lm_sensors CHANGES file ----------------------- This is a list of the most important changes in 2.x versions. It is by no means complete, listing only the most significant changes. The ultimate way to know what has changed is to run diff, or even neater, ask CVS about it: * Checkout the archive (see doc/cvs for how you can do this) * Determine which tags are valid, by running this command from the project root directory: cvs status -v -l Makefile Valid tags are usually of the form V2-1-0 for version 2.1.0 * Ask cvs for the difference between two versions: cvs diff -r TAG1 -r TAG2 DIFF-OPTIONS for example: cvs diff -r V2-0-0 -r V2-0-1 -u ----------------------------------------------------------------------------- 2.8.2 (???) IMPORTANT: Limit initialization removed from all chip drivers! If you didn't run 'sensors -s' in the past you may need to now! File sensors.conf.eg: Change lm75 scaling back to 1; Add example for asb100 Library: Fix bmcsensors scaling, increase number of sensors; Add w83627thf support; Advance version to 3.0.0; Add hermes, ADM1032, ASB100 support; Add it87 sensor type support; Add sysfs support for kernel 2.6; Fix memory leaks Makefiles: Install fancontrol, pwmconfig, decode-*.pl; Fail if no kernel .config file exists; Don't build module dependencies for user and user_install Modules adm1021, adm1024, adm1025, adm9240, ds1621, gl518sm, gl520sm, it87, lm75, lm78, lm80, lm83, lm87, lm90, mtp008, sis5595, smsc47m1, thmc50, via686a, w83627hf, w83781d: Remove initialization of limits by driver. Modules it87, lm78, mtp008, sis5595, w83627hf: Fix IN_FROM_REG rounding Modules (chip): Init cleanups Module asb100: New Module bmcsensors: Fix voltage scaling, voltage and fan limits Modules ddcmon, eeprom: Add failure printks Module fscher: New (Fujitsu-Siemens Hermes driver) Module i2c-amd756: Fix AMD8111 support Module i2c-amd8111: Fix byte writes Module i2c-nforce2: Fix byte writes Module i2c-piix4: Add support for CSB6; add fix_hstcfg option Module i2c-sis630: Sync with 2.6.0-X driver version Module i2c-viapro: Add support for Via 8237 Module it87: Add pwm and "smart guardian" support; add it87 sensor type support Module lm90: Add ADM1032 support Module w83781d: Fix 791d and 627hf detection Program dmidecode: Remove (sensors-detect doesn't need it anymore) Program eeprog: New Programs i2cdetect, i2cdump, i2cset: add -v (version) option; support sysfs for i2c bus search Program i2cdetect: Add -l option to list busses Program i2cdump: Add 'c' mode for consective address reads Program mkpatch: Cleanups Program pwmconfig: Handle multiple fans controlled by a single pwm Program sensord: Remove ddcmon support Program sensors: Add ADM1032 support; add messages for sysfs Program sensors-detect: Prefer Super I/O drivers; Fix W83627HF and W83791D detection; detect CSB6; Detect ADM1029, ADM1030, ADM1031; Detect W83637HF, W83697UF; Add it87 sensor type support; add sysfs support Reduce lm80 misdetects; remove PCFxxxx "detection" Detect VT8237 (KT600) Use VPD instead of DMI+ACPI for Thinkpad detection Suggest new asb100 driver instead of w83781d 2.8.1 (20031005) NOTE: Requires i2c-2.8.1 or newer! File sensors.conf.eg: Improved adm1025 section Default temp labels for as99127f Improved lm83 section Better support for Asus A7V8X-X File doc/chips/SUMMARY: Add SMSC manufacturer ID File doc/chips/adm1025: Add decent documentation (almost new) File doc/chips/lm83: Known motherboards list update, misc updates Library: Change adm1025 names (hyst/over become low/high) Swap adm1025 temp1 and temp2 to match the driver's order Advance version to 2.0.1 Update lm83 support Add support for lm90, xeontemp, max6650 Add separate messages for read and write errors Add missing message for parse error Makefile: Move LINUX_HEADERS from ALL_CPPFLAGS to MODCPPFLAGS Modules (various): Fix includes for compilation on Alpha Use the new i2c_delay function instead of the various do_pause functions Module i2c-ali15x3: Fix resource leak (Daniele Bellucci) Module i2c-nforce2: Cleanups Module i2c-i810: Use readl/writel for portable access to PCI memory Module i2c-piix4: Force CPCI735 bug workaround (Tom Rini) Module i2c-savage4: Use