From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- Documentation/i2c/writing-clients | 816 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 816 insertions(+) create mode 100644 Documentation/i2c/writing-clients (limited to 'Documentation/i2c/writing-clients') diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients new file mode 100644 index 000000000000..ad27511e3c7d --- /dev/null +++ b/Documentation/i2c/writing-clients @@ -0,0 +1,816 @@ +This is a small guide for those who want to write kernel drivers for I2C +or SMBus devices. + +To set up a driver, you need to do several things. Some are optional, and +some things can be done slightly or completely different. Use this as a +guide, not as a rule book! + + +General remarks +=============== + +Try to keep the kernel namespace as clean as possible. The best way to +do this is to use a unique prefix for all global symbols. This is +especially important for exported symbols, but it is a good idea to do +it for non-exported symbols too. We will use the prefix `foo_' in this +tutorial, and `FOO_' for preprocessor variables. + + +The driver structure +==================== + +Usually, you will implement a single driver structure, and instantiate +all clients from it. Remember, a driver structure contains general access +routines, a client structure specific information like the actual I2C +address. + +static struct i2c_driver foo_driver = { + .owner = THIS_MODULE, + .name = "Foo version 2.3 driver", + .id = I2C_DRIVERID_FOO, /* from i2c-id.h, optional */ + .flags = I2C_DF_NOTIFY, + .attach_adapter = &foo_attach_adapter, + .detach_client = &foo_detach_client, + .command = &foo_command /* may be NULL */ +} + +The name can be chosen freely, and may be upto 40 characters long. Please +use something descriptive here. + +If used, the id should be a unique ID. The range 0xf000 to 0xffff is +reserved for local use, and you can use one of those until you start +distributing the driver, at which time you should contact the i2c authors +to get your own ID(s). Note that most of the time you don't need an ID +at all so you can just omit it. + +Don't worry about the flags field; just put I2C_DF_NOTIFY into it. This +means that your driver will be notified when new adapters are found. +This is almost always what you want. + +All other fields are for call-back functions which will be explained +below. + +There use to be two additional fields in this structure, inc_use et dec_use, +for module usage count, but these fields were obsoleted and removed. + + +Extra client data +================= + +The client structure has a special `data' field that can point to any +structure at all. You can use this to keep client-specific data. You +do not always need this, but especially for `sensors' drivers, it can +be very useful. + +An example structure is below. + + struct foo_data { + struct semaphore lock; /* For ISA access in `sensors' drivers. */ + int sysctl_id; /* To keep the /proc directory entry for + `sensors' drivers. */ + enum chips type; /* To keep the chips type for `sensors' drivers. */ + + /* Because the i2c bus is slow, it is often useful to cache the read + information of a chip for some time (for example, 1 or 2 seconds). + It depends of course on the device whether this is really worthwhile + or even sensible. */ + struct semaphore update_lock; /* When we are reading lots of information, + another process should not update the + below information */ + char valid; /* != 0 if the following fields are valid. */ + unsigned long last_updated; /* In jiffies */ + /* Add the read information here too */ + }; + + +Accessing the client +==================== + +Let's say we have a valid client structure. At some time, we will need +to gather information from the client, or write new information to the +client. How we will export this information to user-space is less +important at this moment (perhaps we do not need to do this at all for +some obscure clients). But we need generic reading and writing routines. + +I have found it useful to define foo_read and foo_write function for this. +For some cases, it will be easier to call the i2c functions directly, +but many chips have some kind of register-value idea that can easily +be encapsulated. Also, some chips have both ISA and I2C