes how to rebuild a table. This can be necessitated by changes to MySQL such as how data types are handled or changes to character set handling. For example, an error in a collation might have been corrected, necessitating a table rebuild to update the indexes for character columns that use the collation. (For examples, see Section 2.4.3, "Checking Whether Tables or Indexes Must Be Rebuilt.") It might also be that a table repair or upgrade should be done as indicated by a table check operation such as that performed by CHECK TABLE, mysqlcheck, or mysql_upgrade. Methods for rebuilding a table include dumping and reloading it, or using ALTER TABLE or REPAIR TABLE. Note If you are rebuilding tables because a different version of MySQL will not handle them after a binary (in-place) upgrade or downgrade, you must use the dump-and-reload method. Dump the tables before upgrading or downgrading using your original version of MySQL. Then reload the tables after upgrading or downgrading. If you use the dump-and-reload method of rebuilding tables only for the purpose of rebuilding indexes, you can perform the dump either before or after upgrading or downgrading. Reloading still must be done afterward. To rebuild a table by dumping and reloading it, use mysqldump to create a dump file and mysql to reload the file: shell> mysqldump db_name t1 > dump.sql shell> mysql db_name < dump.sql To rebuild all the tables in a single database, specify the database name without any following table name: shell> mysqldump db_name > dump.sql shell> mysql db_name < dump.sql To rebuild all tables in all databases, use the --all-databases option: shell> mysqldump --all-databases > dump.sql shell> mysql < dump.sql To rebuild a table with ALTER TABLE, use a "null" alteration; that is, an ALTER TABLE statement that "changes" the table to use the storage engine that it already has. For example, if t1 is a MyISAM table, use this statement: mysql> ALTER TABLE t1 ENGINE = MyISAM; If you are not sure which storage engine to specify in the ALTER TABLE statement, use SHOW CREATE TABLE to display the table definition. If you must rebuild a table because a table checking operation indicates that the table is corrupt or needs an upgrade, you can use REPAIR TABLE if that statement supports the table's storage engine. For example, to repair a MyISAM table, use this statement: mysql> REPAIR TABLE t1; For storage engines such as InnoDB that REPAIR TABLE does not support, use mysqldump to create a dump file and mysql to reload the file, as described earlier. For specifics about which storage engines REPAIR TABLE supports, see Section 12.4.2.6, "REPAIR TABLE Syntax." mysqlcheck --repair provides command-line access to the REPAIR TABLE statement. This can be a more convenient means of repairing tables because you can use the --databases or --all-databases option to repair all tables in specific databases or all databases, respectively: shell> mysqlcheck --repair --databases db_name ... shell> mysqlcheck --repair --all-databases 2.4.5. Copying MySQL Databases to Another Machine You can copy the .frm, .MYI, and .MYD files for MyISAM tables between different architectures that support the same floating-point format. (MySQL takes care of any byte-swapping issues.) See Section 13.5, "The MyISAM Storage Engine." In cases where you need to transfer databases between different architectures, you can use mysqldump to create a file containing SQL statements. You can then transfer the file to the other machine and feed it as input to the mysql client. Use mysqldump --help to see what options are available. The easiest (although not the fastest) way to move a database between two machines is to run the following commands on the machine on which the database is located: shell> mysqladmin -h 'other_hostname' create db_name shell> mysqldump db_name | mysql -h 'other_hostname' db_name If you want to copy a database from a remote machine over a slow network, you can use these commands: shell> mysqladmin create db_name shell> mysqldump -h 'other_hostname' --compress db_name | mysql db_na me You can also store the dump in a file, transfer the file to the target machine, and then load the file into the database there. For example, you can dump a database to a compressed file on the source machine like this: shell> mysqldump --quick db_name | gzip > db_name.gz Transfer the file containing the database contents to the target machine and run these commands there: shell> mysqladmin create db_name shell> gunzip < db_name.gz | mysql db_name You can also use mysqldump and mysqlimport to transfer the database. For large tables, this is much faster than simply using mysqldump. In the following commands, DUMPDIR represents the full path name of the directory you use to store the output from mysqldump. First, create the directory for the output files and dump the database: shell> mkdir DUMPDIR shell> mysqldump --tab=DUMPDIR db_name Then transfer the files in the DUMPDIR directory to some corresponding directory on the target machine and load the files into MySQL there: shell> mysqladmin create db_name # create database shell> cat DUMPDIR/*.sql | mysql db_name # create tables in databas e shell> mysqlimport db_name DUMPDIR/*.txt # load data into tables Do not forget to copy the mysql database because that is where the grant tables are stored. You might have to run commands as the MySQL root user on the new machine until you have the mysql database in place. After you import the mysql database on the new machine, execute mysqladmin flush-privileges so that the server reloads the grant table information. 2.5. Installing MySQL on Windows This section describes the process for installing MySQL on Windows. To run MySQL on Windows, you need the following: * A Windows operating system such as Windows 2000, Windows XP, Windows Vista, Windows Server 2003, or Windows Server 2008. Both 32-bit and 64-bit versions are supported. In addition to running MySQL as a standard application, you can also run the MySQL server as a Windows service. By using a service you can monitor and control the operation of the server through the standard Windows service management tools. For more information, see Section 2.5.5.6, "Starting MySQL as a Windows Service." Generally, you should install MySQL on Windows using an account that has administrator rights. Otherwise, you may encounter problems with certain operations such as editing the PATH environment variable or accessing the Service Control Manager. Once installed, MySQL does not need to be executed using a user with Administrator privileges. * TCP/IP protocol support. * Enough space on the hard drive to unpack, install, and create the databases in accordance with your requirements (generally a minimum of 200 megabytes is recommended.) For a list of limitations within the Windows version of MySQL, see Section D.7.3, "Windows Platform Limitations." In addition to the MySQL Server package, you may need or want additional components to use MySQL with your application or development environment. These include, but are not limited to: * If you plan to connect to the MySQL server via ODBC, you need a Connector/ODBC driver. For more information, including installation and configuration instructions, see Section 21.1, "MySQL Connector/ODBC." * If you plan to use MySQL server with .NET applications, you need the Connector/NET driver. For more information, including installation and configuration instructions, see Section 21.2, "MySQL Connector/NET." MySQL distributions for Windows can be downloaded from http://dev.mysql.com/downloads/. See Section 2.1.3, "How to Get MySQL." MySQL for Windows is available in several distribution formats, detailed below. Generally speaking, you should use a binary distribution that includes an installer. It is simpler to use than the others, and you need no additional tools to get MySQL up and running. The installer for the Windows version of MySQL, combined with a GUI Config Wizard, automatically installs MySQL, creates an option file, starts the server, and secures the default user accounts. * Binary installer distribution. The installable distribution comes packaged as a Microsoft Windows Installer (MSI) package that you can install manually or automatically on your systems. Two formats are available, an essentials package that contains all the files you need to install and configure MySQL, but no additional components, and a complete package that includes MySQL, configuration tools, benchmarks and other components. For more information on the specific differences, see Section 2.5.2, "Choosing An Installation Package" For instructions on installing MySQL using one of the MSI installation packages, see Section 2.5.3, "Installing MySQL with the MSI Package." * Standard binary distribution format packaged as a Zip file containing all of the necessary files that you unpack into your chosen location. This package contains all of the files in the full Windows MSI Installer package, but does not including an installation program. For instructions on installing MySQL using the Zip file, see Section 2.5.5, "Installing MySQL from a noinstall Zip Archive." * The source distribution contains all the code and support files for building the executables using the Visual Studio compiler system. For instructions on building MySQL from source on Windows, see Section 2.5.10, "Installing MySQL from Source on Windows." MySQL on Windows considerations: * Large Table Support If you need tables with a size larger than 4GB, install MySQL on an NTFS or newer file system. Don't forget to use MAX_ROWS and AVG_ROW_LENGTH when you create tables. See Section 12.1.17, "CREATE TABLE Syntax." * MySQL and Virus Checking Software Using virus scanning software such as Norton/Symantec Anti-Virus on directories containing MySQL data and temporary tables can cause issues, both in terms of the performance of MySQL and the virus-scanning software mis-identifying the contents of the files as containing spam. This is because of the fingerprinting mechanism used by the virus scanning software, and the way in which MySQL rapidly updates different files, which may be identified as a potential security risk. After installing MySQL Server, it is recommended that you disable virus scanning on the main directory (datadir) being used to store your MySQL table data. There is usually a system built into the virus scanning software to allow certain directories to be specifically ignored during virus scanning. In addition, by default, MySQL creates temporary files in the standard Windows temporary directory. To prevent the temporary files also being scanned, you should configure a separate temporary directory for MySQL temporary files and add this to the virus scanning exclusion list. To do this, add a configuration option for the tmpdir parameter to your my.ini configuration file. For more information, see Section 2.5.5.2, "Creating an Option File." 2.5.1. Windows Installation Layout For MySQL 5.1 on Windows, the default installation directory is C:\Program Files\MySQL\MySQL Server 5.1. Some Windows users prefer to install in C:\mysql, the directory that formerly was used as the default. However, the layout of the subdirectories remains the same. For MySQL 5.1.23 and earlier, all of the files are located within this parent directory, using the following structure: Table 2.2. Installation Layout for Windows using MySQL 5.1.23 and earlier Directory Contents of Directory bin Client programs and the mysqld server data Log files, databases Docs Manual in CHM format examples Example programs and scripts include Include (header) files lib Libraries scripts Utility scripts share Error message files For MySQL 5.1.24 and later, the default location of data directory was changed. The remainder of the directory structure remains the same: Table 2.3. Installation Layout for Windows using MySQL 5.1.24 and later Directory Contents of Directory bin Client programs and the mysqld server C:\Documents and Settings\All Users\Application Data\MySQL Log files, databases Docs Manual in CHM format examples Example programs and scripts include Include (header) files lib Libraries scripts Utility scripts share Error message files 2.5.2. Choosing An Installation Package For MySQL 5.1, there are three installation packages to choose from when installing MySQL on Windows: Packaging Feature Essentials Complete Zip (No-install) Installer Yes Yes No Directory-only MySQL Server Instance Config Wizard Yes Yes No Test Suite No Yes Yes MySQL Server Yes Yes Yes MySQL Client Programs Yes Yes Yes C Headers/Libraries Yes Yes Yes Embedded Server No Optional Yes Scripts and Examples No Optional Yes In the above table: * Yes indiciates that the component is installed by default. * No indicates that the component is not installed or included. * Optional indicates that the component is included with the package, but not installed unless explicitly requested using the Custom installation mode. The workflow for installing using the MSI installer is shown below: Figure 2.1. Installation Workflow for Windows using MSI Installation Workflow for Windows using MSI The workflow for installing using the MSI installer is shown below: Figure 2.2. Installation Workflow for Windows using Zip Installation Workflow for Windows using Zip Note For the Essentials and Complete packages in the MSI installer, you can select individual components to be installed by using the Custom mode, including disable the components confiurated for installation by default. Full details on the components are suggested uses are provided below for reference: * Windows Essentials --- this package has a file name similar to mysql-essential-5.1.46-win32.msi and is supplied as a Microsoft Installer (MSI) package. The package includes the minimum set of files needed to install MySQL on Windows, including the MySQL Server Instance Config Wizard. This package does not include optional components such as the embedded server, developer headers and libraries or benchmark suite. To install using this package, see Section 2.5.3, "Installing MySQL with the MSI Package." * Windows MSI Installer (Complete) --- this package has a file name similar to mysql-5.1.46-win32.zip and contains all files needed for a complete Windows installation, including the MySQL Server Instance Config Wizard. This package includes optional components such as the embedded server and benchmark suite. To install using this package, see Section 2.5.3, "Installing MySQL with the MSI Package." * Without installer --- this package has a file name similar to mysql-noinstall-5.1.46-win32.zip and contains all the files found in the Complete install package, with the exception of the MySQL Server Instance Config Wizard. This package does not include an automated installer, and must be manually installed and configured. The Essentials package is recommended for most users. Both the Essentials and Complete distributions are available as an .msi file for use with the Windows Installer. The Noinstall distribution is packaged as Zip archives. To use Zip archives, you must have a tool that can unpack .zip files. When using the MSI installers you can automate the installation process. For more information, see Section 2.5.3.2, "Installing MySQL Automatically using MSI." To automate the creation of a MySQL instance, see Section 2.5.4.13, "Creating an Instance from the Command Line." Your choice of install package affects the installation process you must follow. If you choose to install either the Essentials or Complete install packages, see Section 2.5.3, "Installing MySQL with the MSI Package." If you choose to install MySQL from the Noinstall archive, see Section 2.5.5, "Installing MySQL from a noinstall Zip Archive." 2.5.3. Installing MySQL with the MSI Package The MSI package are designed to install and configure MySQL in such a way that you can immediately get started using MySQL. The MySQL Installation Wizard and MySQL Config Wizard are available in the Essentials and Complete install packages. They are recommended for most standard MySQL installations. Exceptions include users who need to install multiple instances of MySQL on a single server host and advanced users who want complete control of server configuration. * For information on installing using the GUI MSI installer process, see Section 2.5.3, "Installing MySQL with the MSI Package." * For information on installing using the command line using the MSI package, see Section 2.5.3.2, "Installing MySQL Automatically using MSI." * If you have previously installed MySQL using the MSI package and want to remove MySQL, see Section 2.5.3.3, "Removing MySQL Installed from the MSI Package." The workflow sequence for using the installer is shown in the figure below: Figure 2.3. Installation Workflow for Windows using MSI Installer Installation Workflow for Windows using MSI Installer Note Microsoft Windows XP and later include a firewall which specifically blocks ports. If you plan on using MySQL through a network port then you should open and create an exception for this port before performing the installation. To check and if necessary add an exception to the firewall settings: 1. First ensure that you are logged in as an Administrator or a user with Administrator privileges. 2. Go to the Control Panel, and double click the Windows Firewall icon. 3. Choose the Allow a program through Windows Firewall option and click the Add port button. 4. Enter MySQL into the Name text box and 3306 (or the port of your choice) into the Port number text box. 5. Also ensure that the TCP protocol radio button is selected. 6. If you wish, you can also limit access to the MySQL server by choosing the Change scope button. 7. Confirm your choices by clicking the OK button. Additionally, when running the MySQL Installation Wizard on Windows Vista, ensure that you are logged in as a user with administrative rights. Note When using Windows Vista, you may want to disable User Account Control (UAC) before performing the installation. If you do not do so, then MySQL may be identified as a security risk, which will mean that you need to enable MySQL. You can disable the security checking by following these instructions: 1. Open Control Panel. 2. Under the User Accounts and Family Safety, select Add or remove user accounts. 3. Click on the Got to the main User Accounts page link. 4. Click on Turn User Account Control on or off. You may be prompted to provide permission to change this setting. Click Continue. 5. Deselect or unceck the checkbox next to Use User Account Control (UAC) to help protect your computer. Click OK to save the setting. You will need to restart to complete the process. Click Restart Now to reboot the machine and apply the changes. You can then follow the instructions below for installing Windows. 2.5.3.1. Using the MySQL Installation Wizard MySQL Installation Wizard is an installer for the MySQL server that uses the latest installer technologies for Microsoft Windows. The MySQL Installation Wizard, in combination with the MySQL Config Wizard, allows a user to install and configure a MySQL server that is ready for use immediately after installation. The MySQL Installation Wizard uses the standard Microsoft Installer Engine (MSI) system is the standard installer for all MySQL server distributions, version 4.1.5 and higher. Users of previous versions of MySQL need to shut down and remove their existing MySQL installations manually before installing MySQL with the MySQL Installation Wizard. See Section 2.5.3.1.6, "Upgrading MySQL with the Installation Wizard," for more information on upgrading from a previous version. If you are upgrading an installation from MySQL 5.1.31 or earlier to MySQL 5.1.32 or later, read the notes provided in Section 2.5.3.1.6, "Upgrading MySQL with the Installation Wizard." The Microsoft Windows Installer Engine was updated with the release of Windows XP; those using a previous version of Windows can reference this Microsoft Knowledge Base article (http://support.microsoft.com/default.aspx?scid=kb;EN-US;292539) for information on upgrading to the latest version of the Windows Installer Engine. In addition, Microsoft has introduced the WiX (Windows Installer XML) toolkit. This is the first highly acknowledged Open Source project from Microsoft. We have switched to WiX because it is an Open Source project and it allows us to handle the complete Windows installation process in a flexible manner using scripts. Improving the MySQL Installation Wizard depends on the support and feedback of users like you. If you find that the MySQL Installation Wizard is lacking some feature important to you, or if you discover a bug, please report it in our bugs database using the instructions given in Section 1.7, "How to Report Bugs or Problems." 2.5.3.1.1. Downloading and Starting the MySQL Installation Wizard The MySQL installation packages can be downloaded from http://dev.mysql.com/downloads/. If the package you download is contained within a Zip archive, you need to extract the archive first. The process for starting the wizard depends on the contents of the installation package you download. If there is a setup.exe file present, double-click it to start the installation process. If there is an .msi file present, double-click it to start the installation process. 2.5.3.1.2. Choosing an Install Type There are three installation types available: Typical, Complete, and Custom. The Typical installation type installs the MySQL server, the mysql command-line client, and the command-line utilities. The command-line clients and utilities include mysqldump, myisamchk, and several other tools to help you manage the MySQL server. The Complete installation type installs all components included in the installation package. The full installation package includes components such as the embedded server library, the benchmark suite, support scripts, and documentation. The Custom installation type gives you complete control over which packages you wish to install and the installation path that is used. See Section 2.5.3.1.3, "The Custom Install Dialog," for more information on performing a custom install. If you choose the Typical or Complete installation types and click the Next button, you advance to the confirmation screen to verify your choices and begin the installation. If you choose the Custom installation type and click the Next button, you advance to the custom installation dialog, described in Section 2.5.3.1.3, "The Custom Install Dialog." 2.5.3.1.3. The Custom Install Dialog If you wish to change the installation path or the specific components that are installed by the MySQL Installation Wizard, choose the Custom installation type. A tree view on the left side of the custom install dialog lists all available components. Components that are not installed have a red X icon; components that are installed have a gray icon. To change whether a component is installed, click on that component's icon and choose a new option from the drop-down list that appears. You can change the default installation path by clicking the Change... button to the right of the displayed installation path. After choosing your installation components and installation path, click the Next button to advance to the confirmation dialog. 2.5.3.1.4. The Confirmation Dialog Once you choose an installation type and optionally choose your installation components, you advance to the confirmation dialog. Your installation type and installation path are displayed for you to review. To install MySQL if you are satisfied with your settings, click the Install button. To change your settings, click the Back button. To exit the MySQL Installation Wizard without installing MySQL, click the Cancel button. After installation is complete, you have the option of registering with the MySQL web site. Registration gives you access to post in the MySQL forums at forums.mysql.com (http://forums.mysql.com), along with the ability to report bugs at bugs.mysql.com (http://bugs.mysql.com) and to subscribe to our newsletter. The final screen of the installer provides a summary of the installation and gives you the option to launch the MySQL Config Wizard, which you can use to create a configuration file, install the MySQL service, and configure security settings. 2.5.3.1.5. Changes Made by MySQL Installation Wizard Once you click the Install button, the MySQL Installation Wizard begins the installation process and makes certain changes to your system which are described in the sections that follow. Changes to the Registry The MySQL Installation Wizard creates one Windows registry key in a typical install situation, located in HKEY_LOCAL_MACHINE\SOFTWARE\MySQL AB. The MySQL Installation Wizard creates a key named after the major version of the server that is being installed, such as MySQL Server 5.1. It contains two string values, Location and Version. The Location string contains the path to the installation directory. In a default installation it contains C:\Program Files\MySQL\MySQL Server 5.1\. The Version string contains the release number. For example, for an installation of MySQL Server 5.1.46, the key contains a value of 5.1.46. These registry keys are used to help external tools identify the installed location of the MySQL server, preventing a complete scan of the hard-disk to determine the installation path of the MySQL server. The registry keys are not required to run the server, and if you install MySQL using the noinstall Zip archive, the registry keys are not created. Changes to the Start Menu The MySQL Installation Wizard creates a new entry in the Windows Start menu under a common MySQL menu heading named after the major version of MySQL that you have installed. For example, if you install MySQL 5.1, the MySQL Installation Wizard creates a MySQL Server 5.1 section in the Start menu. The following entries are created within the new Start menu section: * MySQL Command Line Client: This is a shortcut to the mysql command-line client and is configured to connect as the root user. The shortcut prompts for a root user password when you connect. * MySQL Server Instance Config Wizard: This is a shortcut to the MySQL Config Wizard. Use this shortcut to configure a newly installed server, or to reconfigure an existing server. * MySQL Documentation: This is a link to the MySQL server documentation that is stored locally in the MySQL server installation directory. This option is not available when the MySQL server is installed using the Essentials installation package. Changes to the File System The MySQL Installation Wizard by default installs the MySQL 5.1 server to C:\Program Files\MySQL\MySQL Server 5.1, where Program Files is the default location for applications in your system, and 5.1 is the major version of your MySQL server. This is the recommended location for the MySQL server, replacing the former default location C:\mysql. By default, all MySQL applications are stored in a common directory at C:\Program Files\MySQL, where Program Files is the default location for applications in your Windows installation. A typical MySQL installation on a developer machine might look like this: C:\Program Files\MySQL\MySQL Server 5.1 C:\Program Files\MySQL\MySQL Workbench 5.1 OSS This approach makes it easier to manage and maintain all MySQL applications installed on a particular system. In MySQL 5.1.23 and earlier, the default location for the data files used by MySQL is located within the corresponding MySQL Server installation directory. For MySQL 5.1.24 and later, the default location of the data directory is the AppData directory configured for the user that installed the MySQL application. 