delta/linux.git/include/linux/kdb.h, branch proc-cmdline git.kernel.org: pub/scm/linux/kernel/git/torvalds/linux.git kdb: call vkdb_printf() from vprintk_default() only when wanted 2016-12-15T00:04:08+00:00 Petr Mladek pmladek@suse.com 2016-12-14T23:05:58+00:00 34aaff40b42148b23dcde40152480e25c7d2d759 kdb_trap_printk allows to pass normal printk() messages to kdb via vkdb_printk(). For example, it is used to get backtrace using the classic show_stack(), see kdb_show_stack(). vkdb_printf() tries to avoid a potential infinite loop by disabling the trap. But this approach is racy, for example: CPU1 CPU2 vkdb_printf() // assume that kdb_trap_printk == 0 saved_trap_printk = kdb_trap_printk; kdb_trap_printk = 0; kdb_show_stack() kdb_trap_printk++; Problem1: Now, a nested printk() on CPU0 calls vkdb_printf() even when it should have been disabled. It will not cause a deadlock but... // using the outdated saved value: 0 kdb_trap_printk = saved_trap_printk; kdb_trap_printk--; Problem2: Now, kdb_trap_printk == -1 and will stay like this. It means that all messages will get passed to kdb from now on. This patch removes the racy saved_trap_printk handling. Instead, the recursion is prevented by a check for the locked CPU. The solution is still kind of racy. A non-related printk(), from another process, might get trapped by vkdb_printf(). And the wanted printk() might not get trapped because kdb_printf_cpu is assigned. But this problem existed even with the original code. A proper solution would be to get_cpu() before setting kdb_trap_printk and trap messages only from this CPU. I am not sure if it is worth the effort, though. In fact, the race is very theoretical. When kdb is running any of the commands that use kdb_trap_printk there is a single active CPU and the other CPUs should be in a holding pen inside kgdb_cpu_enter(). The only time this is violated is when there is a timeout waiting for the other CPUs to report to the holding pen. Finally, note that the situation is a bit schizophrenic. vkdb_printf() explicitly allows recursion but only from KDB code that calls kdb_printf() directly. On the other hand, the generic printk() recursion is not allowed because it might cause an infinite loop. This is why we could not hide the decision inside vkdb_printf() easily. Link: http://lkml.kernel.org/r/1480412276-16690-4-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
kdb_trap_printk allows to pass normal printk() messages to kdb via
vkdb_printk().  For example, it is used to get backtrace using the
classic show_stack(), see kdb_show_stack().

vkdb_printf() tries to avoid a potential infinite loop by disabling the
trap.  But this approach is racy, for example:

CPU1					CPU2

vkdb_printf()
  // assume that kdb_trap_printk == 0
  saved_trap_printk = kdb_trap_printk;
  kdb_trap_printk = 0;

					kdb_show_stack()
					  kdb_trap_printk++;

Problem1: Now, a nested printk() on CPU0 calls vkdb_printf()
	  even when it should have been disabled. It will not
	  cause a deadlock but...

   // using the outdated saved value: 0
   kdb_trap_printk = saved_trap_printk;

					  kdb_trap_printk--;

Problem2: Now, kdb_trap_printk == -1 and will stay like this.
   It means that all messages will get passed to kdb from
   now on.

This patch removes the racy saved_trap_printk handling.  Instead, the
recursion is prevented by a check for the locked CPU.

The solution is still kind of racy.  A non-related printk(), from
another process, might get trapped by vkdb_printf().  And the wanted
printk() might not get trapped because kdb_printf_cpu is assigned.  But
this problem existed even with the original code.

A proper solution would be to get_cpu() before setting kdb_trap_printk
and trap messages only from this CPU.  I am not sure if it is worth the
effort, though.

In fact, the race is very theoretical.  When kdb is running any of the
commands that use kdb_trap_printk there is a single active CPU and the
other CPUs should be in a holding pen inside kgdb_cpu_enter().

The only time this is violated is when there is a timeout waiting for
the other CPUs to report to the holding pen.

Finally, note that the situation is a bit schizophrenic.  vkdb_printf()
explicitly allows recursion but only from KDB code that calls
kdb_printf() directly.  On the other hand, the generic printk()
recursion is not allowed because it might cause an infinite loop.  This
is why we could not hide the decision inside vkdb_printf() easily.

