/* * Copyright (c) 2010 Broadcom Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef _wlioctl_h_ #define _wlioctl_h_ #include #ifdef BRCM_FULLMAC #include #endif #include #include #include #ifndef INTF_NAME_SIZ #define INTF_NAME_SIZ 16 #endif #ifdef BRCM_FULLMAC #define WL_BSS_INFO_VERSION 108 /* current ver of wl_bss_info struct */ /* BSS info structure * Applications MUST CHECK ie_offset field and length field to access IEs and * next bss_info structure in a vector (in wl_scan_results_t) */ typedef struct wl_bss_info { u32 version; /* version field */ u32 length; /* byte length of data in this record, * starting at version and including IEs */ u8 BSSID[ETH_ALEN]; u16 beacon_period; /* units are Kusec */ u16 capability; /* Capability information */ u8 SSID_len; u8 SSID[32]; struct { uint count; /* # rates in this set */ u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ } rateset; /* supported rates */ chanspec_t chanspec; /* chanspec for bss */ u16 atim_window; /* units are Kusec */ u8 dtim_period; /* DTIM period */ s16 RSSI; /* receive signal strength (in dBm) */ s8 phy_noise; /* noise (in dBm) */ u8 n_cap; /* BSS is 802.11N Capable */ u32 nbss_cap; /* 802.11N BSS Capabilities (based on HT_CAP_*) */ u8 ctl_ch; /* 802.11N BSS control channel number */ u32 reserved32[1]; /* Reserved for expansion of BSS properties */ u8 flags; /* flags */ u8 reserved[3]; /* Reserved for expansion of BSS properties */ u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */ u16 ie_offset; /* offset at which IEs start, from beginning */ u32 ie_length; /* byte length of Information Elements */ s16 SNR; /* average SNR of during frame reception */ /* Add new fields here */ /* variable length Information Elements */ } wl_bss_info_t; #endif /* BRCM_FULLMAC */ typedef struct wlc_ssid { u32 SSID_len; unsigned char SSID[32]; } wlc_ssid_t; #ifdef BRCM_FULLMAC typedef struct chan_scandata { u8 txpower; u8 pad; chanspec_t channel; /* Channel num, bw, ctrl_sb and band */ u32 channel_mintime; u32 channel_maxtime; } chan_scandata_t; typedef enum wl_scan_type { EXTDSCAN_FOREGROUND_SCAN, EXTDSCAN_BACKGROUND_SCAN, EXTDSCAN_FORCEDBACKGROUND_SCAN } wl_scan_type_t; #define WLC_EXTDSCAN_MAX_SSID 5 #define WL_BSS_FLAGS_FROM_BEACON 0x01 /* bss_info derived from beacon */ #define WL_BSS_FLAGS_FROM_CACHE 0x02 /* bss_info collected from cache */ #define WL_BSS_FLAGS_RSSI_ONCHANNEL 0x04 /* rssi info was received on channel (vs offchannel) */ typedef struct wl_extdscan_params { s8 nprobes; /* 0, passive, otherwise active */ s8 split_scan; /* split scan */ s8 band; /* band */ s8 pad; wlc_ssid_t ssid[WLC_EXTDSCAN_MAX_SSID]; /* ssid list */ u32 tx_rate; /* in 500ksec units */ wl_scan_type_t scan_type; /* enum */ s32 channel_num; chan_scandata_t channel_list[1]; /* list of chandata structs */ } wl_extdscan_params_t; #define WL_EXTDSCAN_PARAMS_FIXED_SIZE (sizeof(wl_extdscan_params_t) - sizeof(chan_scandata_t)) #define WL_BSSTYPE_INFRA 1 #define WL_BSSTYPE_INDEP 0 #define WL_BSSTYPE_ANY 2 /* Bitmask for scan_type */ #define WL_SCANFLAGS_PASSIVE 0x01 /* force passive scan */ #define WL_SCANFLAGS_RESERVED 0x02 /* Reserved */ #define WL_SCANFLAGS_PROHIBITED 0x04 /* allow scanning prohibited channels */ typedef struct wl_scan_params { wlc_ssid_t ssid; /* default: {0, ""} */ u8 bssid[ETH_ALEN]; /* default: bcast */ s8 bss_type; /* default: any, * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */ u8 scan_type; /* flags, 0 use default */ s32 nprobes; /* -1 use default, number of probes per channel */ s32 active_time; /* -1 use default, dwell time per channel for * active scanning */ s32 passive_time; /* -1 use default, dwell time per channel * for passive scanning */ s32 home_time; /* -1 use default, dwell time for the home channel * between channel scans */ s32 channel_num; /* count of channels and ssids that follow * * low half is count of channels in channel_list, 0 * means default (use all available channels) * * high half is entries in wlc_ssid_t array that * follows channel_list, aligned for s32 (4 bytes) * meaning an odd channel count implies a 2-byte pad * between end of channel_list and first ssid * * if ssid count is zero, single ssid in the fixed * parameter portion is assumed, otherwise ssid in * the fixed portion is ignored */ u16 channel_list[1]; /* list of chanspecs */ } wl_scan_params_t; /* size of wl_scan_params not including variable length array */ #define WL_SCAN_PARAMS_FIXED_SIZE 64 /* masks for channel and ssid count */ #define WL_SCAN_PARAMS_COUNT_MASK 0x0000ffff #define WL_SCAN_PARAMS_NSSID_SHIFT 16 #define WL_SCAN_ACTION_START 1 #define WL_SCAN_ACTION_CONTINUE 2 #define WL_SCAN_ACTION_ABORT 3 #define ISCAN_REQ_VERSION 1 /* incremental scan struct */ typedef struct wl_iscan_params { u32 version; u16 action; u16 scan_duration; wl_scan_params_t params; } wl_iscan_params_t; /* 3 fields + size of wl_scan_params, not including variable length array */ #define WL_ISCAN_PARAMS_FIXED_SIZE (offsetof(wl_iscan_params_t, params) + sizeof(wlc_ssid_t)) typedef struct wl_scan_results { u32 buflen; u32 version; u32 count; wl_bss_info_t bss_info[1]; } wl_scan_results_t; /* size of wl_scan_results not including variable length array */ #define WL_SCAN_RESULTS_FIXED_SIZE (sizeof(wl_scan_results_t) - sizeof(wl_bss_info_t)) /* wl_iscan_results status values */ #define WL_SCAN_RESULTS_SUCCESS 0 #define WL_SCAN_RESULTS_PARTIAL 1 #define WL_SCAN_RESULTS_PENDING 