readl/writel for portable access to PCI memory Module i2c-sis630: Fix detection Add block data read/write support Module i2c-sis645: Detection method change/bugfix Module i2c-viapro: Prevent buffer overrun (Sergey Vlasov) Module i2c-voodoo3: Use readl/writel for portable access to PCI memory Module adm1025: Major driver update Add support for Philips NE1619 Simplify the driver a lot (unified voltages, unified temperatures and much more) Fix default voltage limits Change default temperature limits Swap remote and local temperatures to match the internal registers order (make the code unification possible) Export remote diode fault through alarms Module ddcmon: Major update Add half a dozen new features Add checksum parameter (same as for the eeprom module) Fix monitor limits Module eeprom: Ignore Sony Vaio EEPROMs with a password set Module lm78: Fix a fan_div/fan_min bug Module lm83: Add t_crit and alarms support Module lm90: New Module max6650: New Module saa1064: New Module smsc47m1: Add support for 47M142 Module w83627hf: Fix 697HF PWM; fix 697HF VBAT and V5SB alarms; enhance w83627thf support Module w83781d: Enhance chip detection; clean up error returns; fix 697HF and 791D PWM; fix 697HF VBAT and V5SB alarms Module xeontemp: New Program decode-dimms.pl: Add Direct Rambus (DRDRAM) Mark Rambus as unsupported Program decode-edid.pl: New Interfaces between our eeprom module and parse-edid from the read-edid project Program p4b_smbus: Fix SMP compilation Program sensord: Add support for IT87 (Mike Black) Change ADM1025 support to match the changes made to the library Program sensors: Rewrite and enhance EEPROM support Change LM83 and ADM1025 support to match the changes made to the library Add DRDRAM support to print_eeprom Exit(1) on /proc write failure (Malte Starostik) Add LM90, MAX6650 support Program sensors-detect: Add support for PCF8574, PCF8574A, SAA1064 Add support for LM82, LM86, LM89 Improved W83781D family detection Add support for AS19927F rev.2, ASB100 Bach Add support for Asus Mozart-2 (3 types) Add support for NE1619 Add support for FSC Hermes Make sure /sbin is in the user's path Fix EEPROM detection Automatic module.conf and /dev/i2c* detection Improve LM82 and LM83 detection Handle "to-be-written" cleanly Add detection for 47M14x Super I/O Handle the one-address-many-chips-same-driver case 2.8.0 (20030714) NOTE: Requires i2c-2.8.0 or newer!!! Dropped all kernel 2.2 and 2.3 compatibility; 2.4.9 or later required; 2.4.13 or later required for mkpatch. File i2c-dev.h: Include userspace portion removed from i2c-dev.h in i2c package File doc/chips/fscscy: Add watchdog documentation File sensors.conf.eg: Fix vt1211/vt8231 thermistor calculations File sensors.h: Now automatically generated Library: Add support for exponents and logarithms for vt1211/vt8235 temps; add adm1026, lm83, lm85, w83791d support; Advance version to 2.0.0 Makefiles: Generate warnings if new library won't be found by ld.so; Modules now install in kernel/drivers/i2c/[busses,chips]; Ensure that headers in /usr/local/include are used first; Don't use /usr/include headers for modules; Handle multiple UTS_RELEASE definitions in linux/version.h; Automatically generate kernel/include/sensors.h; Remove old gzipped modules; remove old misc directory if empty; Remove pre-2.4 installation method; -Wall now the default; Add new targets user, user_install, and help; Run depmod after module installation Modules (all): Cleanups including - Add #include - C99 initializers - Remove #ifdef MODULE - Remove #ifndef THIS_MODULE - Remove #ifndef MODULE_LICENSE - Remove other 2.1/2.2 #ifdefs - Remove #include "sensors.h", copy SYSCTL defs to module - Remove excess #includes - Remove argument in i2c_register_entry() - Remove dummy xxx_command() definition - Remove EXPORT_NO_SYMBOLS - Remove init_MUTEX #define - Remove xxx_inc_use() and xxx_dec_use() functions; modules no longer adjust their own refcounts - Use module_init() and module_exit() - Update to new i2c_driver struct definition Modules (bus PCI): Convert to PCI-module-style initialization Modules (several): Add support for AMD Opteron VRM (VID) encoding Module adm1021: Set alarm