Link: http://lkml.kernel.org/r/1480412276-16690-4-git-send-email-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kdb: remove unused kdb_event handling 2016-12-15T00:04:08+00:00 Petr Mladek pmladek@suse.com 2016-12-14T23:05:52+00:00 d1bd8ead126668a2d6c42d97cc3664e95b3fa1dc kdb_event state variable is only set but never checked in the kernel code. http://www.spinics.net/lists/kdb/msg01733.html suggests that this variable affected WARN_CONSOLE_UNLOCKED() in the original implementation. But this check never went upstream. The semantic is unclear and racy. The value is updated after the kdb_printf_lock is acquired and after it is released. It should be symmetric at minimum. The value should be manipulated either inside or outside the locked area. Fortunately, it seems that the original function is gone and we could simply remove the state variable. Link: http://lkml.kernel.org/r/1480412276-16690-2-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Suggested-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
kdb_event state variable is only set but never checked in the kernel
code.

http://www.spinics.net/lists/kdb/msg01733.html suggests that this
variable affected WARN_CONSOLE_UNLOCKED() in the original
implementation.  But this check never went upstream.

The semantic is unclear and racy.  The value is updated after the
kdb_printf_lock is acquired and after it is released.  It should be
symmetric at minimum.  The value should be manipulated either inside or
outside the locked area.

Fortunately, it seems that the original function is gone and we could
simply remove the state variable.

Link: http://lkml.kernel.org/r/1480412276-16690-2-git-send-email-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kdb: use task_cpu() instead of task_thread_info()->cpu 2016-07-28T23:07:41+00:00 Andy Lutomirski luto@kernel.org 2016-07-28T22:48:20+00:00 e558af65be65713ef2e8b2aa637c6263caeed172 We'll need this cleanup to make the cpu field in thread_info be optional. Link: http://lkml.kernel.org/r/da298328dc77ea494576c2f20a934218e758a6fa.1468523549.git.luto@kernel.org Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
We'll need this cleanup to make the cpu field in thread_info be
optional.

Link: http://lkml.kernel.org/r/da298328dc77ea494576c2f20a934218e758a6fa.1468523549.git.luto@kernel.org
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kdb: Avoid printing KERN_ levels to consoles 2015-02-19T18:39:02+00:00 Daniel Thompson daniel.thompson@linaro.org 2014-11-07T18:37:57+00:00 f7d4ca8bbfda23b4f1eae9b6757ff64166b093d5 Currently when kdb traps printk messages then the raw log level prefix (consisting of '\001' followed by a numeral) does not get stripped off before the message is issued to the various I/O handlers supported by kdb. This causes annoying visual noise as well as causing problems grepping for ^. It is also a change of behaviour compared to normal usage of printk() usage. For example <SysRq>-h ends up with different output to that of kdb's "sr h". This patch addresses the problem by stripping log levels from messages before they are issued to the I/O handlers. printk() which can also act as an i/o handler in some cases is special cased; if the caller provided a log level then the prefix will be preserved when sent to printk(). The addition of non-printable characters to the output of kdb commands is a regression, albeit and extremely elderly one, introduced by commit 04d2c8c83d0e ("printk: convert the format for KERN_<LEVEL> to a 2 byte pattern"). Note also that this patch does *not* restore the original behaviour from v3.5. Instead it makes printk() from within a kdb command display the message without any prefix (i.e. like printk() normally does). Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Joe Perches <joe@perches.com> Cc: stable@vger.kernel.org Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 
Currently when kdb traps printk messages then the raw log level prefix
(consisting of '\001' followed by a numeral) does not get stripped off
before the message is issued to the various I/O handlers supported by
kdb. This causes annoying visual noise as well as causing problems
grepping for ^. It is also a change of behaviour compared to normal usage
of printk() usage. For example <SysRq>-h ends up with different output to
that of kdb's "sr h".

This patch addresses the problem by stripping log levels from messages
before they are issued to the I/O handlers. printk() which can also
act as an i/o handler in some cases is special cased; if the caller
provided a log level then the prefix will be preserved when sent to
printk().

The addition of non-printable characters to the output of kdb commands is a
regression, albeit and extremely elderly one, introduced by commit
04d2c8c83d0e ("printk: convert the format for KERN_<LEVEL> to a 2 byte
pattern"). Note also that this patch does *not* restore the original
behaviour from v3.5. Instead it makes printk() from within a kdb command
display the message without any prefix (i.e. like printk() normally does).

