From db5824dd3d632acd79094b81e07288ba05ae2cc1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20R=C3=B6jfors?= Date: Sun, 25 Jul 2010 22:51:05 +0000 Subject: ks8842: Support 100Mbps when accessed via timberdale MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch removes the code which disables 100Mbps advertising when the ks8842 is accessed via timberdale. At higher speed it's good to be nice to the internal state machine of timberdale by acking interrupts. That is done by a write to the interrupt ack register (IAR). Signed-off-by: Richard Röjfors Signed-off-by: David S. Miller --- drivers/net/ks8842.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ks8842.c b/drivers/net/ks8842.c index 634dad1c8b48..289b0bee3462 100644 --- a/drivers/net/ks8842.c +++ b/drivers/net/ks8842.c @@ -34,7 +34,12 @@ #define DRV_NAME "ks8842" /* Timberdale specific Registers */ -#define REG_TIMB_RST 0x1c +#define REG_TIMB_RST 0x1c +#define REG_TIMB_FIFO 0x20 +#define REG_TIMB_ISR 0x24 +#define REG_TIMB_IER 0x28 +#define REG_TIMB_IAR 0x2C +#define REQ_TIMB_DMA_RESUME 0x30 /* KS8842 registers */ @@ -282,10 +287,6 @@ static void ks8842_reset_hw(struct ks8842_adapter *adapter) /* restart port auto-negotiation */ ks8842_enable_bits(adapter, 49, 1 << 13, REG_P1CR4); - if (!(adapter->conf_flags & MICREL_KS884X)) - /* only advertise 10Mbps */ - ks8842_clear_bits(adapter, 49, 3 << 2, REG_P1CR4); - /* Enable the transmitter */ ks8842_enable_tx(adapter); @@ -543,6 +544,10 @@ void ks8842_tasklet(unsigned long arg) /* Ack */ ks8842_write16(adapter, 18, isr, REG_ISR); + if (!(adapter->conf_flags & MICREL_KS884X)) + /* Ack in the timberdale IP as well */ + iowrite32(0x1, adapter->hw_addr + REG_TIMB_IAR); + if (!netif_running(netdev)) return; -- cgit v1.2.1