on failed reads and report old value; merge changes from kernel 2.5.54 Module adm1026: New Module bmcsensors: Fix compile when DEBUG=1 Modules ddcmon, eeprom: Use i2c block reads if possible; better error handling Module ds1307: Add to Makefile Module gl520sm: Fix temperature over/hyst writes Module lm75: merge changes from kernel 2.5.54 Module lm83: New Module lm85: New Module i2c-ali1535: Check for invalid transaction Module i2c-ali15x3: Check for invalid transaction Module i2c-amd756: merge changes from kernel 2.5.54; check for invalid transaction Module i2c-amd8111: merge changes from kernel 2.5.54 Module i2c-i801: Add support for 82801EB (ICH5) Module i2c-i810: Fix for some chips Module i2c-nforce2: New Module i2c-piix4: Check for invalid transaction Module i2c-sis5595: Check for invalid transaction; add more blacklist IDs Module i2c-sis645: Add support for SiS648, SiS651, SiS745, and SiS746 north bridges; SiS962 and SiS963 south bridges Module i2c-viapro: Check for invalid transaction Modules mtp008, smsc47m1, vt1211, vt8231, w83781d: Standardize and improve pwm and pwm enable support; update docs Module smbus-arp: Check adapter for HW or SW PEC support; add reset option Module w83781d: Add support for w83791d Module w83627hf: New Program decode-dimms.pl: Recognize DDR and Rambus Program eeprom: Fix writes for small eeproms Program eeprom, eepromer: Use local i2c-dev.h for build Program fancontrol: New Program lm_sensors.init: Call sensors -s in start() Program mkpatch: Fix vt8231 compile; keep tsunami from menu on non-alpha; Add adm1026,lm85 support; Remove sensors.c file; add sensors_compat.h; Remove patches to i2c-core.c and drivers/char/mem.c; Now works only for kernels 2.4.13 or later Program p4b_smbus: Fix 'make install'; Install in same place as other modules; Clear correct bits in config word Program pwmconfig: New Program sensors: add adm1026, lm85, w83791d support Program sensors-detect: Add super i/o detection (smsc47m1, vt1211, w83627hf, w83627thf, w83697hf); Add support for SiS651, SiS961, SiS745, SiS746; Support dmidecode 2.0 and later; Fix "C" format error; Add support for adm1026, 82801EB (ICH5), W83791D; Add support for w83l785ts, nForce2; Fix UTF-8 incompatibility; Better support for lm75; Add support for lm83 2.7.0 (20021208) NOTE: Requires i2c-2.7.0 or newer. File doc/busses/i2c-ali1535: Add license, miscellaneous changes File doc/busses/i2c-ali15x3: Add license, miscellaneous changes File doc/busses/i2c-sis645: Add license File doc/chips/lm92: Add license, features File doc/chips/maxilife: Add license, parameters, features File doc/chips/smartbatt: Complete rewrite File doc/chips/vt8231: Add license, parameters File sensors.conf.eg: Add section for lm75; complete the lm78 section Library: Add support for MC1066; add multiple VRM version support for lm87; enhance adm1023 support; initial support for Sony Vaio eeprom; add support for bmcsensors; add hacks for additional dummy drivers Makefile: Take kernel source location from /lib/modules/x.x.x/build; add flags for x86_64 compiles Module adm1021: Add support for MC1066 Module bmcsensors: New Module dmi_scan: Rename symbol duplicated in kernel; apply fixes from kernel 2.5.43; fix 2.2 kernel compiles Module gl518sm: Iterate allowed only for rev 0x00 Module i2c-amd756: Configure base address for nForce support; check for uninitialized base address; add support for amd8111 (SMBus 1.0) Module i2c-amd8111: New (SMBus 2.0) Module i2c-ipmb: New Module i2c-ipmi: New Module i2c-keywest: Sync with kernel 2.4.20 Module i2c-sis630: Add support for SiS730 Module i2c-sis645: Improve support for SiS645/961; add support for SiS645DX/961 and SiS735; fix 2.2 kernel compiles Module i2c-viapro: Add support for VT8233A (new ID 0x3177) and VT8235 Module lm87: Add multiple VRM version support Module vt1211: Fix inx limits and alarms; fix in0 Module vt8231: Fix inx limits and alarms; fix in0 Module w83781d: Fix in0/in1 initialization Module smartbatt: New Modules (several): Remove #ifndefs, require i2c-2.7.0; HZ fixes Program decode-dimms.pl: Code cleanup; valid HTML; better HTML output; stop decoding on checksum error Program dmidecode: Fix read