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Joe Perches <joe@perches.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
kdb: Add enable mask for groups of commands 2014-11-11T15:31:52+00:00 Anton Vorontsov anton.vorontsov@linaro.org 2014-11-06T14:36:46+00:00 420c2b1b0df84f5956036b5185cc1e11d247817d Currently all kdb commands are enabled whenever kdb is deployed. This makes it difficult to deploy kdb to help debug certain types of systems. Android phones provide one example; the FIQ debugger found on some Android devices has a deliberately weak set of commands to allow the debugger to enabled very late in the production cycle. Certain kiosk environments offer another interesting case where an engineer might wish to probe the system state using passive inspection commands without providing sufficient power for a passer by to root it. Without any restrictions, obtaining the root rights via KDB is a matter of a few commands, and works everywhere. For example, log in as a normal user: cbou:~$ id uid=1001(cbou) gid=1001(cbou) groups=1001(cbou) Now enter KDB (for example via sysrq): Entering kdb (current=0xffff8800065bc740, pid 920) due to Keyboard Entry kdb> ps 23 sleeping system daemon (state M) processes suppressed, use 'ps A' to see all. Task Addr Pid Parent [*] cpu State Thread Command 0xffff8800065bc740 920 919 1 0 R 0xffff8800065bca20 *bash 0xffff880007078000 1 0 0 0 S 0xffff8800070782e0 init [...snip...] 0xffff8800065be3c0 918 1 0 0 S 0xffff8800065be6a0 getty 0xffff8800065b9c80 919 1 0 0 S 0xffff8800065b9f60 login 0xffff8800065bc740 920 919 1 0 R 0xffff8800065bca20 *bash All we need is the offset of cred pointers. We can look up the offset in the distro's kernel source, but it is unnecessary. We can just start dumping init's task_struct, until we see the process name: kdb> md 0xffff880007078000 0xffff880007078000 0000000000000001 ffff88000703c000 ................ 0xffff880007078010 0040210000000002 0000000000000000 .....!@......... [...snip...] 0xffff8800070782b0 ffff8800073e0580 ffff8800073e0580 ..>.......>..... 0xffff8800070782c0 0000000074696e69 0000000000000000 init............ ^ Here, 'init'. Creds are just above it, so the offset is 0x02b0. Now we set up init's creds for our non-privileged shell: kdb> mm 0xffff8800065bc740+0x02b0 0xffff8800073e0580 0xffff8800065bc9f0 = 0xffff8800073e0580 kdb> mm 0xffff8800065bc740+0x02b8 0xffff8800073e0580 0xffff8800065bc9f8 = 0xffff8800073e0580 And thus gaining the root: kdb> go cbou:~$ id uid=0(root) gid=0(root) groups=0(root) cbou:~$ bash root:~# p.s. No distro enables kdb by default (although, with a nice KDB-over-KMS feature availability, I would expect at least some would enable it), so it's not actually some kind of a major issue. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 
Currently all kdb commands are enabled whenever kdb is deployed. This
makes it difficult to deploy kdb to help debug certain types of
systems.

Android phones provide one example; the FIQ debugger found on some
Android devices has a deliberately weak set of commands to allow the
debugger to enabled very late in the production cycle.

Certain kiosk environments offer another interesting case where an
engineer might wish to probe the system state using passive inspection
commands without providing sufficient power for a passer by to root it.

Without any restrictions, obtaining the root rights via KDB is a matter of
a few commands, and works everywhere. For example, log in as a normal
user:

cbou:~$ id
uid=1001(cbou) gid=1001(cbou) groups=1001(cbou)

Now enter KDB (for example via sysrq):

Entering kdb (current=0xffff8800065bc740, pid 920) due to Keyboard Entry
kdb> ps
23 sleeping system daemon (state M) processes suppressed,
use 'ps A' to see all.
Task Addr               Pid   Parent [*] cpu State Thread             Command
0xffff8800065bc740      920      919  1    0   R  0xffff8800065bca20 *bash

0xffff880007078000        1        0  0    0   S  0xffff8800070782e0  init
[...snip...]
0xffff8800065be3c0      918        1  0    0   S  0xffff8800065be6a0  getty
0xffff8800065b9c80      919        1  0    0   S  0xffff8800065b9f60  login
0xffff8800065bc740      920      919  1    0   R  0xffff8800065bca20 *bash

All we need is the offset of cred pointers. We can look up the offset in
the distro's kernel source, but it is unnecessary. We can just start
dumping init's task_struct, until we see the process name:

kdb> md 0xffff880007078000
0xffff880007078000 0000000000000001 ffff88000703c000   ................
0xffff880007078010 0040210000000002 0000000000000000   .....!@.........
[...snip...]
0xffff8800070782b0 ffff8800073e0580 ffff8800073e0580   ..>.......>.....
0xffff8800070782c0 0000000074696e69 0000000000000000   init............

^ Here, 'init'. Creds are just above it, so the offset is 0x02b0.