interfaces, and +it useful to abstract from this (only for `sensors' drivers). + +The below functions are simple examples, and should not be copied +literally. + + int foo_read_value(struct i2c_client *client, u8 reg) + { + if (reg < 0x10) /* byte-sized register */ + return i2c_smbus_read_byte_data(client,reg); + else /* word-sized register */ + return i2c_smbus_read_word_data(client,reg); + } + + int foo_write_value(struct i2c_client *client, u8 reg, u16 value) + { + if (reg == 0x10) /* Impossible to write - driver error! */ { + return -1; + else if (reg < 0x10) /* byte-sized register */ + return i2c_smbus_write_byte_data(client,reg,value); + else /* word-sized register */ + return i2c_smbus_write_word_data(client,reg,value); + } + +For sensors code, you may have to cope with ISA registers too. Something +like the below often works. Note the locking! + + int foo_read_value(struct i2c_client *client, u8 reg) + { + int res; + if (i2c_is_isa_client(client)) { + down(&(((struct foo_data *) (client->data)) -> lock)); + outb_p(reg,client->addr + FOO_ADDR_REG_OFFSET); + res = inb_p(client->addr + FOO_DATA_REG_OFFSET); + up(&(((struct foo_data *) (client->data)) -> lock)); + return res; + } else + return i2c_smbus_read_byte_data(client,reg); + } + +Writing is done the same way. + + +Probing and attaching +===================== + +Most i2c devices can be present on several i2c addresses; for some this +is determined in hardware (by soldering some chip pins to Vcc or Ground), +for others this can be changed in software (by writing to specific client +registers). Some devices are usually on a specific address, but not always; +and some are even more tricky. So you will probably need to scan several +i2c addresses for your clients, and do some sort of detection to see +whether it is actually a device supported by your driver. + +To give the user a maximum of possibilities, some default module parameters +are defined to help determine what addresses are scanned. Several macros +are defined in i2c.h to help you support them, as well as a generic +detection algorithm. + +You do not have to use this parameter interface; but don't try to use +function i2c_probe() (or i2c_detect()) if you don't. + +NOTE: If you want to write a `sensors' driver, the interface is slightly + different! See below. + + + +Probing classes (i2c) +--------------------- + +All parameters are given as lists of unsigned 16-bit integers. Lists are +terminated by I2C_CLIENT_END. +The following lists are used internally: + + normal_i2c: filled in by the module writer. + A list of I2C addresses which should normally be examined. + normal_i2c_range: filled in by the module writer. + A list of pairs of I2C addresses, each pair being an inclusive range of + addresses which should normally be examined. + probe: insmod parameter. + A list of pairs. The first value is a bus number (-1 for any I2C bus), + the second is the address. These addresses are also probed, as if they + were in the 'normal' list. + probe_range: insmod parameter. + A list of triples. The first value is a bus number (-1 for any I2C bus), + the second and third are addresses. These form an inclusive range of + addresses that are also probed, as if they were in the 'normal' list. + ignore: insmod parameter. + A list of pairs. The first value is a bus number (-1 for any I2C bus), + the second is the I2C address. These addresses are never probed. + This parameter overrules 'normal' and 'probe', but not the 'force' lists. + ignore_range: insmod parameter. + A list of triples. The first value is a bus number (-1 for any I2C bus), + the second and third are addresses. These form an inclusive range of + I2C addresses that are never probed. + This parameter overrules 'normal' and 'probe', but not the 'force' lists. + force: insmod parameter. + A list of pairs. The first value is a bus number (-1 for any I2C bus), + the second is the I2C address. A device is blindly assumed to be on + the given address, no probing is done. + +Fortunately, as a module writer, you just have to define the `normal' +and/or `normal_range' parameters. The complete declaration could look +like this: + + /* Scan 0x20 to 0x2f, 0x37, and 0x40 to 0x4f */ + static unsigned short normal_i2c[] = { 0x37,I2C_CLIENT_END }; + static unsigned short