bug; upgrade to version 1.8 Program doc-insmod: Complete rewrite; fix author output Program doc-features: Complete rewrite; handle missing sysctl entries; handle unknown prefix with suggestion Program lm_sensors.init: Remove spaces bug; add green/red output Program mkpatch: Fix dmi_scan module compile; add sis630, sis645, amd8111 Program rrd: Add sanity limits to newly-created RRD. Program sensord: (v0.6.2) Add sanity limits to newly-created RRD. Program sensors: Add support for MC1066, Rambus Rimms; fix w83781d temp3 alarm; fix gl518sm rev 0x00 recognition; initial support for Sony Vaio eeprom Program sensors-detect: Add support for MC1066, smart battery, 8235, IPMI, AMD8111; add help if no sensors found; add ACPI method for IBM system detection; work with old Perl versions again; initial support for Sony Vaio eeprom 2.6.5 (20020915) NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer. File sensors.conf.eg: Fix temp[23] for as99127f; add vt8231 Library: Fix fan3_div writes for w8378* and it87; add vt8231 Module dmi_scan: new Module ds1621: Fix enable/disable Module eeprom: Do not corrupt 24RF08's when checksum=1 Module i2c-i801: Check for uninitialized base address; enable if not enabled Module i2c-piix4: Refuse to load on IBM systems to prevent 24RF08 corruption Module i2c-sis630: new Module i2c-sis645: new Module lm92: Fix in-kernel initialization Module via686a: Remove VT8231 support Module vt8231: new Module w83781: recognize Asus "ASB100 Bach" as AS99127F Program dmidecode: new Programs i2cdetect, i2cdump, i2cset, isadump: Now installed by 'make install' Program mkpatch: Add Config.in entries for, lm92, pcf8574, pcf8591, smsc47m1, vt1211; add dmi_scan Program p4b_smbus: Fix compile for SMP and MODVERSIONS; fix PCI ID problem Program lm_sensors.init: fix stop() Program sensord: (v0.6.1) Add /usr/local/etc to config file path; add support for logging loadavg in RRD; fix down-converting raw labels for RRD; update chip support, still behind sensors Program sensors: Add /usr/local/etc to config file path; fix -c and -u flags; add vt8231 Program sensors-detect: recognize Asus "ASB100 Bach" as AS99127F; refuse to run on IBM systems; fix sysconfig module numbering; change quick write to not corrupt 24RF08's 2.6.4 (20020719) NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer. File doc/vid: New File include/sensors_vid.h: New File sensors.conf.eg: Add vt1211, smsc47m1 Library: Add multiple VRM version support for adm1025, w83781d; fix 'flex scanner jammed' on some systems; add vt1211, smsc47m1, lm92; fix access mode checking Makefiles: For 2.4+ kernels, modules now install in kernel/drivers/[i2c,sensors] , not misc/ , and 'make install' removes old versions in misc/ . Use $CFLAGS and $CPPFLAGS if defined. Module adm1025: Add multiple VID version support Module ds1307: new Module i2c-amd756: Add nVidia nForce support; fix block read length; reliability improvements Module i2c-hydra: Flush posted writes Module i2c-i801: Add support for 82801DB (ICH4) Module i2c-i810: Flush posted writes Module i2c-savage4: new Module i2c-viapro: Add support for VT8231 (0x8235), VT8233A (0x3147) Module i2c-voodoo3: Flush posted writes Module ds1307: New Module lm92: New Module smbus-arp: new Module smsc47m1: new Module via686a: Add support for VT8231 sensors Module vt1211: new Module w83781d: Add multiple VID version support; fix temp alarms Program eeprom: new Program i2cdump: Add smbus block command specification, add PEC support Program lm_sensors.init: new Program mkpatch: Add sensors_vid.h, i2c-savage4, lm92, pcf8574, pcf8591, smsc47m1, vt1211 Program p4b_smbus: Add support for ICH4 Program rrd: Fix swapped CPU and MB temps in summ_week.cgi Program sensord.init: Renamed, was prog/init/sensors Program sensord: Major update, now requires rrd source; not compiled by default Program sensors: Recognize DDR SDRAM; add adm1025 VID; add -A (don't display algo. and adap.) option; add vt1211, smsc47m1, lm92 Program sensors-detect: Add VT8231, VT8233A, several S3 devices; add 82801DB, LM85; fix perl warnings; generate /etc/sysconfig/lm_sensors for lm_sensors.init script 2.6.3 (20020322) NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer. Chip