From b9024cbc937df97987b139c6cf01e59369c5756d Mon Sep 17 00:00:00 2001 From: Naveen Krishna Ch Date: Sat, 22 Nov 2014 22:41:23 +0900 Subject: arm64: dts: Add initial device tree support for exynos7 Add initial device tree nodes for exynos7 SoC and board dts file to support espresso board based on exynos7 SoC. Signed-off-by: Naveen Krishna Ch Signed-off-by: Abhilash Kesavan Reviewed-by: Thomas Abraham Tested-by: Thomas Abraham Cc: Rob Herring Cc: Catalin Marinas Signed-off-by: Kukjin Kim --- arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/exynos/Makefile | 5 + arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 39 +++++ arch/arm64/boot/dts/exynos/exynos7.dtsi | 183 ++++++++++++++++++++++++ 4 files changed, 228 insertions(+) create mode 100644 arch/arm64/boot/dts/exynos/Makefile create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 3b8d427c3985..b4112518552f 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -2,6 +2,7 @@ dts-dirs += amd dts-dirs += apm dts-dirs += arm dts-dirs += cavium +dts-dirs += exynos always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile new file mode 100644 index 000000000000..20310e5b6d6f --- /dev/null +++ b/arch/arm64/boot/dts/exynos/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_EXYNOS7) += exynos7-espresso.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts new file mode 100644 index 000000000000..e2c828322687 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -0,0 +1,39 @@ +/* + * SAMSUNG Exynos7 Espresso board device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos7.dtsi" + +/ { + model = "Samsung Exynos7 Espresso board based on EXYNOS7"; + compatible = "samsung,exynos7-espresso", "samsung,exynos7"; + + aliases { + serial0 = &serial_2; + }; + + chosen { + linux,stdout-path = &serial_2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0x0 0xC0000000>; + }; +}; + +&fin_pll { + clock-frequency = <24000000>; +}; + +&serial_2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi new file mode 100644 index 000000000000..6d6a4c2e4dfb --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -0,0 +1,183 @@ +/* + * SAMSUNG EXYNOS7 SoC device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +/ { + compatible = "samsung,exynos7"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x0>; + enable-method = "psci"; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x1>; + enable-method = "psci"; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x2>; + enable-method = "psci"; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x3>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x18000000>; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + fin_pll: xxti { + compatible = "fixed-clock"; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + gic: interrupt-controller@11001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x11001000 0x1000>, + <0x11002000 0x1000>, + <0x11004000 0x2000>, + <0x11006000 0x2000>; + }; + + clock_topc: clock-controller@10570000 { + compatible = "samsung,exynos7-clock-topc"; + reg = <0x10570000 0x10000>; + #clock-cells = <1>; + }; + + clock_top0: clock-controller@105d0000 { + compatible = "samsung,exynos7-clock-top0"; + reg = <0x105d0000 0xb000>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>, + <&clock_topc DOUT_SCLK_BUS1_PLL>, + <&clock_topc DOUT_SCLK_CC_PLL>, + <&clock_topc DOUT_SCLK_MFC_PLL>; + clock-names = "fin_pll", "dout_sclk_bus0_pll", + "dout_sclk_bus1_pll", "dout_sclk_cc_pll", + "dout_sclk_mfc_pll"; + }; + + clock_peric0: clock-controller@13610000 { + compatible = "samsung,exynos7-clock-peric0"; + reg = <0x13610000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC0>, + <&clock_top0 CLK_SCLK_UART0>; + clock-names = "fin_pll", "dout_aclk_peric0_66", + "sclk_uart0"; + }; + + clock_peric1: clock-controller@14c80000 { + compatible = "samsung,exynos7-clock-peric1"; + reg = <0x14c80000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC1>, + <&clock_top0 CLK_SCLK_UART1>, + <&clock_top0 CLK_SCLK_UART2>, + <&clock_top0 CLK_SCLK_UART3>; + clock-names = "fin_pll", "dout_aclk_peric1_66", + "sclk_uart1", "sclk_uart2", "sclk_uart3"; + }; + + clock_peris: clock-controller@10040000 { + compatible = "samsung,exynos7-clock-peris"; + reg = <0x10040000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_PERIS>; + clock-names = "fin_pll", "dout_aclk_peris_66"; + }; + + serial_0: serial@13630000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13630000 0x100>; + interrupts = <0 440 0>; + clocks = <&clock_peric0 PCLK_UART0>, + <&clock_peric0 SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial_1: serial@14c20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x14c20000 0x100>; + interrupts = <0 456 0>; + clocks = <&clock_peric1 PCLK_UART1>, + <&clock_peric1 SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial_2: serial@14c30000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x14c30000 0x100>; + interrupts = <0 457 0>; + clocks = <&clock_peric1 PCLK_UART2>, + <&clock_peric1 SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial_3: serial@14c40000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x14c40000 0x100>; + interrupts = <0 458 0>; + clocks = <&clock_peric1 PCLK_UART3>, + <&clock_peric1 SCLK_UART3>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xff01>, + <1 14 0xff01>, + <1 11 0xff01>, + <1 10 0xff01>; + }; + }; +}; -- cgit v1.2.1 From f17a618b1e97b7f9b6e286e8a5c54d08a55564d9 Mon Sep 17 00:00:00 2001 From: Naveen Krishna Ch Date: Sat, 22 Nov 2014 22:41:33 +0900 Subject: arm64: dts: Add initial pinctrl support to exynos7 Add initial pin configuration nodes for exynos7 SoC. Signed-off-by: Naveen Krishna Ch Signed-off-by: Abhilash Kesavan Reviewed-by: Thomas Abraham Tested-by: Thomas Abraham Acked-by: Tomasz Figa Cc: Rob Herring Cc: Catalin Marinas Cc: Linus Walleij Signed-off-by: Kukjin Kim --- arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi | 588 ++++++++++++++++++++++++ arch/arm64/boot/dts/exynos/exynos7.dtsi | 66 +++ 2 files changed, 654 insertions(+) create mode 100644 arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi new file mode 100644 index 000000000000..2eef4a279131 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi @@ -0,0 +1,588 @@ +/* + * Samsung's Exynos7 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos7 SoC pin-mux and pin-config options are listed as + * device tree nodes in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +&pinctrl_alive { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa3: gpa3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_bus0 { + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd2: gpd2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd4: gpd4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd5: gpd5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd6: gpd6 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd7: gpd7 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd8: gpd8 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c10_bus: hs-i2c10-bus { + samsung,pins = "gpb0-1", "gpb0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c11_bus: hs-i2c11-bus { + samsung,pins = "gpb0-3", "gpb0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c2_bus: hs-i2c2-bus { + samsung,pins = "gpd0-3", "gpd0-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpd1-4", "gpd1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hs_i2c3_bus: hs-i2c3-bus { + samsung,pins = "gpd1-3", "gpd1-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hs_i2c0_bus: hs-i2c0-bus { + samsung,pins = "gpd2-1", "gpd2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c1_bus: hs-i2c1-bus { + samsung,pins = "gpd2-3", "gpd2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c9_bus: hs-i2c9-bus { + samsung,pins = "gpd2-7", "gpd2-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd2-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd2-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd2-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hs_i2c8_bus: hs-i2c8-bus { + samsung,pins = "gpd5-3", "gpd5-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpd5-0", "gpd5-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c4_bus: hs-i2c4-bus { + samsung,pins = "gpg3-1", "gpg3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c5_bus: hs-i2c5-bus { + samsung,pins = "gpg3-3", "gpg3-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_nfc { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c6_bus: hs-i2c6-bus { + samsung,pins = "gpj0-1", "gpj0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_touch { + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c7_bus: hs-i2c7-bus { + samsung,pins = "gpj1-1", "gpj1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_ff { + gpg4: gpg4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + spi3_bus: spi3-bus { + samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_ese { + gpv7: gpv7 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + spi4_bus: spi4-bus { + samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_fsys0 { + gpr4: gpr4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpr4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpr4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpr4-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpr4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; +}; + +&pinctrl_fsys1 { + gpr0: gpr0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr1: gpr1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr2: gpr2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr3: gpr3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpr0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpr0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_ds: sd0-ds { + samsung,pins = "gpr0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + + sd0_qrdy: sd0-qrdy { + samsung,pins = "gpr0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpr1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpr2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpr2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sd1_ds: sd1-ds { + samsung,pins = "gpr2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <6>; + }; + + sd1_qrdy: sd1-qrdy { + samsung,pins = "gpr2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <6>; + }; + + sd1_int: sd1-int { + samsung,pins = "gpr2-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <6>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpr3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <2>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <2>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <2>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 6d6a4c2e4dfb..22fb71c15c5f 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -17,6 +17,17 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_bus0; + pinctrl2 = &pinctrl_nfc; + pinctrl3 = &pinctrl_touch; + pinctrl4 = &pinctrl_ff; + pinctrl5 = &pinctrl_ese; + pinctrl6 = &pinctrl_fsys0; + pinctrl7 = &pinctrl_fsys1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -172,6 +183,59 @@ status = "disabled"; }; + pinctrl_alive: pinctrl@10580000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x10580000 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos7-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 16 0>; + }; + }; + + pinctrl_bus0: pinctrl@13470000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x13470000 0x1000>; + interrupts = <0 383 0>; + }; + + pinctrl_nfc: pinctrl@14cd0000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x14cd0000 0x1000>; + interrupts = <0 473 0>; + }; + + pinctrl_touch: pinctrl@14ce0000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x14ce0000 0x1000>; + interrupts = <0 474 0>; + }; + + pinctrl_ff: pinctrl@14c90000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x14c90000 0x1000>; + interrupts = <0 475 0>; + }; + + pinctrl_ese: pinctrl@14ca0000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x14ca0000 0x1000>; + interrupts = <0 476 0>; + }; + + pinctrl_fsys0: pinctrl@10e60000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x10e60000 0x1000>; + interrupts = <0 221 0>; + }; + + pinctrl_fsys1: pinctrl@15690000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x15690000 0x1000>; + interrupts = <0 203 0>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <1 13 0xff01>, @@ -181,3 +245,5 @@ }; }; }; + +#include "exynos7-pinctrl.dtsi" -- cgit v1.2.1 From 0a7d1d805d741a6ed36e13c1441ba1e24945e898 Mon Sep 17 00:00:00 2001 From: Abhilash Kesavan Date: Sat, 22 Nov 2014 22:41:40 +0900 Subject: arm64: dts: Add PMU DT node for exynos7 SoC Adds PMU DT node for exynos7 SoC. Signed-off-by: Abhilash Kesavan Signed-off-by: Kukjin Kim --- Documentation/devicetree/bindings/arm/samsung/pmu.txt | 1 + arch/arm64/boot/dts/exynos/exynos7.dtsi | 5 +++++ 2 files changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt index 1e1979b229ff..67b211381f2b 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt @@ -10,6 +10,7 @@ Properties: - "samsung,exynos5260-pmu" - for Exynos5260 SoC. - "samsung,exynos5410-pmu" - for Exynos5410 SoC, - "samsung,exynos5420-pmu" - for Exynos5420 SoC. + - "samsung,exynos7-pmu" - for Exynos7 SoC. second value must be always "syscon". - reg : offset and length of the register set. diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 22fb71c15c5f..8aab9f9c0cd8 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -243,6 +243,11 @@ <1 11 0xff01>, <1 10 0xff01>; }; + + pmu_system_controller: system-controller@105c0000 { + compatible = "samsung,exynos7-pmu", "syscon"; + reg = <0x105c0000 0x5000>; + }; }; }; -- cgit v1.2.1 From 6de6f73ce644d2274b5ff53387769ce86bd7413f Mon Sep 17 00:00:00 2001 From: Abhilash Kesavan Date: Sat, 22 Nov 2014 22:41:45 +0900 Subject: arm64: dts: Add nodes for mmc, i2c, rtc, watchdog, adc on exynos7 Add nodes for 3 mmc channels, 12 i2c channels, rtc, watchdog and adc on exynos7 SoC. Signed-off-by: Naveen Krishna Ch Signed-off-by: Abhilash Kesavan Signed-off-by: Kukjin Kim --- arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 45 ++++ arch/arm64/boot/dts/exynos/exynos7.dtsi | 276 ++++++++++++++++++++++++ 2 files changed, 321 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index e2c828322687..5424cc450f72 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -18,6 +18,8 @@ aliases { serial0 = &serial_2; + mshc0 = &mmc_0; + mshc2 = &mmc_2; }; chosen { @@ -37,3 +39,46 @@ &serial_2 { status = "okay"; }; + +&rtc { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + cap-mmc-highspeed; + non-removable; + card-detect-delay = <200>; + clock-frequency = <800000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>; + bus-width = <8>; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + cap-sd-highspeed; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + disable-wp; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 8aab9f9c0cd8..d7a37c3a6b52 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -113,6 +113,27 @@ "dout_sclk_mfc_pll"; }; + clock_top1: clock-controller@105e0000 { + compatible = "samsung,exynos7-clock-top1"; + reg = <0x105e0000 0xb000>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>, + <&clock_topc DOUT_SCLK_BUS1_PLL>, + <&clock_topc DOUT_SCLK_CC_PLL>, + <&clock_topc DOUT_SCLK_MFC_PLL>; + clock-names = "fin_pll", "dout_sclk_bus0_pll", + "dout_sclk_bus1_pll", "dout_sclk_cc_pll", + "dout_sclk_mfc_pll"; + }; + + clock_ccore: clock-controller@105b0000 { + compatible = "samsung,exynos7-clock-ccore"; + reg = <0x105b0000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_CCORE_133>; + clock-names = "fin_pll", "dout_aclk_ccore_133"; + }; + clock_peric0: clock-controller@13610000 { compatible = "samsung,exynos7-clock-peric0"; reg = <0x13610000 0xd00>; @@ -143,6 +164,27 @@ clock-names = "fin_pll", "dout_aclk_peris_66"; }; + clock_fsys0: clock-controller@10e90000 { + compatible = "samsung,exynos7-clock-fsys0"; + reg = <0x10e90000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS0_200>, + <&clock_top1 DOUT_SCLK_MMC2>; + clock-names = "fin_pll", "dout_aclk_fsys0_200", + "dout_sclk_mmc2"; + }; + + clock_fsys1: clock-controller@156e0000 { + compatible = "samsung,exynos7-clock-fsys1"; + reg = <0x156e0000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>, + <&clock_top1 DOUT_SCLK_MMC0>, + <&clock_top1 DOUT_SCLK_MMC1>; + clock-names = "fin_pll", "dout_aclk_fsys1_200", + "dout_sclk_mmc0", "dout_sclk_mmc1"; + }; + serial_0: serial@13630000 { compatible = "samsung,exynos4210-uart"; reg = <0x13630000 0x100>; @@ -236,6 +278,162 @@ interrupts = <0 203 0>; }; + hsi2c_0: hsi2c@13640000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13640000 0x1000>; + interrupts = <0 441 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c0_bus>; + clocks = <&clock_peric0 PCLK_HSI2C0>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_1: hsi2c@13650000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13650000 0x1000>; + interrupts = <0 442 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c1_bus>; + clocks = <&clock_peric0 PCLK_HSI2C1>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_2: hsi2c@14e60000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e60000 0x1000>; + interrupts = <0 459 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c2_bus>; + clocks = <&clock_peric1 PCLK_HSI2C2>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_3: hsi2c@14e70000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e70000 0x1000>; + interrupts = <0 460 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c3_bus>; + clocks = <&clock_peric1 PCLK_HSI2C3>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_4: hsi2c@13660000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13660000 0x1000>; + interrupts = <0 443 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c4_bus>; + clocks = <&clock_peric0 PCLK_HSI2C4>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_5: hsi2c@13670000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13670000 0x1000>; + interrupts = <0 444 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c5_bus>; + clocks = <&clock_peric0 PCLK_HSI2C5>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_6: hsi2c@14e00000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e00000 0x1000>; + interrupts = <0 461 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c6_bus>; + clocks = <&clock_peric1 PCLK_HSI2C6>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_7: hsi2c@13e10000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13e10000 0x1000>; + interrupts = <0 462 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c7_bus>; + clocks = <&clock_peric1 PCLK_HSI2C7>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_8: hsi2c@14e20000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e20000 0x1000>; + interrupts = <0 463 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c8_bus>; + clocks = <&clock_peric1 PCLK_HSI2C8>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_9: hsi2c@13680000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13680000 0x1000>; + interrupts = <0 445 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c9_bus>; + clocks = <&clock_peric0 PCLK_HSI2C9>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_10: hsi2c@13690000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13690000 0x1000>; + interrupts = <0 446 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c10_bus>; + clocks = <&clock_peric0 PCLK_HSI2C10>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_11: hsi2c@136a0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x136a0000 0x1000>; + interrupts = <0 447 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c11_bus>; + clocks = <&clock_peric0 PCLK_HSI2C11>; + clock-names = "hsi2c"; + status = "disabled"; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <1 13 0xff01>, @@ -248,6 +446,84 @@ compatible = "samsung,exynos7-pmu", "syscon"; reg = <0x105c0000 0x5000>; }; + + rtc: rtc@10590000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10590000 0x100>; + interrupts = <0 355 0>, <0 356 0>; + clocks = <&clock_ccore PCLK_RTC>; + clock-names = "rtc"; + status = "disabled"; + }; + + watchdog: watchdog@101d0000 { + compatible = "samsung,exynos7-wdt"; + reg = <0x101d0000 0x100>; + interrupts = <0 110 0>; + clocks = <&clock_peris PCLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; + + mmc_0: mmc@15740000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <0 201 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15740000 0x2000>; + clocks = <&clock_fsys1 ACLK_MMC0>, + <&clock_top1 CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mmc_1: mmc@15750000 { + compatible = "samsung,exynos7-dw-mshc"; + interrupts = <0 202 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15750000 0x2000>; + clocks = <&clock_fsys1 ACLK_MMC1>, + <&clock_top1 CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mmc_2: mmc@15560000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <0 216 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15560000 0x2000>; + clocks = <&clock_fsys0 ACLK_MMC2>, + <&clock_top1 CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + adc: adc@13620000 { + compatible = "samsung,exynos7-adc"; + reg = <0x13620000 0x100>; + interrupts = <0 448 0>; + clocks = <&clock_peric0 PCLK_ADCIF>; + clock-names = "adc"; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + + pwm: pwm@136c0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x136c0000 0x100>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + #pwm-cells = <3>; + clocks = <&clock_peric0 PCLK_PWM>; + clock-names = "timers"; + }; }; }; -- cgit v1.2.1 From 6f56eef1f9aba3747c811780a4768618167d5c97 Mon Sep 17 00:00:00 2001 From: Alim Akhtar Date: Sat, 22 Nov 2014 22:41:52 +0900 Subject: arm64: Enable ARMv8 based exynos7 SoC support This patch adds the necessary Kconfig entries to enable support for the ARMv8 based exynos7 SoC. It also enables RTC, WDT and Pinctrl for exynos7 SoC. Signed-off-by: Alim Akhtar Signed-off-by: Naveen Krishna Ch Signed-off-by: Abhilash Kesavan Reviewed-by: Thomas Abraham Tested-by: Thomas Abraham Cc: Rob Herring Cc: Catalin Marinas Signed-off-by: Kukjin Kim --- arch/arm64/Kconfig | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index b1f9a20a3677..15e8e7469ffd 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -148,6 +148,23 @@ source "kernel/Kconfig.freezer" menu "Platform selection" +config ARCH_EXYNOS + bool + help + This enables support for Samsung Exynos SoC family + +config ARCH_EXYNOS7 + bool "ARMv8 based Samsung Exynos7" + select ARCH_EXYNOS + select COMMON_CLK_SAMSUNG + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS + select PINCTRL + select PINCTRL_EXYNOS + + help + This enables support for Samsung Exynos7 SoC family + config ARCH_SEATTLE bool "AMD Seattle SoC Family" help -- cgit v1.2.1 From d035fdfa27ac124bc8f94c3d7dc82ad069802170 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 7 Jan 2015 01:17:33 -0700 Subject: arm64: Add Tegra132 support Add basic Kbuild support for the Tegra SoC family, and specifically, the Tegra132 SoC. Tegra132 pairs the NVIDIA Denver CPU complex with the SoC integration of Tegra124 - hence the use of ARCH_TEGRA and the Tegra124 pinctrl option. This patch was based on a patch originally written by Allen Martin . Signed-off-by: Paul Walmsley Cc: Paul Walmsley Cc: Allen Martin Cc: Thierry Reding Cc: Catalin Marinas Cc: Will Deacon Cc: Mark Rutland Signed-off-by: Thierry Reding --- arch/arm64/Kconfig | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index b1f9a20a3677..cb2da11c16dc 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -153,6 +153,34 @@ config ARCH_SEATTLE help This enables support for AMD Seattle SOC Family +config ARCH_TEGRA + bool "NVIDIA Tegra SoC Family" + select ARCH_HAS_RESET_CONTROLLER + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select CLKSRC_OF + select GENERIC_CLOCKEVENTS + select HAVE_CLK + select HAVE_SMP + select PINCTRL + select RESET_CONTROLLER + help + This enables support for the NVIDIA Tegra SoC family. + +config ARCH_TEGRA_132_SOC + bool "NVIDIA Tegra132 SoC" + depends on ARCH_TEGRA + select PINCTRL_TEGRA124 + select USB_ARCH_HAS_EHCI if USB_SUPPORT + select USB_ULPI if USB_PHY + select USB_ULPI_VIEWPORT if USB_PHY + help + Enable