2 #define WL_SCAN_RESULTS_ABORTED 3 #define WL_SCAN_RESULTS_NO_MEM 4 #define ESCAN_REQ_VERSION 1 typedef struct wl_escan_params { u32 version; u16 action; u16 sync_id; wl_scan_params_t params; } wl_escan_params_t; #define WL_ESCAN_PARAMS_FIXED_SIZE (offsetof(wl_escan_params_t, params) + sizeof(wlc_ssid_t)) typedef struct wl_escan_result { u32 buflen; u32 version; u16 sync_id; u16 bss_count; wl_bss_info_t bss_info[1]; } wl_escan_result_t; #define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(wl_escan_result_t) - sizeof(wl_bss_info_t)) /* incremental scan results struct */ typedef struct wl_iscan_results { u32 status; wl_scan_results_t results; } wl_iscan_results_t; /* size of wl_iscan_results not including variable length array */ #define WL_ISCAN_RESULTS_FIXED_SIZE \ (WL_SCAN_RESULTS_FIXED_SIZE + offsetof(wl_iscan_results_t, results)) typedef struct wl_probe_params { wlc_ssid_t ssid; u8 bssid[ETH_ALEN]; u8 mac[ETH_ALEN]; } wl_probe_params_t; #endif /* BRCM_FULLMAC */ #define WL_NUMRATES 16 /* max # of rates in a rateset */ typedef struct wl_rateset { u32 count; /* # rates in this set */ u8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ } wl_rateset_t; #ifdef BRCM_FULLMAC typedef struct wl_rateset_args { u32 count; /* # rates in this set */ u8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */ u8 mcs[MCSSET_LEN]; /* supported mcs index bit map */ } wl_rateset_args_t; /* u32 list */ typedef struct wl_u32_list { /* in - # of elements, out - # of entries */ u32 count; /* variable length u32 list */ u32 element[1]; } wl_u32_list_t; /* used for association with a specific BSSID and chanspec list */ typedef struct wl_assoc_params { u8 bssid[ETH_ALEN]; /* 00:00:00:00:00:00: broadcast scan */ u16 bssid_cnt; s32 chanspec_num; /* 0: all available channels, * otherwise count of chanspecs in chanspec_list */ chanspec_t chanspec_list[1]; /* list of chanspecs */ } wl_assoc_params_t; #define WL_ASSOC_PARAMS_FIXED_SIZE (sizeof(wl_assoc_params_t) - sizeof(chanspec_t)) /* used for reassociation/roam to a specific BSSID and channel */ typedef wl_assoc_params_t wl_reassoc_params_t; #define WL_REASSOC_PARAMS_FIXED_SIZE WL_ASSOC_PARAMS_FIXED_SIZE /* used for join with or without a specific bssid and channel list */ typedef struct wl_join_params { wlc_ssid_t ssid; wl_assoc_params_t params; /* optional field, but it must include the fixed portion * of the wl_assoc_params_t struct when it does present. */ } wl_join_params_t; #define WL_JOIN_PARAMS_FIXED_SIZE (sizeof(wl_join_params_t) - sizeof(chanspec_t)) #endif /* BRCM_FULLMAC */ /* defines used by the nrate iovar */ #define NRATE_MCS_INUSE 0x00000080 /* MSC in use,indicates b0-6 holds an mcs */ #define NRATE_RATE_MASK 0x0000007f /* rate/mcs value */ #define NRATE_STF_MASK 0x0000ff00 /* stf mode mask: siso, cdd, stbc, sdm */ #define NRATE_STF_SHIFT 8 /* stf mode shift */ #define NRATE_OVERRIDE 0x80000000 /* bit indicates override both rate & mode */ #define NRATE_OVERRIDE_MCS_ONLY 0x40000000 /* bit indicate to override mcs only */ #define NRATE_SGI_MASK 0x00800000 /* sgi mode */ #define NRATE_SGI_SHIFT 23 /* sgi mode */ #define NRATE_LDPC_CODING 0x00400000 /* bit indicates adv coding in use */ #define NRATE_LDPC_SHIFT 22 /* ldpc shift */ #define NRATE_STF_SISO 0 /* stf mode SISO */ #define NRATE_STF_CDD 1 /* stf mode CDD */ #define NRATE_STF_STBC 2 /* stf mode STBC */ #define NRATE_STF_SDM 3 /* stf mode SDM */ #define ANTENNA_NUM_1 1 /* total number of antennas to be used */ #define ANTENNA_NUM_2 2 #define ANTENNA_NUM_3 3 #define ANTENNA_NUM_4 4 #define ANT_SELCFG_AUTO 0x80 /* bit indicates antenna sel AUTO */ #define ANT_SELCFG_MASK 0x33 /* antenna configuration mask */ #define ANT_SELCFG_MAX 4 /* max number of antenna configurations */ #define ANT_SELCFG_TX_UNICAST 0 /* unicast tx antenna configuration */ #define ANT_SELCFG_RX_UNICAST 1 /* unicast rx antenna configuration */ #define ANT_SELCFG_TX_DEF 2 /* default tx antenna configuration */ #define ANT_SELCFG_RX_DEF 3 /* default rx antenna configuration */ #define MAX_STREAMS_SUPPORTED 4 /* max number of streams supported */ typedef struct { u8 ant_config[ANT_SELCFG_MAX]; /* antenna configuration */ u8 num_antcfg; /* number of available antenna configurations */ } wlc_antselcfg_t; #define HIGHEST_SINGLE_STREAM_MCS 7 /* MCS values greater than this enable multiple streams */ #ifdef BRCM_FULLMAC #define MAX_CCA_CHANNELS 38 /* Max number of 20 Mhz wide channels */ #define MAX_CCA_SECS 60 /* CCA keeps this many seconds history */ #define IBSS_MED 15 /* Mediom in-bss congestion percentage */ #define IBSS_HI 25 /* Hi in-bss congestion percentage */ #define OBSS_MED 12 #define OBSS_HI 25 #define INTERFER_MED 5 #define INTERFER_HI 10 #define CCA_FLAG_2G_ONLY 0x01 /* Return a channel from 2.4 Ghz band */ #define CCA_FLAG_5G_ONLY 0x02 /* Return a channel from 2.4 Ghz band */ #define CCA_FLAG_IGNORE_DURATION 0x04 /* Ignore dwell time for each channel */ #define CCA_FLAGS_PREFER_1_6_11 0x10 #define CCA_FLAG_IGNORE_INTERFER 0x20 /* do not exlude channel based on interfer level */ #define CCA_ERRNO_BAND 1 /* After filtering for band pref, no choices left */ #define CCA_ERRNO_DURATION 2 /* After filtering for duration, no choices left */ #define CCA_ERRNO_PREF_CHAN 3 /* After filtering for chan pref, no choices left */ #define CCA_ERRNO_INTERFER 4 /* After filtering for interference, no choices left */ #define CCA_ERRNO_TOO_FEW 5 /* Only 