modules (most): Allow THIS_MODULE definition for kernels 2.2.18+ File doc/chips/it87: add more temp_type help File sensors.conf.eg: Un-ignore it87 in8, temp3, fan3; add adm1021 section; add lm87 AIN[1,2] template; swap negative voltage limits for 782d,783s,627hf, 697hf,it87; add more it87 help; swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f Library: Add PCF8591, W83697HF, ADM1023 support; fix w83* fan_min computes; swap neg. voltage limits for lm78(-j), lm79, w83781d, as99127f Module adm1024: Add MODULE_LICENSE("GPL") Module bt869: Add s-video out and DVD resolution support Module eeprom: Add support for locations 128-255; rename /proc entries in hex Module fscscy: implement min/max for voltages and fans Module i2c-amd756: Add support for AMD768 Module i2c-i810: Add support for 810E Module i2c-keywest: Big update, sync with kernel 2.4.18 Module i2c-piix4: Check for uninitialized base address Module i2c-sis5595: Blacklist 645, 735 Module i2c-viapro: Check for uninitialized base address Module gl518sm: Standardize /proc entries in0-3 Module lm87: Fix in0, in1, in5 initial limits; ain[1,2] -> in[6,7]; fan -> fan1; fix temp2 limit writes Module pcf8574: Add support for PCF8574A; /proc interface changed Module pcf8591: new Module sis5595: Blacklist 645, 735 Module w83781d: Add W83697HF support; allow force_subclients parameter for Tyan 2460 Programs decode-dimms.pl, decode-xeon.pl: Update for new /proc names Program decode-vaio.pl: new Program i2cdump: Add i2c block read capability (requires i2c-2.6.3); add text output Program init/sensors: New SysV init script Program mkpatch.pl: Add support for fscscy, add more help entries Program p4b_smbus: new Program rrd: Install summ_week.cgi Program sensors: Add PCF8591, W83697HF, ADM1023 support, clean up chassis intrusion prints Program sensors-detect: Add several Nvidia chips, add PCF8591, add 810E; fix Via686a and it87 detection; add AMD768, IPMI-BMC-KCS and -SMIC; add Via 8231; fix uninitialized values; it87 beats lm78 2.6.2 (20011118) NOTE: Requires i2c-2.6.1 or newer, or kernel 2.4.13 or newer. Chip Modules (all): malloc.h -> slab.h Modules (all): Add MODULE_LICENSE("GPL") File doc/FAQ: More updates and additions File sensors.conf.eg: Fix it87 in5,in6 (-12,-5) calculations Library: Add fscpos and fscscy support, fix gl520 in4 ID, update it87 alarm ID's. Module fscpos: new (Fujitsu-Siemens Poseidon driver) Module fscscy: new (Fujitsu-Siemens Scylla driver) Module i2c-amd756: Improve busy handling/printk's Module i2c-i801: Add 82801CA/CAM support Module i2c-keywest: Sync with PPC people, it works now Module i2c-piix4: Add Intel 82443MX and SMSC Victory66 support Module i2c-viapro: Add Via VT8233 support Module it87: Merge alarm_* /proc entries to alarms Module sis5595: Fix support for rev B0 Module via686a: Make limit initializations reliable Module w83781d: Allow init=0 parameter to bypass initialization Program isadump: Add flat address space (PCI) support Program mkpatch.pl: Add support for i2c-ali1535, adm1024, ds1621, fscpos, it87, maxilife, mtp008 Program sensors: Fix w83781d temp precision Program sensors-detect: Add ALI1535, Via VT8233, it87 (i2c), Fujitsu Poseidon and Scylla, Intel 82443MX and 82801CA/CAM detection, add ITE 8172G detection (driver in kernel 2.4.10) 2.6.1 (20010830) File BUGS: Updated File doc/FAQ: More updates and additions File doc/chips/adm1021: Claim support for Philips NE1617, NE1617A File sensors.conf.eg: Fix/enhance it87 section Library: ds1621 and it87 updates Module i2c-ali15x3: Allow force_addr=0xaddr; enable if not enabled. Module i2c-amd756: Add AMD 766 support Module i2c-i801: Fix 82801BA detection broken by kernel 2.4.6 Module i2c-piix4: Add Serverworks CSB5 support Module i2c-sis5595: Recognize unsupported chips and refuse to load Module adm1025: Fixed temp2 min/max writes Module ds1621: Add 12-bit precision mode Module it87: Enable all alarms, add in8 support, add sensor type selection Module sensors: Don't initialize i2c-proc (moved to i2c-core); remove support for module Module sis5595: Recognize unsupported chips and refuse to load Module w83781d: Fix fan speed for as99127f (broken by 2.6.0) Program eepromer: new Program mkpatch.pl: Fix dependencies on i2c-proc; disallow compilation of sensors.c as a module in kernel Program sensors: it87 updates; adjust temp. precision for some chips Program sensors-detect: Fix ADM1024 and ADM1025 detection; recognize unsupported SiS chips; recognize AMD 766 and Serverworks CSB5. 