2.5.3.1.6. Upgrading MySQL with the Installation Wizard The MySQL Installation Wizard can perform server upgrades automatically using the upgrade capabilities of MSI. That means you do not need to remove a previous installation manually before installing a new release. The installer automatically shuts down and removes the previous MySQL service before installing the new version. Automatic upgrades are available only when upgrading between installations that have the same major and minor version numbers. For example, you can upgrade automatically from MySQL 5.1.34 to MySQL 5.1.37, but not from MySQL 5.0 to MySQL 5.1. In MySQL 5.1.32 and later, the EXE version of the MSI installer packages were removed. When upgrading an existing MySQL installation from the old EXE based installer to the MSI based installer, please keep the following notes in mind: * The MSI installer will not identify an existing installation that was installed using the old EXE installer. This means that the installer will not stop the existing server, or detect that the existing password is required before installing the new version. To work around this: 1. Stop the current server manually using net stop or mysqladmin shutdown. 2. Remove the existing installation manually by using the Add/Remove Programs control panel. This will keep the existing configuration and data files, as these are not removed automatically. 3. Install the new version of MySQL using the MSI installer. When running the installation, skip updating the security by deselecting the checkbox on the security screen. 4. Complete the installation, and then start the server again. You should be able to login with your existing user and password credentials. * You can only upgrade the version and release using the MSI installer. For example, you can upgrade an open source installation with an open source installer. You cannot upgrade an open source installation using the enterprise installer. See Section 2.5.7, "Upgrading MySQL on Windows." 2.5.3.2. Installing MySQL Automatically using MSI The Microsoft Installer (MSI) supports a both a quiet and a passive mode that can be used to install MySQL automatically without requireing intervention. You can use this either in scripts to automatically install MySQL or through a terminal connection such as Telnet where you do not have access to the standard Windows user interface. The MSI packages can also be used in combination with Microsoft's Group Policy system (part of Windows Server 2003 and Windows Server 2008) to install MySQL across multiple machines. To install MySQL from one of the MSI packages automatically from the command line (or within a script), you need to use the msiexec.exe tool. For example, to perform a quiet installation (which shows no dialog boxes or progress): shell> msiexec /i /quiet mysql-5.1.39.msi The /i indicates that you want to perform an installation. The /quiet option indicates that you want no interactive elements. To provide a dialog box showing the progress during installation, and the dialog boxes providing information on the installation and registration of MySQL, use /passive mode instead of /quiet: shell> msiexec /i /passive mysql-5.1.39.msi Regardless of the mode of the installation, installing the package in this manner performs a 'Typical' installation, and installs the default components into the standard location. You can also use this method to uninstall MySQL by using the /uninstall or /x options: shell> msiexec /x /quiet mysql-5.1.39.msi To install MySQL and configure a MySQL instance from the command line, see Section 2.5.4.13, "Creating an Instance from the Command Line." For information on using MSI packages to install software automatically using Group Policy, see How to use Group Policy to remotely install software in Windows Server 2003 (http://support.microsoft.com/kb/816102). 2.5.3.3. Removing MySQL Installed from the MSI Package To uninstall a MySQL where you have used the MSI packages, you must use the Add/Remove Programs tool within Control Panel. To do this: 1. Right click on the start menu and choose Control Panel. 2. If the Control Panel is set to category mode (you will see Pick a category at the top of the Control Panel window), double click on Add or Remove Programs. If the Control is set to classic mode, doubgle click on the Add or Remove Programs icon. 3. Find MySQL in the list of installed software. MySQL Server is installed against major version numbers (MySQL 5.0, MySQL 5.1, etc.). Select the version that you want to remove and click Remove. 4. You will be prompted to confirm the removal. Click Yes to remove MySQL. When MySQL is removed using this method, only the installed components are removed. Any database information (including the tables and data), import or export files, log files, and binary logs produced during execution are kept in their configured location. 2.5.4. MySQL Server Instance Config Wizard The MySQL Server Instance Config Wizard helps automate the process of configuring your server. It creates a custom MySQL configuration file (my.ini or my.cnf) by asking you a series of questions and then applying your responses to a template to generate the configuration file that is tuned to your installation. The complete and essential MSI installation packages include the MySQL Server Instance Config Wizard in the MySQL 5.1 server. The MySQL Server Instance Config Wizard is only available for Windows. The workflow sequence for using the MySQL Server Instance Config Wizard is shown in the figure below: Figure 2.4. MySQL Server Instance Config Wizard Workflow MySQL Server Instance Config Wizard Workflow 2.5.4.1. Starting the MySQL Server Instance Config Wizard The MySQL Server Instance Config Wizard is normally started as part of the installation process. You should only need to run the MySQL Server Instance Config Wizard again when you need to change the configuration parameters of your server. If you chose not to open a port prior to installing MySQL on Windows Vista, you can choose to use the MySQL Server Instance Config Wizard after installation. However, you must open a port in the Windows Firewall. To do this see the instructions given in Section 2.5.3.1.1, "Downloading and Starting the MySQL Installation Wizard." Rather than opening a port, you also have the option of adding MySQL as a program that bypasses the Windows Firewall. One or the other option is sufficient --- you need not do both. Additionally, when running the MySQL Server Config Wizard on Windows Vista ensure that you are logged in as a user with administrative rights. MySQL Server Instance Config Wizard You can launch the MySQL Config Wizard by clicking the MySQL Server Instance Config Wizard entry in the MySQL section of the Windows Start menu. Alternatively, you can navigate to the bin directory of your MySQL installation and launch the MySQLInstanceConfig.exe file directly. The MySQL Server Instance Config Wizard places the my.ini file in the installation directory for the MySQL server. This helps associate configuration files with particular server instances. To ensure that the MySQL server knows where to look for the my.ini file, an argument similar to this is passed to the MySQL server as part of the service installation: --defaults-file="C:\Program Files\MySQL\MySQL Server 5.1\my.ini" Here, C:\Program Files\MySQL\MySQL Server 5.1 is replaced with the installation path to the MySQL Server. The --defaults-file option instructs the MySQL server to read the specified file for configuration options when it starts. Apart from making changes to the my.ini file by running the MySQL Server Instance Config Wizard again, you can modify it by opening it with a text editor and making any necessary changes. You can also modify the server configuration with the http://www.mysql.com/products/administrator/ utility. For more information about server configuration, see Section 5.1.2, "Server Command Options." MySQL clients and utilities such as the mysql and mysqldump command-line clients are not able to locate the my.ini file located in the server installation directory. To configure the client and utility applications, create a new my.ini file in the Windows installation directory (for example, C:\WINDOWS). Under Windows Server 2003, Windows Server 2000, Windows XP, and Windows Vista MySQL Server Instance Config Wizard will configure MySQL to work as a Windows service. To start and stop MySQL you use the Services application that is supplied as part of the Windows Administrator Tools. 2.5.4.2. Choosing a Maintenance Option If the MySQL Server Instance Config Wizard detects an existing configuration file, you have the option of either reconfiguring your existing server, or removing the server instance by deleting the configuration file and stopping and removing the MySQL service. To reconfigure an existing server, choose the Re-configure Instance option and click the Next button. Any existing configuration file is not overwritten, but renamed (within the same directory) using a timestamp (Windows) or sequential number (Linux). To remove the existing server instance, choose the Remove Instance option and click the Next button. If you choose the Remove Instance option, you advance to a confirmation window. Click the Execute button. The MySQL Server Config Wizard stops and removes the MySQL service, and then deletes the configuration file. The server installation and its data folder are not removed. If you choose the Re-configure Instance option, you advance to the Configuration Type dialog where you can choose the type of installation that you wish to configure. 2.5.4.3. Choosing a Configuration Type When you start the MySQL Server Instance Config Wizard for a new MySQL installation, or choose the Re-configure Instance option for an existing installation, you advance to the Configuration Type dialog. MySQL Server Instance Config Wizard: Configuration Type There are two configuration types available: Detailed Configuration and Standard Configuration. The Standard Configuration option is intended for new users who want to get started with MySQL quickly without having to make many decisions about server configuration. The Detailed Configuration option is intended for advanced users who want more fine-grained control over server configuration. If you are new to MySQL and need a server configured as a single-user developer machine, the Standard Configuration should suit your needs. Choosing the Standard Configuration option causes the MySQL Config Wizard to set all configuration options automatically with the exception of Service Options and Security Options. The Standard Configuration sets options that may be incompatible with systems where there are existing MySQL installations. If you have an existing MySQL installation on your system in addition to the installation you wish to configure, the Detailed Configuration option is recommended. To complete the Standard Configuration, please refer to the sections on Service Options and Security Options in Section 2.5.4.10, "The Service Options Dialog," and Section 2.5.4.11, "The Security Options Dialog," respectively. 2.5.4.4. The Server Type Dialog There are three different server types available to choose from. The server type that you choose affects the decisions that the MySQL Server Instance Config Wizard makes with regard to memory, disk, and processor usage. MySQL Server Instance Config Wizard: Server Type * Developer Machine: Choose this option for a typical desktop workstation where MySQL is intended only for personal use. It is assumed that many other desktop applications are running. The MySQL server is configured to use minimal system resources. * Server Machine: Choose this option for a server machine where the MySQL server is running alongside other server applications such as FTP, email, and Web servers. The MySQL server is configured to use a moderate portion of the system resources. * Dedicated MySQL Server Machine: Choose this option for a server machine that is intended to run only the MySQL server. It is assumed that no other applications are running. The MySQL server is configured to use all available system resources. Note By selecting one of the preconfigured configurations, the values and settings of various options in your my.cnf or my.ini will be altered accordingly. The default values and options as described in the reference manual may therefore be different to the options and values that were created during the execution of the Config Wizard. 2.5.4.5. The Database Usage Dialog The Database Usage dialog allows you to indicate the storage engines that you expect to use when creating MySQL tables. The option you choose determines whether the InnoDB storage engine is available and what percentage of the server resources are available to InnoDB. MySQL Server Instance Config Wizard: Usage Dialog * Multifunctional Database: This option enables both the InnoDB and MyISAM storage engines and divides resources evenly between the two. This option is recommended for users who use both storage engines on a regular basis. * Transactional Database Only: This option enables both the InnoDB and MyISAM storage engines, but dedicates most server resources to the InnoDB storage engine. This option is recommended for users who use InnoDB almost exclusively and make only minimal use of MyISAM. * Non-Transactional Database Only: This option disables the InnoDB storage engine completely and dedicates all server resources to the MyISAM storage engine. This option is recommended for users who do not use InnoDB. The Config Wizard uses a template to generate the server configuration file. The Database Usage dialog sets one of the following option strings: Multifunctional Database: MIXED Transactional Database Only: INNODB Non-Transactional Database Only: MYISAM When these options are processed through the default template (my-template.ini) the result is: Multifunctional Database: default-storage-engine=InnoDB _myisam_pct=50 Transactional Database Only: default-storage-engine=InnoDB _myisam_pct=5 Non-Transactional Database Only: default-storage-engine=MyISAM _myisam_pct=100 skip-innodb The _myisam_pct value is used to calculate the percentage of resources dedicated to MyISAM. The remaining resources are allocated to InnoDB. 2.5.4.6. The InnoDB Tablespace Dialog Some users may want to locate the InnoDB tablespace files in a different location than the MySQL server data directory. Placing the tablespace files in a separate location can be desirable if your system has a higher capacity or higher performance storage device available, such as a RAID storage system. MySQL Server Instance Config Wizard: InnoDB Data Tablespace To change the default location for the InnoDB tablespace files, choose a new drive from the drop-down list of drive letters and choose a new path from the drop-down list of paths. To create a custom path, click the ... button. If you are modifying the configuration of an existing server, you must click the Modify button before you change the path. In this situation you must move the existing tablespace files to the new location manually before starting the server. 2.5.4.7. The Concurrent Connections Dialog To prevent the server from running out of resources, it is important to limit the number of concurrent connections to the MySQL server that can be established. The Concurrent Connections dialog allows you to choose the expected usage of your server, and sets the limit for concurrent connections accordingly. It is also possible to set the concurrent connection limit manually. MySQL Server Instance Config Wizard: Connections * Decision Support (DSS)/OLAP: Choose this option if your server does not require a large number of concurrent connections. The maximum number of connections is set at 100, with an average of 20 concurrent connections assumed. * Online Transaction Processing (OLTP): Choose this option if your server requires a large number of concurrent connections. The maximum number of connections is set at 500. * Manual Setting: Choose this option to set the maximum number of concurrent connections to the server manually. Choose the number of concurrent connections from the drop-down box provided, or enter the maximum number of connections into the drop-down box if the number you desire is not listed. 2.5.4.8. The Networking and Strict Mode Options Dialog Use the Networking Options dialog to enable or disable TCP/IP networking and to configure the port number that is used to connect to the MySQL server. MySQL Server Instance Config Wizard: Network Configuration TCP/IP networking is enabled by default. To disable TCP/IP networking, uncheck the box next to the Enable TCP/IP Networking option. Port 3306 is used by default. To change the port used to access MySQL, choose a new port number from the drop-down box or type a new port number directly into the drop-down box. If the port number you choose is in use, you are prompted to confirm your choice of port number. Set the Server SQL Mode to either enable or disable strict mode. Enabling strict mode (default) makes MySQL behave more like other database management systems. If you run applications that rely on MySQL's old "forgiving" behavior, make sure to either adapt those applications or to disable strict mode. For more information about strict mode, see Section 5.1.8, "Server SQL Modes." 2.5.4.9. The Character Set Dialog The MySQL server supports multiple character sets and it is possible to set a default server character set that is applied to all tables, columns, and databases unless overridden. Use the Character Set dialog to change the default character set of the MySQL server. MySQL Server Instance Config Wizard: Character Set * Standard Character Set: Choose this option if you want to use latin1 as the default server character set. latin1 is used for English and many Western European languages. * Best Support For Multilingualism: Choose this option if you want to use utf8 as the default server character set. This is a Unicode character set that can store characters from many different languages. * Manual Selected Default Character Set / Collation: Choose this option if you want to pick the server's default character set manually. Choose the desired character set from the provided drop-down list. 2.5.4.10. The Service Options Dialog On Windows platforms, the MySQL server can be installed as a Windows service. When installed this way, the MySQL server can be started automatically during system startup, and even restarted automatically by Windows in the event of a service failure. The MySQL Server Instance Config Wizard installs the MySQL server as a service by default, using the service name MySQL. If you do not wish to install the service, uncheck the box next to the Install As Windows Service option. You can change the service name by picking a new service name from the drop-down box provided or by entering a new service name into the drop-down box. Note Service names can include any legal character except forward (/) or backward (\) slashes, and must be less than 256 characters long. Warning If you are installing multiple versions of MySQL onto the same machine, you must choose a different service name for each version that you install. If you do not choose a different service for each installed version then the service manager information will be inconsistent and this will cause problems when you try to uninstall a previous version. If you have already installed multiple versions using the same service name, you must manually edit the contents of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services parameters within the Windows registry to update the association of the service name with the correct server version. Typically, when installing multiple versions you create a service name based on the version information. For example, you might install MySQL 5.x as mysql5, or specific versions such as MySQL 5.1.30 as mysql50130. To install the MySQL server as a service but not have it started automatically at startup, uncheck the box next to the Launch the MySQL Server Automatically option. 2.5.4.11. The Security Options Dialog The content of the security options portion of the MySQL Server Instance Configuration Wizard will depend on whether this is a new installation, or modifying an existing installation. * Setting the root password for a new installation It is strongly recommended that you set a root password for your MySQL server, and the MySQL Server Instance Config Wizard requires by default that you do so. If you do not wish to set a root password, uncheck the box next to the Modify Security Settings option. MySQL Server Instance Config Wizard: Security * To set the root password, enter the desired password into both the New root password and Confirm boxes. Setting the root password for an existing installation If you are modifying the configuration of an existing configuration, or you are installing an upgrade and the MySQL Server Instance Configuration Wizard has detected an existing MySQL system, then you must enter the existing password for root before changing the configuration information. MySQL Server Instance Config Wizard: Security (Existing Installation) If you want to change the current root password, enter the desired new password into both the New root password and Confirm boxes. To allow root logins from across the network, check the box next to the Enable root access from remote machines option. This decreases the security of your root account. To create an anonymous user account, check the box next to the Create An Anonymous Account option. Creating an anonymous account can decrease server security and cause login and permission difficulties. For this reason, it is not recommended. 2.5.4.12. The Confirmation Dialog The final dialog in the MySQL Server Instance Config Wizard is the Confirmation Dialog. To start the configuration process, click the Execute button. To return to a previous dialog, click the Back button. To exit the MySQL Server Instance Config Wizard without configuring the server, click the Cancel button. MySQL Server Instance Config Wizard: Confirmation After you click the Execute button, the MySQL Server Instance Config Wizard performs a series of tasks and displays the progress onscreen as the tasks are performed. The MySQL Server Instance Config Wizard first determines configuration file options based on your choices using a template prepared by MySQL developers and engineers. This template is named my-template.ini and is located in your server installation directory. The MySQL Config Wizard then writes these options to the corresponding configuration file. If you chose to create a service for the MySQL server, the MySQL Server Instance Config Wizard creates and starts the service. If you are reconfiguring an existing service, the MySQL Server Instance Config Wizard restarts the service to apply your configuration changes. If you chose to set a root password, the MySQL Config Wizard connects to the server, sets your new root password, and applies any other security settings you may have selected. After the MySQL Server Instance Config Wizard has completed its tasks, it displays a summary. Click the Finish button to exit the MySQL Server Config Wizard. 