normal_i2c_range[] = { 0x20, 0x2f, 0x40, 0x4f, + I2C_CLIENT_END }; + + /* Magic definition of all other variables and things */ + I2C_CLIENT_INSMOD; + +Note that you *have* to call the two defined variables `normal_i2c' and +`normal_i2c_range', without any prefix! + + +Probing classes (sensors) +------------------------- + +If you write a `sensors' driver, you use a slightly different interface. +As well as I2C addresses, we have to cope with ISA addresses. Also, we +use a enum of chip types. Don't forget to include `sensors.h'. + +The following lists are used internally. They are all lists of integers. + + normal_i2c: filled in by the module writer. Terminated by SENSORS_I2C_END. + A list of I2C addresses which should normally be examined. + normal_i2c_range: filled in by the module writer. Terminated by + SENSORS_I2C_END + A list of pairs of I2C addresses, each pair being an inclusive range of + addresses which should normally be examined. + normal_isa: filled in by the module writer. Terminated by SENSORS_ISA_END. + A list of ISA addresses which should normally be examined. + normal_isa_range: filled in by the module writer. Terminated by + SENSORS_ISA_END + A list of triples. The first two elements are ISA addresses, being an + range of addresses which should normally be examined. The third is the + modulo parameter: only addresses which are 0 module this value relative + to the first address of the range are actually considered. + probe: insmod parameter. Initialize this list with SENSORS_I2C_END values. + A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for + the ISA bus, -1 for any I2C bus), the second is the address. These + addresses are also probed, as if they were in the 'normal' list. + probe_range: insmod parameter. Initialize this list with SENSORS_I2C_END + values. + A list of triples. The first value is a bus number (SENSORS_ISA_BUS for + the ISA bus, -1 for any I2C bus), the second and third are addresses. + These form an inclusive range of addresses that are also probed, as + if they were in the 'normal' list. + ignore: insmod parameter. Initialize this list with SENSORS_I2C_END values. + A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for + the ISA bus, -1 for any I2C bus), the second is the I2C address. These + addresses are never probed. This parameter overrules 'normal' and + 'probe', but not the 'force' lists. + ignore_range: insmod parameter. Initialize this list with SENSORS_I2C_END + values. + A list of triples. The first value is a bus number (SENSORS_ISA_BUS for + the ISA bus, -1 for any I2C bus), the second and third are addresses. + These form an inclusive range of I2C addresses that are never probed. + This parameter overrules 'normal' and 'probe', but not the 'force' lists. + +Also used is a list of pointers to sensors_force_data structures: + force_data: insmod parameters. A list, ending with an element of which + the force field is NULL. + Each element contains the type of chip and a list of pairs. + The first value is a bus number (SENSORS_ISA_BUS for the ISA bus, + -1 for any I2C bus), the second is the address. + These are automatically translated to insmod variables of the form + force_foo. + +So we have a generic insmod variabled `force', and chip-specific variables +`force_CHIPNAME'. + +Fortunately, as a module writer, you just have to define the `normal' +and/or `normal_range' parameters, and define what chip names are used. +The complete declaration could look like this: + /* Scan i2c addresses 0x20 to 0x2f, 0x37, and 0x40 to 0x4f + static unsigned short normal_i2c[] = {0x37,SENSORS_I2C_END}; + static unsigned short normal_i2c_range[] = {0x20,0x2f,0x40,0x4f, + SENSORS_I2C_END}; + /* Scan ISA address 0x290 */ + static unsigned int normal_isa[] = {0x0290,SENSORS_ISA_END}; + static unsigned int normal_isa_range[] = {SENSORS_ISA_END}; + + /* Define chips foo and bar, as well as all module parameters and things */ + SENSORS_INSMOD_2(foo,bar); + +If you have one chip, you use macro SENSORS_INSMOD_1(chip), if you have 2 +you use macro SENSORS_INSMOD_2(chip1,chip2), etc. If you do not want to +bother with chip types, you can use SENSORS_INSMOD_0. + +A enum is automatically defined as follows: + enum chips { any_chip, chip1, chip2, ... } + + +Attaching to an adapter +----------------------- + +Whenever a new adapter is inserted, or for all adapters if the driver is +being registered, the callback attach_adapter() is called. Now is the +time to determine what devices are present on the adapter, and to register +a client for each of them. + +The attach_adapter callback is really easy: we just call the generic +detection function. This function will scan the bus for us, using the +information as defined in the lists explained above. If a device is +detected at a specific address, another callback is called. + + int foo_attach_adapter(struct i2c_adapter *adapter) + { + return i2c_probe(adapter,&addr_data,&foo_detect_client); + } + +For `sensors' drivers, use the i2c_detect function instead: + + int foo_attach_adapter(struct i2c_adapter *adapter) + { + return i2c_detect(adapter,&addr_data,&foo_detect_client); + } + +Remember, structure `addr_data' is defined by the macros explained above, +so you do not have to define it yourself. + +The i2c_probe or i2c_detect function will call the foo_detect_client +function only for those i2c addresses that actually have a device on +them (unless a `force' parameter was used). In addition, addresses that +are already in use (by some other registered client) are skipped. + + +The detect client function +-------------------------- + +The detect client function is called by i2c_probe or i2c_detect. +The `kind' parameter contains 0 if this call is due to a `force' +parameter, and -1 otherwise (for i2c_detect, it contains 0 if +this call is due to the generic `force' parameter, and the chip type +number if it is due to a specific `force' parameter). + +Below, some things are only needed if this is a `sensors' driver. Those +parts are between /* SENSORS ONLY START */ and /* SENSORS ONLY END */ +markers. + +This function should only return an error (any value != 0) if there is +some reason why no more detection should be done anymore. If the +detection just fails for this address, return 0. + +For now, you can ignore the `flags' parameter. It is there for future use. + + int foo_detect_client(struct i2c_adapter *adapter, int address, + unsigned short flags, int kind) + { + int err = 0; + int i; + struct i2c_client *new_client; + struct foo_data *data; + const char *client_name = ""; /* For non-`sensors' drivers, put the real + name here! */ + + /* Let's see whether this adapter can support what we need. + Please substitute the things you need here! + For `sensors' drivers, add `! is_isa &&' to the if statement */ + if (!i2c_check_functionality(adapter,I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_WRITE_BYTE)) + goto ERROR0; + + /* SENSORS ONLY START */ + const char *type_name = ""; + int is_isa = i2c_is_isa_adapter(adapter); + + if (is_isa) { + + /* If this client can't be on the ISA bus at all, we can stop now + (call `goto ERROR0'). But for kicks, we will assume it is all + right. */ + + /* Discard immediately if this ISA range is already used */ + if (check_region(address,FOO_EXTENT)) + goto ERROR0; + + /* Probe whether there is anything on this address. + Some example code is below, but you will have to adapt this + for your own driver */ + + if (kind < 0) /* Only if no force parameter was used */ { + /* We may need long timeouts at least for some chips. */ + #define REALLY_SLOW_IO + i = inb_p(address + 1); + if (inb_p(address + 2) != i) + goto ERROR0; + if (inb_p(address + 3) != i) + goto ERROR0; + if (inb_p(address + 7) != i) + goto ERROR0; + #undef REALLY_SLOW_IO + + /* Let's just hope nothing breaks here */ + i = inb_p(address + 5) & 0x7f; + outb_p(~i & 0x7f,address+5); + if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) { + outb_p(i,address+5); + return 0; + } + } + } + + /* SENSORS ONLY END */ + + /* OK. For now, we presume we have a valid client. We now create the + client structure, even though we cannot fill it completely yet. + But it allows us to access several i2c functions safely */ + + /* Note that we reserve some space for foo_data too. If you don't + need it, remove it. We do it here to help to lessen memory + fragmentation. */ + if (! (new_client = kmalloc(sizeof(struct i2c_client) + + sizeof(struct foo_data), + GFP_KERNEL))) { + err = -ENOMEM; + goto ERROR0; + } + + /* This is tricky, but it will set the data to the right value. */ + client->data = new_client + 1; + data = (struct foo_data *) (client->data); + + new_client->addr = address; + new_client->data = data; + new_client->adapter = adapter; + new_client->driver = &foo_driver; + new_client->flags = 0; + + /* Now, we do the remaining detection. If no `force' parameter is used. */ + + /* First, the generic detection (if any), that is skipped if any force + parameter was used. */ + if (kind < 0) { + /* The below is of course bogus */ + if (foo_read(new_client,FOO_REG_GENERIC) != FOO_GENERIC_VALUE) + goto ERROR1; + } + + /* SENSORS ONLY START */ + + /* Next, specific detection. This is especially important for `sensors' + devices. */ + + /* Determine the chip type. Not needed if a `force_CHIPTYPE' parameter + was used. */ + if (kind <= 0) { + i = foo_read(new_client,FOO_REG_CHIPTYPE); + if (i == FOO_TYPE_1) + kind = chip1; /* As defined in the enum */ + else if (i == FOO_TYPE_2) + kind = chip2; + else { + printk("foo: Ignoring 'force' parameter for unknown chip at " + "adapter %d, address 0x%02x\n",i2c_adapter_id(adapter),address); + goto ERROR1; + } + } + + /* Now set the type and chip names */ + if (kind == chip1) { + type_name = "chip1"; /* For /proc entry */ + client_name = "CHIP 1"; + } else if (kind == chip2) { + type_name = "chip2"; /* For /proc entry */ + client_name = "CHIP 2"; + } + + /* Reserve the ISA region */ + if (is_isa) + request_region(address,FOO_EXTENT,type_name); + + /* SENSORS ONLY END */ + + /* Fill in the remaining client fields. */ + strcpy(new_client->name,client_name); + + /* SENSORS ONLY BEGIN */ + data->type = kind; + /* SENSORS ONLY END */ + + data->valid = 0; /* Only if you use this field */ + init_MUTEX(&data->update_lock); /* Only if you use this field */ + + /* Any other initializations in data must be done here too. */ + + /* Tell the i2c layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto ERROR3; + + /* SENSORS ONLY BEGIN */ + /* Register a new directory entry with module sensors. See below for + the `template' structure. */ + if ((i = i2c_register_entry(new_client, type_name, + foo_dir_table_template,THIS_MODULE)) < 0) { + err = i; + goto ERROR4; + } + data->sysctl_id = i; + + /* SENSORS ONLY END */ + + /* This function can write default values to the client registers, if + needed. */ + foo_init_client(new_client); + return 0; + + /* OK, this is not exactly good programming practice, usually. But it is + very code-efficient in this case. */ + + ERROR4: + i2c_detach_client(new_client); + ERROR3: + ERROR2: + /* SENSORS ONLY START */ + if (is_isa) + release_region(address,FOO_EXTENT); + /* SENSORS ONLY END */ + ERROR1: + kfree(new_client); + ERROR0: + return err; + } + + +Removing the client +=================== + +The detach_client call back function is called when a client should be +removed. It may actually fail, but only when panicking. This code is +much simpler than the attachment code, fortunately! + + int foo_detach_client(struct i2c_client *client) + { + int err,i; + + /* SENSORS ONLY START */ + /* Deregister with the `i2c-proc' module. */ + i2c_deregister_entry(((struct lm78_data *)(client->data))->sysctl_id); + /* SENSORS ONLY END */ + + /* Try to detach the client from i2c space */ + if ((err = i2c_detach_client(client))) { + printk("foo.o: Client deregistration failed, client not detached.\n"); + return err; + } + + /* SENSORS ONLY START */ + if i2c_is_isa_client(client) + release_region(client->addr,LM78_EXTENT); + /* SENSORS ONLY END */ + + kfree(client); /* Frees client data too, if allocated at the same time */ + return 0; + } + + +Initializing the module or kernel +================================= + +When the kernel is booted, or when your foo driver module is inserted, +you have to do some initializing. Fortunately, just attaching (registering) +the driver module is usually enough. + + /* Keep track of how far we got in the initialization process. If several + things have to initialized, and we fail halfway, only those things + have to be cleaned up! */ + static int __initdata foo_initialized = 0; + + static int __init foo_init(void) + { + int res; + printk("foo version %s (%s)\n",FOO_VERSION,FOO_DATE); + + if ((res = i2c_add_driver(&foo_driver))) { + printk("foo: Driver registration failed, module not inserted.