1 channel was input */ typedef struct { u32 duration; /* millisecs spent sampling this channel */ u32 congest_ibss; /* millisecs in our bss (presumably this traffic will */ /* move if cur bss moves channels) */ u32 congest_obss; /* traffic not in our bss */ u32 interference; /* millisecs detecting a non 802.11 interferer. */ u32 timestamp; /* second timestamp */ } cca_congest_t; typedef struct { chanspec_t chanspec; /* Which channel? */ u8 num_secs; /* How many secs worth of data */ cca_congest_t secs[1]; /* Data */ } cca_congest_channel_req_t; #endif /* BRCM_FULLMAC */ #define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NUL */ #ifdef BRCM_FULLMAC typedef struct wl_country { char country_abbrev[WLC_CNTRY_BUF_SZ]; /* nul-terminated country code used in * the Country IE */ s32 rev; /* revision specifier for ccode * on set, -1 indicates unspecified. * on get, rev >= 0 */ char ccode[WLC_CNTRY_BUF_SZ]; /* nul-terminated built-in country code. * variable length, but fixed size in * struct allows simple allocation for * expected country strings <= 3 chars. */ } wl_country_t; typedef struct wl_channels_in_country { u32 buflen; u32 band; char country_abbrev[WLC_CNTRY_BUF_SZ]; u32 count; u32 channel[1]; } wl_channels_in_country_t; typedef struct wl_country_list { u32 buflen; u32 band_set; u32 band; u32 count; char country_abbrev[1]; } wl_country_list_t; #define WL_NUM_RPI_BINS 8 #define WL_RM_TYPE_BASIC 1 #define WL_RM_TYPE_CCA 2 #define WL_RM_TYPE_RPI 3 #define WL_RM_FLAG_PARALLEL (1<<0) #define WL_RM_FLAG_LATE (1<<1) #define WL_RM_FLAG_INCAPABLE (1<<2) #define WL_RM_FLAG_REFUSED (1<<3) typedef struct wl_rm_req_elt { s8 type; s8 flags; chanspec_t chanspec; u32 token; /* token for this measurement */ u32 tsf_h; /* TSF high 32-bits of Measurement start time */ u32 tsf_l; /* TSF low 32-bits */ u32 dur; /* TUs */ } wl_rm_req_elt_t; typedef struct wl_rm_req { u32 token; /* overall measurement set token */ u32 count; /* number of measurement requests */ void *cb; /* completion callback function: may be NULL */ void *cb_arg; /* arg to completion callback function */ wl_rm_req_elt_t req[1]; /* variable length block of requests */ } wl_rm_req_t; #define WL_RM_REQ_FIXED_LEN offsetof(wl_rm_req_t, req) typedef struct wl_rm_rep_elt { s8 type; s8 flags; chanspec_t chanspec; u32 token; /* token for this measurement */ u32 tsf_h; /* TSF high 32-bits of Measurement start time */ u32 tsf_l; /* TSF low 32-bits */ u32 dur; /* TUs */ u32 len; /* byte length of data block */ u8 data[1]; /* variable length data block */ } wl_rm_rep_elt_t; #define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */ #define WL_RPI_REP_BIN_NUM 8 typedef struct wl_rm_rpi_rep { u8 rpi[WL_RPI_REP_BIN_NUM]; s8 rpi_max[WL_RPI_REP_BIN_NUM]; } wl_rm_rpi_rep_t; typedef struct wl_rm_rep { u32 token; /* overall measurement set token */ u32 len; /* length of measurement report block */ wl_rm_rep_elt_t rep[1]; /* variable length block of reports */ } wl_rm_rep_t; #define WL_RM_REP_FIXED_LEN 8 #endif /* BRCM_FULLMAC */ /* Enumerate crypto algorithms */ #define CRYPTO_ALGO_OFF 0 #define CRYPTO_ALGO_WEP1 1 #define CRYPTO_ALGO_TKIP 2 #define CRYPTO_ALGO_WEP128 3 #define CRYPTO_ALGO_AES_CCM 4 #define CRYPTO_ALGO_AES_RESERVED1 5 #define CRYPTO_ALGO_AES_RESERVED2 6 #define CRYPTO_ALGO_NALG 7 #define WSEC_GEN_MIC_ERROR 0x0001 #define WSEC_GEN_REPLAY 0x0002 #define WSEC_GEN_ICV_ERROR 0x0004 #define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */ #define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */ #define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */ #define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */ #define WL_IBSS_PEER_GROUP_KEY (1 << 6) /* Indicates a group key for a IBSS PEER */ typedef struct wl_wsec_key { u32 index; /* key index */ u32 len; /* key length */ u8 data[WLAN_MAX_KEY_LEN]; /* key data */ u32 pad_1[18]; u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ u32 flags; /* misc flags */ u32 pad_2[2]; int pad_3; int iv_initialized; /* has IV been initialized already? */ int pad_4; /* Rx IV */ struct { u32 hi; /* upper 32 bits of IV */ u16 lo; /* lower 16 bits of IV */ } rxiv; u32 pad_5[2]; u8 ea[ETH_ALEN]; /* per station */ } wl_wsec_key_t; #define WSEC_MIN_PSK_LEN 8 #define WSEC_MAX_PSK_LEN 64 /* Flag for key material needing passhash'ing */ #define WSEC_PASSPHRASE (1<<0) /* receptacle for WLC_SET_WSEC_PMK parameter */ typedef struct { unsigned short key_len; /* octets in key material */ unsigned short flags; /* key handling qualification */ u8 key[WSEC_MAX_PSK_LEN]; /* PMK material */ } wsec_pmk_t; /* wireless security bitvec */ #define WEP_ENABLED 0x0001 #define TKIP_ENABLED 0x0002 #define AES_ENABLED 0x0004 #define WSEC_SWFLAG 0x0008 #define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */ /* WPA authentication mode bitvec */ #define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */ #define WPA_AUTH_NONE 0x0001 /* none (IBSS) */ #define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */ #define WPA_AUTH_PSK 0x0004 /* Pre-shared key */ #define WPA_AUTH_RESERVED1 0x0008 #define WPA_AUTH_RESERVED2 0x0010 /* #define WPA_AUTH_8021X 0x0020 *//* 802.1x, reserved */ #define WPA2_AUTH_RESERVED1 0x0020 #define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */ #define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */ #define WPA2_AUTH_RESERVED3 0x0200 #define WPA2_AUTH_RESERVED4 0x0400 #define WPA2_AUTH_RESERVED5 