2.5.4.13. Creating an Instance from the Command Line In addition to using the GUI interface to the MySQL Server Instance Config Wizard, you can also create instances automatically from the command line. To use the MySQL Server Instance Config Wizard on the command line, you need to use the MySQLInstanceConfig.exe command that is installed with MySQL in the bin directory within the installation directory. MySQLInstanceConfig.exe takes a number of command-line arguments the set the properties that would normally be selected through the GUI interface, and then creates a new configuration file (my.ini) by combining these selections with a template configuration file to produce the working configuration file. The main command line options are provided in the table below. Some of the options are required, while some options are optional. Table 2.4. MySQL Server Instance Config Wizard Command Line Options Option Description Required Parameters -nPRODUCTNAME The name of the instance when installed -pPATH Path of the base directory for installation. This is equivalent to the directory when using the basedir configuration parameter -vVERSION The version tag to use for this installation Action to Perform -i Install an instance -r Remove an instance -s Stop an existing instance -q Perform the operation quietly -lFILENAME Sae the installation progress in a logfile Config File to Use -tFILENAME Path to the template config file that will be used to generate the installed configuration file -cFILENAME Path to a config file to be generated The -t and -c options work together to set the configuration parameters for a new instance. The -t option specifies the template configuration file to use as the basic configuration, which are then merged with the configuration parameters generated by the MySQL Server Instance Config Wizard into the configuration file specified by the -c option. A sample template file, my-template.ini is provided in the toplevel MySQL installation directory. The file contains elements are replaced automatically by the MySQL Server Instance Config Wizard during configuration. If you specify a configuration file that already exists, the existing configuration file will be saved in the file with the original, with the date and time added. For example, the mysql.ini will be copied to mysql 2009-10-27 1646.ini.bak. The parameters that you can specify on the command line are listed in the table below. Table 2.5. MySQL Server Instance Config Wizard Parameters Parameter Description ServiceName=$ Specify the name of the service to be created AddBinToPath={yes | no} Specifies whether to add the binary directory of MySQL to the standard PATH environment variable ServerType={DEVELOPMENT | SERVER | DEDICATED} Specify the server type. For more information, see Section 2.5.4.4, "The Server Type Dialog" DatabaseType={MIXED | INNODB | MYISAM} Specify the default database type. For more information, see Section 2.5.4.5, "The Database Usage Dialog" ConnectionUsage={DSS | OLTP} Specify the type of connection support, this automates the setting for the number of concurrent connections (see the ConnectionCount parameter). For more information, see Section 2.5.4.7, "The Concurrent Connections Dialog" ConnectionCount=# Specify the number of concurrent connections to support. For more information, see Section 2.5.4.4, "The Server Type Dialog" SkipNetworking={yes | no} Specify whether network support should be supported. Specifying yes disables network access altogether Port=# Specify the network port number to use for network connections. For more information, see Section 2.5.4.8, "The Networking and Strict Mode Options Dialog" StrictMode={yes | no} Specify whether to use the strict SQL mode. For more information, see Section 2.5.4.8, "The Networking and Strict Mode Options Dialog" Charset=$ Specify the default character set. For more information, see Section 2.5.4.9, "The Character Set Dialog" RootPassword=$ Specify the root password RootCurrentPassword=$ Specify the current root password then stopping and/or reconfiguring an existing service Note When specifying options on the command line, you can enclose the entire command-line option and the value you are specifying using double quotes. This enables you to use spaces in the options. For example, "-cC:\mysql.ini". The following command installs a MySQL Server 5.1 instance from the directory C:\Program Files\MySQL\MySQL Server 5.1 using the service name MySQL51 and setting the root password to 1234. shell> MySQLInstanceConfig.exe -i -q "-lC:\mysql_install_log.txt" » "-nMySQL Server 5.1" "-pC:\Program Files\MySQL\MySQL Server 5.1" - v5.1.39 » "-tmy-template.ini" "-cC:\mytest.ini" ServerType=DEVELOPMENT Datab aseType=MIXED » ConnectionUsage=DSS Port=3311 ServiceName=MySQL51 RootPassword=123 4 In the above example, a log file will be generated in mysql_install_log.txt containing the information about the instance creation process. The log file generated by the above example is shown below: Welcome to the MySQL Server Instance Configuration Wizard 1.0.16.0 Date: 2009-10-27 17:07:21 Installing service ... Product Name: MySQL Server 5.1 Version: 5.1.39 Installation Path: C:\Program Files\MySQL\MySQL Server 5.1\ Creating configuration file C:\mytest.ini using template my-template. ini. Options: DEVELOPMENT MIXED DSS STRICTMODE Variables: port: 3311 default-character-set: latin1 basedir: "C:/Program Files/MySQL/MySQL Server 5.1/" datadir: "C:/Program Files/MySQL/MySQL Server 5.1/Data/" Creating Windows service entry. Service name: "MySQL51" Parameters: "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld" -- defaults-file="C:\mytest.ini" MySQL51. Windows service MySQL51 installed. When using the command-line, the return values in the following table indicate an error performing the specified option. Table 2.6. Return Value from MySQL Server Instance Config Wizard Value Description 2 Configuration template file cannot be found 3 The Windows service entry cannot be created 4 Could not connect to the Service Control Manager 5 The MySQL service cannot be started 6 The MySQL service cannot be stopped 7 The security settings cannot be applied 8 The configuration file cannot be written 9 The Windows service entry cannot be removed You can perform an installation of MySQL automatically using the MSI packe. For more information, see Section 2.5.3.2, "Installing MySQL Automatically using MSI." 2.5.5. Installing MySQL from a noinstall Zip Archive Users who are installing from the noinstall package can use the instructions in this section to manually install MySQL. The process for installing MySQL from a Zip archive is as follows: 1. Extract the archive to the desired install directory 2. Create an option file 3. Choose a MySQL server type 4. Start the MySQL server 5. Secure the default user accounts This process is described in the sections that follow. 2.5.5.1. Extracting the Install Archive To install MySQL manually, do the following: 1. If you are upgrading from a previous version please refer to Section 2.5.7, "Upgrading MySQL on Windows," before beginning the upgrade process. 2. Make sure that you are logged in as a user with administrator privileges. 3. Choose an installation location. Traditionally, the MySQL server is installed in C:\mysql. The MySQL Installation Wizard installs MySQL under C:\Program Files\MySQL. If you do not install MySQL at C:\mysql, you must specify the path to the install directory during startup or in an option file. See Section 2.5.5.2, "Creating an Option File." 4. Extract the install archive to the chosen installation location using your preferred Zip archive tool. Some tools may extract the archive to a folder within your chosen installation location. If this occurs, you can move the contents of the subfolder into the chosen installation location. 2.5.5.2. Creating an Option File If you need to specify startup options when you run the server, you can indicate them on the command line or place them in an option file. For options that are used every time the server starts, you may find it most convenient to use an option file to specify your MySQL configuration. This is particularly true under the following circumstances: * The installation or data directory locations are different from the default locations (C:\Program Files\MySQL\MySQL Server 5.1 and C:\Program Files\MySQL\MySQL Server 5.1\data). * You need to tune the server settings, such as memory, cache, or InnoDB configuration information. When the MySQL server starts on Windows, it looks for option files in several locations, such as the Windows directory, C:\, and the MySQL installation directory (for the full list of locations, see Section 4.2.3.3, "Using Option Files"). The Windows directory typically is named something like C:\WINDOWS. You can determine its exact location from the value of the WINDIR environment variable using the following command: C:\> echo %WINDIR% MySQL looks for options in each location first in the my.ini file, and then in the my.cnf file. However, to avoid confusion, it is best if you use only one file. If your PC uses a boot loader where C: is not the boot drive, your only option is to use the my.ini file. Whichever option file you use, it must be a plain text file. You can also make use of the example option files included with your MySQL distribution; see Section 4.2.3.3.2, "Preconfigured Option Files." An option file can be created and modified with any text editor, such as Notepad. For example, if MySQL is installed in E:\mysql and the data directory is in E:\mydata\data, you can create an option file containing a [mysqld] section to specify values for the basedir and datadir options: [mysqld] # set basedir to your installation path basedir=E:/mysql # set datadir to the location of your data directory datadir=E:/mydata/data Note that Windows path names are specified in option files using (forward) slashes rather than backslashes. If you do use backslashes, double them: [mysqld] # set basedir to your installation path basedir=E:\\mysql # set datadir to the location of your data directory datadir=E:\\mydata\\data The rules for use of backslash in option file values are given in Section 4.2.3.3, "Using Option Files." MySQL Enterprise For expert advice on the start-up options appropriate to your circumstances, subscribe to the MySQL Enterprise Monitor. For more information, see http://www.mysql.com/products/enterprise/advisors.html. In MySQL 5.1.23 and earlier, the MySQL installer places the data directory directly under the directory where you install MySQL. On MySQL 5.1.24 and later, the data directory is located within the AppData directory for the user running MySQL. If you would like to use a data directory in a different location, you should copy the entire contents of the data directory to the new location. For example, if you want to use E:\mydata as the data directory instead, you must do two things: 1. Move the entire data directory and all of its contents from the default location (for example C:\Program Files\MySQL\MySQL Server 5.1\data) to E:\mydata. 2. Use a --datadir option to specify the new data directory location each time you start the server. 2.5.5.3. Selecting a MySQL Server Type The following table shows the available servers for Windows in MySQL 5.1.20 and earlier. Binary Description mysqld-nt Optimized binary with named-pipe support mysqld Optimized binary without named-pipe support mysqld-debug Like mysqld-nt, but compiled with full debugging and automatic memory allocation checking The following table shows the available servers for Windows in MySQL 5.1.21 and later. Binary Description mysqld Optimized binary with named-pipe support mysqld-debug Like mysqld, but compiled with full debugging and automatic memory allocation checking All of the preceding binaries are optimized for modern Intel processors, but should work on any Intel i386-class or higher processor. Each of the servers in a distribution support the same set of storage engines. The SHOW ENGINES statement displays which engines a given server supports. All Windows MySQL 5.1 servers have support for symbolic linking of database directories. MySQL supports TCP/IP on all Windows platforms. MySQL servers on Windows support named pipes as indicated in the following list. However, the default is to use TCP/IP regardless of platform. (Named pipes are slower than TCP/IP in many Windows configurations.) Use of named pipes is subject to these conditions: * Named pipes are enabled only if you start the server with the --enable-named-pipe option. It is necessary to use this option explicitly because some users have experienced problems with shutting down the MySQL server when named pipes were used. * For MySQL 5.1.20 and earlier, named-pipe connections are allowed only by the mysqld-nt and mysqld-debug servers. For MySQL 5.1.21 and later, the mysqld and mysqld-debug servers both contain support for named-pipe connections. Note Most of the examples in this manual use mysqld as the server name. If you choose to use a different server, such as mysqld-nt or mysqld-debug, make the appropriate substitutions in the commands that are shown in the examples. 2.5.5.4. Starting the Server for the First Time This section gives a general overview of starting the MySQL server. The following sections provide more specific information for starting the MySQL server from the command line or as a Windows service. The information here applies primarily if you installed MySQL using the Noinstall version, or if you wish to configure and test MySQL manually rather than with the GUI tools. The examples in these sections assume that MySQL is installed under the default location of C:\Program Files\MySQL\MySQL Server 5.1. Adjust the path names shown in the examples if you have MySQL installed in a different location. Clients have two options. They can use TCP/IP, or they can use a named pipe if the server supports named-pipe connections. MySQL for Windows also supports shared-memory connections if the server is started with the --shared-memory option. Clients can connect through shared memory by using the --protocol=MEMORY option. For information about which server binary to run, see Section 2.5.5.3, "Selecting a MySQL Server Type." Testing is best done from a command prompt in a console window (or "DOS window"). In this way you can have the server display status messages in the window where they are easy to see. If something is wrong with your configuration, these messages make it easier for you to identify and fix any problems. To start the server, enter this command: C:\> "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld" --console For a server that includes InnoDB support, you should see the messages similar to those following as it starts (the path names and sizes may differ): InnoDB: The first specified datafile c:\ibdata\ibdata1 did not exist: InnoDB: a new database to be created! InnoDB: Setting file c:\ibdata\ibdata1 size to 209715200 InnoDB: Database physically writes the file full: wait... InnoDB: Log file c:\iblogs\ib_logfile0 did not exist: new to be creat ed InnoDB: Setting log file c:\iblogs\ib_logfile0 size to 31457280 InnoDB: Log file c:\iblogs\ib_logfile1 did not exist: new to be creat ed InnoDB: Setting log file c:\iblogs\ib_logfile1 size to 31457280 InnoDB: Log file c:\iblogs\ib_logfile2 did not exist: new to be creat ed InnoDB: Setting log file c:\iblogs\ib_logfile2 size to 31457280 InnoDB: Doublewrite buffer not found: creating new InnoDB: Doublewrite buffer created InnoDB: creating foreign key constraint system tables InnoDB: foreign key constraint system tables created 011024 10:58:25 InnoDB: Started When the server finishes its startup sequence, you should see something like this, which indicates that the server is ready to service client connections: mysqld: ready for connections Version: '5.1.46' socket: '' port: 3306 The server continues to write to the console any further diagnostic output it produces. You can open a new console window in which to run client programs. If you omit the --console option, the server writes diagnostic output to the error log in the data directory (C:\Program Files\MySQL\MySQL Server 5.1\data by default). The error log is the file with the .err extension. Note The accounts that are listed in the MySQL grant tables initially have no passwords. After starting the server, you should set up passwords for them using the instructions in Section 2.13, "Post-Installation Setup and Testing." 2.5.5.5. Starting MySQL from the Windows Command Line The MySQL server can be started manually from the command line. This can be done on any version of Windows. To start the mysqld server from the command line, you should start a console window (or "DOS window") and enter this command: C:\> "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld" The path to mysqld may vary depending on the install location of MySQL on your system. You can stop the MySQL server by executing this command: C:\> "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqladmin" -u root shutdown Note If the MySQL root user account has a password, you need to invoke mysqladmin with the -p option and supply the password when prompted. This command invokes the MySQL administrative utility mysqladmin to connect to the server and tell it to shut down. The command connects as the MySQL root user, which is the default administrative account in the MySQL grant system. Note that users in the MySQL grant system are wholly independent from any login users under Windows. If mysqld doesn't start, check the error log to see whether the server wrote any messages there to indicate the cause of the problem. The error log is located in the C:\Program Files\MySQL\MySQL Server 5.1\data directory. It is the file with a suffix of .err. You can also try to start the server as mysqld --console; in this case, you may get some useful information on the screen that may help solve the problem. The last option is to start mysqld with the --standalone and --debug options. In this case, mysqld writes a log file C:\mysqld.trace that should contain the reason why mysqld doesn't start. See MySQL Internals: Porting (http://forge.mysql.com/wiki/MySQL_Internals_Porting). Use mysqld --verbose --help to display all the options that mysqld supports. 2.5.5.6. Starting MySQL as a Windows Service On Windows, the recommended way to run MySQL is to install it as a Windows service, whereby MySQL starts and stops automatically when Windows starts and stops. A MySQL server installed as a service can also be controlled from the command line using NET commands, or with the graphical Services utility. Generally, to install MySQL as a Windows service you should be logged in using an account that has administrator rights. The Services utility (the Windows Service Control Manager) can be found in the Windows Control Panel (under Administrative Tools on Windows 2000, XP, Vista and Server 2003). To avoid conflicts, it is advisable to close the Services utility while performing server installation or removal operations from the command line. Before installing MySQL as a Windows service, you should first stop the current server if it is running by using the following command: C:\> "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqladmin" -u root shutdown Note If the MySQL root user account has a password, you need to invoke mysqladmin with the -p option and supply the password when prompted. This command invokes the MySQL administrative utility mysqladmin to connect to the server and tell it to shut down. The command connects as the MySQL root user, which is the default administrative account in the MySQL grant system. Note that users in the MySQL grant system are wholly independent from any login users under Windows. Install the server as a service using this command: C:\> "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld" --install The service-installation command does not start the server. Instructions for that are given later in this section. To make it easier to invoke MySQL programs, you can add the path name of the MySQL bin directory to your Windows system PATH environment variable: * On the Windows desktop, right-click on the My Computer icon, and select Properties. * Next select the Advanced tab from the System Properties menu that appears, and click the Environment Variables button. * Under System Variables, select Path, and then click the Edit button. The Edit System Variable dialogue should appear. * Place your cursor at the end of the text appearing in the space marked Variable Value. (Use the End key to ensure that your cursor is positioned at the very end of the text in this space.) Then enter the complete path name of your MySQL bin directory (for example, C:\Program Files\MySQL\MySQL Server 5.1\bin), Note that there should be a semicolon separating this path from any values present in this field. Dismiss this dialogue, and each dialogue in turn, by clicking OK until all of the dialogues that were opened have been dismissed. You should now be able to invoke any MySQL executable program by typing its name at the DOS prompt from any directory on the system, without having to supply the path. This includes the servers, the mysql client, and all MySQL command-line utilities such as mysqladmin and mysqldump. You should not add the MySQL bin directory to your Windows PATH if you are running multiple MySQL servers on the same machine. Warning You must exercise great care when editing your system PATH by hand; accidental deletion or modification of any portion of the existing PATH value can leave you with a malfunctioning or even unusable system. The following additional arguments can be used in MySQL 5.1 when installing the service: * You can specify a service name immediately following the --install option. The default service name is MySQL. * If a service name is given, it can be followed by a single option. By convention, this should be --defaults-file=file_name to specify the name of an option file from which the server should read options when it starts. The use of a single option other than --defaults-file is possible but discouraged. --defaults-file is more flexible because it enables you to specify multiple startup options for the server by placing them in the named option file. * You can also specify a --local-service option following the service name. This causes the server to run using the LocalService Windows account that has limited system privileges. This account is available only for Windows XP or newer. If both --defaults-file and --local-service are given following the service name, they can be in any order. For a MySQL server that is installed as a Windows service, the following rules determine the service name and option files that the server uses: * If the service-installation command specifies no service name or the default service name (MySQL) following the --install option, the server uses the a service name of MySQL and reads options from the [mysqld] group in the standard option files. * If the service-installation command specifies a service name other than MySQL following the --install option, the server uses that service name. It reads options from the [mysqld] group and the group that has the same name as the service in the standard option files. This allows you to use the [mysqld] group for options that should be used by all MySQL services, and an option group with the service name for use by the server installed with that service name. * If the service-installation command specifies a --defaults-file option after the service name, the server reads options only from the [mysqld] group of the named file and ignores the standard option files. As a more complex example, consider the following command: C:\> "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld" --install MySQL --defaults-file=C:\my-opts.cnf Here, the default service name (MySQL) is given after the --install option. If no --defaults-file option had been given, this command would have the effect of causing the server to read the [mysqld] group from the standard option files. However, because the --defaults-file option is present, the server reads options from the [mysqld] option group, and only from the named file. You can also specify options as Start parameters in the Windows Services utility before you start the MySQL service. Once a MySQL server has been installed as a service, Windows starts the service automatically whenever Windows starts. The service also can be started immediately from the Services utility, or by using a NET START MySQL command. The NET command is not case sensitive. When run as a service, mysqld has no access to a console window, so no messages can be seen there. If mysqld does not start, check the error log to see whether the server wrote any messages there to indicate the cause of the problem. The error log is located in the MySQL data directory (for example, C:\Program Files\MySQL\MySQL Server 5.1\data). It is the file with a suffix of .err. When a MySQL server has been installed as a service, and the service is running, Windows stops the service automatically when Windows shuts down. The server also can be stopped manually by using the Services utility, the NET STOP MySQL command, or the mysqladmin shutdown command. You also have the choice of installing the server as a manual service if you do not wish for the service to be started automatically during the boot process. To do this, use the --install-manual option rather than the --install option: C:\> "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld" --install-m anual To remove a server that is installed as a service, first stop it if it is running by executing NET STOP MySQL. Then use the --remove option to remove it: C:\> "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld" --remove If mysqld is not running as a service, you can start it from the command line. For instructions, see Section 2.5.5.5, "Starting MySQL from the Windows Command Line." Please see Section 2.5.6, "Troubleshooting a MySQL Installation Under Windows," if you encounter difficulties during installation. 2.5.5.7. Testing The MySQL Installation You can test whether the MySQL server is working by executing any of the following commands: C:\> "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqlshow" C:\> "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqlshow" -u root mysql C:\> "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqladmin" version status proc C:\> "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysql" test Note By default, mysqlshow will try to connect using the ODBC user. This user is not created by default. You should specify a valid user, or root with the right password to check the operation of the server. If mysqld is slow to respond to TCP/IP connections from client programs, there is probably a problem with your DNS. In this case, start mysqld with the --skip-name-resolve option and use only localhost and IP numbers in the Host column of the MySQL grant tables. You can force a MySQL client to use a named-pipe connection rather than TCP/IP by specifying the --pipe or --protocol=PIPE option, or by specifying . (period) as the host name. Use the --socket option to specify the name of the pipe if you do not want to use the default pipe name. Note that if you have set a password for the root account, deleted the anonymous account, or created a new user account, then you must use the appropriate -u and -p options with the commands shown above in order to connect with the MySQL Server. See Section 4.2.2, "Connecting to the MySQL Server." For more information about mysqlshow, see Section 4.5.6, "mysqlshow --- Display Database, Table, and Column Information." 