\n"); + foo_cleanup(); + return res; + } + foo_initialized ++; + return 0; + } + + void foo_cleanup(void) + { + if (foo_initialized == 1) { + if ((res = i2c_del_driver(&foo_driver))) { + printk("foo: Driver registration failed, module not removed.\n"); + return; + } + foo_initialized --; + } + } + + /* Substitute your own name and email address */ + MODULE_AUTHOR("Frodo Looijaard " + MODULE_DESCRIPTION("Driver for Barf Inc. Foo I2C devices"); + + module_init(foo_init); + module_exit(foo_cleanup); + +Note that some functions are marked by `__init', and some data structures +by `__init_data'. Hose functions and structures can be removed after +kernel booting (or module loading) is completed. + +Command function +================ + +A generic ioctl-like function call back is supported. You will seldom +need this. You may even set it to NULL. + + /* No commands defined */ + int foo_command(struct i2c_client *client, unsigned int cmd, void *arg) + { + return 0; + } + + +Sending and receiving +===================== + +If you want to communicate with your device, there are several functions +to do this. You can find all of them in i2c.h. + +If you can choose between plain i2c communication and SMBus level +communication, please use the last. All adapters understand SMBus level +commands, but only some of them understand plain i2c! + + +Plain i2c communication +----------------------- + + extern int i2c_master_send(struct i2c_client *,const char* ,int); + extern int i2c_master_recv(struct i2c_client *,char* ,int); + +These routines read and write some bytes from/to a client. The client +contains the i2c address, so you do not have to include it. The second +parameter contains the bytes the read/write, the third the length of the +buffer. Returned is the actual number of bytes read/written. + + extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msg, + int num); + +This sends a series of messages. Each message can be a read or write, +and they can be mixed in any way. The transactions are combined: no +stop bit is sent between transaction. The i2c_msg structure contains +for each message the client address, the number of bytes of the message +and the message data itself. + +You can read the file `i2c-protocol' for more information about the +actual i2c protocol. + + +SMBus communication +------------------- + + extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, + unsigned short flags, + char read_write, u8 command, int size, + union i2c_smbus_data * data); + + This is the generic SMBus function. All functions below are implemented + in terms of it. Never use this function directly! + + + extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value); + extern s32 i2c_smbus_read_byte(struct i2c_client * client); + extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value); + extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command); + extern s32 i2c_smbus_write_byte_data(struct i2c_client * client, + u8 command, u8 value); + extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command); + extern s32 i2c_smbus_write_word_data(struct i2c_client * client, + u8 command, u16 value); + extern s32 i2c_smbus_write_block_data(struct i2c_client * client, + u8 command, u8 length, + u8 *values); + +These ones were removed in Linux 2.6.10 because they had no users, but could +be added back later if needed: + + extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client, + u8 command, u8 *values); + extern s32 i2c_smbus_read_block_data(struct i2c_client * client, + u8 command, u8 *values); + extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client, + u8 command, u8 length, + u8 *values); + extern s32 i2c_smbus_process_call(struct i2c_client * client, + u8 command, u16 value); + extern s32 i2c_smbus_block_process_call(struct i2c_client *client, + u8 command, u8 length, + u8 *values) + +All these transactions return -1 on failure. The 'write' transactions +return 0 on success; the 'read' transactions return the read value, except +for read_block, which returns the number of values read. The block buffers +need not be longer than 32 bytes. + +You can read the file `smbus-protocol' for more information about the +actual SMBus protocol. + + +General purpose routines +======================== + +Below all general purpose routines are