2.6.0 (20010612) NOTE: i2c-2.6.0 MUST BE be compiled AND installed first!!! If your make fails because it can't find , you forgot this step!!! File doc/FAQ: Many, many updates and additions File doc/busses/i2c-sis5595: new File doc/busses/i2c-tsunami: new File doc/chips/it87: new File doc/chips/via686a: Claim support for 686b. File README.thinkpad: new File sensors.conf.eg: Adjust as99127f in5 (-12V) and temp2 calculations; Add lm87, adm9240, ds1780, lm81 templates; Enhance help comments in file; Add Tyan S2510 dual-MTP008 example; Make separate sis5595 section. Include file i2c-isa.h: No longer required, moved to i2c.h in i2c package Include file sensors.h: Most contents moved to i2c-proc.h in i2c package Library: Fix/standardize some lm87 and mtp008 entries; add sis5595 in4; Add support for maxilife-nba and amd1024; Change from sensors_* to i2c_* globals for new i2c-proc.[ch] Chip Modules (all ISA): Remove #include "i2c-isa.h" Chip Modules (all): Change from sensors_* to i2c_* globals for new i2c-proc.[ch] Makefiles: enhance to support Alpha architecture Module adm1021: Fix lm84 and gl523sm support Module adm1024: new Module i2c-i801: Chip detection cleanup Module i2c-i810: Fixed i2c_i810_init() not found in patched kernel Module i2c-sis5595: Allow force_addr=0xaddr; enable if not enabled. Module i2c-tsunami: New Module i2c-via: Ensure i2c bus is tristated correctly. Module it87: new driver for IT8705, IT8712, Sis950 chips Module lm78: Recognize chipid=0x20 Module lm87: Fix in0, in1 (2.5V and Vccp1) calculations Module mtp008: Fix temp initializations; Save BIOS pin configuration of temps and fans; Fix sensor type reads/writes and fan min writes; Fix spurious invalid sensor type messages Module sensors: Disabled, moved to i2c package as i2c-proc.c; only used for patched kernel now. Add xxx_init() calls for drivers added to mkpatch in 2.5.5. Module sis5595: Fix temp, add in4 for chip revision 0xc0; Allow force_addr=0xaddr Module via686a: Allow force_addr=0xaddr (for A7V/K7V boards) Module w83781d: Don't reinitialize as99127f chip; this may cause fan/temp reading changes; Add messages for subclient registration failure Programs i2cdetect, i2cdump: add devfs /dev/i2c/x support Program i2cset: new Program isadump: fix for Alpha arch. compiles Program mkpatch.pl: Fix adm9240 typos; Add more chips to Configure.help; Remove ltc1710; Fix i2c_sis5595 typo; Support kernel 2.4.5 makefile change; Add i2c-tsunami; fixed i2c-voodoo3 configuration Program sens_update_rrd: new Program sensord: Add -d (debug) and -p (pid-file) options Program sensors: Change reported version from 1.3 to the lm_sensors version; Fix swapped limit and hysteresis on 9240, 5595, 686a; Change mtp008 temps from max/min to limit/hyst; Add maxilife-nba, adm1024, it87 support. Program sensors-detect: Recognize lm78 with chipid=0x20; Recognize SMSC Victory66 South Bridge; Add devfs /dev/i2c/x support; Add adm1024, it87xx support; Add thinkpad warning. Program tellerstats: new 2.5.5 (20010115) NOTE: i2c-2.5.5 MUST BE be compiled and installed first, UNLESS you have kernel 2.4.0-prerelease or greater. Chip modules (all): Update mutex definition (works now for new 2.2 kernels) File doc/developers/proc: new File sensors.conf.eg: Add mtp008 entries, adm1025 entries Library: Add ds1621, mtp008 support Module adm1021: Add support for adm1021a / adm1023 Modules adm1021, thmc50: Rename /proc entries to temp[1-2] Module adm1025: Add support for remote temp; rename /proc entries to in[0-5] and temp[1-2]; fix negative temp readings Module adm9240: Rename /proc entries to in[0-5] Module ddcmon: allow force and force_ddcmon parameters Module ds1621: new Module i2c-ali1535: Enhance error checking and recovery; add mutex Module i2c-i810: Add "dummy write" before reads per Intel prog. ref. Module i2c-piix4: add