2.5.6. Troubleshooting a MySQL Installation Under Windows When installing and running MySQL for the first time, you may encounter certain errors that prevent the MySQL server from starting. The purpose of this section is to help you diagnose and correct some of these errors. Your first resource when troubleshooting server issues is the error log. The MySQL server uses the error log to record information relevant to the error that prevents the server from starting. The error log is located in the data directory specified in your my.ini file. The default data directory location is C:\Program Files\MySQL\MySQL Server 5.1\data. See Section 5.2.2, "The Error Log." Another source of information regarding possible errors is the console messages displayed when the MySQL service is starting. Use the NET START MySQL command from the command line after installing mysqld as a service to see any error messages regarding the starting of the MySQL server as a service. See Section 2.5.5.6, "Starting MySQL as a Windows Service." The following examples show other common error messages you may encounter when installing MySQL and starting the server for the first time: * If the MySQL server cannot find the mysql privileges database or other critical files, you may see these messages: System error 1067 has occurred. Fatal error: Can't open privilege tables: Table 'mysql.host' doesn't exist These messages often occur when the MySQL base or data directories are installed in different locations than the default locations (C:\Program Files\MySQL\MySQL Server 5.1 and C:\Program Files\MySQL\MySQL Server 5.1\data, respectively). This situation may occur when MySQL is upgraded and installed to a new location, but the configuration file is not updated to reflect the new location. In addition, there may be old and new configuration files that conflict. Be sure to delete or rename any old configuration files when upgrading MySQL. If you have installed MySQL to a directory other than C:\Program Files\MySQL\MySQL Server 5.1, you need to ensure that the MySQL server is aware of this through the use of a configuration (my.ini) file. The my.ini file needs to be located in your Windows directory, typically C:\WINDOWS. You can determine its exact location from the value of the WINDIR environment variable by issuing the following command from the command prompt: C:\> echo %WINDIR% An option file can be created and modified with any text editor, such as Notepad. For example, if MySQL is installed in E:\mysql and the data directory is D:\MySQLdata, you can create the option file and set up a [mysqld] section to specify values for the basedir and datadir options: [mysqld] # set basedir to your installation path basedir=E:/mysql # set datadir to the location of your data directory datadir=D:/MySQLdata Note that Windows path names are specified in option files using (forward) slashes rather than backslashes. If you do use backslashes, double them: [mysqld] # set basedir to your installation path basedir=C:\\Program Files\\MySQL\\MySQL Server 5.1 # set datadir to the location of your data directory datadir=D:\\MySQLdata The rules for use of backslash in option file values are given in Section 4.2.3.3, "Using Option Files." If you change the datadir value in your MySQL configuration file, you must move the contents of the existing MySQL data directory before restarting the MySQL server. See Section 2.5.5.2, "Creating an Option File." * If you reinstall or upgrade MySQL without first stopping and removing the existing MySQL service and install MySQL using the MySQL Config Wizard, you may see this error: Error: Cannot create Windows service for MySql. Error: 0 This occurs when the Config Wizard tries to install the service and finds an existing service with the same name. One solution to this problem is to choose a service name other than mysql when using the configuration wizard. This allows the new service to be installed correctly, but leaves the outdated service in place. Although this is harmless, it is best to remove old services that are no longer in use. To permanently remove the old mysql service, execute the following command as a user with administrative privileges, on the command-line: C:\> sc delete mysql [SC] DeleteService SUCCESS If the sc utility is not available for your version of Windows, download the delsrv utility from http://www.microsoft.com/windows2000/techinfo/reskit/tools/exi sting/delsrv-o.asp and use the delsrv mysql syntax. 2.5.7. Upgrading MySQL on Windows This section lists some of the steps you should take when upgrading MySQL on Windows. 1. Review Section 2.4.1, "Upgrading MySQL," for additional information on upgrading MySQL that is not specific to Windows. 2. You should always back up your current MySQL installation before performing an upgrade. See Section 6.2, "Database Backup Methods." 3. Download the latest Windows distribution of MySQL from http://dev.mysql.com/downloads/. 4. Before upgrading MySQL, you must stop the server. If the server is installed as a service, stop the service with the following command from the command prompt: C:\> NET STOP MySQL If you are not running the MySQL server as a service, use the following command to stop it: C:\> "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqladmin" -u root shutdown Note If the MySQL root user account has a password, you need to invoke mysqladmin with the -p option and supply the password when prompted. 5. When upgrading to MySQL 5.1 from a version previous to 4.1.5, or when upgrading from a version of MySQL installed from a Zip archive to a version of MySQL installed with the MySQL Installation Wizard, you must manually remove the previous installation and MySQL service (if the server is installed as a service). To remove the MySQL service, use the following command: C:\> C:\mysql\bin\mysqld --remove If you do not remove the existing service, the MySQL Installation Wizard may fail to properly install the new MySQL service. 6. When upgrading from MySQL 5.1.23 to MySQL 5.1.24, the change in the default location of the data directory from a directory within the MySQL installation to the AppData folder means that you must manually copy the data files from your old installation to the new location. 7. If you are using the MySQL Installation Wizard, start the wizard as described in Section 2.5.3.1, "Using the MySQL Installation Wizard." 8. If you are installing MySQL from a Zip archive, extract the archive. You may either overwrite your existing MySQL installation (usually located at C:\mysql), or install it into a different directory, such as C:\mysql5. Overwriting the existing installation is recommended. 9. If you were running MySQL as a Windows service and you had to remove the service earlier in this procedure, reinstall the service. (See Section 2.5.5.6, "Starting MySQL as a Windows Service.") 10. Restart the server. For example, use NET START MySQL if you run MySQL as a service, or invoke mysqld directly otherwise. 11. If you encounter errors, see Section 2.5.6, "Troubleshooting a MySQL Installation Under Windows." 2.5.8. Windows Post-Installation Procedures On Windows, the data directory and the grant tables do not have to be created. MySQL Windows distributions include the grant tables with a set of preinitialized accounts in the mysql database under the data directory. It is unnecessary to run the mysql_install_db script that is used on Unix. Regarding passwords, if you installed MySQL using the Windows Installation Wizard, you may have already assigned passwords to the accounts. (See Section 2.5.3.1, "Using the MySQL Installation Wizard.") Otherwise, use the password-assignment procedure given in Section 2.13.2, "Securing the Initial MySQL Accounts." Before setting up passwords, you might want to try running some client programs to make sure that you can connect to the server and that it is operating properly. Make sure that the server is running (see Section 2.5.5.4, "Starting the Server for the First Time"), and then issue the following commands to verify that you can retrieve information from the server. The output should be similar to what is shown here: C:\> C:\mysql\bin\mysqlshow +--------------------+ | Databases | +--------------------+ | information_schema | | mysql | | test | +--------------------+ Note The above may not work if the correct user does not exist. If you installed using the MSI packages and used the MySQL Server Instance Config Wizard, then the root will haqve been created automatically with the password you supplied. In this case, you should use the -u and -p options where you will be prompted for the password. Note The list of installed databases may vary, but will always include the minimum of mysql and information_schema. In most cases, the test database will also be installed automatically. If you specify the name of the database, then a list of the tables within a given database will be displayed: C:\> C:\mysql\bin\mysqlshow mysql Database: mysql +---------------------------+ | Tables | +---------------------------+ | columns_priv | | db | | event | | func | | general_log | | help_category | | help_keyword | | help_relation | | help_topic | | host | | plugin | | proc | | procs_priv | | servers | | slow_log | | tables_priv | | time_zone | | time_zone_leap_second | | time_zone_name | | time_zone_transition | | time_zone_transition_type | | user | +---------------------------+ C:\> C:\mysql\bin\mysql -e "SELECT Host,Db,User FROM db" mysql +------+-------+------+ | host | db | user | +------+-------+------+ | % | test% | | +------+-------+------+ You may need to specify a different directory from the one shown; if you used the Windows Installation Wizard, then the default directory is C:\Program Files\MySQL\MySQL Server 5.1, and the mysql and mysqlshow client programs are in C:\Program Files\MySQL\MySQL Server 5.1\bin. See Section 2.5.3.1, "Using the MySQL Installation Wizard," for more information. If you have already secured the initial MySQL accounts, you may need to use the -u and -p options to supply a user name and password to the mysqlshow and mysql client programs; otherwise the programs may fail with an error, or you may not be able to view all databases. For example, if you have assigned the password "secretpass" to the MySQL root account, then you can invoke mysqlshow and mysql as shown here: C:\> C:\mysql\bin\mysqlshow -uroot -psecretpass +--------------------+ | Databases | +--------------------+ | information_schema | | mysql | | test | +--------------------+ C:\> C:\mysql\bin\mysqlshow -uroot -psecretpass mysql Database: mysql +---------------------------+ | Tables | +---------------------------+ | columns_priv | | db | | event | | func | | general_log | | help_category | | help_keyword | | help_relation | | help_topic | | host | | plugin | | proc | | procs_priv | | servers | | slow_log | | tables_priv | | time_zone | | time_zone_leap_second | | time_zone_name | | time_zone_transition | | time_zone_transition_type | | user | +---------------------------+ C:\> C:\mysql\bin\mysql -uroot -psecretpass -e "SELECT Host,Db,User F ROM db" mysql +------+-------+------+ | host | db | user | +------+-------+------+ | % | test% | | +------+-------+------+ For more information about these programs, see Section 4.5.6, "mysqlshow --- Display Database, Table, and Column Information," and Section 4.5.1, "mysql --- The MySQL Command-Line Tool." If you are running a version of Windows that supports services and you want the MySQL server to run automatically when Windows starts, see Section 2.5.5.6, "Starting MySQL as a Windows Service." 2.5.9. MySQL on Windows Compared to MySQL on Unix MySQL for Windows has proven itself to be very stable. The Windows version of MySQL has the same features as the corresponding Unix version, with the following exceptions: * Limited number of ports Windows systems have about 4,000 ports available for client connections, and after a connection on a port closes, it takes two to four minutes before the port can be reused. In situations where clients connect to and disconnect from the server at a high rate, it is possible for all available ports to be used up before closed ports become available again. If this happens, the MySQL server appears to be unresponsive even though it is running. Note that ports may be used by other applications running on the machine as well, in which case the number of ports available to MySQL is lower. For more information about this problem, see http://support.microsoft.com/default.aspx?scid=kb;en-us;196271 . * Concurrent reads MySQL depends on the pread() and pwrite() system calls to be able to mix INSERT and SELECT. Currently, we use mutexes to emulate pread() and pwrite(). We intend to replace the file level interface with a virtual interface in the future so that we can use the readfile()/writefile() interface to get more speed. The current implementation limits the number of open files that MySQL 5.1 can use to 2,048, which means that you cannot run as many concurrent threads on Windows as on Unix. * Blocking read MySQL uses a blocking read for each connection. That has the following implications if named-pipe connections are enabled: + A connection is not disconnected automatically after eight hours, as happens with the Unix version of MySQL. + If a connection hangs, it is not possible to break it without killing MySQL. + mysqladmin kill does not work on a sleeping connection. + mysqladmin shutdown cannot abort as long as there are sleeping connections. We plan to fix this problem in the future. * ALTER TABLE While you are executing an ALTER TABLE statement, the table is locked from being used by other threads. This has to do with the fact that on Windows, you can't delete a file that is in use by another thread. In the future, we may find some way to work around this problem. * DATA DIRECTORY and INDEX DIRECTORY The DATA DIRECTORY and INDEX DIRECTORY options for CREATE TABLE are ignored on Windows, because Windows doesn't support symbolic links. These options also are ignored on systems that have a nonfunctional realpath() call. * DROP DATABASE You cannot drop a database that is in use by another thread. * Case-insensitive names File names are not case sensitive on Windows, so MySQL database and table names are also not case sensitive on Windows. The only restriction is that database and table names must be specified using the same case throughout a given statement. See Section 8.2.2, "Identifier Case Sensitivity." * Directory and file names On Windows, MySQL Server supports only directory and file names that are compatible with the current ANSI code pages. For example, the following Japanese directory name will not work in the Western locale (code page 1252): datadir="C:/私たちのプロジェクトのデータ" The same limitation applies to directory and file names referred to in SQL statements, such as the data file path name in LOAD DATA INFILE. * The "\" path name separator character Path name components in Windows are separated by the "\" character, which is also the escape character in MySQL. If you are using LOAD DATA INFILE or SELECT ... INTO OUTFILE, use Unix-style file names with "/" characters: mysql> LOAD DATA INFILE 'C:/tmp/skr.txt' INTO TABLE skr; mysql> SELECT * INTO OUTFILE 'C:/tmp/skr.txt' FROM skr; Alternatively, you must double the "\" character: mysql> LOAD DATA INFILE 'C:\\tmp\\skr.txt' INTO TABLE skr; mysql> SELECT * INTO OUTFILE 'C:\\tmp\\skr.txt' FROM skr; * Problems with pipes Pipes do not work reliably from the Windows command-line prompt. If the pipe includes the character ^Z / CHAR(24), Windows thinks that it has encountered end-of-file and aborts the program. This is mainly a problem when you try to apply a binary log as follows: C:\> mysqlbinlog binary_log_file | mysql --user=root If you have a problem applying the log and suspect that it is because of a ^Z / CHAR(24) character, you can use the following workaround: C:\> mysqlbinlog binary_log_file --result-file=/tmp/bin.sql C:\> mysql --user=root --execute "source /tmp/bin.sql" The latter command also can be used to reliably read in any SQL file that may contain binary data. * Access denied for user error If MySQL cannot resolve your host name properly, you may get the following error when you attempt to run a MySQL client program to connect to a server running on the same machine: Access denied for user 'some_user'@'unknown' to database 'mysql' To fix this problem, you should create a file named \windows\hosts containing the following information: 127.0.0.1 localhost Here are some open issues for anyone who might want to help us improve MySQL on Windows: * Add macros to use the faster thread-safe increment/decrement methods provided by Windows. 2.5.10. Installing MySQL from Source on Windows These instructions describe how to build binaries from source for MySQL 5.1 on Windows. Instructions are provided for building binaries from a standard source distribution or from the Bazaar tree that contains the latest development source. Note The instructions here are strictly for users who want to test MySQL on Microsoft Windows from the latest source distribution or from the Bazaar tree. For production use, we do not advise using a MySQL server built by yourself from source. Normally, it is best to use precompiled binary distributions of MySQL that are built specifically for optimal performance on Windows by Oracle Corporation. Instructions for installing binary distributions are available in Section 2.5, "Installing MySQL on Windows." To build MySQL on Windows from source, you must satisfy the following system, compiler, and resource requirements: * Windows 2000, Windows XP, or newer version. Windows Vista is supported when using Visual Studio 2005 provided you have installed the following updates: + Microsoft Visual Studio 2005 Professional Edition - ENU Service Pack 1 (KB926601) (http://support.microsoft.com/?kbid=926601) + Security Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB937061) (http://support.microsoft.com/?kbid=937061) + Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB932232) (http://support.microsoft.com/?kbid=932232) * CMake, which can be downloaded from http://www.cmake.org. After installing, modify your path to include the cmake binary. * Microsoft Visual C++ 2005 Express Edition, Visual Studio .Net 2003 (7.1), or Visual Studio 2005 (8.0) compiler system. * If you are using Visual C++ 2005 Express Edition, you must also install an appropriate Platform SDK. More information and links to downloads for various Windows platforms is available from http://www.microsoft.com/downloads/details.aspx?familyid=0baf2 b35-c656-4969-ace8-e4c0c0716adb. * If you are compiling from a Bazaar tree or making changes to the parser, you need bison for Windows, which can be downloaded from http://gnuwin32.sourceforge.net/packages/bison.htm. Download the package labeled "Complete package, excluding sources". After installing the package, modify your path to include the bison binary and ensure that this binary is accessible from Visual Studio. * Cygwin might be necessary if you want to run the test script or package the compiled binaries and support files into a Zip archive. (Cygwin is needed only to test or package the distribution, not to build it.) Cygwin is available from http://cygwin.com. * 3GB to 5GB of disk space. The exact system requirements for Visual Studio can be found here: http://msdn.microsoft.com/vstudio/Previous/2003/sysreqs/default.as px and http://msdn.microsoft.com/vstudio/products/sysreqs/default.aspx You also need a MySQL source distribution for Windows, which can be obtained two ways: * Obtain a source distribution packaged by Oracle Corporation. These are available from http://dev.mysql.com/downloads/. * Package a source distribution yourself from the latest Bazaar developer source tree. For instructions on pulling the latest source files, see Section 2.3.3, "Installing from the Development Source Tree." If you find something not working as expected, or you have suggestions about ways to improve the current build process on Windows, please send a message to the win32 mailing list. See Section 1.6.1, "MySQL Mailing Lists." 2.5.10.1. Building MySQL from Source Using CMake and Visual Studio You can build MySQL on Windows by using a combination of cmake and Microsoft Visual Studio .NET 2003 (7.1), Microsoft Visual Studio 2005 (8.0), Microsoft Visual Studio 2008 (9.0) or Microsoft Visual C++ 2005 Express Edition. You must have the appropriate Microsoft Platform SDK installed. Note To compile from the source code on Windows you must use the standard source distribution (for example, mysql-5.1.46.tar.gz). You build from the same distribution as used to build MySQL on Unix, Linux and other platforms. Do not use the Windows Source distributions as they do not contain the necessary configuration script and other files. Follow this procedure to build MySQL: 1. If you are installing from a packaged source distribution, create a work directory (for example, C:\workdir), and unpack the source distribution there using WinZip or another Windows tool that can read .zip files. This directory is the work directory in the following instructions. Note You must run the commands in the win directory from the top-level source directory. Do not change into the win directory, as the commands will not be executed correctly. 2. Start a command shell. If you have not configured the PATH and other environment variables for all command shells, you may be able to start a command shell from the Start Menu within the Windows Visual Studio menu that contains the necessary environment changes. 3. Within the command shell, navigate to the work directory and run the following command: C:\workdir>win\configure.js options If you have associated the .js file extension with an application such as a text editor, then you may need to use the following command to force configure.js to be executed as a script: C:\workdir>cscript win\configure.js options These options are available for configure.js: + WITH_INNOBASE_STORAGE_ENGINE: Enable the InnoDB storage engine. + WITH_PARTITION_STORAGE_ENGINE: Enable user-defined partitioning. + WITH_ARCHIVE_STORAGE_ENGINE: Enable the ARCHIVE storage engine. + WITH_BLACKHOLE_STORAGE_ENGINE: Enable the BLACKHOLE storage engine. + WITH_EXAMPLE_STORAGE_ENGINE: Enable the EXAMPLE storage engine. + WITH_FEDERATED_STORAGE_ENGINE: Enable the FEDERATED storage engine. + WITH_NDBCLUSTER_STORAGE_ENGINE (experimental): Enable the NDBCLUSTER storage engine in the MySQL server; cause binaries for the MySQL Cluster management and data node, management client, and other programs to be built. This option is supported only in MySQL Cluster NDB 7.0 (NDBCLUSTER storage engine versions 6.4.0 and later) using the MySQL Cluster sources. It cannot be used to enable clustering support in other MySQL source trees or distributions. + MYSQL_SERVER_SUFFIX=suffix: Server suffix, default none. + COMPILATION_COMMENT=comment: Server comment, default "Source distribution". + MYSQL_TCP_PORT=port: Server port, default 3306. + DISABLE_GRANT_OPTIONS: Disables the --bootstrap, --skip-grant-tables, and --init-file options for mysqld. This option is available as of MySQL 5.1.15. For example (type the command on one line): C:\workdir>win\configure.js WITH_INNOBASE_STORAGE_ENGINE WITH_PARTITION_STORAGE_ENGINE MYSQL_SERVER_SUFFIX=-pro 4. From the work directory, execute the win\build-vs9.bat (Windows Visual Studio 2008), win\build-vs8.bat (Windows Visual Studio 2005), or win\build-vs71.bat (Windows Visual Stidion 2003) script, depending on the version of Visual Studio you have installed. The script invokes CMake, which generates the mysql.sln solution file. You can also use the corresponding 64-bit file (for example win\build-vs8_x64.bat or win\build-vs9_x64.bat) to build the 64-bit version of MySQL. However, you cannot build the 64-bit version with Visual Studio Express Edition. You must use Visual Studio 2005 (8.0) or higher. 5. From the work directory, open the generated mysql.sln file with Visual Studio and select the proper configuration using the Configuration menu. The menu provides Debug, Release, RelwithDebInfo, MinRelInfo options. Then select Solution > Build to build the solution. Remember the configuration that you use in this step. It is important later when you run the test script because that script needs to know which configuration you used. 6. Test the server. The server built using the preceding instructions expects that the MySQL base directory and data directory are C:\mysql and C:\mysql\data by default. If you want to test your server using the source tree root directory and its data directory as the base directory and data directory, you need to tell the server their path names. You can either do this on the command line with the --basedir and --datadir options, or by placing appropriate options in an option file. (See Section 4.2.3.3, "Using Option Files.") If you have an existing data directory elsewhere that you want to use, you can specify its path name instead. When the server is running in standalone fashion or as a service based on your configuration, try to connect to it from the mysql interactive command-line utility. You can also run the standard test script, mysql-test-run.pl. This script is written in Perl, so you'll need either Cygwin or ActiveState Perl to run it. You may also need to install the modules required by the script. To run the test script, change location into the mysql-test directory under the work directory, set the MTR_VS_CONFIG environment variable to the configuration you selected earlier (or use the --vs-config option), and invoke mysql-test-run.pl. For example (using Cygwin and the bash shell): shell> cd mysql-test shell> export MTR_VS_CONFIG=debug shell> ./mysql-test-run.pl --force --timer shell> ./mysql-test-run.pl --force --timer --ps-protocol When you are satisfied that the programs you have built are working correctly, stop the server. Now you can install the distribution. One way to do this is to use the make_win_bin_dist script in the scripts directory of the MySQL source distribution (see Section 4.4.2, "make_win_bin_dist --- Package MySQL Distribution as ZIP Archive"). This is a shell script, so you must have Cygwin installed if you want to use it. It creates a Zip archive of the built executables and support files that you can unpack in the location at which you want to install MySQL. It is also possible to install MySQL by copying directories and files directly: 1. Create the directories where you want to install MySQL. For example, to install into C:\mysql, use these commands: C:\> mkdir C:\mysql C:\> mkdir C:\mysql\bin C:\> mkdir C:\mysql\data C:\> mkdir C:\mysql\share C:\> mkdir C:\mysql\scripts If you want to compile other clients and link them to MySQL, you should also create several additional directories: C:\> mkdir C:\mysql\include C:\> mkdir C:\mysql\lib C:\> mkdir C:\mysql\lib\debug C:\> mkdir C:\mysql\lib\opt If you want to benchmark MySQL, create this directory: C:\> mkdir C:\mysql\sql-bench Benchmarking requires Perl support. See Section 2.15, "Perl Installation Notes." 