listed, that were not mentioned +before. + + /* This call returns a unique low identifier for each registered adapter, + * or -1 if the adapter was not registered. + */ + extern int i2c_adapter_id(struct i2c_adapter *adap); + + +The sensors sysctl/proc interface +================================= + +This section only applies if you write `sensors' drivers. + +Each sensors driver creates a directory in /proc/sys/dev/sensors for each +registered client. The directory is called something like foo-i2c-4-65. +The sensors module helps you to do this as easily as possible. + +The template +------------ + +You will need to define a ctl_table template. This template will automatically +be copied to a newly allocated structure and filled in where necessary when +you call sensors_register_entry. + +First, I will give an example definition. + static ctl_table foo_dir_table_template[] = { + { FOO_SYSCTL_FUNC1, "func1", NULL, 0, 0644, NULL, &i2c_proc_real, + &i2c_sysctl_real,NULL,&foo_func }, + { FOO_SYSCTL_FUNC2, "func2", NULL, 0, 0644, NULL, &i2c_proc_real, + &i2c_sysctl_real,NULL,&foo_func }, + { FOO_SYSCTL_DATA, "data", NULL, 0, 0644, NULL, &i2c_proc_real, + &i2c_sysctl_real,NULL,&foo_data }, + { 0 } + }; + +In the above example, three entries are defined. They can either be +accessed through the /proc interface, in the /proc/sys/dev/sensors/* +directories, as files named func1, func2 and data, or alternatively +through the sysctl interface, in the appropriate table, with identifiers +FOO_SYSCTL_FUNC1, FOO_SYSCTL_FUNC2 and FOO_SYSCTL_DATA. + +The third, sixth and ninth parameters should always be NULL, and the +fourth should always be 0. The fifth is the mode of the /proc file; +0644 is safe, as the file will be owned by root:root. + +The seventh and eighth parameters should be &i2c_proc_real and +&i2c_sysctl_real if you want to export lists of reals (scaled +integers). You can also use your own function for them, as usual. +Finally, the last parameter is the call-back to gather the data +(see below) if you use the *_proc_real functions. + + +Gathering the data +------------------ + +The call back functions (foo_func and foo_data in the above example) +can be called in several ways; the operation parameter determines +what should be done: + + * If operation == SENSORS_PROC_REAL_INFO, you must return the + magnitude (scaling) in nrels_mag; + * If operation == SENSORS_PROC_REAL_READ, you must read information + from the chip and return it in results. The number of integers + to display should be put in nrels_mag; + * If operation == SENSORS_PROC_REAL_WRITE, you must write the + supplied information to the chip. nrels_mag will contain the number + of integers, results the integers themselves. + +The *_proc_real functions will display the elements as reals for the +/proc interface. If you set the magnitude to 2, and supply 345 for +SENSORS_PROC_REAL_READ, it would display 3.45; and if the user would +write 45.6 to the /proc file, it would be returned as 4560 for +SENSORS_PROC_REAL_WRITE. A magnitude may even be negative! + +An example function: + + /* FOO_FROM_REG and FOO_TO_REG translate between scaled values and + register values. Note the use of the read cache. */ + void foo_in(struct i2c_client *client, int operation, int ctl_name, + int *nrels_mag, long *results) + { + struct foo_data *data = client->data; + int nr = ctl_name - FOO_SYSCTL_FUNC1; /* reduce to 0 upwards */ + + if (operation == SENSORS_PROC_REAL_INFO) + *nrels_mag = 2; + else if (operation == SENSORS_PROC_REAL_READ) { + /* Update the readings cache (if necessary) */ + foo_update_client(client); + /* Get the readings from the cache */ + results[0] = FOO_FROM_REG(data->foo_func_base[nr]); + results[1] = FOO_FROM_REG(data->foo_func_more[nr]); + results[2] = FOO_FROM_REG(data->foo_func_readonly[nr]); + *nrels_mag = 2; + } else if (operation == SENSORS_PROC_REAL_WRITE) { + if (*nrels_mag >= 1) { + /* Update the cache */ + data->foo_base[nr] = FOO_TO_REG(results[0]); + /* Update the chip */ + foo_write_value(client,FOO_REG_FUNC_BASE(nr),data->foo_base[nr]); + } + if (*nrels_mag >= 2) { + /* Update the cache */ + data->foo_more[nr] = FOO_TO_REG(results[1]); + /* Update the chip */ + foo_write_value(client,FOO_REG_FUNC_MORE(nr),data->foo_more[nr]); + } + } + } -- cgit v1.2.1