0x0800 /* pmkid */ #define MAXPMKID 16 typedef struct _pmkid { u8 BSSID[ETH_ALEN]; u8 PMKID[WLAN_PMKID_LEN]; } pmkid_t; typedef struct _pmkid_list { u32 npmkid; pmkid_t pmkid[1]; } pmkid_list_t; typedef struct _pmkid_cand { u8 BSSID[ETH_ALEN]; u8 preauth; } pmkid_cand_t; typedef struct _pmkid_cand_list { u32 npmkid_cand; pmkid_cand_t pmkid_cand[1]; } pmkid_cand_list_t; typedef struct wl_led_info { u32 index; /* led index */ u32 behavior; u8 activehi; } wl_led_info_t; /* R_REG and W_REG struct passed through ioctl */ typedef struct { u32 byteoff; /* byte offset of the field in d11regs_t */ u32 val; /* read/write value of the field */ u32 size; /* sizeof the field */ uint band; /* band (optional) */ } rw_reg_t; #ifdef BRCM_FULLMAC /* Used to get specific STA parameters */ typedef struct { u32 val; u8 ea[ETH_ALEN]; } scb_val_t; #endif /* BRCM_FULLMAC */ /* channel encoding */ typedef struct channel_info { int hw_channel; int target_channel; int scan_channel; } channel_info_t; /* For ioctls that take a list of MAC addresses */ struct maclist { uint count; /* number of MAC addresses */ u8 ea[1][ETH_ALEN]; /* variable length array of MAC addresses */ }; #ifdef BRCM_FULLMAC /* Linux network driver ioctl encoding */ typedef struct wl_ioctl { uint cmd; /* common ioctl definition */ void *buf; /* pointer to user buffer */ uint len; /* length of user buffer */ u8 set; /* get or set request (optional) */ uint used; /* bytes read or written (optional) */ uint needed; /* bytes needed (optional) */ } wl_ioctl_t; #endif /* BRCM_FULLMAC */ /* * Structure for passing hardware and software * revision info up from the driver. */ typedef struct wlc_rev_info { uint vendorid; /* PCI vendor id */ uint deviceid; /* device id of chip */ uint radiorev; /* radio revision */ uint chiprev; /* chip revision */ uint corerev; /* core revision */ uint boardid; /* board identifier (usu. PCI sub-device id) */ uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */ uint boardrev; /* board revision */ uint driverrev; /* driver version */ uint ucoderev; /* microcode version */ uint bus; /* bus type */ uint chipnum; /* chip number */ uint phytype; /* phy type */ uint phyrev; /* phy revision */ uint anarev; /* anacore rev */ uint chippkg; /* chip package info */ } wlc_rev_info_t; #define WL_REV_INFO_LEGACY_LENGTH 48 #ifdef BRCM_FULLMAC #define WLC_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */ #define WLC_IOCTL_MEDLEN 1536 /* "med" length ioctl buffer required */ #define WLC_IOCTL_MAXLEN 8192 #endif /* common ioctl definitions */ #define WLC_GET_MAGIC 0 #define WLC_GET_VERSION 1 #define WLC_UP 2 #define WLC_DOWN 3 #define WLC_GET_LOOP 4 #define WLC_SET_LOOP 5 #define WLC_DUMP 6 #define WLC_GET_MSGLEVEL 7 #define WLC_SET_MSGLEVEL 8 #define WLC_GET_PROMISC 9 #define WLC_SET_PROMISC 10 #define WLC_OVERLAY_IOCTL 11 #define WLC_GET_RATE 12 /* #define WLC_SET_RATE 13 *//* no longer supported */ #define WLC_GET_INSTANCE 14 /* #define WLC_GET_FRAG 15 *//* no longer supported */ /* #define WLC_SET_FRAG 16 *//* no longer supported */ /* #define WLC_GET_RTS 17 *//* no longer supported */ /* #define WLC_SET_RTS 18 *//* no longer supported */ #define WLC_GET_INFRA 19 #define WLC_SET_INFRA 20 #define WLC_GET_AUTH 21 #define WLC_SET_AUTH 22 #define WLC_GET_BSSID 23 #define WLC_SET_BSSID 24 #define WLC_GET_SSID 25 #define WLC_SET_SSID 26 #define WLC_RESTART 27 /* #define WLC_DUMP_SCB 28 *//* no longer supported */ #define WLC_GET_CHANNEL 29 #define WLC_SET_CHANNEL 30 #define WLC_GET_SRL 31 #define WLC_SET_SRL 32 #define WLC_GET_LRL 33 #define WLC_SET_LRL 34 #define WLC_GET_PLCPHDR 35 #define WLC_SET_PLCPHDR 36 #define WLC_GET_RADIO 37 #define WLC_SET_RADIO 38 #define WLC_GET_PHYTYPE 39 #define WLC_DUMP_RATE 40 #define WLC_SET_RATE_PARAMS 41 #define WLC_GET_FIXRATE 42 #define WLC_SET_FIXRATE 43 /* #define WLC_GET_WEP 42 *//* no longer supported */ /* #define WLC_SET_WEP 43 *//* no longer supported */ #define WLC_GET_KEY 44 #define WLC_SET_KEY 45 #define WLC_GET_REGULATORY 46 #define WLC_SET_REGULATORY 47 #define WLC_GET_PASSIVE_SCAN 48 #define WLC_SET_PASSIVE_SCAN 49 #define WLC_SCAN 50 #define WLC_SCAN_RESULTS 51 #define WLC_DISASSOC 52 #define WLC_REASSOC 53 #define WLC_GET_ROAM_TRIGGER 54 #define WLC_SET_ROAM_TRIGGER 55 #define WLC_GET_ROAM_DELTA 56 #define WLC_SET_ROAM_DELTA 57 #define WLC_GET_ROAM_SCAN_PERIOD 58 #define WLC_SET_ROAM_SCAN_PERIOD 59 #define WLC_EVM 60 /* diag */ #define WLC_GET_TXANT 61 #define WLC_SET_TXANT 62 #define WLC_GET_ANTDIV 63 #define WLC_SET_ANTDIV 64 /* #define WLC_GET_TXPWR 65 *//* no longer supported */ /* #define WLC_SET_TXPWR 66 *//* no longer supported */ #define WLC_GET_CLOSED 67 #define WLC_SET_CLOSED 68 #define WLC_GET_MACLIST 69 #define WLC_SET_MACLIST 70 #define WLC_GET_RATESET 71 #define WLC_SET_RATESET 72 /* #define WLC_GET_LOCALE 73 *//* no longer supported */ #define WLC_LONGTRAIN 74 #define WLC_GET_BCNPRD 75 #define WLC_SET_BCNPRD 76 #define WLC_GET_DTIMPRD 77 #define WLC_SET_DTIMPRD 78 #define WLC_GET_SROM 79 #define WLC_SET_SROM 80 #define WLC_GET_WEP_RESTRICT 81 #define WLC_SET_WEP_RESTRICT 82 #define WLC_GET_COUNTRY 83 #define WLC_SET_COUNTRY 84 #define WLC_GET_PM 85 #define WLC_SET_PM 86 #define WLC_GET_WAKE 87 #define WLC_SET_WAKE 88 /* #define WLC_GET_D11CNTS 89 *//* -> "counters" iovar */ #define WLC_GET_FORCELINK 90 /* ndis only */ #define WLC_SET_FORCELINK 91 /* ndis only */ #define WLC_FREQ_ACCURACY 