2. From the work directory, copy into the C:\mysql directory the following files and directories: C:\> cd \workdir C:\workdir> mkdir C:\mysql C:\workdir> mkdir C:\mysql\bin C:\workdir> copy client\Release\*.exe C:\mysql\bin C:\workdir> copy sql\Release\mysqld.exe C:\mysql\bin\mysqld.exe C:\workdir> xcopy scripts\*.* C:\mysql\scripts /E C:\workdir> xcopy share\*.* C:\mysql\share /E If you want to compile other clients and link them to MySQL, you should also copy several libraries and header files: C:\workdir> copy lib\Release\mysqlclient.lib C:\mysql\lib\debug C:\workdir> copy lib\Release\libmysql.* C:\mysql\lib\debug C:\workdir> copy lib\Release\zlib.* C:\mysql\lib\debug C:\workdir> copy lib\Release\mysqlclient.lib C:\mysql\lib\opt C:\workdir> copy lib\Release\libmysql.* C:\mysql\lib\opt C:\workdir> copy lib\Release\zlib.* C:\mysql\lib\opt C:\workdir> copy include\*.h C:\mysql\include C:\workdir> copy libmysql\libmysql.def C:\mysql\include Note If you have compiled a Debug, rather than Release solution, you can replace Release with Debug in the source file names shown above. If you want to benchmark MySQL, you should also do this: C:\workdir> xcopy sql-bench\*.* C:\mysql\bench /E After installation, set up and start the server in the same way as for binary Windows distributions. This includes creating the system tables by running mysql_install_db. For more information, see Section 2.5, "Installing MySQL on Windows." 2.5.11. Compiling MySQL Clients on Windows In your source files, you should include my_global.h before mysql.h: #include #include my_global.h includes any other files needed for Windows compatibility (such as windows.h) if you compile your program on Windows. You can either link your code with the dynamic libmysql.lib library, which is just a wrapper to load in libmysql.dll on demand, or link with the static mysqlclient.lib library. The MySQL client libraries are compiled as threaded libraries, so you should also compile your code to be multi-threaded. 2.6. Installing MySQL on Linux The following sections covers the installation of Linux using RPMs. For information on using a generic binary package using tar, see Section 2.2, "Installing MySQL from Generic Binaries on Unix/Linux." For information on installing from source, see Section 2.3, "MySQL Installation Using a Source Distribution." mysql.server can be found in the support-files directory under the MySQL installation directory or in a MySQL source tree. You can install it as /etc/init.d/mysql for automatic MySQL startup and shutdown. See Section 2.13.1.2, "Starting and Stopping MySQL Automatically." 2.6.1. Installing MySQL from RPM Packages on Linux The recommended way to install MySQL on RPM-based Linux distributions is by using the RPM packages. The RPMs that we provide to the community should work on all versions of Linux that support RPM packages and use glibc 2.3. To obtain RPM packages, see Section 2.1.3, "How to Get MySQL." For non-RPM Linux distributions, you can install MySQL using a .tar.gz package. See Section 2.2, "Installing MySQL from Generic Binaries on Unix/Linux." We do provide some platform-specific RPMs; the difference between a platform-specific RPM and a generic RPM is that a platform-specific RPM is built on the targeted platform and is linked dynamically whereas a generic RPM is linked statically with LinuxThreads. Note RPM distributions of MySQL often are provided by other vendors. Be aware that they may differ in features and capabilities from those built by us, and that the instructions in this manual do not necessarily apply to installing them. The vendor's instructions should be consulted instead. In most cases, you need to install only the MySQL-server and MySQL-client packages to get a functional MySQL installation. The other packages are not required for a standard installation. RPMs for MySQL Cluster. Beginning with MySQL 5.1.24, standard MySQL server RPMs built by MySQL no longer provide support for the NDBCLUSTER storage engine. MySQL Cluster users wanting to upgrade MySQL 5.1.23 or earlier installations from RPMs built by MySQL should upgrade to MySQL Cluster NDB 6.2 or MySQL Cluster NDB 6.3; RPMs that should work with most Linux distributions are available for both of these release series. Important When upgrading a MySQL Cluster RPM installation, you must upgrade all installed RPMs, including the Server and Client RPMs. For more information about installing MySQL Cluster from RPMs, see Section 17.2.1, "MySQL Cluster Multi-Computer Installation." For upgrades, if your installation was originally produced by installing multiple RPM packages, it is best to upgrade all the packages, not just some. For example, if you previously installed the server and client RPMs, do not upgrade just the server RPM. The RPM packages shown in the following list are available. The names shown here use a suffix of .glibc23.i386.rpm, but particular packages can have different suffixes, described later. * MySQL-server-VERSION.glibc23.i386.rpm The MySQL server. You need this unless you only want to connect to a MySQL server running on another machine. * MySQL-client-VERSION.glibc23.i386.rpm The standard MySQL client programs. You probably always want to install this package. * MySQL-devel-VERSION.glibc23.i386.rpm The libraries and include files that are needed if you want to compile other MySQL clients, such as the Perl modules. * MySQL-debuginfo-VERSION.glibc23.i386.rpm This package contains debugging information. debuginfo RPMs are never needed to use MySQL software; this is true both for the server and for client programs. However, they contain additional information that might be needed by a debugger to analyze a crash. * MySQL-shared-VERSION.glibc23.i386.rpm This package contains the shared libraries (libmysqlclient.so*) that certain languages and applications need to dynamically load and use MySQL. It contains single-threaded and thread-safe libraries. If you install this package, do not install the MySQL-shared-compat package. * MySQL-shared-compat-VERSION.glibc23.i386.rpm This package includes the shared libraries for MySQL 3.23, 4.0, and so on, up to the current release. It contains single-threaded and thread-safe libraries. Install this package instead of MySQL-shared if you have applications installed that are dynamically linked against older versions of MySQL but you want to upgrade to the current version without breaking the library dependencies. * MySQL-shared-compat-advanced-gpl-VERSION.glibc23.i386.rpm, MySQL-shared-compat-advanced-VERSION.glibc23.i386.rpm These are like the MySQL-shared-compat package, but are for the "MySQL Enterprise Server - Advanced Edition" products. Install these packages rather than the normal MySQL-shared-compat package if you want to included shared client libraries for older MySQL versions. * MySQL-embedded-VERSION.glibc23.i386.rpm The embedded MySQL server library. * MySQL-ndb-management-VERSION.glibc23.i386.rpm, MySQL-ndb-storage-VERSION.glibc23.i386.rpm, MySQL-ndb-tools-VERSION.glibc23.i386.rpm, MySQL-ndb-extra-VERSION.glibc23.i386.rpm Packages that contain additional files for MySQL Cluster installations. Note The MySQL-ndb-tools RPM requires a working installation of perl. Prior to MySQL 5.1.18, the DBI and HTML::Template packages were also required. See Section 2.15, "Perl Installation Notes," and Section 17.4.21, "ndb_size.pl --- NDBCLUSTER Size Requirement Estimator," for more information. * MySQL-test-VERSION.glibc23.i386.rpm This package includes the MySQL test suite. * MySQL-VERSION.src.rpm This contains the source code for all of the previous packages. It can also be used to rebuild the RPMs on other architectures (for example, Alpha or SPARC). The suffix of RPM package names (following the VERSION value) has the following syntax: .PLATFORM.CPU.rpm The PLATFORM and CPU values indicate the type of system for which the package is built. PLATFORM indicates the platform and CPU indicates the processor type or family. All packages are dynamically linked against glibc 2.3. The PLATFORM value indicates whether the package is platform independent or intended for a specific platform, as shown in the following table. glibc23 Platform independent, should run on any Linux distribution that supports glibc 2.3 rhel3, rhel4 Red Hat Enterprise Linux 3 or 4 sles9, sles10 SuSE Linux Enterprise Server 9 or 10 In MySQL 5.1, only glibc23 packages are available currently. The CPU value indicates the processor type or family for which the package is built. i386 x86 processor, 386 and up i586 x86 processor, Pentium and up x86_64 64-bit x86 processor ia64 Itanium (IA-64) processor To see all files in an RPM package (for example, a MySQL-server RPM), run a command like this: shell> rpm -qpl MySQL-server-VERSION.glibc23.i386.rpm To perform a standard minimal installation, install the server and client RPMs: shell> rpm -i MySQL-server-VERSION.glibc23.i386.rpm shell> rpm -i MySQL-client-VERSION.glibc23.i386.rpm To install only the client programs, install just the client RPM: shell> rpm -i MySQL-client-VERSION.glibc23.i386.rpm RPM provides a feature to verify the integrity and authenticity of packages before installing them. If you would like to learn more about this feature, see Section 2.1.4, "Verifying Package Integrity Using MD5 Checksums or GnuPG." The server RPM places data under the /var/lib/mysql directory. The RPM also creates a login account for a user named mysql (if one does not exist) to use for running the MySQL server, and creates the appropriate entries in /etc/init.d/ to start the server automatically at boot time. (This means that if you have performed a previous installation and have made changes to its startup script, you may want to make a copy of the script so that you don't lose it when you install a newer RPM.) See Section 2.13.1.2, "Starting and Stopping MySQL Automatically," for more information on how MySQL can be started automatically on system startup. If you want to install the MySQL RPM on older Linux distributions that do not support initialization scripts in /etc/init.d (directly or via a symlink), you should create a symbolic link that points to the location where your initialization scripts actually are installed. For example, if that location is /etc/rc.d/init.d, use these commands before installing the RPM to create /etc/init.d as a symbolic link that points there: shell> cd /etc shell> ln -s rc.d/init.d . However, all current major Linux distributions should support the new directory layout that uses /etc/init.d, because it is required for LSB (Linux Standard Base) compliance. If the RPM files that you install include MySQL-server, the mysqld server should be up and running after installation. You should be able to start using MySQL. If something goes wrong, you can find more information in the binary installation section. See Section 2.2, "Installing MySQL from Generic Binaries on Unix/Linux." Note The accounts that are listed in the MySQL grant tables initially have no passwords. After starting the server, you should set up passwords for them using the instructions in Section 2.13, "Post-Installation Setup and Testing." During RPM installation, a user named mysql and a group named mysql are created on the system. This is done using the useradd, groupadd, and usermod commands. Those commands require appropriate administrative privileges, which is ensured for locally managed users and groups (as listed in the /etc/passwd and /etc/group files) by the RPM installation process being run by root. For nonlocal user management (LDAP, NIS, and so forth), the administrative tools may require additional authentication (such as a password), and will fail if the installing user does not provide this authentication. Even if they fail, the RPM installation will not abort but succeed, and this is intentional. If they failed, some of the intended transfer of ownership may be missing, and it is recommended that the system administrator then manually ensures some appropriate user andgroup exists and manually transfers ownership following the actions in the RPM spec file. 2.7. Installing MySQL on Mac OS X MySQL for Mac OS X is available in a number of different forms: * Native Package Installer format, which uses the native Mac OS X installer to walk you through the installation of MySQL. For more information, see Section 2.7.1, "Installing MySQL Using the Installation Package." You can use the package installer with Mac OS X 10.3 and later, and available for both PowerPC and Intel architectures, and both 32-bit and 64-bit architectures. There is no Universal Binary available using the package installation method. The user you use to perform the installation must have administrator privileges. * Tar package format, which uses a file packaged using the Unix tar and gzip commands. To use this method, you will need to open a Terminal window. You do not need administrator privileges using this method, as you can install the MySQL server anywhere using this method. For more information on using this method, you can use the generic instructions for using a tarball, Section 2.2, "Installing MySQL from Generic Binaries on Unix/Linux."You can use the package installer with Mac OS X 10.3 and later, and available for both PowerPC and Intel architectures, and both 32-bit and 64-bit architectures. A Universal Binary, incorporating both Power PC and Intel architectures and 32-bit and 64-bit binaries is available. In addition to the core installation, the Package Installer also includes Section 2.7.2, "Installing the MySQL Startup Item" and Section 2.7.3, "Installing and Using the MySQL Preference Pane," both of which simplify the management of your installation. * Mac OS X server includes a version of MySQL as standard. If you want to use a more recent version than that supplied with the Mac OS X server release, you can make use of the package or tar formats. For more information on using the MySQL bundled with Mac OS X, see Section 2.7.4, "Using MySQL on Mac OS X Server." For additional information on using MySQL on Mac OS X, see Section 2.7.5, "MySQL Installation on Mac OS X Notes." 2.7.1. Installing MySQL Using the Installation Package You can install MySQL on Mac OS X 10.3.x ("Panther") or newer using a Mac OS X binary package in PKG format instead of the binary tarball distribution. Please note that older versions of Mac OS X (for example, 10.1.x or 10.2.x) are not supported by this package. The package is located inside a disk image (.dmg) file that you first need to mount by double-clicking its icon in the Finder. It should then mount the image and display its contents. Note Before proceeding with the installation, be sure to shut down all running MySQL server instances by either using the MySQL Manager Application (on Mac OS X Server) or via mysqladmin shutdown on the command line. When installing from the package version, you should also install the MySQL Preference Pane, which will allow you to control the startup and execution of your MySQL server from System Preferences. For more information, see Section 2.7.3, "Installing and Using the MySQL Preference Pane." When installing using the package installer, the files are installed into a directory within /usr/local matching the name of the installation version and platform. For example, the installer file mysql-5.1.39-osx10.5-x86_64.pkg installs MySQL into /usr/local/mysql-5.1.39-osx10.5-x86_64 . The installation layout of the directory is as shown in the following table: Directory Contents of Directory bin Client programs and the mysqld server data Log files, databases docs Manual in Info format include Include (header) files lib Libraries man Unix manual pages mysql-test MySQL test suite scripts Contains the mysql_install_db script share/mysql Error message files sql-bench Benchmarks support-files Scripts and sample configuration files /tmp/mysql.sock The location of the MySQL Unix socket During the package installer process, a symbolic link from /usr/local/mysql to the version/platform specific directory created during installation will be created automatically. 1. Download and open the MySQL package installer, which is provided on a disk image (.dmg). Double-click to open the disk image, which includes the main MySQL installation package, the MySQLStartupItem.pkg installation package, and the MySQL.prefPane. 2. Double-click on the MySQL installer package. It will be named according to the version of MySQL you have downloaded. For example, if you have downloaded MySQL 5.1.39, double-click mysql-5.1.39-osx10.5-x86.pkg. 3. You will be presented with the openin installer dialog. Click Continue to begihn installation. MySQL Package Installer: Step 1 4. A copy of the installation instructions and other important information relevant to this installation are display. Click Continue . 5. If you have downloaded the community version of MySQL, you will be shown a copy of the relevent GNU General Public License. Click Continue . 6. Select the drive you want to use to install the MySQL Startup Item. The drive must have a valid, bootable, Mac OS X operating system installed. Click Continue. MySQL Package Installer: Step 4 7. You will be asked to confirm the details of the installation, including the space required for the installation. To change the drive on which the startup item is installed you can click either Go Back or Change Install Location.... To install the startup item, click Install. 8. Once the installation has been completed successfully, you will be given an Install Succeeded message. Once you have completed the basic installation, you must complete the post-installation steps as specifed in Section 2.13, "Post-Installation Setup and Testing." For convenience, you may also want to install the Section 2.7.2, "Installing the MySQL Startup Item" and Section 2.7.3, "Installing and Using the MySQL Preference Pane." 2.7.2. Installing the MySQL Startup Item The MySQL Installation Package includes a startup item that can be used to automatically startup and shutdown MySQL during boot. To install the MySQL Startup Item: 1. Download and open the MySQL package installer, which is provided on a disk image (.dmg). Double-click to open the disk image, which includes the main MySQL installation package, the MySQLStartupItem.pkg installation package, and the MySQL.prefPane. 2. Double-click on the MySQLStartItem.pkg file to start the installation process. 3. You will be presented with the Install MySQL Startup Item dialog. MySQL Startup Item Installer: Step 1 Click Continue to continue the installation process. 4. A copy of the installation instructions and other important information relevant to this installation are display. Click Continue . 5. Select the drive you want to use to install the MySQL Startup Item. The drive must have a valid, bootable, Mac OS X operating system installed. Click Continue. MySQL Startup Item Installer: Step 3 6. You will be asked to confirm the details of the installation. To change the drive on which the startup item is installed you can click either Go Back or Change Install Location.... To install the startup item, click Install. 7. Once the installation has been completed successfully, you will be given an Install Succeeded message. MySQL Startup Item Installer: Step 5 The Startup Item for MySQL is installed into /Library/StartupItems/MySQLCOM. The Startup Item installation adds a variable MYSQLCOM=-YES- to the system configuration file /etc/hostconfig. If you want to disable the automatic startup of MySQL, simply change this variable to MYSQLCOM=-NO-. After the installation, you can start up MySQL by running the following commands in a terminal window. You must have administrator privileges to perform this task. If you have installed the Startup Item, use this command to start the server: shell> sudo /Library/StartupItems/MySQLCOM/MySQLCOM start You may be prompted for your password to complete the startup. If you have installed the Startup Item, use this command to stop the server: shell> sudo /Library/StartupItems/MySQLCOM/MySQLCOM stop You may be prompted for your password to complete the shutdown. 2.7.3. Installing and Using the MySQL Preference Pane The MySQL Package installer disk image also includes a custom MySQL Preference Pane that enables you to start, stop and control automated startup during boot of your MySQL installation. To install the MySQL Preference Pane: 1. Download and open the MySQL package installer package, which is provided on a disk image (.dmg). Double-click to open the disk image, which includes the main MySQL installation package, the MySQLStartupItem.pkg installation package, and the MySQL.prefPane. 2. Double click on MySQL.prefPane. The MySQL System Preferences will open. 3. If this is the first time you have installed the preference pane, you will be asked to confirm installation and whether you want to install the preference pane for all users, or only the current user. To install the preference pane for all users you will need administrator privileges. If necessary, you will be prompted for the username and password for a user with administrator privileges. 4. If you already have the MySQL Preference Pane installed, you will be asked to confirm whether you want to overwrite the existing MySQL Preference Pane. Note The MySQL Preference Pane only starts and stops MySQL installation installed from the MySQL package installation that have been installed in the default location. Once the MySQL Preference Pane has been installed, you can control your MySQL server instance using the preference pane. To use the preference pane, open the System Preferences... from the Apple menu. Select the MySQL preference pane by clicking on the MySQL logo within the Other section of the preference panes list. MySQL Preference Pane The MySQL Preference Pane shows the current status of the MySQL server, showing stopped (in red) if the server is not running and running (in green) if the server has already been started. The preference pane will also show the current setting for whether the MySQL server has been set to start up automatically. * To start MySQL using the preference pane: Click Start MySQL Server. You may be prompted for the username and password of a user with administrator privileges to start the MySQL server. * To stop MySQL using the preference pane: Click Stop MySQL Server. You may be prompted for the username and password of a user with administrator privileges to shutdown the MySQL server. * To automatically start the MySQL server when the system boots: Check the checkbox next to Automatically Start MySQL Server on Startup. * To disable the automatic starting of the MySQL server when the system boots: Uncheck the checkbox next to Automatically Start MySQL Server on Startup. You can close the System Preferences... once you have completed your settings. 2.7.4. Using MySQL on Mac OS X Server If you are running Mac OS X Server, a version of MySQL should already be installed. The following table shows the versions of MySQL that ship with Mac OS X Server versions. Mac OS X Server Version MySQL Version 10.2-10.2.2 3.23.51 10.2.3-10.2.6 3.23.53 10.3 4.0.14 10.3.2 4.0.16 10.4.0 4.1.10a 10.5.0 5.0.45 10.6.0 5.0.82 The installation layout of MySQL on Mac OS X Server is as shown in the table below: Directory Contents of Directory /usr/bin Client programs /var/mysql Log files, databases /usr/libexec The mysqld server /usr/share/man Unix manual pages /usr/share/mysql/mysql-test MySQL test suite /usr/share/mysql Contains the mysql_install_db script /var/mysql/mysql.sock The location of the MySQL Unix socket Note The MySQL server bundled with Mac OS X Server does not include the MySQL client libraries and header files required if you want to access and use MySQL from a third-party driver, such as Perl DBI or PHP. For more information on obtaining and installing MySQL libraries, see Mac OS X Server version 10.5: MySQL libraries available for download (http://support.apple.com/kb/TA25017). Alternatively, you can ignore the bundled MySQL server and install MySQL from the package or tarball installation. For more information on managing the bundled MySQL instance in Mac OS X Server 10.5, see Mac OS X Server: Web Technologies Administration For Version 10.5 Leopard (http://images.apple.com/server/macosx/docs/Web_Technologies_Admin _v10.5.pdf). For more information on managing the bundled MySQL instance in Mac OS X Server 10.6, see Mac OS X Server: Web Technologies Administration Version 10.6 Snow Leopard (http://manuals.info.apple.com/en_US/WebTech_v10.6.pdf). 