support for NVIDIA Tegra132 SoC, based on the Denver + ARMv8 CPU. The Tegra132 SoC is similar to the Tegra124 SoC, + but contains an NVIDIA Denver CPU complex in place of + Tegra124's "4+1" Cortex-A15 CPU complex. + config ARCH_THUNDER bool "Cavium Inc. Thunder SoC Family" help -- cgit v1.2.1 From 83af225c3989cab7ba747b52c445b93660410334 Mon Sep 17 00:00:00 2001 From: Eddie Huang Date: Tue, 1 Dec 2015 10:14:00 +0100 Subject: Document: DT: Add bindings for mediatek MT8173 SoC Platform MT8173 is a 64-bit four core Soc. And mt8173-evb is a evaluation board based on mt8173. This commit add the devicetree binding document for mediatek MT8173 SoC MT8173 sysirq MT8173 uart Signed-off-by: Eddie Huang Acked-by: Arnd Bergmann Signed-off-by: Matthias Brugger --- Documentation/devicetree/bindings/arm/mediatek.txt | 4 ++++ Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt | 1 + Documentation/devicetree/bindings/serial/mtk-uart.txt | 4 +++- 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt index 3be40139cfbb..dd7550a29db6 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.txt +++ b/Documentation/devicetree/bindings/arm/mediatek.txt @@ -9,6 +9,7 @@ compatible: Must contain one of "mediatek,mt6592" "mediatek,mt8127" "mediatek,mt8135" + "mediatek,mt8173" Supported boards: @@ -25,3 +26,6 @@ Supported boards: - MTK mt8135 tablet EVB: Required root node properties: - compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135"; +- MTK mt8173 tablet EVB: + Required root node properties: + - compatible = "mediatek,mt8173-evb", "mediatek,mt8173"; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt index d680b07ec6e8..8794f8d14db5 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt @@ -5,6 +5,7 @@ interrupt. Required properties: - compatible: should be one of: + "mediatek,mt8173-sysirq" "mediatek,mt8135-sysirq" "mediatek,mt8127-sysirq" "mediatek,mt6589-sysirq" diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index 48358a33ea7d..0e41b6ef2950 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -2,9 +2,11 @@ Required properties: - compatible should contain: + * "mediatek,mt8173-uart" for MT8173 compatible UARTS * "mediatek,mt6589-uart" for MT6589 compatible UARTS * "mediatek,mt6582-uart" for MT6582 compatible UARTS - * "mediatek,mt6577-uart" for all compatible UARTS (MT6589, MT6582, MT6577) + * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6589, MT6582, + MT6577) - reg: The base address of the UART register bank. -- cgit v1.2.1 From b3a37248415716663ea2d752da4a5f765fc87442 Mon Sep 17 00:00:00 2001 From: Eddie Huang Date: Tue, 1 Dec 2015 10:14:00 +0100 Subject: arm64: dts: Add mediatek MT8173 SoC and evaluation board dts and Makefile Add device tree support for MT8173 SoC and evaluation board based on it. Signed-off-by: Eddie Huang Acked-by: Arnd Bergmann Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/mediatek/Makefile | 5 + arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 38 +++++++ arch/arm64/boot/dts/mediatek/mt8173.dtsi | 168 ++++++++++++++++++++++++++++ 4 files changed, 212 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/Makefile create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-evb.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8173.dtsi diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 3b8d427c3985..89124e4d5c4c 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -2,6 +2,7 @@ dts-dirs += amd dts-dirs += apm dts-dirs += arm dts-dirs += cavium +dts-dirs += mediatek always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile new file mode 100644 index 000000000000..3ce24622b231 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts new file mode 100644 index 000000000000..43d54017b779 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Eddie Huang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt8173.dtsi" + +/ { + model = "mediatek,mt8173-evb"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + chosen { }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi new file mode 100644 index 000000000000..8554ec31dd9e --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -0,0 +1,168 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Eddie Huang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include + +/ { + compatible = "mediatek,mt8173"; + interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu2>; + }; + core1 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x001>; + enable-method = "psci"; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x100>; + enable-method = "psci"; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x101>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000001>; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; + }; + + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + sysirq: intpol-controller@10200620 { + compatible = "mediatek,mt8173-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200620 0 0x20>; + }; + + gic: interrupt-controller@10220000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x10221000 0 0x1000>, + <0 0x10222000 0 0x2000>, + <0 0x10224000 0 0x2000>, + <0 0x10226000 0 0x2000>; + interrupts = ; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt8173-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = ; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt8173-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = ; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt8173-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = ; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart3: serial@11005000 { + compatible = "mediatek,mt8173-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x400>; + interrupts = ; + clocks = <&uart_clk>; + status = "disabled"; + }; + }; + +}; + -- cgit v1.2.1 From 4727a6f631bf3ab2a0373acd27d40483446fcb8a Mon Sep 17 00:00:00 2001 From: Eddie Huang Date: Tue, 1 Dec 2015 10:14:00 +0100 Subject: arm64: mediatek: Add MT8173 SoC Kconfig and defconfig Add MT8173 arm64 Kconfig and defconfig files Signed-off-by: Eddie Huang Acked-by: Arnd Bergmann Signed-off-by: Matthias Brugger --- arch/arm64/Kconfig | 6 ++++++ arch/arm64/configs/defconfig | 2 ++ 2 files changed, 8 insertions(+) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index b1f9a20a3677..e627eadd357b 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -148,6 +148,12 @@ source "kernel/Kconfig.freezer" menu "Platform selection" +config ARCH_MEDIATEK + bool "Mediatek MT65xx & MT81xx ARMv8 SoC" + select ARM_GIC + help + Support for Mediatek MT65xx & MT81xx ARMv8 SoCs + config ARCH_SEATTLE bool "AMD Seattle SoC Family" help diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index dd301be89ecc..ed84d2155827 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -32,6 +32,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set +CONFIG_ARCH_MEDIATEK=y CONFIG_ARCH_THUNDER=y CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_XGENE=y @@ -87,6 +88,7 @@ CONFIG_SERIO_AMBAKMI=y CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y -- cgit v1.2.1 From 747c84d051949872be54fcbceb5174b5779c6a17 Mon Sep 17 00:00:00 2001 From: Bhupesh Sharma Date: Sun, 25 Jan 2015 02:42:52 +0530 Subject: arm64: Add DTS support for FSL's LS2085A SoC This patch adds the device tree support for FSL LS2085A SoC based on ARMv8 architecture. Following levels of DTSI/DTS files have been created for the LS2085A SoC family: - fsl-ls2085a.dtsi: DTS-Include file for FSL LS2085A SoC. - fsl-ls2085a-simu.dts: DTS file for FSL LS2085a software simulator model. In addition, this patch adds build support for FSL's LS2085A simulator model in arm64 dts Makefile. Signed-off-by: Bhupesh Sharma Signed-off-by: Arnab Basu Signed-off-by: Stuart Yoder Signed-off-by: Olof Johansson --- arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/freescale/Makefile | 5 + arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts | 65 ++++++++ arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi | 163 +++++++++++++++++++++ 4 files changed, 234 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/Makefile create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index b4112518552f..68633e24e544 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -3,6 +3,7 @@ dts-dirs += apm dts-dirs += arm dts-dirs += cavium dts-dirs += exynos +dts-dirs += freescale always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile new file mode 100644 index 000000000000..4f2de3e789ee --- /dev/null +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_FSL_LS2085A) += fsl-ls2085a-simu.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts new file mode 100644 index 000000000000..82e2a6fccc64 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts @@ -0,0 +1,65 @@ +/* + * Device Tree file for Freescale LS2085a software Simulator model + * + * Copyright (C) 2014, Freescale Semiconductor + * + * Bhupesh Sharma + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +/include/ "fsl-ls2085a.dtsi" + +/ { + model = "Freescale Layerscape 2085a software Simulator model"; + compatible = "fsl,ls2085a-simu", "fsl,ls2085a"; + + ethernet@2210000 { + compatible = "smsc,lan91c111"; + reg = <0x0 0x2210000 0x0 0x100>; + interrupts = <0 58 0x1>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi new file mode 100644 index 000000000000..e281ceb338c3 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi @@ -0,0 +1,163 @@ +/* + * Device Tree Include file for Freescale Layerscape-2085A family SoC. + * + * Copyright (C) 2014, Freescale Semiconductor + * + * Bhupesh Sharma + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + compatible = "fsl,ls2085a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + /* + * We expect the enable-method for cpu's to be "psci", but