92 /* diag */ #define WLC_CARRIER_SUPPRESS 93 /* diag */ #define WLC_GET_PHYREG 94 #define WLC_SET_PHYREG 95 #define WLC_GET_RADIOREG 96 #define WLC_SET_RADIOREG 97 #define WLC_GET_REVINFO 98 #define WLC_GET_UCANTDIV 99 #define WLC_SET_UCANTDIV 100 #define WLC_R_REG 101 #define WLC_W_REG 102 /* #define WLC_DIAG_LOOPBACK 103 old tray diag */ /* #define WLC_RESET_D11CNTS 104 *//* -> "reset_d11cnts" iovar */ #define WLC_GET_MACMODE 105 #define WLC_SET_MACMODE 106 #define WLC_GET_MONITOR 107 #define WLC_SET_MONITOR 108 #define WLC_GET_GMODE 109 #define WLC_SET_GMODE 110 #define WLC_GET_LEGACY_ERP 111 #define WLC_SET_LEGACY_ERP 112 #define WLC_GET_RX_ANT 113 #define WLC_GET_CURR_RATESET 114 /* current rateset */ #define WLC_GET_SCANSUPPRESS 115 #define WLC_SET_SCANSUPPRESS 116 #define WLC_GET_AP 117 #define WLC_SET_AP 118 #define WLC_GET_EAP_RESTRICT 119 #define WLC_SET_EAP_RESTRICT 120 #define WLC_SCB_AUTHORIZE 121 #define WLC_SCB_DEAUTHORIZE 122 #define WLC_GET_WDSLIST 123 #define WLC_SET_WDSLIST 124 #define WLC_GET_ATIM 125 #define WLC_SET_ATIM 126 #define WLC_GET_RSSI 127 #define WLC_GET_PHYANTDIV 128 #define WLC_SET_PHYANTDIV 129 #define WLC_AP_RX_ONLY 130 #define WLC_GET_TX_PATH_PWR 131 #define WLC_SET_TX_PATH_PWR 132 #define WLC_GET_WSEC 133 #define WLC_SET_WSEC 134 #define WLC_GET_PHY_NOISE 135 #define WLC_GET_BSS_INFO 136 #define WLC_GET_PKTCNTS 137 #define WLC_GET_LAZYWDS 138 #define WLC_SET_LAZYWDS 139 #define WLC_GET_BANDLIST 140 #define WLC_GET_BAND 141 #define WLC_SET_BAND 142 #define WLC_SCB_DEAUTHENTICATE 143 #define WLC_GET_SHORTSLOT 144 #define WLC_GET_SHORTSLOT_OVERRIDE 145 #define WLC_SET_SHORTSLOT_OVERRIDE 146 #define WLC_GET_SHORTSLOT_RESTRICT 147 #define WLC_SET_SHORTSLOT_RESTRICT 148 #define WLC_GET_GMODE_PROTECTION 149 #define WLC_GET_GMODE_PROTECTION_OVERRIDE 150 #define WLC_SET_GMODE_PROTECTION_OVERRIDE 151 #define WLC_UPGRADE 152 /* #define WLC_GET_MRATE 153 *//* no longer supported */ /* #define WLC_SET_MRATE 154 *//* no longer supported */ #define WLC_GET_IGNORE_BCNS 155 #define WLC_SET_IGNORE_BCNS 156 #define WLC_GET_SCB_TIMEOUT 157 #define WLC_SET_SCB_TIMEOUT 158 #define WLC_GET_ASSOCLIST 159 #define WLC_GET_CLK 160 #define WLC_SET_CLK 161 #define WLC_GET_UP 162 #define WLC_OUT 163 #define WLC_GET_WPA_AUTH 164 #define WLC_SET_WPA_AUTH 165 #define WLC_GET_UCFLAGS 166 #define WLC_SET_UCFLAGS 167 #define WLC_GET_PWRIDX 168 #define WLC_SET_PWRIDX 169 #define WLC_GET_TSSI 170 #define WLC_GET_SUP_RATESET_OVERRIDE 171 #define WLC_SET_SUP_RATESET_OVERRIDE 172 /* #define WLC_SET_FAST_TIMER 173 *//* no longer supported */ /* #define WLC_GET_FAST_TIMER 174 *//* no longer supported */ /* #define WLC_SET_SLOW_TIMER 175 *//* no longer supported */ /* #define WLC_GET_SLOW_TIMER 176 *//* no longer supported */ /* #define WLC_DUMP_PHYREGS 177 *//* no longer supported */ #define WLC_GET_PROTECTION_CONTROL 178 #define WLC_SET_PROTECTION_CONTROL 179 #define WLC_GET_PHYLIST 180 #define WLC_ENCRYPT_STRENGTH 181 /* ndis only */ #define WLC_DECRYPT_STATUS 182 /* ndis only */ #define WLC_GET_KEY_SEQ 183 #define WLC_GET_SCAN_CHANNEL_TIME 184 #define WLC_SET_SCAN_CHANNEL_TIME 185 #define WLC_GET_SCAN_UNASSOC_TIME 186 #define WLC_SET_SCAN_UNASSOC_TIME 187 #define WLC_GET_SCAN_HOME_TIME 188 #define WLC_SET_SCAN_HOME_TIME 189 #define WLC_GET_SCAN_NPROBES 190 #define WLC_SET_SCAN_NPROBES 191 #define WLC_GET_PRB_RESP_TIMEOUT 192 #define WLC_SET_PRB_RESP_TIMEOUT 193 #define WLC_GET_ATTEN 194 #define WLC_SET_ATTEN 195 #define WLC_GET_SHMEM 196 /* diag */ #define WLC_SET_SHMEM 197 /* diag */ /* #define WLC_GET_GMODE_PROTECTION_CTS 198 *//* no longer supported */ /* #define WLC_SET_GMODE_PROTECTION_CTS 199 *//* no longer supported */ #define WLC_SET_WSEC_TEST 200 #define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201 #define WLC_TKIP_COUNTERMEASURES 202 #define WLC_GET_PIOMODE 203 #define WLC_SET_PIOMODE 204 #define WLC_SET_ASSOC_PREFER 205 #define WLC_GET_ASSOC_PREFER 206 #define WLC_SET_ROAM_PREFER 207 #define WLC_GET_ROAM_PREFER 208 #define WLC_SET_LED 209 #define WLC_GET_LED 210 #define WLC_RESERVED6 211 #define WLC_RESERVED7 212 #define WLC_GET_CHANNEL_QA 213 #define WLC_START_CHANNEL_QA 214 #define WLC_GET_CHANNEL_SEL 215 #define WLC_START_CHANNEL_SEL 216 #define WLC_GET_VALID_CHANNELS 217 #define WLC_GET_FAKEFRAG 218 #define WLC_SET_FAKEFRAG 219 #define WLC_GET_PWROUT_PERCENTAGE 220 #define WLC_SET_PWROUT_PERCENTAGE 221 #define WLC_SET_BAD_FRAME_PREEMPT 222 #define WLC_GET_BAD_FRAME_PREEMPT 223 #define WLC_SET_LEAP_LIST 224 #define WLC_GET_LEAP_LIST 225 #define WLC_GET_CWMIN 226 #define WLC_SET_CWMIN 227 #define WLC_GET_CWMAX 228 #define WLC_SET_CWMAX 229 #define WLC_GET_WET 230 #define WLC_SET_WET 231 #define WLC_GET_PUB 232 /* #define WLC_SET_GLACIAL_TIMER 233 *//* no longer supported */ /* #define WLC_GET_GLACIAL_TIMER 234 *//* no longer supported */ #define WLC_GET_KEY_PRIMARY 235 #define WLC_SET_KEY_PRIMARY 236 /* #define WLC_DUMP_RADIOREGS 237 *//* no longer supported */ #define WLC_RESERVED4 238 #define WLC_RESERVED5 239 #define WLC_UNSET_CALLBACK 240 #define WLC_SET_CALLBACK 241 #define WLC_GET_RADAR 242 #define WLC_SET_RADAR 243 #define WLC_SET_SPECT_MANAGMENT 244 #define WLC_GET_SPECT_MANAGMENT 245 #define WLC_WDS_GET_REMOTE_HWADDR 246 /* handled in wl_linux.c/wl_vx.c */ #define WLC_WDS_GET_WPA_SUP 247 #define WLC_SET_CS_SCAN_TIMER 248 #define WLC_GET_CS_SCAN_TIMER 249 #define WLC_MEASURE_REQUEST 250 #define WLC_INIT 251 #define WLC_SEND_QUIET 252 #define WLC_KEEPALIVE 253 #define WLC_SEND_PWR_CONSTRAINT 254 #define WLC_UPGRADE_STATUS 255 #define WLC_CURRENT_PWR 256 #define WLC_GET_SCAN_PASSIVE_TIME 257 #define WLC_SET_SCAN_PASSIVE_TIME 258 #define WLC_LEGACY_LINK_BEHAVIOR 259 #define WLC_GET_CHANNELS_IN_COUNTRY 260 #define WLC_GET_COUNTRY_LIST 261 #define WLC_GET_VAR 262 /* get value of named variable */ #define WLC_SET_VAR 263 /* set named variable to value */ #define WLC_NVRAM_GET 264 /* deprecated */ #define WLC_NVRAM_SET 265 #define WLC_NVRAM_DUMP 266 #define WLC_REBOOT 267 #define WLC_SET_WSEC_PMK 268 #define WLC_GET_AUTH_MODE 269 #define WLC_SET_AUTH_MODE 270 #define WLC_GET_WAKEENTRY 271 #define WLC_SET_WAKEENTRY 272 #define WLC_NDCONFIG_ITEM 273 /* currently handled in wl_oid.c */ #define WLC_NVOTPW 274 #define WLC_OTPW 275 #define WLC_IOV_BLOCK_GET 276 #define WLC_IOV_MODULES_GET 277 #define WLC_SOFT_RESET 278 #define WLC_GET_ALLOW_MODE 279 #define WLC_SET_ALLOW_MODE 280 #define WLC_GET_DESIRED_BSSID 281 #define WLC_SET_DESIRED_BSSID 282 #define WLC_DISASSOC_MYAP 283 #define WLC_GET_RESERVED10 284 #define WLC_GET_RESERVED11 285 #define WLC_GET_RESERVED12 286 #define WLC_GET_RESERVED13 287 #define WLC_GET_RESERVED14 288 #define WLC_SET_RESERVED15 289 #define WLC_SET_RESERVED16 290 #define WLC_GET_RESERVED17 291 #define WLC_GET_RESERVED18 292 #define WLC_GET_RESERVED19 293 #define WLC_SET_RESERVED1A 294 #define WLC_GET_RESERVED1B 295 #define WLC_GET_RESERVED1C 296 #define WLC_GET_RESERVED1D 297 #define WLC_SET_RESERVED1E 298 #define WLC_GET_RESERVED1F 299 #define WLC_GET_RESERVED20 300 #define WLC_GET_RESERVED21 301 #define WLC_GET_RESERVED22 302 #define WLC_GET_RESERVED23 303 #define WLC_GET_RESERVED24 304 #define WLC_SET_RESERVED25 305 #define WLC_GET_RESERVED26 306 #define WLC_NPHY_SAMPLE_COLLECT 307 /* Nphy sample collect mode */ #define WLC_UM_PRIV 308 /* for usermode driver private ioctl */ #define WLC_GET_CMD 309 /* #define WLC_LAST 310 *//* Never used - can be reused */ #define WLC_RESERVED8 311 #define WLC_RESERVED9 312 #define WLC_RESERVED1 313 #define WLC_RESERVED2 314 #define WLC_RESERVED3 315 #define WLC_LAST 316 #ifndef EPICTRL_COOKIE #define EPICTRL_COOKIE 0xABADCEDE #endif #define WL_DECRYPT_STATUS_SUCCESS 1 #define WL_DECRYPT_STATUS_FAILURE 2 #define WL_DECRYPT_STATUS_UNKNOWN 3 /* allows user-mode app to poll the status of USB image upgrade */ #define WLC_UPGRADE_SUCCESS 0 #define WLC_UPGRADE_PENDING 1 /* WLC_GET_AUTH, WLC_SET_AUTH values */ #define WL_AUTH_OPEN_SYSTEM 0 /* d11 open authentication */ #define WL_AUTH_SHARED_KEY 1 /* d11 shared authentication */ #define WL_AUTH_OPEN_SHARED 2 /* try open, then shared if open failed w/rc 13 */ /* Bit masks for radio disabled status - returned by WL_GET_RADIO */ #define WL_RADIO_SW_DISABLE (1<<0) #define WL_RADIO_HW_DISABLE (1<<1) #define WL_RADIO_MPC_DISABLE (1<<2) #define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any channel */ #define WL_SPURAVOID_OFF 0 #define WL_SPURAVOID_ON1 1 #define WL_SPURAVOID_ON2 2 /* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */ #define WL_TXPWR_OVERRIDE (1U<<31) #define WL_PHY_PAVARS_LEN 6 /* Phy type, Band range, chain, a1, b0, b1 */ typedef struct wl_po { u16 phy_type; /* Phy type */ u16 band; u16 cckpo; u32 ofdmpo; u16 mcspo[8]; } wl_po_t; /* a large TX Power as an init value to factor out of min() calculations, * keep low enough to fit in an s8, units are .25 dBm */ #define WLC_TXPWR_MAX (127) /* ~32 dBm = 1,500 mW */ /* "diag" iovar argument and error code */ #define WL_DIAG_INTERRUPT 1 /* d11 loopback interrupt test */ #define WL_DIAG_LOOPBACK 2 /* d11 loopback data test */ #define WL_DIAG_MEMORY 3 /* d11 memory test */ #define WL_DIAG_LED 4 /* LED test */ #define WL_DIAG_REG 5 /* d11/phy register test */ #define WL_DIAG_SROM 6 /* srom read/crc test */ #define WL_DIAG_DMA 7 /* DMA test */ #define WL_DIAGERR_SUCCESS 0 #define WL_DIAGERR_FAIL_TO_RUN 1 /* unable to run requested diag */ #define WL_DIAGERR_NOT_SUPPORTED 2 /* diag requested is not supported */ #define WL_DIAGERR_INTERRUPT_FAIL 3 /* loopback interrupt test failed */ #define WL_DIAGERR_LOOPBACK_FAIL 4 /* loopback data test failed */ #define WL_DIAGERR_SROM_FAIL 5 /* srom read failed */ #define WL_DIAGERR_SROM_BADCRC 6 /* srom crc failed */ #define WL_DIAGERR_REG_FAIL 7 /* d11/phy register test failed */ #define WL_DIAGERR_MEMORY_FAIL 8 /* d11 memory test failed */ #define WL_DIAGERR_NOMEM 9 /* diag test failed due to no memory */ #define WL_DIAGERR_DMA_FAIL 10 /* DMA test failed */ #define WL_DIAGERR_MEMORY_TIMEOUT 11 /* d11 memory test didn't finish in time */ #define WL_DIAGERR_MEMORY_BADPATTERN 12 /* d11 memory test result in bad pattern */ /* band types */ #define WLC_BAND_AUTO 0 /* auto-select */ #define WLC_BAND_5G 1 /* 5 Ghz */ #define WLC_BAND_2G 2 /* 2.4 Ghz */ #define WLC_BAND_ALL 3 /* all bands */ /* band range returned by band_range iovar */ #define WL_CHAN_FREQ_RANGE_2G 0 #define WL_CHAN_FREQ_RANGE_5GL 1 #define WL_CHAN_FREQ_RANGE_5GM 2 #define WL_CHAN_FREQ_RANGE_5GH 3 /* phy types (returned by WLC_GET_PHYTPE) */ #define WLC_PHY_TYPE_A 0 #define WLC_PHY_TYPE_B 1 #define WLC_PHY_TYPE_G 2 #define WLC_PHY_TYPE_N 4 #define WLC_PHY_TYPE_LP 5 #define WLC_PHY_TYPE_SSN 6 #define WLC_PHY_TYPE_HT 7 #define WLC_PHY_TYPE_LCN 8 #define WLC_PHY_TYPE_NULL 0xf /* MAC list modes */ #define WLC_MACMODE_DISABLED 0 /* MAC list disabled */ #define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */ #define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */ /* * 54g modes (basic bits may still be overridden) * * GMODE_LEGACY_B Rateset: 1b, 2b, 5.5, 11 * Preamble: Long * Shortslot: Off * GMODE_AUTO Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 * Extended Rateset: 6, 9, 12, 48 * Preamble: Long * Shortslot: Auto * GMODE_ONLY Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 * Extended Rateset: 6b, 9, 12b, 48 * Preamble: Short required * Shortslot: Auto * GMODE_B_DEFERRED Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 * Extended Rateset: 6, 9, 12, 48 * Preamble: Long * Shortslot: On * GMODE_PERFORMANCE Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 * Preamble: Short required * Shortslot: On and required * GMODE_LRS Rateset: 1b, 2b, 5.5b, 11b * Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 * Preamble: Long * Shortslot: Auto */ #define GMODE_LEGACY_B 0 #define GMODE_AUTO 1 #define GMODE_ONLY 2 #define GMODE_B_DEFERRED 3 #define GMODE_PERFORMANCE 4 #define GMODE_LRS 5 #define GMODE_MAX 6 /* values for PLCPHdr_override */ #define WLC_PLCP_AUTO -1 #define WLC_PLCP_SHORT 0 #define WLC_PLCP_LONG 1 /* values for g_protection_override and n_protection_override */ #define WLC_PROTECTION_AUTO -1 #define WLC_PROTECTION_OFF 0 #define WLC_PROTECTION_ON 1 #define WLC_PROTECTION_MMHDR_ONLY 2 #define WLC_PROTECTION_CTS_ONLY 3 /* values for g_protection_control and n_protection_control */ #define WLC_PROTECTION_CTL_OFF 0 #define WLC_PROTECTION_CTL_LOCAL 1 #define WLC_PROTECTION_CTL_OVERLAP 2 /* values for n_protection */ #define WLC_N_PROTECTION_OFF 0 #define WLC_N_PROTECTION_OPTIONAL 1 #define WLC_N_PROTECTION_20IN40 2 #define WLC_N_PROTECTION_MIXEDMODE 3 /* values for n_preamble_type */ #define WLC_N_PREAMBLE_MIXEDMODE 0 #define WLC_N_PREAMBLE_GF 1 #define WLC_N_PREAMBLE_GF_BRCM 2 /* values for band specific 40MHz capabilities */ #define WLC_N_BW_20ALL 0 #define WLC_N_BW_40ALL 1 #define WLC_N_BW_20IN2G_40IN5G 2 /* values to force tx/rx chain */ #define WLC_N_TXRX_CHAIN0 0 #define WLC_N_TXRX_CHAIN1 1 /* bitflags for SGI support (sgi_rx iovar) */ #define WLC_N_SGI_20 0x01 #define WLC_N_SGI_40 0x02 /* Values for PM */ #define PM_OFF 0 #define PM_MAX 1 /* interference mitigation options */ #define INTERFERE_OVRRIDE_OFF -1 /* interference override off */ #define INTERFERE_NONE 0 /* off */ #define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */ #define WLAN_MANUAL 2 /* ACI: no auto detection */ #define WLAN_AUTO 3 /* ACI: auto detect */ #define WLAN_AUTO_W_NOISE 4 /* ACI: auto - detect and non 802.11 interference */ #define AUTO_ACTIVE (1 << 7) /* Auto is currently active */ #define WL_RSSI_ANT_VERSION 1 /* current version of wl_rssi_ant_t */ #define WL_ANT_RX_MAX 2 /* max 2 receive antennas */ #define WL_ANT_HT_RX_MAX 3 /* max 3 receive antennas/cores */ #define WL_ANT_IDX_1 0 /* antenna index 1 */ #define WL_ANT_IDX_2 1 /* antenna index 2 */ #ifndef WL_RSSI_ANT_MAX #define WL_RSSI_ANT_MAX 4 /* max possible rx antennas */ #elif WL_RSSI_ANT_MAX != 4 #error "WL_RSSI_ANT_MAX does not match" #endif /* RSSI per antenna */ typedef struct { u32 version; /* version field */ u32 count; /* number of valid antenna rssi */ s8 rssi_ant[WL_RSSI_ANT_MAX]; /* rssi per antenna */ } wl_rssi_ant_t; #define NUM_PWRCTRL_RATES 12 typedef struct { u8 txpwr_band_max[NUM_PWRCTRL_RATES]; /* User set target */ u8 txpwr_limit[NUM_PWRCTRL_RATES]; /* reg and local power limit */ u8 txpwr_local_max; /* local max according to the AP */ u8 txpwr_local_constraint; /* local constraint according to the AP */ u8 txpwr_chan_reg_max; /* Regulatory max for this channel */ u8 txpwr_target[2][NUM_PWRCTRL_RATES]; /* Latest target for 2.4 and 5 Ghz */ u8 txpwr_est_Pout[2]; /* Latest estimate for 2.4 and 5 Ghz */ u8 txpwr_opo[NUM_PWRCTRL_RATES]; /* On G phy, OFDM power offset */ u8 txpwr_bphy_cck_max[NUM_PWRCTRL_RATES]; /* Max CCK power for this band (SROM) */ u8 txpwr_bphy_ofdm_max; /* Max OFDM power for this band (SROM) */ u8 txpwr_aphy_max[NUM_PWRCTRL_RATES]; /* Max power for A band (SROM) */ s8 txpwr_antgain[2]; /* Ant gain for each band - from SROM */ u8 txpwr_est_Pout_gofdm; /* Pwr estimate for 2.4 OFDM */ } tx_power_legacy_t; #define WL_TX_POWER_RATES_LEGACY 45 #define WL_TX_POWER_MCS20_FIRST 12 #define WL_TX_POWER_MCS20_NUM 16 #define WL_TX_POWER_MCS40_FIRST 28 #define WL_TX_POWER_MCS40_NUM 17 #define WL_TX_POWER_RATES 101 #define WL_TX_POWER_CCK_FIRST 0 #define WL_TX_POWER_CCK_NUM 4 #define WL_TX_POWER_OFDM_FIRST 4 /* Index for first 20MHz OFDM SISO rate */ #define WL_TX_POWER_OFDM20_CDD_FIRST 12 /* Index for first 20MHz OFDM CDD rate */ #define WL_TX_POWER_OFDM40_SISO_FIRST 52 /* Index for first 40MHz OFDM SISO rate */ #define WL_TX_POWER_OFDM40_CDD_FIRST 60 /* Index for first 40MHz OFDM CDD rate */ #define WL_TX_POWER_OFDM_NUM 8 #define WL_TX_POWER_MCS20_SISO_FIRST 20 /* Index for first 20MHz MCS SISO rate */ #define WL_TX_POWER_MCS20_CDD_FIRST 28 /* Index for first 20MHz MCS CDD rate */ #define WL_TX_POWER_MCS20_STBC_FIRST 36 /* Index for first 20MHz MCS STBC rate */ #define WL_TX_POWER_MCS20_SDM_FIRST 44 /* Index for first 20MHz MCS SDM rate */ #define WL_TX_POWER_MCS40_SISO_FIRST 68 /* Index for first 40MHz MCS SISO rate */ #define WL_TX_POWER_MCS40_CDD_FIRST 76 /* Index for first 40MHz MCS CDD rate */ #define WL_TX_POWER_MCS40_STBC_FIRST 84 /* Index for first 