2.7.5. MySQL Installation on Mac OS X Notes You should keep the following issues and notes in mind: * The default location for the MySQL Unix socket is different on Mac OS X and Mac OS X Server depending on the installation type you chose. The default locations by installation are as follows: Package Installer from MySQL /tmp/mysql.sock Tarball from MySQL /tmp/mysql.sock MySQL Bundled with Mac OS X Server /var/mysql/mysql.sock To prevent issues, you should either change the configuration of the socket used within your application (for example, changing php.ini), or you should configure the socket location using a MySQL configuration file and the socket option. For more information, see Section 5.1.2, "Server Command Options." * You may need (or want) to create a specific mysql user to own the MySQL directory and data. On Mac OS X 10.4 and lower you can do this by using the Netinfo Manager application, located within the Utilities folder within the Applications folder. On Mac OS X 10.5 and later you can do this through the Directory Utility. From Mac OS X 10.5 and later (including Mac OS X Server 10.5) the mysql should already exist. For use in single user mode, an entry for _mysql (note the underscore prefix) should already exist within the system /etc/passwd file. * Due to a bug in the Mac OS X package installer, you may see this error message in the destination disk selection dialog: You cannot install this software on this disk. (null) If this error occurs, simply click the Go Back button once to return to the previous screen. Then click Continue to advance to the destination disk selection again, and you should be able to choose the destination disk correctly. We have reported this bug to Apple and it is investigating this problem. * Because the MySQL package installer installs the MySQL contents into a version and platform specific directory, you can use this to upgrade and migrate your database between versions. You will need to either copy the data directory from the old version to the new version, or alternatively specify an alternative datadir value to set location of the data directory. * You might want to add aliases to your shell's resource file to make it easier to access commonly used programs such as mysql and mysqladmin from the command line. The syntax for bash is: alias mysql=/usr/local/mysql/bin/mysql alias mysqladmin=/usr/local/mysql/bin/mysqladmin For tcsh, use: alias mysql /usr/local/mysql/bin/mysql alias mysqladmin /usr/local/mysql/bin/mysqladmin Even better, add /usr/local/mysql/bin to your PATH environment variable. You can do this by modifying the appropriate startup file for your shell. For more information, see Section 4.2.1, "Invoking MySQL Programs." * After you have copied over the MySQL database files from the previous installation and have successfully started the new server, you should consider removing the old installation files to save disk space. Additionally, you should also remove older versions of the Package Receipt directories located in /Library/Receipts/mysql-VERSION.pkg. 2.8. Installing MySQL on Solaris To obtain a binary MySQL distribution for Solaris in tarball or PKG format, http://dev.mysql.com/downloads/mysql/5.1.html. If you install MySQL using a binary tarball distribution on Solaris, you may run into trouble even before you get the MySQL distribution unpacked, as the Solaris tar cannot handle long file names. This means that you may see errors when you try to unpack MySQL. If this occurs, you must use GNU tar (gtar) to unpack the distribution. You can install MySQL on Solaris using a binary package in PKG format instead of the binary tarball distribution. Before installing using the binary PKG format, you should create the mysql user and group, for example: groupadd mysql useradd -g mysql mysql Some basic PKG-handling commands follow: * To add a package: pkgadd -d package_name.pkg * To remove a package: pkgrm package_name * To get a full list of installed packages: pkginfo * To get detailed information for a package: pkginfo -l package_name * To list the files belonging to a package: pkgchk -v package_name * To get packaging information for an arbitrary file: pkgchk -l -p file_name 2.8.1. Solaris Notes For information about installing MySQL on Solaris using PKG distributions, see Section 2.8, "Installing MySQL on Solaris." On Solaris, you may run into trouble even before you get the MySQL distribution unpacked, as the Solaris tar cannot handle long file names. This means that you may see errors when you try to unpack MySQL. If this occurs, you must use GNU tar (gtar) to unpack the distribution. If you have an UltraSPARC system, you can get 4% better performance by adding -mcpu=v8 -Wa,-xarch=v8plusa to the CFLAGS and CXXFLAGS environment variables. If you have Sun's Forte 5.0 (or newer) compiler, you can run configure like this: CC=cc CFLAGS="-Xa -fast -native -xstrconst -mt" \ CXX=CC CXXFLAGS="-noex -mt" \ ./configure --prefix=/usr/local/mysql --enable-assembler To create a 64-bit binary with Sun's Forte compiler, use the following configuration options: CC=cc CFLAGS="-Xa -fast -native -xstrconst -mt -xarch=v9" \ CXX=CC CXXFLAGS="-noex -mt -xarch=v9" ASFLAGS="-xarch=v9" \ ./configure --prefix=/usr/local/mysql --enable-assembler To create a 64-bit Solaris binary using gcc, add -m64 to CFLAGS and CXXFLAGS and remove --enable-assembler from the configure line. In the MySQL benchmarks, we obtained a 4% speed increase on UltraSPARC when using Forte 5.0 in 32-bit mode, as compared to using gcc 3.2 with the -mcpu flag. If you create a 64-bit mysqld binary, it is 4% slower than the 32-bit binary, but can handle more threads and memory. When using Solaris 10 for x86_64, you should mount any file systems on which you intend to store InnoDB files with the forcedirectio option. (By default mounting is done without this option.) Failing to do so will cause a significant drop in performance when using the InnoDB storage engine on this platform. If you get a problem with fdatasync or sched_yield, you can fix this by adding LIBS=-lrt to the configure line Solaris does not provide static versions of all system libraries (libpthreads and libdl), so you cannot compile MySQL with --static. If you try to do so, you get one of the following errors: ld: fatal: library -ldl: not found undefined reference to `dlopen' cannot find -lrt If you link your own MySQL client programs, you may see the following error at runtime: ld.so.1: fatal: libmysqlclient.so.#: open failed: No such file or directory This problem can be avoided by one of the following methods: * Link clients with the -Wl,r/full/path/to/libmysqlclient.so flag rather than with -Lpath). * Copy libmysqclient.so to /usr/lib. * Add the path name of the directory where libmysqlclient.so is located to the LD_RUN_PATH environment variable before running your client. If you have problems with configure trying to link with -lz when you don't have zlib installed, you have two options: * If you want to be able to use the compressed communication protocol, you need to get and install zlib from ftp.gnu.org. * Run configure with the --with-named-z-libs=no option when building MySQL. If you are using gcc and have problems with loading user-defined functions (UDFs) into MySQL, try adding -lgcc to the link line for the UDF. If you would like MySQL to start automatically, you can copy support-files/mysql.server to /etc/init.d and create a symbolic link to it named /etc/rc3.d/S99mysql.server. If too many processes try to connect very rapidly to mysqld, you should see this error in the MySQL log: Error in accept: Protocol error You might try starting the server with the --back_log=50 option as a workaround for this. (Use -O back_log=50 before MySQL 4.) To configure the generation of core files on Solaris you should use the coreadm command. Because of the security implications of generating a core on a setuid() application, by default, Solaris does not support core files on setuid() programs. However, you can modify this behavior using coreadm. If you enable setuid() core files for the current user, they will be generated using the mode 600 and owned by the superuser. 2.9. Installing MySQL on i5/OS The i5/OS POWER MySQL package was created in cooperation with IBM. MySQL works within the Portable Application Solution Environment (PASE) on the System i series of hardware and will also provide database services for the Zend Core for i5/OS. MySQL for i5/OS is provided both as a tar file and as a save file (.savf) package that can be downloaded and installed directly without any additional installation steps required. To install MySQL using the tar file, see Section 2.2, "Installing MySQL from Generic Binaries on Unix/Linux." MySQL is only supported on i5/OS V5R4 or later releases. The i5/OS PASE must be installed for MySQL to operate. You must be able to login as a user in *SECOFR class. You should the installation notes and tips for i5/OS before starting installation. See i5/OS Installation Notes. Before Installation: Note The installation package will use an existing configuration if you have previously installed MySQL (which is identified by looking for the file /etc/my.cnf). The values for the data directory (DATADIR) and owner of the MySQL files (USRPRF) specified during the installation will be ignored, and the values determined from the /etc/my.cnf will be used instead. If you want to change these parameters during a new install, you should temporarily rename /etc/my.cnf, install MySQL using the new parameters you want to use, and then merge your previous /etc/my.cnf configuration settings with the new /etc/my.cnf file that is created during installation. * You must have a user profile with PASE with suitable privileges. The user should be within the *SECOFR class, such as the QSECOFR user ID. You can use the WRKUSRPRF command to check your user profile. * For network connections to MySQL, you must have TCP/IP enabled. You should also check the following: + Ensure that a name has defined for the system. Run the Configure TCP/IP (CFGTCP) command and select option 12 (Change TCP/IP domain information) to display this setting. Make sure that a value is listed in the Host name field. + Make sure that the system has a loopback entry which represents the localhost or 127.0.0.1. + Ensure that the IP address of the IBM i machine is mapped correctly to the host name. To install MySQL on i5/OS, follow these steps: 1. On the System i machine, create a save file that will be used to receive the downloaded installation save file. The file should be located within the General Purpose Library (QGPL): CRTSAVF FILE(QGPL/MYSQLINST) TESXT('MySQL Save file') 2. Download the MySQL installation save file in 32-bit (mysql-5.1.39-i5os-power-32bit.savf) or 64-bit (mysql-5.1.39-i5os-power-64bit.savf) from MySQL Downloads (http://dev.mysql.com/downloads). 3. You need to FTP the downloaded .savf file directly into the QGPL/MYSQLINST file on the System i server. You can do this through FTP using the following steps after logging in to the System i machine: ftp> bin ftp> cd qgpl ftp> put mysql-5.1.39-i5os-power.savf mysqlinst 4. Log into the System i server using a user in the *SECOFR class, such as the QSECOFR user ID. 5. You need to restore the installation library stored in the .savf save file: RSTLIB MYSQLINST DEV(*SAVF) SAVF(QGPL/MYSQLINST) MBROPT(*ALL) ALWOBJD IF(*ALL) Note You can ignore the security changes-type message at the bottom of the installation panel. 6. Once you have finished restoring the MYSQLINST library, check that all the necessary objects for installation are on the system by using the Display Library (DSPLIB) command: DSPLIB LIB(MYSQLINST) 7. You need to execute the installation command, MYSQLINST/INSMYSQL. You can specify three parameter settings during installation: + DIR('/QOpenSys/usr/local/mysql') sets the installation location for the MySQL files. The directory will be created if it does not already exist. + DATADIR('/QOpenSys/usr/local/mysql/data') sets the location of the directory that will be used to store the database files and binary logs. The default setting is /QOpenSys/usr/local/mysql/data. Note that if the installer detects an existing installation (due to the existence of /etc/my.cnf), then the existing setting will be used instead of the default. + USRPRF(MYSQL) sets the user profile that will own the files that are installed. The profile will be created if it does not already exist. Note You should choose an appropriate user for using the MySQL server installation. The user will be used whenever you need to do any administration on the MySQL server. Once you have set the appropriate parameters, you can begin the installation. The installation copies all the necessary files into a directory matching the DIR configuration value; sets the ownership on those files, sets up the MySQL environment and creates the MySQL configuration file (in /etc/my.cnf) completing all the steps in a typical binary installation process automatically. If this is a new installation of MySQL, or if the installer detects that this is a new version (because the /etc/my.cnf file does not exist), then the initial core MySQL databases will also be created during installation. Once the installation has been completed, you will get a notice advising you to set the password for the root user. For more information, Section 2.13, "Post-Installation Setup and Testing." 8. Once the installation has completed, you can delete the installation file: DLTLIB LIB(MYSQLINST) Upgrading an existing MySQL instance You need to execute the upgrade command, MYSQLINST/UPGMYSQL. Note You cannot use MYSQLINST/UPGMYSQL to upgrade between major versions of MySQL (for example from 5.0 to 5.1). For information and advice on migrating between major versions you can use the advice provided in Section 2.4.1.1, "Upgrading from MySQL 5.0 to 5.1." You must specify 6 parameters to perform an upgrade: * DIR('/QOpenSys/usr/local/') --- sets the installation location for the MySQL files. The directory will be created if it does not already exist. This is the directory that the MySQL server will be installed into, inside a directory with a name matching the version and release. For example, if installing MySQL 5.1.39 with the DIR set to /QOpenSys/usr/local/ would result in /QOpenSys/usr/local/mysql-5.1.39-i5os-power64 and a symbolic link to this directory will be created in /QOpenSys/usr/local/mysql. * DATADIR('/QOpenSys/mysql/data') --- sets the location of the directory that will be upgraded. * USRPRF('MYSQL') --- sets the user profile that will own the files that are installed. The profile will be created if it does not already exist; if it is created as part of the upgrade process, it will be disabled initially. You may wish to enable this user profile so that it can be used to start the MySQL server later. It is best practice to use the one previously created during the first installation. * MYSQLUSR('root user') --- any user account in the current MySQL server with SUPER privileges. * PASSWORD('root user password') --- the password for the above account. This is necessary as the upgrade starts the MySQL server to upgrade the tables and the password is need to be able to shutdown the MySQL server. * CURINST('path to previous install') --- the full path to the installation that is being upgraded. For example an installation in /QOpenSys/usr/local/ will be /QOpenSys/usr/local/msyql-5.1.30-i5os-power64. Failure to specify this option may result in corruption of your existing data files. For example: MYSQLINST/UPGMYSQL DIR('/QOpenSys/usr/local/') DATADIR('/QOpenSys/mys ql/data') » USERPRF(MYSQL) MYSQLUSR('root') PASSWORD('root') CURINST('/QOpen Sys/usr/local/mysql-5.1.30-i5os-power64') You should receive a Program Message indicating UPGRADE SUCCESSFUL! upon completion or an error message if there is a problem.You can view the upgrade programs progression and the error in the text file upgrade.log in the installation directory. To start MySQL: 1. Log into the System i server using the user profile create or specified during installation. By default, this is MYSQL. Note You should start mysqld_safe using a user that in the PASE environment has the id=0 (the equivalent of the standard Unix root user). If you do not use a user with this ID then the system will be unable to change the user when executing mysqld as set using --user option. If this happens, mysqld may be unable to read the files located within the MySQL data directory and the execution will fail. 2. Enter the PASE environment using call qp2term. 3. Start the MySQL server by changing to the installation directory and running mysqld_safe, specifying the user name used to install the server. The installer conveniently installs a symbolic link to the installation directory (mysql-5.0.42-i5os-power-32bit) as /opt/mysql/mysql: > cd /opt/mysql/mysql > bin/mysqld_safe --user=mysql & You should see a message similar to the following: Starting mysqld daemon with databases » from /opt/mysql/mysql-enterprise-5.0.42-i5os-power-32bit/data If you are having problems starting MySQL server, see Section 2.13.1.3, "Starting and Troubleshooting the MySQL Server." To stop MySQL: 1. Log into the System i server using the user profile create or specified during installation. By default, this is MYSQL. 2. Enter the PASE environment using call qp2term. 3. Stop the MySQL server by changing into the installation directory and running mysqladmin, specifying the user name used to install the server: > cd /opt/mysql/mysql > bin/mysqladmin -u root shutdown If the session that you started and stopped MySQL are the same, you may get the log output from mysqld: STOPPING server from pid file » /opt/mysql/mysql-enterprise-5.0.42-i5os-power-32bit/data/I5DBX.R CHLAND.IBM.COM.pid 070718 10:34:20 mysqld ended If the sessions used to start and stop MySQL are different, you will not receive any confirmation of the shutdown. Note and tips * A problem has been identified with the installation process on DBCS systems. If you are having problems install MySQL on a DBCS system, you need to change your job's coded character set identifier (CSSID) to 37 (EBCDIC) before executing the install command, INSMYSQL. To do this, determine your existing CSSID (using DSPJOB and selecting option 2), execute CHGJOB CSSID(37), run INSMYSQL to install MySQL and then execute CHGJOB again with your original CSSID. * If you want to use the Perl scripts that are included with MySQL, you need to download the iSeries Tools for Developers (5799-PTL). See http://www-03.ibm.com/servers/enable/site/porting/tools/. 2.10. Installing MySQL on FreeBSD This section provides information about using MySQL on variants of FreeBSD Unix. The easiest (and preferred) way to install MySQL is to use the mysql-server and mysql-client ports available at http://www.freebsd.org/. Using these ports gives you the following benefits: * A working MySQL with all optimizations enabled that are known to work on your version of FreeBSD. * Automatic configuration and build. * Startup scripts installed in /usr/local/etc/rc.d. * The ability to use pkg_info -L to see which files are installed. * The ability to use pkg_delete to remove MySQL if you no longer want it on your machine. The MySQL build process requires GNU make (gmake) to work. If GNU make is not available, you must install it first before compiling MySQL. The recommended way to compile and install MySQL on FreeBSD with gcc (2.95.2 and up) is: CC=gcc CFLAGS="-O2 -fno-strength-reduce" \ CXX=gcc CXXFLAGS="-O2 -fno-rtti -fno-exceptions \ -felide-constructors -fno-strength-reduce" \ ./configure --prefix=/usr/local/mysql --enable-assembler gmake gmake install cd /usr/local/mysql bin/mysql_install_db --user=mysql bin/mysqld_safe & FreeBSD is known to have a very low default file handle limit. See Section B.5.2.18, "'File' Not Found and Similar Errors." Start the server by using the --open-files-limit option for mysqld_safe, or raise the limits for the mysqld user in /etc/login.conf and rebuild it with cap_mkdb /etc/login.conf. Also be sure that you set the appropriate class for this user in the password file if you are not using the default (use chpass mysqld-user-name). See Section 4.3.2, "mysqld_safe --- MySQL Server Startup Script." In current versions of FreeBSD (at least 4.x and greater), you may increase the limit on the amount of memory available for a process by adding the following entries to the /boot/loader.conf file and rebooting the machine (these are not settings that can be changed at run time with the sysctl command): kern.maxdsiz="1073741824" # 1GB kern.dfldsiz="1073741824" # 1GB kern.maxssiz="134217728" # 128MB For older versions of FreeBSD, you must recompile your kernel to change the maximum data segment size for a process. In this case, you should look at the MAXDSIZ option in the LINT config file for more information. If you get problems with the current date in MySQL, setting the TZ variable should help. See Section 2.14, "Environment Variables." 2.11. Installing MySQL on HP-UX If you install MySQL using a binary tarball distribution on HP-UX, you may run into trouble even before you get the MySQL distribution unpacked, as the HP-UX tar cannot handle long file names. This means that you may see errors when you try to unpack MySQL. If this occurs, you must use GNU tar (gtar) to unpack the distribution. Because of some critical bugs in the standard HP-UX libraries, you should install the following patches before trying to run MySQL on HP-UX 11.0: PHKL_22840 Streams cumulative PHNE_22397 ARPA cumulative This solves the problem of getting EWOULDBLOCK from recv() and EBADF from accept() in threaded applications. If you are using gcc 2.95.1 on an unpatched HP-UX 11.x system, you may get the following error: In file included from /usr/include/unistd.h:11, from ../include/global.h:125, from mysql_priv.h:15, from item.cc:19: /usr/include/sys/unistd.h:184: declaration of C function ... /usr/include/sys/pthread.h:440: previous declaration ... In file included from item.h:306, from mysql_priv.h:158, from item.cc:19: The problem is that HP-UX does not define pthreads_atfork() consistently. It has conflicting prototypes in /usr/include/sys/unistd.h:184 and /usr/include/sys/pthread.h:440. One solution is to copy /usr/include/sys/unistd.h into mysql/include and edit unistd.h and change it to match the definition in pthread.h. Look for this line: extern int pthread_atfork(void (*prepare)(), void (*parent)(), void (*child)()); Change it to look like this: extern int pthread_atfork(void (*prepare)(void), void (*parent)(void) , void (*child)(void)); After making the change, the following configure line should work: CFLAGS="-fomit-frame-pointer -O3 -fpic" CXX=gcc \ CXXFLAGS="-felide-constructors -fno-exceptions -fno-rtti -O3" \ ./configure --prefix=/usr/local/mysql --disable-shared If you are using HP-UX compiler, you can use the following command (which has been tested with cc B.11.11.04): CC=cc CXX=aCC CFLAGS=+DD64 CXXFLAGS=+DD64 ./configure \ --with-extra-character-set=complex You can ignore any errors of the following type: aCC: warning 901: unknown option: `-3': use +help for online documentation If you get the following error from configure, verify that you don't have the path to the K&R compiler before the path to the HP-UX C and C++ compiler: checking for cc option to accept ANSI C... no configure: error: MySQL requires an ANSI C compiler (and a C++ compil er). Try gcc. See the Installation chapter in the Reference Manual. Another reason for not being able to compile is that you didn't define the +DD64 flags as just described. Another possibility for HP-UX 11 is to use the MySQL binaries provided at http://dev.mysql.com/downloads/, which we have built and tested ourselves. We have also received reports that the HP-UX 10.20 binaries supplied by MySQL can be run successfully on HP-UX 11. If you encounter problems, you should be sure to check your HP-UX patch level. 