support for ServerWorks southbridge OSB4 Module lm87: cleanup, update voltage calculations Module mtp008: new Module pcf8574: change update time to 5 seconds Modules sis5595, i2c-sis5595: Check for uninitialized base addresses Module w83781d: fix beep setting via /proc Programs editticket, readticket: new Program mkpatch.pl: only works with 2.2 and 2.4 kernels; 2.3 support removed Program mkpatch.pl: more fixes; now adds many more modules Program sensors: Add ds1621, mtp008 support; add -f (Fahrenheit) option; add adm1025 temp2; report temp limits correctly as min/max or limit/hysteresis; print message if no sensors are found. Removed false errors from lm87 reads. Program sensors-detect: Add ds1621, mtp008 detection; add ServerWorks detection 2.5.4 (20001012) Module i2c-viapro: Add support for Via 596B (0x3051) Program m7101: moved to CVS tree, updated for 2.4.0 kernels Program mkpatch.pl: fixed infinite loop Program sensors-detect: Detect Via 596B (0x3051) 2.5.3 (20001008) NOTE: i2c 2.5.3 MUST BE be compiled and installed first. File useful_addresses.html: update Library: Add lm87 support Module pcf8574: new Module i2c-ali1535: new Module i2c-ali15x3: removed force #ifdef. Module i2c-i801: support Intel 82801BA (815E chipset) Module i2c-i801: add i2c block write support, fix smbus block bugs (requires i2c 2.5.3 package) Module i2c-i810: support Intel 82815 Module lm87: new Module sensors: Fix for kernel 2.4.0-test8 (remove copy_to_user_ret and put_user_ret) Module w83781d: limit fan divisors to 8 max. for as99127f Program decode-dimms: Add html output option, update for SPD spec 1.2B. Program i2cdump: Add smbus block read support Programs i2cdetect, i2cdump: Improve error reporting Program sensors: new switch -u (--unknown) Program sensors-detect: detect Intel 82801BA (815E chipset) Program sensors-detect: detect Intel 82815 Program sensors-detect: detect ITE IT8705F / IT8712F (no driver yet) Program sensors-detect: detect National LM87 Program sensors-detect: detect nVidia devices supported by i2c-riva.o Program sensors-detect: Improve error reporting 2.5.2 (20000709) File sensors.conf.eg: Fix lm80 in8 calculation Module w83781d: W83783S no longer crashes on unloading Program sensors-detect: more robustness in case of unknown i2c adapters Program sensors-detect, libsensors: fix eeprom size reporting Program sensord: more flexibility, support for alarm scanning etc. Program sensors: support for ignore setting on sensor alarms. Programs: understand /dev/i2c* files (instead of /dev/i2c-*) too. 2.5.1 (20000618) Library: Add adm1025 support Module adm1025: new Module ddcmon: Fixed bus scan which could hang SMBus Module i2c-keywest: new Module maxilife: Add support for Maxilife '99 (NBA) Module via686a: Enable sensors if not enabled by BIOS Module w83781d: Improve w83783s support, w83627hf always has 2 pwm Module w83781d: Fix sensor2&3 selection, enable VBAT (in8) monitoring Module w83781d: Remove as99127f entries for in7-8, pwm3-4, sensor1-3 Module w83781d: Fis as99127f fan speed (was 66% too high) Module w83781d: Improve beep input checking Program i2cdump: Add Winbond-style bank selection Program isadump: Add Winbond-style bank selection Program sensors: Add adm1025 support. Program sensors: Remove some as99127f entries, fix as99127 "(beep)" Program sensors-detect: Fix i801 detection, add adm1025 driver entry File sensors.conf.eg: Add Maxilife '99 entries File sensors.conf.eg: Remove some as99127f entries. Note: For as99127f, reinstall sensors.conf.eg manually (make install won't reinstall it) or else 'sensors -s' will fail. 2.5.0 (20000312) Dropped all kernel 2.0 and 2.1 compatibility Module i2c-i810: new Module ddcmon: new Module via686a: new Module i2c-amd756: fixed region request Module i2c-voodoo3: Converted to use i2c-algo-bit layer Module w83781d: Don't change pin settings at initialization; also fix chip detection. Library: Support for ddcmon and via686a Program sensors-detect: Support for ddcmon and via686a Program sensors: Support for eeprom, ddcmon and via686a 2.4.5 (20000116) Introduced DESTDIR installation prefix Module lm80: fixes, temperature now read and set correctly Module i2c-voodoo3: driver enhancements Module w83781d: fixes, AS99127 works much better now Library: New ignore keyword in config file Programs: Support for new ignore keyword Program sensors-detect: Support for MGA detections 2.4.4 (19991201) Addition of the alpha release of AMD 756 SMBus host support. Many fixes and updates to the gl518sm driver Updates and fixes for device detection 2.4.0 (19990920) Too much to list. i2c and smbus parts are split off to a separate i2c package. New drivers and other stuff. 