Now we set up init's creds for our non-privileged shell:

kdb> mm 0xffff8800065bc740+0x02b0 0xffff8800073e0580
0xffff8800065bc9f0 = 0xffff8800073e0580
kdb> mm 0xffff8800065bc740+0x02b8 0xffff8800073e0580
0xffff8800065bc9f8 = 0xffff8800073e0580

And thus gaining the root:

kdb> go
cbou:~$ id
uid=0(root) gid=0(root) groups=0(root)
cbou:~$ bash
root:~#

p.s. No distro enables kdb by default (although, with a nice KDB-over-KMS
feature availability, I would expect at least some would enable it), so
it's not actually some kind of a major issue.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
kdb: Categorize kdb commands (similar to SysRq categorization) 2014-11-11T15:31:52+00:00 Daniel Thompson daniel.thompson@linaro.org 2014-11-06T14:36:45+00:00 9452e977ac17caf9f98a91b33d5e3c3357258c64 This patch introduces several new flags to collect kdb commands into groups (later allowing them to be optionally disabled). This follows similar prior art to enable/disable magic sysrq commands. The commands have been categorized as follows: Always on: go (w/o args), env, set, help, ?, cpu (w/o args), sr, dmesg, disable_nmi, defcmd, summary, grephelp Mem read: md, mdr, mdp, mds, ef, bt (with args), per_cpu Mem write: mm Reg read: rd Reg write: go (with args), rm Inspect: bt (w/o args), btp, bta, btc, btt, ps, pid, lsmod Flow ctrl: bp, bl, bph, bc, be, bd, ss Signal: kill Reboot: reboot All: cpu, kgdb, (and all of the above), nmi_console Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 
This patch introduces several new flags to collect kdb commands into
groups (later allowing them to be optionally disabled).

This follows similar prior art to enable/disable magic sysrq
commands.

The commands have been categorized as follows:

Always on:  go (w/o args), env, set, help, ?, cpu (w/o args), sr,
            dmesg, disable_nmi, defcmd, summary, grephelp
Mem read:   md, mdr, mdp, mds, ef, bt (with args), per_cpu
Mem write:  mm
Reg read:   rd
Reg write:  go (with args), rm
Inspect:    bt (w/o args), btp, bta, btc, btt, ps, pid, lsmod
Flow ctrl:  bp, bl, bph, bc, be, bd, ss
Signal:     kill
Reboot:     reboot
All:        cpu, kgdb, (and all of the above), nmi_console

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
kdb: Remove KDB_REPEAT_NONE flag 2014-11-11T15:31:52+00:00 Anton Vorontsov anton.vorontsov@linaro.org 2014-11-06T14:36:44+00:00 e8ab24d9b0173ada3eeed31d7d7f982228efc2c5 Since we now treat KDB_REPEAT_* as flags, there is no need to pass KDB_REPEAT_NONE. It's just the default behaviour when no flags are specified. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 
Since we now treat KDB_REPEAT_* as flags, there is no need to
pass KDB_REPEAT_NONE. It's just the default behaviour when no
flags are specified.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
kdb: Use KDB_REPEAT_* values as flags 2014-11-11T15:31:51+00:00 Anton Vorontsov anton.vorontsov@linaro.org 2014-11-06T14:36:43+00:00 04bb171e7aa99dee0c92e772e4f66f8d5c1b4081 The actual values of KDB_REPEAT_* enum values and overall logic stayed the same, but we now treat the values as flags. This makes it possible to add other flags and combine them, plus makes the code a lot simpler and shorter. But functionality-wise, there should be no changes. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 
The actual values of KDB_REPEAT_* enum values and overall logic stayed
the same, but we now treat the values as flags.

This makes it possible to add other flags and combine them, plus makes
the code a lot simpler and shorter. But functionality-wise, there should
be no changes.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
kdb: Rename kdb_register_repeat() to kdb_register_flags() 2014-11-11T15:31:51+00:00 Anton Vorontsov anton.vorontsov@linaro.org 2014-11-06T14:36:42+00:00 42c884c10b775ce04f8aabe488820134625c893e We're about to add more options for commands behaviour, so let's give a more generic name to the low-level kdb command registration function. There are just various renames, no functional changes. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 
We're about to add more options for commands behaviour, so let's give
a more generic name to the low-level kdb command registration function.

There are just various renames, no functional changes.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
kdb: Rename kdb_repeat_t to kdb_cmdflags_t, cmd_repeat to cmd_flags 2014-11-11T15:31:51+00:00 Anton Vorontsov anton.vorontsov@linaro.org 2014-11-06T14:36:41+00:00 15a42a9bc9ffcff4315a7154313db08c6bf9ef11 We're about to add more options for command behaviour, so let's expand the meaning of kdb_repeat_t. So far we just do various renames, there should be no functional changes. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> 
We're about to add more options for command behaviour, so let's expand
the meaning of kdb_repeat_t.

So far we just do various renames, there should be no functional changes.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>