2.12. Installing MySQL on AIX Automatic detection of xlC is missing from Autoconf, so a number of variables need to be set before running configure. The following example uses the IBM compiler: export CC="xlc_r -ma -O3 -qstrict -qoptimize=3 -qmaxmem=8192 " export CXX="xlC_r -ma -O3 -qstrict -qoptimize=3 -qmaxmem=8192" export CFLAGS="-I /usr/local/include" export LDFLAGS="-L /usr/local/lib" export CPPFLAGS=$CFLAGS export CXXFLAGS=$CFLAGS ./configure --prefix=/usr/local \ --localstatedir=/var/mysql \ --sbindir='/usr/local/bin' \ --libexecdir='/usr/local/bin' \ --enable-thread-safe-client \ --enable-large-files The preceding options are used to compile the MySQL distribution that can be found at http://www-frec.bull.com/. If you change the -O3 to -O2 in the preceding configure line, you must also remove the -qstrict option. This is a limitation in the IBM C compiler. If you are using gcc to compile MySQL, you must use the -fno-exceptions flag, because the exception handling in gcc is not thread-safe! There are also some known problems with IBM's assembler that may cause it to generate bad code when used with gcc. Use the following configure line with gcc 2.95 on AIX: CC="gcc -pipe -mcpu=power -Wa,-many" \ CXX="gcc -pipe -mcpu=power -Wa,-many" \ CXXFLAGS="-felide-constructors -fno-exceptions -fno-rtti" \ ./configure --prefix=/usr/local/mysql --with-low-memory The -Wa,-many option is necessary for the compile to be successful. IBM is aware of this problem but is in no hurry to fix it because of the workaround that is available. We don't know if the -fno-exceptions is required with gcc 2.95, but because MySQL doesn't use exceptions and the option generates faster code, you should always use it with gcc. If you get a problem with assembler code, try changing the -mcpu=xxx option to match your CPU. Typically power2, power, or powerpc may need to be used. Alternatively, you might need to use 604 or 604e. We are not positive but suspect that power would likely be safe most of the time, even on a power2 machine. If you don't know what your CPU is, execute a uname -m command. It produces a string that looks like 000514676700, with a format of xxyyyyyymmss where xx and ss are always 00, yyyyyy is a unique system ID and mm is the ID of the CPU Planar. A chart of these values can be found at http://www16.boulder.ibm.com/pseries/en_US/cmds/aixcmds5/uname.htm . This gives you a machine type and a machine model you can use to determine what type of CPU you have. If you have problems with threads on AIX 5.3, you should upgrade AIX 5.3 to technology level 7 (5300-07). If you have problems with signals (MySQL dies unexpectedly under high load), you may have found an OS bug with threads and signals. In this case, you can tell MySQL not to use signals by configuring as follows: CFLAGS=-DDONT_USE_THR_ALARM CXX=gcc \ CXXFLAGS="-felide-constructors -fno-exceptions -fno-rtti \ -DDONT_USE_THR_ALARM" \ ./configure --prefix=/usr/local/mysql --with-debug \ --with-low-memory This doesn't affect the performance of MySQL, but has the side effect that you can't kill clients that are "sleeping" on a connection with mysqladmin kill or mysqladmin shutdown. Instead, the client dies when it issues its next command. On some versions of AIX, linking with libbind.a makes getservbyname() dump core. This is an AIX bug and should be reported to IBM. For AIX 4.2.1 and gcc, you have to make the following changes. After configuring, edit config.h and include/my_config.h and change the line that says this: #define HAVE_SNPRINTF 1 to this: #undef HAVE_SNPRINTF And finally, in mysqld.cc, you need to add a prototype for initgroups(). #ifdef _AIX41 extern "C" int initgroups(const char *,int); #endif For 32-bit binaries, if you need to allocate a lot of memory to the mysqld process, it is not enough to just use ulimit -d unlimited. You may also have to modify mysqld_safe to add a line something like this: export LDR_CNTRL='MAXDATA=0x80000000' You can find more information about using a lot of memory at http://publib16.boulder.ibm.com/pseries/en_US/aixprggd/genprogc/lr g_prg_support.htm. Users of AIX 4.3 should use gmake instead of the make utility included with AIX. As of AIX 4.1, the C compiler has been unbundled from AIX as a separate product. gcc 3.3.2 can be obtained here: ftp://ftp.software.ibm.com/aix/freeSoftware/aixtoolbox/RPMS/ppc/gc c/ The steps for compiling MySQL on AIX with gcc 3.3.2 are similar to those for using gcc 2.95 (in particular, the need to edit config.h and my_config.h after running configure). However, before running configure, you should also patch the curses.h file as follows: /opt/freeware/lib/gcc-lib/powerpc-ibm-aix5.2.0.0/3.3.2/include/curses .h.ORIG Mon Dec 26 02:17:28 2005 --- /opt/freeware/lib/gcc-lib/powerpc-ibm-aix5.2.0.0/3.3.2/include/cu rses.h Mon Dec 26 02:40:13 2005 *************** *** 2023,2029 **** #endif /* _AIX32_CURSES */ ! #if defined(__USE_FIXED_PROTOTYPES__) || defined(__cplusplus) || de fined (__STRICT_ANSI__) extern int delwin (WINDOW *); extern int endwin (void); extern int getcurx (WINDOW *); --- 2023,2029 ---- #endif /* _AIX32_CURSES */ ! #if 0 && (defined(__USE_FIXED_PROTOTYPES__) || defined(__cplusplus) || defined (__STRICT_ANSI__)) extern int delwin (WINDOW *); extern int endwin (void); extern int getcurx (WINDOW *); 2.13. Post-Installation Setup and Testing After installing MySQL, there are some issues that you should address. For example, on Unix, you should initialize the data directory and create the MySQL grant tables. On all platforms, an important security concern is that the initial accounts in the grant tables have no passwords. You should assign passwords to prevent unauthorized access to the MySQL server. Optionally, you can create time zone tables to enable recognition of named time zones. The following sections include post-installation procedures that are specific to Windows systems and to Unix systems. Another section, Section 2.13.1.3, "Starting and Troubleshooting the MySQL Server," applies to all platforms; it describes what to do if you have trouble getting the server to start. Section 2.13.2, "Securing the Initial MySQL Accounts," also applies to all platforms. You should follow its instructions to make sure that you have properly protected your MySQL accounts by assigning passwords to them. When you are ready to create additional user accounts, you can find information on the MySQL access control system and account management in Section 5.4, "The MySQL Access Privilege System," and Section 5.5, "MySQL User Account Management." 2.13.1. Unix Post-Installation Procedures After installing MySQL on Unix, you need to initialize the grant tables, start the server, and make sure that the server works satisfactorily. You may also wish to arrange for the server to be started and stopped automatically when your system starts and stops. You should also assign passwords to the accounts in the grant tables. On Unix, the grant tables are set up by the mysql_install_db program. For some installation methods, this program is run for you automatically: * If you install MySQL on Linux using RPM distributions, the server RPM runs mysql_install_db. * If you install MySQL on Mac OS X using a PKG distribution, the installer runs mysql_install_db. Otherwise, you'll need to run mysql_install_db yourself. The following procedure describes how to initialize the grant tables (if that has not previously been done) and then start the server. It also suggests some commands that you can use to test whether the server is accessible and working properly. For information about starting and stopping the server automatically, see Section 2.13.1.2, "Starting and Stopping MySQL Automatically." After you complete the procedure and have the server running, you should assign passwords to the accounts created by mysql_install_db. Instructions for doing so are given in Section 2.13.2, "Securing the Initial MySQL Accounts." In the examples shown here, the server runs under the user ID of the mysql login account. This assumes that such an account exists. Either create the account if it does not exist, or substitute the name of a different existing login account that you plan to use for running the server. 1. Change location into the top-level directory of your MySQL installation, represented here by BASEDIR: shell> cd BASEDIR BASEDIR is likely to be something like /usr/local/mysql or /usr/local. The following steps assume that you are located in this directory. 2. If necessary, run the mysql_install_db program to set up the initial MySQL grant tables containing the privileges that determine how users are allowed to connect to the server. You'll need to do this if you used a distribution type for which the installation procedure doesn't run the program for you. Typically, mysql_install_db needs to be run only the first time you install MySQL, so you can skip this step if you are upgrading an existing installation, However, mysql_install_db does not overwrite any existing privilege tables, so it should be safe to run in any circumstances. To initialize the grant tables, use one of the following commands, depending on whether mysql_install_db is located in the bin or scripts directory: shell> bin/mysql_install_db --user=mysql shell> scripts/mysql_install_db --user=mysql It might be necessary to specify other options such as --basedir or --datadir if mysql_install_db does not use the correct locations for the installation directory or data directory. For example: shell> bin/mysql_install_db --user=mysql \ --basedir=/opt/mysql/mysql \ --datadir=/opt/mysql/mysql/data The mysql_install_db script creates the server's data directory. Under the data directory, it creates directories for the mysql database that holds all database privileges and the test database that you can use to test MySQL. The script also creates privilege table entries for root and anonymous-user accounts. The accounts have no passwords initially. A description of their initial privileges is given in Section 2.13.2, "Securing the Initial MySQL Accounts." Briefly, these privileges allow the MySQL root user to do anything, and allow anybody to create or use databases with a name of test or starting with test_. It is important to make sure that the database directories and files are owned by the mysql login account so that the server has read and write access to them when you run it later. To ensure this, the --user option should be used as shown if you run mysql_install_db as root. Otherwise, you should execute the script while logged in as mysql, in which case you can omit the --user option from the command. mysql_install_db creates several tables in the mysql database, including user, db, host, tables_priv, columns_priv, func, and others. See Section 5.4, "The MySQL Access Privilege System," for a complete listing and description of these tables. If you don't want to have the test database, you can remove it with mysqladmin -u root drop test after starting the server. If you have trouble with mysql_install_db at this point, see Section 2.13.1.1, "Problems Running mysql_install_db." 3. Start the MySQL server: shell> bin/mysqld_safe --user=mysql & It is important that the MySQL server be run using an unprivileged (non-root) login account. To ensure this, the --user option should be used as shown if you run mysqld_safe as system root. Otherwise, you should execute the script while logged in to the system as mysql, in which case you can omit the --user option from the command. Further instructions for running MySQL as an unprivileged user are given in Section 5.3.6, "How to Run MySQL as a Normal User." If you neglected to create the grant tables before proceeding to this step, the following message appears in the error log file when you start the server: mysqld: Can't find file: 'host.frm' If you have other problems starting the server, see Section 2.13.1.3, "Starting and Troubleshooting the MySQL Server." 4. Use mysqladmin to verify that the server is running. The following commands provide simple tests to check whether the server is up and responding to connections: shell> bin/mysqladmin version shell> bin/mysqladmin variables The output from mysqladmin version varies slightly depending on your platform and version of MySQL, but should be similar to that shown here: shell> bin/mysqladmin version mysqladmin Ver 14.12 Distrib 5.1.46, for pc-linux-gnu on i686 ... Server version 5.1.46 Protocol version 10 Connection Localhost via UNIX socket UNIX socket /var/lib/mysql/mysql.sock Uptime: 14 days 5 hours 5 min 21 sec Threads: 1 Questions: 366 Slow queries: 0 Opens: 0 Flush tables: 1 Open tables: 19 Queries per second avg: 0.000 To see what else you can do with mysqladmin, invoke it with the --help option. 5. Verify that you can shut down the server: shell> bin/mysqladmin -u root shutdown 6. Verify that you can start the server again. Do this by using mysqld_safe or by invoking mysqld directly. For example: shell> bin/mysqld_safe --user=mysql --log & If mysqld_safe fails, see Section 2.13.1.3, "Starting and Troubleshooting the MySQL Server." 7. Run some simple tests to verify that you can retrieve information from the server. The output should be similar to what is shown here: shell> bin/mysqlshow +-----------+ | Databases | +-----------+ | mysql | | test | +-----------+ shell> bin/mysqlshow mysql Database: mysql +---------------------------+ | Tables | +---------------------------+ | columns_priv | | db | | func | | help_category | | help_keyword | | help_relation | | help_topic | | host | | proc | | procs_priv | | tables_priv | | time_zone | | time_zone_leap_second | | time_zone_name | | time_zone_transition | | time_zone_transition_type | | user | +---------------------------+ shell> bin/mysql -e "SELECT Host,Db,User FROM db" mysql +------+--------+------+ | host | db | user | +------+--------+------+ | % | test | | | % | test_% | | +------+--------+------+ 8. There is a benchmark suite in the sql-bench directory (under the MySQL installation directory) that you can use to compare how MySQL performs on different platforms. The benchmark suite is written in Perl. It requires the Perl DBI module that provides a database-independent interface to the various databases, and some other additional Perl modules: DBI DBD::mysql Data::Dumper Data::ShowTable These modules can be obtained from CPAN (http://www.cpan.org/). See also Section 2.15.1, "Installing Perl on Unix." The sql-bench/Results directory contains the results from many runs against different databases and platforms. To run all tests, execute these commands: shell> cd sql-bench shell> perl run-all-tests If you don't have the sql-bench directory, you probably installed MySQL using RPM files other than the source RPM. (The source RPM includes the sql-bench benchmark directory.) In this case, you must first install the benchmark suite before you can use it. There are separate benchmark RPM files named mysql-bench-VERSION.i386.rpm that contain benchmark code and data. If you have a source distribution, there are also tests in its tests subdirectory that you can run. For example, to run auto_increment.tst, execute this command from the top-level directory of your source distribution: shell> mysql -vvf test < ./tests/auto_increment.tst The expected result of the test can be found in the ./tests/auto_increment.res file. 9. At this point, you should have the server running. However, none of the initial MySQL accounts have a password, so you should assign passwords using the instructions found in Section 2.13.2, "Securing the Initial MySQL Accounts." The MySQL 5.1 installation procedure creates time zone tables in the mysql database. However, you must populate the tables manually using the instructions in Section 9.6, "MySQL Server Time Zone Support." 2.13.1.1. Problems Running mysql_install_db The purpose of the mysql_install_db script is to generate new MySQL privilege tables. It does not overwrite existing MySQL privilege tables, and it does not affect any other data. If you want to re-create your privilege tables, first stop the mysqld server if it is running. Then rename the mysql directory under the data directory to save it, and then run mysql_install_db. Suppose that your current directory is the MySQL installation directory and that mysql_install_db is located in the bin directory and the data directory is named data. To rename the mysql database and re-run mysql_install_db, use these commands. shell> mv data/mysql data/mysql.old shell> bin/mysql_install_db --user=mysql When you run mysql_install_db, you might encounter the following problems: * mysql_install_db fails to install the grant tables You may find that mysql_install_db fails to install the grant tables and terminates after displaying the following messages: Starting mysqld daemon with databases from XXXXXX mysqld ended In this case, you should examine the error log file very carefully. The log should be located in the directory XXXXXX named by the error message and should indicate why mysqld didn't start. If you do not understand what happened, include the log when you post a bug report. See Section 1.7, "How to Report Bugs or Problems." * There is a mysqld process running This indicates that the server is running, in which case the grant tables have probably been created already. If so, there is no need to run mysql_install_db at all because it needs to be run only once (when you install MySQL the first time). * Installing a second mysqld server does not work when one server is running This can happen when you have an existing MySQL installation, but want to put a new installation in a different location. For example, you might have a production installation, but you want to create a second installation for testing purposes. Generally the problem that occurs when you try to run a second server is that it tries to use a network interface that is in use by the first server. In this case, you should see one of the following error messages: Can't start server: Bind on TCP/IP port: Address already in use Can't start server: Bind on unix socket... For instructions on setting up multiple servers, see Section 5.6, "Running Multiple MySQL Servers on the Same Machine." * You do not have write access to the /tmp directory If you do not have write access to create temporary files or a Unix socket file in the default location (the /tmp directory), an error occurs when you run mysql_install_db or the mysqld server. You can specify different locations for the temporary directory and Unix socket file by executing these commands prior to starting mysql_install_db or mysqld, where some_tmp_dir is the full path name to some directory for which you have write permission: shell> TMPDIR=/some_tmp_dir/ shell> MYSQL_UNIX_PORT=/some_tmp_dir/mysql.sock shell> export TMPDIR MYSQL_UNIX_PORT Then you should be able to run mysql_install_db and start the server with these commands: shell> bin/mysql_install_db --user=mysql shell> bin/mysqld_safe --user=mysql & If mysql_install_db is located in the scripts directory, modify the first command to scripts/mysql_install_db. See Section B.5.4.5, "How to Protect or Change the MySQL Unix Socket File," and Section 2.14, "Environment Variables." There are some alternatives to running the mysql_install_db script provided in the MySQL distribution: * If you want the initial privileges to be different from the standard defaults, you can modify mysql_install_db before you run it. However, it is preferable to use GRANT and REVOKE to change the privileges after the grant tables have been set up. In other words, you can run mysql_install_db, and then use mysql -u root mysql to connect to the server as the MySQL root user so that you can issue the necessary GRANT and REVOKE statements. If you want to install MySQL on several machines with the same privileges, you can put the GRANT and REVOKE statements in a file and execute the file as a script using mysql after running mysql_install_db. For example: shell> bin/mysql_install_db --user=mysql shell> bin/mysql -u root < your_script_file By doing this, you can avoid having to issue the statements manually on each machine. * It is possible to re-create the grant tables completely after they have previously been created. You might want to do this if you're just learning how to use GRANT and REVOKE and have made so many modifications after running mysql_install_db that you want to wipe out the tables and start over. To re-create the grant tables, remove all the .frm, .MYI, and .MYD files in the mysql database directory. Then run the mysql_install_db script again. * You can start mysqld manually using the --skip-grant-tables option and add the privilege information yourself using mysql: shell> bin/mysqld_safe --user=mysql --skip-grant-tables & shell> bin/mysql mysql From mysql, manually execute the SQL commands contained in mysql_install_db. Make sure that you run mysqladmin flush-privileges or mysqladmin reload afterward to tell the server to reload the grant tables. Note that by not using mysql_install_db, you not only have to populate the grant tables manually, you also have to create them first. 2.13.1.2. Starting and Stopping MySQL Automatically Generally, you start the mysqld server in one of these ways: * Invoke mysqld directly. This works on any platform. * Run the MySQL server as a Windows service. The service can be set to start the server automatically when Windows starts, or as a manual service that you start on request. For instructions, see Section 2.5.5.6, "Starting MySQL as a Windows Service." * Invoke mysqld_safe, which tries to determine the proper options for mysqld and then runs it with those options. This script is used on Unix and Unix-like systems. See Section 4.3.2, "mysqld_safe --- MySQL Server Startup Script." * Invoke mysql.server. This script is used primarily at system startup and shutdown on systems that use System V-style run directories, where it usually is installed under the name mysql. The mysql.server script starts the server by invoking mysqld_safe. See Section 4.3.3, "mysql.server --- MySQL Server Startup Script." * On Mac OS X, install a separate MySQL Startup Item package to enable the automatic startup of MySQL on system startup. The Startup Item starts the server by invoking mysql.server. See Section 2.7, "Installing MySQL on Mac OS X," for details. The mysqld_safe and mysql.server scripts and the Mac OS X Startup Item can be used to start the server manually, or automatically at system startup time. mysql.server and the Startup Item also can be used to stop the server. To start or stop the server manually using the mysql.server script, invoke it with start or stop arguments: shell> mysql.server start shell> mysql.server stop Before mysql.server starts the server, it changes location to the MySQL installation directory, and then invokes mysqld_safe. If you want the server to run as some specific user, add an appropriate user option to the [mysqld] group of the /etc/my.cnf option file, as shown later in this section. (It is possible that you will need to edit mysql.server if you've installed a binary distribution of MySQL in a nonstandard location. Modify it to change location into the proper directory before it runs mysqld_safe. If you do this, your modified version of mysql.server may be overwritten if you upgrade MySQL in the future, so you should make a copy of your edited version that you can reinstall.) mysql.server stop stops the server by sending a signal to it. You can also stop the server manually by executing mysqladmin shutdown. To start and stop MySQL automatically on your server, you need to add start and stop commands to the appropriate places in your /etc/rc* files. If you use the Linux server RPM package (MySQL-server-VERSION.rpm), the mysql.server script is installed in the /etc/init.d directory with the name mysql. You need not install it manually. See Section 2.6.1, "Installing MySQL from RPM Packages on Linux," for more information on the Linux RPM packages. Some vendors provide RPM packages that install a startup script under a different name such as mysqld. If you install MySQL from a source distribution or using a binary distribution format that does not install mysql.server automatically, you can install it manually. The script can be found in the support-files directory under the MySQL installation directory or in a MySQL source tree. To install mysql.server manually, copy it to the /etc/init.d directory with the name mysql, and then make it executable. Do this by changing location into the appropriate directory where mysql.server is located and executing these commands: shell> cp mysql.server /etc/init.d/mysql shell> chmod +x /etc/init.d/mysql Older Red Hat systems use the /etc/rc.d/init.d directory rather than /etc/init.d. Adjust the preceding commands accordingly. Alternatively, first create /etc/init.d as a symbolic link that points to /etc/rc.d/init.d: shell> cd /etc shell> ln -s rc.d/init.d . After installing the script, the commands needed to activate it to run at system startup depend on your operating system. On Linux, you can use chkconfig: shell> chkconfig --add mysql On some Linux systems, the following command also seems to be necessary to fully enable the mysql script: shell> chkconfig --level 345 mysql on On FreeBSD, startup scripts generally should go in /usr/local/etc/rc.d/. The rc(8) manual page states that scripts in this directory are executed only if their basename matches the *.sh shell file name pattern. Any other files or directories present within the directory are silently ignored. In other words, on FreeBSD, you should install the mysql.server script as /usr/local/etc/rc.d/mysql.server.sh to enable automatic startup. As an alternative to the preceding setup, some operating systems also use /etc/rc.local or /etc/init.d/boot.local to start additional services on startup. To start up MySQL using this method, you could append a command like the one following to the appropriate startup file: /bin/sh -c 'cd /usr/local/mysql; ./bin/mysqld_safe --user=mysql &' For other systems, consult your operating system documentation to see how to install startup scripts. You can add options for mysql.server in a global /etc/my.cnf file. A typical /etc/my.cnf file might look like this: [mysqld] datadir=/usr/local/mysql/var socket=/var/tmp/mysql.sock port=3306 user=mysql [mysql.server] basedir=/usr/local/mysql The mysql.server script supports the following options: basedir, datadir, and pid-file. If specified, they must be placed in an option file, not on the command line. mysql.server supports only start and stop as command-line arguments. The following table shows which option groups the server and each startup script read from option files. Script Option Groups mysqld [mysqld], [server], [mysqld-major_version] mysqld_safe [mysqld], [server], [mysqld_safe] mysql.server [mysqld], [mysql.server], [server] [mysqld-major_version] means that groups with names like [mysqld-5.0] and [mysqld-5.1] are read by servers having versions 5.0.x, 5.1.x, and so forth. This feature can be used to specify options that can be read only by servers within a given release series. For backward compatibility, mysql.server also reads the [mysql_server] group and mysqld_safe also reads the [safe_mysqld] group. However, you should update your option files to use the [mysql.server] and [mysqld_safe] groups instead when using MySQL 5.1. See Section 4.2.3.3, "Using Option Files." 