this + * is dependent on the SoC FW, which will fill this in. + * + * Currently supported enable-method is psci v0.2 + */ + + /* We have 4 clusters having 2 Cortex-A57 cores each */ + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x1>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + }; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x200>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x201>; + }; + + cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x300>; + }; + + cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x301>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + /* DRAM space - 1, size : 2 GB DRAM */ + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <1 9 0x4>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ + <1 14 0x8>, /* Physical Non-Secure PPI, active-low */ + <1 11 0x8>, /* Virtual PPI, active-low */ + <1 10 0x8>; /* Hypervisor PPI, active-low */ + }; + + serial0: serial@21c0500 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + clock-frequency = <0>; /* Updated by bootloader */ + interrupts = <0 32 0x1>; /* edge triggered */ + }; + + serial1: serial@21c0600 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + clock-frequency = <0>; /* Updated by bootloader */ + interrupts = <0 32 0x1>; /* edge triggered */ + }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + }; +}; -- cgit v1.2.1 From b288ca404761e65b1a5efab13719a16cee3a3032 Mon Sep 17 00:00:00 2001 From: Bhupesh Sharma Date: Sun, 25 Jan 2015 02:42:53 +0530 Subject: arm64: Add support for FSL's LS2085A SoC in Kconfig and defconfig This patch adds support for FSL's LS2085A SoC in the arm64 Kconfig and defconfig files. Signed-off-by: Bhupesh Sharma Signed-off-by: Arnab Basu Signed-off-by: Olof Johansson --- arch/arm64/Kconfig | 5 +++++ arch/arm64/configs/defconfig | 1 + 2 files changed, 6 insertions(+) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 84850c6cab20..9c6b93c86522 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -198,6 +198,11 @@ config ARCH_TEGRA_132_SOC but contains an NVIDIA Denver CPU complex in place of Tegra124's "4+1" Cortex-A15 CPU complex. +config ARCH_FSL_LS2085A + bool "Freescale LS2085A SOC" + help + This enables support for Freescale LS2085A SOC. + config ARCH_THUNDER bool "Cavium Inc. Thunder SoC Family" help diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 5376d908eabe..24c23341a181 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -31,6 +31,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set +CONFIG_ARCH_FSL_LS2085A=y CONFIG_ARCH_THUNDER=y CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_XGENE=y -- cgit v1.2.1 From 5118a6a310e22373b61f8fa55762b8273b43eea8 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 27 Jan 2015 16:19:11 -0800 Subject: arm64: Fix sort of platform Kconfig entries Signed-off-by: Olof Johansson --- arch/arm64/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 0d0c01c35dc3..5cc71e2abf95 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -165,6 +165,11 @@ config ARCH_EXYNOS7 help This enables support for Samsung Exynos7 SoC family +config ARCH_FSL_LS2085A + bool "Freescale LS2085A SOC" + help + This enables support for Freescale LS2085A SOC. + config ARCH_MEDIATEK bool "Mediatek MT65xx & MT81xx ARMv8 SoC" select ARM_GIC @@ -204,11 +209,6 @@ config ARCH_TEGRA_132_SOC but contains an NVIDIA Denver CPU complex in place of Tegra124's "4+1" Cortex-A15 CPU complex. -config ARCH_FSL_LS2085A - bool "Freescale LS2085A SOC" - help - This enables support for Freescale LS2085A SOC. - config ARCH_THUNDER bool "Cavium Inc. Thunder SoC Family" help -- cgit v1.2.1 From 0d2fdcd76504535bd1721ba9e8d4d03bcbb10afd Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 29 Jan 2015 15:42:45 +0000 Subject: arm64: Kconfig: clean up two no-op Kconfig options from CONFIG_ARCH_TEGRA* Paul Bolle pointed out that commit d035fdfa27ac124bc8f94c3d7dc82ad069802170 ("arm64: Add Tegra132 support") included two Kconfig symbols that are now no-ops: USB_ARCH_HAS_EHCI and HAVE_SMP. So, drop the two symbols. This second version corrects a thinko in Paul Bolle's E-mail address. Signed-off-by: Paul Walmsley Cc: Paul Walmsley Cc: Allen Martin Cc: Thierry Reding Cc: Catalin Marinas Cc: Will Deacon Cc: Mark Rutland Cc: Paul Bolle Signed-off-by: Olof Johansson --- arch/arm64/Kconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 5cc71e2abf95..5122974163da 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -190,7 +190,6 @@ config ARCH_TEGRA select CLKSRC_OF select GENERIC_CLOCKEVENTS select HAVE_CLK - select HAVE_SMP select PINCTRL select RESET_CONTROLLER help @@ -200,7 +199,6 @@ config ARCH_TEGRA_132_SOC bool "NVIDIA Tegra132 SoC" depends on ARCH_TEGRA select PINCTRL_TEGRA124 - select USB_ARCH_HAS_EHCI if USB_SUPPORT select USB_ULPI if USB_PHY select USB_ULPI_VIEWPORT if USB_PHY help -- cgit v1.2.1