40MHz MCS STBC rate */ #define WL_TX_POWER_MCS40_SDM_FIRST 92 /* Index for first 40MHz MCS SDM rate */ #define WL_TX_POWER_MCS_1_STREAM_NUM 8 #define WL_TX_POWER_MCS_2_STREAM_NUM 8 #define WL_TX_POWER_MCS_32 100 /* Index for 40MHz rate MCS 32 */ #define WL_TX_POWER_MCS_32_NUM 1 /* sslpnphy specifics */ #define WL_TX_POWER_MCS20_SISO_FIRST_SSN 12 /* Index for first 20MHz MCS SISO rate */ /* tx_power_t.flags bits */ #define WL_TX_POWER_F_ENABLED 1 #define WL_TX_POWER_F_HW 2 #define WL_TX_POWER_F_MIMO 4 #define WL_TX_POWER_F_SISO 8 typedef struct { u32 flags; chanspec_t chanspec; /* txpwr report for this channel */ chanspec_t local_chanspec; /* channel on which we are associated */ u8 local_max; /* local max according to the AP */ u8 local_constraint; /* local constraint according to the AP */ s8 antgain[2]; /* Ant gain for each band - from SROM */ u8 rf_cores; /* count of RF Cores being reported */ u8 est_Pout[4]; /* Latest tx power out estimate per RF chain */ u8 est_Pout_act[4]; /* Latest tx power out estimate per RF chain * without adjustment */ u8 est_Pout_cck; /* Latest CCK tx power out estimate */ u8 tx_power_max[4]; /* Maximum target power among all rates */ u8 tx_power_max_rate_ind[4]; /* Index of the rate with the max target power */ u8 user_limit[WL_TX_POWER_RATES]; /* User limit */ u8 reg_limit[WL_TX_POWER_RATES]; /* Regulatory power limit */ u8 board_limit[WL_TX_POWER_RATES]; /* Max power board can support (SROM) */ u8 target[WL_TX_POWER_RATES]; /* Latest target power */ } tx_power_t; typedef struct tx_inst_power { u8 txpwr_est_Pout[2]; /* Latest estimate for 2.4 and 5 Ghz */ u8 txpwr_est_Pout_gofdm; /* Pwr estimate for 2.4 OFDM */ } tx_inst_power_t; /* Message levels */ #define WL_ERROR_VAL 0x00000001 #define WL_TRACE_VAL 0x00000002 /* maximum channels returned by the get valid channels iovar */ #define WL_NUMCHANNELS 64 #define WL_NUMCHANSPECS 100 struct tsinfo_arg { u8 octets[3]; }; #define NFIFO 6 /* # tx/rx fifopairs */ struct wl_msglevel2 { u32 low; u32 high; }; /* structure for per-tid ampdu control */ struct ampdu_tid_control { u8 tid; /* tid */ u8 enable; /* enable/disable */ }; /* structure for identifying ea/tid for sending addba/delba */ struct ampdu_ea_tid { u8 ea[ETH_ALEN]; /* Station address */ u8 tid; /* tid */ }; /* structure for identifying retry/tid for retry_limit_tid/rr_retry_limit_tid */ struct ampdu_retry_tid { u8 tid; /* tid */ u8 retry; /* retry value */ }; /* Software feature flag defines used by wlfeatureflag */ #define WL_SWFL_NOHWRADIO 0x0004 #define WL_SWFL_FLOWCONTROL 0x0008 /* Enable backpressure to OS stack */ #define WL_SWFL_WLBSSSORT 0x0010 /* Per-port supports sorting of BSS */ #define WL_LIFETIME_MAX 0xFFFF /* Max value in ms */ /* Pattern matching filter. Specifies an offset within received packets to * start matching, the pattern to match, the size of the pattern, and a bitmask * that indicates which bits within the pattern should be matched. */ typedef struct wl_pkt_filter_pattern { u32 offset; /* Offset within received packet to start pattern matching. * Offset '0' is the first byte of the ethernet header. */ u32 size_bytes; /* Size of the pattern. Bitmask must be the same size. */ u8 mask_and_pattern[1]; /* Variable length mask and pattern data. mask starts * at offset 0. Pattern immediately follows mask. */ } wl_pkt_filter_pattern_t; /* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */ typedef struct wl_pkt_filter { u32 id; /* Unique filter id, specified by app. */ u32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */ u32 negate_match; /* Negate the result of filter matches */ union { /* Filter definitions */ wl_pkt_filter_pattern_t pattern; /* Pattern matching filter */ } u; } wl_pkt_filter_t; #define WL_PKT_FILTER_FIXED_LEN offsetof(wl_pkt_filter_t, u) #define WL_PKT_FILTER_PATTERN_FIXED_LEN offsetof(wl_pkt_filter_pattern_t, mask_and_pattern) /* IOVAR "pkt_filter_enable" parameter. */ typedef struct wl_pkt_filter_enable { u32 id; /* Unique filter id */ u32 enable; /* Enable/disable bool */ } wl_pkt_filter_enable_t; #define WLC_RSSI_INVALID 0 /* invalid RSSI value */ /* n-mode support capability */ /* 2x2 includes both 1x1 & 2x2 devices * reserved #define 2 for future when we want to separate 1x1 & 2x2 and * control it independently */ #define WL_11N_2x2 1 #define WL_11N_3x3 3 #define WL_11N_4x4 4 /* define 11n feature disable flags */ #define WLFEATURE_DISABLE_11N 0x00000001 #define WLFEATURE_DISABLE_11N_STBC_TX 0x00000002 #define WLFEATURE_DISABLE_11N_STBC_RX 0x00000004 #define WLFEATURE_DISABLE_11N_SGI_TX 0x00000008 #define WLFEATURE_DISABLE_11N_SGI_RX 0x00000010 #define WLFEATURE_DISABLE_11N_AMPDU_TX 0x00000020 #define WLFEATURE_DISABLE_11N_AMPDU_RX 0x00000040 #define WLFEATURE_DISABLE_11N_GF 0x00000080 #define WL_EVENTING_MASK_LEN 16 #define TOE_TX_CSUM_OL 0x00000001 #define TOE_RX_CSUM_OL 0x00000002 #define PM_OFF 0 #define PM_MAX 1 #define PM_FAST 2 typedef enum sup_auth_status { WLC_SUP_DISCONNECTED = 0, WLC_SUP_CONNECTING, WLC_SUP_IDREQUIRED, WLC_SUP_AUTHENTICATING, WLC_SUP_AUTHENTICATED, WLC_SUP_KEYXCHANGE, WLC_SUP_KEYED, WLC_SUP_TIMEOUT, WLC_SUP_LAST_BASIC_STATE, WLC_SUP_KEYXCHANGE_WAIT_M1 = WLC_SUP_AUTHENTICATED, WLC_SUP_KEYXCHANGE_PREP_M2 = WLC_SUP_KEYXCHANGE, WLC_SUP_KEYXCHANGE_WAIT_M3 = WLC_SUP_LAST_BASIC_STATE, WLC_SUP_KEYXCHANGE_PREP_M4, WLC_SUP_KEYXCHANGE_WAIT_G1, WLC_SUP_KEYXCHANGE_PREP_G2 } sup_auth_status_t; #endif /* _wlioctl_h_ */