2.13.1.3. Starting and Troubleshooting the MySQL Server This section provides troubleshooting suggestions for problems starting the server on Unix. If you are using Windows, see Section 2.5.6, "Troubleshooting a MySQL Installation Under Windows." If you have problems starting the server, here are some things to try: * Check the error log to see why the server does not start. * Specify any special options needed by the storage engines you are using. * Make sure that the server knows where to find the data directory. * Make sure that the server can access the data directory. The ownership and permissions of the data directory and its contents must be set such that the server can read and modify them. * Verify that the network interfaces the server wants to use are available. Some storage engines have options that control their behavior. You can create a my.cnf file and specify startup options for the engines that you plan to use. If you are going to use storage engines that support transactional tables (InnoDB, NDB), be sure that you have them configured the way you want before starting the server: * If you are using InnoDB tables, see Section 13.6.2, "InnoDB Configuration." * If you are using MySQL Cluster, see Section 17.3, "MySQL Cluster Configuration." MySQL Enterprise For expert advice on start-up options appropriate to your circumstances, subscribe to The MySQL Enterprise Monitor. For more information, see http://www.mysql.com/products/enterprise/advisors.html. Storage engines will use default option values if you specify none, but it is recommended that you review the available options and specify explicit values for those for which the defaults are not appropriate for your installation. When the mysqld server starts, it changes location to the data directory. This is where it expects to find databases and where it expects to write log files. The server also writes the pid (process ID) file in the data directory. The data directory location is hardwired in when the server is compiled. This is where the server looks for the data directory by default. If the data directory is located somewhere else on your system, the server will not work properly. You can determine what the default path settings are by invoking mysqld with the --verbose and --help options. If the default locations don't match the MySQL installation layout on your system, you can override them by specifying options to mysqld or mysqld_safe on the command line or in an option file. To specify the location of the data directory explicitly, use the --datadir option. However, normally you can tell mysqld the location of the base directory under which MySQL is installed and it looks for the data directory there. You can do this with the --basedir option. To check the effect of specifying path options, invoke mysqld with those options followed by the --verbose and --help options. For example, if you change location into the directory where mysqld is installed and then run the following command, it shows the effect of starting the server with a base directory of /usr/local: shell> ./mysqld --basedir=/usr/local --verbose --help You can specify other options such as --datadir as well, but --verbose and --help must be the last options. Once you determine the path settings you want, start the server without --verbose and --help. If mysqld is currently running, you can find out what path settings it is using by executing this command: shell> mysqladmin variables Or: shell> mysqladmin -h host_name variables host_name is the name of the MySQL server host. If you get Errcode 13 (which means Permission denied) when starting mysqld, this means that the privileges of the data directory or its contents do not allow the server access. In this case, you change the permissions for the involved files and directories so that the server has the right to use them. You can also start the server as root, but this raises security issues and should be avoided. On Unix, change location into the data directory and check the ownership of the data directory and its contents to make sure the server has access. For example, if the data directory is /usr/local/mysql/var, use this command: shell> ls -la /usr/local/mysql/var If the data directory or its files or subdirectories are not owned by the login account that you use for running the server, change their ownership to that account. If the account is named mysql, use these commands: shell> chown -R mysql /usr/local/mysql/var shell> chgrp -R mysql /usr/local/mysql/var If it possible that even with correct ownership, MySQL may fail to start up if there is other security software running on your system that manages application access to various parts of the file system. In this case, you may need to reconfigure that software to enable mysqld to access the directories it uses during normal operation. If the server fails to start up correctly, check the error log. Log files are located in the data directory (typically C:\Program Files\MySQL\MySQL Server 5.1\data on Windows, /usr/local/mysql/data for a Unix binary distribution, and /usr/local/var for a Unix source distribution). Look in the data directory for files with names of the form host_name.err and host_name.log, where host_name is the name of your server host. Then examine the last few lines of these files. On Unix, you can use tail to display them: shell> tail host_name.err shell> tail host_name.log The error log should contain information that indicates why the server couldn't start. If either of the following errors occur, it means that some other program (perhaps another mysqld server) is using the TCP/IP port or Unix socket file that mysqld is trying to use: Can't start server: Bind on TCP/IP port: Address already in use Can't start server: Bind on unix socket... Use ps to determine whether you have another mysqld server running. If so, shut down the server before starting mysqld again. (If another server is running, and you really want to run multiple servers, you can find information about how to do so in Section 5.6, "Running Multiple MySQL Servers on the Same Machine.") If no other server is running, try to execute the command telnet your_host_name tcp_ip_port_number. (The default MySQL port number is 3306.) Then press Enter a couple of times. If you don't get an error message like telnet: Unable to connect to remote host: Connection refused, some other program is using the TCP/IP port that mysqld is trying to use. You'll need to track down what program this is and disable it, or else tell mysqld to listen to a different port with the --port option. In this case, you'll also need to specify the port number for client programs when connecting to the server via TCP/IP. Another reason the port might be inaccessible is that you have a firewall running that blocks connections to it. If so, modify the firewall settings to allow access to the port. If the server starts but you can't connect to it, you should make sure that you have an entry in /etc/hosts that looks like this: 127.0.0.1 localhost This problem occurs only on systems that do not have a working thread library and for which MySQL must be configured to use MIT-pthreads. If you cannot get mysqld to start, you can try to make a trace file to find the problem by using the --debug option. See MySQL Internals: Porting (http://forge.mysql.com/wiki/MySQL_Internals_Porting). 2.13.2. Securing the Initial MySQL Accounts Part of the MySQL installation process is to set up the mysql database that contains the grant tables: * Windows distributions contain preinitialized grant tables that are installed automatically. * On Unix, the grant tables are populated by the mysql_install_db program. Some installation methods run this program for you. Others require that you execute it manually. For details, see Section 2.13.1, "Unix Post-Installation Procedures." The grant tables define the initial MySQL user accounts and their access privileges. These accounts are set up as follows: * Accounts with the user name root are created. These are superuser accounts that can do anything. The initial root account passwords are empty, so anyone can connect to the MySQL server as root --- without a password --- and be granted all privileges. + On Windows, one root account is created; this account allows connecting from the local host only. The Windows installer will optionally create an account allowing for connections from any host only if the user selects the Enable root access from remote machines option during installation. + On Unix, both root accounts are for connections from the local host. Connections must be made from the local host by specifying a host name of localhost for one of the accounts, or the actual host name or IP number for the other. * Two anonymous-user accounts are created, each with an empty user name. The anonymous accounts have no password, so anyone can use them to connect to the MySQL server. + On Windows, one anonymous account is for connections from the local host. It has no global privileges. (Before MySQL 5.1.16, it has all global privileges, just like the root accounts.) The other is for connections from any host and has all privileges for the test database and for other databases with names that start with test. + On Unix, both anonymous accounts are for connections from the local host. Connections must be made from the local host by specifying a host name of localhost for one of the accounts, or the actual host name or IP number for the other. These accounts have all privileges for the test database and for other databases with names that start with test_. As noted, none of the initial accounts have passwords. This means that your MySQL installation is unprotected until you do something about it: * If you want to prevent clients from connecting as anonymous users without a password, you should either assign a password to each anonymous account or else remove the accounts. * You should assign a password to each MySQL root account. The following instructions describe how to set up passwords for the initial MySQL accounts, first for the anonymous accounts and then for the root accounts. Replace "newpwd" in the examples with the actual password that you want to use. The instructions also cover how to remove the anonymous accounts, should you prefer not to allow anonymous access at all. You might want to defer setting the passwords until later, so that you don't need to specify them while you perform additional setup or testing. However, be sure to set them before using your installation for production purposes. Anonymous Account Password Assignment To assign passwords to the anonymous accounts, connect to the server as root and then use either SET PASSWORD or UPDATE. In either case, be sure to encrypt the password using the PASSWORD() function. To use SET PASSWORD on Windows, do this: shell> mysql -u root mysql> SET PASSWORD FOR ''@'localhost' = PASSWORD('newpwd'); mysql> SET PASSWORD FOR ''@'%' = PASSWORD('newpwd'); To use SET PASSWORD on Unix, do this: shell> mysql -u root mysql> SET PASSWORD FOR ''@'localhost' = PASSWORD('newpwd'); mysql> SET PASSWORD FOR ''@'host_name' = PASSWORD('newpwd'); In the second SET PASSWORD statement, replace host_name with the name of the server host. This is the name that is specified in the Host column of the non-localhost record for root in the user table. If you don't know what host name this is, issue the following statement before using SET PASSWORD: mysql> SELECT Host, User FROM mysql.user; Look for the record that has root in the User column and something other than localhost in the Host column. Then use that Host value in the second SET PASSWORD statement. Anonymous Account Removal If you prefer to remove the anonymous accounts instead, do so as follows: shell> mysql -u root mysql> DROP USER ''; The DROP statement applies both to Windows and to Unix. On Windows, if you want to remove only the anonymous account that has the same privileges as root, do this instead: shell> mysql -u root mysql> DROP USER ''@'localhost'; That account allows anonymous access but has full privileges, so removing it improves security. root Account Password Assignment You can assign passwords to the root accounts in several ways. The following discussion demonstrates three methods: * Use the SET PASSWORD statement * Use the mysqladmin command-line client program * Use the UPDATE statement To assign passwords using SET PASSWORD, connect to the server as root and issue SET PASSWORD statements. Be sure to encrypt the password using the PASSWORD() function. For Windows, do this: shell> mysql -u root mysql> SET PASSWORD FOR 'root'@'localhost' = PASSWORD('newpwd'); mysql> SET PASSWORD FOR 'root'@'%' = PASSWORD('newpwd'); For Unix, do this: shell> mysql -u root mysql> SET PASSWORD FOR 'root'@'localhost' = PASSWORD('newpwd'); mysql> SET PASSWORD FOR 'root'@'host_name' = PASSWORD('newpwd'); In the second SET PASSWORD statement, replace host_name with the name of the server host. This is the same host name that you used when you assigned the anonymous account passwords. If the user table contains an account with User and Host values of 'root' and '127.0.0.1', use an additional SET PASSWORD statement to set that account's password: mysql> SET PASSWORD FOR 'root'@'127.0.0.1' = PASSWORD('newpwd'); To assign passwords to the root accounts using mysqladmin, execute the following commands: shell> mysqladmin -u root password "newpwd" shell> mysqladmin -u root -h host_name password "newpwd" These commands apply both to Windows and to Unix. In the second command, replace host_name with the name of the server host. The double quotes around the password are not always necessary, but you should use them if the password contains spaces or other characters that are special to your command interpreter. The mysqladmin method of setting the root account passwords does not set the password for the 'root'@'127.0.0.1' account. To do so, use SET PASSWORD as shown earlier. You can also use UPDATE to modify the user table directly. The following UPDATE statement assigns a password to all root accounts: shell> mysql -u root mysql> UPDATE mysql.user SET Password = PASSWORD('newpwd') -> WHERE User = 'root'; mysql> FLUSH PRIVILEGES; The UPDATE statement applies both to Windows and to Unix. After the passwords have been set, you must supply the appropriate password whenever you connect to the server. For example, if you want to use mysqladmin to shut down the server, you can do so using this command: shell> mysqladmin -u root -p shutdown Enter password: (enter root password here) Note If you forget your root password after setting it up, Section B.5.4.1, "How to Reset the Root Password," covers the procedure for resetting it. To set up additional accounts, you can use the GRANT statement. For instructions, see Section 5.5.2, "Adding User Accounts." 2.14. Environment Variables This section lists all the environment variables that are used directly or indirectly by MySQL. Most of these can also be found in other places in this manual. Note that any options on the command line take precedence over values specified in option files and environment variables, and values in option files take precedence over values in environment variables. In many cases, it is preferable to use an option file instead of environment variables to modify the behavior of MySQL. See Section 4.2.3.3, "Using Option Files." Variable Description CXX The name of your C++ compiler (for running configure). CC The name of your C compiler (for running configure). CFLAGS Flags for your C compiler (for running configure). CXXFLAGS Flags for your C++ compiler (for running configure). DBI_USER The default user name for Perl DBI. DBI_TRACE Trace options for Perl DBI. HOME The default path for the mysql history file is $HOME/.mysql_history. LD_RUN_PATH Used to specify the location of libmysqlclient.so. MYSQL_DEBUG Debug trace options when debugging. MYSQL_GROUP_SUFFIX Option group suffix value (like specifying --defaults-group-suffix). MYSQL_HISTFILE The path to the mysql history file. If this variable is set, its value overrides the default for $HOME/.mysql_history. MYSQL_HOME The path to the directory in which the server-specific my.cnf file resides (as of MySQL 5.0.3). MYSQL_HOST The default host name used by the mysql command-line client. MYSQL_PS1 The command prompt to use in the mysql command-line client. MYSQL_PWD The default password when connecting to mysqld. Note that using this is insecure. See Section 5.3.2.2, "End-User Guidelines for Password Security." MYSQL_TCP_PORT The default TCP/IP port number. MYSQL_UNIX_PORT The default Unix socket file name; used for connections to localhost. PATH Used by the shell to find MySQL programs. TMPDIR The directory where temporary files are created. TZ This should be set to your local time zone. See Section B.5.4.6, "Time Zone Problems." UMASK The user-file creation mode when creating files. See note following table. UMASK_DIR The user-directory creation mode when creating directories. See note following table. USER The default user name on Windows and NetWare used when connecting to mysqld. The UMASK and UMASK_DIR variables, despite their names, are used as modes, not masks: * If UMASK is set, mysqld uses ($UMASK | 0600) as the mode for file creation, so that newly created files have a mode in the range from 0600 to 0666 (all values octal). * If UMASK_DIR is set, mysqld uses ($UMASK_DIR | 0700) as the base mode for directory creation, which then is AND-ed with ~(~$UMASK & 0666), so that newly created directories have a mode in the range from 0700 to 0777 (all values octal). The AND operation may remove read and write permissions from the directory mode, but not execute permissions. MySQL assumes that the value for UMASK or UMASK_DIR is in octal if it starts with a zero. 2.15. Perl Installation Notes Perl support for MySQL is provided by means of the DBI/DBD client interface. The interface requires Perl 5.6.0, and 5.6.1 or later is preferred. DBI does not work if you have an older version of Perl. If you want to use transactions with Perl DBI, you need to have DBD::mysql 2.0900. If you are using the MySQL 4.1 or newer client library, you must use DBD::mysql 2.9003 or newer. Support for server-side prepared statements requires DBD::mysql 3.0009 or newer. Perl support is not included with MySQL distributions. You can obtain the necessary modules from http://search.cpan.org for Unix, or by using the ActiveState ppm program on Windows. The following sections describe how to do this. Perl support for MySQL must be installed if you want to run the MySQL benchmark scripts; see Section 7.1.3, "The MySQL Benchmark Suite." It is also required for the MySQL Cluster ndb_size.pl utility; see Section 17.4.21, "ndb_size.pl --- NDBCLUSTER Size Requirement Estimator." 2.15.1. Installing Perl on Unix MySQL Perl support requires that you have installed MySQL client programming support (libraries and header files). Most installation methods install the necessary files. However, if you installed MySQL from RPM files on Linux, be sure that you've installed the developer RPM. The client programs are in the client RPM, but client programming support is in the developer RPM. If you want to install Perl support, the files you need can be obtained from the CPAN (Comprehensive Perl Archive Network) at http://search.cpan.org. The easiest way to install Perl modules on Unix is to use the CPAN module. For example: shell> perl -MCPAN -e shell cpan> install DBI cpan> install DBD::mysql The DBD::mysql installation runs a number of tests. These tests attempt to connect to the local MySQL server using the default user name and password. (The default user name is your login name on Unix, and ODBC on Windows. The default password is "no password.") If you cannot connect to the server with those values (for example, if your account has a password), the tests fail. You can use force install DBD::mysql to ignore the failed tests. DBI requires the Data::Dumper module. It may be installed; if not, you should install it before installing DBI. It is also possible to download the module distributions in the form of compressed tar archives and build the modules manually. For example, to unpack and build a DBI distribution, use a procedure such as this: 1. Unpack the distribution into the current directory: shell> gunzip < DBI-VERSION.tar.gz | tar xvf - This command creates a directory named DBI-VERSION. 2. Change location into the top-level directory of the unpacked distribution: shell> cd DBI-VERSION 3. Build the distribution and compile everything: shell> perl Makefile.PL shell> make shell> make test shell> make install The make test command is important because it verifies that the module is working. Note that when you run that command during the DBD::mysql installation to exercise the interface code, the MySQL server must be running or the test fails. It is a good idea to rebuild and reinstall the DBD::mysql distribution whenever you install a new release of MySQL, particularly if you notice symptoms such as that all your DBI scripts fail after you upgrade MySQL. If you do not have access rights to install Perl modules in the system directory or if you want to install local Perl modules, the following reference may be useful: http://servers.digitaldaze.com/extensions/perl/modules.html#module s Look under the heading "Installing New Modules that Require Locally Installed Modules." 2.15.2. Installing ActiveState Perl on Windows On Windows, you should do the following to install the MySQL DBD module with ActiveState Perl: 1. Get ActiveState Perl from http://www.activestate.com/Products/ActivePerl/ and install it. 2. Open a console window (a "DOS window"). 3. If necessary, set the HTTP_proxy variable. For example, you might try a setting like this: set HTTP_proxy=my.proxy.com:3128 4. Start the PPM program: C:\> C:\perl\bin\ppm.pl 5. If you have not previously done so, install DBI: ppm> install DBI 6. If this succeeds, run the following command: ppm> install DBD-mysql This procedure should work with ActiveState Perl 5.6 or newer. If you cannot get the procedure to work, you should install the MyODBC driver instead and connect to the MySQL server through ODBC: use DBI; $dbh= DBI->connect("DBI:ODBC:$dsn",$user,$password) || die "Got error $DBI::errstr when connecting to $dsn\n"; 2.15.3. Problems Using the Perl DBI/DBD Interface If Perl reports that it cannot find the ../mysql/mysql.so module, the problem is probably that Perl cannot locate the libmysqlclient.so shared library. You should be able to fix this problem by one of the following methods: * Compile the DBD::mysql distribution with perl Makefile.PL -static -config rather than perl Makefile.PL. * Copy libmysqlclient.so to the directory where your other shared libraries are located (probably /usr/lib or /lib). * Modify the -L options used to compile DBD::mysql to reflect the actual location of libmysqlclient.so. * On Linux, you can add the path name of the directory where libmysqlclient.so is located to the /etc/ld.so.conf file. * Add the path name of the directory where libmysqlclient.so is located to the LD_RUN_PATH environment variable. Some systems use LD_LIBRARY_PATH instead. Note that you may also need to modify the -L options if there are other libraries that the linker fails to find. For example, if the linker cannot find libc because it is in /lib and the link command specifies -L/usr/lib, change the -L option to -L/lib or add -L/lib to the existing link command. If you get the following errors from DBD::mysql, you are probably using gcc (or using an old binary compiled with gcc): /usr/bin/perl: can't resolve symbol '__moddi3' /usr/bin/perl: can't resolve symbol '__divdi3' Add -L/usr/lib/gcc-lib/... -lgcc to the link command when the mysql.so library gets built (check the output from make for mysql.so when you compile the Perl client). The -L option should specify the path name of the directory where libgcc.a is located on your system. Another cause of this problem may be that Perl and MySQL are not both compiled with gcc. In this case, you can solve the mismatch by compiling both with gcc. You may see the following error from DBD::mysql when you run the tests: t/00base............install_driver(mysql) failed: Can't load '../blib/arch/auto/DBD/mysql/mysql.so' for module DBD::mys ql: ../blib/arch/auto/DBD/mysql/mysql.so: undefined symbol: uncompress at /usr/lib/perl5/5.00503/i586-linux/DynaLoader.pm line 16 9. This means that you need to include the -lz compression library on the link line. That can be done by changing the following line in the file lib/DBD/mysql/Install.pm: $sysliblist .= " -lm"; Change that line to: $sysliblist .= " -lm -lz"; After this, you must run make realclean and then proceed with the installation from the beginning. If you want to install DBI on SCO, you have to edit the Makefile in DBI-xxx and each subdirectory. Note that the following assumes gcc 2.95.2 or newer: OLD: NEW: CC = cc CC = gcc CCCDLFLAGS = -KPIC -W1,-Bexport CCCDLFLAGS = -fpic CCDLFLAGS = -wl,-Bexport CCDLFLAGS = LD = ld LD = gcc -G -fpic LDDLFLAGS = -G -L/usr/local/lib LDDLFLAGS = -L/usr/local/lib LDFLAGS = -belf -L/usr/local/lib LDFLAGS = -L/usr/local/lib LD = ld LD = gcc -G -fpic OPTIMISE = -Od OPTIMISE = -O1 OLD: CCCFLAGS = -belf -dy -w0 -U M_XENIX -DPERL_SCO5 -I/usr/local/include NEW: CCFLAGS = -U M_XENIX -DPERL_SCO5 -I/usr/local/include These changes are necessary because the Perl dynaloader does not load the DBI modules if they were compiled with icc or cc. If you want to use the Perl module on a system that does not support dynamic linking (such as SCO), you can generate a static version of Perl that includes DBI and DBD::mysql. The way this works is that you generate a version of Perl with the DBI code linked in and install it on top of your current Perl. Then you use that to build a version of Perl that additionally has the DBD code linked in, and install that. On SCO, you must have the following environment variables set: LD_LIBRARY_PATH=/lib:/usr/lib:/usr/local/lib:/usr/progressive/lib Or: LD_LIBRARY_PATH=/usr/lib:/lib:/usr/local/lib:/usr/ccs/lib:\ /usr/progressive/lib:/usr/skunk/lib LIBPATH=/usr/lib:/lib:/usr/local/lib:/usr/ccs/lib:\ /usr/progressive/lib:/usr/skunk/lib MANPATH=scohelp:/usr/man:/usr/local1/man:/usr/local/man:\ /usr/skunk/man: First, create a Perl that includes a statically linked DBI module by running these commands in the directory where your DBI distribution is located: shell> perl Makefile.PL -static -config shell> make shell> make install shell> make perl Then you must install the new Perl. The output of make perl indicates the exact make command you need to execute to perform the installation. On SCO, this is make -f Makefile.aperl inst_perl MAP_TARGET=perl. Next, use the just-created Perl to create another Perl that also includes a statically linked DBD::mysql by running these commands in the directory where your DBD::mysql distribution is located: shell> perl Makefile.PL -static -config shell> make shell> make install shell> make perl Finally, you should install this new Perl. Again, the output of make perl indicates the command to use.