2.3.4 (19990616) Module matorb: driver for Matrix-Orbital Displays (small LCD and VFDs) All: Now compiles against kernel 2.0.x (again ;) Module gl518sm: some updates and refinements 2.3.3 (19990603) All: Now compiles against kernel 2.3.x (x >= 1) Module i2c-voodoo3: Timing issue fixes Module bt869: Seems to be functional and relatively well tested Many modules were modified to be more compatible with the new Mutex structure in the new experimental kernels. 2.3.2 (19990507) Module i2c-hydra: Now compiles on 2.0.x kernels Module i2c-lm75: Slightly better detection * New, but not compiled by default: Module i2c-voodoo3: beginning of Voodoo3 I2C bus driver Module bt869: Beginning of BT869 (PAL/NTSC video converter) driver 2.3.1 (19990501) All: Now compiles on PPC Module i2c-hydra: NEW Module i2c-proc: Buffer overflow removed: `less /proc/bus-i2c-0' now works Module w83781d: Removed deadlock (mutex was not initialized) Documentation: A few glitches removed Makefile: default module installation directory is now /lib/modules/current/extra/misc Program sensors-detect: PPC Hydra now detected Program sensors: Now prints complete GL518SM information Program sensors: SIS5595, ADM1021, MAX1617(A), ADM9240, DS1780 added 2.3.0 (19990422) All: Many, many changes and improvements All: Many small bugs and problems removed Modules: New insmod parameters Modules: Much improved chip detection Module maxilife: NEW Module adm1021: MAX1617A now also supported Module adm9240: DS1780 now also supported Module w83781d: W83782D and W83783S now also supported Program sensors-detect: NEW Library: All chips now supported Documentation: Very much improved 2.2.2 (199903??) Just some minor updates and bug fixes. 2.2.1 (19990218) All: Removed compile warnings Module i2c-dev: Small bug removed if DEBUG=1 was used Module sis5595: Now compiles for 2.0 kernels Module adm1021: Detection corrected 2.2.0 (19990216) All: Set copyrights to include 1999 All: Small bugfixes I2C: Upgraded to newest archive of Simon Vogl Module i2c-dev: NEW Module i2c-ali15x3: NEW Module i2c-via: This is old module bit-mb, now moved to the main lm_sensors directories, and somewhat improved Module sis5595: NEW Modules: Renamed all bus modules to i2c-*, new directory lay-out Library: Support for new chip drivers, several small bugs fixed Library manual pages: NEW Program i2cdetect: Moved to detect directory Program detect.pl: NEW Program doc-features: NEW Program sensors: Added man-page Document BUGS: Added cdrom bug and kernel i2c conflict 2.1.2 (19990116) Modules lm80.o, w83781d.o: fan-related Segmentation fault corrected Module gl518sm.o: yet more bug fixes. It should at long last be usable now Documentation in doc/kernel: NEW 2.1.1 (19990107) Module i2c-proc.o: Hack to make /proc/bus/ possible for kernels 2.0.35 and older Module gl518sm.o: Miscelaneous bugs and problems solved Program isadump: NEW 2.1.0 (19981230) Library: Completely NEW Program sensors: NEW Program grab_busses: NEW Program decode-dimms: More information Module bit-mb.o: Removed spurious semicolon; now runs on more VIA chipsets Module w83781d.o: NEW Module lm80.o: NEW Module gl518sm.o: new procfile beep, several small updates Modules: Now use pin readings, no more scaling within the kernel (use the library instead) 2.0.2 (19981214) Module eeprom.o: NEW Program decode-dimms: NEW Modules: fill_inode fix, will stop segfaults on unloading in kernels after 2.1.58 Modules: Somewhat less verbose on transfers Module lm78.o now recognizes and handles lm78-j and lm79 2.0.1 (1998121?) Module gl518sm.o updates, to make it actually work Module lm75.o high/low-byte swapping write bug fixed 2.0.0 (19981209) Initial release